IR Speed Dome
Contents
1. MIK VISION IR Soeed Dome Quick Guide UD 6L0201B1021A01 www hikvision com IR Speed Dome Quick Guide Thank you for purchasing our product If there are any questions or requests please do not hesitate to contact the dealer This manual applies to IR speed dome This manual may contain several technical incorrect places or printing errors and the content is subject to change without notice The updates will be added to the new version of this manual We will readily improve or update the products or procedures described in the manual DISCLAIMER STATEMENT Underwriters Laboratories Inc UL has not tested the performance or reliability of the security or signaling aspects of this product UL has only tested for fire shock or casualty hazards as outlined in UL s Standard s for Safety UL60950 1 UL Certification does not cover the performance or reliability of the security or signaling aspects of this product UL MAKES NO REPRESENTATIONS WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT 0500001030514 IR Speed Dome Quick Guide Regulatory Information FCC Information FCC compliance This equipment has been tested and found to comply with the limits for a digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the eq2. European Union See the product documentation for specific battery information The battery is marked with this symbol which may include lettering to indicate cadmium Cd lead Pb or mercury Hg For proper recycling return the battery to your supplier or to a designated collection point For more information see www recyclethis info IR Speed Dome Quick Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss The precaution measure is divided into Warnings and Cautions Warnings Neglecting any of the warnings may cause serious injury or death Cautions Neglecting any of the cautions may cause injury or equipment damage Warnings Follow these safeguards Cautions Follow these precautions to prevent serious injury or death to prevent potential injury or material damage A Warnings All the electronic operation should be strictly compliance with the electrical safety regulations fire prevention regulations and other related regulations in your local region Please use the power adapter which is provided by normal company The standard of the power adapter is 24VAC 10 or 12VDC 10 depending on models The power consumption cannot be less than the required value Do not connect several devices to one power adapter as adapter overload may cause over heat or fire hazard Please make sure that the power has been disco
3. SD card slot of the network speed dome Remove the slot cover and insert the SD card into the SD card slot then install the slot cover back IR Speed Dome Quick Guide 2 Installation Before you start Check the package contents and make sure that the device in the package is in good condition and all the assembly parts are included Please make sure the wall is strong enough to withstand more than 8 times the weight of the dome and the mount For cement wall you need to use the expansion screw to fix the mount The long arm wall mount is taken as the example for following mounting steps Note Do not drag the speed dome with its waterproof cables as shown in Figure 1 1 otherwise the waterproof performance is affected Steps Protectiveg Sticker Figure 2 1 Protective Sticker 2 Drill 4 screw holes in the wall according to the holes of the mount 3 Secure the wall mount to the wall with the M8 expansion screws IR Speed Dome Quick Guide Figure 2 2 Secure the Mount Notes The mount in Figure 2 2 is the recommended mount for this series of speed dome and a pendent adapter is required if any other mount is selected See Figure 2 3 1 The dimension of pendant adapter is G15 s Pendent j adapter Figure 2 3 Pendent Adapter 4 Install the speed dome to the mount 1 Hang the
4. mask to the same subnet as of your PC Refer to the following introductions to set IP address with SADP software Search active devices online Search online devices automatically After launch the SADP software it automatically searches the online devices every 15 seconds from the subnet where your computer locates It displays the total number and information of the searched devices in the Online Devices interface Device information including the device type IP address port number gateway etc will be displayed 10 IR Speed Dome Quick Guide fresh Total number of online devices 1 Retes Modify Network Parameters iD Device Type IPv4 Address Port Software Version IPv4 Gateway Serial No IP Address 001 DS XXXX XX 192 0 0 64 8000 192 0 0 1 Port Subnet Mask IPv4 Gateway Address Gateway IPv6 Prefix Length Serial No Note Enter the admin password of the device before you save the network parameters Restore Default Password Note Serial code is a series of characters combined by the start time and the serial number of the device Figure 3 2 Search Online Devices Note Device can be searched and displayed in the list in 15 seconds after it goes online it will be removed from the list in 45 seconds after it goes offline Search online devices manually Refresh f You can also click J to refresh the online d
5. evice list manually The newly searched devices will be added to the list Note You can click or on each column heading to order the information gt gt you can click to show the device table and hide the network parameter panel on the right side or click to show the network parameter panel L Modify device information Steps 1 Select the device to be modified in the device list as shown in Figure 3 3 The network parameters of the device will be displayed in the Modify Network Parameters panel on the right side as shown in Figure 3 4 2 Edit the modifiable network parameters e g IP address and port number 3 Enter the password of the admin account of the device in the Password field and click to save the changes 11 IR Speed Dome Quick Guide Total nunber of online devices 1 Refresh ip Device Type IPv4 Address Port Software Version iPv4 Gateway Serial No 001 DS XXXX XX 192 0 0 64 8000 VX X XbuildXXXX 192 0 0 1 XX XXXX XXXXXXXXXX Figure 3 3 Select a Device Modify Network Parameters IP Address 192 0 0 64 Port 8000 Subnet Mask 255 255 0 0 IPv4 Gateway 192 0 0 1 IPv6 Address IPveGateway IPv6 Prefix Length Serial No XXXXXXXXXXXXXXXXXXXXX P assword Save 9 Note Enter the admin password of the device before you save the network parameters Figure 3 4 Modify Network Parameters 3 Enter the IP address of network speed dome in the address field of the web b
6. nnected before you wire install or dismantle the soeed dome When the product is installed on wall or ceiling the device shall be firmly fixed if smoke odors or noise rise from the device turn off the power at once and unplug the power cable and then please contact the service center if the product does not work properly please contact your dealer or the nearest service center Never attempt to disassemble the speed dome yourself We shall not assume any responsibility for problems caused by unauthorized repair or maintenance A Cautions Do not drop the dome or subject it to physical shock and do not expose it to high electromagnetism radiation Avoid the equipment installation on vibrations surface or places subject to shock ignorance can cause equipment damage Do not place the dome in extremely hot cold dusty or damp locations otherwise fire or electrical shock will occur The operating temperature should be 30 C 65 C The dome cover for indoor use shall be kept from rain and moisture IR Speed Dome Quick Guide Exposing the equipment to direct sun light low ventilation or heat source such as heater or radiator is forbidden ignorance can cause fire danger Do not aim the speed dome at the sun or extra bright places A blooming or smear may occur otherwise which is not a malfunction however and affecting the endurance of sensor at the same time Please use the provided glove when open u
7. onfiguration x 4 3 Please click here to download and install the plug in Close the browser when installing the plug in Message from webpage m Q New version of plug in is detected Update it Figure 4 2 Download Plug in amp Setup Web Components Setup has finished installing Web Components on your computer Click Finish to exit Setup Figure 4 3 Install Plug in 6 Reopen the web browser after the installation of the plug in and repeat the above steps 2 4 to login Note For detailed instructions of further configuration please refer to the user manual of network dome 14 First Choice for Security Professionals Hikvision Digital Technology Co Ltd All Rights Reserved
8. p the dome cover avoid direct contact with the dome cover because the acidic sweat of the fingers may erode the surface coating of the dome cover Please use a soft and dry cloth when clean inside and outside surfaces of the dome cover do not use alkaline detergents Please keep all wrappers after unpack them for future use In case of any failure occurred you need to return the speed dome to the factory with the original wrapper Transportation without the original wrapper may result in damage on the speed dome and lead to additional costs Do not stare at infrared LED closely to avoid hurting your eyes when the infrared lights are on IR Speed Dome Quick Guide Table of Contents QV GN VIO 6 PAA NOUN reso og E 7 3 Setting the Network Dome over the LAN csssccsssccssssccsssccsssccsssccsssccsssessssesenees 10 4 Accessing via Web Browser ee 13 IR Speed Dome Quick Guide 1 Overview Please make sure the power of the speed dome has been disconnected before connecting the cables The cable interfaces of network speed dome are shown in following figure left The cables are distinguished by different colors The labels attached on the cables are for identification Figure 1 1 Overview Table 1 1 Overview wo oeseri Network Cable Audio Cable Alarm Out 5 ideo cable ves Note 8 is the
9. rowser to view the live video Notes The default value of the IP address is 192 0 0 64 The default user name of administrator is admin and password is 12345 For accessing the network speed dome from different subnets please set the gateway for the network speed dome after you log in 12 IR Speed Dome Quick Guide 4 Accessing via Web Browser System Requirement Operating System Microsoft Windows XP SP1 and above version Vista Win7 Server 2003 Server 2008 32bits CPU Intel Pentium IV 3 0 GHz or higher RAM 1G or higher Display 1024x768 resolution or higher Web Browser Internet Explorer 7 0 and above version Apple Safari 5 02 and above version Mozilla Firefox 3 5 and above version and Google Chrome 8 and above version Steps 1 Open the web browser 2 In the browser address bar input the IP address of the network speed dome e g 192 0 0 64 and press the Enter key to enter the login interface 3 Input the user name and password The default user name is admin and the default password is 12345 4 Click Login English UserName admin Password eeeee Login Figure 4 1 Login Interface 5 Install the plug in before viewing the live video and managing the speed dome Please follow the installation prompts to install the plug in Note You may have to close the web browser to finish the installation of the plug in 13 IR Speed Dome Quick Guide Live View Playback Log C
10. safety rope to the speed dome and then hook to the mount as shown in Figure 2 4 2 Route the cables of the speed dome through the wall mount 3 Connect the corresponding video audio power RS 485 alarm cables 4 Loosen the two lock screws on the wall mount 5 Install the speed dome to the mount and secure the speed dome by rotating the speed dome clockwise 6 Secure the two lock screws with the Allen wrench IR Speed Dome Quick Guide IR Speed Dome Quick Guide 3 Setting the Network Dome over the LAN To view and configure the speed dome via LAN Local Area Network you need to connect the network speed dome in the same subnet with your PC Then install the SADP or the client software to search and change the IP of network speed dome The following figure shows the cable connection of network speed dome gt ois Speed Dome Switch Network NVR Figure 3 1 Wiring over LAN Set the IP address of the speed dome for accessing via LAN Steps 1 To get the IP address you can choose either of the following methods Use SADP a software tool which can automatically detect network speed dome in the LAN and list the device information like IP address subnet mask port number device serial number device version etc shown in Figure 3 2 Use client software to list the online devices Please refer to the user manual of client software for detailed information 2 Change the IP address and subnet
11. uipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense FCC Conditions This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation EU Conformity Statement This product and if applicable the supplied accessories too are marked 4 with CE and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006 95 EC the EMC Directive 2004 108 EC 2002 96 EC WEEE directive Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier upon the purchase of equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info 2006 66 EC battery directive This product contains a battery that cannot be disposed of as unsorted municipal waste in the
Download Pdf Manuals
Related Search