Declaration Notice Main features Layout
Contents
1. drive Turn the power switch on The computer should detect the station and the drive and assign the next available drive letter to the hard drive Page 2 of 7 HDD Docking Station for 2 5 3 5 SATA HDD with eSATA Connector User Manual Removing the drive from USB connection To remove the hard drive from the docking station use the safely remove hardware tool in the System Tray in the lower right hand side of the screen to unmount the drive Safely Remove Hardware Select the drive to stop and click on the stop button attested a buco geal aa computer Hardware devices Turn the Docking Station OFF and allow a minute or amp ee se Generic volume G so for the hard drive to spin down before removing it PN SE Mase Storage Device Se WDC WD32 004VJS 63TBAO USB Device fro m t h e stat i on fe Generic volume H Take hold of the drive with one hand and slowly rotate the HDD Ejector lever clockwise until the drive HSE Mass Stems Devica at Location 0 is free of the contacts Properties Stop Display device components Close Removing the drive from eSATA connection While eSATA allows you to hot plug a drive when connecting it there is no simple way of disconnecting the drive once connected It is recommended that the computer be turned off before removing the drive from the Docking Station The Drive can be stopped through the Device Manager applet in the following man2. the Docking Station when not required There are some issues with the PCClone EX Lite software when used on Motherboards with VIA or SIS chipsets We are unable to support these at this time Drivers for Win98 ME are not available The use of the Docking station on operating system other those specified is not supported Page 6of7
3. up files will be now shown in the right hand panel of the widow for Ver 20008 confirmation a 7 Click on the e icon to minimise the window to the system tray Page 5 of 7 HDD Docking Station for 2 5 3 5 SATA HUD with eSAIA Connector User Manual For more detailed instructions for using this program please read the instruction manual located in the PCClone EX Lite_ENG_ pdf file located in the Guide folder of the CD Technical specifications External Interface eee eSATA HDD Capacity UPTO1TB Powersu Input 240 VAC 50Hz PR Output 12V DC 2 0A Casing Material System Requirements Hardware Windows 2000 XP Vista and Mac OS 9 0 and above Software Windows 2000 XP Vista Troubleshooting No power to Docking Station Drive inserted in Docking Station but not shown on computer Hard Drive in Docking Station gets hot even when the drive is not being accessed Back Up software not working when connected by eSATA Cannot find drivers for Windows 98 ME Check the AC adaptor is plugged in and the switch is on Check the switch on the back of the Station Hard drives must be partitioned and formatted before they can be accessible by the Computer Partition and reformat drive Drive has been formatted with a non compatible file system Reformat drive Hard drives fitted to the Docking station are constantly spinning the platters This where the heat is generated Remove the drive from
4. HDD Docking Station for 2 5 3 5 SATA HDD with eSATA Connector User Manual Declaration Thank you for purchasing Please read these instructions carefully before use Notice e Make sure that all cables are connected before turning the power on e Do not use the Docking station in extreme hot cold dusty or wet environments e Place the Docking station on a flat stable surface away from the edge e Do not remove hard drives or other devices from the Docking station if it is being accessed by the computer as this may corrupt data or damage the drive or device Please use the Safe removal tool to stop devices before removal e Do not drop hard drives in the bays Place them gently on to the connecters e Make sure that you are protected against static discharge before handling bare hard drives Main features e Plug and Play No drivers required when used on Windows 2000 or later or MAC OS9 or later e Allows quick change over of drives e USB 2 0 High Speed interface e eSATA connection e Stable base e Back Up Software Layout Description Description O i O A 3 5 amp 2 5 SATA SATA II DRIVE BAY F USB Connection SY B PowerLED J G DCPOWERSOCKET _ C HDD activity LED H POWERSWITCH O D Backup Button Requires software I eSATA Connection E HDD Ejector Lever o o o O Page 1 of 7 HDD Docking Station for 2 5 3 5 SATA HDD with eSATA Connector User Manual Connecting th
5. e docking station with the USB cable Connect the supplied USB cable to the rear of the Docking station and the other end to a spare USB 2 0 port on your computer Connect the AC adaptor to a power point and to the socket on the rear of the Docking station Do not turn the Docking station on until the hard drive has been fitted Connecting the docking station with the eSATA cable eSATA ports allow you to connect a hard drive on the outside of the computer but have it perform the same way as it would if it was fitted to the computer as normal eSATA allows for the auto detection of drives as they are fitted were as normal SATA ports will not detect drive being attached after the start up of the operating system If your computer is fitted with an eSATA connection plug one end of the eSATA cable in to the rear of the docking station and the other in to the eSATA port on your computer If there is no eSATA port on your computer the supplied eSATA bracket and socket may be fitted to your computer Please refer to the mother manual to locate the eSATA header on the board before fitting Connecting hard drives Turn the Docking station off at the power switch on the rear Pick the Hard drive up and position the drive so the label is facing toward the right hand side of the station and the drives contacts are facing down Carefully lower the drive in to the correct bay and ensure that drive is fitted snugly in to the bay Do not jar the hard
6. his license agreement If vou do not agree with these terms then Fret Co Lhd i unwilling to license the Software to you in which event you should return the full product with proof of purchase to the dealer from whom it was acquired within thirty days of purchase for a refund of the purchase price or by destroying all copies of the Software and the accompanying documentation 2 PC Clone EX Setup 2 00 08 x 4 Select your preferred instillation options and FNet click on the Install button pme PCClone EX Lite Setup will install to C Program Files4PcCloneEs Wi Create desktop shortcut Wi Run Program After Boot Up 5 Click on the OK button to finish the Z PC Clone EX Setup 2 00 08 kx installation B FNet EX Lite PC Clone EX Lite Setup HDD Docking Station for 2 5 3 5 SATA HDD with eSATA Connector User Manual Basic use of PCLoneEX software PCClone EX Lite er A 1 To launch the software Double click on the Fies Backup USB Device x My Computer ii desktop ICON H T s Local Disk C 3 P Qc O mtvconvertertmp O Config Msi aro 5 M eeedd02 tbs O archive documents J O Documents and Settings H Boot NV O admin O Brother H N O Administrator O cdtemplates H N O All Users H O Contig Msi H N Default User O data2files H V O LocalService 2 Inthe Quick Launch Window c
7. lick on the Ee aa Le iaa O downloads Back up button As circled right Ae Ver 2 00 08 i PCClone EX Lite a A amp Files Backup USB Device a My Computer Se Local Disk C 7 S Local Disk F 3 The message box Please select file s will appear Please click on the OK button BECen PI LD Please select file s FNet PCClone EX Lite 4 Use the left panel to select the folder or files 5 a A Files Backup USB Device that you want to back up and click on the Y My Computer s Local Disk C V O mtyconvertertmp aT amp Sl H O archive documents icon to start the back up and then T O Bont H G cdtemplates click the start button on the confirmation TE Cortas MO Documents and Settings box H O downloaded programs CE dowload Ae tot ame Ver 2 00 08 5 During the backup information about the PCClone EX Lite progress of the files being backed up will be 5 GY A Se Boz displayed You can stop the back up at any Backup data from PC to USB HD P ah ets ee een a Settings T emp NAV1 a eian a otal Hes i PLES ime Clapse UU time by clicking on the Cancel button A Processed 437 Files 50 15M Bytes Total Time 00 24 47 Backup File C Documents and Settings Administrator 4pplication Data Nero Nero8 OnlineS ervices regi pop up box will be shown when the backup is complete Click on the OK button 6 The backed
8. ner Open the Device Manager window and expand the Disk Dives group to display all attached hard drives Locate the drive attached with the docking station and right click on the drive Select Uninstall from the options menu and then click on the OK button in the confirmation box The device manage will refresh and show that the drive is no longer connected You should always ensure that no programs are accessing the driver before it is removed in this method Do not remove the drive from the Docking Station if the Hard Drive activity light is red Disconnecting a hard drive during the read write process may cause corruption of data or damage the drive Page 3 of 7 HDD Docking Station for 2 5 3 5 SATA HDD with eSATA Connector User Manual Backup software instillation 1 Insert the supplied CD in to the CD DVD reader and open the folder called PCCLONEEX_LITE_2 00 08 JM329 and then the folder named PcCloneEx lt PC Clone EX Setup 2 00 08 x FNet PCClone EX Lite Welcome to use PC Clone EX Setup Wizard 2 Double Click on the SETUP EXE program to begin the instillation Click on the Install button to proceed 7 PC Clone EX Setup 2 00 08 x 3 Click on the Next button to accept the FNet license agreement and continue with the m PCClone EX Lite Insti ation License and Warranty Agreement By using the enclosed Software you indicate your acceptance of all terms and conditions of t
Download Pdf Manuals
Related Search