User`s Guide
Contents
1. Please read the following License Agreement You must accept the terms of this agreement before continuing with the installation StreetCam A LIMITED WARRANTY 1 Limited Warranty Manufacturer warrants that the products sold hereunder will be free from defects in material and workmanship for a period of 30 days from the date of Purchase If the Products do not conform to this Limited Warranty during the warranty period and herein above specified buyer shall notify manufacturer of the claimed defects and demonstrate to manufacturer satisfaction that the said defects are covered by this Warranty If the defects are properly reported to manufacturer within the warranty OI accept the agreement do not accept the agreement Figure 1 miguie lt 5 Click Finish when program installation completes StreetCam Viewer opens Figure 2 Setting the Time and Date To adjust the Time and Date with the StreetCam Viewer open 1 Insert the SD memory card into the memory card reader and plug memory card reader into your computer s USB port NOTE Use the included memory card reader to ensure compatibility NOTE The SDHC memory card slides smoothly all the way into the memory card reader The SDHC memory card goes in one way only Do not force the card in 3 Click OK on the log in window prompt The default login is admin The default password is left b a n k R Setup Default Settings E System Event2. Watermark and click OK Watermark Prool Execute the watermark Proof Program to view your file It is located in Folder C Program Files StreetCam Then click open and find your saved file see page 23 wmproof Watermark Proof Summary File Name C Documents and SettingsistartiMy Documents My Pictures CH2 2009061 File Name C Documents and Settings startiMy Documents My Pictures CH2 20090613 S 540 x 480 image Size 640 x 480 Image Colors 24bks Image Colors 24bits Watermark prooved Original wstermarked image Watermark not prooved Modified ce not watermarked image A Watermarked image that has NOT A Watermarked image that HAS been been tampered with shows a large green tampered with shows a large red X on circle on the image the image 32 Video AVI or JDF You can convert your video files to AVI format By default the videos are en crypted with a proprietary compression that is NOT playable alone To have your video files play as a stand alone file you must compress the files using Viewer For other video players that are not StreetCam viewer 1 You can only select one event at a time Click the video you wish to backup from the Event browser 2 Click Back up to open the backup screen 3 Select AVI and click OK The Backup Data Settings window opens 4 Select the channel you wish to back up under Select Channel Inside Cam or Outside Cam 5 Select the
3. User Settings Removable Disk Version g l a Camera Setting t The Set d i 4 Click setup The Setup window opens nade Cam Outside Cam Normal 15 v Normal 15 v AAA m Event 20 v Event 20 v Quality High v Ouality High v Audio Disk Usage Using O once Recycle Time Zone GMT 00 00 Greenwich Mean Time Dublin Edinburgh Lisbon London v Automatically adjust clock for daylight saving changes Auto Reboot Km Miles AM 03 00 Okm miles StreetCam will reboot every day for the stablity of operation Load File Default 5 In the Systems tab under Standard time zone select your time zone and daylight savings settings Click OK The Save As window appears 6 Locate the SD memory card reader directory Click Save NOTE Make sure that you save the JDF file onto your SD memory card and NOT onto your PC hard drive ie C All StreetCam Settings must save onto the SD mem ory card for settings to take effect 7 Eject memory card and insert it into the StreetCam Your StreetCam automatically synchro nizes the date with the satellite once powered on 9 Product Key Ts Recording ICO C 1 NN E Specifications GPS SENSOR___ __ tn records ator sudden acne _ Driver view 120 and In car view 175 Wide angle DC 12V 24V enable Car Battery OPERATING TEMPERATURE 0 50 C maintain temperature 25 85 C HUMIDITY 10 95 WEIGHT 150g DIMENSION W x D x H 65 W x 140 D x 30 H mm 11
4. 638 allocation units available on disk 29 Setup Version This window gives you all of the unit specific information for your StreetCam In the event of a warranty claim or questions about your specific StreetCam product you will need this infor mation Also please refer to this panel in the event of a new software release or update to be certain you have the most up to date version Setup Default Settings System Event User Settings Removable Disk version Version KERNEL Unknown RAMDISK Unknown SUN VERO Unknown Hi VER Unknown VIEWER 2 1 5 2009 06 19 30 Print pag This button enables you to print out pictures of video data When this button is clicked the moving video stops and a picture of the on screen view can be printed out Selection Printing CH 1 In car view image Select Channel Channel 1 Channel 2 CH 2 Driver view image Select the printer connected with PC and click Print to print out Select Printer amp Add Printer D KS Microsoft XPS Document Writer i Print to file Watermarks BMP Watermark To ensure video images have not been tampered with StreetCam Viewer comes bundled with a watermarking software called Watermark Proofer The watermark function allows you to take an image of a single frame screen shot and verify that the screen shot has not been tampered with To create a Watermark Under Select Image click BMP
5. for your area Please set the time zone be fore recording The time zone is not set before recording 5 Auto Reboot If you connect StreetCam to the battery of the car for continuous operation we recommend you to select the auto reboot feature to preserve stable operation 6 Km Miles choose Kilometers or Miles on viewer 25 Setup Event Setup Default Settings System Event User Settings Removable Disk Version Event Frame Pre Alarm 2 Second EMERGENCY a Post Alarm 20 Second SPEEDING SPEEDING SUDDEN STOP Speed SUDDEN START Impact Sensitive 10 9 1 Event Check the settings accordingly by types of events such as emergency impact over speed sudden brakes or sudden acceleration 2 Frame Pre alarm 2 6 seconds recording before event occurs Post alarm 10 30 seconds recording after event occurs 3 Speeding Sets the over speed limit Once the set speed limit has been exceeded the de vice will begin recording Km or Miles are shown according to preferences 4 Impact Configures G Sensor sensitivity 5 Load file Saves the configuration settings onto your PC 6 Default Restores factory default settings 26 Setup User Settings Setup Default Settings System Event User Settings Removable Disk version Car Info Car Info Driver Info Serial Info User Info User ID admin Password Car Info 1 Vechicle information 2 Driver inform
6. necessary Make sure to remove the secure film on the camera lens Wipe and clean the camera lens with a soft fabric For the best result clean the camera lens on a regular basis If you still encounter problems please contact your distributor or retailer Please contact your distributor or retailer Please format the SD memory card Check for internet connection Please contact your distributor or retailer Check the OS version lt must be installed with administrator privileges on VISTA Only SD memory card class 6 type is supported Verity there was not a sudden loss of power to the unit as this will affect data Check if the card reader supports SDHC type Configure the local date and time before starting StreetCam 00
7. the event as Emergency when viewing the file in the StreetCam viewer When you press the emergency button e The video automatically pre records and post records a set duration that you can config ure e The video is tagged as an Emergency event that you can later search and categorize the video using the included StreetCam Viewer The video records at maximum resolution 30 FPS 15 Recording with StreetCam The StreetCam records continuously once it receives power Before recording familiarize yourself with how the StreetCam records events The StreetCam comes with a built in video out port You can hook up a portable monitor not included to view what the StreetCam re cords in real time This ensures that you have the best possible recording angle To connect your portable display to the StreetCam 1 Connect the mini jack from the video cable into the MONITOR port on the side of the unit 2 Connect the yellow RCA video cable into the portable display not included The video then displays on the monitor figure 2 3 Adjust camera angles as needed To change camera views Press the CH button on the side of the unit to change between channel 1 and channel 2 This switches camera views between the in car camera and the Driver View camera Fig 2 How the STREETCAM Interprets Bumps and Impacts When your vehicle goes over a bump or receives a sudden force the built in sensor causes the REC LED on
8. Basic Installation 1 Insert the SD memory card a Open the SD memory slot cover b Insert the SD memory card into the slot with the sticker face up and upright Push memory card firmly until you hear a click Memory card locks in place c Close SD memory slot cover NOTE The SD memory card should slide smoothly into the memory slot The SDHC memory card is designed to go in one way only Do not force in the card 2 Install the mounting bracket a Stick the double sided adhesive onto the base of the mount ing bracket b Plug the mini jack connector from the mounting bracket into the side of the StreetCam labeled GPS c Slide mounting bracket upwards on the back of the device The mounting bracket locks in place d Connect the car adapter to the StreetCam and cigarette lighter 3 Mount the STREETCAM a Orient the unit upright Firmly press the mounting bracket onto the windshield Hold for three seconds to secure b Loosen the screws on the mounting bracket to adjust the mounting angle Tighten screws to secure mounting position NOTE See Mounting StreetCam page 14 for mounting tips CAUTION Always have a clear view of the road Adjust the positioning of t mounting unit on windshield 12 a he StreetCam so that it does not affect your driving reflexes and traffic awareness Check local laws before Mounting Bracket 1 1 Mini jack connector Transmits GPS tracking i
9. NSTALLING AN EMERGENCY BUTTON uo 15 RECORDING WITH STREET A Misco 16 STREETCAM VIEWER INSTALLATION ul 17 STREETCAM VIEWER MAIN SCREEN i 18 i A MODE ER MSR lechat 20 ENABLING GOOGLE MAPS VIEW soso 22 OE PSE E E S r et B A B a Be 23 STREETCAM CONFIGURATION assi 23 gt 2d W Care E et JPY RO R rete cre rere iret PO NEO reece VM 30 USERS DIRECTO Nata 31 IROUBEESROOTINO socias 34 RELPEUL AIN DS RR ra 35 TES FOR SUING GPS maana 36 TIPS FOR USING SD MEMORY CARD ie 3 TROUBLESHOOTING ccc cece e eee e recat e rece ee K KKK K KKK KK KA OAK PAKA Kant 38 WARNING Do not insert unrelated objects into the product as it may cause a fire or electric shock Do not clean the unit with liquid as it may damage the product and cause a fire or electric shock Do not adjust the unit while operating the vehicle Do not disassemble repair or modify the unit for it will void the warranty Keep the unit To prevent data out of the sun loss turn off the Direct sunlight device prior to will distort removing the the image o gt SD card If the unit begins For better visual to smoke turn off quality keep the the product lenses clean immediately WARNINGS CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightening flash with arrowhead symbol within an e
10. SLICCL Vehicle Recorder T User Manutii version 3 3 01 l MEM StreetCam Digital Video Recorder Contact Information StreetCam 7560 Central Parke Boulevard Mason OH 45040 USA Web site www mystreetcam com Local Phone 513 770 0550 Local Fax 513 770 0176 North American Sales 877 237 3100 x201 Email sales mystreetcam com Technical Support 877 237 3100 x203 Email technical support mystreetcam com Customer Support 877 237 3100 x202 Email customer_service mystreetcam com LEGAL NOTICE Copyright 2010 StreetCam All rights reserved Acrobat is a registered trademark of Adobe Systems Incorporated Microsoft and Microsoft Windows registered trademarks of Microsoft Corporation The information contained in this guide is subject to change without notice This manual was last modified on 06 7 2010 As our products are subject to continuous improvement we and our subsidiaries reserve the right to modify product design specifications and prices without notice and without incurring any obligation Table of Contents NAV ASIII oo A E 4 FEATURE G meer renee rr reer rine alt eds olo aaa 6 Fe ODOC AC ONIN Sec T BEFORE YOU BEGIN tornillo babo boa kov basa ua babo boa 8 ED OL SA al Se O cr ere err err errr 10 SE EII ATTON SA aa 11 BASIC INSTALLATION cece eect eee eter eee ee eae eee saan KK K eee seaeeeeeeesaaeeseaeeeesaaeessaeeeesaees 12 MOUNTING BRACKET acia 13 MOUNTING S EREETCAM Gbit 14 I
11. ar will display nove Z axis Up 8 Right movement 20 Play Modes When playing the recorded files they are distinguished by category such as normal emer gency impact and over speed The files are displayed in order by year month day time minute second event i ZN _ Time Date Even mn 707723 0 TIE TT Event search icon divides event categories 2009 07 s 2x hi Di 4x FF a we c Om a e CHA s BIS He When you click the event button the video playback stops and the event search window box will pop up Search by checking the incident type in the corresponding box The application will then display a result list for your selected incident types T LD Event Search Event List If there is no data for IMPACT your selected incident SUDDEN STOP type a warning box SUDDEN START will pop Up Application 21 Enabling Google Maps View StreetCam viewer displays the location of your vehicle on Google Maps This feature allows you to pinpoint the location of an event Full screen viewing mode disables Google Maps View To start Google Maps view click the play icon on the Google Maps window Google Maps connects and shows the current location of the vehicle on the map Time Date 2009 07 23 07 32 12 2009 07 27 16 24 51 2009 07 27 16 56 40 2 different types of maps are avallable Map amp Hybrid ae Sa at AN E d M NOTE Google Maps requir
12. ation User info If security is needed for the recorded data on the SD card you can restrict access by creating a separate ID and password Caution Recorded data will not be accessable if the ID and the password are forgotten We recommend writing down the ID and Password and storing in a safe place 2 Setup Removable Disk Drive Format Before using an SD card in your StreetCam you will need to format it This will ensure your Data is recorded accurately and can be viewed easily using the viewer Select the drive from the list on the left and click the Drive Format button A new window will open Setup Default Settings System Event User Settings Removable Disk version Removable Disk Select Drive Drive Information Unknown dl DOES TOTAL SIZE MB FREE SPACE MB Restoration Drive Format Format Removable Disk G Warning Formatting erases all Ent Tana 3 72 GB existing data on the card File system FAT32 Default Allocation unit size 32 kilobytes Restore device defaults The Drive capacity will be automatically detected Do not mm change the File System Allocation Unit and Format options in from the default settings as shown on the right Street Cam works at optimal performance using the default set tings Format options Y Quick Format Click Start to format the drive After formatting SD card please insert it into StreetCam and connect the power Three folders data up
13. checkbox under Audio ON OFF to enable or disable sound 6 Click the browse button under Backup Data Path to select the directory you wish to save your file and then click Save 7 Click Next to backup and compress your video A confirmation window will appear 39 Applving Changed Settings When modifying or updating the settings on your StreetCam please be certain to follow the process outlined below 2 Insert SD memory card 1 Take out SD memory into the PC card from the StreetCam unit 3 Run StreetCam viewer See page 17 amp 18 4 Open configuration and change the setting See page 24 29 5 Close the StreetCam viewer and take out the SD memory card 6 Insert SD memory card into StreetCam and turn on the power 34 Helpful Hints For optimal performance please keep the following in mind when using your StreetCam Insert SD memory card the proper way prior to starting the device A beeping sound will be heard when inserting or removing the SD memory card from the device The power MUST NOT be turned off when up grading the firmware the GPS REC and POWER LED lights will be lit while upgrading Be sure to backup your data before overwriting the SD card STREETCAM will be overwritten when the memory is full 35 Tips for using SD memory card Long term usage in SD memory card might be a cause of loss of data so please purchase a new memory card for use Loss of data due
14. date config automatically create and a system cgg file which has the de fault settings data should be created in the config directory 28 Setup Removable Disk Restoration This tab is used for Restoring or Formatting a SD card If your unit stops recording properly restoring can reset the SD card back to the original state at time of purchase However any data stored on the card will be lost Setup Default Settings System Event User Settings Removable Disk version Removable Disk Select the SD card from the Select Drive Drive Information drive list on the right Then CA DISK click the restore button TOTAL SIZE MB Your computer will run a FREE SPACE MB Check disk program that will check your SD card for cor rupt data and remove it a Ne u C Windows 2 chkds When Restoration begins a DOS WIN The type of the file system is FAT32 Volume dismounted All opened handles to this volume are now invalid dow will open After restoring the SD card Uolune Serial Number is AD24 GBP6 Windows is verifying files and folders the DOS window automatically closes File and folder verification is complete Windows has checked the file system and found no problens 3 990 889 256 bytes total disk space 360 448 bytes in 11 folders 4 511 981 856 bytes in 64 files 12 478 505 984 bytes available on disk 32 768 bytes in each allocation unit 141 792 total allocation units on disk 75
15. ding if an emergency event occurs Infra Red IR LEDs for night vision recording inside the vehicle STREETCAM Viewer Manage backup and view your recorded videos Easy and intuitive menu navigation e View your video while tracking the location of your vehicle with Google Maps Internet connection required Save video files for easy sharing Sort videos by event type Product Contents StreetCam Power Cable Video Out External SD card External Emergency ey Sane reader optional Button Mounting Bracket Electronic manual SDHC Memory Card Located on Software CD T Before You Begin To set the time and date you must first install the StreetCam Viewer software included on your home computer To install the StreetCam Viewer software 1 Insert the StreetCam Viewer CD into your PC s CD DVD drive Locate the StreetCam 3 x x exe file on the CD zu Setup exe i StreetCam Setup Evejdata Inc i A ELLE ODELLLECOLECECCEKCETEE 2 Double click the StreetCam 3 x x exe file The installer window appears Click Next 3 Read and scroll to the very bottom of the software User Agreement Select the I accept the agreement box and click Next Figure 1 4 The Select Installation Method window appears Choose Automatic Installation or Man ual Installation and click Next Setup StreetCam License Agreement Please read the following important information before continuing E
16. es an internet connection to retrieve map data sa 2 A Map k A Mall 22 Open amp Back Up Buttons E over Select and playback the recorded video data B rowse for Folder Open Data Folder RE Desktop Gia Network a Libraries JA acteam a M Computer EZ Win7 C ca WinXP D ca data e E li DVD RW Drive F e Removable Disk G me Insert the SD memory card into your card reader or computer and then select the drive from the list Choose the data you wish to view then Click OK e for Folder Open Data Folder MB Desktop Ga Network Libraries JA acteam a j Computer 4 Win7 C ca WinXP D ca data E E DVD RW Drive F e Removable Disk G di HR Backup Data Settings Select Image JPEG Lx Ja Browse for the directory you wish Select the type of file you would like to save to save your picture in Click OK either image or video and Click OK 23 Setup System Camera Settings V aaa arung Camera Settings Inside Cam Outside Cam Normal Normal Event 20 Event Quality High Quality Audio Y Using Standard time zone GMT 00 00 Greenwich Mean Time Dublin Edinburgh Lisbon London v Automatically adjust dock for daylight saving changes Auto Reboot Km Miles AM 03 00 JANUS will be rebooted every day for the stablity of opera
17. n refer to the Before You Begin section on page 8 of the user manual 17 StreetCam Viewer Main Screen StreetCam s main screen Before opening the recording data O Y 7 777 A Vehicle Recorder Click on the Settings lcon and then the User Settings tab to enter a new user name and password Click OK to save them in the system If security is needed for the recorded data on the SD card you can restrict access of other people by creating a separate User ID and password Caution Recorded data can not be accessed if the ID and the password are forgotten StreetCam recommends writing down the ID and Password and storing it in a safe place Be sure to insert the SD card into the StreetCam s SD card slot while driving 4 recording To play video pull out the SD card from the StreetCam and insert it into your PC s card reader You will have to enter the ID and password on StreetCam viewer 18 StreetCam Viewer Main Screen Continuted Terence FIT a Tumaco a Joma Ce TECOS el o 19 Play Modes Play Buttons Move 1 frame backward PS Play backward e Move 1 frame forward 1 Channel play 2 Channel Play 2 Channel in one time PIP Time Date Event 2009 07 23 07 32 12 IMPACT 2009 07 27 16 24 51 NORMAL 2009 07 27 16 56 40 NORMAL ajajaja a d a X axis Front amp Rear movement G Sensor Graph When the event happens the impact level n of left amp right up amp down front amp re
18. nformation to the StreetCam 2 GPS Antenna The GPS Global Positioning System antenna tracks your current location in relation to satellites orbiting around the globe and records this information onto the SDHC memory card When watching videos with the StreetCam Viewer you can track the location and speed of your vehicle on Google Maps NOTE The built in GPS antenna DOES NOT act as a portable navigation system The purpose of the GPS antenna on the mounting bracket is to track your location and transmit the information to the SDHC memory card only See Enabling Google Maps View 3 Mounting Bracket Screws Tightens and loosens the mounting bracket elbow Twist screws clockwise to tighten counter clockwise to loosen 4 Mounting the StreetCam at the correct angle allows the unit to receive optimal GPS reception and recording angles NOTE Apply double sided adhesive to the mounting bracket base and orient unit up right before mounting 13 Mounting StreetCam To mount your STREETCAM for the first time 1 Secure unit to the right of your rear view mirror NOTE Position the unit so that it does not interfere with your view 2 Press and hold the mounting base firmly to the windshield for three seconds to secure the unit in place 3 Plug in the car adapter to the StreetCam and into the cigarette lighter to power up REMINDER The mounting bracket adhesive has a powerful bond to surfaces Double check the m
19. ounting position before securing in place 4 The Driver View Camera adjusts to three angles Push cam era up or down to lock in place Adjust the angle of the mount ing bracket by loosening the screws on the side 5 Tighten screws to secure position NOTE The StreetCam takes 30 seconds to start up Wait for the GPS LED to glow solid green followed by a beep before driving The REC and POWER LEDs glow solid red During normal operation the REC GPS and POWER LED will always be on 14 Installing an Emergency Button The Emergency button extension allows you to bookmark an event as an Emergency for easy searching in the StreetCam Viewer Emergency recordings capture video at 30 frames per second FPS for enhanced detail Place the emergency button extension where you can easily reach To install the Panic Button extension cable 1 Remove rubber cover on the side of the unit with a thin rigid object Figure 1 2 Insert the end of the panic button extension into the EMGCY port Figure 2 3 Run the cable along the dashboard to conceal the cable out of view 4 Remove the double sided adhesive on the back of the panic button and stick on surface Figure 3 NOTE The end of the panic button extension con nects one way into the EMGCY port Do not force Using the Emergency Button Figure 1 Figure 3 Figure 2 The emergency button engages the StreetCam to record at maximum quality and marks
20. quilateral triangle is intended to alert the user to the presence of uninsolated dangerous voltage within the product s enclosurethat may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to AN the presence ofimportant operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE PRODUCT FEATURES The STREETCAM features a built in GPS antenna h 264 video compression for ultra clear video and intuitive playback software for archiving and viewing recorded videos STREET CAM is designed to record daily driving events inside your vehicle and from the driver s view Use the included STREETCAM software to play back the events STREETCAM Features 4 hours 15f sec recording time on a 4 gigabyte SDHC memory card included Supports a maximum of a 32GB SDHC memory card e 2 high resolution color cameras to record a vehicle s interior and driver s view e Viewing angles Driver view camera 120 field of view In Car view camera 175 field of view e H 264 video compression for high quality compact video files Record driving events and pinpoint the location of the event using Google Maps Internet connection required Integrated GPS antenna impact sensor and microphone Automatically tags recor
21. recalculation takes time Recalculating will take longer depend ing on the time difference from the last stored GPS data see calculation estimates below NOTE The built in GPS antenna DOES NOT act as a portable navigation system The pur pose of the GPS antenna on the mounting bracket is to track your location and transmit the information to the SDHC memory card only Recalculation Estimates A few minutes after the power has been turned off About 15 seconds One day since the power has been turned off 15 30 seconds 3 days or more since the power has been turned off 90 seconds 37 Troubleshooting Power Doesn t turn on Missing Recorded files Images show on monitor but can t be recorded Can t play recorded file Objects recorded are blurry SD memory card StreetCam Viewer not installing Missing images frames SD memory card cannot be read Recording time date incorrect Possible Solutions Check if the power cable is connected Check the power voltage Check the fuse for the cigarette power jack If you still encounter problems please contact your distributor or retailer Check if the recorded SD card is inserted correctly Check the SD memory card Format the SD memory card Make sure that the SD memory card is not locked If you still encounter problems please contact your distributor or retailer Check if the SD memory card is installed properly Possible SD memory card reformatting may be
22. the unit to flash for several seconds This means the StreetCam has book marked the event When an event is bookmarked you can easily categorize and find the par ticular moment in the Event window when you encountered the sudden bump or impact See Viewing Recorded Video Files for details on how to find videos by events 16 StreetCam Viewer installation 1 Run STREETCAM 3 X X exe file from the Installation CD If the Operating System OS is VISTA right click the mouse and install Foreign languages are provided and the program will be translated according to the PC s OS Setup StreetCam La Setup StreetCam Select Destination Location by Installing DI Where should StreetCam be installed E Please wait while Setup installs StreetCam on your computer E CJ 5 ill install S Cam into the followina fold Extracting files o o o a do eae C Program Files StreetCam data 20090727165212_00 cfs To continue click Next If you would like to select a different folder click Browse lama C Program Files StreetCam At least 342 3 MB of free disk space is required Setup StreetCam y Completing the StreetCam Setup Wizard Click Finish Setup has finished installing StreetC ter Th apcicalion in be launched by selecting the installed ee j S t re etC a m Click Finish to exit Setup Vi ewe r WI Launch StreetCam automatically launch For more informatio
23. tion 1 Camera setting Setup recording frames per second for each camera Normal Setup frames of normal recording default is 15 frames second Event Setting frames of event during an event Resolution Recording resolution can be set to Very high high normal low or very low Resolution will depend on SD memory capacity V Default frames Normal 15 Event 20 Very high resolution V Event frame must be higher than normal frame when it s set up V With very high resolution the best supported frame is 20 frames per second 24 Setup System Other settings System Event User Settings Removable Disk Version Camera Settings Inside Cam Outside Cam Normal Normal Event Event Quality Quality Storage method Once Standard time zone GMT 00 00 Greenwich Mean Time Dublin Edinburgh Lisbon London Recyde V Automatically adjust dock for daylight saving changes Y Auto Reboot Km Miles A AM 03 00 JANUS will be rebooted every day for the stablity of operation 2 Audio audio recording in use or not 3 Saving Method Once When the SD memory card is full the device will stop recording Recycle When the SD memory card is full it will automatically overwrite only the normal mode data saved on to the SD card from the beginning 4 Standard time zone Set the appropriate time
24. to overuse of a memory card is not the responsi bility of the manufacturer Any loss of data due to third party use is not the responsibility of the manufacturer Always back up important data We recommend using an SD memory card that has completed the reliability test For stable use of product format SD memory card FAT32 at least once in a month Provided SD memory card is strictly for STREETCAM use only Putting other files on the memory card could potentially cause damage Please use SDHC card reader only Make sure to turn off the device before taking out the SD memory card Compatibility table These cards meet the recommended specifications SDHC Class 6 Transcend SDHC Class 6 LG SDHC Class 6 SanDisk Ultra Il SDHC TOSHIBA SDHC Class 4 Minimum system requirements for using StreetCam viewer CPU Memory more than P4 Dual core 512M OS Windows XP Home Pro Vista Graphic DirectX 9 0C or higher HDD 200MB of free space Image or voice data can desynchronize or freeze depending on computer capabilities 36 Tips for using GPS 1 GPS connection time will vary depending on the vehicle s location and or surround ing environment 2 GPS signal can be degraded by the sun visor of the vehicle 3 Make sure the GPS bracket antenna cable is still plugged into the product when the power is off GPS calculates the location based on the signal from satellites Due to the constant move ment relative to the satellite
Download Pdf Manuals
Related Search