Home

7 SAVING THE MEASUREMENT RESULTS - FILE Saving

image

Contents

1. Increase of the LOGGER AVAILABLE memory after deletion a file from logger memory The displays below illustrates the erasing from the logger memory another big file 9 kB named amp LOG17 just after the erasing of the file amp LOG8 the FILES FREE SPACE TOTAL AVAILABLE and LOGGER FREE SPACE remain unchanged while the LOGGER AVAILABLE is increased o a a FREE SPACE FREE SPACE FILES FREE SPACE TOTAL AVAILABLE 5G fom eae Deleted O K ae 7181032 bytes LOGGER FREE SPACE POSo MIN RMS PRESS ANY KEY S256re2 bytes Execution of the amp LOG17 file deletion and the influence of this process on the memory space 7 4 3 Deleting files with setup settings SETUP FILES In order to enter the window one has to press the lt ENTER gt push button on the inversely displayed SETUP FILES text of the DELETE sub list using the lt A gt lt y gt push buttons The DELETE sub list is closed and the instrument returns to the FILE list after pressing the lt ESC gt push button In order to enter the list of the saved setup files in the memory one has to press the lt ENTER gt push button In the case when the setup files were not saved in the memory the special message is displayed and the instrument waits for the reaction of the user The user should press any push button except the lt SHIFT gt and lt ALT gt oa DELETE RESULT FILES LOGGER FILES lt ENTER gt SETUP FILES SETUP FILES selected to be deleted and the instrument
2. 7 6 SVAN 953 USER MANUAL A Notice After the usage of the lt ENTER gt and lt ALT gt push buttons if the DIRECT SAVE option is switched on the measurement results are saved only once The following pressing will not cause any instrument s reaction unless next measurement is performed The same result can be saved in the multiply number of files only using the SAVE SAVE NEXT function Finally let us present some examples showing the occupation of the result files memory and the logger files memory after the execution of the saving operation Example 1 Let us assume the settings presented below where one measurement is performed with the integration period equal to 10 seconds nothing is saved in the logger and the statistics are not stored The measurement results are saved in the file named EXAMP1 oa ao a a HEASUR SETUP SAVE OPTIO FILE NAME FILE INFO START DELAY is GEXAMPH FILE HAME Gena te INTEGRE PERIOD ifs 145 CYCLE 1 E JUH 2067 cE LOGGER EA AUTO SAVE z 12 23 12 ELAPSED TIME 00 600 10 SH Delete SH Insert Settings and the FILE INFO after the performed measurements The size of the file is equal to 452 bytes and it is visible in the FILE INFO window The detailed description of the level meter file structure is given in App B The EXAMP 1 file saved in the result files memory decreases the amount of the FREESPACE and TOTAL AVAILABLE memory by the value of the fil
3. Exemplary contents of the LOAD SETUP window The name of the file is accepted and the file is loaded after pressing the lt ENTER gt push button The message with the name of the selected file is displayed during the execution of the loading operation The next message is displayed after successful end of loading operation The instrument waits for the reaction of the user any push button should be pressed except the lt SHIFT gt or lt ALT gt one and after pressing a push button it returns to the FILE list oa oa a a LOAD SETUP FILE FILE NO 371E DELETE ALL FILE NAME SET SET2 SET2 lt A KEY gt DEFRAGMENTATION Loading Loaded 0 K carina nare FREE SPACE SAVE SETUP DATE 7 HOW 2a86 TIME 21 64 45 PRESS ANY KEY Displays after the execution of the LOAD SETUP operation 7 11 Connecting the external USB memory stick DIRECTORY The DIRECTORY text appears in the FILE list when the USB memory stick is connected to the device the USB DISK option has to be selected in USB HOST PORT window in SETUP list In order to enter the window the user has to select the DIRECTORY text in the FILE list using the lt A gt lt v gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt one The return to the FILE list is possible after pressing the lt ESC gt push button D m DIRECTORY FREE SPACE 62977 KB FILE DEFRAGMENTAT IOW CATALOGUE DIF HO EA DIR HAME J1JAH Edit directory
4. Press ENTER to SAVE Press ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF Press ESC to SKIF SH Delete SH i Insert J SH Delete SH Insert PSH Delete SH Insert Displays in the FILE NAME edition after pressing the lt SHIFT gt and lt gt gt push buttons Press ENTER to SAVE Press ESC to SKIF SH Delete SH Insert oa SAVE SETUP FILE HARE LER SAVE m SAVE SETUP FILE HAME LE E SAVE ao SAVE SETUP FILE HAME LEM E SAVE m SAVE SETUP FILE WAME LEM E SAVE Press ENTER to SAVE Press ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF Press ESC to SKIF SH Delete SH i Insert J SH Delete SH Insert PSH Delete SH Insert Displays in the FILE NAME edition after pressing the lt SHIFT gt and lt lt gt push buttons Press ENTER to SAVE Press ESC to SKIF SH Delete SH Insert The edited name is accepted and the setup file is saved after pressing the lt ENTER gt push button The special warning is displayed in the case the file with the edited name already exists in the memory if the REPLACE position is not activated path MENU FILE SAVE OPTIONS The instrument waits then for a reaction of the user any push button should be pressed except the lt SHIFT gt or the lt ALT gt one oa ao oa SAVE SETUP SAVE OPTIONS FILE FILE WAME LEW_M3 CJ DELETE ALL SAVE LACE i DEFRAGMENTATION SALVE STATISTICS CATALOGUE Press EHTER to SAUE AUTO SA
5. SETUP 12 JUL 2687 HE 13 42 58 Execution of the SET7 file deletion a a a a FREE SPACE FREE SPACE FREE SPACE FREE SPACE FILES FREE SPACE ei TOTAL _AWAILABLE A FILES FREE SPACE ei TOTAL _AWAILABLE Influence of the execution of the SETS file deletion on the memory space The displays below illustrates the erasing from the flash memory another file named SET8 the FILES FREE SPACE LOGGER FREE SPACE and LOGGER AVAILABLE remain unchanged while the TOTAL AVAILABLE is increased 7 24 SVAN 953 USER MANUAL o o o o DELETE FREE SPACE FREE SPACE FILE HO MA FILES FREE SPACE TOTAL AWAILABLE FILE HAME SET4 SET4 TSETUP Deleted D E DATE 12 JUL 2687 TIME 13 43 68 PRESS ANY KEY Execution of the SET4 file deletion and the influence of this process on the memory space 7 5 Removing all files with measurement results from memory DELETE ALL The DELETE ALL is used to remove all files from memory In order to enter the position the user has to select the DELETE ALL text in the FILE list using the lt A gt lt y gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt one The DELETE ALL sub list consists of three positions RESULT FILES LOGGER FILES and SETUP FILES DEFRAGMENTAT LOH DELETE ALL text highlighted displayed inversely in the FILE list 7 5 1 Deleting all result files RESULT FILES In order to activate the position the user has to place the special character
6. of 2050 bytes 7 8 SVAN 953 USER MANUAL a a a a FREE SPACE FREE SPACE FREE SPACE FREE SPACE FILES FREE SPACE TOTAL AVAILABLE FILES FREE SPACE TOTAL_AVAILABLE F173966 bytes LOGGER FREE SPACE 8244666 bytes LOGGER AVAILABLE 8246656 bytes 8246656 bytes S244606 bytes S244606 bytes FREE SPACE window before and after saving the EXAMP3 and amp LOG96 files Example 4 Let us assume the settings presented below where one measurement is performed with the integration period equal to 10 seconds the statistics are saved and the LOGGER is activated On The measurement results are saved in the file named EXAMP4 oa ao a SAVE OPTIONS MEASUR SETUP FILE NAME 0 START DELAY 134 3kANFS4 i IHTEGE coe 195 Laon LOGGER HAME amp LOG9 SPP SH Delete SH Insert Settings before the execution of the measurements All together eight different results coming from PROFILE 1 PEAK MAX MIN and RMS PROFILE 2 PEAK and RMS and PROFILE 3 MAX and MIN path MENU INPUT PROFILE x are saved every 100 milliseconds So during 10 seconds integration period it gives 10 10 100 RECORDS path MENU DISPLAY LOGGER VIEW each containing eight values each two bytes long All results are saved in the logger s file named amp LOG97 The exact size of the amp LOG97 is not displayed only the approximate value 2 kilobytes can be visible in the logger files delete window path MENU FILE DELETE LOGGER FILES Oo
7. s memory does not contain any file After pressing the lt ENTER gt push button the instrument checks its current state In the case when the measurements are performed the SETUP FILES entering is impossible In such case the message is displayed and the instrument returns after few seconds to the DELETE sub list o MEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress The data about the existing in the instrument setup files are displayed after successful opening the FILE DELETE LOGGER FILES window pressing the lt ENTER gt push button The current number of the file and the total number of the saved setup files is displayed in the first line of the window The date and time of the SAVE SETUP operation is displayed in the last two lines respectively The change of the current file with the unit step can be done after pressing the lt lt gt lt gt gt push buttons The first file is available after pressing the lt lt gt with lt SHIFT gt push button or lt v gt with lt SHIFT gt and the last one is displayed after pressing the lt gt gt with lt SHIFT gt push button or lt A gt with lt SHIFT gt 7 23 SVAN 953 USER MANUAL a oa DELETE DELETE FILE HO Td FILE HO ea FILE HO ee FILE MAME SETA FILE HAME SETZ FILE HAME SET SETUP SETUP SETUF DATE 12 JUL 2807 DATE 12 JUL 2007 DATE 12 JUL 2807 TIME 13 4
8. Oo pm PROFILEC413 PROFILES PROFILE C33 LOGGER 2049KB gt FILTER P IL TER N FTE BEBE DETECTOR FAST DETECTOR FAST DETECTOR FAST LOG FILE CV CV tad LOGGER RMS LOGGER RMS a i a o FILE INFO FILE INFO FILE WANE EXAMP4 FILE NAME GEXAMP4 FILE SIZE 1932E DATE JUH 2007 TIME 14 08 16 ELAPSED TIME 80 40 16 PoSo MAx MIH Settings and the FILE INFO during and after the measurements The size of the file is equal to 1932 bytes and it is visible in the FILE INFO window The detailed description of the level meter file structure is given in App B The EXAMP 1 file saved in the result files memory decreases the amount of the FILESFREESPACE and TOTAL AVAILABLE memory by the value of the file size 1932 bytes plus 4 bytes containing the addresses of the previous file and 4 bytes containing the address of the next file all together 1940 bytes The size of the logger files memory the LOGGER FREE SPACE and LOGGER AVAILABLE is also decreased by the value of 2050 bytes a a oa oa FREE SPACE FREE SPACE FREE SPACE FREE SPACE FILES FREE SPACE TOTAL AVAILABLE FILES FREE SPACE TOTAL AVAILABLE F172826 bytes LOGGER FREE SPACE 8242556 bytes LOGGER AVAILABLE 8244666 bytes S244606 bytes 8242556 bytes 8242556 bytes FREE SPACE window before and after saving the EXAMP4 and amp LOG97 files 7 9 SVAN 953 USER MANUAL All four result files EXAMP1 EXAMP2 EXAMP3 and EXAMP4 and two logger f
9. SHt belete SH Insert SH Delete SH Insert SAVE FILE MAME IBOCTa SAVE SAVE FILE HAME HE0CTA SAVE SAVE FILE MAME POCTA SAVE FILE HAME 380CTA SAVE Press ENTER to SAVE Fress ESC to SKIF SH Delete SH Insert Press ENTER to SAVE Fress ESC to SKIF SH Delete SH Insert Press ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF SH Delete SH i Insert J SH Delete SH Insert Display during the selection of the character SAVE FILE HAME 260 iCTa SAVE SAVE FILE HAME 2800 CTa SAVE SAVE FILE WANE 260 CT SAVE SAVE FILE HAME 2508 C SAVE Press ENTER to SAVE Fress ESC to SKIF SH Delete SH Insert Press ENTER to SAVE Press ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF Press ESC to SKIF SH Delete SH i Insert J SH Delete SH Insert SH Delete SH Insert Displays in the FILE NAME edition after pressing the lt SHIFT gt and lt gt gt push buttons SAVE FILE WANE 2608 C SAVE SAVE FILE HAME 2800 c SAVE SAVE FILE WANE 280 SAVE SAVE FILE HAME 2508 SAVE Press ENTER to SAVE Press ESC to SKIF SH rDelete SH Insert Press ENTER to SAVE Press ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF Press ESC to SKIF SH Delete SH i Insert J SH Delete SH Insert PSH Delete SH Insert Displays in the FILE NAME edition after pressing the lt SHIFT gt and lt lt gt push buttons
10. The edited name is accepted and the file is saved after pressing the lt ENTER gt push button The special warning is displayed in the case the file with the edited name already exists in the memory The instrument waits then for a reaction of the user any push button should be pressed except the lt SHIFT gt or the lt ALT gt one All changes introduced to the file name during the edition are ignored after pressing the lt ESC gt push button This pressing causes the return to the list from which the SAVE option was entered SVAN 953 USER MANUAL The return after the edition to the line with the SAVE or SAVE NEXT text is possible after pressing the lt v gt push button oa SAVE FILE HAME amp S0CTe SAVE SAUE OPTIONS LOAL 280CT0 is used Press ESC to SKIF SH Delete SH gt Insert PRESS ANY KEY o Press ENTER to SAVE oa SAVE FILE HAME s50CTa SAVE o SAVE FILE HAME ZS0CTA SAUE SAWE OPTIONS LOAD Press ENTER to SAVE 380CT0 Saved O K Press ESC to SKIF SH Delete SH gt Insert PRESS ANY KEY Press ENTER to SAWE DELETE DELETE ALL DEFRAGMENTATION Fress ESC to SKIF Fress UF to EDIT Displays during the attempt of overwriting the existing file changing the name and saving data The simplified edition consists in the addition at the end of the file name the natural number The increase by one of the number is made automatically After the saving operation execution the n
11. The file is no longer accessible but the recuperated memory is still unused for the next saving This memory becomes available after the defragmentation process path MENU FILE DEFRAGMENTATION in which all files are moved to the continuous space In order to illustrate it let us consider the result file named EXAMP2 which is 1878 bytes long After removing LMET file from the memory only the TOTAL AVAILABLE is increased path MENU FILE FREE SPACE 7 20 SVAN 953 USER MANUAL a D ME LMET gt lt ENTER gt gt LMET E Deleted O K PRESS ANY KEY a a oa FREE SPACE FREE SPACE FREE SPACE FREE SPACE FILES FREE SPACE TOTAL AVAILABLE FILES FREE SPACE TOTAL AVAILABLE 7188112 butes YLEBSr2 bytes LOGGER FREE SPACE 8236702 bytes LOGGER AVAILABLE B2356702 bytes S256re2 bytes S256re2 bytes S256re2 bytes Execution of the file deletion and the influence of this process on the memory space The displays below illustrates the erasing from the flash memory another file named EXAMP3 which was also 460 bytes long the FILES FREE SPACE LOGGER FREE SPACE and LOGGER AVAILABLE remain unchanged while the TOTAL AVAILABLE is increased o o o o DELETE FREE SPACE FREE SPACE FILE HO PEER FILES FREE SPACE TOTAL AVAILABLE FILE HAME DOSE DOSE 7180112 bytes 7181032 bytes DOSE METER SOUND J Deleted O K TOTAL AVAILABLE LOGGER FREE SPACE LOG FILE T1I81832 bytes 8236702 bytes DATE 12 JUL 2687 LOGGER FR
12. active V after pressing the lt ENTER gt push button the FILE NAME window is opened for editing the names for the AUTO SAVE files The SAVE OPTION sub list is closed ignoring all settings made in it after pressing the lt ESC gt push button 7 2 4 Controlling the measurement results savings AUTO SAVE Using the AUTO SAVE one can set the self saving of the measurement results V or to switch off this possibility The activation or deactivation of the AUTO SAVE is done by pressing the lt lt gt lt gt gt push buttons This position was also established in order not to waste too much memory of the instruments when the self saving is not necessary oa ao SAVE OPTIO SAVE OPTIO SAVE MAX SPECT SAVE MAX SPECT SAVE OPTIONS sub list the selection of the AUTO SAVE in LEVEL METER and in 1 1 OCTAVE modes 7 12 SVAN 953 USER MANUAL A Notice The AUTO SAVE function can be performed only in the case when the INTEGR PERIOD path MENU INPUT MEASUREMENT SETUP is not less than 10 seconds If it is less than 10 seconds the measurement results are not saved without any indication of that fact There is only one exception when the REP CYCLE path MENU INPUT MEASUREMENT SETUP is equal to one the AUTO SAVE function is executed disregarding the value of the integration period ao oa SAVE OPTIONS SAVE OPTIONS SAVE OPTIONS sub list the selection of the AUTO SAVE in DOSE METER The FILE NAME wi
13. current file LEVEL METER 1 1 OCTAVE or DOSE METER is given in the third line If during the measurements which results are saved in the file the logger file was also created its name is displayed in the fourth line 7 32 SVAN 953 USER MANUAL A Notice The logger file can be deleted from the instrument s memory in the FILE DELETE LOGGER FILES window and this deleting operation does not modify the contents of the fourth line of the CATALOGUE window The date and time of the SAVE operation are displayed in the fifth and sixth line respectively The change of the current file with the unit step can be done after pressing the lt lt gt lt gt gt push buttons The first file is available after pressing the lt lt gt with lt SHIFT gt push button or lt v gt with lt SHIFT gt and the last one is displayed after pressing the lt gt gt with lt SHIFT gt push button or lt A gt with lt SHIFT gt The setup file is indicated by the SETUP text displayed in the third line instead of the LEVEL METER 1 1 OCTAVE DOSE METER text m o CATALOGUE CATALOGUE CATALOGUE CATALOGUE a O ee 2 FILE HAME LEW Me i ERESI FILE NAME GeESaee SETUP DOSE METER CSOUHDI DATE f HOW z666 f 0 i LE LOG FILE amp LOGre TIME 28 52 34 DATE 5 HOW zZ B6 roo TIME 28 24 12 TIME 20 25 36 Contents of the CATALOGUE window A Notice Many result files can be associated with one logger file i e durin
14. in the line with the RESULT FILES text using the lt gt gt push button The DELETE ALL sub list is closed and the instrument returns to the FILE list after pressing the lt ESC gt push button In order to enter the DELETE ALL window one has to press the lt ENTER gt push button oa oa DELETE ALL DELETE ALL RESULT FILES MB FESULT FILES al LOGGER FILES 1 LOGGER FILES if SETUP FILES 1 SETUP FILES if Press ENTER to DELETE Press ENTER to DELETE RESULT FILES selected to the execution of the DELETE ALL operation After pressing the lt ENTER gt push button the instrument checks its current state In the case when the measurements are performed the execution of the DELETE ALL operation is not possible In such case the message is displayed for few seconds and the instruments returns to the FILE list o 1 MEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress If the measurements are not performed the instrument requests the confirmation of the operation after entering this window after pressing the lt ENTER gt push button After next pressing the lt ENTER gt push button when the NO option is selected the window is closed and the instrument returns to the FILE list The selection of the NO or YES option is possible using the lt lt gt lt gt gt push buttons The return to the FILE list is also possible after pressing the lt ESC gt push b
15. list with the DELETE text highlighted displayed inversely In the DELETE window there are three elements RESULT FILES LOGGER FILES and SETUP FILES In order to enter the selected sub list the user has to select the proper text to display it inversely using the lt A gt lt v gt or lt lt gt lt gt gt push buttons and then press the lt ENTER gt one The DELETE window is closed and the instrument returns to the FILE list after pressing the lt ESC gt one 7 4 1 Deleting files with the main results RESULT FILES In order to enter the window one has to press the lt ENTER gt push button on the inversely displayed RESULT FILES text of the DELETE sub list using the lt A gt lt v gt push buttons The DELETE sub list is closed and the instrument returns to the FILE list after pressing the lt ESC gt push button In order to enter the list of the saved result files in the flash memory one has to press the lt ENTER gt push button In the case when the result files were not saved in the memory the special message is displayed and the instrument waits for the reaction of the user The user should press any push button except the lt SHIFT gt and lt ALT gt s DELETE RESULT FILES 7 LOGGER FILES gt lt ENTER gt gt SETUP FILES RESULT FILES selected to be deleted and the flash memory does not contain any file After pressing the lt ENTER gt push button the instrument checks its current state In the case
16. text using the lt lt gt lt gt gt push buttons SAVE FILE HAME amp S0CTe SAVE SAVE FILE HAME 230CTe SAVE SAVE FILE HAE 2890CT SAVE SAVE FILE HAE 250878 SAVE Press ENTER to SAVE Press ESC to SKIF SH Delete SH Insert Press ENTER to SAVE Press ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF Press ESC to SKIF SH Delete SH i Insert J SH Delete SH gt Insert PSH Delete SH Insert Display during the selection of the character s position to be edited The available ASCII characters can be changed using the lt A gt or lt v gt push button pressed together with the lt SHIFT gt one The subsequent digits underline big letters and space appear on the display in the inversely displayed position after each pressing of the mentioned above push buttons a SAVE SAVE FILE HAME amp S0CTe FILE NAME S0CTS SAVE SAVE SAVE FILE HAME Z0CTA SAVE SAVE FILE HAME 380CTA SAVE Press ENTER to SAVE Press ENTER to SAVE Fress ESC to SKIF Fress ESC to SKIF SH rDelete SH i Insert PP SHt belete SH Insert Press ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF SHtrDelete SH i Insert J SH Delete SH Insert a a SAVE SAVE SAVE FILE HAME B0CTA FILE NAME BS0CTS FILE HAME 380CTS SAVE SAVE SAVE Press ENTER to SAVE Press ENTER to SAVE Press ENTER to SAVE Fress ESC to SKIF Fress ESC to SKIF Fress ESC to SKIF SH Delete SH Insert PP
17. the display when the USB Memory Stick is connected to the instrument it enables the user to move files from internal memory of the instrument to the external USB Memory Stick SVAN 953 USER MANUAL Pressing the lt SHIFT gt and lt A gt or lt SHIFT gt and lt lt gt results in a movement to the first position of the opened list and pressing the lt SHIFT gt and lt v gt or lt SHIFT gt and lt gt gt results in a movement to the last position of the opened list a FILE DELETE ALL DEFRAGMENTATION CATALOGUE FREE SPACE SAVE SETUP TE ALL DEFRAGMENTAT LOH FILE list of the instrument In each available position any change is performed by means of the lt lt gt lt gt gt push buttons In order to confirm the selection the lt ENTER gt push button has to be pressed After this confirmation the opened window or list is closed In order to ignore any changes made in the opened window or list the user has to press the lt ESC gt push button 7 1 Saving files in the instrument s memory SAVE and SAVE NEXT The SAVE is used for storing data in the internal non volatile FLASH DISC memory files are always written at the beginning of a free continuous space as a file see Appendix B for the file formats In order to enter the window the user has to select the SAVE text in the FILE list using the lt A gt or lt lt gt push button and press the lt ENTER gt push button There are two available functions the
18. when the measurements are performed the RESULT FILES entering is impossible In such case the message is displayed and the instrument returns after few seconds to the DELETE sub list o 1 MEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress The same data about the existing in the instrument files as in the FILE LOAD window are displayed after successful opening the FILE DELETE RESULT FILES one pressing the lt ENTER gt push button The current number of the file and the total number of the saved files is displayed in the first line of the window The name of the file is displayed in the second line its current number is presented in the first line The name of the file suggests the operation the file was created in The names in which the first character is are coming from the AUTO SAVE function 7 19 SVAN 953 USER MANUAL The file with the default name Timer is coming from the AUTO SAVE function executed in the TIMER operation The other names suggest the SAVE SAVE NEXT function The type of the current file LEVEL METER 1 1 OCTAVE or DOSE METER is given in the third line If during the measurements which results are saved in the file the logger file was also created its name is displayed in the fourth line A Notice The logger file can be deleted from the instrument s memory in the FILE DELETE LOGGER FILES window and this deleting oper
19. 1 38 TIME 13 42 56 TIME 13 43 84 Selection of the SETUP FILES to be deleted The selected file is deleted after pressing the lt ENTER gt push button The message is displayed after the successful end of the operation The instrument waits for the reaction of the user any push button should be pressed except the lt SHIFT gt and lt ALT gt one and after pressing a push button it returns to the DELETE sub list o oa DELETE FILE WO ere FILE HAME SET2 SETZ i BETR lt ENTER gt JelepEl o g lt ANY PUSH BUTTON gt r 13 42 56 PRESS ANY KEY oa oa DELETE Reals FILES 2 SETIP FILES Deleted O K PRESS ANY KEY Execution of the RESULT FILES deletion After the execution of the setup files removing from the memory usually the FREE SPACE memory path MENU FILE FREE SPACE rests the same as before the deletion but TOTAL AVAILABLE memory is increased It is because erased file was somewhere in the file s space The file is no longer accessible but the recuperated memory is still unused for the next saving This memory becomes available after the defragmentation process path MENU FILE DEFRAGMENTATION FILES DEFRAGMENT in which all files are moved to the continuous space In order to illustrate it let us consider the removing from the memory the setup file named SET7 After this only the TOTAL AVAILABLE is increased path MENU FILE FREE SPACE a Deleted O K PRESS ANY KEY
20. 12 JUL 2007 DATE 12 JUL 2007 TIME 05 40 44 TIME 06 52 12 TIME 7 36 56 Exemplary contents of the LOAD window A Notice Many result files can be associated with one logger file i e during the execution of the AUTO SAVE function MEE D MEE FILE HANE RES 1G 11 FILE NAME RES 12 DOSE METER CSOUND J DOSE METER CSOUND J LOG FILE amp LOG33 i LOG FILE amp LOG33 DATE 23 OCT 2686 DATE 23 OCT 2886 TIME 23 12 10 TIME 23 12 20 TIME 23 12 30 TIME 23 12 48 Exemplary result files associated with the same logger file amp LOG33 The name of the file is accepted and the file is loaded after pressing the lt ENTER gt push button The message with the name of the selected file is displayed during the execution of the loading operation SVAN 953 USER MANUAL o 4 O1JAHI9 Loading Display during the execution of the loading function The next message is displayed after successful end of loading operation The instrument waits for the reaction of the user any push button should be pressed except the lt SHIFT gt or lt ALT gt one and after pressing a push button it returns to the FILE list o a o FILE SALE Loaded O K Loaded O K Loaded O K DELETE DELETE ALL DEFRAGMENTATION PRESS ANY KEY PRES 5S ANY KEY PRESS ANY KEY Displays after the execution of the LOAD operation The contents of the loaded file is displayed in the available result presentation modes
21. AGMENTATION sub list a DEFRAGMENTATION Unnecessary PRESS ANY KEY Message in the case when the execution of the DEFRAGMENTATION operation is unnecessary If there are conditions to execute the DEFRAGMENTATION operation it is done and the current progress is shown on the display After the successful execution the special message is displayed and the instrument waits for the reaction of the user Any push button should be then pressed except the lt SHIFT gt and lt ALT gt one After pressing a push button the instrument returns to the DEFRAGMENTATION sub list pm o o Defragmentation Clearing q q DEFRAGMENTATION Flease wait Flease wait finished PRESS ANY KEY Execution of the DEFRAGMENTATION operation The displays below illustrate the results of the LOGGER DEFRAGMENT after the execution the LOGGER FREE SPACE and LOGGER AVAILABLE become equal while the FILES FREE SPACE and TOTAL AVAILABLE remain unchanged 7 31 SVAN 953 USER MANUAL oa a FREE SPACE FREE SPACE FILES FREE SPACE f TOTAL AWAILABLE a a a a FREE SPACE FREE SPACE FREE SPACE FREE SPACE FILES FREE SPACE eT TOTAL AWAILABLE 5 FILES FREE SPACE ei TOTAL AWAILABLE Result of the LOGGER DEFRAGMENTATION operation 7 7 Checking the contents of the memory CATALOGUE The CATALOGUE is used for checking the contents of the memory the list of the result and setup files In order to enter the window the user has to select the
22. CATALOGUE text in the FILE list using the lt A gt lt W gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt one a FILE CATALOGUE text highlighted displayed inversely in the FILE list In the case when the instrument memory is empty no file is stored after entering the CATALOGUE the NO FILES text is displayed and the instrument waits for the reaction of the user The user should press then the lt ESC gt lt ENTER gt the instrument returns to the FILE list or lt START STOP gt push button the instrument starts the measurement a CATALOGUE HO FILES CATALOGUE window when the memory is empty In the case when the result and setup files memory in the instrument is not empty some files are stored another window is displayed in which the same data about the existing in the instrument files as in the FILE LOAD window are presented The current number of the file and the total number of the saved result and setup files is displayed in the first line of the window The name of the file is displayed in the second line its current number is presented in the first line The name of the file suggests the operation the file was created in The names in which the first character is are coming from the AUTO SAVE function The file with the default name Timer is coming from the AUTO SAVE function executed in the TIMER operation The other names suggest the SAVE SAVE NEXT function The type of the
23. CTORY DIRECTORY DIRECTORY i FREE SPACE 62977 KB PREE SPACE 62992 KB FREE SPACES 62952 KE Please wait Counting files Edit directory name Edit directory name SH Delete SH i Insert J SH Delete SH gt Insert Select directory FILE list the DIRECTORY window DIR HO 2 DIR HO 2 IR HO DIR HAME 1 JAH DIR HAME A1JAH DIR HAME 11JAH A Notice After connecting a USB memory stick to the device the paper sheet icon appears in the top of the display 7 12 Copying files to the external USB memory stick COPY FILES TO USB The COPY FILES TO USB is used for copying files to the external USB memory stick The position is opened after pressing the lt ENTER gt push button when the COPY FILES TO USB text in the FILE list is displayed inversely The return to the FILE list is possible after pressing the lt ESC gt push button D a COPY FILES RESULT FILES RE LOGGER FILES SETUP FILES DIRECTORY 25 JAH F b Fress ENTER to COPY a FILE list with the COPY FILES TO USB text selected a and the COPY FILES window opened b The COPY FILES TO USB sub list consists of three positions to be selected RESULT FILES LOGGER FILES and SETUP FILES and DIRECTORY position with the name of the directory in which the files from the internal memory of the instrument will be stored In order to copy required type of the files the user has to place the special character in the line with the RESULT FILES LOGGE
24. EE SPACE LOGGER AVAILABLE TINE 6 52 12 PRESS ANY KEY B2356702 bytes S256re2 bytes Execution of the EXAMPS3 file deletion and the influence of this process on the memory space 7 4 2 Deleting logger files LOGGER FILES In order to enter the window one has to press the lt ENTER gt push button on the inversely displayed LOGGER FILES text of the DELETE sub list using the lt A gt lt y gt push buttons The DELETE sub list is closed and the instrument returns to the FILE list after pressing the lt ESC gt push button In order to enter the list of the saved logger files in the memory one has to press the lt ENTER gt push button In the case when the logger files were not saved in the memory the special message is displayed and the instrument waits for the reaction of the user The user should press any push button except the lt SHIFT gt and lt ALT gt a DELETE RESULT FILES gt lt ENTER gt gt SETUP FILES LOGGER FILES selected to be deleted and the memory does not contain any file After pressing the lt ENTER gt push button the instrument checks its current state In the case when the measurements are performed the LOGGER FILES entering is impossible In such case the message is displayed and the instrument returns after few seconds to the DELETE sub list O 1 HEASUREHENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress 7 21 SVAN 953 US
25. ER MANUAL The similar data about the existing in the instrument logger files as in the DISPLAY LOGGER VIEW window are displayed after successful opening the FILE DELETE LOGGER FILES one pressing the lt ENTER gt push button In the first line the available still loggers memory is displayed followed by e The selected number of the logger s file and the number of all saved files FILE NO e The name of the logger s file LOG FILE e The size of the logger file which name is displayed in the previous line LOG SIZE e The results saved if any are present in the logger from the first profile P 1 e The results saved if any are present in the logger from the second profile P 2 e The results saved if any are present in the logger from the third profile P 3 The change of the current file with the unit step can be done after pressing the lt lt gt lt gt gt push buttons The first file is available after pressing the lt lt gt with lt SHIFT gt push button or lt y gt with lt SHIFT gt and the last one is displayed after pressing the lt gt gt with lt SHIFT gt push button or lt A gt with lt SHIFT gt ILE H F LOG FILE amp LOG LOG SIZE 496 B Pci PEAK MAK MIH RMS Pe2o PEAK MAs P23 PEAK MAX P33 MIH RMS Pr3i MIN RMS Selection of the LOGGER FILES to be deleted The selected file is deleted after pressing the lt ENTER gt push button The message is displayed after the
26. ETUP is used for storing setup settings in the internal non volatile FLASH DISC memory files are always written at the beginning of a free continuous space as a file see Appendix B for the file formats In order to enter the window the user has to select the SAVE SETUP text in the FILE list using the lt A gt lt y gt or lt lt gt lt gt gt push button and press the lt ENTER gt one a FILE ELETE ALL DEFRAGMEHTAT 10H CATALOGUE FREE SPACE LOAD SETUP SAVE SETUP text highlighted displayed inversely in the FILE list There are two available functions the SAVE NEXT save a setup file with the name increased by one and SAVE save a setup file with the edited name These functions are available after pressing the lt lt gt lt gt gt push buttons 7 34 SVAN 953 USER MANUAL oa oa SAVE SETUP SAVE SETUP FILE MAME SET FILE MAME SET SAUE HEST Fress ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF Press UF to EDIT Press UF to EDIT SAVE SETUP window in the FILE list The name of the file in which the setup settings are to be saved is displayed above the SAVE or SAVE NEXT text The default name for a setup file is displayed in the case of the first entering to this position after power on The default file name for setup settings is SET The line of the setup file s name edition FILE NAME is opened after pressing the lt A gt push button The user can skip the setup fi
27. FILE x are saved every 100 milliseconds Therefore during 10 seconds integration period it gives 10 10 100 RECORDS path MENU DISPLAY LOGGER VIEW each containing eight values each two bytes long All results are saved in the logger s file named amp LOG96 The exact size of the amp LOG96 is not displayed only the approximate value 2 kilobytes can be visible in the logger files delete window path MENU FILE DELETE LOGGER FILES oa a ao a PROFILE 13 PROFILE 23 PROFILE 33 LOGGER BOSi1KB3 A FILE HO Eksi LOG FILE LOG36 RECORDS iff Pcio PEAK MAK MIH RMS Pe2o PERK RMS PoSo MAx MIH a a a FILE INFO FILE INFO oOo f H FILE INFO FILE NAME EXANPS FILE SIZE 4526 DATE JUH 2887 TIME 12 36 46 f 36 46 ELAPSED TIME 8 00 18 ELAPSED TIME 00 00 18 FILE NAME EXAMPS FILE NAME EXAMPS FILE INFO during and after the measurements The size of the file is equal to 452 bytes and it is visible in the FILE INFO window The detailed description of the level meter file structure is given in App B The EXAMPS3 file saved in the result files memory decreases the amount of the FREESPACE and TOTAL AVAILABLE memory by the value of the file size 452 bytes plus 4 bytes containing the addresses of the previous file and 4 bytes containing the address of the next file all together 460 bytes The size of the logger files memory the LOGGER FREE SPACE and LOGGER AVAILABLE is also decreased by the value
28. L SH Delete SH gt Insert PRESS ANY KEY CEFRAGMENTATION Press ENTER to SAVE Displays during and after the execution of the SAVE operation As it was already written it is not possible to store the data in the file which already exists when the REPLACE is not active path MENU FILE SAVE OPTIONS REPLACE The presented below sequence of displays illustrates the situation when during the name edition process the user selected the name which was used before The instrument displays a special message and waits for the reaction of the user any push button should be pressed except the lt SHIFT gt or the lt ALT gt one and after pressing a push button it returns to the FILE list oa a a SAVE FILE HAME amp S0CTe SAVE SAUE OPTIONS 280CT0 Saved O K PRESS ANY KEY LOAL DELETE DELETE ALL DEFRAGMENTATION 280CT0 is used Press ESC to SKIF SH Delete SH Insert FRESS ANY KEY Press ENTER to SAVE Displays after the attempt to overwrite a file if the REPLACE is not active A Notice The direct access to the SAVE SAVE NEXT function is possible after pressing simultaneously the lt ENTER gt and lt ALT gt push buttons if the DIRECT SAVE option is switched off path MENU FILE SAVE OPTIONS DIRECT SAVE In another case DIRECT SAVE option is switched on the results are saved after pressing these push buttons in the file with the automatically incremented name
29. LETE ALL operation in the case of LOGGER FILES selected 7 5 3 Deleting all setup files SETUP FILES In order to activate the position the user has to place the special character in the line with the SETUP FILES text using the lt gt gt push button The DELETE ALL sub list is closed and the instrument returns to the FILE list after pressing the lt ESC gt push button In order to enter the DELETE ALL window one has to press the lt ENTER gt push button oa ao DELETE ALL DELETE ALL RESULT FILES DENI RESULT FILES Td LOGGER FILES LOGGER FILES KESI SETUP FILES H SETUP FILES Dal Press ENTER to DELETE Fress ENTER to DELETE SETUP FILES selected to the execution of the DELETE ALL operation After pressing the lt ENTER gt push button the instrument checks its current state In the case when the measurements are performed the execution of the DELETE ALL operation is not possible In such case the message is displayed for few seconds and the instruments returns to the FILE list o MEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress If the measurements are not performed the instrument requests the confirmation of the operation after entering this window after pressing the lt ENTER gt push button After next pressing the lt ENTER gt push button when the NO option is selected the window is closed and the instrument returns to the FILE list The selec
30. LEY Mi SAVE HEAT Ro LEY_M2 Saved D K Saved O K Press EHTER ta SAVE Press ENTER ta SAVE Press ESC to SKIF Press ESC to SKIF SH Delete SH gt Insert PRESS ANY KEY Press UP to EDIT PRESS ANY KEY Displays in the simplified edition of the setup file name and saving operation execution 7 36 SVAN 953 USER MANUAL The number can be changed from 1 to N The only limitation of the N value is the length of the file name which cannot be longer than eight characters In the case when such limitation is achieved and the instrument can not change automatically the file s name the only possibility is to edit new base file name A Notice The files can be overwritten the use of the same file name without any warning if the REPLACE option is switched on path MENU FILE SAVE OPTIONS REPLACE oa oa a m SAVE SETUP SAVE SETUP FILE ae LEU METS FILE MAME LEU METS SAVE HE E LEU_HET9 SAUE HET LEU_HMET9 Saved 0 K hd d Press ENTER to SAUE ave Press ENTER to SAUE 25 uze Press ESC to SKIF Press ESC to SKIF Press UP to EDIT PRESS ANY KEY 0 Press UP to EDIT PRESS ANY KEY Displays in the simplified edition of the file name saving and the saturation of that operation As it was already written the instrument attempts to save a file after pressing the lt ENTER gt push button The saving is not possible in the case when the instrument is measuring the signal The special message is displayed for a
31. P gt push button the results are saved in the file with the selected name Depending on the instrument s mode and selected options the sequence of the displays available after each pressing of the lt A gt or lt v gt could be as presented below oa oa FILE INFO SPL Fast A FILE HAME RESS FILE SIZE 4526 T1 G dE DATE 17 JUL 2687 m TIME 14 15 44 ELAPSED TIME 48 44 15 Profiled i File g RESS 2116 FILE HANE RESS FILE SIZE 4526 if JUL z007 to d4 i5i44 ELAPSED TIME 68 68 15 Measurement results presented after pressing the lt A gt or lt V gt push buttons In the case when from a profile more than one result was saved in the logger s file the other results are presented after pressing the lt lt gt lt gt gt push buttons together with the lt ALT gt one Results saved from a profile presented after pressing the lt lt gt or lt gt gt and lt ALT gt push buttons After pressing the lt A gt or lt v gt and lt ALT gt push buttons the VIEW is changed path MENU DISPLAY DISPLAY SETUP LOGGER VIEW VIEW So after pressing these push buttons and then repeating the previous sequence the lt lt gt lt gt gt push buttons together with the lt ALT gt one the user can observe the displays presented below 7 14 SVAN 953 USER MANUAL Results saved from a profile presented after pressing the lt lt gt or lt gt gt and lt ALT gt push buttons Another measurement is started a
32. R FILES or SETUP FILES text using the lt gt gt or lt v gt push button After next pressing the lt ENTER gt push button when no option is selected the window is closed and the instrument returns to the FILE list The return to the FILE list is also possible after pressing the lt ESC gt push button D oa COPY FILES RESULT FILES D a COPY FILES RESULT FILES LOGGER FILES D a COPY FILES RESULT FILES LOGGER FILES SETUP FILES DIRECTORY 25 7AH Press ENTER to COPY b Press ENTER to COPY LOGGER FILES SETUP FILES DIRECTORY 25 7AH a Press ENTER to COPY RESULT FILES selection to the execution of the COPY FILES TO USB operation a the RESULT LOGGER and SETUP files selected to the execution of the COPY FILES TO USB operation b SETUP FILES DIRECTORY 25 7AH 7 40 SVAN 953 USER MANUAL After pressing the lt ENTER gt push button the instrument checks its current state When the measurements are performed the execution of the COPY FILES TO USB operation is not allowed In such case the message is displayed for few seconds and the instrument returns to the FILE list o g MEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress If the measurements are not performed the instrument starts the operation After the operation Files Copied O K message is presented on the display If a file has been already copied to the USB stick a
33. SAVE NEXT save a file with the name increased by one and SAVE save a file with the edited name These functions are available after pressing the lt lt gt lt gt gt push buttons ao ao SAVE SAVE FILE HAME S007 ae Press ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF Press UF to EDIT Press UF to EDIT SAVE window in the FILE list The name of the file in which the measurements results are to be saved is displayed above the SAVE or SAVE NEXT text The default name for a file is displayed in the case of the first entering to this position after power on The default name consists of the day and the month s abbreviation The line of the file s name edition FILE NAME is opened after pressing the lt A gt push button The user can skip the file s name edition and start saving file pressing the lt ENTER gt push button or return to the FILE list pressing the lt ESC gt one The edition process is presented on the Figure below The displayed inversely character is currently edited The lt lt gt lt gt gt lt A gt lt v gt and lt SHIFT gt push buttons are used for editing the name which cannot exceed eight characters SAVE FILE MAME S50CT SAVE HEAT Press ENTER to SAVE Press ESC to SKIF SHirDelete SH Insert Display during the process of setting the character in the edited name 7 3 SVAN 953 USER MANUAL One can select the proper position of the character in the edited
34. SVAN 953 USER MANUAL 7 SAVING THE MEASUREMENT RESULTS FILE The registration of the measurement results is an essential task for the efficient use of the instrument All available measurement results can be stored in the FLASH type memory of the instrument or on the USB memory stick There are two main ways for storing the measurement data in the instrument 1 Saving files with the main results and setup settings using the FILE list 2 Saving data in the logger s file A Notice The instrument s logger memory is independent from the results and setup memory The capacity of the available memory is equal to 16 MB and is divided between logger 8257280 bytes results and setup settings 7208736 bytes A Notice All of the options except DEFRAGMENTATION from the FILE list can be used for the USB memory stick if the instrument has the USB host controller option Saving files In the case of the SVAN 953 instrument there are files containing data e from Sound LEVEL METER mode available in the FILE list e from DOSE METER mode available in the FILE list e from 1 1 OCTAVE mode available in the FILE list e stored in the instrument s logger accessible in the DISPLAY LOGGER VIEW window A Notice The logger files are created automatically the usage of the SAVE is not required Each file consists of some elements which are the same for all kind of files e a file header e the unit and software spe
35. SVAN 953 USER MANUAL oa oa oa SAVE SETUP SAVE OPTIONS FILE NAME LEW_META 5 Saue A LEU_METO 5 Press ENTER to SAUE Saved Uii Fress ESC to SKIF E Press UP to EDIT PRESS ANY KEY SAVE MAS SPECT ao oa SAVE SETUP FILE HAME LEU_ METE Es LEU_METO Press ENTER to SALE eens dct BULB Press ESC to SKIF Press UP to EDIT PRESS ANY KEY Displays after the attempt to overwrite a file if the REPLACE is active 7 10 Loading the files with the setup settings LOAD SETUP The LOAD SETUP is used for loading setup setting file from the FLASH DISC e g for performing different type of measurements with different instrument s settings The position is opened after pressing the lt ENTER gt push button when the LOAD SETUP text in the FILE list is displayed inversely selected using the lt y gt or lt gt gt push buttons or lt v gt or lt gt gt with the lt SHIFT gt one The return to the FILE list is possible after pressing the lt ESC gt push button SAVE SETUP FILE list with the LOAD SETUP text highlighted displayed inversely A Notice It is not possible to load the file during the execution of the measurements On such attempt the message MEASUREMENT IN PROGRESS is displayed for about 3 seconds After pressing the lt ENTER gt push button the instrument checks its current state In the case when the measurements are performed the file loading is impossible and the message is displayed
36. VE i FREE SPACE Press ESC to SKIP DIRECT SAVE SH Delete SH Insert SAUE MAS SPECT PRESS ANY KEY L AD SETUP ao m a pm SAVE SETUP SAVE SETUP FILE FILE HWAME LEV_ MG FILE HAME LEW_Mil DELETE ALL SAUE SAVE LEU_Mi DEFRAGMENTAT IOH on Saved O K CATALOGUE Press EHTER to SAVE Press ENTER to SAVE FREE SPACE Press ESC to SKIF Press ESC to SKIP Press UF to EDIT SH rbelete SH gt Insert PRESS ANY KEY LOAD SETUP Displays during the attempt of overwriting the existing file changing the name and saving data All changes introduced to the setup file name during the edition are ignored after pressing the lt ESC gt push button This pressing causes the return to the list from which the SAVE option was entered The return after the edition to the line with the SAVE or SAVE NEXT text is possible after pressing the lt y gt push button The simplified edition consists in the addition at the end of the file name the natural number The increase by one of the number is made automatically After the saving operation execution the new setup file name is displayed and the instrument waits then for a reaction of the user any push button should be pressed except the lt SHIFT gt or the lt ALT gt one In the next attempt of saving data the new name is displayed in the FILE NAME line and that name is increased by one during the saving operation ao oa m oa SAVE SETUP SAVE SETUP FILE MAME LEW_MEy FILE MAME LEW_Mi SAVE a
37. XISTS SKIP a Display after the execution of MOVE FILES TO USB operation a and when the file already exists in the USB memory b A Notice After the execution of the MOVE FILES TO USB operation files which have been moved do not exist in the internal instrument s memory any more 7 42
38. after pressing the lt A gt lt v gt push buttons depending on the current settings of the instrument oa a oa Ho 12 45 FILE HAME BiJAHZ1 ae O1JANL9 O1JAN21 DATE 22 OCT 2666 TINE 16 22 46 PRESS ANY KEY pm o DOSE METER lt 3 SPL Fast Z E_8h 0 00Pa2h R I NO RESULTS ig 65 7 ap 28 8dB 6 BP a h F Profiles 5 G1Pazh File JAH2i Exemplary displays during the loading and checking the contents of a DOSE METER file In the case when in the DISPLAY MODES sub list the STATISTICS are activated and in the loaded file the statistic analysis was not included the display with NO RESULT message is presented in the graphical presentation of the statistical levels as it is given above o o FILE NANEL BRECS RES3 lt A KEY gt LEVEL HETER tSQUND3 Log FILE sloge7 Loaded I k DATE 28 OCT 2806 TIME 26 43 76 PRESS ANY KEY oa FILE INFO SPL Fast 2 FILE NAME RESS FILE SIZE 18646 DATE 28 OCT 2886 os TIME 26 43 26 a ELAPSED TIME 8 68 16 Profile PiiewRess Lag 53 7 dB Pr iaGms Exemplary displays during contents he of a LEVEL METER file 7 18 SVAN 953 USER MANUAL 7 4 Removing a file with the measurement results from memory DELETE The DELETE is used to remove a file from memory In order to enter the window the user has to select the DELETE text to display it inversely using the lt A gt lt w gt push buttons and then press the lt ENTER gt one LETE ALL DEFRAGMENTATION FILE
39. and lt SHIFT gt push butions are used for editing the name which cannot exceed eight characters including the starting special character which cannot be edited One can select the proper position of the character in the edited text using the lt lt gt lt gt gt push buttons 7 13 SVAN 953 USER MANUAL The available ASCII characters can be changed using the lt A gt or lt v gt push button pressed together with the lt SHIFT gt one Additionally the character can be also changed using the lt A gt or lt v gt push button this functionality is not available in the SAVE SAVE NEXT function The subsequent digits underline big letters and space appear on the display in the inversely displayed position after each pressing of the mentioned above push buttons The edition is finished after pressing the lt ENTER gt push button The edited name is compared with the file names existing in the catalogue In the case when the file with the same name already exists the special message is displayed and after pressing any character except the lt SHIFT gt or lt ALT gt one the instrument returns once more to the FILE NAME window a oa oa FILE NAME FILE NAME GRESH Goes INCORRECT FILE NAME SH Delete SH Insert PRESS ANY KEY SH2 Delete SH Insert Displays after the incorrect file name edition When the AUTO SAVE option is active V after starting the measurements by pressing the lt START STO
40. ation does not modify the contents of the fourth line of the DELETE window The date and time of the SAVE operation are displayed in the fifth and sixth line respectively The change of the current file with the unit step can be done after pressing the lt lt gt lt gt gt push buttons The first file is available after pressing the lt lt gt with lt SHIFT gt push button or lt v gt with lt SHIFT gt and the last one is displayed after pressing the lt gt gt with lt SHIFT gt push button or lt A gt with lt SHIFT gt TIME 05 40 44 TIME 6 52 12 TIME 07 36 56 Selection of the RESULT FILES to be deleted The selected file is deleted after pressing the lt ENTER gt push button The message is displayed after the successful end of the operation The instrument waits for the reaction of the user any push button should be pressed except the lt SHIFT gt and lt ALT gt one and after pressing a push button it returns to the DELETE sub list o P E iz JUL 2600F TIME 5 46 44 PRESS ANY KEY 7 IF SE gt lt ENTER gt gt CSOUHD I SETUP FILES F DATE 12 JUL 2687 TIME 6 52 12 Execution of the RESULT FILES deletion After the execution of the result files removing from the memory usually the FREE SPACE memory path MENU FILE FREE SPACE rests the same as before the deletion but TOTAL AVAILABLE memory is increased It is because erased file was somewhere in the file s space
41. bout 3 seconds in this case and the instrument returns to the SAVE SETUP window o Oo SAVE SETUP FILE HAME LEU META CALE MEASUREMENT IN PROGRESS Press ENTER to SAVE Press ESC to SKIF Press UF to EDIT Displays after the attempt to perform unavailable saving operation the return to the SAVE SETUP A Notice During the execution of the SAVE or SAVE NEXT function an additional window is displayed informing about the operation performed This window can be unnoticed by the user as it appears for the short time o oa a oa oa SAVE SETUP FILE FILE ae SET Di ELETE ALL SAUE HET SETA SETL PERRAGMENTATION Press ENTER to SAVE Saving Saved O K FREE SPACE Press ESC to SKIF Press UP to EDIT PRESS ANY KEY 7 LOAD SETUP Displays during and after the execution of the SAVE operation As it was already written it is not possible to store the data in the file which already exists when the REPLACE is not active path MENU FILE SAVE OPTIONS REPLACE The presented below sequence of displays illustrates the situation when during the name edition process the user selected the name that was used before but this time the REPLACE is active The setup file is overwritten the instrument displays a special message and waits for the reaction of the user any push button should be pressed except the lt SHIFT gt or the lt ALT gt one and after pressing a push button it returns to the FILE list 7 37
42. cification e the user s text stored together with the measurement data e the parameters and global settings e the special settings for profiles e the marker of the end of the file The other elements of the file structure depend on the type of the file SLM DOSE METER 1 1 OCTAVE logger and on the setting of SAVE STATISTICS path MENU FILE SAVE OPTIONS SAVE STATISTICS These elements are as follows e the main results from LEVEL METER mode e the results coming from DOSE METER mode e the results coming from 1 1 OCTAVE analysis mode e the statistical levels e the header of the statistical analysis e the results of the statistical analysis 7 1 SVAN 953 USER MANUAL e the settings of the instrument saved in the setup file e the header of the file from the logger e the data stored during the measurements in the logger s file A Notice The detailed description of all types of file structures is given in the Appendix B Storing the sound measurement results as files in the instruments FLASH DISC can be done by means of the FILE list In order to open the FILE list the user has to e press the lt MENU gt push button e select from the main list using the lt A gt lt y gt or lt lt gt lt gt gt push buttons the FILE text highlight it inversely e press the lt ENTER gt push button Main list the FILE text highlighted displayed inversely The FILE list contains the f
43. displayed in the first line of the LOAD window The name of the file is displayed in the second line its current number is presented in the first line The name of the file suggests the operation the file was created in The names in which the first character is are coming from the AUTO SAVE function The file with the default name Timer is coming from the AUTO SAVE function executed in the TIMER operation The other names suggest the SAVE SAVE NEXT function The type of the current file LEVEL METER 1 1 OCTAVE or DOSE METER is given in the third line If during the measurements which results are saved in the file the logger file was also created its name is displayed in the fourth line A Notice The logger file can be deleted from the instrument s memory in the FILE DELETE LOGGER FILES window and this deleting operation does not modify the contents of the fourth line of the LOAD window The date and time of the SAVE operation are displayed in the fifth and sixth line respectively The change of the current file with the unit step can be done after pressing the lt lt gt lt gt gt push buttons The first file is available after pressing the lt lt gt with lt SHIFT gt push button or lt v gt with lt SHIFT gt and the last one is displayed after pressing the lt gt gt with lt SHIFT gt push button or lt A gt with lt SHIFT gt ET FILE HAME DOSE SOUND SOUND LOG FILE DATE 12 JUL 2007 DATE
44. e DEFRAGMENTATION text in the FILE list using the lt A gt lt y gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt 7 28 SVAN 953 USER MANUAL SAVE SETUP DEFRAGMENTATION text highlighted displayed inversely in the FILE list 7 6 1 Merging result and setup files memory FILES DEFRAGMENT The FILES DEFRAGMENT is used to join the result and setup files memory In order to select this the user has to display inversely the FILES DEFRAGMENT text in the DEFRAGMENTATION sub list using the lt A gt or lt lt gt push button oa DEFRAGMENTATION FILES DEFRAGMENT LOGGER DEFRAGMEHT FILES DEFRAGMENT selected to the execution of the DEFRAGMENTATION operation The DEFRAGMENTATION sub list is closed and the instrument returns to the FILE list after pressing the lt ESC gt push button In order to continue the execution of the function one has to press the lt ENTER gt push button The instrument requests the confirmation of the operation The next pressing of the lt ENTER gt push button when the NO option is selected causes the closing of the window and the return to the DEFRAGMENTATION sub list The selection of the NO or YES option is possible using the lt lt gt lt gt gt push buttons The return to the DEFRAGMENTATION sub list is also possible after pressing the lt ESC gt push button oa oa FILES DEFRAGH FILES DEFRAGH Are you Are you sure EM sure Confirmation wi
45. e size 452 bytes plus 4 bytes containing the addresses of the previous file and 4 bytes containing the address of the next file all together 460 bytes The size of the logger files memory the LOGGER FREE SPACE and LOGGER AVAILABLE is not changed as the LOGGER path MENU INPUT MEASUREMENT SETUP was not activated a a a a FREE SPACE FREE SPACE FREE SPACE FREE SPACE FILES FREE SPACE TOTAL AVAILABLE FILES FREE SPACE TOTAL AVAILABLE 6 bytes F176826 b Y1If6s66 bytes TOTAL_AVAILABLE TOTAL_AVAILABLE 7176826 bytes 8246656 b 7176366 bytes LOGGER FREE SPACE LOGGER FREE SPACE 8246656 bytes 8246656 bytes FREE SPACE window before and after saving the EXAMP1 file Example 2 Let us assume the settings presented below where one measurement is performed with the integration period equal to 10 seconds nothing is saved in the logger but this time the statistics are also stored The measurement results are saved in the file named EXAMP2 oa oa a oa HEASUR SETUP SAVE OPTIONS FILE NAME FILE INFO START DELAY is aKAMP2 FILE NAME EXAMP2 INTEGRE PERIOD 193 A REF CYCLE LOGGER SAVE 127338 ELAPSED TIME 80 08 18 SHirDelete SH Insert Settings and the FILE INFO after the performed measurements The size of the file is now equal to 1932 bytes and it is visible in the FILE INFO window The detailed description of the level meter file structure is given in App B The EXAMP2 file saved in the result file
46. ed after pressing the lt ENTER gt push button when the LOAD text in the FILE list is displayed inversely selected using the lt A gt lt y gt or lt lt gt lt gt gt push buttons The return to the FILE list is possible after pressing the lt ESC gt push button o FILE SAVE SAUE OPTIONS DELETE DELETE ALL DEFRAGMENTATION FILE list with the LOAD text highlighted displayed inversely A Notice It is not possible to load the file during the execution of the measurements On such attempt the message MEASUREMENT IN PROGRESS is displayed for about 3 seconds After pressing the lt ENTER gt push button the instrument checks its current state In the case when the measurements are performed the file loading is impossible and the message is displayed O HEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress In the case when the instrument memory is empty no file is stored after entering the LOAD window the NO FILES text is displayed and the instrument waits for the reaction of the user The user should press then the lt ESC gt lt ENTER gt the instrument returns to the FILE list or lt START STOP gt push button the instrument starts the measurement 7 16 SVAN 953 USER MANUAL oa LOAD HO FILES Display during the execution of the LOAD operation The current number of the file and the total number of the saved files is
47. ew file name is displayed and the instrument waits then for a reaction of the user any push button should be pressed except the lt SHIFT gt or the lt ALT gt one In the next attempt of saving data the new name is displayed in the FILE NAME line and that name is increased by one during the saving operation o o o SAVE SAVE FILE MAME 2350CT1a SAUE HEXT 2380CT10 SAVE HET 2380CT11 Press ENTER to SAUE aoe Press ENTER to SALE saver Press ESC to SKIF Press ESC to SKIP Press UP to EDIT PRESS ANY KEY Fress UP to EDIT PRESS ANY KEY Displays in the simplified edition of the file name and saving operation execution The number can be changed from 0 to N The only limitation of the N value is the length of the file name which cannot be longer than eight characters In the case when such limitation is achieved and the instrument can not change automatically the file s name the only possibility is to edit new base file name A Notice The files can be overwritten the use of the same file name without any warning if the REPLACE option is switched on path MENU FILE SAVE OPTIONS REPLACE oa oa oa SAVE SAVE FILE MAME 123800TS FILE MAME 12350073 SAUE EXT 12380CT9 SAUE HET 12380CT9 7 LI Press ENTER to SALE Saved Es Press ENTER to SALE cis eed Press ESC to SKIF Press ESC to SKIP Press UP to EDIT PRESS ANY KEY Fress UP to EDIT PRESS ANY KEY Displays in the simplified edition of the file name sav
48. ferent types of files are saved together in the same space o o o Clearing Clearing EE q Ee Please wait Please wait Deleted O K PRESS ANY KEY Execution of the DELETE ALL operation for all type files simultaneously 7 6 Merging file space DEFRAGMENTATION The DEFRAGMENTATION is used to make the file memory continuous All new files are saved starting from the beginning of the free memory space The memory occupied by the deleted file assuming that the file was not the last one remains unused for the next files saving After the removing a file the files memory becomes discontinuous with unused parts which cannot be utilized in the future The situation is changed after the process called defragmentation During this process the files saved in the files memory are moved in order to obtain the continuous occupied space The files merging is performed separately for two parts of the instrument s memory the FILES DEFRAGMENT is used to join the result and setup files and LOGGER DEFRAGMENT is used in the case of the logger Before the defragmentation the FILES FREE SPACE and TOTAL AVAILABLE characterizing the result memory path MENU FILE FREE SPACE usually differ between each other After this operation these two parts are equal The same situation is in the case of the LOGGERFREE SPACE and TOTAL AVAILABLE characterizing the logger file In order to enter the DEFRAGMENTATION sub list the user has to select th
49. fter next pressing of the lt START STOP gt push button The measurement is stopped after the selected INTEGR PERIOD path MENU INPUT MEASUREMENT SETUP INTEGR PERIOD names of the next saved files are automatically incremented by one The same remarks are valid in this case as it was already stated in the description of the SAVE NEXT function 7 2 5 Direct access to the SAVE SAVE NEXT function DIRECT SAVE The DIRECT SAVE enables one to select the instrument s reaction on the simultaneous pressing of the lt ENTER gt and lt ALT gt push buttons If this option is not active after pressing these push buttons the SAVE window is accessed if the measurements are not performed If the option is active V after pressing the lt ENTER gt and lt ALT gt push buttons the results are saved in the file with the automatically incremented name and the proper message is displayed for a few seconds The proper setting of the DIRECT SAVE is done by pressing the lt lt gt lt gt gt push buttons Oo Oo _ SAVE OPTIONS _ __SAVE OPTIONS _ RAM FILE ELA LIA REPLACE 1E REPLACE 2 SAVE STATISTICS J UTO SAVE E UTO SAVE J Cv DIRECT SAVE SAVE MAX SPECT SAVE MAX SPECT C 7 o m SAVE OPTIONS SAVE OPTIONS REFLACE REFLACE SAVE OPTIONS sub list the selection of the DIRECT SAVE in DOSE METER After pressing the lt ENTER gt push button the selections made in any position of the sub list in particu
50. g the execution of the AUTO SAVE function oa oa oa CATALOGUE CATALOGUE CATALOGUE Exemplary result files associated with the same logger file amp LOG52 in the CATALOGUE window 7 8 Checking the free space in the memory FREE SPACE The FREESPACE is used to read out the free space in the FLASHDISC memory of the instrument In order to enter the window the user has to select the FREE SPACE text in the FILE list using the lt A gt lt y gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt one oa FILE DELETE ALL sk DEFRAGMENTATION CATALOGUE SAWE SETUP LOAD SETUP r FREE SPACE text highlighted displayed inversely in the FILE list The files memory in the instrument is divided into two separate parts One part is dedicated for saving the result and setup files and its size is equal to 7208736 bytes The second part is used for saving the logger files and its size is equal to 8257280 bytes The FREE SPACE window in the instrument after the execution of the DELETE ALL operation is presented below 7 33 SVAN 953 USER MANUAL a oa FREE SPACE FREE SPACE FILES FREE SPACE ei TOTAL AWAILABLE 8257280 bytes FREE SPACE window after the execution of the DELETE ALL operation The FREE SPACE window contains four numbers First two named FILES FREE SPACE and TOTAL AVAILABLE characterise the result and setup files memory The files are always saved starting from the beginning of the c
51. iles amp LOG96 and amp LOG9Q7 described in the examples are visible in the CATALOGUE window path MENU FILE CATALOGUE oa oa CATALOGUE CATALOGUE FILE Wa if ILE H 13 15 E MAME m E HAME EXAMP4 IL EXAMP 1 LEWEL METER SOUND LOG g DATE f JUN 2687 ME 12 23 12 CATALOGUE window with the files described in the examples 7 2 Controlling the data storing in the instrument s memory SAVE OPTIONS The SAVE OPTIONS sub list is used for the selection of the options of data storing in the FLASH DISC memory of the instrument The sub list is opened after pressing the lt ENTER gt push button when the SAVE OPTIONS text in the FILE list is displayed inversely selected using the lt A gt lt v gt or lt lt gt lt gt gt push buttons The return to the FILE list is possible after pressing the lt ESC gt push button FILE list with the SAVE OPTIONS text highlighted displayed inversely It is possible to write data into the same part of the memory starting all the time with the same address RAM FILE to replace the existing in the memory file by the new with the same name REPLACE to add to the results the statistics of the measurements SAVE STATISTICS to save automatically the results of the measurements AUTO SAVE The position of the sub list is changed after pressing the lt A gt lt y gt push buttons In order to confirm the selection the lt ENTER gt push button has to be pressed Such
52. ing and the saturation of that operation As it was already written the instrument attempts to save a file after pressing the lt ENTER gt push button The saving is not possible in the case when the instrument is measuring the signal The special message is displayed for about 3 seconds in this case and the instrument returns to the SAVE window 7 5 SVAN 953 USER MANUAL o 4 oa SAVE LE MAME 350C T6 FI MEASUREMENT SAWE HERAT et Press ENTER to SAVE Press ESC to SKIF Press UF to EDIT Displays after the attempt to perform unavailable saving operation and the return to the SAVE NEXT The presented below message is displayed after trying to execute the save operation in the case when no measurements were performed and there are no results to be saved The instrument then waits for the reaction of the user any push button should be pressed except the lt SHIFT gt or the lt ALT gt one and after pressing a push button it returns to the SAVE window a SAVE Ho results PRESS ANY KEY Display after the SAVE operation when there were no results for storing A Notice During the execution of the SAVE or SAVE NEXT function an additional window is displayed informing about the operation performed In the case of short files this window can be unnoticed by the user oa oa a oa SAVE FILE HAME 41JANe SAVE O1JAN21 OLJAN21 eae OFTIOWS 5 i eer 5 d O K aVilng ave DELETE Press ESC to SKIP DELETE AL
53. lar also in the DIRECT SAVE are confirmed and the sub list is closed In the case when the AUTO SAVE was active V after pressing the lt ENTER gt push button the FILE NAME window is opened for editing the names for the AUTO SAVE files The SAVE OPTION sub list is closed ignoring all settings made in it after pressing the lt ESC gt push button During the execution of the measurements pressing the lt ENTER gt and lt ALT gt push buttons causes disregarding the option set in the DIRECT SAVE that the message presented below is displayed o MEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress 7 15 SVAN 953 USER MANUAL The presented below displays illustrates the difference in the user interface execution after pressing the lt ENTER gt and lt ALT gt push buttons in the case when the measurements are not performed and the DIRECT SAVE is not active and active V oa a SAVE Press ENTER to SAVE 12380CTS i Saved 0 K SAVE MAs SPECT Press ESC to SKIP SAVE MIN SPECT Press UP to EDIT PRESS ANY KEY oa 12380CT9 i Saved O K SAVE MAX SPECT SAUE MIN SPECT PRESS ANY KEY Exemplary executions of the software with the DIRECT SAVE active 7 3 Loading the files with the measurement results LOAD The LOAD is used for loading data file from the FLASH DISC e g for the verification or comparison The position is open
54. le s name edition and start saving file pressing the lt ENTER gt push button or return to the FILE list pressing the lt ESC gt one The edition process is presented on the Figure below The displayed inversely character is currently edited The lt A gt lt v gt lt lt gt lt gt gt and lt SHIFT gt push buttons are used for editing the name which cannot exceed eight characters oa SAVE SETUP FILE MAME LER MET SAVE m SAVE SETUP FILE HAME SET SAUE MEXT Press ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF SH Delete SH i Insert J SH Delete SH Insert Display during the process of setting the character in the edited name One can select the proper character s position in the edited text using the lt lt gt lt gt gt push buttons o o m ao SAVE SETUP SAVE SETUP SAVE SETUP SAVE SETUP FILE MAME BEW_MET FILE MAME L3_MET FILE MAME LEQ MET FILE MAME LEVEMET SAVE SAVE SAVE SAVE Press ENTER to SAVE Press ENTER ta SAVE Press ENTER ta SAVE Press ENTER to SAVE Press ESC to SKIP Press ESC to SKIF Press ESC to SKIF Press ESC to SKIF SHirDelete SH Insert SHe Delete SH gt Insert J PSH Delete SH Insert PSH Delete SH Insert Display during the selection of the character s position to be edited The available ASCII characters can be changed using the lt A gt or lt v gt push button pressed together with the lt SHIFT gt one The subsequent digits underli
55. lt ENTER gt push button when the NO option is selected causes the closing of the window and the return to the DEFRAGMENTATION sub list The selection of the NO or YES option is possible using the lt lt gt lt gt gt push buttons The return to the DEFRAGMENTATION sub list is also possible after pressing the lt ESC gt push button 7 30 SVAN 953 USER MANUAL ao oa LOGGER DEFRAG LOGGER DEFRAG Are you Are you sure EM sure Confirmation windows during the execution of the LOGGER DEFRAGMENTATION operation After pressing the lt ENTER gt push button the instrument checks its current state In the case when the measurements are performed the execution of the DEFRAGMENTATION operation is not possible In such case the message is displayed and after few seconds instrument returns to the DEFRAGMENTATION sub list O q HEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress If the measurements are not performed after pressing the lt ENTER gt push button on the active YES option the instrument checks whether the used logger files memory is continuous or not If this memory is continuous the DEFRAGMENTATION operation is not executed and the special message is displayed The instrument waits for the reaction of the user any push button should be pressed except the lt SHIFT gt and lt ALT gt one and after pressing a push button it returns to the DEFR
56. measurements are performed the execution of the DELETE ALL operation is not possible In such case the message is displayed for few seconds and the instruments returns to the FILE list o 1 MEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress If the measurements are not performed the instrument requests the confirmation of the operation after entering this window after pressing the lt ENTER gt push button After next pressing the lt ENTER gt push button when the NO option is selected the window is closed and the instrument returns to the FILE list The selection of the NO or YES option is possible using the lt lt gt lt gt gt push buttons The return to the FILE list is also possible after pressing the lt ESC gt push button 7 26 SVAN 953 USER MANUAL ao a DELETE ALL DELETE ALL Displays with the confirmation window during the execution of the DELETE ALL operation All files from the selected type are deleted after the lt ENTER gt push button pressing when the YES option is selected The message is displayed after the successful execution of all stages of the operation The instrument waits for the reaction of the user any push button should be pressed except the lt SHIFT gt and lt ALT gt one and after pressing a push button it returns to the FILE list o a Clearing I Flease wait Deleted O K PRESS ANY KEY Execution of the DE
57. message ALREADY EXIST is presented on the display as well as the name of the file D a o a COPY FILES Files Copied O K PRESS ANY KEY b 26JANO ALREADY EXISTS SKIP a Display after the execution of COPY FILES TO USB operation a and when the file exists already b 7 13 Moving files to the USB memory stick MOVE FILES TO USB The MOVE FILES TO USB is used for moving files from internal instrument s memory to the USB memory stick The position is opened after pressing the lt ENTER gt push button when the MOVE FILES TO USB text in the FILE list is displayed inversely The return to the FILE list is possible after pressing the lt ESC gt push button D D a HOVE FILES RESULT FILES EE oa FILE FREE SPACE LOGGER FILES HL SETUP FILES pE DIRECTORY 25JAH r b Fress ENTER to MOVE SAUE SETUF LOAD SETUP DIRECTORY COPY FILES TO USB a FILE list with the MOVE FILES TO USB text selected a and the MOVE FILES window opened b The MOVE FILES TO USB sub list consist of three positions to choose RESULT FILES LOGGER FILES and SETUP FILES and DIRECTORY position with the name of the file in which the files from the internal memory of the instrument will be stored In order to activate required position the user has to place the special character in the line with the RESULT FILES LOGGER FILES or SETUP FILES text using the lt gt gt or lt v gt push button After next pressing the lt ENTER gt push but
58. n should be then pressed except the lt SHIFT gt and lt ALT gt one After pressing a push button the instrument returns to the DEFRAGMENTATION sub list o o o Defragmentation Clearing q I DEFRAGMENTATION Please wait Please wait finished PRESS ANY KEY Execution of the DEFRAGMENTATION operation The displays below illustrate the results of the FILES DEFRAGMENT after the execution the FILES FREE SPACE and TOTAL AVAILABLE become equal while the LOGGER FREE SPACE and LOGGER AVAILABLE remain unchanged oa a a a FREE SPACE FREE SPACE FREE SPACE FREE SPACE FILES FREE SPACE et TOTAL AWAILABLE 5 FILES FREE SPACE et TOTAL AWAILABLE Result of the FILES DEFRAGMENTATION operation 7 6 2 Merging logger files memory LOGGER DEFRAGMENT The LOGGER DEFRAGMENT is used to join the logger files memory In order to select this the user has to display inversely the LOGGER DEFRAGMENT text in the DEFRAGMENTATION sub list using the lt A gt or lt lt gt push button o DEFRAGMENTATION FILES DEFRAGMENT LOGGER DEFRAGMENT LOGGER DEFRAGMENT selected to the execution of the DEFRAGMENTATION operation The DEFRAGMENTATION sub list is closed and the instrument returns to the FILE list after pressing the lt ESC gt push button In order to continue the execution of the function one has to press the lt ENTER gt push button The instrument requests the confirmation of the operation The next pressing of the
59. name F b SH Delete SH Insert FREE SPACE SAUE SETUP LOAD SETUP a FILE list with the DIRECTORY text selected a and the DIRECTORY window opened b The FREE SPACE denotes the available free memory on the connected disk The DIR NO shows the number of the selected directory the 1 number and the number of the existing directories the 2 number In the case the directories do not exist these numbers are equal to zero The DIR NAME enables one to edit the directory name the 1 number or displays its name The help lines are placed at the display s bottom There are two ways of the current directory selection e the name edition in the DIR NAME line The default name consists of the day number and the month abbreviation The not existing directory will be created 7 39 SVAN 953 USER MANUAL e the selection of the existing directory by means of the lt lt gt lt gt gt push buttons pressed in the line with the DIR NO text The name of the selected directory is displayed in the DIR NAME line The selection is confirmed after pressing the lt ENTER gt push button which closes the window and returns to the FILE list The return to this list is also possible after pressing the lt ESC gt push button but the selection is not confirmed The selection of the directory is obligatory during the initialisation process In this case also the lt ESC gt push button confirms the settings D oO D oO D o D o DIRECTORY DIRE
60. ndow is opened after switching on the AUTO SAVE function and pressing the lt ENTER gt push button This window is closed and the SAVE OPTION sub list is displayed once more but with the AUTO SAVE function switched off after pressing the lt ESC gt push button o o SAVE OPTIONS FILE NAME SAVE OPTIONS ass REPLACE 0 SAVE STATISTICS 1 UTO SANE AC DIRECT SAVE Pe Fa SAVE MAS SPECT 0 J SHi Delete SH Insert SAVE MIN SPECT C 1 Displays during the execution of the AUTO SAVE switching on the FILE NAME skipping and return to the SAVE OPTION sub list When the integration period is too short for setting the AUTO SAVE option the following message appears on the display o THT PERTIOG TOO SHORT AUTO SAVE DISABLED PRESS AHY KEY sas Display after attempt of setting AUTO SAVE option with too short INT PERIOD The FILE NAME window is closed after pressing the lt ENTER gt push button with the confirmation of the AUTO SAVE function switched on and the user interface returns to the FILE list a SAUE OPTIONS FILE NAME a55 SH Delete SH Insert Displays during the execution of the AUTO SAVE switching on the FILE NAME confirmation and return to the FILE list The edition of the file name in the FILE NAME window is performed almost in the same way as it was described in the case of the SAVE SAVE NEXT function The displayed inversely character is currently edited The lt lt gt lt gt gt lt A gt lt v gt
61. ndows during the execution of the FILES DEFRAGMENTATION operation After pressing the lt ENTER gt push button the instrument checks its current state In the case when the measurements are performed the execution of the DEFRAGMENTATION operation is not possible In such case the message is displayed and after few seconds instrument returns to the DEFRAGMENTATION sub list o q MEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress If the measurements are not performed after pressing the lt ENTER gt push button on the active YES option the instrument checks whether the used result and setup files memory is continuous or not If this memory is continuous the DEFRAGMENTATION operation is not executed and the special message is displayed The instrument waits for the reaction of the user any push button should be pressed except the lt SHIFT gt and lt ALT gt one and after pressing a push button it returns to the DEFRAGMENTATION sub list 7 29 SVAN 953 USER MANUAL o DEFRAGMENTATION Unnecessary PRESS ANY KEY Message in the case when the execution of the DEFRAGMENTATION operation is unnecessary If there are conditions to execute the DEFRAGMENTATION operation it is done and the current progress is shown on the display After the successful execution the special message is displayed and the instrument waits for the reaction of the user Any push butto
62. ne big letters and space appear on the display in the inversely displayed position after each pressing of the mentioned above push buttons oa SAVE SETUP FILE WARE LER_LMET SAVE m SAVE SETUP FILE WANE LE MET SAVE a SAVE SETUP m SAVE SETUP FILE HAME LERL_MET SAUE FILE WARE LES_MET SAVE Press ENTER to SAVE Fress ESC to SKIF SHirDelete 5H gt Insert Press ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF SH Delete SH i Insert J SH Delete SH Insert Press ENTER to SAVE Press ESC to SKIF SHirDelete SH Insert oa SAVE SETUP FILE WARE LEM_MET SAVE oa SAVE SETUP FILE WARE LE MET SAVE m SAVE SETUP FILE WARE LEBLMET SAVE Press ENTER to SAVE Press ENTER to SAVE Fress ESC to SKIF Fress ESC to SKIF SH Delete SH i Insert SH Delete SH Insert Press ENTER to SAVE Press ESC to SKIF SHtrDelete SH Insert oa oa ao SAVE SETUP SAVE SETUP SAVE SETUP FILE WAME LES_MET FILE WAME LE MET FILE WAME LER_MET SAVE SAVE SAVE Fress ENTER to SAVE Press ENTER to SAVE Press ENTER to SAVE Press ESC to SKIF Press ESC to SKIF Press ESC to SKIF SH Delete SH Insert SH Delete SH i Insert JP SH belete SH Insert Display during the selection of the character 7 35 SVAN 953 USER MANUAL ao SAVE SETUP FILE HARE LE B SAVE SAVE SETUP FILE HAME LEM E SAVE m SAVE SETUP FILE WAME LE M B_M SAVE m SAVE SETUP FILE HAME LEM BME SAVE
63. o MEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress In the case when the setup files were not saved after entering the LOAD SETUP window the NO FILES text is displayed and the instrument waits for the reaction of the user The user should press then the lt ESC gt lt ENTER gt the instrument returns to the FILE list or lt START STOP gt push button the instrument starts the measurement a LOAD SETUP HO FILES Display during the execution of the LOAD SETUP operation 7 38 SVAN 953 USER MANUAL The current number of the setup file and the total number of the saved setup files is displayed in the first line of the LOAD SETUP window The name of the file is displayed in the second line its current number is presented in the first line The date and time of the SAVE SETUP operation is displayed in the fourth and fifth line respectively The change of the current file with the unit step can be done after pressing the lt lt gt lt gt gt push buttons The first file is available after pressing the lt lt gt with lt SHIFT gt push button or lt v gt with lt SHIFT gt and the last one is displayed after pressing the lt gt gt with lt SHIFT gt push button or lt A gt with lt SHIFT gt a ao oa ao LOAD SETUP LOAD SETUP LOAD SETUP LOAD SETUP FILE HO ME _ Ee FILE HAME LEW_METE i TSETU DATE Br HOW 2ae6 TIME 28 36 35
64. ollowing items SAVE SAVE OPTIONS LOAD DELETE DELETE ALL DEFRAGMENTATION CATALOGUE FREE SPACE SAVE SETUP LOAD SETUP DIRECTORY COPY FILES TO USB MOVE FILES TO USB 7 2 enables one to save the measurement results as a file in the instrument s memory enables one to set the options of the measurement result savings enables one to load to the working space of the instrument s memory the measurement results saved in a file enables one to delete a selected file from the instrument s memory enables one to delete all files from the instrument s memory enables one to consolidate the flash memory after deleting some files from it enables one to overview the catalogue of the files saved in the instrument s memory informs the user about the capacity of the instrument s memory still available for storing the measurement results enables one to save the setup as a file in the instrument memory enables one to load to the working space of the instrument s memory the selected setup saved in a file this position appears on the display when the USB Memory Stick is connected to the instrument it informs the user about connected device free space directory number directory name this position appears on the display when the USB Memory Stick is connected to the instrument it enables the user to copy files from internal memory of the instrument to the external USB Memory Stick this position appears on
65. ontinuous memory space The size in bytes of this space is given in the FILES FREE SPACE position If the result and setup files were not deleted from the memory the number of bytes displayed in the TOTAL AVAILABLE position is the same as in the FILES FREE SPACE However if some of them were deleted assuming that they were not the last saved the memory used by them is empty but it does not increase the continuous space In such case the number given in the TOTAL AVAILABLE position is greater than that in the FILES FREE SPACE The DEFRAGMENTATION operation which merges files should be used to increase the FREE SPACE The next two numbers given in the FREE SPACE window named LOGGER FREE SPACE and LOGGER AVAILABLE characterize the logger files memory where the saving mechanism is the same Therefore the numbers presented in the FREE SPACE window depend on the history of the measurements and the operations performed by the user a a FREE SPACE FREE SPACE FILES FREE SPACE TOTAL AVAILABLE 6 bytes 28873 TOTAL AVAILABLE T2H8736 bytes LOGGER FREE SPACE 82597208 bytes FREE SPACE window with the number depending on the measurements and operations performed The window is closed and the instrument returns to the FILE list after pressing the lt ENTER gt or lt ESC gt push buttons or it starts the measurements after pressing the lt START STOP gt one 7 9 Saving setup files in the instrument s memory SAVE SETUP The SAVE S
66. pressing closes also the opened sub list 7 2 1 Saving data starting from the same address RAM FILE The measurement data usually are saved in the different files in the flash memory of the instrument There is also possibility to save data in RAM file starting from the same address It means that each time the data are saved the previous file is overwritten This option is useful for the permanent monitoring and remote reading data from the instrument by means of any available interface with the proper period In order to read data saved in a RAM file one has to use 4 3 function described in details in App A The RAM FILE is switched on after placing the special character V in the inversely displayed position in the line with the RAM FILE text The activation or deactivation of the RAM FILE is done by pressing the lt lt gt lt gt gt push buttons oa ao SAVE OPTIONS SAVE OPTIONS AC eb C 7 SAVE MAX SPECT C 1 QUSAWE MAX SPECT SAVE OPTIONS sub list the selection of the RAM FILE in LEVEL METER 7 10 SVAN 953 USER MANUAL After pressing the lt ENTER gt push button the selections made in any position of the sub list in particular also in the RAM FILE are confirmed and the sub list is closed In the case when the AUTO SAVE was active V after pressing the lt ENTER gt push button the FILE NAME window is opened for editing the names for the AUTO SAVE files The SAVE OPTION is closed ignoring all set
67. s memory decreases the amount of the FREE SPACE and TOTAL AVAILABLE memory by the value of the file size 1932 bytes plus 4 bytes containing the addresses of the previous file and 4 bytes containing the address of the next file all together 1940 bytes The size of the logger files 7 7 SVAN 953 USER MANUAL memory the LOGGER FREE SPACE and LOGGER AVAILABLE is not changed as the LOGGER path MENU INPUT MEASUREMENT SETUP was not activated oa a a a FREE SPACE FREE SPACE FREE SPACE FREE SPACE FILES FREE SPACE TOTAL AVAILABLE FILES FREE SPACE TOTAL_AVAILABLE 6 bytes F176366 b Yifd426 bytes 17636 TOTAL_AVAILABLE TOTAL_AWAILABLE 7176366 bytes 8246656 b 7174426 bytes LOGGER FREE SPACE LOGGER FREE SPACE 8246656 bytes S246656 bytes FREE SPACE window before and after saving the EXAMP2 file Example 3 Let us assume the settings presented below where one measurement is performed with the integration period equal to 10 seconds the statistics are not saved but this time the LOGGER is activated On The measurement results are saved in the file named EXAMP3 ao o SAVE OPTIONS MEASUR SETUP FILE NAME ra ds if 18s CL 1 GEF STEP inans LOGGER MAME amp LOG96 SH Delete SH Insert Settings before the execution of the measurements All together eight different results coming from PROFILE 1 PEAK MAX MIN and RMS PROFILE 2 PEAK and RMS and PROFILE 3 MAX and MIN path MENU INPUT PRO
68. ssing the lt ENTER gt push button the FILE NAME window is opened for editing the names for the AUTO SAVE files The SAVE OPTION sub list is closed ignoring all settings made in it after pressing the lt ESC gt push button SVAN 953 USER MANUAL 7 2 3 Controlling the measurement statistics savings SAVE STATISTICS The SAVE STATISTICS is used to set self saving together with the measurement results the statistics of the measurements V or to switch off this possibility Together with the measurements 100 class statistics are calculated the values named from L01 to L99 The activation or deactivation of the SAVE STATISTICS is done by pressing the lt lt gt lt gt gt push buttons A Notice This position was created to save the memory of the instrument in the case when the knowledge of the statistics is not necessary Each registration of the statistics requires 600 bytes of the memory Ten selected statistic levels are always saved with the main results oa SAUE OPTIONS SAVE OPTIONS SAVE OPTIONS sub list the selection of the SAVE STATISTICS in LEVEL METER and in 1 1 OCTAVE analysis mode SAUE OPTIONS SAUE OPTIONS SAVE OPTIONS sub list the selection of the SAVE STATISTICS in DOSE METER After pressing the lt ENTER gt push button the selections made in any position of the sub list in particular also in the SAVE STATISTICS are confirmed and the sub list is closed In the case when the AUTO SAVE was
69. successful end of the operation The instrument waits for the reaction of the user any push button should be pressed except the lt SHIFT gt and lt ALT gt one and after pressing a push button it returns to the DELETE sub list o ILE HO LOG FILE amp LOG amp LOG Cog SIZE 490 B Heuctes O E lt ANY PUSH BUTTON gt PCi PERE MAX MIH RMS PRESS ANY KEY oa DELETE RESULT FILES LOGGER FILES SETUP FILES POSo MIN RMS Execution of the LOGGER FILES deletion After the execution of the logger files deletion from the memory usually the logger free space rests the same as before the deletion but the total logger available memory is increased It is because erased file was somewhere in the file s space The file is no longer accessible but the recuperated memory is still unused for the next saving This memory becomes available after the defragmentation process path MENU FILE DEFRAGMENTATION LOGGER DEFRAGMENT in which all files are moved to the continuous space It can be illustrated on the figures below by erasing from the memory logger file named amp LOG8 626 B The presented there FREE SPACE window comes from the FILE list mi LOGE Deleted O K PCSa2MIN RMS PRESS ANY KEY Execution of the amp LOG8 file erasing from the logger memory 7 22 SVAN 953 USER MANUAL a oa a a FREE SPACE FREE SPACE FREE SPACE FREE SPACE FILES FREE SPACE ei TOTAL AVAILABLE FILES FREE SPACE ei TOTAL AVAILABLE
70. tings made in it after pressing the lt ESC gt push button The RAM FILE functionality is available only in the LEVEL METER and 1 1 OCTAVE analysis mode In the DOSE METER mode the line with the RAM FILE text does not appear on the display after entering the SAVE OPTIONS sub list 7 2 2 Replacement of the existing files by the new ones REPLACE The result of the attempt to save the file with the name which already exists in the memory depends on the setting of the REPLACE It is possible to erase the old file and to save the new one with the same name if the position is active V The activation or deactivation of the REPLACE is done by pressing the lt lt gt lt gt gt push buttons oa SAUE OPTIO SAVE OPTIONS NS iD E KEZI 2 if if SAVE MAS SPECT SAVE OPTIONS sub list the selection of the REPLACE in DOSE METER The message is displayed that such operation is not available in the case when this position is not active cf the description of the SAVE In the other case the existing file is overwritten oa oa 12380CTS 12380CTS is used Saved O K PRESS ANY KEY PRESS ANY KEY Displays during the file saving when the REPLACE is switched off and on After pressing the lt ENTER gt push button the selections made in any position of the sub list in particular also in the REPLACE are confirmed and the sub list is closed In the case when the AUTO SAVE was active V after pre
71. tion of the NO or YES option is possible using the lt lt gt lt gt gt push buttons The return to the FILE list is also possible after pressing the lt ESC gt push button 7 27 SVAN 953 USER MANUAL oa oa DELETE ALL DELETE ALL Displays with the confirmation window during the execution of the DELETE ALL operation All files from the selected type are deleted after the lt ENTER gt push button pressing when the YES option is selected The message is displayed after the successful execution of all stages of the operation The instrument waits for the reaction of the user any push button should be pressed except the lt SHIFT gt and lt ALT gt one and after pressing a push button it returns to the FILE list pm o pm Defragmentation Clearing B E q E eaten Please wait Please wait Deleted O K PRESS ANY KEY Execution of the DELETE ALL operation in the case of SETUP FILES selection A Notice The execution of the DELETE ALL function described above takes place in the case when only one type of the files is selected in the DELETE ALL sub list If all types are selected simultaneously and the logger result and setup are saved only Clearing operation is performed but two times one time in logger files memory and one time in result and setup files memory After clearing all memory the defragmentation is not done The memory merging is done only in the case of setup and results memory as these two dif
72. ton when no option is selected the window is closed and the instrument returns to the FILE list The return to the FILE list is also possible after pressing the lt ESC gt push button D ao H VE FILES RESULT FILES Ov D ao HMOUE FILES RESULT FILES D ao HMOUE FILES LOGGER FILES Tv SETUP FILES al DIRECTORY 25 7AH TUP FILES iL DIRECTORY 25 JAH Press ENTER to MOVE b Fress ENTER to MOVE a Fress ENTER to MOVE RESULT FILES selection to the execution of the MOVE FILES TO USB operation a the RESULT LOGGER and SETUP files selected to the execution of the MOVE FILES TO USB operation b 7 41 SVAN 953 USER MANUAL After pressing the lt ENTER gt push button the instrument checks its current state In the case when the measurements are performed the execution of the MOVE FILES TO USB operation is not possible In such case the message is displayed for few seconds and the instruments returns to the FILE list o q MEASUREMENT IN PROGRESS Display after the attempt to perform an unavailable operation during measurement in progress If the measurements are not performed the instrument starts the operation After the operation Files Moved O K message is presented on the display If the file already exist in the USB memory stick the message with the name of the file and ALREADY EXIST text is presented on the display D a D a MOVE FILES Files Hoved 0 K PRESS ANY KEY b 26JANO ALREADY E
73. utton 7 25 SVAN 953 USER MANUAL oa oa DELETE ALL DELETE ALL Displays with the confirmation window during the execution of the DELETE ALL operation All files from the selected type are deleted after the lt ENTER gt push button pressing when the YES option is selected The message is displayed after the successful execution of all stages of the operation The instrument waits for the reaction of the user any push button should be pressed except the lt SHIFT gt and lt ALT gt one and after pressing a push button it returns to the FILE list o o o Defragmentation Clearing q q iee ei Please wait Please wait Deleted 0 K PRESS ANY KEY Execution of the DELETE ALL operation in the case of RESULT FILES selection 7 5 2 Deleting all logger files LOGGER FILES In order to activate the position the user has to place the special character in the line with the LOGGER FILES text using the lt gt gt push button The DELETE ALL sub list is closed and the instrument returns to the FILE list after pressing the lt ESC gt push button In order to enter the DELETE ALL window one has to press the lt ENTER gt push button ao oa DELETE ALL DELETE ALL RESULT FILES RESULT FILES H i LOGGER FILES i TUF FILES KESI Press ENTER to DELETE LOGGER FILES selected to the execution of the DELETE ALL operation After pressing the lt ENTER gt push button the instrument checks its current state In the case when the

Download Pdf Manuals

image

Related Search

Related Contents

取扱説明書 - 日本プラントシーダー  製品に起因する事故ではないと判断する案件(PDF形式:4577KB)  測定インピーダンス値が 治具の荷重状態に依存する 小型  ServiceManual UR5 en 3.0  PCL6045B_Application Manual 050713  HP NM965AA  °OO - Saab Sport Club  Ventilador de Pressão PositiVa Bi  取扱説明書  PDFをダウンロード  

Copyright © All rights reserved.
Failed to retrieve file