Home

Manual for this model - Viking Security Safe

image

Contents

1. VIKING SECURITY SAFE BIOMETRIC FINGERPRINT LCD KEYPAD SAFE Body Material VS 12BL WALL SAFE VS 14BL TOP OPENING DRAWER SAFE VS 20BLX MINI VS 25BL VS 25DBL SMALL DEPOSITORY SAFE VS 35BL VS 38BL EXTRA WIDE LAPTOP SAFE VS 50BL LARGE VS 52BL HIDDEN WALL SAFE VS 52BLX HIDDEN WALL SAFE LASER CUT Steel Can be open by Fingerprint PIN code Key Optical Sensor 500 DPI opens in fraction of a second Fingerprint Entry Stores up to 32 fingerprints Memory Non volatile memory stored information is retained if batteries are removed Key Pad Entry Opens with 4 8 digits PIN code Locking System Motorized door deadbolt lock High Security Keys 4 prong cross keys Two included LCD display Battery Level indicator Data Count indicator OK and Error indicator etc Sounds Mode On and OFF operational sounds Warning sound Safe starts beeping if door is left unlocked for more than 1 minute Time Out Operation is put on HOLD for 2 minutes if multiple incorrect PIN or fingerprints are input LED light Build in LED light operates independently with 2 AA batteries Warranty One Year Limited Warranty Batteries 4AA Included Accessories Mounting hardware and batteries Fireproof No Door Thickness 5mm Body Thickness 2mm DISCLAIMER Not recommend for age groups 55 and above Due to thinning fingerprints ALL fingerprint
2. Data Count Indicator Battery Indicator Key Pad Star Button Pre Scan Pound Button Logo Plate and Key Access 9090090000000 1 BEFORE FIRST USE 1 1 Unlock the safe with key Keyhole is located under the Logo Plate Remove using Allen Key 1 2 Install 4 AA batteries in battery compartment 1 3 Install 2 AA batteries in LED light O see point 9 for instructions www vikingsecuritysafe com vikingsecuritysafes live com 650 539 9482 page 2 4 2 HOW TO RESET SAFE TO FACTORY DEFAULT SETTINGS 2 1 PRESS and HOLD down red button O for 10 seconds INIT flashes on LCD display followed by OK Safe is reset to Factory Default All data is deleted and you can begin new registration when red light comes on 3 HOW TO REGISTER FINGERPRINTS ON FINGERPRINT SCANNER 3 1 To register fingerprints PRESS BRIEFLY red button As soon as red light comes on press your fingerprint on the Glass Fingerprint Scanner Q LCD screen will display OK battery indicator and data count indicator 1d 01 3 2 If the registration fails Err will be displayed on LCD screen Register the same finger again by repeating Step 3 1 3 3 Repeat Step 3 1 with the same fingerprint but change fingerprint position on the Glass Fingerprint Scanner left right up down to the side Note The more times and various positions you program one fingerprint the more likely it is to op
3. TH A KEY 7 1 Insert the key in the keyhole and rotate to the right clockwise to unlock and back to the starting lock position to lock the safe 8 HOW TO TURN SOUNDS ON OFF 8 1 SOUNDS ON Press 1 amp star button you will hear a long beep sound is on 8 2 SOUNDS OFF Press 0 amp star button the sound is off 9 HOW TO INSTALL CHANGE BATTERIES ON LED LIGHT 9 1 Unscrew the little bolt Remove the LED light carefully Put 2 fresh AA batteries on the back of the light Insert LED light back in the safe Note 2 AA batteries are provided and have to be installed www vikingsecuritysafe com vikingsecuritysafes live com 650 539 9482 page 3 4 MOUNTING INSTRUCTIONS It is recommended to bolt down the safe Note The safe may be mounted to a wall or floor Be aware of the load bearing Failure to do so can result in personal injury and or damage to property Use appropriate tools when performing work and always use eye protection Wall Mounting Do not mount the safe without anchoring to the wall Mounting Holes Find the studs in the wall at your desired location Most studs are oe 16 inches or 24 inches apart o gt Check the wall for concealed wires or pipes Measure the location of the pre set drill holes mark their exact position onto the wall ensuring that the studs or anything else behind will not interfere Drill the appropriate size holes for the anchors you are using Carefu
4. en in an emergency 3 4 To register a completely different fingerprint repeat Step 3 1 w id i Fingerprint tock a m o aa DOD 4 HOW TO REGISTER CHANGE PIN CODE ON KEYPAD Note Start with Factory Default PIN 1234 if safe is new or reset Register New PIN code using 4 8 digits If you want to change already registered PIN follow the same steps beginning with your Registered PIN and changing it to the New PIN Test both PIN codes Only Registered PIN code should open the safe 4 1 Punch in the PIN and HOLD DOWN star button until underscore _ is displayed on the LCD screen 4 2 Immediately punch in the New PIN code and press star button Underscore _ is displayed again Punch in the New PIN again and press star button again An OK will display after the PIN is input twice New PIN is registered Test with New PIN as well as with Old PIN 5 HOW TO UNLOCK AND LOCK THE SAFE WITH YOUR 6 HOWTO UNLOCK AND LOCK THE FINGERPRINT SAFE WITH PIN CODE 5 1 UNLOCK Press pound button When red light comes on 6 1 UNLOCK Punch in a registered PIN press a registered fingerprint on the Glass Fingerprint Scanner code and press star button Battery indicator and data count indicator 1d 01 will display 6 2 LOCK Press either star button or on LCD screen Safe is Unlocked pound button 5 2 LOCK Press either star button or pound button 7 HOW TO UNLOCK AND LOCK THE SAFE WI
5. lly press the anchor into the holes at this time Actual Model may vary Mount the safe by running screws from inside of the safe and securing to anchors ensure the safe is mounted securely Floor Mounting Use proper drill tools depending on the type of floor you are mounting the safe wood tile or concrete Measure the location of the pre set drill holes mark their exact position onto the floor Drill the appropriate size holes for the anchors you are using Carefully press the anchor into the holes at this time Mount the safe by running screws from inside of the safe and securing to anchors ensure the safe is mounted securely CARE AND MAINTENANCE Use a dry cloth to remove any smudges or prints off the Fingerprint Scanner after use Use gentle cleaning agents to clean the safe and Glass Fingerprint Sacnner Test registered fingerprints and PIN code every 6 months Keep liquids away from the control panel Spills on the control panel will cause damage and possibly electric shock Secure safe in a proper area to prevent from falling and causing damage or injury DO NOT disassemble the product For all repairs contact Viking Security Safe Customer Service WARNING Never store firearms and ammunition together The safest protection against accidents involving children is to store your firearm unloaded in an approved Firearm Safety Lock Box with ammunition stored separately VIKING SECURITY SAFE www vikingsecuritysafe com
6. readers will lose accuracy with increasing age www vikingsecuritysafe com vikingsecuritysafes live com 650 539 9482 VIKING SECURITY SAFE USER S MANUAL IMPORTANT Operational sounds can be switched ON and OFF However Warning Beep sounds if safe is left UNLOCKED for longer than 1 minute If the safe is in lock state locking bars sticking out Red Button A is NOT functional You cannot erase fingerprint data program the safe nor do any operation Remember to program the same fingerprint in multiple positions Remember to register new PIN code so safe can no longer be open with factory default PIN 1234 If safe is reset to factory default mode any fingerprint and default PIN code can open the safe Test with non registered fingerprints and PIN code If safe opens the safe is still in factory default mode Time Out Period locks the safe for 2 minutes if multiple incorrect PIN codes or fingerprints are input LCD displays HOLD Err Test the keys and store them in a secure place NOT inside of the safe When the screen shows _ please change the battery All registered fingerprints and PIN will be saved DISCLAIMER Not recommend for age groups 55 and above Due to thinning fingerprints ALL fingerprint readers will lose accuracy with increasing age GENERAL DESCRIPTION Initialization Reset Red Button Battery Compartment Locking Bars LED light Motorized Door Fingerprint Scanner LCD display
7. vikingsecuritysafes live com 650 539 9482 page 4 4

Download Pdf Manuals

image

Related Search

Related Contents

Zebra MC40  電気温水器 - 日本イトミック  ECOLEAN - EAC/EAR Manuel d`installation et de  Samsung WD7704C8C دليل المستخدم  

Copyright © All rights reserved.
Failed to retrieve file