`Owner`s Manual`
Contents
1. c If the TV has been exposed to rain or water d If the TV does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the TV has been dropped or the cabinet has been damaged lf the TV exhibits a distinct change in performance A 32E700 3 Safety Instructions 15 Replacement Parts When replacement parts are required be sure that only an authorized service technician has used replacement parts specified by Apex Digital or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards and void any warranty 16 Safety Check Upon completion of any service or repairs to this TV ask the service technician to perform safety checks to determine whether the product is in proper operating condition 17 Wall Mounting The TV should be mounted to a wall only by a professional The TV may slide or fall causing serious injury to a child or adult and serious damage to the product Warranty shall be voided 18 Heat The TV should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat NOTE TO CABLE TV INSTALLER This reminder i2. On o Speaker Note When adjustments are completed you may select another menu by pressing the Menu buiton 32E7 00 23 Menu Adjustments Date amp Time Settings The Time menu includes adjustment of settings for your local time zone and daylight savings time The clock will adjust automatically after the initial Channel Auto Scan of available broadcast channels in your area How to Navigate Press the MENU button on the remote control Navigate using arrow lt P buttons to select Time e Press down V arrow button to highlight Sleep Timer then press the gt arrow button to select time to view before the television timer turns the set off 5 Min gt 10 Min gt 15 Min gt 30 Min gt 60 Min gt 90 Min gt 120Min gt 180 Min gt 240 Min gt OFF him Zon Pacific e Press down arrow button to highlight Time Zone then DaylightSavingTime ty press the gt arrow button to select between Eastern gt Central Miia ace 12 hour gt Mountain gt Pacific gt Alaska gt Hawaii gt Samoa gt Auto Clock On Newfoundland gt Atlantic e Press down arrow button to highlight Daylight Savings Time Navigate using the lt gt arrow buttons to turn this feature on or off Ane Select e Press down arrow button to highlight Time Format Navigate using the lt gt arrow buttons to turn this feature 12 hour or 24 hour e Press down arrow button to highlight Auto Clock Navigate using the lt gt arrow bu
3. Press the MENU button on the remote control Navigate using arrow lt gt buttons to select Lock Gain access to rating options by pressing the down Y arrow button to highlight Enter Password Enter your 4 digit code factory default code is O000 unless previously changed Then press the V A arrow buttons to highlight Canada Navigate using the lt gt buttons to highlight Canada English e Navigate using down V arrow button to highlight Canada English then press the lt P arrow button repeatedly to select your ratings preference Turn off Wil it Appropriate for all children ih aor Ii Appropriate for everyone 8 years old and up teen General Audience aces snd m Parental Guidance Canada English Appropriate for Children over 14 years old Mature Audience Only Canada French W Select amp Move Exit e Navigate using down arrow button to highlight Canada French then press the lt gt arrow button repeatedly to select your ratings preference j Off Turn off G General Audience 3 1 n 8 ans Appropriate for Children 8 years old and up I a a m a kA TU 13 ans Appropriate for Children 13 years old and up Picture Sotnd 3 jetip Lock 16 ans Appropriate for Children 16 years old and up Canada English 18 ans Mature Audience Only Canada French AO Select Move Exit Note When adjustments are completed you may select another menu by pressing the Menu button
4. 32E700 30 Menu Adjustments Channel Settings The Channel menu provides the setup changes of your television to receive broadcast channels store your favorite channels add or skip channels in memory and label or name channels How to Navigate Press the MENU button on the remote control Navigate using arrow lt gt buttons to select Channel Press the down button to highlight your preferences e Favorite e Highlight Favorite to add channels to your Favorites List Navigate using the lt gt V A arrow buttons to select channels to be added or deleted from your list Press ENTER to add or delete a channel A checkmark indicates a channel has been added You may also display your list of Favorite channels by pressing the FAV button on the remote control FIC Fi z ey fod R Channel Channel Label Favorite 46 1 50 0 Air Cable Auto Scan Favorite Channel list 50 1 Show Hide Channel Number Channel Label 50 3 OSRE Move Exit AO Select Press ENTER change Exit e Show Hide e Highlight Show Hide to select or skip channels already in memory Navigate using the lt gt V A arrow buttons to access the list of available channels Press ENTER to change the channels status A checkmark indicates a channel has been added ri er Air Cable Channel Channel Lael Auto Scan 7 0 Favorite 7 1 KABC DT Channel list 7 2 KABC SD Show Hide 7 3 KABC WN Channel Number 9 0 KCAL DT Channel Label AO Sel
5. Batu gt Surround sound gt e Bass AVL gt gt Press down WY arrow button to highlight Bass sae Press lt gt buttons to increase or decrease low frequency AQ Select Q Move intensity e Treble Press down arrow button to highlight Treble e Digital Audio Output Press lt P buttons to increase or decrease high frequency Press MENU to enter the main menu press P button intensity to select Sound Press AY button to select among Digital Audio Output Balance Eaa Press lt gt button to select Raw Off PCM Press down arrow button to highlight Treble Press lt P buttons to adjust sound towards the left or right Surround Sound speaker Press MENU to enter the main menu press gt button MTS to select Sound Press down arrow button to highlight MTS Press A W button to select Surround Sound Press lt gt button to select Mono gt Stereo gt SAP Press P gt button to select Off On Mono Sets the sound to mono Stereo Sets the sound to stereo when stereo is not available The sound is automatically switched AVL a to mono Press down arrow button to highlight AVL SAP Sets the sound to the second audio program Press lt gt button to select Off On e Audio Language Press down arrow button to highlight Audio Language Press lt gt button to select English gt Francais gt Espa ol Press down arrow button to highlight SPEAKER Press lt gt button to select Off
6. PAUSE USB PREVIOUS USB NEXT USB STOP USB REPEAT USB Press to display a list of channels saved in the TV tuner memory Press to review scheduled programming for the currently viewed channel Press to display a listing of your favorite TV channels Pause and still frame the current image on the display Press again for live TV 12 PICTURE Standard gt Dynamic gt Soft gt User gt Power Saving 10 FAV o x O J I m m J U 13 TEMP Select the Color Temperature COOL gt NORMAL gt WARM 14 V A 4P ARROWS ENTER Press the navigation buttons for moving through the menu options Press the ENTER button to select confirm 15 EXIT Press to exit a displayed menu 16 RETURN Press to return to the previous menu 17 SLEEP Press to activate the Sleep function The TV will automatically turn off after 5 gt 10 gt 15 gt 30 gt 60 gt 90 gt 120 gt 180 gt 240 gt minutes gt OFF Press to display the Main menu Pores Select the viewable display aspect options Normal Wide Zoom or Cinema 20 VOLUME Adjust the volume up or the volume down 21 LAST Press to switch between the current channel and previously viewed channel 22 MUTE Press to temporarily turn off the TV audio Press again to resume 23 CHANNEL VA Change the channel up or down Select desired TV channel directly For example to select digital channel 4 1 24 NUMBERS DASH press 4 press a
7. TEXT1 4 e Navigate using the 4 gt arrow buttons to select CC Off gt CC On gt CC on Mute CC Mode gt CC Mode CC Off Analog CC Ane Digital CC Option Service1 Service gt a Aa gt gt Digital CC Option AO Select Move Exit 0O Select Q Move Exit e Press down arrow button to highlight Option Press the arrow button to enter a menu with options to customize text fonts colors and opacities we fei CC Mode CC Off Analog CC CC1 Digital CC Service1 W Select Move Exit Note When adjustments are completed you may select another menu by pressing the Menu button 32E700 26 PC Menu Adjustments Advanced Settings In the Setup menu you may adjust the position of images displayed on screen once you connect an input signal from your PC The recommended resolution is 1366x768 For use with a laptop computer refer to your computer s user manual on instruction for proper display output If your PC system uses a standard signal mode the TV screen will adjust automatically Connect an optional 3 5mm audio cable for stereo sound How to Navigate After connecting to a PC press the INPUT button on the remote control Use the VA buttons to highlight the PC input and press ENTER Press the MENU button on the remote control and navigate using arrow lt P buttons to select Setup e Gain access to position adjustment options by pressing the down V arrow button to highlight PC Settings th
8. VGA VGA does not support cet digital audio MTS STEREO Audio Language English Digital Audio output Raw How To Setup Digital Output Surround sound Off AVL oji Select Move Exit e Press the MENU button on the remote control e Press the right gt arrow button to select Sound e Press the down V arrow button to highlight Digital Audio output e Press gt to select Raw or PCM Connecting to a Stereo Receiver Amplifier O TO Va had PrO AUDIO OUT 6 COAXIAL OUT a eo HDMI1 Optional cables not included Dolby Prologic Surround Receiver Digital set top box gaming console or DVD How to Use Video Press the appropriate INPUT button on the remote Use V A arrow buttons to highlight the input source to view and then press ENTER Surround Left Surround Right Speaker Speaker How to Use Audio Select the appropriate input from your audio equipment NOTE Refer to the User Manual from your home theater equipment for recommended audio settings 32E 700 18 TV Setup Initial Setup Wizard IMPORTANT NOTE If your TV is connected to a Cable or Satellite set top box DO NOT run the Channel Auto Scan in STEP 3 Initial Setup Wizard After connecting your TV antenna or cable wire turn the television ON The quick Setup Wizard will display on screen to help guide you through the 3 steps listed below NOTE the Setup Wizard only appears when turning on
9. Wall Mount Information This TV uses a 100x100 VESA mounting bracket attachment pattern Please take this information with you when purchasing a wall mount for this TV Before attaching this TV to a Wall Mount Bracket first remove the pedestal post by removing the screws that attach the post to the TV rear 32E700 6 Installing the Base Oo o Qo oo oo o o T 2 Place the TV face down on a soft cloth or cushion anne Position Base as shown lining up the holes in the base with the holes in the TV rear aan Insert 4 screws provided through the holes in the base into the holes in the TV rear and and tighten securely Do not over tighten 32E700 7 Remote Control Battery Install Your remote control handset is powered by two 2 AAA type batteries e Turn the remote over and remove Place two 2 AAA batteries into e Replace the cover battery cover the battery compartment with the and ends facing as indicated e Effective remote range is approximately 16 feet at an angle of no greater than 30 to the left right or 20 up down to the IR sensor e To avoid possible damage from
10. arrows to AV highlight HDMI Press ENTER component 32E 700 13 Connection to Component YPbPr Input Connecting a device with a Component connection Installation JOMITORO ON AUDIO OUT COAXIAL OUT a ee HDMI1 Optional Component cables not included Digital set top box gaming console or DVD How to Connect Input Source e Match and insert the green Y blue Pb and red Pr cables into the device and TV Next connect the red and white L amp R audio TV cables AV NOTE The picture will be black amp white if hooked up incorrectly You must hook up audio cables separately How to Use e Press the INPUT button on the TV remote Then use the VA arrow buttons to highlight Component Press ENTER 32E 700 14 Installation Connection to Composite Input Connecting a device with a Component connection R O VE haa PrO L YPbPr HDMI1 AUDIO OUT Q COAXIAL OUT Audio Video Cable included VIDEO E Digital settop box gaming console or DVD NOTE The yellow A V cable plugs into the green input labeled V Y on the back of the TV How to Connect e Match and insert the yellow red and white A V cables into the device and TV Input Source How to Use e Press the INPUT button on the remote Then use the YA arrow TV buttons to highlight AV Press ENTER component HDMI1 HDMI2 HDMIS PC Media 32E 700 15 Connection to Antenna amp Installa
11. battery chemical leakage remove the batteries if you do not plan to use the remote for an extended period of time Do not mix batteries of different age and or type Always discard used batteries safely ree 30 _ 30 00 e Do not expose the remote control to liquids direct sun light or sources of excessive heat i DELL i SECS e The IR receiver on the TV will not work properly if the set is in direct sunlight NOTE Improper use of batteries can result in a chemical leakage or explosion Cable Satellite Remote Control Codes NOTE The remote control from your Cable Satellite provider can be programmed to operate most of the major functions of this TV model which include POWER INPUT SOURCE VOLUME VOLUME CHANNEL CHANNEL SELECT OK ENTER based on your remote and NUMBER buttons For non major TV functions not listed use the remote control included with this TV TO program your Cable Satellite remote to operate this ETEC TV follow the programming instruc tions included with your providers remote and use the following codes Comcast or Direct TV 10030 AT amp T U verse 1043 Dish Network 506 RCA Universal 0030 32E 00 8 Remote Control Overview 20 24 26 32E 700 32E 700 9 Remote Control Overview Button Function 1 POWER Turn the display ON or OFF Standby 2 DISPLAY Provides program information for program being viewed PLAY
12. down arrow button to highlight CEC then press the arrow button to highlight CEC Control e Navigate using the 4 gt arrow buttons to select On gt Off When you select On the CEC functions open Otherwise the CEC functions close Menu Language English Transparent 25 OSD Timeout 30Sec Closed Caption Input Label Other Settings Restore Default Setup Wizard CEC OSRE VY BAAAAAA Ss Move Exit e Press down arrow button to highlight TV Auto Power On Navigate using the lt P arrow buttons to select On gt Off If this item is On when the TV is turned on the external device will turn to HDMI mode automatically during powering on CEC Control Device Auto Power Off TV Auto Power On Audio Receiver Connect Root Menu OSR E Q Move Exit e Press down arrow button to highlight Root Menu Press the gt ar row buttons to enter DVD menu CEC Control Device Auto Power Off TV Auto Power On Audio Receiver Connect Root Menu OSR Ei Move Exit CEC Control lt Device Auto Power Off lt TV Auto Power On lt Audio Receiver lt Connect Root Menu VV VV v4 OORT rat Move Exit e Press down arrow button to highlight Audio Receiver Press the lt gt arrow button to select On gt Off If this item is On users can control the volume of the external amplifier through adjusting the TV s volume CEC Control Device Auto Power Off TV Auto Pow
13. not expressly approved by the party responsible for compliance may void the user s authority to operate the equipment 32E700 4 Table of Contents poran en INS ICU OINS aaa E E EE EE E EE oes neae salem E E 1 TPE Or CONE ee E a een A A E E A A ee N eee 5 MOGUC E E E E E E 6 Installing the Base ater eins a eu a teen ooncael easepd nearest eames tlua eee gas cahlsate a sanded leave wn phir sedea tate advodioank satuanta ouitlee ou pee Seana poaetawenesetieaamng 7 Remote Control Baroy In a rset tae a iar EE it a E E E E E EE E E 8 EPN aE E EE S EE A espn tannins 9 TV Overview PrO ee aE IN E E E E E E a 11 Roar PANGI area brea nico a E E oats E e E E EE E EE EE E Saree E E E E E E E E A EE 12 Installation Connect a digital cable box satellite receiver or DVD player with an HDMI cable cccccecseeeeeeeeeeeeeeeeeeseeeeeeeaees 13 Connect a digital cable box satellite receiver or DVD player with a Component connection cccceseeeeeeeeeeeeeeeeees 14 Connect a digital cable box satellite receiver or DVD player with Composite cables yellow red amp white 15 Connecting the Power and Basic Cable connection ceceecccececeeeeeeeeeecaeeeeeeeeeessaeeeeeeeeesssueseeeeeessaaeaeeeeeeesaaaeseeeeeeaeas 16 Connection to a Personal Computer sieved cesncsecendienctectacs anceninconceaing adeagec seuwxeancasinadincceaedandudabanenss ciclenncanaceieaee aie aneedecaexeaeebie 17 Connection to a Home Theater Sy
14. on the TV s panel AV How to Connect Audio Sound component e Connect a 3 5mm audio cable not included from the computer s mini audio output jack to the audio input on the TV s panel HDMI1 How to Use HDMI2 e Press the INPUT button on the remote control Use the buttons VA to HDMI3 highlight PC Press ENTER NOTE If your PC uses a standard signal mode the screen will adjust automatically HONEI Bnd OAM Bs O AUDIO OUT 6 COAXIAL OUT Ss ee HDMI1 Audio Cable included How to Connect to an amplifier surround sound system e Match and insert the red and white audio cables from Line Out on the TV to Line In on your amplifier NOTE The TV s speakers will still output audio You can turn the Audio Amplifier TV s speaker volume to 0 to prevent echoing 32E 700 17 Connection to a Home Installation Theater System Connection to a Home Theater Audio System rO OAMI M O V AUDIO OUT Q COAXIAL OUT SSS a il ypa l Optional digital cable not included Connecting to a Home Theater System Digital audio can deliver optimal 2 channel stereo or 5 1 surround sound with F IN Q Five discrete full range channels plus a separate channel for a subwoofer ime Setup Lock Channel Sound Mode Connect an optional digital cable directly to the television s COAXIAL OUT ace audio output and listen through all inputs except
15. to ON Change Password System Lock Input Block Change Password System Lock Input Block US Rating Canada Rating PRT Setting Reset RRT US Canada PRT Setting Reset RRT VVVVVV 0O Select Move Exit AO Select Move Exit OORA a Move Exit e To set parental controls for television e Highlight TV then press the gt e Highlight MPAA then press the gt programming or DVD movies press arrow button to enter the TV Ratings arrow button repeatedly to select the VA arrow buttons to highlight menu and select your preference your movie rating preference US Rating TV Y Appropriate for all children G General Audience f TV Y7 Appropriate for all children over 7 PG Parental Guidance Suggested Navigate USING the lt P buttons to TV G General Audience PG 13 Parents Strongly Cautioned highlight TV MPAA menu TV PG Parental Guidance Suggested R Restricted TV 14 Parents Strongly Cautioned NC 17 No One Under 17 Permitted TV MA Mature Audience Only X Adults Only Off Not applicable AO Select Move Exit O Select Move Exit W Select Move Exit NOTE RRT Setting and Reset RRT are not user adjustable settings 32E7 00 29 Menu Adjustments Parental Control In the Lock menu you may block television and movie programming based on Canadian TV and movie rating guidelines To gain access and select your preferences within the Parental menu make certain your input is set to TV How to Navigate
16. will only fit into a grounded power outlet If you are unable to insert the plug into the outlet contact your electrician to replace the obsolete outlet Do not defeat the safety purpose of the grounding type plug 7 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them Pay particular attention to cords at plugs convenience receptacles and the point where they exit from the TV 8 Lightning To protect the TV during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the TV from lightning and power line surges 32E700 2 Safety Instructions 9 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the TV be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electri cal Code U S A ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of anten na discharge unit connection to grounding electrodes and requirements for the grounding electrode Example of Grounding According to National Electrical Code Instructions Groun
17. 32E 00 Ver 1 1 32 LED TELEVISION For technical support the ETEC Technical Support Center is available 9 00AM to 9 00PM Monday to Friday and 9 00AM to Noon Saturday for technical assistance or troubleshooting To contact us by phone please call 1 800 936 1168 Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus includ ing amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the ap paratus
18. When a cart is used use caution when moving the cart apparatus combination to avoid injury CONDOR WD Cc from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time D 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 WARNING To Reduce The Risk Of Fire Or Electric Shock Do Not Expose This Apparatus To Rain Or Moisture 16 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus 17 The mains plug or appliance coupler shall remain readily operable 18 Use in outdoors This TV is not designed for outdoors installation Do not expose the TV to rain as it may result in a fire or an electric shock Also do not expose the TV to direct sunlight as it may heat up and CAUTION become damaged RISK OF ELECTRIC SHOCK DO NOT OPEN Safety TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS ARE INSIDE REFER TO QUALIFIED SERVICE TECHNICIAN ONLY Dangerous Voltage The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to
19. aption Over Scan Input Label Other Settings Input Label Restore Default Other Settings Setup Wizard Restore Default CEC Setup Wizard If this item is On users can O Select 3 Move Exit control the volume of a compatible external amplifier through adjusting the TV s volume Menu Language English Transparent 25 OSD Timeout 30Sec Closed Caption Over Scan vVvvvvvvy vyvvvyvvv v 0O Select Q Move Exit NOTE Closed Caption and Advanced are features described on the following pages 32E700 25 Menu Adjustments Closed Captions The Setup menu includes adjustments for activating the Closed Caption text feature for display on screen and customiz ing CC display types and font styles How to Navigate Press the MENU button on the remote control Navigate using arrow lt P buttons to select Setup e Press the down arrow button to highlight Closed Caption then press the gt arrow button to highlight CC Mode Menu Language English Transparent 25 OSD Timeout 30Sec Over Scan Input Label Other Settings Restore Default Setup Wizard CEC Select AAA A ba Move Exit e Press down arrow button to highlight Digital CC Navigate using the 4 gt arrow buttons to select Off Service 1 6 tomege CC Mode Analog CC Option W Select O Move Exit e Press down arrow button to highlight Analog CC Navigate using the 4 P gt arrow buttons to select CC1 4
20. d Clamp 4 Antenna Lead in Wire Antenna Discharge Unit NEC Section 810 20 Grounding Conductor NEC Section 810 21 Electric Service Equipment Ground Clamps Power Service Grounding Electrode System NEC Art 250 Part H NEC National Electrical Code 10 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall on to power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 11 Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock 12 Object and Liquid Entry Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on or inside the TV 13 Servicing Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to a qualified service technician 14 Damage Requiring Service Unplug from the wall outlet and refer servicing to a qualified service technician under the following conditions a If the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product
21. d in shipping the unit for warranty repair Under no circumstances shall ETEC be liable for any loss direct indirect incidental foreseen unforeseen special or consequential or for any damage arising out of or in connection with the use of this product UNDER NO CIRCUMSTANCES WILL ETEC BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES This warranty does not cover re manufactured units or product sold As Is This warranty is valid only to the original purchaser of the Product in the United States and Canada and grants specific legal rights 32E700 36
22. e contrast brightness color sharpness and color temperature How to Navigate Press the MENU button on the remote control Navigate using lt gt arrow buttons to select Picture Press the down V arrow button to highlight Picture Mode then press the arrow button to select your viewing preference from 5 factory options Standard gt Dynamic gt Soft gt User gt Power Saving The Standard setting is recommended for most brightly lit viewing environments Depending on the ambient light level in the room you may find one of the other Picture settings more pleasing To make more critical adjustments based on your own preferences select the User mode e Brightness Press down arrow button to highlight Brightness Navigate JPF 4 cad using the lt gt arrow buttons to increase or decrease overall a a Gi brightness EREN sF tne setup costes e Contrast ee Press down arrow button to highlight Contrast Navigate using the lt P arrow buttons to increase or decrease contrast intensity e Color Press down arrow button to highlight Color Navigate using EER the lt P arrow buttons to increase or decrease color intensity Advanced Settings e Tint Press down arrow button to highlight Tint Navigate using the lt P arrow buttons to adjust colors toward green or reddish tint e Sharpness Press down arrow button to highlight Sharpness Navigate using the lt P arrow buttons to soften or view c
23. e eee eee 28 Parental COn OL ee ne eee ee ee A a ee E O ne ee nee eee ee 29 Channel Settings FO seer ss ote EE vcs EE EEEE ENEE E EEE EEE A E EEE eusere see 31 SNOW PE e E E T E E A E A E waa 31 eian UN A Ee EN E E EE S A syracuse sty E A AA E E V E S ETE ETE 31 ZOOM MOOGS irrar A E E E E A E E AEA E A S eee ee 32 USB MOGE oe EE E E AAEE E A E E 33 Specifications eec cect ec ete teet eee eee cent eeeeeeeeeeeeeeeneeeseeaeesaneeeseseeeseeeeneeeeeseneeneeeneseeeseeeesereassaneeneeeesseneonteoeesensoneeoneeeneenteaes 34 UR CUTTS SNC tig agro cea ness se csc EE een eine oe nase tae ose pease E EE E eng eens 35 32E700 5 Introduction What s In The Box Please refer to this guide whenever you have questions about features and functions This instruction book will get you up and running with the best possible connection type for your devices Enjoy D i INPUT MENU CH VoL The 32E700 package includes the following items Save the carton amp packing for future shipping e Remote Control AAA Batteries 2 e Quick Start Guide e User Manual e Child Safety e Audio Video Cable e Pedestal Base e Screws for Pedestal Base 4 e Remote Control e User manual e Audio Video Cable AAA Batteries x 2 e Quick Start Guide e Child Safety z gt e Pedestal Base e Audio out Cable e Screws for Pedestal Base 4
24. e volume up or down 32E7 700 11 TV Overview Rear Panel Wall Mounting NOTE You must remove the pedestal before wall mounting It is recommended that you consult a professional before mounting this TV a wall Use VESA 100 x 100 wall mount hardware eo O a L yPiPr oa O OUT R L ee 1 Audio Out Connect to audio receiver 2 EARPHONE Connect a stereo headphone 3 5mm not included for private listening 3 COAXIAL OUT Connect an optional coaxial digital cable not included through a compatible amp receiver to enjoy superior audio sound 4 AV Connect an external device to the composite VIDEO V and AUDIO L R out jacks found on most video equipment 5 Component Y Pb Pr Input Connect to an AV device that features component Y Pb Pr video and audio output Jacks 6 HDMI Connects to digital AV equipment that feature HDMI connectivity HDMI supports enhanced high definition video and up to 7 1 channel digital audio all from one cable Recommended for best performance HDMI cable not included Note HDMI 3 is ARC compatible 7 VGA Input Connect an optional VGA cable not included from your personal computer PC Audio Input 3 5mm 3 5mm audio cable not included for sound 8 CABLE ANTENNA Connect an antenna or cable connection for televisio
25. ect Move Exit AO Select Press ENTER change Exit e Channel Label Highlight Channel Label to name or rename a broadcast channel Navigate using the arrow button to enter the screen menu to re label a channel Use the A arrow buttons to spell out each letter number or character Use 4 P gt arrow buttons to advance to the next space T i Pcie sink lure s up Lace Air Cable Auto Scan Favorite Channel list Show Hide Channel Number Channel Label KABC SD AO Select Move Exit AO Select Move Exit 32E700 31 Aspect Modes The ASPECT function offers several viewing display options on the 16 9 screen Press the ASPECT button to cycle through the following widescreen settings NOTE The ASPECT function is not available for digital broadcasts Press ASPECT to cycle through i the following widescreen settings Se MENU Recommended for viewing native widescreen content and undistorted 4 3 images with black bars 2 WIDE Stretches certain 4 3 content and may reduce visible black bars Stretches the image both vertically and horizontally to fill the screen when a viewing widescreen content The Zoom effect will crop images somewhat Hii When viewing 4 3 content Cinema mode will fill the entire screen eliminating visible side black bars It may also eliminate or reduce black bars on certain widescreen movies 32E700 32 USB Modes 1 Press the INPUT button on the
26. en press arrow button to select from the following options Menu Language English Transparent 25 OSD Timeout 30Sec Closed Caption Over Scan Input Label Other Settings Restore Default 0 63 W Select Q Move Exit v y 4 7 ee ee e Highlight Clock Navigate using the 4 gt arrow buttons to control the width of the image AQ Select Move Exit e Highlight H Pos Navigate e Highlight V Pos Navigate using the lt P arrow buttons to using the lt gt arrow buttons to adjust the position of images adjust the position of images displayed from side to side displayed up and down eS ORs 2 AO Select CORE Exit Select Move Exit e Highlight Phase Navigate e Highlight Auto Press the gt using the 4 gt arrow buttons to arrow button to automatically adjust improve focus and image stability the display to the best setting 1 90 nE Re OOR Move Exit ODRE COORG Exit 32E700 27 Menu Adjustments CEC Settings The CEC menu includes options for controlling functions of compatible external devices connected via the HDMI input Please refer to the instruction manual of your connected device to confirm if CEC control is possible How to Navigate Press the MENU button on the remote control Navigate using arrow 4 gt buttons to select Setup e Press down arrow but ton to highlight Device Auto Power Off Navigate using the 4 gt arrow buttons to select On gt Off e Press the
27. er On Audio Receiver Connect Root Menu AO Select Move Exit If this item is On the external device will be turned off automatically when the TV is Aaii off CEC Control Device Auto Power Off lt TV Auto Power On lt Audio Receiver lt Connect Root Menu AO Select COO Move Exit e Press down V arrow button to highlight Connect Press the ar row button to connect TV and DVD Player CEC Control Device Auto Power Off TV Auto Power On Audio Receiver Connect Root Menu ODRA Move Exit Note When adjustments are completed you may select another menu by pressing the Menu button 32E700 28 Menu Adjustments Parental Control In the Lock menu you may block television and movie programming based on TV ratings and Motion Picture Association guidelines To gain access and select your preferences within the Parental menu make certain your input is set to TV How to Navigate Press the MENU button on the remote control Navigate using arrow lt P buttons to select Lock Gain access to parental rating options by pressing the down arrow button to highlight Enter Password Enter your 4 digit code factory default code is O000 unless previously changed e To change the password press e To make changes to parental gt arrow button to display a screen controls highlight System Lock to enter your new password then then press the 4 gt arrow button confirm again not illustrated
28. lt settings See page 27 Remote control does not function Replace batteries with new ones Check that battery polarity is correct Point remote directly at the TV s IR receiver See page 8 32E 00 35 LIMITED ONE YEAR TELEVISION WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a one year period from the original date of purchase from an authorized ETEC dealer We will repair or replace the unit free of charge should it become defective under this warranty providing you the Original purchaser submit proof of purchase sales slip along with the TV and all accessories During the one year period from the original purchase date we will service or exchange the TV at no charge To obtain warranty service or replacement within the duration of the one year warranty please return the product and all accessories to the original place of purchase For technical support the ETEC Technical Support Center is available Monday to Friday 9 00AM to 9 00PM EST and Saturday 9 00AM to Noon for technical assistance or troubleshooting at 1 800 936 1168 This warranty does not cover any product which has been subject to damage due to an act of nature misuse neglect accident abuse commercial use or modification of or to any part of the product including the antenna Damage to any external media such as DVD CD and or USB or other memory devices are not covered nor is the cost incurre
29. n e Perform Channel Scan to add channels into the TV tuner memory channels through the See page 29 antenna e Readjust your antenna and retry Auto Channel Scan e Signal from the TV station may be weak in your area No color e Check the video installation of your external A V equipment See pages 13 18 Video noise or choppy picture e Readjust antenna Keep TV away from noise sources neon lights and microwave appliances TV blocked on certain channels e Perform Channel Scan to add channels into the TV tuner memory See page 29 e Check whether the channel was deleted See page 29 e Check parental control settings See page 30 31 e Restore default settings See page 24 Cannot use certain functions e If the item chosen in a menu is shown in gray text that item cannot be selected in the current input No sound e Check that connected audio cables are completely inserted e Verify you have selected the correct audio source from your amplifier See page 22 e Mute function may be enabled press mute on the remote Black box on screen e The Text option is enabled and no text is available e Press the CCD button on the remote control to turn off No power e Batteries in the remote control may need replacing e Re attach AC plug to wall outlet No picture e Digital TV channel signal maybe weak try another channel e Press INPUT button to verify the desired input selected e Re connect the antenna or cable wiring e Restore defau
30. n reception Note Use an outdoor antenna cable or satellite for best reception 9 USB Input Port Connect to portable USB device such as USB flash hard drive max storage capacity 400GB Supports MP3 and J PEG 32E 700 12 Installation Connection to HDMI Input Digital Cable Satellite Set Top Box Optional HDMI cable not included i en BA DAN ed O OCO V V HDMI 1 HDMI2 STREAM HDMI3 ARC VGA PC AUDIO CABLE ANTENNA Cable Satellite set top box Coaxial RF Cable tincluded How to connect not included On the back of your device connect the HDMI cable from HDMI out on device to HDMI in on the panel How to Use e Press the INPUT button on the remote the use the VA arrows to highlight HDMI Press ENTER NOTE You can also connect a digital cable satellite box using an RF coaxial 75 ohm cable Most cable satellite systems require the TV to be set to Ch 3 or 4 to display a picture Blu ray HD DVD or Game Console VGA PC AUDIO CABLEIANTENNA USB HDMI3 ARC l HDMI2 STREAM XONI ORROM OMO V N Digital settop box gaming console or blu ray w HDMI interface Optional HDMI cable not included How to Connect On the back of your device connect the HDMI cable from HDMI out on Input Source device to HDMI in on the panel How to Use TV e Press the INPUT button on the remote then use the VA
31. nd press 1 4 1 25 INPUT Press to display all of the input Sources on screen 26 AUDIO Standard gt Music gt Movie gt Sports gt User 27 MTS Press to select a program s second audio channel if available 28 CCD Press to select closed caption subtitles if available Off gt On gt CC on mute 29 NUMBER KEYS Press number keys to enter channel numbers 32E 700 10 TV Overview Front amp Side Panel D INPUT MENU CH VOL IR Receiver o S 9 A soft blue light illuminates when the television power is on Input Source TV AV component HDMI1 HDMI2 HDMI3 PC Media 1 POWER Press the POWER button to turn the TV ON OFF standby The screen image will appear within a few seconds and the Blue LED will turn on 2 INPUT After connecting your DVD cable box etc select the appropriate input source to view Press the INPUT button to display the input options Press the CH CH buttons to highlight the input source and press the VOL button to select 3 MENU Press the MENU button to display Press VOL to select from the 6 menu options available Press the CH CH buttons to select a feature from the selected menu then press the VOL VOL buttons to adjust the volume settings 4 Channel CH Press the CH CH buttons to select a channel in the TV mode 5 Volume VOL Press the VOL VOL buttons to adjust th
32. nu e Press the MENU button e Using the lt gt arrow buttons scroll to highlight Channel e Press the down arrow buttons to highlight Air Cable Select Cable if you subscribe to a pay television service without a set top box e Press the lt P arrow buttons to highlight Cable e Press the V arrow button to highlight Auto Scan and press ENTER Press the gt arrow button to highlight YES and press ENTER to begin Auto Scan NOTE Channel Auto Scan may take several minutes to complete Cable Mode a E Analog ire fof Tee SX Are you sure to Auto Digital lt _ o scan RF CH Fewer 1 Channel List Ne Yes Total Fou nd F Show Hide Channel Number 5 2 Channel Label KSTP SD Select Air when TV is connected to an indoor outdoor antenna e Press the lt P arrow button to highlight Air e Press the V arrow button to highlight Auto Scan and press ENTER Press the gt arrow button to highlight YES and press ENTER to begin Auto Scan NOTE Channel Auto Scan may take several minutes to complete Air Mode Analog Digital Scan RECH No Yes Total Found Are you sure to Auto iak maem Lute Scan Pavords Channel List Show Hide Channel Number Channel Label T ee 32E700 21 Menu Adjustments Picture Setting The Picture menu offers options to enhance and refine the picture displayed on your TV based on ambient room light and personal preferences Adjustment options includ
33. remote control to display the Input menu Use the A Y buttons to select Media 2 Use the lt gt buttons to highlight an individual USB option Press the A V buttons to select Media in the INPUT SOURCE Source menu and then press the ENTER button to enter e Press the lt gt buttons to select Photo or Mu sic and then press the ENTER button to enter e Press the lt gt buttons to select the option you want to adjust in the main Media menu then press ENTER button e Press the 1 gt buttons to select Photo and then press the ENTER button e Press the lt gt to select the option you want to watch then press Enter button e Press the A V lt gt to select return option to retum to the previous menu e Press the lt gt buttons to select Music and then press the ENTER button e Press the 1 gt to select the option you want to hear then press Enter button e Press the A W to select return option to return to the previous menu Press the arrow buttons to select a play mode then press ENTER to select desired play mode Press MENU to return to the previous screen Press arrow buttons to hide the menu in the bottom 32E 00 33 Specifications Composite Video Y Pb Pr HDMI RF COAXIAL PC VGA PC Audio IN 3 5mm Input Connections Headphone Jack 3 5mm USB Audio Out L R 32E 00 34 Troubleshooting Symptom Possible Solutions Cannot receive certai
34. risper edges in the picture e Color Temperature Press down arrow button to highlight your Color Temperature preference Navigate using the 4 P ar row buttons to select Cool more bluish tone Normal or Warm setting e Advanced Settings Adjust advanced video features to fine tune the picture Press button to enter iv Select Note When adjustments are completed you may select another menu by pressing the Menu button 32E 00 22 Menu Adjustments Audio Settings The Audio menu offers options to make sound enhancements while listening through the built in speakers or to select digital audio options when connected to a Dolby Digital receiver though a SPDIF coaxial digital output How to Navigate Press the MENU button on the remote control Navigate using lt gt arrow buttons to select Sound Press the VW arrow button to highlight Sound Mode then press the arrow button to select your sound preference from 5 factory options Music gt Movie gt Sports gt User gt Standard e Sound Mode Press down arrow button to highlight Sound Mode Press lt gt button to select Music gt Movie gt Sports gt User gt Standard Music Preserves the original sound Good for musical programs Movie Enhances treble and bass for a rich sound experience Sports Enhances vocals for TV audio as Mod User Select to customize audio settings Treble Bal Standard Produces a balanced sound in all environments AAAS
35. s provided to call the CATV system installer s attention to Article 820 40 of the National Electric Code U S A The code provides guidelines for proper grounding and in particular specifies that the cable ground should be connected to the grounding system of the building as close to the point of the cable entry as practical FCC REGULATORY INFORMATION This television has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residen tial installation This television generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this television does cause interference to other electronic equipment which can be determined by turning the television off and on then the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and television Connect the equipment into an outlet on a circuit different from that to which the television is connected Consult your dealer or an experienced radio TV technician for assistance Any changes or modifications
36. stem cccccccccceccsesseeeeeeeesaeseeeeeeeseaeeeeeeeeeseeeeeueeeeseseeasceeeeeseaeaeeeeeeesseaeseeeeeeseaageeeseeeeas 18 TV Setup delke esa re E E E E E E A A EEEE A E eee E EE E EE E ee 19 TV Channel Setup amp Channel Auto SCan cecccccccccssssseeeceeeceeeeeeeeesaeeeeeeeesseeeueeeeeesseeeeeeeessseeeeeeeeessaeseeeeeesseageeeeneees 21 Picture Setting OS YU e ce rate catechins arto gh ae EN E E EEE 22 EG UNC SS aeaea E E A E E E E cada anubhimcns sont pomemintaceminnauuiituianmuteeses 22 06 EE E EE E A E ee E E E ES E E E E EE A ee ee E 22 TUN ENA P E A TE A cia es esac E E E eee eee at cui A A A A E 22 SET ON E E e A O ee eee ee ee EE eee 22 GOE TCN reer E E E E ee ee A E E ee eee 22 Audio Settings FS e E E EEE A E A E E ee Seen ne a EEE E E A E E E E E EE 23 MODIG te etc erin EE E E ect ete bets E E E E E E 23 BN EN a cic cee reese sate E EE E ene E esd Gpanseaueen nee eene O E E 23 Sare Ti e PTEE EEPE E E E D E E E AE IEE EEE TA E A E 23 SPDIF TYPO aee e E E E E E EEE E E E AE E E EE E 23 PUCIS L NOUE a a E E ee eee es eee E E ee ee eee E 23 Date r TIM SSNS cee esos a S netstat NES en ns teen N a e eD eia 24 Setup Settings Kont Longua CS aeee eE E EE E EE E E E E E E E E 25 PANDO ee a e E a E E A E E E E E E E EEE E E E E 25 AD HNE O e E A E E E E AE A 25 Closed Or ool 6 9 ee ee een EA eee ee a ee ee E a er eer eee 26 Advanced SemS renias AE es ee eee en ee eee ee eee ee 27 CEC SETIO Meee ee eee ee ee ee nee eee e
37. the TV for the first time How to Navigate the Setup Menus Use the A V arrow buttons on the remote to move to the menu selection Use the lt gt arrow buttons on the remote to choose the desired menu option STEP 1 Choosing a Menu Language Setup Wizard Use the AY arrow buttons to select Menu Language Go lo neal shep Use the lt gt arrow buttons to select English gt Francais gt Espanol Use the V arrow button to seletct Go to next step and press the gt button to complete the step STEP 2 Setting the Time Setup Wizard Use the AY arrow buttons to select Time Zone Daylight Saving Time and Time Format selections Daylight Saving Tene i oti Use the lt gt arrow buttons to select the desired setting ine Fatma i Pheu Go te heel elep Use the V arrow button to seletct Go to next step and press the lt i Mave ithe Ex gt button to complete the step 32E7 00 19 TV Setup Initial Setup Wizard STEP 3 Setting Air Cable and Channel Auto Scan Note Your type of television connection will determine if you should complete the Channel Auto Scan part of this step Use the lt P gt arrow buttons to select Air or Cable based on your type of connection Antenna or Cable without a set top box For Cable Satellite Connections WITH a set top box Press the MENU button on the remote control to exit the Setup Input Source Wizard ibs NOTE You will see the message PLEASE RUN AUTO SCAN Orca on
38. the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the users Instruction The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance 32E700 1 Safety Instructions Please read these instructions carefully This product complies with all applicable US federal safety requirements as well as those of the Canadian Standards Association 1 Cleaning Always unplug the TV before cleaning Do not use liquid or aerosol cleaners Use a soft slightly damp cloth to clean 2 Water and Moisture Do not use this TV near water Avoid using this TV in an excessively damp environment 3 Stand This TV should always be placed on a solid sturdy surface 4 Ventilation To prevent overheating do not block or obstruct the vent openings on the TV s back panel Also avoid placing this TV in a confined area with poor air flow 5 Power Sources This TV should be operated only from the type of power source indicated on the marking label If you are not sure of The type of power supply to your home consult your electronics retailer or local power company 6 Power Cord Polarization This TV is equipped with a three wire grounding type plug a plug with a third grounding pin As a safety feature this plug
39. the screen Ignore this message as this is not necessary HDMI1 when using a set top box HDMI2 HDMI3 Press the INPUT button on the remote control to display the PC Input Source screen illustrated to the left Media Use the AY arrow buttons to highlight the input where the set top box was installed Press ENTER to select the desired input Initial Setup is now complete You may now begin enjoying your TV or make further adjustments to the TV settings which are explained in the following pages of this manual Setup Wizard gE SEE a ae em i e a a T o aeee a a J Dolg For Antenna amp Cable Connections WITHOUT a set top box Use the V arrow button to seletct Go to next step and press the gt button to begin the Channel Auto Scan Aliw Seltt Channel Auto Scan may take several minutes to complete Once Channel Auto Scan has ended Initial Setup is complete You may now begin enjoying your TV or make further adjustments to the TV settings which are explained in the following pages of this manual Aly Select MENU Exit 32E700 20 TV Provider Setup TV Settings amp Channel Auto Scan To make changes your TV provider or re scan for available broadcast channels in your area select the Channel Menu Note For Cable or Satellite users with a set top box there is no need to run Channel Auto Scan Connect your cable satellite set top box to one of the available inputs on the TV for viewing To enter the Channel Me
40. tion Cable Satellite Box We recommend using a high quality roof top antenna digital cable or satellite box for the best display and performance Note Reception quality is determined by your location geographical terrain distance from the local broadcast transmitter and strength of antenna Connecting to POWER IN N P in 2 N o Neb a S gt Sa a e Connectthe power cord to a properly grounded AC outlet then to your TV Roof Antenna Cable Outlet Installation G SEDO HDMI2 STREAM HDMI3 ARC VGA PC AUDIO CABLE ANTENNA USB Connecting an antenna or basic cable eee Ant Cable e Connect the RF coaxial 75 ohm cable from Wall Outlet existing roof top indoor antenna or wall outlet e Finger tighten the Coaxial RF Cable end to the Cable Antenna input on the panel Coaxial RF Cable not included 32E 700 16 Installation Connection to a Personal Computer Connecting a PC or laptop OC O HDMI2 STREAM HDMI3 ARC VGA PC AUDIO CABLE ANTENNA USB VGA amp Audio Cable not included Recommended computer display resolution 1366x768 60Hz Input Source How to Connect a PC e Connect using a male to male VGA cable not included from your PC to TV the VGA
41. ttons to turn this feature on or off e Clock and Date are automatically set the first time the tuner receives a broadcast channel Note When adjustments are completed you may select another menu by pressing the Menu buiton 32E700 24 Menu Adjustments Setup Settings In the Setup menu you may change the initial set up of preferences that include settings for language menu display computer monitoring closed captions enhancement of black detail in the picture and resetting your TV back to its factory default status How to Navigate Press the MENU button on the remote control Navigate using arrow lt P buttons to select Setup Gain access to display options by pressing the down arrow button to highlight Menu Language or other options then press gt arrow button on your remote to select e Menu Languages e Transparent e OSD Time Out Other languages include English Navigate using the 4 gt arrow but Adjust the duration of the Fran ais Espanol tons to adjust the transparency of the OSD on screen display menu on screen display menu Press lt P button to select Menu Language English Transparent 25 OSD Timeout v 7 Menu Language English Transparent OSD Timeout 30Sec Closed Caption Over Scan Input Label Other Settings Restore Default Menu Language English Transparent lt 25 OSD Timeout 30Sec Closed Caption MME Closed Caption Over Scan Input Label Other Settings Restore Defa
42. ult Setup Wizard CEC 0O Select Move Exit Over Scan Input Label Other Settings Restore Default Setup Wizard Setup Wizard 6 e 6 0 0O Select Q Move Exit O Move Exit TI It VYVYVYYYY VYVVYVYY e Input Label e Other Settings e Restore Default Create labels for the devices Set the parameter of audio only no Press the gt arrow button to connected to your TV signal power off and no operation automatically reset all adjustments Press ENTER P button to enter power off back to their original factory settings Press ENTER gt button to enter Menu Language English Transparent 25 OSD Timeout 30Sec Closed Caption Menu Language English Transparent 25 OSD Timeout 30Sec Closed Caption Over Scan Over Scan Input Label Input Label Other Settings Other Settings Restore Default Restore Default Setup Wizard Setup Wizard CEC 6 0 ODE E Move Exit W Select Move Exit Menu Language English Transparent 25 OSD Timeout 30Sec Closed Caption Over Scan Input Label Other Settings Restore Default vyvvvy vvvvyvy vyv V Setup Wizard CEC Select O Move Exit vyv e CEC Settings e Setup Wizard Set the options for controlling other Set the first time installation CEC enabled external devices Press ENTER P button to enter connected to the HDMI inputs Refer to your device s manual for CEC options Menu Language English Transparent 25 OSD Timeout 30Sec Closed C
Download Pdf Manuals
Related Search