Installation Manual
Contents
1. Bolt must be LL centered in hole CAUTION For secure arm attachment and to avoid equipment damage plate d must make contact with underside of desk on both sides of the hole CAUTION For Desk Clamp installations Do Not rotate display past edge of desk 888 45 175 W 01 rev F 12 14 3 12 Attach Display 4x UD M4 x 10mm WARNING Stored Energy Hazard The arm mechanism is under tension and will move up rapidly on its own as soon as attached equipment is removed For this reason DO NOT remove equipment unless the arm has been moved to the highest position Failure to follow this instruction may result in serious personal injury and or equipment damage 4 12 888 45 175 W 01 rev F 12 14 Attach Notebook a A Attach portrait landscape rotation stop screw M4 x 10mm M4 x 10mm A Place Notebook D Place docking station and notebook e 888 45 175 W 01 rev F 12 14 5 12 Place Notebook A Pa ds will help prevent notebook from slipping but they will not hold all notebooks on the 2x tray in all circumstances Use caution while tilting the tray since some angles may cause the notebook to fall off resulting in equipment damage or personal injury Mee a C b 6 12 888 45 175 W 01 rev F 12 14 oct va 8 uoo i 8 12 180 WARNING Desk Clamp Installations The range of motion side to side for two Extensions A2. ERGOTROI T User s Guide LX Dual Desk Mount Arm A 5 20 Ibs 2 3 9 1 kg 5 20 Ibs 2 3 9 1 kg TT 0 5 12 Ibs 2 3 9 1 kg 0 23 5 4 kg gt gt Quem EZ gt In E pa a pm 1 3 LE M4 x 10mm Includes Constant Force For the latest User Installation Guide please visit www ergotron com Gu a del usuario Espa ol Manuel de l utilisateur Francais Technology Benutzerhandbuch Nederlands Guida per l utente Italiano UUUUUUU ul 0000 UU User s Guide English O Gebruikersgids Deutsch Anv ndarhandbok svenska 888 45 175 W 01 rev F 12 14 qe www ergotron com USA 1 800 888 8458 N Europe 31 0 33 45 45 600 w China 86 769 86018920 1 12 Hazard Sym bols Signal Word Level of Hazard levi ew A NOTE indicates important information that helps you NOTE l make better use of this product These symbols alert users of a safety condi tion that demands attention All users should A CAUTION indicates either potential damage to be able to recognize and understand the CAUTION hardware or loss of data and tells you how to avoid the significance of the following Safety Hazards poem if encountered on the product or within the A WARNING indicates either potential for property dam documentation Children who are not able age personal injury or death to recognize ano respond appropriately to An Elec
3. n arm s length from face at least 20 508mm Position keyboard close enough to create a 90 angle in elbow 220 508mm Angle Tilt screen to eliminate glare Tilt the keyboard back 10 so that your wrists remain flat To Reduce Fatigue Breathe Breathe deeply through your nose Blink Blink often to avoid dry eyes Break 2 to 3 minutes every 20 minutes 15 to 20 minutes every 2 hours For service and warranty visit www ergotron com For local customer care phone numbers visit http contact ergotron com f NOTE When contacting customer service reference the serial number Americas Sales and Corporate Headquarters EMEA Sales 1181 Trapp Rd Amersfoort The Netherlands Q o rgotron Inc St Paul MN USA 31 33 45 45 600 ERGOTRON All rights reserved 800 888 8458 www ergotron COM While Ergotron Inc makes every effort to provide accurate and complete information on the installation E E i and use of its products it will not be held liable for any editorial errors or omissions including those 1 651 681 7600 info eu ergotron com made in the process of translation from English to another language or for incidental special or WWW ergotron com consequential damages of any nature resulting from furnishing this instruction and performance of j equipment in connection with this instruction Ergotron Inc reserves the right to make changes in the salesQergotron com product design and or product doc
4. rms on one pole mounted with the Desk Clamp option is limited to 180 forward over front of desk clamp base NOTE Grommet Mount Installations The range of motion side to side for two Extensions Arms on one pole mounted with the Grommet Mount option is 360 888 45 175 W 01 rev F 12 14 4 s NOTE Leave enough slack in cable to allow full range of motion A Caution To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual Failure to follow these instructions may result in equipment damage or personal injury 888 45 175 W 01 rev F 12 14 9 12 Important You will need to adjust this product after installation is complete Make sure all your equipment is properly installed on the product before attempting adjustments This product should move smoothly and easily through the full range of motion and stay where you set it lf movements are too easy or difficult or if product does nat stay in desired positions follow the adjustment instructions to create smooth and easy movements Depending on your product and the adjustment it may take many turns to notice a difference Any time equipment is added or removed from this product resulting in a change in the weight of the mounted load you should repeat these adjustment steps to ensure safe and optimum operation Q 6 Lift Up and down Increase Lift Strength If the mounted weight is too heavy or
5. this product does not stay up when raised then you ll need to increase 0 Lift Strength Decrease Lift Strength If the mounted weight is too light or this product does not stay down when CAUTION DO NOT overtighten fasteners lowered then you ll need to decrease Overtightening may cause damage to your Lift Strength equipment 4mm Q b Tilt Forward and Backward 9 ds ans mA CAUTION DO NOT remove screw Removing Decrease Friction Increase Friction If this product moves too easily then you ll need to increase friction screw inay cause Gamage to equipimemm If this product is too difficult to move then you ll need to decrease friction 4mm 10 12 888 45 175 W 01 rev F 12 14 ig 2 5mm SC B i AT j O QU m Eton CAUTION DO NOT remove screw Removing Increase Friction screw may cause damage to equipment If this product moves too easily then you ll need to increase friction Decrease Friction A If this product is too difficult to move then you ll need to decrease friction Q d Rotate Portrait Landscape M3 x 6mm 888 45 175 W 01 rev F 12 14 11 12 Set Your Workstation to Work For YOU Learn more about ergonomic computer use at www computingcomfort org Height Position top of screen slightly below eye level Position keyboard at about elbow height with wrists flat gt Distance Position screen a
6. trical indicates an impending electrical hazard Safety Alerts should not use this product with ELECTRICAL which if not avoided may result in personal injury fire out adult supervision and or death Safety Important You will need to adjust this product after installation is complete Make sure all your equipment is properly installed on the product before attempting adjustments This product should move smoothly and easily through the full range of motion and stay where you set it If movements are too easy or difficult or if product does not stay in desired positions follow the adjustment instructions to create smooth and easy movements Depending on your product and the adjustment it may take many turns to notice a difference Any time equipment is added or removed from this product resulting in a change in the weight of the mounted load you should repeat these adjustment steps to ensure safe and optimum operation A Warning Because mounting surface materials can vary widely it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment Caution To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual Failure to follow these instructions may result in equipment damage or personal injury 2 12 888 45 175 W 01 rev F 12 14 Choose Mounting Method d 4mm A 4S EU 0 31 2 8 51 mm W
7. umentation without notification to its users For the most current product information or to know if this document is available in languages other than those herein please contact Ergotron No part of this publication may be reproduced stored in a retrieval system or APAC Sales Worldwide OEM Sales transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written consent of Ergotron Inc 1181 Trapp Road Eagan Minnesota 55121 USA Patents Pending and Patented U S amp Foreign Ergotron is a registered trademark of Ergotron Inc Tokyo Japan www ergotron com www ergotron com info cem ergotron com apaccustomerservice ergotron com 12 12 888 45 175 W 01 rev F 12 14
Download Pdf Manuals
Related Search