22LR PRACTICE KIT
Contents
1. 8 in Safeties Manual safety which lowers the hammer when cocked Automatic firing pin safety Slide Light aluminum alloy Barrel Steel Finish Anodized oxydation on aluminum parts Blueing on steel parts Magazine External part in techno polymer Internal part in steel WARRANTY AND EXTENSION OF THE WARRANTY REPAIR PERIOD The Warranty and extension of the Warranty repair period is packed with your new Beretta pistol Please refer to the WARRANTY and the instructions given on it in case Warranty service is required NOTICE Wholesalers dealers or gunsmiths unless they are a Repair Station authorized by the Manufacturer and or by its Local Official Distributors are not authorized to make any Warranty repair or adjustment on behalf of the Manufacturer NOTICE The Warranty is effective only for the original retail purchaser of the firearm 14 BE RETTA Fabbrica d Armi Pietro Beretta S p A 18 ao 90078 25063 GARDONE VAL TROMPIA Brescia Italia Tel 030 8341 1 info beretta com ta www beretta com scene ENT2. clean cotton patch soaked in Beretta oil or a good grade gun oil Lightly oil the outside of the barrel the barrel guides and the frame rails SLIDE Clean the slide with a patch and Beretta oil or a good grade gun oil paying special attention to the breech face and extractor slide rails and underside of the breech If necessary use the supplied brush Wipe slide surfaces with a clean patch Lightly oil the slide RECOIL SPRING AND SPRING GUIDE Lightly oil the recoil spring and spring guide with Beretta oil or a good grade gun oil After long use it could be necessary to first scour these parts using the supplied brush 13 MAGAZINE Make sure the magazine is thoroughly clean and the follower slides easily downward if pressed f necessary lightly oil with Beretta oil or a good grade gun oil the internal walls of the magazine box e Run a dry patch through the box Do not leave lubricant inside the magazine box CAUTION Do not apply excess oil Accumulation of oil attracts dirt and dust which can interfere with the functioning and reliability of the firearm DATA AND FEATURES Caliber 22LR Operation Semi automatic Locking system Blow back Barrel length 130 mm 5 1 in Rifling Pitch R H 6 grooves Pitch 406 mm 16 in Front sight Blade integral with slide Rear sight Fully adjustable On request notched bar dovetailed to slide Sight radius 172 mm 6
3. it is your responsibility to ensure that the shot does not cause unintended injury or damage 2 ALWAYS TREAT A FIREARM AS IF IT WERE LOADED Never assume that a firearm is unloaded The only certain way to ensure that a firearm has the chamber empty is to open the chamber and visually examine the inside to see if a round is present Removing the magazine will not guarantee that a firearm is unloaded or cannot fire Shotguns and rifles can be checked by cycling or removing all rounds and by then opening and inspecting the chamber and the magazine tube for any remaining rounds 3 STORE YOUR FIREARM SO THAT CHILDREN CANNOT GAIN ACCESS TO IT It is your responsibility to insure that children under the age of 18 or other unauthorized persons do not gain access to your firearm To reduce the risk of accidents involving children unload your firearm lock it and store the ammunition in a separate locked location Please note that devices intended to prevent accidents for example cable locks chamber plugs etc may not prevent use or misuse of your firearm by a determined person Steel gun safes may be more appropriate to reduce the likelihood of intentional misuse of a firearm by an unauthorized child or person 4 NEVER SHOOT AT WATER OR AT A HARD SURFACE Shooting at the surface of water or at a rock or other hard surface increases the chance of ricochets or fragmentation of the bullet or shot wh
4. on page 3 READ THIS MANUAL CAREFULLY BEFORE USING THE FIREARM ALWAYS KEEP THIS MANUAL WITH YOUR FIREARM INCLUDE IT WITH THE PISTOL WHEN IT CHANGES OWNERSHIP OR WHEN IT IS LOANED OR PRESENTED TO ANOTHER PERSON THIS MANUAL SHOULD ALWAYS BE ACCOMPANIED BY THE INSTRUCTION MANUAL OF THE BASE PISTOL SERIES 92 NOTICE The Manufacturer and or its Local Official Distributors assume no responsibility for product malfunction or for physical injury or property damage resulting in whole or in part from criminal or negligent use of the product improper or careless handling unauthorized modifications use of defective improper hand loaded reloaded or remanufactured ammunition customer abuse or neglect of the product or other influences beyond manufacturer s direct and immediate control In addition to the Basic Safety Rules there are other Safety Rules pertaining to the assembly disassembly and maintenance of this firearm located throughout this manual CONTENTS BASIC SAFETY RULES BASIC SAFETY RULES 1 NEVER POINT A FIREARM AT SOMETHING THAT IS NOT SAFE TO SHOOT Never let the muzzle of a firearm point at any part of your body or at another person This is especially important when loading or unloading the firearm When you are shooting at a target know what is behind it Some bullets can travel over a mile If you miss your target or if the bullet penetrates the target
5. 22LR PRACTICE KIT PER PISTOLE BERETTA SERIE 92 FOR BERETTA 92 SERIES PISTOLS POUR PISTOLETS BERETTA SERIE 92 WA Allegato al Manuale di Istruzione delle pistole serie 92 Enclosed to the Instruction Manual of 92 series pistols Annexe au Mode d Emploi des pistolets s rie 92 BE RETTA Le illustrazioni e descrizioni di questo opuscolo si intendono fornite a titolo indicativo La Casa si riserva pertanto il diritto di apportare ai suoi modelli in qualsiasi momento e senza preavviso quelle modifiche che ritenesse utili per migliorarli o per qualsiasi esigenza di carattere costruttivo e commerciale The illustrations and descriptions given in this brochure are intended as a general guide only and must not be taken as binding The Company therefore reserves the right to make at any moment and without notice any changes it thinks necessary to improve its models or to meet any requirements of manufacturing or commercial nature Les illustrations et les descriptions contenues dans ce prospectus ne sont donn es qu titre indicatif La Maison se r serve le droit de modifier tout moment et sans pr avis ses mod les pour les am liorer ou pour n importe quelle exigence de caractere constructif et commercial Beretta Pubblicit C59758 Printed in Italy 12 2001 batan Gardone V T Fig 1 Fig 2 Fig 3 Illustrations
6. country Always ensure that you are complying with local state and federal laws before installing the Practice Kit NOTICE On D models the hammer never stays cocked following the slide forward to come to rest in the uncocked position Do not manually pull the hammer to the rear and release doing so will damage the firing pin and firing pin block mechanism 10 HOW THE FUNCTIONING AND THE CHARACTERISTICS OF THE PRACTICE KIT COMPARE TO YOUR 92 BERETTA PISTOL NOTICE The photographs ofthe Practice Kit are on page 3 The SLIDE is made of a lightweight aluminum alloy The FS style manual safety can also be operated to manually decock the pistol The automatic and visible firing pin block mechanism is also present The slide features a fixed blade front sight and the rear sight can be fully adjustable or on request notched bar dovetailed to slide The BARREL chambered for the 22LR cartridge does not have a locking block and the locking block plunger The Practice Kit features a BLOW BACK LOCKING SYSTEM Due to the relatively low working pressure of the 22LR caliber the Practice Kit does not require a locked breech TECHNO POLYMER MAGAZINE The 22LR magazine has a 10 shot capacity The external part is made of techno polymer while the internal part is made of steel The magazine follower is also techno polymer Before INSERTING A LOADED MAGAZINE it is advisable to lock the slide in the open position by
7. d inside the barrel due to defective or improper ammunition 7 USE PROPER AMMUNITION Only use factory loaded new ammunition manufactured to industry specifications CIP Europe and elsewhere SAAMI U S A Be certain that each round you use is in the proper caliber or gauge and type for the particular firearm The caliber or gauge of the firearm is clearly marked on the barrels of shotguns and on the slide or barrel of pistols The use of reloaded or remanufactured ammunition can increase the likelihood of excessive cartridge pressures casehead ruptures or other defects in the ammunition which can cause damage to your firearm and injury to yourself or others nearby 8 ALWAYS WEAR PROTECTIVE GLASSES AND EARPLUGS WHEN SHOOTING The chance that gas gunpowder or metal fragments will blow back and injure a shooter who is firing a gun is rare but the injury that can be sustained in such circumstances is severe including the possible loss of eyesight A shooter must always wear impact resistant shooting glasses when firing any firearm Earplugs help reduce the chance of hearing damage from shooting 9 NEVER CLIMB A TREE FENCE OR 10 11 12 OBSTRUCTION WITH A LOADED FIREARM Open and empty the chamber of your firearm and engage the manual safety before climbing or descending a tree or before climbing a fence or jumping over a ditch or obstruction Never pull or push a loaded firearm toward yourself or anothe
8. ich can result in the projectile striking an unintended or peripheral target 5 KNOW THE SAFETY FEATURES OF THE FIREARM YOU ARE USING BUT REMEMBER SAFETY DEVICES ARE NOT A SUBSTITUTE FOR SAFE HANDLING PROCEDURES Never rely solely on a safety device to prevent an accident It is imperative that you know and use the safety features of the particular firearm you are handling but accidents can best be prevented by following the safe handling procedures described in these safety rules and elsewhere in the product manual To further familiarize yourself with the proper use of this or other firearms take a Firearms Safety Course taught by an expert in firearms use and safety procedures 6 PROPERLY MAINTAIN YOUR FIREARM Store and carry your firearm so that dirt or lint does not accumulate in the working parts Clean and oil your firearm following the instructions provided in this manual after each use to prevent corrosion damage to the barrel or accumulation of impurities which can IN prevent use of the gun in an emergency Always check the barrel prior to loading to ensure that it is clean and free from obstructions Firing against an N obstruction can rupture the barrel and injure yourself or others nearby In case you hear an unusual noise when shooting stop firing immediately engage the manual safety and unload the firearm Make sure the chamber and the barrel are free from any obstruction or possible bullet blocke
9. llows ELEVATION To raise the point of impact on the target turn the upper screw UP counter clockwise using the sight tool supplied Proceed one notch click of the Screw at a time so that the finest adjustment is obtained To lower the point of impact on the target turn the upper screw clockwise WINDAGE To move the point of impact on the target to the right turn the side screw clockwise proceeding one notch at a time so that the finest adjustment is obtained To move the point of impact on the target to the left turn the side screw counter clockwise MAINTENANCE Every day the pistol is fired or at least once a month cleaning and lubricating is recommended CLEANING AND LUBRICATING BARREL e Spray the supplied brush with Beretta oil or good grade gun oil Insert the brush into the barrel from the chamber and scrub the chamber and bore thoroughly If necessary first clean the bore with a gun solvent Dry the chamber and bore by pushing a cotton patch through the chamber and bore with the brush Change the patch until it emerges clean CAUTION Do not push the cleaning brush from the muzzle end toward the barrel if the barrel is still assembled on the pistol Cleaning the barrel from the breech chamber end will avoid damaging the muzzle or bore Clean the barrel guides and the frame rails with soft patch soaked a gun solvent Lightly oil the inside of the barrel by passing through it a
10. manually lifting the slide catch NOTICE The use of the magazine loader is recommended Insert the loader from the top of the magazine attachment ring pointing downwards and engage the loader tab with the follower Fig 4 and 5 NOTICE To optimize the functioning of the Practice Kit Beretta recommends the use of High Velocity or Hyper Velocity ammunition 11 ASSEMBLY AND DISASSEMBLY NOTICE It is advisable to carry out the assembly and the field stripping operations over a table to catch components should they drop CAUTION It is recommended to wear protective glasses when performing the assembly and the field stripping operations Remove the magazine and the original slide and grip the pistol s frame See instructions for disassembly in your original 92 pistol model s instruction manual Assemble the Practice Kit slide barrel assembly with the recoil spring and recoil spring guide by sliding it onto the slide rails of the frame and pulling it backwards until it stops Manually rotate the disassembly latch 90 degrees upward In order to disassemble the Practice Kit please refer to your original 92 pistol model s instruction manual HOW TO ADJUST THE REAR SIGHT 6 only for models supplied with adjustable sight Adjustment of rear sight is done aligning front and rear sight on the mark See Fig below 12 To modify the rear sight adjustment proceed as fo
11. r person AVOID ALCOHOLIC BEVERAGES OR JUDGMENT OR REFLEX IMPAIRING MEDICATION WHEN SHOOTING Do not drink and shoot If you take medication that can impair motor reactions or judgment do not handle a firearm while you are under the influence of the medication NEVER TRANSPORT A LOADED FIREARM Unload a firearm before putting it in a vehicle chamber empty magazine empty Hunters and target shooters should load their firearm only at their destination If you carry a firearm for self protection leaving the chamber unloaded can reduce the chance of accidental discharge LEAD WARNING LOADED Discharging firearms in poorly ventilated areas cleaning firearms or handling ammunition may result in exposure to lead and other substances known to cause birth defects reproductive harm and other serious physical injury Have adequate ventilation at all times Wash hands thoroughly after exposure DESCRIPTION The 22LR Practice Kit for the Beretta 92 series pistols is perfect for target practice and plinking with these full size large caliber pistols The Kit includes a steel 22LR caliber barrel lightweight aluminum alloy slide with FS type safety and firing pin block device recoil spring guide recoil spring magazine loader and one techno polymer 10 round magazine NOTICE The installation and use of the Practice Kit are subject to the laws governing firearms that may vary from country to
Download Pdf Manuals
Related Search