Product Manual
Contents
1. 1 Aspect 2 Resolution Channel 868 0 5 UNITIES d eon seen ones seeseneseseenen 2 Manual Search 3 Country 4 Antenna Time 1 Time Offset 2 Country Region 3 Time 6 1 OSD Language 2 8 8 3 Subtitle Language 4 Digital Audio System Menu 1 Parental 2 5 1 8 3 Factory Default 4 Information PERSONAL VIDEO RECORDING PVR2. 13 PVR Scheduled Recording Viewing Using the EPG Schedule List Time Playback Recorded File USB MULTIMEDIA PLAYBACK AND SETTINGS 1 Music Playback 2 Picture slide 5 16 3 Movie 17 Photo Setting Movie 17 DVD 18 SWITCHING BETWEEN DVB AND DVD MODES DVD PLAYBAQCK eee eene ee eee ee eene nennen en nene annee nnne nene nne nennen nen enne nere e 18 DVD MENU 5 18 Language Setup Video Setup Audio 5 5 55 55555555 5 5
3. Tuned to digital Teletext channel Retune to another channel Distorted or freezing picture Aerial may not be compatible Check aerial Scrambled channel message Channel is scrambled Select an alternative channel Forgotten channel lock password Retune channels to erase channel lock No response to remote control Unit is turned off Plug in power and turn unit on Remote control not aimed correctly Aim remote control at the unit Obstructions between remote control and front panel receiver Remove obstructions Remote control batteries are incorrectly inserted Reinstall batteries according to correct polarities Remote control batteries are flat Replace remote control batteries Lost channel reception after moving the unit to another room The aerial feed may come through a distribution system which may reduce the digital signal now received by the receiver Try a direct feed from the antenna Bad disc is displayed Ensure the disc is not warped damaged stained or deformed Ensure the disc format is compatible with the player Please check whether you have tried to play a software CD If so please restart the player disc is displayed Ensure that you have inserted the disc correctly with the right side up Ensure the disc is not distorted stained or scratched 23 SPECIFICATIONS Item Specific
4. 555 Rating Misc Setup MP3 WMA JPEG MPEG4 DISC PLAYBACK Edit TROUBLESHOOTING SPECIFICATIONG nnn eere nenne nennen nen enne nnn ene enne ne nnne nenne enne neue IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this device near water 6 Clean only with dry cloth 7 Do not block any ventilation openings install in accordance with the instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other devices including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized plug If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the device 10 Only use attachments accessories specified by the manufacturer 11 Unplug this device during lightning storms or when unused for long periods of time 12 Refer all servicing to qualified service personnel Servicing is requi
5. Enter your new password 3 Re enter your new password to confirm After that press EXIT to exit the Menu 3 Factory Default Reset your Set Top Box to the Default Factory Settings 1 In the System Menu select Factory Default and press OK or RIGHT to select 2 Enter the current password and press OK to confirm Note This action will delete all saved channels and settings 4 Information View model hardware and software information PERSONAL VIDEO RECORDING PVR OPERATION Press the REC button to record TV programs directly from the current viewed TV channel Sub channels from the same frequency are still available for viewing while recording is in progress but recording must be stopped in order to change to channels from a different frequency Functions including MENU and EPG are also not available while recording is still in progress PVR Configure Select or format the connected USB device for recording To access this menu press the SETUP button navigate to the USB tab with the LEFT RIGHT buttons and enter the PVR Configure menu with the OK button Qr entm 13 1 Record Device Select the disk for the record 2 Format Format the selected disk WARNING This will erase all data on the disk Please back up all valuable information before reformatting a disk Note TEAC cannot guarantee compatibility operation and or bus power with all USB storage devices and holds no responsibility for any
6. EPG button on the Remote Control while watching TV to access the guide directly EPG controls with the Remote Control are as follows LEFT RIGHT button Browse previous next channel schedule UP DOWN button Browse previous next program on the schedule GREEN button Browse next day s schedule RED button Browse previous day s schedule BLUE button View detailed program information in full screen Qe mes Gar PVR Configure 3 Sort Sort channels using the following options LCN Sort channels in ascending order Name Sort channels in alphabetical order Service ID Sort channels according to the station ID ONID Sort channels according to ONID 4 LCN Logical Channel Number Set LCN on or off Picture Setting First press the SETUP button Access the Picture Setting menu by navigating to the Picture tab with the LEFT RIGHT buttons Press UP DOWN to select an option and press OK or RIGHT to adjust that setting Press the EXIT button to exit the Menu Picture Qram 1 Aspect Ratio Change this setting if the picture does not appear to fit the screen correctly AUTO This setting will automatically select the best ratio to match the broadcast picture with your TV The following choices are also available 4 3 Full 4 3 Pan amp Scan 4 3 Letter Box 16 9 Wide Screen Note Press the YELLOW button in TV viewing mode to cycle through aspect ratio 2 Resolution Change thi
7. actions are available Pause Press the PAUSE button to pause playback Press again or press PLAY to resume playing Stop Press the STOP button to stop playback Exiting to the main USB menu or the TV mode will also stop playback Forward Rewind Press and hold the buttons to fast forward rewind Repeat this motion to increase the speed The max speed is 32x Press PLAY to resume playing Previous Next track Tap the lt lt gt gt buttons for previous next track GOTO Press the GOTO button and enter a specific time to jump to in the current track in HH MM SS format Tip To play music and a picture slide show simultaneously start the music playback first Press RETURN to goto the Multimedia Menu and navigate to the image files per the instructions below The music will continue playing while the slide show is running 2 Picture slide show In the Multimedia Menu select the Photo option and press the OK button Locate your picture files by navigating with the arrow keys Press OK to enter a folder and the BLUE button to return to the previous folder When a picture file is selected press PLAY to start the slide show and all picture files listed in the folder will be played in sequence If OK is pressed the selected picture is displayed without the slide show function During the slide show the following actions are available Pause Press the PAUSE button to pause playback Press again or press PLAY to resume playing
8. an option and press OK or RIGHT to adjust that setting Press the EXIT button to exit the Menu 1 OSD Language Select a language for the device s OSD menu 2 Audio Language Select the preferred audio language for watching TV channels If the language is not available the default program language will be used Availability of this feature is dependent on the broadcasted service 3 Subtitle Language Select the preferred subtitle language Availability of this feature is dependent on the broadcasted service 4 Digital Audio Select digital audio output mode SYSTEM Multimedia Qe First press the SETUP button Access the System menu by navigating the System tab with the LEFT RIGHT buttons The menu provides options to adjust the system settings Press the UP DOWN key to select an option and press RIGHT LEFT to adjust the setting Press EXIT to exit the Menu 1 Parental Guidance You can restrict access to channels that are unsuitable for children according to the channel rating All channels and recordings that have ratings higher than the set limit will be locked and require password access using the current or Master password Scheduled recordings for a locked channel will record normally but also require password access as long as the restriction is in place 12 2 Set Password Set or change the password for locked channels 1 Enter your old password or the default password 000000 2
9. loss of data on storage devices that may occur when connected to this unit It may take longer for the system to read the contents of a USB device if it contains large amounts of data Some USB devices and external hard drives may not be properly recognised Even when they are in a supported format some files may not play or display depending on the content Scheduled Recording Viewing Using the EPG Automatically record or switch to a specific program at a set time by setting a schedule 1 Access the EPG by pressing the EPG button on the remote control 2 Selectthe desired TV program and press OK 3 In the pop up window you can adjust the channel type channel number start end time repeat mode and Record View mode if needed 4 Press OK to confirm the scheduling The Schedule List will be displayed 5 Press EXIT to return to watching TV Note Ensure that a USB storage device is connected and formatted correctly before recording program Please see PVR Configure instructions above for details Schedule List scheduled recordings and viewing events are listed in the Schedule List To view the Schedule List press the TIMER LIST button while watching TV Recording events are marked in orange and viewing events are marked in green Schedule 14 Time shift If a USB device is connected and ready for recording you can pause live broadcasts if you are interrupted while watching TV 1 Press
10. product repairs within a reasonable period based on available resources and workload during the time when service is requested and performed 9 Refurbished parts may be used to repair the product In the case of a replacement the product may be replaced with a refurbished unit of the same type or if one is unavailable a similar refurbished model with equal or better features amp specifications 10 Please be advised that if the product presented for repair is capable of retaining user generated data the data may be lost during servicing Customers are strongly encouraged to back up all important information data before sending the product in for service repair 11 Service will be provided only during normal business hours and under safety conditions and circumstances TEAC and its authorised service agents can refuse any repair if safety in relation to OH amp S becomes a concern to its staff or authorised service agents personnel 12 The warranty is void and warranty claims may be refused subject to the Australian Consumer Law if a The product was not transported installed operated or maintained according to manufacturer instruction or b The product was abused damaged tampered altered or repaired by any unauthorised persons or c Product failure is due to accidents during use installation or transit power surges use of defective or incompatible external devices exposure to abnormal conditions such as excessive temperatures
11. the PAUSE key during live TV broadcast to start Time Shift A progress bar will appear displaying the length of time the program has been time shifted 2 To resume watching from the paused point press the PLAY button The unit continues to record the current broadcast during Time Shift playback To exit Time Shift and return to the live TV broadcast press the STOP button Note If you Fast Forward and catch to the current live broadcast the unit will exit Time Shift automatically and resume real time viewing If the live broadcast is paused for a longer period than was set in the PVR menu and Time Shift recording reaches its limit the unit will return to live TV viewing During Time Shifting Scan Forward Back and GOTO functions are available Other actions including channel change MENU and EPG are not available Playback Recorded File List To view a list of recorded programs press the RECORD LIST key on the remote control Use the UP DOWN keys to highlight a program and access the following options Play File Press PLAY or OK while the desired file is highlighted During playback you can use the PAUSE STOP SCAN FORWARD SCAN BACK keys Preview File Press the RED button during playback to go back to a thumbnail view Press repeatedly to switch between preview and full screen playback Delete File Press the YELLOW button A message will appear on the screen asking you to confirm or exit Rename File Press the GREEN butt
12. the USB memory stick directly into the unit instead of using USB extension cables in order to avoid interference and failure during data transfer The electrostatic loads may cause the device to malfunction If this happens reset the device ACCESSORIES Before installing the unit please check the contents of the package The package should contain the following items Remote Control X1 pc AAA Battery for the Remote Control X1 pair User Manual 1 Serial Number label X2 pcs AV cables X Q Cables Brochure TEAC contact card X TEAC MODEL NUMBER USER MANUAL IMPORTANT Serial Number label Remote Control AAA Battery User Manual X TEAC CUSTOMER PORT HOTLINE 5 AV cables Cables Brochure TEAC contact card FRONT AND REAR PANEL OVERVIEW Front panel 1 2345 6 7 1 CABIN DOOR 5 SENSOR 2 POWER BUTTON 6 USB JACK 3 OPEN CLOSE BUTTON 7 POWER 4 PLAY PAUSE BUTTON Rear panel 1 RF IN 5 Pr Pb Y JACK RCA 2 RF LOOP THROUGH 6 L R AUDIO 3 HDMI OUT 7 COAXIAL 4 VIDEO JACK RCA 8 MAINS CABLE CONNECTION SETUP TV Aerial Audio Video Component video Composite Ampli
13. 9 9 SS Enable Antenna Power if an external active antenna is connected by accessing the Channel Search menu Program Settings First press the SETUP button To manage your TV channels access the Program tab and navigate with the directional buttons Select an option and press OK or RIGHT to adjust that setting Press the EXIT button to exit the Menu 1 Program Edit To edit channel preferences enter the Program Edit Menu This Menu requires a password to be accessed The default password is 000000 If you have lost your password use the Master unlock password 888888 7 Program Q confim While in the Program Edit menu follow the hints on the bottom of the screen to select actions fora currently highlighted channel After you have finished making changes press EXIT to save and quit the menu Available actions are described below Programme Edit ALT 2b 00233 003 3 24 004 K3 B00 Set a Favourite Channel Create a shortlist of favourite channels for easy access with these steps 1 Select a preferred channel and then press the FAVOURITE button 2 A heart shaped symbol will appear and the channel is marked as a favourite 3 Repeat the previous steps to list more Favourite channels To unlist a channel as a Favourite select that channel and press the FAVOURITE button again Press the FAVOURITE button while watching TV to show the Favourite channel list Delete a TV o
14. ANGLE M EPG FAVORITE TV RADIO TEAC co CoN a o Oo Oi WM ze ime o DO OC O RECORDLIST MUTE PLAY PAUSE SCAN SKIP FORWARD STOP EJECT SOURCE CH or UP DOWN COL or LEFT RIGHT RETURN EXIT SLOW GOTO Number Keys AUDIO SUBTITLE MENU ANGLE P N TV RADIO Button Functions BUTTON DVB MODE DVD MODE 1 RECORDLIST Display Recorded File List 2 MUTE Silence audio output Press again or press Vol to unmute 3 PLAY PAUSE Start or pause file DVD playback 4 SCAN SKIP FWD Tap once to skip to next track Press and hold to fast forward For different speeds up to 16x repeat this motion 5 STOP Stop recording or playback Stop playback 6 EJECT Open close disc tray 7 SOURCE Switch between DVB and DVD mode 8 or UP DOWN Change TV channels or Navigate menus navigate menus 9 VOL or LEFT RIGHT Change volume or navigate menus 10 RETURN EXIT Exit menus 11 SLOW Slow motion video playback Press again for different speeds 12 GOTO Jump to a specified time in the Jump to a specific track in the current video audio track disc 13 Number Keys Key in numbers for channel changing or certain menu settings 14 AUDIO Select available audio tracks 15 SUBTITLE Select ava
15. P3 WMA AVI JPEG CD PLAYBACK Day Your Bet EaglescHotel AM Hilton After the MP3 WMA AVI JPEG CD is loaded the CD contents will be displayed in a file browser as S hown above Navigate folders and files using the directional buttons Press OK on a folder to enter the folder Press OK on the Up Folder icon on the top to return to the previous directory Press OK or PLAY ona selected music or movie file to play it Filter Choose different file types to be displayed in the file browser Repeat Toggle between different repeat modes Mode Choose from different playback modes listed below a Normal Play files from the folder in a normal sequence b Shuffle Play files in shuffle mode All tracks will be played once in a random sequence c Music Intro Play only the first 10 seconds of each track Edit Mode Program a playlist by following the instructions below Program View Display playlist Browser View Display file directory Add to Program track to the programmed playlist Clear Program When playback is stopped completely press the STOP button twice use this option to delete tracks from the programmed playlist Edit Playlist Enter Edit Mode to program a playlist from available tracks Exit Edit Mode to play from the playlist 1 2 3 4 5 6 Select the Edit Mode option and press OK to enter Edit Mode Press the LEFT button to start browsing files Press OK on
16. Stop Press the STOP or EXIT button to stop playback Previous Next track Tap the buttons for previous next track 3 Movie Playback In the Multimedia Menu select the Movie option and press the OK button Select your desired movie file by navigating with the arrow keys Press OK to enter a folder and the BLUE button to return to the previous folder When a movie file is highlighted press PLAY to start movie playback When the movie ends the next movie file will play automatically if there are other compatible movie files in the folder During movie playback the following actions are available Pause Press the PAUSE button to pause playback Press again or press PLAY to resume playing Stop Press the STOP button to stop playback Exiting to the main USB menu or the TV mode will also stop playback Forward Rewind Press and hold the lt lt gt gt buttons to fast forward rewind Repeat this motion to Previous Next track Tap the buttons for previous next track GOTO Press the GOTO button and enter a specific time to jump to in the current track in HH MM SS format Subtitle Press SUBTITLE to choose subtitles subject to availability from the movie file Photo Setting Select and set preferences for the picture display and slide show function with the directional buttons Slide Time Set slide show interval between 1 8 seconds Slide Mode Set slide show transition effects from modes 0 59 or random Aspect Rati
17. TEAC DVS1000HD DVD DVB T Combo Player USER MANUAL IMPORTANT WARRANTY INFORMATION INSIDE PLEASE READ Trademark of TEAC Corporation JAPAN www teac com au TEAC WARRANTY PROCEDURE v1 5 2 DEC 2011 Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures 1 Please read this warranty card 2 Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service 3 If you require Warranty Service please contact the TEAC Customer Support Hotline at 1300 553 315 for assistance Please ensure that you have the model number serial number and purchase receipt ready when you call Please complete the section below and keep this information for your own records Owner s Name Owner s Address Postcode Model Name No Serial No Dealer s Name Dealer s Address Postcode NSW Queensland Western Australia 151 Arthur Street Unit 1 320 Curtin Ave West Unit 2 50 Pilbara Street Homebush West NSW 2140 Eagle Farm QLD 4009 Welshpool WA 6106 South Australia Victoria 11 McInnes Street 282 Normanby Road Ridleyton SA 5008 South Melbourne VIC 3205 Thank you for selecting a TEAC product If you should require assistance with your product regarding its setup or operation or if any difficulties arise please call us directly for advice between Monday to Friday at 8 30AM 6PM AEST at the TEAC Cu
18. annel frequency 3 Press OK to start searching Detected channels will be saved and added to the channel list 3 Country Select your country of residence 4 Antenna power Enable Antenna Power if an external active antenna is connected setting Press the EXIT button to exit the Menu Time Setting Time Auto western Australia First press the SETUP button Access the Time Setting menu by navigating to the Time tab with the LEFT RIGHT buttons Press UP DOWN to select an option and press OK or RIGHT to adjust that setting Press the EXIT button to exit the Menu 1 Time Offset Select auto or manual for GMT offset adjustments 2 Country Region Select the Country Region when Time Offset is set to Auto 11 3 Time Zone Selectthe Time Zone Offset when Time Offset is set to Manual 4 Auto Sleep If this setting is off this function does not work If this setting is not off a message will pop up after your preferred time to inform you that the device will go in to sleep mode This message will appear under no any operation Standard setting is 3 hours Press STANDBY button to exit sleep auto off mode Option Menu e Lie r7 Option English English English PCM First press the SETUP button Access the Option menu by navigating the Time tab with the LEFT RIGHT buttons The menu provides options to adjust the OSD Language Subtitle Language and Audio Language Press UP DOWN to select
19. ation General Power Requirement 100 240V 50 60Hz Max Power Consumption 15W Weight 1 3KG Dimensions 320x38x200mm Tuner Frequency Range VHF 174MHz to 230 UHF 470MHz to 862 MHZ Input impedance 75 Ohms unbalanced Signal Input Level 78 25DBM Bandwidth 7 8MHz Demodulation Demodulator COFDM OFDM Modulation 2K 8K FFT SFN and MFN Packet Carries 2K 8K Guard interval 1 4 1 8 1 16 1 32 Output VIDEO Composite Analogue Component Pr Pb Y HDMI AUDIO Audio L R Analogue Coaxial RCA for SPDIF digital audio RF IN IEC 169 2 female connector RF LOOPTHROUGH IEC 165 2 male connector USB USB2 0 Display Decoder module PAL NTSC Resolution 576P 720P 1080i Aspect Ratio 4 3 Letterbox Pan amp Scan 16 9 Decoding Video MPEG Transport MP GM Audio MPEG2 Audio layer 1811 Others Compliance ETSI EN 300 744 DVB T Compliance Sound Mode Right Left Stereo DVD Player Supported Formats DVD VCD CD R CD RW DVD RW AVI MP3 JPEG Specifications are subject to change without notice Weight and dimensions are approximate 24 CT1106 TEAC TEAC CUSTOMER SUPPORT HOTLINE TCS 1300 553 315 Between Monday to Friday EST 9AM to 6PM
20. axial audio output to suit an external audio device connected to the player Down sampling Turn the down sampling function On or Off Smart sound Set audio output settings to Off Classical Rock Jazz or Pop 19 Rating Setup Select the Rating tab in the Setup Menu to access this submenu Parental Control Set a rating limit for restricted viewing DVDs above the limit will require a password to be played This feature is dependent on the DVDs used Before using this feature please set a password Set Password Set or change a custom password with the following steps 1 Key in the current password and press the OK button If this is the first time a password is being set use the Master Password 6666 2 Press OK again to start keying in your new password Press OK 3 Key in the new password again to confirm Press OK The new password is saved when a Success message is displayed Language Parentalcontro 8 Adult Set Password 4 Video Audio Rating 77 Misc Note If you have lost your password please use the Master Password 6666 to unlock Misc Setup Select the MISC tab in the Setup Menu to access this submenu Language Use Default Settings Screensaver 4 Video Audio Rating Misc Use Default Settings Reset DVD player settings to factory default values This will not reset your custom password Screen Saver Enable disable the screen saver function 20 M
21. desired tracks in the desired playback sequence Select Add to Program to save the selected files into the playlist Select the Program View option and press OK to view the playlist Before starting playback exit Edit Mode by selecting the Edit Mode option and pressing OK again To remove tracks from the playlist select tracks while in Edit Mode then choose Clear Program 21 PICTURE CD PLAYBACK After the Picture CD is loaded the CD contents will be displayed in a file browser as shown above Navigate folders and files using the directional buttons Press OK on a folder to enter the folder Press OK on the Up Folder icon on the top to return to the previous directory Press OK or PLAY ona selected picture file to view it Picture Rotation Press the directional buttons to rotate the picture Picture Scan Press the ANGLE button to change picture scan mode P 006 EE 22 TROUBLESHOOTING If you experience problems with this Set Top Box or its installation please read the relevant sections of this User Manual and this Troubleshooting section carefully Problem Possible cause What to do Standby light is not lit Power cable is unplugged Check the AC power connection Power fuse is blown Check fuse No signal or channels found Aerial is disconnected Aerial is damaged misaligned Check aerial connection and condition Out of digital signal area Check with dealer Sound but no picture
22. fier VIDEO IN Please ensure that the power is completely disconnected before making or changing cable connections To connect the Set Top Box unit to your television please use any one of the methods below a Fora basic connection from your Set Top Box to the television set use the Composite Connection b Fora higher quality connection use the Component Video Connection combined with the Audio Connection c For the highest quality connection use a HDMI connection To connect to an amplifier plug one end of a coaxial audio cable into the coaxial digital audio socket on the unit and plug the other end into the matching socket on your audio receiver This feature is only available for amplifiers equipped with coaxial digital audio input connectors To connect to a DVD recorder or VCR use the AV cables to connect the external DVD recorder or VCR to the AV output jacks on the rear panel of the unit Note While HDMI is connected the Composite Connection will not be active 4 REMOTE CONTROL 20 21 22 23 24 25 26 27 28 29 30 31 32 STANDBY TIMER LIST SCAN SKIP BACK REC SETUP OK INFO TITLE TTX PROGRAM A B REPEAT EPG FAVOURITE 25 26 ERES STANDBY TIMERLIST RECORJLIST MUTE J SCANISKIP BACK SCANISKIP FORWARD 8 nm SOURCE m RETURN EXIT PROGRAM TITLEITTX AUDIO SUBTITLE AB MENU
23. ilable subtitles 16 MENU Display last DVD submenu or file browser 17 ANGLE Select available camera angles 18 P N Select picture resolutions Zoom in out 19 TV RADIO Switch between TV and Radio channels 20 STANDBY Turn the unit on off Standby Mode 21 TIMER LIST Display Schedule List 22 SCAN SKIP BACK Tap once to skip to previous track Press and hold to fast rewind For different speeds up to 16x repeat this motion 23 REC Start recording TV program 24 SETUP Access DVB settings menu Access DVD settings menu 25 OK Confirm a selected setting or play a selected channel file 26 INFO Show hide detailed information on currently playing media 27 TITLE TTX Display Teletext subject to Display main root DVD menu availability from broadcaster subject to availability on DVD 28 PROGRAM Program a playlist for DVD tracks by Title and Chapter 29 A B Press during playback set points A and B for looping playback 30 REPEAT Toggle Repeat modes Single Folder Off 31 EPG Display the Electronic Program Guide EPG 32 FAVOURITE Display your Favourite Channel List In order to operate any of the remote control functions the Set Top Box must be powered on When changing between DVB and DVD modes the Set Top Box will take a few seconds to reboot Inserting Batteries Remove the battery cover from the rear of the Remote Control and place two AAA size batteries inside the compartment Please ma
24. ke sure that the battery polarities match the polarity markings as marked in the compartment Using the Remote Control To use the Remote Control point it towards the front of the Digital Set Top Box as illustrated in the image below The Remote Control has a range of up to 7 meters from the Set Top Box at an angle of up to 60 degrees Note The Remote Control will not operate if its path is blocked Direct sunlight or very bright light will decrease the sensitivity of the Remote Control DVB DIGITAL TV MODE BASIC OPERATION AND SETTINGS Initial Setup and Channel Tuning After ensuring all connections are correct and secure switch on the power supply and switch on the TV Press the Power button to switch on the Digital Set Top Box If you are using the receiver for the first time or have restored the unit settings to Factory Default the INSTALLATION GUIDE will appear on your TV screen OSD Language Press the RIGHT LEFT key to select a language Country Press the RIGHT LEFT key to select your country of residence Channel Search Press the RIGHT or OK key to begin Automatic channel search Once channel tuning is complete you can start watching TV If no channels were found please check your external antenna setup For detailed instructions on Auto or Manual Channel Tuning please see the Channel Search section Installation Guide OSD Language 4 English Country Australia Channel Search ES EXIT Confirm 49 Note
25. nty Periods Table below from the date of purchase TEAC PRODUCT WARRANTY PERIOD LED LCD TV 32 80 cm and above 1 Year In Home Service Pick up Available All other TEAC products 1 Year Carry in Service 5 In Home Service Pick up Service This service will only be provided as part of this warranty if all the following conditions are met a The product is indicated in the Warranty Period Table b The product is within the warranty period The product is located within the normal service area of the local TEAC Authorised Service Centre If TEAC determines that the product is not repairable on site TEAC can complete the repair by taking the product to a TEAC Authorised Service Centre Carry in Service Where In Home service Pick up is not available the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair In this event proof of purchase is required to support a warranty claim After the repair the product will be available for collection by or return to the purchaser at a fee upon request TEAC in home service can be made available at a fee upon request 6 A 12 month replacement warranty is applicable to all Accessories such as Remote Power Adaptors and Cables T TEAC will ensure to the best of its abilities that all required parts are made available for any required service repair 8 TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete
26. o Display pictures in their original aspects Keep or in full screen Discard Movie Configure Select and set preferences for USB movie playback with the directional buttons Aspect Ratio Play movies in their original aspects Keep or in full screen Discard Subtitle Font Choose the subtitle font size from Normal Big Small Subtitle BG Choose the subtitle font background from Transparent Grey Yellowgreen White Subtitle Color Choose the subtitle font color from White Black Red Blue Green SWITCHING BETWEEN DVB AND DVD MODES Press the SOURCE button on the remote control to switch between DVB and DVD Modes The Set Top Box will take a few seconds to reboot while it changes functions Note Settings and passwords used in DVB and DVD Modes are mutually exclusive and do not affect each other The default settings and passwords may be different from each other DVD PLAYBACK Press the EJECT button to open the disk tray and place a DVD with the label side facing up on the tray Press EJECT again to close The DVD will load automatically and display its main root menu on the screen These menus vary for each DVD Use the directional buttons to navigate the menu and the OK button to select During DVD movie playback the following playback options are available Pause Play Pause or resume playback with the PLAY button Scan Skip Forward Tap once to skip to next track Press and hold to fast forward F
27. on An on screen alphanumeric keypad will appear Use the ARROW buttons to navigate around the keypad and press OK to select the keys you desire Select OK on the keypad to save and exit USB MULTIMEDIA PLAYBACK AND SETTINGS This feature is only available in DVB Mode To play multimedia files a compatible USB device must be attached If no compatible USB device is connected the message No USB device is Found will appear Note This unit only supports USB devices with a FAT32 file system It will not support NTFS file systems This unit supports AVI JPEG and BMP file playback However due to other variations in file formats some files may not play even though they are the supported file types Multimedia File Playback First press the SETUP button Select the USB tab using the LEFT RIGHT buttons to enter the USB Menu Select the Multimedia option and press OK to enter the Multimedia Menu In the Multimedia Menu choose from the different multimedia playback options Music Photo Movie and PVR Qe Q contin 1 Music Playback In the Multimedia Menu select the Music option and press the OK button Locate your music files by navigating with the arrow keys Press OK to enter a folder and the BLUE button to return to the previous folder When a music file is highlighted press PLAY to start music playback All music files listed in the folder will be played in sequence During music playback the following
28. or different fast forward speeds up to 16x repeat this motion Scan Skip Back Tap once to skip to previous track Press and hold to fast rewind For different fast rewind speeds up to 16x repeat this motion Slow motion Press the SLOW button for slow motion video playback Press repeatedly for different speeds A B Looping Press once to set Point A and a second time to set Point B Playback will start looping from Points A B To exit looping playback press PLAY or STOP Camera Angle Press the ANGLE button to switch angles subject to availability on the DVD Subtitles Press to choose a subtitle subject to availability on the DVD Zoom Press the P N button repeatedly for different zoomed views Menu Press the MENU buttons to return to the last used DVD submenu Title Menu Press the TITLE button to return to the main root DVD menu DVD MENU OPERATION In DVD Mode press the SETUP button on the remote control to access the Setup Menu Use the UP DOWN buttons to select a desired tab and the OK button to access the submenu Press the LEFT button to return to the previous menu To exit the Setup Menu press the SETUP button again The options available in the Setup Menu are described below Language Setup Select the Language tab in the Setup Menu to access this submenu Language OSD Language Subtitle d Video Audio DVD menu 0 Audio Rating Misc OSD Language Set a language for the Setu
29. or humidity or entry of liquids objects or creatures into the product 13 Noone is authorised to assume any liability on behalf of TEAC or impose any obligation on it in connection with the sale of any equipment other than as stated in this warranty and outlined above 14 TEAC reserves the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers retailers 15 LCD dead pixel policy please contact TEAC Customer Support Hotline on 1300 553 315 for assistance TABLE OF CONTENTS IMPORTANT SAFETY 8 1 ACCESSORIES 2 FRONT AND REAR PANEL OVERVIEW 3 CONNECTION 4 REMOTE CONTROL us Inserting Batteries ae Using Remote DOR 2 2 2 ca ace DVB DIGITAL TV 7 BASIC OPERATION AND 5 Initial Setup and Channel Tuning m Program Settings 7 1 Program 7 2 Electronic Program Guide 9 3 4 LCN Logical Channel Number Picture
30. p Menu and On Screen Display Subtitle Set the default subtitle language 18 MPEG4 Subtitle Set the MPEG4 subtitle encoding Audio Set the default built in audio language DVD Menu Set the default DVD menu language Note All DVD language features are subject to availability on the DVD used Video Setup Select the Video tab in the Setup Menu to access this submenu Aspect Ratio TV System 4 Video Video out Language Smart picture Audi HD Resolution Rating 77 Misc Aspect Ratio Set the picture s aspect ratio to 4 3 Letter Box 4 3 Pan Scan or 16 9 TV System Set the TV format to Auto PAL NTSC Video Out Set the video output format Smart picture Set picture display settings to Standard Bright Soft or Dynamic HD Resolution After you set the video output to HD output you can choose the resolution of HDMI output Notes As DVD picture aspect ratios are subject to the recorded disc format some DVDs may not display images correctly in the aspect ratio set on the Set Top Box If a disc recorded in 4 3 format is played on a wide screen TV black bars will appear on the left and right side of the screen Please adjust the video settings depending on the type of DVD and TV used Audio Setup Select the Audio tab in the Setup Menu to access this submenu Language Digital Output Down Sampling d Video Smart Sound 9 Audio Rating Misc Digital output Adjust the co
31. r Radio Channel 1 Select the channel to delete and then press the BLUE button A confirmation message will appear 2 Press OK to delete or EXIT to cancel the deletion 3 Repeat the previous steps to delete more channels Skip a TV or Radio Channel 1 Select the channel to be skipped and then press the GREEN button This channel is marked witha skip symbol and will be skipped during channel browsing 2 Repeat the previous step to skip more channels To unlist a channel as a skipped channel select that channel and press the GREEN button again Move a or Radio Channel 1 Select the channel to be moved and then press the RED button A move symbol will appear 2 Press UP DOWN to move the channel s position 3 Press OK to confirm the new position 4 Repeat the previous steps to move more channels Lock a Channel Restrict access to specific channels by setting a password lock 1 Select the preferred channel and then press the YELLOW button A lock symbol will appear and the channel is now locked 2 Repeat the previous steps to lock more channels remove a lock select the locked channel and press the YELLOW button again The current password is required to view locked programs The default password is 000000 If you have lost your password the Master unlock password is 888888 2 Electronic Program Guide EPG The EPG is an on screen TV guide that shows scheduled programs seven days in advance Press the
32. red when the device has been damaged in any way such as when the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the device the device has been exposed to rain or moisture does not operate normally or has been dropped 13 The AC power plug is used to disconnect the device completely from power and must be easily accessible at all times 14 The ventilation should not be impeded by covering the ventilation openings with items such as newspapers tablecloths curtains etc 15 No naked flame sources such as lighted candles should be placed on the device 16 Take notice of the environmental aspects of battery disposal 17 Use this device in moderate climates 18 The device shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the device WARNING To reduce the risk of fire or electric shock do not expose this device to rain or moisture WARNING Do not expose the batteries to excessive heat such as sunshine fire orthe like CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR This symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit This symbol indicates that this product uses double insulation between hazardous mains voltage and user accessible parts When servicing use only identical replacement parts Plug
33. s setting if the picture resolution does not appear to be correct This setting is to match the most common settings if a HDMI cord is used 480P for NTSC system TV 576i for PAL system TV 576P for PAL system TV 720P for NTSC or PAL system TV 1080i for NTSC or PAL system TV 3 TV format If the picture does not appear correctly you need to change the settings This should match the most common setting for TVs in your country NTSC for NTSC system TV PAL for PAL system TV Channel Search se Channel Search Australia First press the SETUP button Access the Channel Search menu by navigating to the Channel Search tab with the LEFT RIGHT buttons Press UP DOWN to select an option and press OK or RIGHT to adjust that setting Press the EXIT button to exit the Menu 10 Channel Search DTV 004 Radio 003 001 TVET 001 RNET 002122 002 003 24H TVE 003 004 CLAN TVE 1 Auto Search Automatically search for and save channels previously saved channels and channel settings will be overwritten 1 Select Auto Search and press OK or RIGHT to start the channel search 2 To cancel the channel search press EXIT Manual Search 2 Manual Search Add new channels manually with this option without changing the current channel list 1 Select Manual Search then press OK or RIGHT The channel search screen will appear 2 Press the RIGHT LEFT key to select the ch
34. stomer Support Hotline 1300 553 315 teacservicesupport awa com au www teac com au TE AC WARRANTY INFORMATION v1 5 2 DEC 2011 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Warranty Terms amp Conditions 1 TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill Maintenance and cleaning i e laser head is not covered by this warranty The TEAC warranty only applies to TEAC products purchased used and serviced in Australia 2 The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates being the Australian Consumer Law 3 Refund or replacement via your retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure Refund and exchange is not applicable for change of mind 4 Subject to the terms herein this warranty effectively covers the equipment as specified in the Warra
Download Pdf Manuals
Related Search