SE535LTD Earphones User Guide (English)
Contents
1. 2011 Shure Incorporated 27A16273 Rev 1 Sound Isolating Earphones Shure Sound Isolating Earphones built with balanced armature speakers deliver a detailed soundstage free from outside noise The powerful and stylish Shure SE earphones come with a detachable cable adapters a durable carrying case and interchangeable Sound Isolating sleeves for a comfortable and personalized fit Printed in China Detachable Cable You may need to detach the cable from the earphones to attach optional components or to replace the cable if it becomes damaged To prevent accidental separation the connector has a snug fit Take special care to prevent damage to the earphone and connector Do not use pliers or other tools Grasp the connector and the earphone as close as possible to where they join Pull straight apart do not twist Cable is a snap fit not threaded Do not pull on the cable or put any pressure on the earphone nozzle Listen for a click when connecting When reattaching the cable match the L and R markings For clear cables and earphones match the color dots Red Right Blue Left Note If you pull at an angle the connector will not detach Audible click when properly seated Wearing the Earphones The following are some suggested ways of wearing the earphones Over the ear in back Wearing the cable over the ear Tighten the cable and take up and securing it behind the2. head slack by raising the cable cinch can help keep the earphones in place during physical activity Inserting the Earphones Insert the earphones so they form a light seal The fit of the earphone can greatly affect sound quality Important If there seems to be a lack of low frequency response bass this means that the earphone sleeve is not forming a tight seal Gently push the earphone deeper into the ear canal or try a different sleeve Warning Do not push the earphone sleeve beyond the ear canal opening Changing Sleeves Twist and pull to remove the sleeve from the nozzle WD ja u Slide on a new sleeve so that it completely covers gt the barb and the nozzle Caution If the barb or any of the nozzle is exposed the sleeve is not properly installed Replace sleeves If they do not tightly grip the nozzle To ensure proper fit and performance use only sleeves supplied by Shure unless us ing custom molded sleeves Removing the Earphones Grasp the body of earphone and gently twist to remove Note Do not pull on cable to remove earphone Choosing a Sleeve Select an earphone sleeve that provides the best fit and sound Isolation It should be easy to Insert fit comfortably and easy to remove Soft Flex Sleeves In small medium and large sizes Made from pli able rubber Soft Foam Sleeves Compress the foam sleeve between your fingers and insert into the ear canal Ho
3. 62 9249114 Email EMEAsupport shure de AD 14 SHURE SHURE Incorporated http www shure com United States Canada Latin America Caribbean 5800 W Touhy Avenue Niles IL 60714 4608 U S A Phone 847 600 2000 U S Fax 847 600 1212 Int l Fax 847 600 6446 Europe Middle East Africa Shure Europe GmbH Phone 49 7262 92 49 0 Fax 49 7262 92 49 11 4 Asia Pacific Shure Asia Limited Phone 852 2893 4290 Fax 852 2893 4055
4. es if they do not fit properly Do not attempt to modify this product Doing so will void the warranty and could result in personal injury and or product failure Note The cable connectors to the earphones may collect debris or other deposits that can affect audio quality If this happens disconnect the cables and clean them using a dry cotton swab WARNING This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm 12 Technical Specifications SE535LTD Red Transducer type Triple balanced armature drivers Sensitivity at 1khz 119 dB SPL mW Impedance at 1kHz 36 2 Freguency Range 18 Hz 19 5 kHz Input connector 3 5mm 1 8 in gold plated stereo plug Net weight 30 g 1 oz Operational 18 C to 57 C 0 F to 135 F temperature Storage temperature 29 C to 74 C 20 F to 165 F CERTIFICATION Eligible to bear CE Marking Conforms to EMC Directive 2004 108 EC Meets applicable tests and performance criteria in European Standard EN55103 1996 parts 1 and 2 for residential E1 and light industrial E2 environments The Declaration of Conformity can be obtained from the address below Shure Europe GmbH Authorized European representative Shure Europe GmbH Headguarters Europe Middle East amp Africa Department EMEA Approval Jakob Dieffenbacher Str 12 75031 Eppingen Germany Phone 49 7262 92490 Fax 49 72
5. ld in place for about ten seconds while the foam expands Triple Flange Sleeves If desired use scissors to trim the stem on the sleeve E we gt Cleaning the Earphone Nozzle If you notice a change in sound guality remove the sleeve and check the nozzle of your earphone If nozzle is blocked clear obstruction by using wire loop end of cleaning tool Cleaning Caution When cleaning do not force any object through the earphone nozzle This will damage the earphone sound filter Warning The cleaning tool is only to be used to clean the earphones Any other use such as using the tool to clean ears could result in injury 10 Accessories Earphone Sleeves Music Phone Accessory Cables Replacement Cables Volume Control Carrying Cases Adapters For more information visit www shure com 11 Maintenance Careful maintenance ensures a tight seal between the sleeve and nozzle improving sound quality and product safety Keep the earphones and sleeves as clean and dry as possible To clean sleeves remove them from earphones gently rinse in warm water and air dry Foam sleeves require a longer drying time Inspect for damage and replace if necessary Ear sleeves must be completely dry before reusing Wipe the earphones and sleeves with mild antiseptic to avoid infections Do not use alcohol based disinfectants Do not expose earphones to extreme temperatures Replace the sleev
Download Pdf Manuals
Related Search