Home

Scanner Installation Guide

1. User s Manual in the Microtek Software CD 4 _ Unlock Scanner A Locate two locking screws at the right corner of the front panel of the scanner and at the left corner of the back panel of the scanner Using a flat head screwdriver pass through a round circle at the outer shell of the scanner and insert a hollow side of the locking screw 1 push to the end with force and 2 turn the locking screw counterclockwise 90 degrees to the unlock position a When successfully unlocked the screw will push out a little protruding slightly from the front of the scanner Unlocked NOTE To lock the scanner for shipping and other reasons refer to the User s Manual in 2 Turn counterclockwise the Microtek Software CD 5 _ Connect Scanner _ Position Materials Lift up the upper cover to a Place the scan proper position to prevent hands materials face down To the power cord hurt from a sudden drop of it on the scanner glass A Connect one end of the power cord to the right a Aver right of the scanner EPERE side of the scanner and plug the other end into a S Center the top of it Ch long the ruler on the ower source along p la scanner B Press the power button to turn the scanner on When the scanner is turned on the power button light the green power light is on as well Attention To the Hi Speed USB cable When closing the upper cover watch C Connect one end of the US
2. B cable to your EeP O maane computer and connect the other end to the hurting your hands scanner by quick movement Launch ScanWizard LS Do You Need Assistance After the software and scanner have been successfully If your package is missing items or you have questions toward the installed double click the ScanWizard LS USB icon on the installation of the scanner please call Microtek Customer Service desktop to launch ScanWizard LS USB software Department Refer to the User s Manual in the Microtek Software CD toward how to scan materials and how to use software Copyright 2014 Microtek International Inc http www microtek com f 149 005010 A October 2014 M IC ROTER
3. Scanner Installation Guide 7 _ Unpack Contents 3 _ Stabilize Scanner Unpack your scanner package and check i A Locate the Elevating Knobs next to four casters at the bottom of for major components the scanner A Scanner B Hi Speed USB 2 0 cable C Power cord D Software CD Elevating Knob 2 e Install Software Black pedestal Important You must install software before connecting your scanner Always close any open programs and turn off Antivirus utilities before installing software Spin the red gear of the Elevating Knob clockwise You will see that a black pedestal below the Elevating Knob moves down gradually Continue to spin the red gear until the black pedetal is A Place the Microtek Software CD Nc stabilized on the ground into a drive and follow the on I screen instructions to install the e X scanner driver and software No Spin the elevating knob clockwise until the black NOTE If the Microtek Software Installer pedestal is moved down and screen does not come up automatically stabilized on the ground double click the following in succession My l Computer the CD ROM icon then Setup C Repeat the step B utill all of the four pedestals have been moved exe to start the installer program down and stabilized on the ground Red gear Restart your computer at the end of all software installation NOTE If you need to move your scanner for transporting or other reasons refer to the

Scanner Installation Guide

Contents

Download Pdf Manuals

Related Search

Related Contents