owner`s manual casement air conditioner
Contents
1. 13 Always turn off and unplug the unit before cleaning to avoid electrical shock CLEANING THE FILTER The air filter is removable for easy cleaning A clean filter helps to remove dust lint and other particles from the air A clean filter is also essential to maximize the cooling and operating efficiency of the air conditioner 1 Turn the unit off and unplug the unit 2 The air filter is located behind the air outlet front upper louvers 3 To remove the air filter using the levers move completely the left louver to the left and the right louver to the right then move both louvers down in order to clear the opening eine the filter tabs slide the air filter up 4 Gently clean with a vacuum cleaner or wash the filter in warm soapy water Rinse well and let it dry completely before putting it back 5 Put the filter back in place and reposition the louvers NOTE e A dirty air filter reduces air volume We recommend to clean the air filter every two weeks or more fre2. OWNER S MANUAL CASEMENT AIR CONDITIONER ye SY QQ QGQG GG LLL LL LL LLL LL LL s RRL LLL bL LL ktr str LL LL ws DONAAAAAAAAAAAAAAAAAAAA A AAAAAL A A QQ QQ LLL LL LLL LL RLLLLL LLL LLL LL LLL LL LL LLL LL L1 MODELS 13 04596 13 04597 SUNT ise Tradex Corp Wwww sunrisetradex com 3122 Bernard Pilon St Mathieu de Beloeil Qc J3G 4S5 Tel 450 586 2175 Fax 450 536 9081 Toll free 1 800 686 2175 Copyright Sunrise Tradex Corp 2006 00220 17 12 06 TA
3. the temperature LED display will alternate between C and F Decrease increase the hours when setting the timer for an automatic start or shut off of the air conditioner To set fan speeds AUTO LOW MEDIUM or HIGH each level is paired with an icon lighting on when selected To circulate only air in the room CLOSED or in and out of the room OPEN LED display shows all matching icons when mode or function are selected and shows the set temperature or set time when timer is on Control LED icons light on only when matching mode or operation is set Auto fan speed S lt Cooling TNF I Low fan speed J Fan only Display set temp Display set timer Cf Medium fan speed Timer eS On High fan speed F Energy saving 9 UNIT OPERATION e Plug the unit into a grounded outlet Do not use an extension cord nor an adapter plug e Press the ON OFF button to begin operation e When turning your air conditioner off always wait at least 3 minutes before turning it back on it will prevent the air conditioner from blowing a fuse or tripping a circuit breaker e Do not run your air conditioner in cooling mode when the outdoor temperature is below 19 C 66 F The internal evaporator will freeze up and the unit will not operate properly COOLING MODE 1 Press on MODE until the COOLING icon 3 lt lights on 2 Press or to set room temperature 19 to 31 C 66 to 88 F The set temperature
4. 586 2175 Fax 450 536 9081 Toll free 1 800 686 2175 WARRANTY LIMITED WARRANTY This air conditioner is covered by a warranty against defects in materials and workmanship including the compressor if used for the applications specified in this owner s manual for a period of two 2 YEARS from the date of original purchase in Canada Note The internal compressor is covered by a 5 YEAR limited warranty During the warranty period if this air conditioner fails under normal use SUNRISE TRADEX CORP will at its option either repair the unit or replace it free of charge within a reasonable period of time after the air conditioner is returned As a condition to any warranty service obligation the customer must present this warranty certificate along with the proof of purchase THIS WARRANTY DOES NOT COVER 1 Damage accidental or otherwise to the air conditioner that are not caused by materials or workmanship defect 2 Damage caused by misuse tampering or failure to follow the operating and maintenance instructions provided in this owner s manual 3 Damage to the finish of the unit enclosure or to other outer features caused by wear A Filter 5 Damage caused by repairs or modifications to the air conditioner made by any person not duly authorized by SUNRISE TRADEX CORP 6 Insurance and freight costs for the warranty service ALL IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY ARE LIMI
5. ILLUSTRATIONS MAY DIFFER FROM THE PRODUCTS Exterior air inlet YUUYUUUUUY AAAA vA SS IMSS a AARAAAAAR ii Y RRA MAS A vy SOEUR YUU UUUUY UNPACKING THE AIR CONDITIONER e Remove and save the shipping carton and packing materials for future storage or transport of the unit Otherwise dispose of packaging materials waste recycling where possible Remove tape and glue residue from surface before turning on the air conditioner Rub a small amount of liquid dish soap over the glue residue with your fingers Wipe with warm water and dry Do not use sharp instruments rubbing alcohol flammable fluids or abrasive cleaners to remove tape or glue These products can damage the surface of your air conditioner e Handle with care We recommend that 2 persons move and install this air conditioner ELECTRICAL REQUIREMENTS e The electrical ratings are listed on the rating plate of this air conditioner e Make sure to follow the requirements for the type of plug ending the power supply
6. cooling TEMPERATURE SETTINGS THERMOSTAT e This air conditioner is equipped with a built in thermostat that controls the cooling cycle compressor based on set temperature allowing to maintain room temperature Compressor cycles on and off and the fan operates continuously even when the compressor is off cycle is completed e Turn the THERMOSTAT TEMPERATURE rotary control to a mid setting 5 Then when necessary set the emperature to the desired level of room comfort by turning the THERMOSTAT control towards COOLER or counterclockwise for a warmer temperature e Changing too quickly and too frequently could result in blowing a fuse or tripping the circuit breaker Note Always turn the control knob slowly in order to allow unit to adjust to new setting AIR EXCHANGER e For maximum continuous cooling set the AIR EXCHANGER control to CLOSED it only circulates the air in the room e To draw stale or smoky air out of the room set the air exchanger control to OPEN it exhausts outdoor the air in the room e The Air Exchanger will function only when the fan is operating CHANGING AIR DIRECTION This air conditioner is designed with mobile air louvers to easily control the airflow direction Using the tabs of the louvers located on front top ot the air conditioner simply move the louvers in ay direction Louvers can be controlled separately
7. in FAN ONLY mode UNIT OPERATION ENERGY SAVING MODE Based on set temperature the fan cycles on and off along with the compressor This mode will result in large variations of room temperature and humidity It is recommended to use this mode when the room is unoccupied 1 Press on MODE and set until the ENERGY SAVING icon lights on 2 Press or to set room temperature The set temperature will show on the LED display It both keys are pressed at the same time the temperature LED display will alternate between C and F 3 Press on FAN SPEED to set fan speed at AUTO LOW MEDIUM or HIGH The matching LED icon will light on when selected NOTE The fan and the compressor may not cycle on and off simultaneously SETTING THE TIMER The timer is used to set an automatic start or shut off of the air conditioner Automatic start 1 Press on TIMER when the unit is OFF the TIMER icon C will light on 2 Press or to set the numbers of hours 1 24 before the automatic start 3 The LED display shows the time left in hours before the unit turns on 4 To cancel the timer press on TIMER again Automatic shut off 1 Press on TIMER when the unit is ON the TIMER icon will light on 2 Press or to set the numbers of hours 1 24 before the shut off 3 The LED display shows the time left before the unit turns off for only 12 seconds then LED shifts to display set temperature 4 To cancel
8. speed and coolest temperature and wait for frost to melt The unit will not operate properly when the outside temperature is below 19 C 66 F Make sure that there is no other appliance plugged on the same circuit nor connected to an extension cord Call SUNRISE TRADEX Customer Service Remove drain plug and base pan clean throughly If necessary replace drain plug The unit should slope slightly downward the outside half a bubble on the level Reposition or shim the unit if necessary Never dril a hole in the bottom of the metal base and condensate pan This would void warranty of the unit AIR CONDITIONER SELECTION GUIDE NOTE If room temperature is not within the unit working range it may not work properly data may vary from one model to another always refer to the rating label of the air conditioner AIR CONDITIONER SELECTION GUIDE COOLING SURFACE CAPACITY BTU H 9 14 m2 100 150 ft2 5 000 14 23m2 150 250ft 6 000 23 28m 250 300ft 6 500 28 33m 2 300 350ft 7 250 33 38 m 8 000 38 41 m 8 750 41 46 m 9 650 46 51m2 500 550ft 10 500 51 65 m 550 700 ft 12 500 65 93 m 700 1000 ft 15 000 CUSTOMER SERVICE Contact SUNRISE TRADEX Customer Service for e Replacement parts e Technical support e Warranty claims e Customer service SUNT ise Tradex Corp Www sunrisetradex com 3122 Bernard Pilon St Mathieu de Beloeil Qc J8G 4S5 Tel 450
9. ATION 16 WARRANTY eee eens 17 N WARNING Please read the following owner s manual before using this air conditioner This manual is not a contract and should be used as a reference guide only We reserve the right to make technical changes at all times without prior notice USE Thank you for purchasing this Casement Air Conditioner This unit is designed to improve indoor living and working comfort by providing cooling and ventilation with minimal installation SAFETY NOTES When using this window air conditioner or any other electric appliance always follow these basic safety precautions Not doing so could result in injuries electrical shocks or fire 1 The unit must be connected to a grounded three prongs power supply properly rated For your safety this unit is grounded through the power cord plug when connected to a grounded wall outlet 2 Do not alter the power cord nor the plug end by removing the ground prong 3 Itis recommended not to use an adapter plug or extension cord 4 Do not plug the unit in a damaged electrical receptacle 5 Do not connect the unit to an outlet that is being used for other electrical appliances 6 Before unplugging the unit always turn it off Always unplug the unit before cleaning or servicing When unplugging the unit never pull on the power cord always grip the plug 7 Do not start or stop the unit by plugging in o
10. BLE OF CONTENTS UE 3 PARETI NOTE een EE ee eee ner arene 3 INSTALLATION Accessories and hardware 4 Tools needed 4 Air conditioner diagram 5 Unpacking the air 5 Electrical requirement 5 Recommendations 5 Sliding window installation 6 7 8 Casement window installation _ 8 UNIT OPERATION Electronic control models LED display control panel _ 9 CC 10 10 Energy SAYING 11 Setting the 11 Air Exchanger vccsncs xoevennseseounensaeuseiaaceseuenciatens 11 Remote Control accscmavasonsironncen nevercndeiventendevass 12 Mechanical control models 13 CHANGING AIR DIRECTION 13 MAINTENANCE Cleaning the filter 14 Cleaning the 14 DICKS E 14 NOISE AND VIBRATION cees 14 TROUBLESHOOTING 15 AIR CONDITIONER SELECTION GUIDE 16 CUSTOMER SERVICE INFORM
11. SELECT THE FAN SPEED Press HGH MID LOW or press AUTO Note AUTO fan speed cannot be used in FAN ONLY mode TO SET THE TEMPERATURE Press the keys to set the temperature Each time you press or hold these buttons the temperature goes up or down by 1 TO SET THE TIMER e Automatic start time Press TIMER when the unit is OFF Then press the keys to set the numbers of hours 1 24 before the turn on Presss TIMER again to cancel the timer e Automatic shut off Press on TIMER when the unit is ON Then press the keys to set the numbers of hours 1 24 before the shut off Press TIMER again to cancel the timer 12 MECHANICAL CONTROLS OFE HIGH Mone Closed lt Open A Air Exchanger THERMOSTAT COOL LOW LOW WAIT THREE MINUTES BEFORE RESTARTING DIES EES FAN COOL MODE CONTROL Rotate the MODE control knob to turn the air conditioner on and set the COOLING SPEEDS or the FAN SPEEDS Set the knob to OFF to turn the unit off COOLING SPEEDS e HIGH COOL For an automatic maximum and quick cooling on extremely hot days Once room is cooled change cooling setting to MED or LOW COOL For NORMAL cooling e LOW COOL For NIGHTIME and or a SMOOTH cooling with minimum air circulation FAN SPEEDS e HIGH FAN For high velocity airflow without cooling e MED FAN Medium fan speed without cooling LOW FAN Lowest fan speed without
12. TED TO A TWO YEAR 2 PERIOD COVERED BY THIS EXPRESS LIMITED WARRANTY SUNRISE TRADEX CORP DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT SHALL SUNRISE TRADEX CORP LIABILITY EXCEEED THE RETAIL VALUE OF THIS AIR CONDITIONER FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY WITH RESPECT TO THIS AIR CONDITIONER Keep this owner s manual along with your proof of purchase in a safe place for future reference You must provide proof of purchase for warranty service Enter the following information on your air conditioner it will help you upon getting assistance or service if you ever need it You will have then to provide the model and serial numbers of the air conditioner these data are detailed on the rating plate of the unit Dealer name Address Model number Serial number Date of purchase
13. cord 125 V 103 5 min 126 5 max 0 15 A 15A time delay fuse or circuit breaker Do not connect to an outlet use by other appliances preferably use on a single outlet circuit e The air conditioner must be grounded it is equipped with a power supply cord ending with a grounded plug 3 prongs and must be plugged into a properly rated 3 prong grounded outlet e If you do not have a grounded outlet available contact a qualified electrician to have a grounded outlet properly installed e Do not alter the power supply plug by removing the ground plug RECOMMENDATIONS e This air conditioner is designed for an easy installation in a vertical window casement or sliding type It is not designed for single or double hung window e Make sure you install the air conditioner in a window that will hold the weight refer to the rating plate on your unit reinforce if necessary e Secure the unit as per the instructions Note Installation instructions described in this guide are for standard type windows Styles vary widely if necessary modify accordingly to the type and size of your window or have the unit installed by a skilled carpenter SLIDING WINDOW INSTALLATION 1 Choose the location 2 Open one window sash to install the support platform 3 Using the 2 x 7 16 screws the flat washers and the nuts loosely attach the support angle to the bottom of the platform Fig A 4 Place the support platform agai
14. e unit cool airflow 20 Do not put any combustion appliance in the direct path of the unit airflow it could affect the combustion efficiency ACCESSORIES PRODUCTS MAY DIFFER FROM THE LINE ARTS Before beginning to install make sure to have close at hand all the tools you will need listed below and that all accessories and hardware parts provided with your air conditioner as shown are all included 3 8 screw 4 Nut 2 1 self tapping screw 4 Q Washer 2 7 16 screw 2 Locknut amp leveling bolt 1 LZ Support platiorm 1 Filler panel 1 HA Speed clips 2 Side mounting rail 2 Support angle 1 factory installed SS si Slider 2 Top mountaing rail 1 factory installed Bottom mounting rail 1 factory installed Long seal 2 Top retainer Side seal 2 n Foam seal 1 factory installed Tools needed A Level B Gloves C Flat blade and Phillips screwdrivers D Utility knife or scissors E Drill with 1 8 bit F Safety glasses G Measuring tape Spare screws not shown 4 UNIT DIAGRAM Air exchanger Control panel Enclosure Horizontal air vent Interior air outlet Vertical air vent Air filter under the louvers SSS l i I HES Interior air inlet grille Front mn
15. ing rail fig Window sash frame 15 Insert the sliders upward making 3 8 screws sure the filler panel aligns in sliders 16 With sliders up against top retainer drill on each side a 1 8 hole through the window frame in alignment with the pre drilled holes in the sliders Insert 3 8 screws and tighten Drilled hol s e Make sure all seals and accessories Sp ed clips are correctly fitted Note 3 8 Screws e To eliminate air or insect intrusion use the balance of the seal provided with your air conditioner to fill in any left opening not properly covered lt N val KF ae p3 r 4 lt lt lt A eae fio ae LZ J PS ee z aD 4 CASEMENT WINDOW INSTALLATION AFoam seal e This air conditioner is designed to fit into most casement type windows with a minimum opening of 15 1 2 wide x 22 high e For safety reasons ideally the unit should be installed in a closed or fixed window e However if the unit has to be installed in an open window frame the window should be secured from the outside or completely removed 1 Closed or fixed window Ideally install the air conditioner in a close or fixed window sash If the unit is to be installed in or next to a movable sash remove catch and handle e Secure the window in closed position e Remove the glass panes and parting strips to the height necessary to
16. install the unit Install the air conditioner as per the instructions described for the sliding windows 2 Open window frame e Remove handle mechanism and catch Open the window sash back against the building exterior wall e Secure the window or remove completely where possible Install the air conditioner as per the instructions described for the sliding windows Note A filler panel will be required if the window opening is larger than 15 1 2 The panel should made of wood 3 4 thickness and should run full length of window e Securely anchor the panel to one side of the window Important For wood frame casement windows it could be necessary to build a wood frame 1 minimum thickness with a 15 1 2 opening e Securely fix and seal the wood frame into the window opening e Follow usual instructions for installing the air conditioner LED DISPLAY CONTROL PANEL FAN PEED ON OFF Closed gt Open Air Exchanger TIMER WAIT THREE MINUTES BEFORE RESTARTING MODE EG Press this button to choose one of the following modes COOLING FAN ONLY ENERGY SAVING A matching icon lights on when mode is selected Allow 3 minutes for operations to resume when switching to a new mode Decrease increase the degrees by 1 when setting the temperature in COOLING and ENERGY SAVING modes If both keys are pressed at the same time
17. nst the lower window track and the vertical edge of the window frame 5 Using 2 x 1 self tapping screws fix the platform on the window sill If necessary install a 2 wide shim on the window sill The length of the shim should be the same as the width of the support platform and should be flush with the back edge of the sill The thickness should be gauged on the gap to fill in beetween the support platform and the window track Fig B 6 Pull the support angle against the outside structure Tighten the 2 x 7 16 screws on top of the support platform 7 Adjust leveling bolt until the sup port angle is correctly level Secure the leveling bolt with the locknut Important 7 16 screws TT Support ae platform m Support angle Leveling bolt 1 self tapping screws Support platform assembly Lower window Te a frame e The unit must be level or tilted back slightly to facilitate water drainage Do not drill a hole in bottom pan This air conditioner is designed to operate with approximately 1 2 of water in bottom pan 8 e Cut two pieces of adhesive foam seal to the height of the window Foam sea Top retainer opening e Remove the backing and apply on o the inside edges of the vertical niei peng window sash frame fig C Slider 9 Put the unit on the support platform e Check for the uni
18. ooling is not efficient The unit starts and stops fre quently or frequently blows fuses or trips the circuit breaker Water drips from unit into the house Is the unit plugged in Is the main power supply on Is there a power failure 2 Securely plug the power cord into the wall outlet Re establish the main power supply Wait for power to restore When power is back wait 3 minutes before starting the unit Is the timer on some models Change time settings Is the airflow restricted 2 Is the air exchanger set to OPEN 2 Clear out the air inlets and outlets curtains blinds etc Set the air exchanger to CLOSED Is there any other heat source in the room Close or move the heat source Is the air filter dirty Clean the air filter Is the set temperature suitable 2 Change set temperature set temperature Is the fan speed set at low or in Energy Increase the fan speed or change Saving mode the unit mode Check the room cooling chart at the Is the unit capacity adequate end of this user s guide Is the unit freezing up ice blocking the airflow Is the outdoor temperature within the unit working range 2 Is the unit plugged alone or connected to an extension corde The internal evaporator and outside condenser coils look dirty or obstructed by debris Mold mildew or algae formation on wet surfaces Is the unit correctly installed and properly leveled 2 Set highest fan
19. quently if there are animals around e Never run the air conditioner without the air filter e Do not clean the air filter in the dishwasher nor use chemical products or abrasive detergents CLEANING THE HOUSING 1 Turn the unit off and unplug the unit 2 Wipe the surface of the unit with a soft damp cloth Never immerse the unit 3 Air dry completely and reconnect the unit 4 Never use gasoline paint thinner other chemical products or abrasive detergents it could damage the finish of the unit STORAGE 1 Set the air conditioner to fan mode for about 3 hours to completely dry out the inside of the unit 2 Turn off and unplug the unit 3 Clean the filter and the housing 4 Store the unit upright in a clean and dry area 5 It is recommended to store the unit in its original packing box 6 If the unit is installed permanently during winter protect it with a heavy duty cover it will reduce air drafts as well as paint and finish damages NOISE AND VIBRATION When the air conditioner is in good working conditions it may produce the following noises or vibrations e Pinging or clicking noise caused by water dropping on the condenser e The relay clicking when the compressor cycles on and off e Clicks from the thermostat cycle e Vibrations or noises due to poor wall or window construction 14 TROUBLESHOOTING Before getting service please check the following PROBLEM Unit does not operate Air c
20. r pulling out the power cord 8 Always check the power cord for signs of damage before use If the power cord is damaged contact SUNRISE TRADEX Customer Service see end of this manual Do not install or use the unit in the following places e near a heat source e an area with possible gas leakage or in an explosive atmosphere e near a bath shower enclosure swimming pool or any other steamy and wet areas e in a greenhouse 10 Do not apply insecticides or any other flammable products on the unit 11 Do not operate with wet hands or spray water or other liquid on the unit nor immerse the appliance 12 This unit is not intended for the use of children and close supervision is necessary when it is operating near children 13 Never insert fingers foreign objects or anything to obstruct the air inlet and outlet grills Warn children 14 Never operate with an outside protective cover in place or other objects blocking the outside airflow 15 For a maximum efficiency do not block inside airflow with curtains blinds furniture or else 16 Do not expose skin or eyes directly to cool air over a long period of time 17 Ensure that all parts and accessories are correctly fitted before turning on the unit 18 If an abnormal odour or smoke comes out of the unit immediately unplug the unit and contact SUNRISE TRADEX Customer Service see end of this manual 19 Do not place a plant or allow a pet to be exposed directly to th
21. t side rail to butt against the edge of the window vertical frame If the unit side rail does not Foam sea correctly fit remove the unit and adjust leveling bolt 10 Drill 2 x 1 8 holes through the window sash frame in alignment with the holes in the unit bottom rail factory installed e Insert 2 x 3 8 screws through these holes If the window sash frame is not long enough to use the pre drilled holes drill new holes off and attach the bottom part of the air conditioner to the support platform e The air conditioner should be firmly anchored to window rail frame or support platform Fig D 11 Close the window e Check for the inside edge of window vertical frame to close tightly on side of unit e Cut remaining adhesive foam seal to width of the window opening e Remove backing and fix it into inside edge of the top window frame Fig C 12 Secure the installation by fixing the speed clips on the inside edge of the window top and bottom frame fig E next page 13 Cut a seal to proper length and D insert it between the inside and the outside window sash Support platform fig E next page 14 Place the top retainer on the top Drilled holes edge of the filler panel e Then place the bottom edge of the filler panel Into the groove of the ple ___ unit bottom mounting rail I The filler panel should be trimmed to tightly fit in the window opening p Bottom mount
22. the timer press on TIMER within the 12 seconds AIR EXCHANGER e For maximum continuous cooling set the AIR EXCHANGER control to CLOSED it only circulates the air in the room To draw stale or smoky air out of the room set the air exchanger control to OPEN it exhausts outdoor the air in the room Note the Air Exchanger will function only when the fan is operating 11 REMOTE CONTROL NOTE Remote control may differ from illustration POWER turns the unit on or off TIMER to set timer on or off MODE to set operation mode POWER SAVER sets the unit in AUTO fan speed automatic mode ENERGY SAVING mode HIGH highest fan speed MID medium fan speed KEYS to set room temperature in cooling mode or to set time when Timer is on LOW lowest fan speed 2 x AA 1 5V batteries included power the remote control e Do not use rechargeable batteries How to insert the batteries e Following the arrows shown in the figure remove the battery cover e Insert the 2 batteries making sure that the terminals are correctly fitted e Put the cover back into position USING THE REMOTE CONTROL e Always line up the remote signal transmitter with the unit signal receiver on the front panel TO TURN THE AIR CONDITIONER ON OR OFF press on POWER SELECT THE MODE Press MODE to set the unit in COOLING mode or press POWER SAVER to set the air conditiioner in ENERGY SAVING mode TO
23. will show on the LED display If both keys are pressed at the same time the temperature LED digplay will alternate between C and F 3 Press on FAN SPEED to set fan speed at AUTO LOW MEDIUM or HIGH The matching LED icon will light on when selected AUTO This automatically sets the fan speed to provide an optimum comfort level based on the set temperature The fan speed will increase or decrease in order to adjust the cooling airflow as per the set temperature This level can be activated only when in COOLING mode It cannot be activated in FAN ONLY mode LOW N Fan speed lowest level for NIGHTIME and or a SMOOTH cooling MEDIUM 6 Fan speed medium level for NORMAL cooling HIGH R High velocity airflow for a MAXIMUM and FAST cooling e For maximum cooling efficiency draw the curtains or blinds if the room is exposed to direct sunlight Do not place near a heat source e f the air conditioner is turned off or switched on from FAN ONLY or ENERGY SAVING mode upon turning the unit on to COOLING mode allow a 3 minute delay before the compressor and cooling operation resume FAN ONLY MODE The FAN ONLY mode provides ventilation and air filtration without cooling When using this mode the temperature settings cannot be adjusted 1 Press MODE until the FAN ONLY icon A lights on 2 Press on FAN SPEED and set to LOW MEDIUM or HIGH The matching LED icon will light on when selected NOTE The AUTO fan speed cannot be used
Download Pdf Manuals
Related Search