User Manual
Contents
1. HD TVI 1080P Dome Camera User Manual Thank you for purchasing our product If there are any questions or requests please do not hesitate to contact the dealer This manual may contain several technical incorrect places or printing errors andthe content is subject to change without notice The updates will be added to the new version of this manual We will readily improve or update the products or procedures described in the manual DISCLAIMER STATEMENT Underwriters Laboratories Inc UL has not tested the performance or reliability of the security or signaling aspects of this product UL has only tested for fire shock or casualty hazards as outlined in Ul s Standard s for Safety UL60950 1 UL Certification does not cover the performance or reliability of the security or signaling aspects of this product UL MAKES NO REPRESENTATIONS WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT Regulatory Information FCC Information FCC compliance This equipment has been tested and found to comply with the limits fora digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in acco2. Italian Spanish Polish etc are selectable 3 3SETUP 3 3 1 SCENE You can select indoor outdoor indoor 1 and low light as the working environments 3 3 2 LENS The camera is equipped with a fixed lens 3 3 3 EXPOSURE SHUTTER AUTO 1 25 1 50 FLK 1 200 1 400 1 1k 1 2k 1 5k 1 10k 1 50k x2 x4 x6 x8 x10 and x15 are selectable AGC You can set the AGC value from Oto 15 SENS UP You can set the SENS UP to OFF or AUTO BRIGHTNESS You can set the brightness value from 1to 100 DEFOG You can set the defog function as ON to enable the function Position size and the defog gradation are configurable EXPOSURE HSBLC 1 SHUTTER AUTO 1 SELECT AREA 1 2 AGC OFF 2 DISPLAY ON 3 SENS UP oe ae ae is UNE 2 aed ea 5 BLACK MASK ON eee oe 6 DEFAULT 6 BACKLIGHT OFF RR ae 7 RETURN RET Figure 3 2 Exposure PEUTER RABLE 3 3 4 Backlight Backlight Compensation BLC GAIN Set the gain of BLC as High Middle or Low AREA Press the up down left right button to define the BLC position and size Select RET or AGAIN to go back the BLC menu or re define the BLC area Default Restore the BLC settings to the default HSBLC Select an HSBLC area Set the DISPLAY status as ON Press the up down left right button to define the area position and size Set the HSBLC LEVEL from O to 100 Select ALL DAY or Night for the HSBLC mode Set the BLACK MASK status as ON or OFF 3 3 5 White
3. Set the DISPLAY status as ON or OFF Press the up down left right button to define the position and size of the area Set the SENSITIVITY from 0 to 60 Set the MOTION VIEW status as ON or OFF Privacy Select a PRIVACY area Set the DISPLAY status as INV MOSAIC COLOR or OFF Press the up down left right button to define the position and size of the area Defect LIVE DPC STATIC DPC and Black DPC are adjustable in this section Version You can check the software version of the device PRIVACY ADJUST 1 SELECT AREA 1 2 DISPLAY MOSAIC 1 SHARPNESS 15 3 COLOR 10 2 MONITOR LCD 4 TRANS 1 3 LSC OFF 5 DEFAULT a 4 VIDEO OUT PAL 6 RETURN RET 5 RETURN RET Figure 3 8 Privacy Mask Figure 3 9 Adjust 3 3 9 ADJUST Sharpness Adjust the sharpness from 0 to 15 Monitor Monitor CRT and Monitor LCD are selectable LSC Set the LSC status as ON or OFF 3 3 10 RESET Reset all the settings to the default 3 3 11 EXIT Press OK to exit the menu
4. 2 6 Fix the Camera to the Mount 6 Repeat steps 6 8 of the Ceiling Mounting section to complete the installation 2 3 In ceiling Mounting with Gang Box x EE Only the type 1 camera supports in ceiling mounting with gang box 1 Repeat steps 2 4 of the In ceiling Mounting section to secure the in ceiling mount supplied to the gang box RX ORSINI CD eee ee 0505050505050 c0ct 1 1 Figure 2 7 Install the Mount 2 Route and connect the corresponding cables 3 Align the camera with the gang box and tighten the screws to secure the camera with the gang box Figure 2 8 Fix the Camera to the Gang Box 4 Repeat steps 6 8 of the Ceiling Mounting section to complete the installation 3 Menu Operation Menu scene Lens Exposure Backen q we PavannicHT C NR Peciar apusr RESET INDOOR MANUAL SHUTTER C BLC DC ATW conor 2DNR Cie Guareness exit urDOoR C AGC asec awe ser C B W 30 NR D EFFEcT monrror INDOOR SENS UP INDOOR EXT MOTION LSC eiT erianTness urDOoR PRIVACY Peros VERSION T Figure 3 1 Main Menu fnot You can call the menu and adjust the camera parameters with a coaxial camera controller purchase separately You can also call the menu with supported TVI DVR 3 1 VIDEO OUT PAL or NTSC is selectable 3 2 LANGUAGE English Japanese CHN1 CHN2 Korean German French
5. Balance WB INDOOR OUTDOOR MANUAL ATW Auto tracking White Balance AWCSET are selectable 3 3 6 Day amp Night Color B W and EXT are selectable for DAY and NIGHT switches 3 3 7 NR 2D NR You can set 2D NR status as ON or OFF 3D NR Set the Smart NR status as ON and adjust the 3D smart NR sensitivity ranges from 0 to 100 Set the 3D NR LEVEL ranges from 0 to 100 Set the START AGC level as the threshold to enable AGC and set the END AGC level as the threshold to disable AGC re 2D amp 3D NR 1 SMART NR ON 2 LEVEL 80 1 2DNR OFF 3 START AGC 10 2 3DNR ON 4 END AGC 10 3 RETURN RET 5 RETURN RET Figure 3 4 NR Figure 3 5 3D NR 3 3 8 SPECIAL Camera Title Edit the camera title on this section D effect FREEZE Set the freeze function as ON or OFF MIRROR OFF MIRROR V FLIP and ROTATE are selectable for mirror D ZOOM Define the zoom area by configuring the position from PAN amp TILT SMART D ZOOM The D Zoom area sensitivity and time are configurable NEG IMAGE Set the NEG IMAGE as ON or OFF SPECIAL aaa 1 CAMTITLE ON4 2 D DFFECT 1 SELECT AREA 1 3 MOTION OFF 2 DISPLAY oON 4 PRIVACY OFF 3 SENSITIVITY 30 5 LANGUAGE ENG 4 MOTION VIEW ON amp DEFECI a 5 DEFAULT 7 VERSION 130722 6 RETURN RET 8 RETURN RET Figure 3 6 Special Figure 3 7 Motion Detection Motion Select a MOTION area
6. back box of type 1 camera base plate of type2 camera to the ceiling and secure them with supplied self tapping screws 4 Route the cables through the cable hole 5 Align the camera with the back box base plate and tighten the set screws to secure the camera with the back box base plate Type Il Figure 2 3 Fix the Camera to the Ceiling 6 Connect the corresponding cables 7 Adjust the camera according to the figure below to get an optimum angle 8 Fit the black liner on the camera and tighten the screws on the bubble of type 1 camera or rotate the bubble of type 2 camera to complete o 0 90 T Direction 0 355 f d s P Direction R Direction p Direction Oo R Direction 0 355 3564 Figure 2 4 Zoom and Focus Adjustment 2 2 In ceiling Mounting from You need to purchase an in ceiling mount separately if you adopt in celling mounting Steps 1 Drill the screw holes and the cable hole inthe ceiling according to the supplied drill template 2 Screw the bolts through the mount by aligning with the 2 bolt holes Fit the toggles onto the bolts 3 Push the two toggle bolts through the two screw holes on the ceiling Rotate the bolt till the toggle holds the ceiling tightly TAREE RES Figure 2 5 Install the Mount 4 Route and connect the corresponding cables 5 Fix the camera to the in ceiling mount with the supplied screws Figure
7. bol which may include lettering to indicate cadmium Cd lead Pb or mercury Hg For proper recycling return the battery to your supplier or to a designated collection point For more information see www recyclethis info 1 Introduction 1 1 Product Features This camera adopts new generation sensor with high sensitivity and advanced circuit board design technology It possesses the features of high resolution low distortion and low noise etc It is extremely suitable for supervisory system and image processing system The main features are as follows High performance CMOS sensor and high resolution bring high quality image Low illumination Support IR cut filter with auto switch OSD menu parameters are configurable Support auto white balance auto gain control electronic shutter control and internal synchronization SMART IR mode Unit transmission control Advanced 3 axis design meets different installation requirements 1 2 Overview 1 2 1 Overview of Type Dome Camera Lens Power Cable lt HD Video Cable LOR CVBS Cable Black Liner A TEN SSS Dip Switch 5 KS ME B ENA af J Auxiliary Video Output Back Box Bubble Figure 1 1 Overview of Type I Dome Camera 1 2 2 Overview of Type Dome Camera Power Cable Black Liner Lens L_cvps Cable Bubble Auxiliary Video Output Figure 1 2 Overview of Type II Dome Camera 2 Installation Before you start Pleas
8. e make sure that the device in the package is in good condition and all the assembly parts are included Make sure that all the related equipment is power off during the installation Check the specification of the products for the installation environment eCheck whether the power supply is matched with your power output to avoid damage Please make sure the wall is strong enough to withstand three times the weight of the camera and the mounting elf the wall is the cement wall you need to insert expansion screws before you install the camera If the wall is the wooden wall you can use self tapping screw to secure the camera lf the product does not function properly please contact your dealer or the nearest service center Do not disassemble the camera for repair or maintenance by yourself 2 1 Ceiling Mounting Steps 1 Drill the screw holes and the cable hole on the ceiling according to the supplied drill template Type I Type Il Drill Template Screw hole 3 for Hold A for cables mounting base routed through the wal C2 1 1 20 9 Drill Template A Hole A for cables routed through the celling Screw hole 2 for Mounting Base 2 1 2 Figure 2 1 The Drill Template 2 Loosen the screws on the bubble of type 1 camera rotate the bubble of type2 camera to remove the bubble and the black liner Type I Type II Figure 2 2 Remove the Bubble 3 Attach the
9. rdance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense FCC Conditions This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation EU Conformity Statement This product and if applicable the if supplied accessories too are marked 3 with CE and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006 95 EC the EMC Directive 2004 108 EC the RoHS Directive 2011 65 EU 2012 19 EU WEEE directive Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European DE Union For proper recycling return this product to your local supplier upon the purchase of equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info 2006 66 EC battery directive This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union See the product documentation for specific battery information The battery is marked with this sym
Download Pdf Manuals
Related Search