T-6203_Manual - ITC Audio
Contents
1. a long periodof time a fire or damage to the unit may result If dust accumulates on the power supply plug or in the wall AC outlet a fire may result Clean it periodically In addition insert the plug in the wall outlet securely Switch off the power and unplug the power supply plug from the AC outlet for safety purposes when cleaning or leaving the unit unused for 10 days or more Doing otherwise may cause a fire or electric shock An all pole mains switch with a contact separation ofat least in each pole shall beincorporated the electrical installation of the building Due to product upgrades while some of the features and specification inthe user manual does not match the actual functions sorry for any inconvenienceand thanks for your kind understanding A 2 GENERAL DESCRIPTION V I The T 6203 is a public address emergency panel with can provide an ideal public address solution from small to big places such us mosques schools hotels and factories to train stadium and air stations CV sew 1 With alarm trigger and siren output 2 One minute s recording IC for playing music 3 Output volume control 4 2 optional alarm modes A 4 NOMENCLATURE AND FUNCTIONS V I 4 1 FRONT PANEL CC dua RU sax PE esu ex O o ae e Q Q Q T 5 on 0 9 5 1 VOL 5 SELECTION SWITCH Recording volume control 2 ALARM MODE The alarm for a certain choic2. output spigot won t output siren signals till the trigger signal is relieved 1 Play recording alarm set the optional switch at MSG if there is a trigger signal being inputted in the siren spigot at the real panel then the output spigot OUTPUT will output recorded signals you can press STOP to cancelalarm according to the alarm mode by your command 2 Play recording to alarm when you set the optional switch at MSG press play knob ithas a recording sound output press alarm mode and select long alarm mode press play knob again then the re cording will be outputted repeatedly 3 When you haven t cancelled the input trigger signals in the alarm spigot at the real panel and place the optional switch at SIREN or MSG you can get corresp onding input 2 When the machine stands standby the STOP knob can t work others are as above Recording operation Before recording youneed erasethe whole recording and then record the detailed steps are as follows 1 Place the optional switch at LINE or MIC 2 Press START and STOP simultaneously and keep it for more than 3 seconds till the PLAY RECORD indicator light is ON simultaneously 3 PLAY indicator light is ON and RECORD light is OFF it express finished the erasure and the CMOS chip is empty 4 According to the record audio place the option switch at the LINE AND MIC make the switch and channel relatively and press the START to startup record At this mo
3. IVANVIAN NOILVYsAdO PUBLIC ADDRESS SYSTEM T 6203 ALARMING SIGNAL GENERATOR Please follow the instructions in this manual to obtain the optimum results from this unit We also recommend that you keep this manual handy for future reference J waste orcomrents 1 SAFETY PRECAUTIONS 02202200004 3 2 GENERAL DESCRIPTION 5 3 FEATURES n M 5 4 NOMENCLATURE AND FUNCTIONS 4 1 Font PANG LL 6 4 2 a se bean ethane amen ene 6 5 MACHINE OPEBRALTIQN cepisse venia tarta boxed e basique 7 tacet e i dedu orit ter st ie aesti 8 LSPEGIFICATIONS ES 9 8 DIMENSIONAL DIAGRAM 222 10 1 SAFETY PRECAUTIONS VI Be sure to read the instructions in this section carefully before use Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included e We also recommend you keep this instruction manual handy for future reference Safety Symbol and Message Conventions Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage which could result from mishandling Before operatin
4. e 3 START Start suspended or put the sound recording 4 STOP Stop recording setting the tone or options Optiona 4 2 REAR PANEL Siren Siren alarm signal output Fang recording Audio alarm output Curing Recording MIC Microphone recording LINE Line recording 6 POWER Power indicator 7 STANDBY SWITCH 1 Always power indicator light keyboard operable 0 Power indicator light flashes the keyboard can not operate ALARM IN ALARM OUT e MIC IN RECIN 8 AC POWER INPUT 9 ALARM IN Alarm signal input 10 ALARM OUT Alarm signal output a 11 MIC IN Microphone input 12 REC IN Audio line input DJ swacmeommmon 8 MANUALLY OPERATION 1 When the machine stands in the state of working 1 Siren alarms when you set the optional switch at siren press play knob then it has a shortsiren output press alarm mode and select longalarming mode press play knob again and it hasa longsiren output 2 Play recording to alarm when you setthe optional switch at MSG press play knob ithas a recording sound output press alarm mode and selectlongalarm mode press play knob again then the recording will be outputted repeatedly 2 When the machine stands standby you can t play siren or recording manually AUTOMAITC MODE 1 Siren alarms when you set the optional switch at SIREN if you input a trigger signal in the siren spigot at the real panel and the
5. g your product read this manual first and understand the safety symbols and messages so you are thoroughly aware of the potential safety WAR N Indicates a potentially hazardous situation which if mishandled could result in death or serious personal injury CAUTIO N Indicates a potentially hazardous situation which if mishandled could result in moderate or minor personal injury and or property damage A WARNING When Installing the Unit When the Unit is in Use Do not expose the unit to rain or an environment Should the following irregularity be found during where it may be splashed by water or other liquids use immediately switch off the power disconnect as doing so may result in fire or electric shock the power supply plug from the AC outlet and contact your nearest ITC dealer Make no further Use the unit only with the voltage specified on the attempt to operate the unit in this condition as this unit Using a voltage higher than that which is may cause fire or electric shock specified may result in fire or electric shock If you detect smoke or a strange smell coming from the unit Do not cut kink otherwise damage nor modify the If water or any metallic object gets into the unit power supply cord In addition avoid using the If the unit falls or the unit case breaks power cord in close proximity to heaters and never If the power supply cord is damaged exposure of place heavy objects including
6. ment PLAY light is OFF RECORD light is ON 5 CMOS chip is recorded fully or press the STOP key the RECORD light is off The chip can record one minute at the most 6 After finish the record make the option switch turn to PLAY MSG to play X A 6 APPLICATIONS REAR PANEL CONNECTIONS OIGNV 170 waviv 200 WalaridWwv 3sd LNdNI ADON39S3IW3 97 W EMERGENCY PANEL MODEL T 6203 INDICATORS Power LED Alarm work of the police state of indicator POWER REQUIREMENTS 220 240 50 60Hz POWER CONSUMPTION 30W DIMENSION mm 484X209X44 NET WEIGHT 4Kg GROSS WEIGHT 5 2Kg 8 DIMENSIONAL DIAGRAM UNIT mm 484 UJ C 7 440 6 Keep the units all sides over 10 cm away from objects that may obstruct air flow to prevent the unit s internal temperature rise 10 10 10 10 PUBLIC ADDRESS SYSTEM
7. the unit itself on the core disconnection etc the power cord as doing so may result in fire or If itis malfunctioning no tone sounds electric shock To prevent a fire or electric shock never open nor Be sure to replace the unit s terminal cover after remove the unit case as there are high voltage connection completion Because high voltage is components inside the unit Refer all servicing to applied to the speaker terminals never touch these your nearest ITC dealer terminals to avoid electric shock Do not place cups bowls or other containers of Be sure to ground to the safety ground earth liquid or metallic objects on top of the unit If they terminal to avoid electric shock Never ground to a accidentally spill into the unit this may cause a fire gas pipe as a catastrophic disaster may result or electric shock Avoid installing or mounting the unit in unstable Do not insert nor drop metallic objects or locations such as a rickety table or a slanted flammable materials in the ventilation slots of the surface Doing so may result in the unit falling unit s cover as this may result in fire or electric down causing personal injury and or property shock damage SAFETY PRECAUTIONS VI A CAUTION When Installing the Unit Never plug in nor remove the power supply plug with wet hands as doing so may cause electric shock When unplugging the power supply cord be sure to grasp the po
8. wer supply plug never pull on the cord itself Operating the unit with a damaged power supply cord may cause a fire or electric shock When moving the unit be sure to remove its power supply cord fromthe wall outlet Moving the unit with the power cord connected to the outlet may cause damage to the power cord resulting in fire or electric shock When removing the power cord be sure to hold its plug to pull Do not block the ventilation slots in the unit s cover Doing so may cause heat to build up inside the unit and result in fire Avoid installing the unit in humid or dusty locations in locations exposed to the direct sunlight near the heaters or in locations generating sooty smoke or steam as doing otherwise may result in fire or electric shock When the Unit is in Use Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal injury and or property damage In addition the object itself may fall off and cause injury and or damage Make sure that the volume control is set to minimum position before power is switched on Loud noise produced at high volume when power is switched on can impair hearing Do not operate the unit foran extended period of time with the sound distorting This is an indication of a malfunction which in turn can cause heat to generate and result in a fire Contact your ITC dealeras tothe cleaning If dust is allowed to accumulate in the unit over
Download Pdf Manuals
Related Search