GS2110-WTBD，GS2107-WTBD GS21 General
Contents
1. GS Installer storage place The installer is stored in the following folder saved in the product disc CD ROM or DVD ROM of GT Works3 Version 1 104J or later CD ROM lt Root gt TOOL GS GS Installer exe DVD ROM lt Root gt Disk1 TOOL GS GS Installer exe 4 For installing GS Installer set to OFF the automatic playback function of the drive before inserting the product disc into the drive or finish the started installation if GT Works3 Installer was automatically started by the automatic playback function 2 2 Installation procedure GS installer InstallShield Wizard 1 Click GS Installer GS Installer exe in the folder shown in 2 1 3 above to start UekErhtoetthensad AaS taler GS Installer Operate the personal computer in accordance with instructions given on the screen When the completion screen shown on the left appears click the Finish button to quit GS Installer InstallShield Wizard Complete GS series has become available for GT Designer3 GOT 2000 2 2 3 Uninstallation procedure When GT Designer3 GOT2000 is uninstalled the GS Series is automatically uninstalled For uninstallation of GT Designer3 GOT2000 refer to GT Works3 Version1 Installation Procedure packed together with the product disc of GT Works3 Version 1 104J or later 2 4 Precautions GS Installer InstallShield Wizard When the following screen appears after startup of GS Installer operate the personal computer in accordance2. Remark Compliance with all relevant aspects of the eM standard Radiated Emissions EN61131 2 2007 Programmable controllers Equipment requirements and tests EMS Compliance with all relevant aspects of the standard ESD RF electromagnetic field EFTB Surge RF conducted disturbances and Power frequency magnetic field For more details please contact your local Mitsubishi Electric sales site For details of CE marking refer to the following GOT SIMPLE series User s Manual This manual confers no industrial property rights or any rights of any other kind nor does it confer any patent licenses Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual Warranty Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi opportunity loss or lost profits caused by faults in the Mitsubishi products damage secondary damage accident compensation caused by special factors unpredictable by Mitsubishi damages to products other than Mitsubishi products and to other duties e This product has been manufactured as a general purpose part for general industries and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life e Before using the product for special purposes such as nucl
3. controllers and the network devices to be ready for communication before they communicate with the GOT Failure to do so can cause a communication error on the GOT When the GOT is subject to shock or vibration or some colors appear on the screen of the GOT the screen of the GOT might flicker e Be sure to shut off all phases of the external power supply used by the system before mounting or removing the GOT main unit to from the panel Not doing so can cause the unit to fail or malfunction e Use the GOT in the environment that satisfies the general specifications described in this manual Not doing so can cause an electric shock fire malfunction or product damage or deterioration When mounting the GOT to the control panel tighten the mounting screws in the specified torque range 0 36N m to 0 48N m with a Phillips head screwdriver No 2 Undertightening can cause the GOT to drop short circuit or malfunction Overtightening can cause a drop short circuit or malfunction due to the damage of the screws or the GOT Remove the protective film of the GOT When the user continues using the GOT with the protective film the film may not be removed Operate and store the GOT in environments without direct sunlight high temperature dust humidity and vibrations Do not use the GOT in an environment with oil or chemicals Doing so may cause failure or malfunction due to the oil or chemical entering into the GOT e Be sure to shut off a
4. malfunction MOUNTING PRECAUTIONS CAUTION e Use the GOT in the environment that satisfies the general specifications described in this manual Not doing so can cause an electric shock fire malfunction or product damage or deterioration When mounting the GOT to the control panel tighten the mounting screws in the specified torque range 0 36N m to 0 48N m with a Phillips head screwdriver No 2 Undertightening can cause the GOT to drop short circuit or malfunction Overtightening can cause a drop short circuit or malfunction due to the damage of the screws or the GOT Remove the protective film of the GOT When the user continues using the GOT with the protective film the film may not be removed Operate and store the GOT in environments without direct sunlight high temperature dust humidity and vibrations Do not use the GOT in an environment with oil or chemicals Doing so may cause failure or malfunction due to the oil or chemical entering into the GOT e Be sure to shut off all phases of the external power supply used by the system before wiring Failure to do so may result in an electric shock product damage or malfunctions WIRING PRECAUTIONS CAUTION e Please make sure to ground FG terminal of the GOT power supply section by applying 1000 or less which is used exclusively for the GOT Not doing so may cause an electric shock or malfunction Correctly wire the GOT power supply section after confirming the rated v
5. unit or cable to be damaged or can cause a malfunction due to a cable connection fault Do not drop the module or subject it to strong shock A module damage may result Before touching the unit always touch grounded metals etc to discharge static electricity from human body etc Not doing so can cause the unit to fail or malfunction TOUCH PANEL PRECAUTIONS CAUTION e For the analog resistive film type touch panels normally the adjustment is not required However the difference between a touched position and the object position may occur as the period of use elapses When any difference between a touched position and the object position occurs execute the touch panel calibration When any difference between a touched position and the object position occurs other object may be activated This may cause an unexpected operation due to incorrect output or malfunction PRECAUTIONS WHEN THE DATA STORAGE Is INUsE_ WARNING e f the SD card mounted on drive A of the GOT is removed while the GOT is accessed processing for the GOT might be interrupted about for 20 seconds The GOT cannot be operated during this period The functions that run in the background including a screen updating alarm logging scripts and others are also interrupted Since this interruption makes an impact to the system operation it might cause failure After inhibiting access to the SD card on the GOT utility screen check that the SD card access LED is
6. B Products Peripherals fi T connection methods Pa Prou z ea ells Ton applicable to GOT2000 Works3 Version series and cable creation sold separately methods SH 081200ENG 1D7MK2 The manual in PDF format is included in the GT Works3 GT Designer3 products For details of a PLC to be connected refer to the PLC user s manual respectively Bundled Items Model Name Specifications 10 800 x 480 dots TFT color 65536 colors 24VDC Memory size 9MB Ethernet interface built in 7 800 x 480 dots TFT color 65536 colors 24VDC Memory size 9MB Ethernet interface built in GS 2110 WTBD GS2107 WTBD Bundled item Quantity Mounting fitting GS21 General Description This manual 1 Specifications 1 1 General Specifications Item Specifications Operating ambient temperature 0 to 50 C Storage ambient temperature 20 to 60 C 10 to 90 RH non condensing The wet bulb temperature is 39 C When the ambient temperature exceeds 40 C maintain the absolute humidity at 40 C and 90 Under intermittent 5 to 8 4Hz oe 3 5mm 10times each in X oe B4to160Hz 98m2 antz drectons Conforms to IEC 61131 2 147m s2 3times each in the X Y and Z directions Operating Storage ambient humidity Vibration resistance Conforms to IEC 61131 2 Shock resistance Must be free of lamp black corrosive gas flammable gas or excessive amount of electro conductive dust particles pperai
7. D card Supported memory card SDHC memory card SD memory card Application Project data upload download logging data save Buzzer output Single tone LONG SHORT OFF adjustable IP65F only the front part of the panel W272 10 71 x H214 8 43 x D56 2 21 mm inch Protective structure 3 External dimensions W206 8 11 x H155 6 11 x D50 1 97 mm inch Item GS 2110 WTBD W258 10 16 x H200 7 88 mm inch Horizontal format Approx 1 3kg Excluding mounting fixtures Approx 0 9kg Excluding mounting fixtures Panel cutting dimensions Weight Compatible software package Version of GT Designer3 Version1 104J or later Specifications GS2107 WTBD W191 7 52 x H137 5 40 mm inch Horizontal format 1 Bright dots always lit and dark dots unlit may appear on a liquid crystal display panel It is impossible to completely avoid this symptom as the liquid crystal display comprises of a great number of display elements Flickers and partial discoloration may be generated on the liquid crystal display panel due to individual differences of panels Please note that these phenomena appear due to its characteristic and are not caused by product defect 2 The touch panel is an analog resistive type Simultaneous pressing of two or more areas on the touch panel may activate the switch between those areas Do not press two or more areas simultaneously on the touch panel 3 Note that this does not guarantee all users oper
8. Graphic Operation Terminal Safety Precaution Read these precautions before using Before using this product please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly The precautions given in this manual are concerned with this product In this manual the safety precautions are ranked as WARNING and CAUTION Indicates that incorrect handling may cause hazardous N WARNING conditions resulting in death or severe injury Indicates that incorrect handling may cause hazardous CAUTION conditions resulting in medium or slight personal injury or physical damage Depending on circumstances procedures indicated by CAUTION may also be linked to serious results In any case it is important to follow the directions for usage DESIGN PRECAUTIONS WARNING Some failures of the GOT or cable may keep the outputs on or off Some failures of a touch panel may cause malfunction of the input objects such as a touch switch An external monitoring circuit should be provided to check for output signals which may lead to a serious accident Not doing so can cause an accident due to false output or malfunction Do not use the GOT as the warning device that may cause a serious accident An independent and redundant hardware or mechanical interlock is required to configure the device that displays and outputs serious warning Not doing so can cause an
9. JY997D518BDC Side B E A CHINESE B ENGLISH MITSUBISHI ELECTRIC GS2110 WTBD GS2107 WTBD GS21 General Description Manual Number JY997D518BDC GOT SIMPLE This manual describes the part names dimensions mounting and specifications of the product Before use read this manual and manuals of relevant products fully to acquire proficiency in handling and operating the product Make sure to learn all the product information safety information and precautions And store this manual in a safe place so that you can take it out and read it whenever necessary Always forward it to the end user Registration Ethernet is a trademark of Xerox Corporation in the United States The company name and the product name to be described in this manual are the registered trademarks or trademarks of each company Effective Dec 2013 Specifications are subject to change without notice 2013 Mitsubishi Electric Corporation Graphic Operation Terminal Safety Precaution Read these precautions before using Before using this product please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly The precautions given in this manual are concerned with this product In this manual the safety precautions are ranked as WARNING and CAUTION Indicates that incorrect handling may cause hazardous N WARNING conditions resulting in death or sever
10. above cables separately from such wiring and keep them a minimum of 100mm apart Not doing so noise can cause a malfunction Do not press the GOT display section with a pointed material as a pen or driver Doing so can result in a damage or failure of the display section When the GOT is connected to the Ethernet network the available IP address is restricted according to the system configuration When multiple GOTs are connected to the Ethernet network Do not set the IP address 192 168 3 18 for the GOTs and the controllers in the network When a single GOT is connected to the Ethernet network Do not set the IP address 192 168 3 18 for the controllers except the GOT in the network Doing so can cause the IP address duplication The duplication can negatively affect the communication of the device with the IP address 192 168 3 18 The operation at the IP address duplication depends on the devices and the system Turn on the controllers and the network devices to be ready for communication before they communicate with the GOT Failure to do so can cause a communication error on the GOT When the GOT is subject to shock or vibration or some colors appear on the screen of the GOT the screen of the GOT might flicker MOUNTING PRECAUTIONS WARNING e Be sure to shut off all phases of the external power supply used by the system before mounting or removing the GOT main unit to from the panel Not doing so can cause the unit to fail or
11. accident due to false output or malfunction When the GOT detects its backlight failure the GOT disables the input operation on the touch switch s Thus operators cannot operate the GOT with touches The GOT backlight failure can be checked with a system signal of the GOT Even when the display section has dimmed due to a failure of the liquid crystal section or the backlight on the GOT the input operation of the touch switches may still be enabled This may cause an incorrect operation of the touch switches For example if an operator assumes that the display section has dimmed because of the screen save function and touches the display section to cancel the screen save a touch switch may be activated h touches The GOT backlight failure can be checked with a system signal of the GOT The display section of the GOT is an analog resistive type touch panel Simultaneous pressing of two or more areas on the display section may activate the switch between those areas Do not press two or more areas simultaneously on the display section Doing so may cause an accident due to incorrect output or malfunction When programs or parameters of the controller such as a PLC that is monitored by the GOT are changed be sure to shut off the power of the GOT promptly and power on the GOT again Not doing so can cause an accident due to false output or malfunction If a communication fault including cable disconnection occurs during monitoring on th
12. al format W154 6 06 x H85 9 3 38 mm inch Horizontal format Display character 16 dot standard font 50 characters 30 lines Horizontal format Display color 65536 colors Brightness 32 level adjustment Backlight LED type no replacement required Backlight off screen saving time can be set Minimum 22 aois Per Touch l panel 2 ae i touched Simultaneous 2 point presses prohibited Only one point can be touched 1 million times operating force 0 98N max Flash memory Internal QMbytes for storing project data OS Memory C drive f f Life Number of write times 100 000times RS 422 1ch Transmission speed 115200 57600 38400 19200 9600 4800bps RS 422 Connector shape D sub 9 pins Female Application For communicating with controllers Terminating resistor 3300 fixed RS 232 ich Transmission speed 115200 57600 38400 19200 9600 4800bps RS 232 Connector shape D sub 9 pins Male Application For communication with controllers and a bar code reader Built in For PC connection Project data upload download FA transparent function interface Data Transfer method 100BASE TX 10BASE T 1ch Ethernet Connector shape RJ 45 modular jack Application For communication with controllers For PC connection Project data upload download FA transparent function USB Full Speed 12Mbps 1ch USB Connector shape Mini B Application For PC connection Project data upload download FA transparent function Conforms to the SD standard 1ch S
13. ation environment In addition the product may not be used in environments under exposition of oil or chemicals for a long period of time or in environments filled with oil mist 1 3 Power Supply Specifications Item GS2110 WTBD 24VDC 10 15 ripple voltage 200mV or less 7 6W 317mA 24V or less 6 5W 271mA 24V or less Input power supply voltage Power consumption Specifications GS2107 WTBD At backlight off 3 8W 158mA 24V or less 3 8W 158mA 24V or less Inrush current Permissible instantaneous power failure time Within 5ms Noise immunity Dielectric withstand voltage Insulation resistance 2 GT Works3 Version1 compatible with GS Series Installation Procedure This chapter explains how to install and uninstall GT Works3 Version1 compatible with the GS Series Make sure to read this chapter before introducing GT Works3 Version1 compatible with the GS Series into the personal computer 2 1 Before installation 1 Prepare the product disc CD ROM or DVD ROM of GT Works3 Version 1 104J or later at hand 2 Install GT Designer3 GOT2000 Version 1 104J or later in advance For using the GS Series in the data transfer tool it is necessary to install in advance the data transfer tool Version 3 02C or later For installation of GT Designer3 GOT2000 data transfer tool refer to GT Works3 Version1 Installation Procedure packed together with the product disc of GT Works3 Version 1 104J or later 3
14. ct When these loose manuals are required please consult with our local distributor Contents Manual Number Model Code BCN P5999 0066 Manual name GT Works3 Installation Installation Instruction Instructions ee S ons Describes the Handy GOT hardware relevant content such as part names external dimensions mounting power supply wiring specifications and introduction to option devices GOT SIMPLE series User s Manual sold separately JY997D52901 Describes methods of the GT Designer3 basic operation for drawing GT Designer3 GOT2000 Help Sipe cence and specifications and settings of the object functions used in GT Designer3 Describes system Manual Mitsubishi Products for connection methods GT Works3 Version1 applicable to GOT2000 sold separately series and cable creation methods SH 081197ENG 1D7MJ8 Describes system configurations of connection methods applicable to GOT2000 series and cable creation methods GOT2000 Series Connection Manual Non Mitsubishi Products 1 for GT Works3 Version1 sold separately SH 081198ENG 1D7MJ9 Describes system configurations of connection methods applicable to GOT2000 series and cable creation methods GOT2000 Series Connection Manual Non Mitsubishi Products 2 for GT Works3 Version1 sold separately SH 081199ENG 1D7MK1 GOT2000 Series Connection Describes system Manual Microcomputer MOD configurations of
15. e The InstallShield Wiz Click Finish to exit t GS series has become available for GT Designer3 GOT 2000 2 2 3 Uninstallation procedure When GT Designer3 GOT2000 is uninstalled the GS Series is automatically uninstalled For uninstallation of GT Designer3 GOT2000 refer to GT Works3 Version1 Installation Procedure packed together with the product disc of GT Works3 Version 1 104J or later 2 4 Precautions GS Installer InstallShield Wizard x When the following screen appears after startup of GS Installer operate the personal computer in accordance with instructions given on the screen FR To use GS series please execute GS Installer after selectively installing ID the software shown below Version 1 104J or later of GT Designer3 GOT2000 Version 3 02C or later of DataTransfer 3 Notification of CE marking The following products have shown compliance through direct testing to the identified standards and design analysis forming a technical construction file to the European Directive for Electromagnetic Compatibility 2004 108 EC when used as directed by the appropriate documentation Specifications GS2107 WTBD 158mA 24V or less Conforms to IEC61000 4 4 2kV power supply line 350VAC for 1 minute across power supply terminals and earth 500VDC across power terminals and earth 10 MO or more by an insulation resistance tester This product is designed for use in industrial a
16. e GOT communication between the GOT and PLC CPU is suspended and the GOT becomes inoperative A system where the GOT is used should be configured to perform any significant operation to the system by using the switches of a device other than the GOT on the assumption that a GOT communication fault will occur Not doing so can cause an accident due to false output or malfunction DESIGN PRECAUTIONS CAUTION e Do not bundle the control and communication cables with main circuit power or other wiring Run the above cables separately from such wiring and keep them a minimum of 100mm apart Not doing so noise can cause a malfunction Do not press the GOT display section with a pointed material as a pen or driver Doing so can result in a damage or failure of the display section When the GOT is connected to the Ethernet network the available IP address is restricted according to the system configuration When multiple GOTs are connected to the Ethernet network Do not set the IP address 192 168 3 18 for the GOTs and the controllers in the network When a single GOT is connected to the Ethernet network Do not set the IP address 192 168 3 18 for the controllers except the GOT in the network Doing so can cause the IP address duplication The duplication can negatively affect the communication of the device with the IP address 192 168 3 18 The operation at the IP address duplication depends on the devices and the system Turn on the
17. e GS Series into the personal computer 2 1 Before installation 1 Prepare the product disc CD ROM or DVD ROM of GT Works3 Version 1 104J or later at hand 2 Install GT Designer3 GOT2000 Version 1 104J or later in advance For using the GS Series in the data transfer tool it is necessary to install in advance the data transfer tool Version 3 02C or later For installation of GT Designer3 GOT2000 data transfer tool refer to GT Works3 Version1 Installation Procedure packed together with the product disc of GT Works3 Version 1 104J or later 3 GS Installer storage place The installer is stored in the following folder saved in the product disc CD ROM or DVD ROM of GT Works3 Version 1 104J or later CD ROM lt Root gt TOOL GS GS Installer exe DVD ROM lt Root gt Disk1 TOOL GS GS Installer exe 4 For installing GS Installer set to OFF the automatic playback function of the drive before inserting the product disc into the drive or finish the started installation if GT Works3 Installer was automatically started by the automatic playback function 2 2 Installation procedure GS Installer InstallShield Wizard 1 Click GS Installer GS Installer exe in the folder shown in 2 1 3 above to start E GS Installer Operate the personal computer in accordance with instructions given on the screen When the completion screen shown on the left appears click the Finish button to quit GS Installer InstallShield Wizard Complet
18. e injury Indicates that incorrect handling may cause hazardous CAUTION conditions resulting in medium or slight personal injury or physical damage Depending on circumstances procedures indicated by CAUTION may also be linked to serious results In any case it is important to follow the directions for usage DESIGN PRECAUTIONS WARNING Some failures of the GOT or cable may keep the outputs on or off Some failures of a touch panel may cause malfunction of the input objects such as a touch switch An external monitoring circuit should be provided to check for output signals which may lead to a serious accident Not doing so can cause an accident due to false output or malfunction Do not use the GOT as the warning device that may cause a serious accident An independent and redundant hardware or mechanical interlock is required to configure the device that displays and outputs serious warning Not doing so can cause an accident due to false output or malfunction When the GOT detects its backlight failure the GOT disables the input operation on the touch switch s Thus operators cannot operate the GOT with touches The GOT backlight failure can be checked with a system signal of the GOT Even when the display section has dimmed due to a failure of the liquid crystal section or the backlight on the GOT the input operation of the touch switches may still be enabled This may cause an incorrect operation of the touch switches For
19. ear power electric power aerospace medicine or passenger movement vehicles consult with Mitsubishi Electric e This product has been manufactured under strict quality control However when installing the product where major accidents or losses could occur if the product fails install appropriate backup or failsafe functions in the system MITSUBISHI ELECTRIC AUTOMATION MANUFACTURING CHANGSHU CO LTD No 3 Southeast Road Changshu New amp Hi tech Industrial Development Zone of Jiangsu 215500 China JY997D518BDC Side B E A CHINESE B ENGLISH MITSUBISHI ELECTRIC GS2110 WTBD GS2107 WTBD GS21 General Description Manual Number JY997D518BDC GOT SIMPLE This manual describes the part names dimensions mounting and specifications of the product Before use read this manual and manuals of relevant products fully to acquire proficiency in handling and operating the product Make sure to learn all the product information safety information and precautions And store this manual in a safe place so that you can take it out and read it whenever necessary Always forward it to the end user Registration Ethernet is a trademark of Xerox Corporation in the United States The company name and the product name to be described in this manual are the registered trademarks or trademarks of each company Effective Dec 2013 Specifications are subject to change without notice 2013 Mitsubishi Electric Corporation
20. eld liable for damage caused by factors found not to be the cause of Mitsubishi opportunity loss or lost profits caused by faults in the Mitsubishi products damage secondary damage accident compensation caused by special factors unpredictable by Mitsubishi damages to products other than Mitsubishi products and to other duties e This product has been manufactured as a general purpose part for general industries and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life e Before using the product for special purposes such as nuclear power electric power aerospace medicine or passenger movement vehicles consult with Mitsubishi Electric e This product has been manufactured under strict quality control However when installing the product where major accidents or losses could occur if the product fails install appropriate backup or failsafe functions in the system MITSUBISHI ELECTRIC AUTOMATION MANUFACTURING CHANGSHU CO LTD No 3 Southeast Road Changshu New amp Hi tech Industrial Development Zone of Jiangsu 215500 China
21. example if an operator assumes that the display section has dimmed because of the screen save function and touches the display section to cancel the screen save a touch switch may be activated h touches The GOT backlight failure can be checked with a system signal of the GOT The display section of the GOT is an analog resistive type touch panel Simultaneous pressing of two or more areas on the display section may activate the switch between those areas Do not press two or more areas simultaneously on the display section Doing so may cause an accident due to incorrect output or malfunction When programs or parameters of the controller such as a PLC that is monitored by the GOT are changed be sure to shut off the power of the GOT promptly and power on the GOT again Not doing so can cause an accident due to false output or malfunction If a communication fault including cable disconnection occurs during monitoring on the GOT communication between the GOT and PLC CPU is suspended and the GOT becomes inoperative A system where the GOT is used should be configured to perform any significant operation to the system by using the switches of a device other than the GOT on the assumption that a GOT communication fault will occur Not doing so can cause an accident due to false output or malfunction DESIGN PRECAUTIONS CAUTION e Do not bundle the control and communication cables with main circuit power or other wiring Run the
22. g wooden packaging from insects they cause malfunction when entering our products Please take necessary precautions to ensure that remaining materials from fumigant do not enter our products or treat packaging with methods other than fumigation heat method Additionally disinfect and protect wood from insects before packing products Associated Manuals The following manuals are relevant to this product When these loose manuals are required please consult with our local distributor Manual Number BCN P5999 0066 Manual name GT Works3 Installation i Installation Instruction Instructions stallatio structions Describes the Handy GOT hardware relevant content such as part names external dimensions mounting power supply wiring specifications and introduction to option devices GOT SIMPLE series User s Manual sold separately JY997D52901 Describes methods of the GT Designer3 basic operation for drawing GT Designer3 GOT2000 Heip Casing data to GOT specifications and settings of the object functions used in GT Designer3 Describes system GOT2000 Series Connection configurations of Manual Mitsubishi Products for connection methods GT Works3 Version1 1 applicable to GOT2000 sold separately series and cable creation methods SH 081197ENG 1D7MJ8 Describes system configurations of connection methods applicable to GOT2000 series and cable creation methods GOT2000 Series Connec
23. hgamespnene Must be no direct sunlight Same as for saving Operating altitude 2000m 6562ft max Overvoltage category 2 II or less Pollution degree s 2 or less Cooling method Self cooling Grounding Class D grounding 100Q or less To be connected to the panel when grounding is not possible 1 Do not use or store the GOT under pressures higher than the atmospheric pressure of altitude Om Oft Failure to observe this instruction may cause a malfunction When the air inside the control panel is purged by pressurization the surface sheet may be lifted by high pressure As a result the touch panel may be difficult to press and the sheet may be peeled off 2 This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within the premises Category II applies to equipment for which electrical power is supplied from fixed facilities The surge voltage withstand level for up to the raged voltage of 300V is 2500V 3 This index indicates the degree to which conductive pollution is generated in the environment where the equipment is used In pollution degree 2 only non conductive pollution occurs but temporary conductivity may be produced due to condensation 1 2 Performance Specifications Specifications GS2110 WTBD Item GS2107 WTBD TFT color liquid crystal display Ta Display size W222 8 74 x H132 5 5 22 mm inch Horizont
24. k resistance Operating atmosphere Operating altitude 2000m 6562ft max Overvoltage category 2 II or less Pollution degree s 2 or less Cooling method Self cooling Grounding Specifications 10 to 90 RH non condensing The wet bulb temperature is 39 C When the ambient temperature exceeds 40 C maintain the absolute humidity at 40 C and 90 Under intermittent 5 to 8 4Hz PL 35mm 10times each in X Y and Z directions 8 4 to 150Hz 9 8m s2 Under continuous _Sto84H2 1mm Conforms to IEC 61131 2 147m s2 3times each in the X Y and Z directions Must be free of lamp black corrosive gas flammable gas or excessive amount of electro conductive dust particles Must be no direct sunlight Same as for saving Class D grounding 100Q or less To be connected to the panel when grounding is not possible 1 Do not use or store the GOT under pressures higher than the atmospheric pressure of altitude Om Oft Failure to observe this instruction may cause a malfunction When the air inside the control panel is purged by pressurization the surface sheet may be lifted by high pressure As a result the touch panel may be difficult to press and the sheet may be peeled off 2 This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within the premises Category II applies to equipment for which electrical po
25. ll phases of the external power supply used by the system before wiring Failure to do so may result in an electric shock product damage or malfunctions e Please make sure to ground FG terminal of the GOT power supply section by applying 1000 or less which is used exclusively for the GOT Not doing so may cause an electric shock or malfunction Correctly wire the GOT power supply section after confirming the rated voltage and terminal arrangement of the product Not doing so can cause a fire or failure Tighten the terminal screws of the GOT power supply section in the specified torque range 0 5Nem to 0 6Nem Undertightening can cause a short circuit or malfunction Overtightening can cause a short circuit or malfunction due to the damage of the screws or the GOT Exercise care to avoid foreign matter such as chips and wire offcuts entering the GOT Not doing so can cause a fire failure or malfunction Plug the communication cable into the GOT interface or the connector of the connected unit and tighten the mounting screws and the terminal screws in the specified torque range Undertightening can cause a short circuit or malfunction Overtightening can cause a short circuit or malfunction dueto the damage of the screws or unit TEST OPERATION PRECAUTIONS WARNING e Before performing the test operations of the user creation monitor screen such as turning ON or OFF bit device changing the word device current value changing the se
26. off and remove the SD card PRECAUTIONS WHEN THE DATA STORAGE Is INUsE CAUTION e Ifthe data storage mounted on the GOT is removed while the GOT is accessed the data storage and files are damaged To remove the data storage from the GOT check that the access to the data storage in SD card access LED the system signal and others is not performed When removing the SD card from the GOT make sure to support the SD card by hand as it may pop out Failure to do so may cause the SD card to drop from the GOT resulting in a failure or break Before removing the USB device from the GOT follow the procedure for removal on the utility screen of the GOT After the successful completion dialog is displayed remove the USB device by hand carefully Failure to do so may cause the USB device to drop from the GOT resulting in a failure or break DISPOSAL PRECAUTIONS CAUTION e When disposing of this product treat it as industrial waste TRANSPORTATION PRECAUTIONS CAUTION e Make sure to transport the GOT main unit and or relevant unit s in the manner they will not be exposed to the impact exceeding the impact resistance described in the general specifications of this manual as they are precision devices Failure to do so may cause the unit to fail Check if the unit operates correctly after transportation When fumigants that contain halogen materials such as fluorine chlorine bromine and iodine are used for disinfecting and protectin
27. oltage and terminal arrangement of the product Not doing so can cause a fire or failure Tighten the terminal screws of the GOT power supply section in the specified torque range 0 5Nem to 0 6Nem Undertightening can cause a short circuit or malfunction Overtightening can cause a short circuit or malfunction due to the damage of the screws or the GOT Exercise care to avoid foreign matter such as chips and wire offcuts entering the GOT Not doing so can cause a fire failure or malfunction Plug the communication cable into the GOT interface or the connector of the connected unit and tighten the mounting screws and the terminal screws in the specified torque range Undertightening can cause a short circuit or malfunction Overtightening can cause a short circuit or malfunction dueto the damage of the screws or unit TEST OPERATION PRECAUTIONS WARNING e Before performing the test operations of the user creation monitor screen such as turning ON or OFF bit device changing the word device current value changing the settings or current values of the timer or counter and changing the buffer memory current value read through the manual carefully and make yourself familiar with the operation method During test operation never change the data of the devices which are used to perform significant operation for the system False output or malfunction can cause an accident STARTUP MAINTENANCE PRECAUTIONS WARNING e When po
28. ort the SD card by hand as it may pop out Failure to do so may cause the SD card to drop from the GOT resulting in a failure or break Before removing the USB device from the GOT follow the procedure for removal on the utility screen of the GOT After the successful completion dialog is displayed remove the USB device by hand carefully Failure to do so may cause the USB device to drop from the GOT resulting in a failure or break DISPOSAL PRECAUTIONS CAUTION e When disposing of this product treat it as industrial waste TRANSPORTATION PRECAUTIONS CAUTION e Make sure to transport the GOT main unit and or relevant unit s in the manner they will not be exposed to the impact exceeding the impact resistance described in the general specifications of this manual as they are precision devices Failure to do so may cause the unit to fail Check if the unit operates correctly after transportation When fumigants that contain halogen materials such as fluorine chlorine bromine and iodine are used for disinfecting and protecting wooden packaging from insects they cause malfunction when entering our products Please take necessary precautions to ensure that remaining materials from fumigant do not enter our products or treat packaging with methods other than fumigation heat method Additionally disinfect and protect wood from insects before packing products Associated Manuals The following manuals are relevant to this produ
29. pplications e Manufactured by MITSUBISHI ELECTRIC AUTOMATION MANUFACTURING CHANGSHU CO LTD No 3 Southeast Road Changshu New amp Hi tech Industrial Development Zone of Jiangsu 215500 China e Manufactured at MITSUBISHI ELECTRIC AUTOMATION MANUFACTURING CHANGSHU CO LTD No 3 Southeast Road Changshu New amp Hi tech Industrial Development Zone of Jiangsu 215500 China e Authorized Representative in the European Community Mitsubishi Electric Europe B V Gothaer Str 8 40880 Ratingen Germany Type Graphic Operation Terminal Models GOT SIMPLE series Standard Remark Compliance with all relevant aspects of the EMI standard Radiated Emissions EN61131 2 2007 Programmable controllers Equipment requirements and tests EMS Compliance with all relevant aspects of the standard ESD RF electromagnetic field EFTB Surge RF conducted disturbances and Power frequency magnetic field For more details please contact your local Mitsubishi Electric sales site For details of CE marking refer to the following GOT SIMPLE series User s Manual This manual confers no industrial property rights or any rights of any other kind nor does it confer any patent licenses Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual Warranty Mitsubishi will not be h
30. rystal display comprises of a great number of display elements Flickers and partial discoloration may be generated on the liquid crystal display panel due to individual differences of panels Please note that these phenomena appear due to its characteristic and are not caused by product defect 2 The touch panel is an analog resistive type Simultaneous pressing of two or more areas on the touch panel may activate the switch between those areas Do not press two or more areas simultaneously on the touch panel 3 Note that this does not guarantee all users operation environment In addition the product may not be used in environments under exposition of oil or chemicals for a long period of time or in environments filled with oil mist 1 3 Power Supply Specifications Item GS2110 WTBD 24VDC 10 15 ripple voltage 200mV or less 7 6W 317mA 24V or less 6 5W 271mA 24V or less At backlight off 3 8W 158mA 24V or less 3 8W 17A or less 6ms 25 C at the maximum load Input power supply voltage Power consumption Inrush current Permissible instantaneous power failure time Within 5ms Noise immunity Dielectric withstand voltage Insulation resistance 2 GT Works3 Version1 compatible with GS Series Installation Procedure This chapter explains how to install and uninstall GT Works3 Version1 compatible with the GS Series Make sure to read this chapter before introducing GT Works3 Version1 compatible with th
31. tion Manual Non Mitsubishi Products 1 for GT Works3 Version1 sold separately SH 081198ENG 1D7MJ9 Describes system configurations of connection methods applicable to GOT2000 series and cable creation methods GOT2000 Series Connection Manual Non Mitsubishi Products 2 for GT Works3 Version1 sold separately SH 081199ENG 1D7MK1 GOT2000 Series Connection Describes system Manual Microcomputer MOD configurations of BUS Products Peripherals for GT connection methods PERUR z ea arale ter applicable to GOT2000 Works3 Version1 series and cable creation sold separately methods SH 081200ENG 1D7MK2 The manual in PDF format is included in the GT Works3 GT Designer3 products For details of a PLC to be connected refer to the PLC user s manual respectively Bundled Items Model Name Specifications 10 800 x 480 dots TFT color 65536 colors 24VDC Memory size 9MB Ethernet interface built in 7 800 x 480 dots TFT color 65536 colors 24VDC Memory size 9MB Ethernet interface built in GS 2110 WTBD GS2107 WTBD Bundled item Quantity Mounting fitting GS21 General Description This manual 1 Specifications 1 1 General Specifications Item Operating ambient temperature 0 to 50 C Storage ambient temperature 20 to 60 C Operating Storage ambient humidity Conforms to vibration Vibration resistance IEC 61131 2 vibration Shoc
32. trollers Terminating resistor 330Q fixed RS 232 1ch Transmission speed 115200 57600 38400 19200 9600 4800bps RS 232 Connector shape D sub 9 pins Male Application For communication with controllers and a bar code reader Built in interface Data Transfer method 100BASE TX 10BASE T 1ch Ethernet Connector shape RJ 45 modular jack Application For communication with controllers USB Full Speed 12Mbps 1ch USB Connector shape Mini B Application For PC connection Project data upload download FA transparent function Conforms to the SD standard 1ch SD card Supported memory card SDHC memory card SD memory card Application Project data upload download logging data save Buzzer output Protective structure 3 External dimensions Single tone LONG SHORT OFF adjustable IP65F only the front part of the panel W272 10 71 x H214 8 43 x D56 2 21 mm inch W206 8 11 x H155 6 11 x D50 1 97 mm inch Item GS 2110 WTBD W258 10 16 x H200 7 88 mm inch Horizontal format Approx 1 3kg Excluding mounting fixtures Panel cutting dimensions Weight Compatible software package Version of GT Designer3 Version1 104J or later Specifications GS2107 WTBD W191 7 52 x H137 5 40 mm inch Horizontal format Approx 0 9kg Excluding mounting fixtures Bright dots always lit and dark dots unlit may appear on a liquid crystal display panel It is impossible to completely avoid this symptom as the liquid c
33. ttings or current values of the timer or counter and changing the buffer memory current value read through the manual carefully and make yourself familiar with the operation method During test operation never change the data of the devices which are used to perform significant operation for the system False output or malfunction can cause an accident STARTUP MAINTENANCE PRECAUTIONS WARNING e When power is on do not touch the terminals Doing so can cause an electric shock or malfunction e Before starting cleaning or terminal screw retightening always switch off the power externally in all phases Not doing so can cause the unit to fail or malfunction Undertightening can cause a short circuit or malfunction Overtightening can cause a short circuit or malfunction due to the damage of the screws or unit STARTUP MAINTENANCE PRECAUTIONS CAUTION e Do not disassemble or modify the unit Doing so can cause a failure malfunction injury or fire e Do not touch the conductive and electronic parts of the unit directly Doing so can cause a unit malfunction or failure The cables connected to the unit must be run in ducts or clamped Not doing so can cause the unit or cable to be damaged due to the dangling motion or accidental pulling of the cables or can cause a malfunction due to a cable connection fault When unplugging the cable connected to the unit do not hold and pull from the cable portion Doing so can cause the
34. type touch panels normally the adjustment is not required However the difference between a touched position and the object position may occur as the period of use elapses When any difference between a touched position and the object position occurs execute the touch panel calibration When any difference between a touched position and the object position occurs other object may be activated This may cause an unexpected operation due to incorrect output or malfunction PRECAUTIONS WHEN THE DATA STORAGE Is INUsE_ WARNING e f the SD card mounted on drive A of the GOT is removed while the GOT is accessed processing for the GOT might be interrupted about for 20 seconds The GOT cannot be operated during this period The functions that run in the background including a screen updating alarm logging scripts and others are also interrupted Since this interruption makes an impact to the system operation it might cause failure After inhibiting access to the SD card on the GOT utility screen check that the SD card access LED is off and remove the SD card PRECAUTIONS WHEN THE DATA STORAGE IS IN USE CAUTION e Ifthe data storage mounted on the GOT is removed while the GOT is accessed the data storage and files are damaged To remove the data storage from the GOT check that the access to the data storage in SD card access LED the system signal and others is not performed When removing the SD card from the GOT make sure to supp
35. wer is on do not touch the terminals Doing so can cause an electric shock or malfunction e Before starting cleaning or terminal screw retightening always switch off the power externally in all phases Not doing so can cause the unit to fail or malfunction Undertightening can cause a short circuit or malfunction Overtightening can cause a short circuit or malfunction due to the damage of the screws or unit STARTUP MAINTENANCE PRECAUTIONS CAUTION e Do not disassemble or modify the unit Doing so can cause a failure malfunction injury or fire e Do not touch the conductive and electronic parts of the unit directly Doing so can cause a unit malfunction or failure The cables connected to the unit must be run in ducts or clamped Not doing so can cause the unit or cable to be damaged due to the dangling motion or accidental pulling of the cables or can cause a malfunction due to a cable connection fault When unplugging the cable connected to the unit do not hold and pull from the cable portion Doing so can cause the unit or cable to be damaged or can cause a malfunction due to a cable connection fault Do not drop the module or subject it to strong shock A module damage may result Before touching the unit always touch grounded metals etc to discharge static electricity from human body etc Not doing so can cause the unit to fail or malfunction TOUCH PANEL PRECAUTIONS CAUTION e For the analog resistive film
36. wer is supplied from fixed facilities The surge voltage withstand level for up to the raged voltage of 300V is 2500V 3 This index indicates the degree to which conductive pollution is generated in the environment where the equipment is used In pollution degree 2 only non conductive pollution occurs but temporary conductivity may be produced due to condensation 1 2 Performance Specifications Item GS2110 WTBD Specifications GS2107 WTBD W154 6 06 x H85 9 3 38 mm inch Horizontal format For PC connection Project data upload download FA transparent function For PC connection Project data upload download FA transparent function TFT color liquid crystal display ee Display size W222 8 74 x H132 5 5 22 mm inch Horizontal format Display character 16 dot standard font 50 characters 30 lines Horizontal format Display color 65536 colors Brightness 32 level adjustment Backlight LED type no replacement required Backlight off screen saving time can be set roun Kose Minimum 22a parkey ouc panel el ee fouch ed Simultaneous 2 point presses prohibited Only one point can be touched 1 million times operating force 0 98N max Flash memory Internal 9Mbytes for storing project data OS Memory C drive f Life Number of write times 100 000times RS 422 1ch Transmission speed 115200 57600 38400 19200 9600 4800bps RS 422 Connector shape D sub 9 pins Female Application For communicating with con
37. with instructions given on the screen To use GS series please execute GS Installer after selectively installing ID the software shown below Version 1 104J or later of GT Designer3 GOT2000 Version 3 02C or later of DataTransfer 3 Notification of CE marking The following products have shown compliance through direct testing to the identified standards and design analysis forming a technical construction file to the European Directive for Electromagnetic Compatibility 2004 108 EC when used as directed by the appropriate documentation 17A or less 6ms 25 C at the maximum load Conforms to IEC61000 4 4 2kV power supply line 350VAC for 1 minute across power supply terminals and earth 500VDC across power terminals and earth 10 MO or more by an insulation resistance tester This product is designed for use in industrial applications e Manufactured by MITSUBISHI ELECTRIC AUTOMATION MANUFACTURING CHANGSHU CO LTD No 3 Southeast Road Changshu New amp Hi tech Industrial Development Zone of Jiangsu 215500 China e Manufactured at MITSUBISHI ELECTRIC AUTOMATION MANUFACTURING CHANGSHU CO LTD No 3 Southeast Road Changshu New amp Hi tech Industrial Development Zone of Jiangsu 215500 China e Authorized Representative in the European Community Mitsubishi Electric Europe B V Gothaer Str 8 40880 Ratingen Germany Type Graphic Operation Terminal Models GOT SIMPLE series Standard
Download Pdf Manuals
Related Search