MobileDemand xTablet T1400 User`s Guide
Contents
1. OU OC Read block data 15014443 Read block data 150156593 Write block data 15014443 Write block data 15015693 Fear 35 xTablet T1400 User Guide xTablet T1400 Users Guide How to use the Skylight Connection Manager Application Setting up Mobile Broadband with the Skylight application amp GPS functionality with the MobileDemand xTablet T1400 Thank you for purchasing your MobileDemand xTablet T1400 with the mobile broadband GOBI module To use mobile broadband network connections with your MobileDemand xTablet T1400 you use the Sierra Wireless Skylight application called Skylight The Skylight application is already installed on your computer the icon is on your desktop You must set up the Skylight application before you can use your mobile broadband network To do so perform the following steps Step 1 Verify that WWAN Mode is enabled e N LL OU Ee OU OC Step 2 Start the Skylight application Step 3 Choose your Carrier in the Skylight application Step 4 Inserting your SIMM card Step 5 Connecting to the carrier Step 6 Set up xTablet GPS You do not need a mobile broadband account to use the MobileDemand xTablet s GPS feature Step One Verify that WWAN Mode is enabled a g ka E YIN ob leDemand Innovation everywhere Productivity anywhere vin aa B E wpa Ske Start up the xTablet T1400 Press the Home Key to bring u2. e Make sure that the distance between the two devices is within 10 meters and there are no walls or large obstructions between the devices e Make sure the both devices are turned on and configured to be discoverable e Make sure that both devices are compatible The GPS application cannot find my e f just starting the tablet from power off it location may take several minutes for signal to be acquired e Make sure that GPS is turned on in Hot Tab Make sure that GPS receiver and the location sensor are enabled in Control Panel e The xTablet T1400 may be out of coverage area Move your xTablet T1400 outdoors or closer to a window e Check if your surroundings have interference such as microwave ovens cordless phones Move the xTablet 11400 away from objects causing interference N LL OU ce OU am No sound is produced e Adjust volume of the xTablet T1400 by pressing on the volume rocker e If using an external audio device make sure that the cable is properly connected cannot project the xTablet T1400 e Make sure the HDMI driver is installed display to another monitor e Make sure the output setting selected is correct Barcode scanner does not emit light and e Make sure the Barcode scanner device is does not seem to work enabled in Hot Tab utility Barcode Scanner emits light but does e Adjust the distance between barcode not read barcode presented to it scanner of the device and the ba
3. Connections SMS Express Verizon Usage History Phone Book Display GPS S Activation Wizard gt Check for firmware update Help Topics Check For Updates Capture Diagnostic Information About 6 Click on the icon shown at the top and select Activation Wizard If you have an account with Verizon and you have a 4G 3FF Micro SIM installed it will activate 45 xTablet T1400 User Guide xTablet T1400 Users Guide Mechanical Drawings ast N LL OU Ee eb aas Front view of the xTablet T1400 46 xTablet T1400 User Guide a xTablet T1400 Users Guide obileDemand fs N LL OU Ee OU OC Side view of the xTablet T1400 47 xTablet T1400 User Guide Read Me First xTablet T1400 Users Guide Accessories The xTablet T1400 offers the following optional accessories for purchase Gigabit Ethernet Adapter e 30 pin extension port e Length 10 cm e Connector RJ45 female e Gigabit LAN 10 100 1000 Mbps High Capacity Battery e Capacity 7 4V 10600mAh 2S2P e Li Polymer Battery Auto Adapter e Rapidly charges your xTablet T1400 in your car while you drive e Length 3m Dual Pack Charger Two slot charger to charge any of the three different battery packs Two chargers can be daisy chained together Utilizes the same power supply as the one that is shipped with the tablet 2 Point Shoulder Strap e 2 Point shoulder strap provides another opt
4. Run the HotTab by clicking on the HOME button and this time select Setting 24 Setting PC Information BIOS Ver V121 EC Ver 121MDO1 HotTab Vor M101B_A40 1 19_MD OS Ver Units SN 1W 1450025043 MainBoard Ver xTablet T1400 Battery Information Main BackUp N 12 Medium BAT 1ChargeTime 5300 mA BAT 1CurrentCapacty 5042 mA BAT 1ChargeTime 2 5 h Then select Function 2 Function 2 O Short Press a Internet Explorer None Camera Volume Mute Calculator Then Select Short Press 25 xTablet T1400 Users Guide Mobil Function 2 O Short Press Internet Explorer None Camera Volume Mute Calculator Notepad BarCode Customize Q X fF Short Press Change the Select for F2 Short Press to Barcode O OU t oad dp O g Go to driver s folder C Drivers Folder Barcode MDScanner and run the MDScanWizard exe This wizard will launch 26 ViobileDemana scanner Wizara VVeage settings Please pick your scanner type Com port setup COM port to monitor eg COM1 1 15 Intermec Intermec settings only C Use Raw packet mode Use ISCP packet mode Driver Registry Location Startup Mode SET FIRST C Don t Start With Windows C Start with Windows this user only Start with Windows ALL users Play way file on scan BEEP WAV E Next Verify Intermec is the Scanner Type Verify the COM port is 15
5. 2 3 4 o 6 Disconnect any cords connected to the computer Turn the xTablet T1400 over back facing up Rotate the D Rings so they are out of the way for the battery to be removed Locate the Battery Lock and push it to the Unlocked position Locate the Battery Latch that is spring loaded Pull back and hold Lift the battery out using the opening on side of battery compartment Note if the hand strap is attached you will need to rotate the D rings out to remove the pack easily 5 xTablet T1400 User Guide xTablet T1400 Users Guide lobileDemand Hot Swapping Batteries The xTablet T1400 supports hot swapping of batteries meaning the tablet doesn t need to be powered off in order to replace the main battery The xTablet 11400 has a backup battery inside the tablet s main battery compartment that is charged by the main battery The backup battery cannot be removed except in service and needs to have adequate power for hot swapping of main battery to be done without issue When the backup battery is fully charged it can sustain up to 5 minutes of runtime so battery swapping needs to complete in under 5 minutes Perform the following to hot swap the batteries 1 While the tablet is powered on go to HotTab utility to check on the power level of the Backup battery 2 If the Backup battery level is at Low please charge the tablet with AC Power until the Backup battery level is at Medium or High
6. and do not remove the main battery a If you need to swap in this situation then shut down the tablet and then swap with a fully charged battery which will then begin charging your backup battery Note If you have used the xTablet 11400 for several hours and then put it to sleep for several days the main battery will be slowly depleted and may lose power all together If that happens your unsaved work will be lost and date time will need to be set when power is restored 3 Ifthe Backup battery level is at Medium or High continue to remove the main battery 4 Insert a new fully charged removable battery into the battery compartment following the instructions on page 9 of this manual 5 Go to HotTab utility to check if Main battery level can be correctly read If not check if the new battery is inserted properly 6 If the Main battery level can be read resume use the x Tablet T1400 O OU i a dp O OU g O OU a i dp O OU g xTablet T1400 Users Guide Connecting to Power Supply The xTablet T1400 operates either on external AC power or internal battery power It is recommended to use AC power for at least 6 hours when you start up the xTablet T1400 for the first time in order to fully charge the battery Use only the AC adapter included with your xTablet T1400 Using other AC adapters may damage the xTablet T1400 and the Battery Perform the following
7. electrolyte leakage generation of heat ignition or rupture may result When the Battery Pack Has Deteriorated Replace It with a New Battery Continued use of a damaged battery pack may result in heat generation ignition or battery rupture Do Not Use the Battery Pack With Any Other Products The battery pack is rechargeable and is only designed for this specific product If it is used with a product other than the specified product electrolyte leakage generation of heat ignition or rupture may result Do Not Use This Product With Battery Other Than the One Specified 91 xTablet T1400 User Guide xTablet T1400 Users Guide N General Product Safety This product should not be used near water such as bathtubs sinks swimming pools wet basement etc Do not block any ventilation openings Do not place the product against a wall or in an enclosed space as doing so might impede the flow of cooling air Do not place the product near any heat sources such as radiators warm air intakes stoves or other heat generating devices including amplifiers or other heat producing equipment Do not disregard the safety that a polarized or grounded connection can provide A polarized connection consists of two plugs one of which is larger than the other A grounded connection has two blades and a third one that is grounded If the main plug provided cannot be inserted into your outlet consult an electrician to replace your obsolete outl
8. xTablet T1400 Users Guide Mobil cl fs V LL OU Ee QU OU am 10 Install LTE Module the slot 11 Secure in place with retaining screw 43 xTablet T1400 User Guide xTablet T1400 Users Guide u Ww E eee u mn LE a L 12 Connect Antenna cable to antenna port labeled Main Take care to route cable so that it will not be pinched in the seals for the access hatch 13 Replace LTE Module cover 44 xTablet T1400 User Guide xTablet T1400 Users Guide IobileDen Step Five Connecting to your carrier Now that your 3FF Micro SIM is installed and it is associated with your carrier you can connect with your carrier Power on the xTablet T1400 3 Click Connect to connect to the carrier If this is the first time you have connected there will be an automatic activation in the back ground no Pa Skylight Verizon Verizon 3 27KB 7 67KB Eo N LL OU Ee OU am A Fe SIERRA SIERRA WIRELESS WIRELESS 4 You are now connected to your carrier To disconnect from your carrier press Disconnect 5 Note about Carrier Activation When switching from one carrier to another the automatic activation may not come up because the software is under the impression the GOBI module is already activated Follow these steps if you want to run the Automatic Activation Wizard manually with your carrier Always On Top Enable Airplane Mode Options
9. Verify Use ISCP Packet Mode is selected Verify Start with Windows All Users is selected Click on Next 27 Ga xTablet T1400 Users Guide lobileDemand Innovation everywhere Productivity anywhere Make sure these items are selected Thanks for running the Scanner Driver configuration Wizard For Tech Support please call 319 363 4121 v Restart Scanner Driver now to make changes take effect Do not wedge scanned data Send Registered message and E COST e T OUEL Windows Event and write scanned data to registry key CUESTA Gata H KCU Software MobileDemand MDScannerDriver LastScan Ee OU Es p gt aad dp O eb Oo Back EINISH Click on Finish Note IF you are an AB customer and use the registry to pull scan data click the lower right hand selection then click on Finish fag O hi Make sure you see this on the toolbar You will have to wait for the MDScanWizard application to start and go down to the toolbar There are two barcodes that need to be scanned to place the scanner in PULSE mode and to put in a 5 second timeout Print out the barcodes and scan them in The two codes to scan are in an XPS document included in the directory Test the scanner 28 Setting up the RFID Reader To enable the built in HF RFID Reader perform the following scenarios 1 Open HotTab utility by pressing Menu Button located on the front panel OR Launching HotTab Utilit
10. antenna is used for GPS Built in GPS antenna is used for GPS er ee Antenna This Hot Tab menu option provides users information such as PC Information Battery status and also device settings such as power management and function key mappings PC and Battery This section provides user PC and battery EN Information Information Setting O Main Battery The main battery Icon displays the battery level in PC Information meee percentages 0 to 100 END Backup Battery de Ds The backup battery used for battery hot swapping dep ays its in Uei win state in text with the following meanings Umts SN 1W1450001615 peer er is fully charged and can be used for hot swap Dino MainBoard Ver x Tablet 11400 Battery Information Main BackUp pr a but can be used for hot swapping swapping is not recommended 94 High BAT ICurrentCapacity 10180 mA BATIChargeTime 0 9 h Battery Charge Time The Battery Information also displays estimated time needed to fully charge the main battery when AC adapter is plugged in Battery Current Capacity This value displays the Battery Gauge Capacity Value in Milli Amp Hours As the battery ages this number will decrease 15 xTablet T1400 Users Guide MobileDemand Function Key Mapping The function key mapping menu option allows user to change the physical function buttons Fn1 and Fn2 Users can change J J what application will be launched with short press or
11. gt IobileDemand Innovation everywhere Productivity anywhere Read Me First Getting Started O E the O joes i 5 Gem O N MobileDemand xTablet T1400 User s Guide Troubleshooting Please read these instructions carefully before using this product and save this manual for future use MobileDemand LC 1501 Boyson Square Drive Suite 101 Hiawatha IA 52233 U S A Phone 877 784 4338 Fax 319 363 4122 Web www RuggedTabletPC com No parts of this work may be reproduced in any form or by any means graphic electronic or mechanical including photocopying recording taping or information storage and retrieval systems without the written permission of the publisher Read Me First While every precaution has been taken in the preparation of this document the publisher and the author assume no responsibility for errors or omissions or for damages resulting from the use of information contained in this document or from the use of programs and source code that may accompany it In no event shall the publisher and the author be liable for any loss of profit or any other commercial damage caused or alleged to have been caused directly or indirectly by this document 2009 2014 MobileDemand LC Products that are referred to in this document may be either trademarks and or registered trademarks of the respective owners The publisher and the author make no claim to these trademarks O O
12. to connect the xTablet T1400 to AC Power On the side of the xTablet T1400 lift the I O protective cover by pulling on the latch Plug the DC cord of the AC adapter into the Power Jack of the xTablet T1400 Plug the AC power cord into the AC adapter Finally Plug the AC power cord into the electrical outlet a a When the AC Adapter is connected the battery pack will start charging The battery LED indicator on the xTablet 11400 will show the different charging states Please refer to the Battery LED section of this document xTablet T1400 User Guide xTablet T1400 Users Guide lobileDema i Turning On Off Press and hold the power switch for 5 seconds until the blue LED power indicator lights up Note e Do not press the power switch repeatedly e Do not perform the following operations until the hard drive indicator turns off o Connecting or disconnecting the AC adapter o Pressing the power switch o Touching the tablet buttons screen or external keyboard mouse Turning Off Perform the following procedure to shut down the xTablet T1400 1 Make sure you have closed any programs that are open on the Desktop Start Screen apps don t need to be closed 2 Running Windows 8 1 Open the Charms Bar by swiping your finger from the far right of the screen towards the middle of the screen Tap on the Settings charm Tap on Power Tap on Shut Down Wait for xTablet T1400 to power off If running Wind
13. will need to purchase a 3FF Micro SIM from Verizon and associate the SIM number to your business account Then follow the steps below to insert the SIM into the system b Sprint You will need to purchase a 3FF Micro SIM from Sprint and associate the SIM number to your business account Then follow the steps below to insert the SIM into the system c AT amp T You will need to purchase a 3FF Micro SIM from AT amp T and associate the SIM number to your business account Then follow the steps below to insert the SIM into the system d T Mobile You will need to purchase a 3FF Micro SIM from T Mobile and associate the SIM number to your business account Then follow the steps below to insert the SIM into the system Step Three Installing your LTE SIM Shut down Windows and turn the power off Turn the unit over onto its back to get to the cover that holds the LTE Module and the Micro SIM sjm N LL g Remove the battery from the unit as shown below am m IN xTablet T1400 User Guide GER xTablet T1400 Users Guide Demand Innovation everywhere Productivity anywhere 6 7 Gently press the Micro SIM into the slot with your finger 41 xTablet T1400 User Guide xTablet T1400 Users Guide A ve 8 Once the Micro SIM is fully seated you will feel it click and lock into place 9 Remove Antenna cable from retaining socket and retaining screw from threaded insert 42 xTablet T1400 User Guide
14. 200 2592 Pictures will be saved at resolution of 2592 x 1944 dE Exits the Camera and hides the HotTab Utility 6 Picture Video m Switches between pi Em picture taking and video Shutter Record automatically cen Camera Shutter Button Tap to take picture switch base on mode nm Video Record Button Tap to Start and press again to stop recording pi Opens the location where pictures and videos are al da saved in a window 13 8 Open Saved Location Ga xTablet T1400 Users Guide Mobil Demand Innovation everywhere Productivity anywhere Device This Hot Tab menu option enables disables xTablet 11400 s hardware functions Wi Fi is enabled Wi Fi disabled WWAN 3G 4G is enabled WWAN 3G 4G is disabled GPS is enabled GPS is disabled Bluetooth is enabled Bluetooth is disabled Camera is enabled Camera is disabled Enables Front LED indicators Disables Front LED indicators Bande Barcode Reader is enabled Reading will need to 9 be triggered manually thru Fn button Barcode Reader is disabled Grane RFID Reader is enabled Reading will occur 9 without trigger FID RFID Reader is disabled Orange When clicked the RFID Settings Dialog box will O g come up RFID Setting No RFID settings dialog will not come up Orange o Expansion Port 5V Power is enabled O OU Ee t dp O Cc eb g Expansion Port 5V Power is disabled External GPS
15. 210 Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Canada avis d Industry Canada IC Cet appareil numerique de classe B est conforme aux normes canadiennes ICES 003 et RSS 210 son fonctionnement est soumis aux deux conditions suivantes 1 cet appareil ne doit pas causer d interf rence et 2 cet appareil doit accepter toute interference notamment les interferences qui peuvent affecter son fonctionnement Informations concernant l exposition aux fr quences radio RF La puissance de sortie mise par l appareil de sans fil est inf rieure a la limite d exposition aux fr quences radio d Industry Canada IC Utilisez l appareil de sans fil de fa on a minimiser les contacts humains lors du fonctionnement normal Ce peripherique a ete evalue et demontre conforme aux limites SAR Specific Absorption Rate Taux d absorption sp cifique d lC lorsqu il est installe dans des produits h tes particuliers qui fonctionnent dans des conditions d exposition a des appareils portables 802 11 Radio Precaution Statement Caution Users are responsible for configuring the channels of operation that comply with their country regulatory standards A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual C
16. All Control Panel Items Display Screen Resolution v Search Control P P Change the appearance of your display Display 1 Mobile PC Display Resolution 1920 x 1200 Recommended Y E Orientation High 1920 x 1200 Recommended Allow the scree Advanced settings 1680 x 1050 Project to a second Make text and othe What display settin 1440 x 900 Cancel Apply 1280 x 800 Ee OU Ee Ban v O C eb O 1024 x 768 3 Hit Apply A prompt Display Settings prompt will show up to ask the user if the applied resolution is usable 4 If the new resolution is the desired display setting hit Keep changes and continue to next step If the new resolution is not desirable hit Revert and select a different resolution to change to and start again from step 2 5 The user may now use the device with the new resolution setting 22 Setting up the Barcode Scanner This configuration should be completed prior to shipment If for some reason scanning is not functioning correctly please go through the following steps starting with opening Windows a Shortcuts o Run the HotTab icon on the desktop or press the HotTab button select Devices Devices GPS Antenna Light Sensor Make sure BarCode is Orange hit the X to exit this HotTab section 23 xTablet T1400 Users Guide Mobil Dema O OU od i dp O OU g
17. Captures images and videos 18 Camera Flash LED flash to for the camera 19 Expansion Connectivity to custom Contacts modules USB2 0 and RS232 signals 20 Fn2 Button Programmable function key configured by HotTab Utility Default camera 21 Volume Volume Control Buttons increase volume decrease volume 22 Battery Lock Lock the battery in place once battery is inserted Not spring loaded 23 Battery Latch Spring loaded slider that latches the battery in 24 Stylus Holder Stylus holder with tether Slot 25 LTE Module amp Service window to insert SIM card slot Micro SIM card Also provide access to LTE Module 26 Speakers Audio and audible alerts Getting Started Getting Started xTablet T1400 Users Guide First time Operation Inserting Battery Pack To insert the included standard battery pack into the x Tablet T1400 1 2 3 Disconnect any cords connected to the xTablet T1400 Turn the xTablet T1400 over back facing up Rotate the D Rings so they are out of the way for the battery to be removed Locate the Battery Lock and push it to the Unlocked position Insert the battery on the connector pins side first and then lower the battery into the battery compartment until you hear the latch click Make sure the edges of the battery are flat against the housing once fully inserted Then move the D rings back into place Removing the Battery Pack 1
18. U E i a dp O OU g MobileDemand is a registered trademark of MobileDemand LC MobileDemand logos are registered trademarks of MobileDemand LC Windows is a trademark of the Microsoft group of companies The Bluetooth word mark and logo are registered trademarks and are owned by the Bluetooth SIG Inc Useful Information Troubleshooting x Q Q lt Please read these instructions carefully before using this product and save this manual for future use Contents Chapter 1 Getting Started 1 Unpacking 1 Description Of Parts 2 First time Operation 5 Hot Swapping Batteries 6 Turning On Off 8 Chapter 2 Useful Information 9 CTRL Alt Delete Operation 9 How to Enter BIOS 9 Battery Status LED s 10 E HotT ab Operation 10 G Camera 12 z HotTab Devices 14 HotTab Setting Menu 15 O Auto Screen Rotate Enable Disable 17 Tech Tip Password required on wake setting 18 Tech Tip High Resolution Screen Scaling 19 Tech Tip Chaning screen resolution 21 Setting up the Barcode Scanner 23 Setting up the RFID Reader 30 How to use the LTE Skylight Connection Mgr Software 36 How to install LTE SIM 40 Mechanical Drawings 46 Accessories 48 Chapter 3 Troubleshooting 49 Troubleshooting Basic 49 Chapter 4 Safety Informaiton 51 Precaution on Battery Pack 51 General Product Safety 52 Handling and Maintenance 52 General Guideline 53 Cleaning Guideline 53 Touchscreen Guideline 53 Regulator
19. ap on the button of any saved slot to remove alx 2 Shortcut will be removed and once again show A Empty to indicate slot is empty alx alx alx alx Tap on the button will hide the HotTab Utility Menu 4 a a a a a 11 N xTablet T1400 Users Guide MobileDemand Innovation everywhere Productivity anywhere Camera To activate the Camera App the default is the front Fn1 Button To change use the setting menu This Hot Tab menu option allows users take a picture or record TERN a video Before m AY use make sure ler N the Camera is turned on under Devices menu option The Camera user interface will take up the entire screen as shown jy ei below NY SR O OU od Ban N O eb 12 Description of Camera User Interface Buttons You can get to these settings by selecting this icon from the HotTab menu No Item 1 Camera Switch as Settings KY Description Switch between front and rear cameras Available Settings e Picture Save modify inspect saved location for pictures e Video Save Folder modify inspect saved location for video recordings e Picture Quality Picture compression quality gpa BD ee Pictures will be saved at resolution of 1024 x 768 N Flash Control e ee S 4 Resolution O a o if Pictures will be saved at resolution of 1600 x 1
20. aution 802 11a wireless LAN 5 15 to 5 25 GHz 5 GHz radio channels 34 to 48 is restricted to indoor operations to reduce harmful interference to co channel Mobile Satellite System MSS operations Co pyrig Atcopyrig hto 2014 All rights reserved No part of this user manual may be transmitted stored in a retrieval system or translated into any language or computer language in any form or by any means without the prior written permission of the manufacturer Information is subject to change without prior notice Contact Information Sales 319 363 4121 Service 1 855 501 TECH 8324 99
21. dows user interface icons buttons and other user interface elements may be too small to read and operate at the default Windows settings By changing the display scaling or the display resolution setting of the device you can adjust the size of the text and other items on the desktop for optimal viewing Display scaling is the recommended method because it has the effect of adjusting user interface without having to move away from the optimal resolution setting at 1920 x 1200 This section will explain how you can adjust the built in windows display scaling setting and resolution setting Note e xTablet 11400 is shipped with display scaling set at Larger 150 We recommend the users set the scaling to this setting for optimal navigation and viewing e Before proceeding to change the scaling option make sure any opened document is saved then close and all running applications are closed before proceeding to change the display scaling because this procedure requires users to log out of their account to apply display scaling change lay scaling setting Recommended Perform the following to change display scaling setting 1 Tap and hold anywhere on the desktop for 3 seconds and release to bring up the context menu and select Screen resolution option as shown below View Sort by Refresh Paste Paste shortcut Undo New Ctrl Z inte Graphics Properties e Graphics Options New gt Eg Screen resolution ee Perso
22. e characters are typed click on Set to save the settings Settings V Sound Data Output Display data on UI e 0 Emulate keyboard input Eo N LL OU Ee OU OC RFID Output Setting Select RFID OxPut Type Read UID in 33 xTablet T1400 User Guide xTablet T1400 Users Guide Sound The SOUND check box defines whether a beep sound will come with the data scanning Data Output Display data on Ul This option is to copy the scanned data to another UI in this PC Emulate keyboard input Eo N LL OU Ee OU OC The default setting for Data Output is EMULATE KEYBOARD INPUT Under this setting the HF RFID Reader will simulate the scanning behavior as a keyboard input and automatically paste the data scanned to the field where the cursor index V Sound Data Output Display data on UI 0 Emulate keyboard input RFID Output Setting Select RFID OutPut Type Read UID 34 xTablet T1400 User Guide xTablet T1400 Users Guide RFID Output Setting The default setting for built in HF RFID Reader is to READ UID only For some applications user might need to read or write further block data the drop down menu under this section can do this change Settings Sound Data Output C Display data on UI e 6 Emulate keyboard input RFID Output Setting Select RFID OutPut Type Read UID v Read UID Eo N LL OU Ee
23. e password to not prompt when the system awakes from sleep it still asks for apassword This causes users extra time to put in a password In Desktop Mode press and hold your finger on the Windows Start Logo in the bottom left corner of the tablet Programs and Features Network Connections Power Options Event Viewer System Device Manager Disk Management Computer Management Command Prompt Command Prompt Admin Task Manager Control Panel Windows Explorer Search Run Ee OU od Ban v O eb Desktop Select the Control Panel Once in Control Panel select User Accounts v 4 82 gt Control Panel All Control Panel Items User Accounts Control Panel Home Make changes to your user account Select Reset Security Policies Manage your credentials i Make changes to my account in PC settings Create a password reset disk Manage your file encryption D Change your account name certificates D Change your account type Configure advanced user ER Now your seitings will take affect that fe Change User Account Control settings you have set in Power Management Reset Security Policies for the Password not being required on wake from sleep Change my environment fe Manage another account variables 18 High Resolution Screen Scaling and Setting The xTablet T1400 s 1920 x 1200 high resolution display is perfect for viewing image video or other applications however Win
24. e touchscreen function your touch does not correlate to the proper location on the screen recalibrate the touchscreen 53 xTablet T1400 User Guide Read Me First Regulatory Safety Statements FCC Digital Emissions Compliance This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the radio or television receiving antenna Increase the separation between the computer equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected Consult the dealer or an experienced radio television technician for help Canadian Digital Apparatus Compliance This Class B digital apparatus complies with Canadian ICES 003 and RSS
25. ect to a second screen Larger 150 Adjust ClearType text Custom sizing options Change only the text size Instead of changing the size of everything on the desktop change only the text size for a specific item pol See also Personalization Devices and Printers 4 A prompt may show up to ask if you want to sign out to apply the scaling change Hit Sign out Now to apply changes as shown below A You must sign out of your computer to apply these changes u Save any open files and close all programs before you sign out Sign out later 5 The user may now login again to Windows to see the changed display scaling already being applied Changing screen resolution setting Alternatively instead of changing the display scaling setting user may choose to change the overall resolution setting to make screen elements bigger 1 Tap and hold anywhere on the desktop for 3 seconds and release to bring up the context menu and select Screen resolution option as shown below View Sort by Refresh Paste Paste shortcut Undo New Ctrl Z Graphics Properties Graphics Options New BS Screen resolution E Personalize 21 N xTablet T1400 Users Guide lobileDemand Innovation everywhere Productivity anywhere 2 Click on the dropdown option next to Resolution and select the desire resolution by tapping on the scale kej Screen Resolution 0 4 2
26. ented with a drop down list of carriers Verizon Wireless 3 Select your carrier from the list of carriers Verizon Wireless Bell Telus Rogers Aeris AT amp T Sprint Generic 4 You should choose Generic for T Mobile in the USA 38 xTablet T1400 User Guide xTablet T1400 Users Guide lobileDen Verizon Wireless 5 For this example we will change from Sprint to Verizon Wireless network Highlight Verizon Wireless and hit OK Pa Skylight Eo N LL OU Ee OU am Updating firmware Click here for hel fA t SIERRA WIRELESS 6 Thefirmware will be updated Configuring mobile broadband device 42 complete Do not shut down or restart Windows 7 This progress message will show down at the lower right hand corner of Windows Pa Skylight This will come up once the firmware on your LTE module has been updated to your carrier This is letting you know it is ok to connect Make sure you read below about instructions on how to add your 3FF Micro SIM from your carrier to the xTablet T1400 ES pos SIERRA WIRELESS 39 xTablet T1400 User Guide xTablet T1400 Users Guide 8 The next thing you must do is register your radio module information with a carrier and get a SIM card Here are the steps to follow for that 9 Turn off the tablet to install the 3FF Micro SIM card Follow the instructions below on inserting the 3FF Micro SIM card a Verizon You
27. et Eo N LL OU Ee OU OC Protect the power cord from being crushed or pinched particularly in the area of the plugs any receptacles used and the point of exit from the apparatus Do not break off the ground pin of the power cord Use only accessories specified by the manufacturer Use only with its transport carriage stand tripod console or table specified by the manufacturer or sold with the product When using a carriage move the carriage assembly with the product carefully to avoid damage from falling over Unplug this apparatus during lightning storms Refer all servicing to qualified service personnel A technical intervention is required when the apparatus has been damaged in any way for example if the power cord or plug is damaged liquid has been spilled or objects have fallen inside the unit if the product has been exposed to rain or moisture if it does not operate normally or if it has been dropped and cracked broken Handling and Maintenance Follow and adhere to all warnings and instructions in this manual For you re the longevity of the product usage please read all operating instructions before using the product Keep this manual for future reference 52 xTablet T1400 User Guide N xTablet T1400 Users Guide obileDemand N General Guideline Keep the product at least 13 cm 5 inches away from electrical appliances that can generate a strong magnetic field such as TV refrigerator mo
28. ion for carrying the tablet 4 Point Shoulder Straps e 4 Point shoulder strap provides another option for carrying the tablet but also for hands free operation Barcode Scanner e High performance 2D imager e Reads linear stacked linear and matrix barcodes xTablet T1400 User Guide RS232 Ethernet Adapter e 30 pin extension port e Length 10 cm e Connector DB9 Serial RS232 Cable female Hand Strap e Ergonomic hand strap can help you hold the xTablet T1400 much more easily and comfortably Vehicle Dock e Safe storage charging and communications while operating a vehicle 4 USB Ethernet RS232 Built in power converter up to 36 VDC Other power converters up to 100VDC Optional Keyboard Mounting Kit Large Stylus Kit e Larger and more rugged stylus for intensive use Rugged metal mesh tip 5 5 stylus 16 tether Side stylus holder Standard Capacity Battery Pack e 39 22 Watt Hours e 4 5 Hours of operation Long Life Battery Pack e 78 44 Watt Hours e 8 11 Hours of operation XL Capacity Battery Pack e 109 Watt Hours e 10 12 Hours of operation RFID Reader RFID 13 56 Mhz 1 2 read distance ISO 15693 R W TI HF I Plus TI HF I Pro T HF Standard I Code SLIISO 14443 A R W Mifare_One S50 Mifare_One S70 EN xTablet T1400 Users Guide MobileDemand Chapter 3 Troubleshooting Troubleshooting Basic Problem Solution The removable battery is not charging Make sure the AC adapter is p
29. long press Function 1 Function 2 of keys Function 1 O Short Press Preset Selectons Internet Explorer Media Player Camera Volume Mute Calculator Notepad BarCode Customize ax 16 O OU od i dp O em OU g Auto Screen Rotation or Lock Screen Rotation Windows 8 1 has the ability to rotate the screen when you physically rotate the tablet However the UI aspect resolution is not always desirable switching from Portrait to Landscape position on your screen Here are instructions on how to enable or disable this Windows feature Option 1 Right click on the desktop and chose Screen Resolution To Allow Uncheck the box that states Allow the screen to auto rotate To Disable Check the box that states Allow the screen to auto rotate Option 2 Swipe the right side of the tablet screen to bring up the Windows 8 1 Charms Bar Now click Settings Share Devices O Settings FEAN Once in Settings Click Screen Change PC settings Just above the brightness control there will be this small icon Click it to show this and you will enable Auto Rotate Click it again it will show a lock and this will disable Auto Rotate N xTablet T1400 Users Guide MobileDemand Innovation everywhere Productivity anywhere Tech Tip I don t want Windows to ask for my password when wake my tablet from sleep We have noticed that even when we set th
30. nalize 19 N xTablet T1400 Users Guide lobileDemand Innovation everywhere Productivity anywhere 2 A Screen Resolution Window will show up Select the Make text and other items larger or smaller option in the window as shown below Screen Resolutior i gt gt SS 2P M E AllControl Panel Items gt Display Screen Resolution vi Search Control P 2 Change the appearance of your display Display 1 Mobile PC Display Resolution 1920 x 1200 Recommended Y Allow the screen to auto rotate Advanced settings Project to a second screen or press the Windows logo key HH P Make text and other items larger or smaller What display settings should choose 3 A Display window will show up Under Change the size of all items section change the scaling option to Larger 150 or any other desired display scaling and hit Apply to save changes as shown below Ee OU Ee Ban v O C eb fa izd bi 4 Control Panel All Control Panel Items Display YG Search Control P Control Panel Home a Change the size of all items Adjust resolution You can make text and other items on the desktop bigger by choosing one of these options To temporarily enlarge just part of the screen use the Magnifier tool Adjust brightness Calibrate color 3 Smaller 100 default Change display settings O Medium 125 Proj
31. ncy from the drop down menu shown as below The frequency can be from 1 second to 9 seconds Settings Sound is on UI O 6 Emulate keyboard input 31 xTablet T1400 Users Guide Single Scan User can also define the RFID Reader scanning as SINGLE SCAN Under this setting the RFID Reader will be triggered only when the user clicks on Send RFS21Scan V1 00 RF 521 Settings Auto Scan Prefox Text Sound 6 Single Scan Data Output pnd Suffix Text Read time options Display data on UI e 1 seconds v e mi Erlernewine 6 Emulate keyboard input Se LL RFID Output Setting Select RFID OutPut Type Read UID v cc AN DMA 001 Demand i amog Demo Equipment RFID Antenna capon 501 Boyson Sq Dr Ste 101 Hiawatha IA 52233 1 2 Reading distance 319 363 412 www Ru agedTabletPC com Protected by one or more of US Patents 7 997 819 8 144 456 Note The RFID scanner Antenna is located here on the back side of the tablet The reading distance is 1 2 32 xTablet T1400 User Guide EN xTablet T1400 Users Guide lobileDemand Innovation everywhere Productivity anywhere Prefix Suffix Prefix User can type in this field to define the characters BEFORE the data scanned After the characters are typed click on Set to save the settings Suffix User can type in this field to define the characters AFTER the data scanned After th
32. ow like this Tablet Plugged In turned OFF Tablet Unplugged Turned OFF none HotTab Operation HotTab provides quick access to the tablet s functions and features such as turning on off WiFi Oo Bluetooth GPS programming function keys and changing power management e As Windows starts up HotTab starts and runs in the background To display the HotTab control utility press the O Menu Button located on the front panel OR launch the HotTab Utility application E Menu Button on the Front HotTab Utility Icon Panel tl Hotlab HotTab is designed to be a quick access utility therefore the main user interface will be on the right side of the screen without blocking the content on screen There are 4 main menu options Short cut Camera Device and Settings Hot Tab Utility Interface a LJ oia mn NohileDemand Innovation everywhere Productivity anywhere FROH z 0 wi adi Ske The HotTab menu option allows users to configure short cuts to quickly access programs with a few taps The Shortcuts menu offers 8 empty slots Shortcuts can be mapped to any executable files exe installed on the tablet Short Cut Menu To store a new shortcut 1 Tap on button of any empty slot Shortcuts O 2 An on screen file browser will appear 3 Browse to find the desired application to have shortcut Cub 4 Click Open to save the shortcut ub To remove an saved shortcut 1 T
33. ows 7 tap on the start button and select Shut Down O OU s i nie dp O OU g NO oR W Note e The computer will forcibly be turned off if the power switch is pressed and held for six seconds or longer e Leaving the tablet in sleep for several days on low batteries could cause the T1400 to drain all power in the main pack and backup battery which will turn off the tablet losing unsaved work and date time settings Chapter 3 Useful Information CTRL ALT DELETE Operation To produce a Cirl Alt Delete press and hold both Volume Keys down at the same time Boot Menu To boot from a USB stick for example you have two options 1 When powering on the tablet Press F7 using a regular keyboard 2 When powering on the tablet Press the Fn1 key on the front of the tablet How to Enter the BIOS To enter the BIOS follow these steps 1 Turn on the tablet 2 Start pressing the Fn1 key repeatedly right away 3 Chose BIOS Menu from the Boot Options 4 Once in the BIOS use these keys to navigate the BIOS menu a 0295 Fn2 ESCAPE Home button and volume Right Arrow Home button and volume Left Arrow Volume Up Arrow Volume Down Arrow N xTablet T1400 Users Guide MobileDemand Innovation everywhere Productivity anywhere Battery Status LED s Based on your battery level and if your tablet is in normal operation sleeping or powered off and charging your LED lights will sh
34. p the HotTab application You will see this menu pop up Press Devices Verify that this icon is ORANGE This verifies that your WWAN radio module is enabled 36 xTablet T1400 User Guide xTablet T1400 Users Guide Mobil EI Step Two Start the Skylight application You start the Skylight application from the icon on the Desktop of Windows To start the Skylight application 1 Tap Start gt Desktop Skylight The Skylight application window opens and the icon appears in the Windows notification area for example mich 4 52 PM Eo N LL OU Ee OU am i 11 40 PM Note If you do not see the m icon click the arrow next to the notification area to view additional icons Step Three Choose your carrier in the Skylight application Before you can use the mobile broadband installed on your tablet you need to set up the Skylight application with the information about your mobile broadband network carrier 1 In the Skylight application Window click on the icon of the wrench Pa Skylight SIERRA WIRELESS 3 xTablet T1400 User Guide xTablet T1400 Users Guide User Options 3 General Messaging Mobile Broadband Device Customization Network Selection Network Operator SIM Settings Sprint Mobile IP Profiles Data Usage Tracking PET Firmware Image Selection Eo N LL OU O q OU am 2 Click on Network Operator and you will be pres
35. rcode being scanned e Make sure the barcode code type is enabled in the tablet To enable disable a specific barcode code type go through the Barcode Scanner Configuration section e Clean the scanner lens with a damp clean cloth 50 xTablet T1400 User Guide a xTablet T1400 Users Guide obileDemand Chapter 4 Safety Information Follow and adhere to all warnings and instructions in this manual For your safety please read all safety and operating instructions before using the product Keep this manual for future reference N Precaution on Battery Pack Do Not Expose the Battery Pack to Excessive Heat or Extreme Heat Near a Fire in Direct Sunlight for example Generation of heat ignition or rupture may result Do Not Disassemble Modify or Insert Sharp Objects Into the Battery Pack Electrolyte leakage generation of heat ignition or rupture may result Read Me First Do Not Short the Positive and Negative Terminals of the Battery Generation of heat ignition or rupture may result When carrying or storing the device do not place the battery pack together with articles that may contact electricity Do Not Drop or Apply Strong Pressure to the Battery Electrolyte leakage generation of heat ignition or rupture of battery may occur Do Not Charge the Battery Other Than with the Products Specified In This Manual If the battery is not charged using one of the specified products and methods
36. roperly connected and that the removable battery is properly inserted Verify in HotTab Nothing appears on the screen The xTablet T1400 may be in sleep mode indicated by blinking green indicator light Press the power button to wake up the display The brightness level may be too low Increase brightness Verify by shading the screen Read Me First The screen suddenly turns blank and the Make sure that LED indicator is not turned power indicator goes off off in Hot Tab Make sure the AC adapter is properly connected If running on battery power the battery may be depleted charge the battery Wireless LAN signal quality is poor The xTablet T1400 may be out of range Move the xTablet T1400 closer to the access point or another wireless LAN device associated with it Check if your surroundings have interferences such as microwave ovens cordless phones Move the xTablet T1400 away from objects causing interference cannot connect to another wireless Make sure that wireless LAN feature is LAN device turned on Make sure that the SSID setting is the same for every wireless LAN device in the network Restart the xTablet T1400 Make sure the IP address or subnet mask setting is correct cannot connect to another device with Make sure that both devices have Bluetooth Bluetooth turned on For the xTablet T1400 check Hot Tab to see if Bluetooth is turned on xTablet T1400 User Guide xTablet T1400 Users Guide
37. tor or a large audio speaker Do not place heavy objects on top of the xTablet T1400 as this may damage the display The screen surface can be scratched Do not use paper towels to clean the display It is best to use a touch screen cleaning cloth Avoid touching it with a pen or pencil To maximize the life of the backlight in the display allow backlight to automatically turn off as a result of power management Avoid using a screen saver or other software that prevents the power management from working N Cleaning Guideline Use a soft cloth moistened with water or a non alkaline detergent to wipe the exterior of the product Gently wipe the display with a soft lint free cloth Do not use alcohol or detergent on the product N Touchscreen Guideline Use your finger or the stylus on the display Using sharp or metallic object may cause scratches and damage the display thereby causing errors Use a soft cloth to remove dirt on the display The touchscreen surface has a special protective coating that prevents dirt from sticking to it Not using a soft cloth may cause damage to the special protective coating on the touchscreen surface To clean off hard to remove dirt blow some steam on the particular area and gently wipe away using a soft cloth Do not use excessive force on the display Avoid placing objects on top of the display as this may cause the glass to break When there is a noticeable discrepancy in the operation of th
38. ttery is fully charged when AC adapter is plugged in Blue Tablet is ON Side I O No light Tablet is OFF 3 Touch Screen Display and multi touch act as one of the inputs 4 Fni Button Programmable function No Item Description 7 I O Cover Protects I O ports 8 Micro HDMI HDMI output to external HDMI displa 9 LAN RS232 Adapter port for a LAN or RS232 connection with cable 10 USB3 0 High speed USB port connects to USB devices such as a USB flash drive mouse keyboard orinter etc 11 Mic In Line Headset or Out headphone can be connected 12 Power Jack DC IN power input jack 13 Micro SD Memory card reader Card Reader port for Micro SD Card Getting Started Power ly key configured by HotTab Utility Default Web Browser xTablet T1400 Users Guide O O O co ly Docking Contacts Rear Buttons Battery Lock 0 0 00000 C OO 22 BAW O Expansion Port 00 00000 QO oo 00000 O oC O OU rifa i dp O OU g xTablet T1400 User Guide xTablet T1400 Users Guide Mobiled No Item Description Description 14 Kensington Kensington Lock access 27 Docking Docking contacts for Lock detail Contacts office and vehicle 15 Optional Barcode Imager for docks to provide Barcode reading 1D 2D barcodes power and external 16 Optional RFID RFID reader for reading of GPS antenna 13 56MHz RFID tags 17 Rear Camera 5MP autofocus camera Bottom
39. y Safety Statements 54 Copyright 55 Contact information 55 xTablet T1400 User Guide Chapter 1 Getting Started Congratulations on purchasing the xTablet 11400 The rugged design allows you to use it in harsh outdoor environments This chapter tells you step by step how to get the computer up and running You will find instructions for the following procedures e Unpacking e Description of Parts e First Time Operations e Turning On Off Read Me First Unpacking Check and identify the supplied accessories oO f 7 e xTablet T1400 with Screen Protector e Standard Long Life or Extra Long Life Battery OU e Power Adapter e Power Cord O e Capacitive Stylus and Tether e Briefcase Handle Q J dizem O joes em OU 2 m Troubleshooting Appendix Please read these instructions carefully before using this product and save this manual for future use xTablet T1400 Users Guide lobileDemand Description of Parts Front Right III N Item Description o 2 LED Indicators Show the current status of the xTablet 11400 RF E Green a WiFi BT 3G GPS ON No light WiFi BT 3G GPS are OFF Green Hard drive Activity No light Hard drive Idling Battery a Orange Charging in progress Green Battery in use Blinking Red Battery removed while tablet ON Solid Red Low Battery lt 10 Not lit Ba
40. y application 2 Tap on Device button 3 Check the status color of the RFID icon Orange RFID Reader is enabled Reading will occur without trigger RFID Reader is disabled 4 lf the RFID Reader feature is disabled white tap on the RFID icon to enable it Orange 29 N xTablet T1400 Users Guide Mobil Demand vation everywhere Productivity anywhere 5 Open the application where RFID reader will input have a HF RFID tag close to the RFID antenna and the data will be read and shown on the indexed field RFID Reader Support Transponder 15015693 ISO14443A 15018092 RF Transmit Frequency 13 56MHz How to setup RFID Reader To setup the built in HF RFID Reader perform the following scenarios 1 Open HotTab utility by pressing Menu Button located on the front panel OR Launching HotTab Utility application 2 Tap on Device RFID Setting and the setting utility will show up as below Devices Ee OU ad Bim gt aad dp O eb O Sound Data Output O Display data on UI O 6 Emulate keyboard input RFID Setting SN Extend COM SN Extend_USB 30 Trigger Setting Auto Scan The default setting for RFID trigger is AUTO SCAN Under this setting the RFID Reader will always be ready to scan tags 1 When the RFID tag is detected from RFID antenna the data will be read automatically User can define the RFID scanning freque
Download Pdf Manuals
Related Search