User manual
Contents
1. 2 5442N 113 91E 0000 After the setup is successful the setting mobile phone will receive a piece of config ok command Then when the ward leaves this area the terminal will send the alarming information of being out of the fence to the center number 2 Fence Reading Function Send commands to the terminal command number 752 user password 4 digits after the command is set successfully the terminal will read the data of the module fence working status and return message to the sending mobile phone or PASSWORD ER if the password is wrong For example 752 0000 Return open 1 lat 11456 209400 Ing 2233 470100 distance 500 time 5 status 2 Where open 1 indicates fence open Open 0 indicates fence closed lat 11456 209400 latitude Ing 2233 470100 longitude distance 500 fence radius time 5 sampling interval status 2 terminal has obtained valid satellite data fence works normally status 1 fence open but there are no valid satellite data have been received status 0 no electronic fence is set 3 Server center address command Command name 803 server address port password Example 803 www abcd com 003 0000 4 Function of Canceling Fence Command name command number 760 user password 4 digits Example 760 0000 After the terminal receiving this command all fence settings will be cancelled Advice Do not set GSM fence and GPS fence at the same time 12 5 2 10 Auxiliary Func2. User Manual for GPS Safety Monitoring Mobile Phone 1 Welcome to use our mobile phone Thank you for choosing our GPS safety monitoring mobile phone This mobile phone represents the perfect combination of GSM and GPS technologies It is characterized by streamline fashionable profile design simplicity and elegance it fully shows the fashionable personality With large capacity phonebook SMS alarm clock call center phone settings FM radio GPS hang up state emergency alarm etc it can help you enjoy a rich and colorful life 2 1 Check the Phone and Accessories Unpack the mobile phone package and check if the phone and its accessories are complete In case of any incompletion please consult the local distributor 1X mobile phone e 1 x battery e 1x charger e 1x user manual e 1x headset optional e 1x certificate of conformity 2 2 Mobile Phone Specifications 2 2 1 Accessory Specifications Lithium battery Normal voltage 3 7V 1300MAH Charging voltage 4 2V Charger Input AC220V 20 50Hz 50mMA Output DC5 0V 500mA Charging time 12h for the first three times and 3 6h thereafter 2 2 2 Technical Specifications Work frequency 850 900 1800 1 900MHZ Continuous call About 5h duration Continuous 7 days GSM standby standby duration Dimensions 118mm 63mm 27mm Weight 110g including battery The standby duration and call dur
3. ation depend on the local network and GPS application 2 3 Appearance 2 4 3 SN Name Functional Description 1 FM antenna When listening to FM radio you need to pull out the FM antenna 2 Volume key During call listening to FM radio etc to adjust volume just press this key 3 FM shortcut key Push the key upward to open FM radio and downward to close it Answer and dial key Dial a call or receive a call in standby press this key to enter the latest call log 5 Flashlight Push the key upward to open the flashlight 6 Receiver Voice ring tone and FM output 7 Screen 8 Direction key Adjust menus the left and right direction keys are for Enter and Back 9 End key End or refuse a call In operation back to the previous level i e Cancel or Back On the switch off state press this key long to switch on the phone On the standby interface press this key long to switch off the phone On the non standby interface press this key long to back to the standby interface in shortcut way 10 Keypad On the Edit interface press key to input special symbols and press the key to switch input modes 11 MIC 12 I O port For charging and headset 13 Lanyard port For lanyard 14 Flashlight switch Upward to switch on the flashlight downward to switch off the flashlight 15 Keypad lock switch Upward to unlock downward to lock the keypad except SOS k
4. e battery for above 12h for the first three times in order to ensure the service life of the battery The charging with the phone on will not affect the normal call dial and reception but consume more power than usual and thus it will take more time to charge the battery 3 Basic Operation 3 1 Switch on off Switch on Press the Switch on Key to switch on the phone and enter the standby interface Tips 1 If the SIM protection is activated you need to input SIM password press the Left Function Key to confirm and enter the standby interface 2 If the phone protection is activated you need to input the phone password press Left Function Key to confirm and enter the standby interface Switch off On the standby interface press the Switch off Key to switch off the phone 3 2 Standby Shortcut Tips On every edit and function interface press the Switch on Key to directly back to the standby interface On the standby interface press the Left Function Key to enter the main menu On the main menu press the Up Down Direction Key to move and select the corresponding menus and then press the Left Function Key to enter the corresponding module On the standby interface press the Dial Key to enter the list of the latest received dialed calls On the standby interface press the Up Direction Key to enter the interface of creating SMS On the standby interface press the Down Direction Key to enter the alarm cloc
5. ealizes real time tracking Can position the holder by call or mobile phone SMS In emergency press the SOS button to have an accurate positioning Supports SOS key alarm in switch off state 5 2 Commands Corresponding to and Operation Method of Basic Functions 5 2 1 Location Inquiry SMS Inquiry Send the command 666 encrypted password to the terminal then the terminal will return a piece of latitude and longitude message and a piece of detailed address message For example 666000 5 2 2 Setup of Center Number Set the center number by means of SMS through mobile phone After the setup is successful then the mobile phone sending the SMS will receive the config OK response message from the terminal Command format 710 center number user password For example 710 134xxxxxxxx 0000 Note All alarming information thereafter including SOS low power electronic fence etc will be returned to such number 5 2 3 Alarm number setting function Send the command in form of SMS through mobile phone to the terminal After the setup is successful after sending the SMS the mobile phone will receive the config OK response message returned from the terminal Setup format 711 Call 1 Call 2 Call 3 OOOO For example 7114 13512345678 1 36123456 78 137 123456 78 0000 Send command to the terminal The terminal will return confirmation message to the mobile phone Description After the setting is successful press
6. ed location of the phonebook and the content displayed on the list 4 2 SMS This phone supports the delivery of SMS to many parties totally you can send SMS to 10 recipients at a time Every SMS may contain at most 58 Chinese characters or 116 English words digits and symbols 4 2 1 Create SMS 1 Create Via Main Menu SMS gt Create enter the SMS editing interface for SMS editing refer to the input mode 2 Choose Number After the content of the SMS is input completely press the Left Function Key to select Send to input the phone number Or press the Left Function Key options to choose phonebook enter the page of selecting phone number on the phonebook press the Enter Key Left Function Key to introduce the number of such contact 3 Select and Save You may save the edited SMS into the draftbox 4 Send After the recipient number is input press the Left Function Key to send the SMS 4 2 2 Inbox 1 Via Main Menu SMS Inbox display the list of the received SMS 2 Choose the SMS item and then press the Left Function Key to choose the operation item and carry out it 4 2 3 Outbox Via Main Menu SMS Outbox display the SMS having been sent successfully 4 2 4 SMS Settings Via Main Menu SMS gt SMS Settings you may have such options as mode settings status settings preferred location preferred connection 4 3 Call Center Call log includes missed calls received calls and dialed calls You
7. ey 16 SOS key In switch on off state press this button for 3 for SOS refer to 7 2 2 7 2 3 for details 2 4 How to Insert the SIM Card Please insert the SIM card along its SIM card slot direction align the cut corner of the SIM card with the cut corner of the slot and make sure that the SIM card has been inserted into its proper position 2 5 Battery 2 5 1 Install the Battery Open the battery cover insert the SIM card properly install the battery and then restore the battery cover 2 5 2 Charge the Battery About charging 1 Insert the charging plug of the charger into the charging port of the phone and the other end of the charger into the 220V power socket In such case the phone backlight will be lit up the battery icon will flicker and charging will be displayed Charged 2 When the battery icon of the phone stops flickering it will indicate that the charging is over and the screen will display Charged Charge with the phone on 1 Insert the charging plug of the charger into the charging port of the phone and the other end of the charger into the 220V power socket In such case the phone backlight will be lit up the battery icon will flicker and the battery icon on the right of the screen will start flickering e Tips For the battery of the newly bought mobile phone or the new replacing battery do not charge it until it is completely used up It is recommended to charge th
8. ity depends on the actual SIM card Via Main Menu Phonebook or on the standby interface press the Left Direction Key to enter the phonebook in a shortcut manner 1 Search Contacts You may search phone numbers according to names You need not to input all of the name but part to search the phone number 2 Add Contacts You may add new contacts into the phonebook 3 Copy All You may copy the phone numbers on the SIM card to the phone or vice versa 4 Delete You may delete the phone phonebook or the SIM phonebook 5 Phonebook You may set the preferred storage location or phone list Settings 4 1 1 Search Search the contacts in the phonebook according to names Fast search In the phonebook list you may localize the contact according to the first Pinyin letter of the name or the first letter of the English name For example in phonebook list to search Li Si press the 5 Key JKL three times to localize the contacts beginning with L 4 1 2 Add Contacts 1 Enter the phonebook and choose Add to add new contacts into the phonebook 2 The storage location includes phone phonebook and SIM phonebook If phone phonebook on the editing page of adding contacts in turn input name and phone number 3 Press the Left Function Key to save the contacts 4 1 3 Copy Copy You may copy all numbers on the SIM card to the phone or vice versa 4 1 4 Settings Settings You may set the preferr
9. k menu 3 3 Keypad Lock In order to avoid touching the keypad carelessly and thus causing wrong operation you may lock the keypad of the phone In switch on state push the keypad lock switch downward to lock the keypad In the locked keypad state push the keypad lock switch upward to unlock the keypad 3 4 Adjust Receiver Volume Press the left volume adjustment key to adjust the receiver volume 3s after the volume is adjusted the screen will automatically back to the call duration page 3 5 Word Input GPS safety monitoring mobile phone provides such input modes for you as intelligent Pinyin input letter input English input number input and symbol input The defaulted input mode is the intelligent Pinyin input mode You may set input mode on the phone Press the Key to switch input modes and the input state will be displayed on the right upper corner of the screen The keypad definitions in the input mode are as follows Enter Key Confirms the selected Pinyin Chinese characters or symbols Back Key Exits from the current input state Up Direction Key Down Direction Key Moves the cursor up and down Key Inputs punctuations Key Switches input modes 0 Key 9 Key Input digits 4 Functional Description 4 1 Phonebook The phonebook is used to store your phone numbers and it includes phone phonebook and SIM phonebook The phone phonebook can hold 200 entries while the SIM phonebook capac
10. may enter the call center via Main Menu gt Call Log 4 4 Phone Settings Via Call Settings you may set the normal functions of the phone Via Main Menu Settings you may have the following settings 1 Time amp date Set the time and date for the phone 2 Timed switch on off Switch on off the phone within the set time by the user 3 Language Chinese and English 4 Network settings Network selection etc 5 Security settings SIM lock phone lock keypad lock fixed dialing forbidden dialing and password revision 6 Restore factory settings Input the password to restore the factory settings 4 5 Kit Via Main Menu gt Kit display Alarm Clock At most this phone may set 5 alarm clocks at the same time Via the alarm clock settings on the tool bar of the main menu display the list of alarm clocks choose one alarm clock press the Enter Key to enter alarm clock settings 5 About GPS 5 1 Introduction to GPS related Functions GPS individual positioning High sensitivity new workmanship and the most advanced GPS chip Can work effectively in limited space such as the remote and narrow places in a city Low energy consumption Fast signal capturing Supports single positioning and continuous tracking Supports alarming and remote monitoring Supports fast dial button Supports the location information inquiry by SMS and Internet May monitor without disturbing the tracked person and r
11. mber after successful sending the mobile phone with such setup will receive one piece of config ok response information as shown in the following figure 770 12340000 CONFIG OK FH a a a A v vwvY Rik Be Hii EIA EBEFA Send command to the terminal The terminal will return confirmation message to the mobile phone 5 2 7 Low Voltage Alarming Function If the terminal of the ward has a very low power and needs to be powered off the terminal of the ward will automatically upload one piece of low voltage alarming command to the monitoring center number SMS format 356823031017473 038888 LPD 1 26280E4E 11354 6567 E 2232 7841 N 005 82 119 180310 061616 5 2 8 Set APN Command Create the SMS 802 APN letters or digits 4 20 bits Log user name letters or digits 4 20 bits in Log password letter or digits 4 20 bits in terminal password 4 bits and send it to the terminal after executing this command the terminal will automatically restart and connect to GPRS with APN set Command example 1 802 cmnet 0000 Command example 2 802 CCDLEN ABCD RX0000 0000 After this command is executed APN will be CCDLEN the login user name is ABCD and login password is RX0000 Note The default APN of this product is CMNET 11 5 2 9 Electronic Fence Function 1 GPS Fence Function Set fence format command number 751 fence radius sampling interval longitude latitude user password For example 751 500 5 2
12. the SOS key then the terminal will circularly dial the set phone until it is connected 5 2 4 SOS Function If the monitoring number i e the phone in Item 3 is set when the ward is in emergency press the SOS key for 3s then terminal will firstly play a piece of alert tone and then send a piece of alarm message to every pre saved number then circularly dial the three pre saved numbers until getting connected At the same time the terminal activates the GPS function after succeeding the terminal will report the current location to the center Format of sending alarm message 356823031017473 0 0000 S OS 2 26280E4EH 1354 6567 E 2232 7841 N 005 82 119 1803 10 061616 5 2 5 Regular Upload Interval Setup The defaulted factory upload interval of this device is 2 minutes for getting the point and 4 minutes for uploading one piece of positioning information The user may change such parameter according to actual demand Command format command number 730 Sampling interval Pieces of uploads User password For example 730 20 4 0000 Note The parameter 20 indicates getting one point every 20s after getting points accumulatively for 4 times upload one piece of positioning information with the upload interval as 20 4 80s The user may change this parameter as the case may be 5 2 6 Function of Changing Password Send the SMS 770 User new password User old password by mobile phone to the 10 terminal nu
13. tions 1 901 Command of reading user parameters 2 902 Command of reading GPRS parameters 3 904 GPRS connection command 4 905 GPRS disconnection command 5 2 11 Server setting command Format 803 IP adress port user password Example 803 www abcd com 003 0000 8 After sale Service For more information about after sale service please refer to the attached After sale Service Manual Notices This device is of non waterproof design This device must work with the cooperation of GSM GPRS network Make sure that the SIM card has sufficient balance in order to avoid inconvenience in use This device will not be able to work in case of power off and out of the service area even if you are a registered user This device supports the dual positioning mode of GPS and GSM GPRS Please use this device in a legal area any illegal consequence will be borne by the user 13
Download Pdf Manuals
Related Search