Home

Monitor User Manual

1. sa Wikevalnmele User Manual S24E650C S27E650C The colour and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Table of contents Before Using the Product Copyright 4 Securing the Installation Space 5 Precautions for storage 5 Safety Precautions 5 Symbols 5 Cleaning 6 Electricity and Safety 6 Installation 7 Operation 9 Correct posture to use the product 11 Preparations Checking the Components 12 Components 12 Parts 13 Front Buttons 13 Reverse Side 15 Installation 16 Attaching the Stand 16 Removing the Stand 17 Installing the Wall Mount 18 Wall Mount Kit Specifications VESA 19 Adjusting the Product Tilt and Height 20 Rotating the Monitor Screen 20 Anti theft Lock 21 Connecting and Using a Source Device Screen Setup Before Connecting 22 Pre connection Checkpoints 22 Connecting and Using a PC 22 Connection using the DVI cable 22 Connection Using the DVI HDMI Cable 23 Connection Using the HDMI Cable 23 Connection Using the HDMI DVI Cable 24 Connection Using the DP Cable 24 Connecting to Headphones 25 Connecting the Power 25 Tidying Up the Connected Cables 26 Connecting the Product to a PC as a USB HUB 27 Connecting a PC to the Product 27 Utilizing the Product as a USB HUB 28 Driver Installation 29 Setting Optimum Resolution 29 Attaching the so
2. Settings gt Advanced Monitor and adjust Refresh rate under Monitor settings Windows ME 2000 Go to Control Panel Display Settings Advanced Monitor and adjust Refresh rate under Monitor settings Windows Vista Go to Control Panel Appearance and Personalization Personalization Display Settings Advanced Settings Monitor and adjust Refresh rate under Monitor settings Windows 7 Go to Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor and adjust Refresh rate under Monitor settings Windows 8 Windows 8 1 Go to Settings Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor and adjust Refresh rate under Monitor settings How can I change the resolution Windows XP Go to Control Panel Appearance and Themes Display Settings and adjust the resolution Windows ME 2000 Go to Control Panel Display Settings and adjust the resolution Windows Vista Go to Control Panel Appearance and Personalization Personalize gt Display Settings and adjust the resolution Windows 7 Go to Control Panel Appearance and Personalization Display Adjust Resolution and adjust the resolution Windows 8 Windows 8 1 Go to Settings Control Panel Appearance and Personalization Display Adjust Resolution and adjust th
3. Do not use or keep combustible spray or an inflammable substance near the product An explosion or fire may result Ensure the vents are not blocked by tablecloths or curtains e An increased internal temperature may cause a fire Do not insert metallic objects chopsticks coins hairpins etc or objects that burn easily paper matches etc into the product via the vent or input output ports etc Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product Then contact Samsung Customer Service Centre Product failure an electric shock or fire may result Do not place objects containing liquid vases pots bottles etc or metallic objects on top of the product e Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product Then contact Samsung Customer Service Centre e Product failure an electric shock or fire may result Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn in or defective pixels e Activate power saving mode or a moving picture screen saver if you will not be using the product for an extended period of time Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time vacation etc Dust accumulation co
4. the optimum picture quality due to the nature of the panel Using a resolution Vertical Frequency 56 72 Hz other than the specified resolution may degrade the pict ality To avoid A z egra S pe FAYO aol Resolution Optimum resolution 1920 x 1080 60 Hz this it is recommended that you select the optimum resolution specified for A your product Maximum resolution 1920 x 1080 60 Hz If a signal that belongs to the following standard signal modes is transmitted from your PC the screen will automatically be adjusted If the signal transmitted from the PC does not belong to the standard signal modes the screen may be blank even though the power LED turns on In such a case change the settings according to the following table by referring to the graphics card user manual Resolution Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity kHz Hz MHz H V BM 720 x 400 31 469 70 087 28 322 AC 640 x 480 35 000 66 667 30 240 AC 832 x 624 49 726 74 551 57 284 AC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 31 469 59 940 25 175 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 Resolution Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity kHz Hz M
5. 5 30 0 2 30 2 0 N k 130 mm 2 0 mm fs OO oe Ta ENA j Adjust the screen following the arrow direction Rotate the screen in clockwise direction till it becomes completely vertical to the desktop Rotating the screen counterclockwise can damage the product Rotating the screen when the Lay product is upright or when the height is not at the maximum can also damage the product __ J__ J 2 The monitor tilt and height can be adjusted When adjusting the tilt and height hold both sides of the product and avoid using excessive force to prevent damage The rotation and height adjustment has a certain tolerance Stay within the tolerances when rotating or adjusting the height of the product 20 Anti theft Lock An anti theft lock allows you to use the product securely even in public places The locking device shape and locking method depend on the manufacturer Refer to the user guide provided with your anti theft locking device for details a W N 27E650C S24E650C lt aS it o l 2 Fix the cable of your ant
6. Description Open or close the onscreen display OSD menu or return to the parent menu MENU If you tap the MENU button when the function button screen is displayed the OSD On Screen Display menu will be displayed Move to the upper or lower menu or adjust the value for an option on the OSD menu V A O When the Function Key Guide is displayed press A to adjust the Brightness and Contrast Volume Confirm a menu selection Pressing the C button when the OSD menu is not displayed will change the input source DVI HDMI DisplayPort Ove If you power on the product or change the input source by pressing the C button a message that shows the changed input source will appear at the top left corner of the screen Press gt to enable or disable Eye Saver Mode The items below are not available if the Eye Saver Mode function is enable SAMSUNG e Picture macicBright Brightness Color Game Mode System Smart ECO Saving Turn the screen on or off The power indicator will be lit when the product is operating normally For details on the power saving function refer to PowerSaver P 70 in the product specifications To reduce power consumption it is best to remove the power cable when not using the product for an extended period of time Icons Description When a control button on the product is pressed the Function Key Guide will be displayed before the onscreen menu ope
7. W to move to Off Timer and press CC on the product O C on the product mim A WwW N Press A W to move to Off Timer and press K Ve 4 gt Off Deactivate the off timer so that the product does not power off automatically e On Activate the off timer so that the product powers off automatically Enable or disable Off Timer the Off Timer 6 Press A W to move to the option you want and press C buttons 7 The selected option will be applied K Ye 4 The displayed image may differ depending on the model This option is only available when Off Timer is set to On Set the monitor to Off Timer automatically turn eee Turn Off After time period Turn Off After 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the corresponding menu screen Press A W to move to System and press 1 on the product Press A V to move to Off Timer Plus and press C on the product lt ee 4 ee The displayed image may differ depending on the model Press A W to move to Turn Off After and press C on the product 2 3 4 Press A W to move to Off Timer and press C on the product 5 6 Press A W to configure Turn Off After 7 The selected option will be applied The off timer can be set within a range of 1 to 23 hours The product will autom
8. and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Before assembling the product place the product down on a flat and stable surface so that the screen is facing downwards Warning The product is curved Placing pressure on the product when on a flat surface may damage the product When the product is on the ground facing up or down do not put pressure on it A Place the protective Styrofoam cushion included in the package on the floor and place the product facing down on the Styrofoam as shown in the image If Styrofoam is unavailable use a thick sitting mat A A Insert the tabs of the stand into the slots on the back of the product in the direction of the arrows J Fasten the screws to tightly fix the stand After attaching the stand place the product in an upright position Removing the Stand The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Before assembling the product place the product down on a flat and stable surface so that the screen is facing downwards Warning The product is curved Placing pressure on the product when on a flat surface may damage the product When the product is on the ground facing up or down do not put pressure on it Power the product off and
9. came with the sound bar for details To remove the sound bar follow the steps below in reverse Do not use excessive force when adjusting the tilt of the product Tilt the product with all the cables connected as Insert the connector bars of the sound bar into the After attaching the sound bar adjust the tilt of the shown in the picture slots on the sides then push down in the direction product of the arrow to secure the sound bar in place 30 Specifications of the sound bar sold separately General Model Name CY SPU10B Product type Sound Bar computer multimedia Product size W x D x H 400 x 46 5 x 50 mm Weight 535g Speaker type Active with internal amplifier RMS output Total 2 5 W lt 10 THD for USB 3 0 L R Speaker system Sound pressure 0 5 m 1 W 83dB 3dB Rated pressure for the speaker unit 2WRMS Impedance 80hm Function and connection Control device Volume L R swapping switch Input output type USB port power and audio inputs Headphone output mini phone stereo 3 5 mm e Audio line input mini phone stereo 3 5 mm Chapter 04 Screen Setup Configure the screen settings such as brightness A detailed description of each function is provided Refer to your product for details Configuring SAMSUNG MAGIC Bright 1 Press any button on the front of the product to display the Function Key Guide Nex
10. for game mode corresponding menu screen Use this feature when playing games on a PC or when a game console such as PlayStation or Xbox is connected Press A W to move to Picture and press on the product This menu is not available when Eye Saver Mode is enabled This menu is not available when Smart ECO Saving is enabled Press A W to move to Game Mode and press C on the product Optimizes image Press A W to move to the option you want and press 1 C buttons settings for playing games Eye Saver Mode mim A WwW N Soe a The selected option will be applied Besporeedie On When the monitor turns off enters power saving mode or changes input sources Game Mode turns Off even if it is set to Picture Size Always On On Screen Adjustment If you want to keep Game Mode enabled all the time select Always On lt ee Ye 4 The displayed image may differ depending on the model Response Time Accelerate the panel response rate to make video appear more vivid and natural It is best to set Response Time to Standard or Faster when you are not viewing a movie Accelerate the panel response rate to make video Game Mode appear more vivid and natural Eye Saver Mode Response Time Standard Picture Size Faster Screen Adjustment Fastest E E 4 The displayed image may differ depending on the model Configuring the Response Time 1 P
11. install the product in a kitchen or near a kitchen counter Do not drop the product while moving e Product failure or personal injury may result Do not set down the product on its front The screen may become damaged When installing the product on a cabinet or shelf make sure that the bottom edge of the front of the product is not protruding e The product may fall and become damaged and or cause an injury e Install the product only on cabinets or shelves of the right size Set down the product gently e Product failure or personal injury may result Installing the product in an unusual place a place exposed to a lot of fine dust chemical substances extreme temperatures or a significant presence of moisture or a place where the product will operate continuously for an extended period of time may seriously affect its performance e Be sure to consult Samsung Customer Service Centre if you want to install the product at such a place oN LAY There is a high voltage inside the product Never disassemble repair or modify the product yourself e A fire or electric shock may result Contact Samsung Customer Service Centre for repairs To move the product first disconnect all the cables from it including the power cable Damage to the cord may result in a fire or electric shock If the product generates abnormal sounds a burning smell o
12. leading to personal injury attaching the wall mount to surfaces other than plaster board please contact i i l Samsung is not liable for these kinds of accidents your nearest dealer for additional information If you install the product on a slanted wall it may fall and result in severe personal injury Samsung wall Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the mount kits contain a detailed installation manual and all parts necessary for consumer fails to follow the product installation instructions assembly are provided Do not mount the product at more than a 15 degree tilt Always have two people mount the product on a wall ea Standard dimensions for wall mount kits are shown in the table below Unit mm inches Model name VESA screw hole Standard Screw Quantity specs A B in millimeters 24E650C S27E650C 100 x 100 3 9 x 3 9 M3 x L10 or smaller 4 MACHINE SCREW Do not install your Wall Mount Kit while your product is turned on It may result in personal injury due to electric shock IO Adjusting the Product Tilt and Height Rotating the Monitor Screen The colour and shape of parts may differ from what is shown Specifications are subject to change You can rotate your monitor as shown below without notice to improve quality 7 1 5 1 5 1 59 91 5 1 5 1
13. product Move the image displayed on the screen to the left or right H Position Press A W to move to Screen Adjustment and press O C on the product V Position Press A W to move to H Position or V Position and press O C amp on the product Press A W to configure H Position or V Position O A W N The selected option will be applied E E 4 Move the image displayed on the 3 screen up or down 2 H Position a V Position E N 4 The displayed image may differ depending on the model Chapter 05 Coordinating OSD A detailed description of each function is provided Refer to your product for details Changing Transparency 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the corresponding menu screen SUIS Paley Configure the 2 Press A W to move to OnScreen Display and press 2 C on the product transparency of the menu windows Position C 3 Press A W to move to Transparency and press C on the product Transparency Language e Off On Display Time 4 Press A W to move to the option you want and press E buttons 5D The selected option will be applied lt ee Ye 4 The displayed image may differ depending on the model 46 Position Configuring H Position amp V Position H Position Move the menu position to the left or right V Position Mov
14. remove the power cable from the power socket S Na Ei Place the protective Styrofoam cushion included Unfasten the screw from the back of the in the package on the floor and place the product product facing down on the Styrofoam as shown in the image If Styrofoam is unavailable use a thick sitting mat Xe Do not place your hands in the swiveling area Do not put the hand below the stand body Lift and detach the stand J Do not hold the product upside down only by the stand 17 Installing the Wall Mount The wall mount kit allows you to mount the product on the wall Purchase a compatible wall mount kit to use with the product For detailed information on installing the wall mount see the instructions provided with the wall mount We recommend you contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own Wall Mou nt Kit Specifications VESA For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications Install your wall mount on a solid wall perpendicular to the floor Before Do not fasten the screws too firmly This may damage the product or cause the product to fall
15. repair centre and there is no defect in the product i e where you have failed to read this user manual e The amount of such administration charge will be advised to you before any work or home visit is carried out Securing the Installation Space Safety Precautions Ensure some space around the product for ventilation An internal temperature rise may cause fire and damage the product Be sure to allow the amount of space as shown below or greater when installing Caution the product RISK OF ELECTRIC SHOCK DO NOT OPEN Caution TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL A This symbol indicates that high voltage is present inside The exterior may differ depending on the product t 10 cm 3 93 Inches t 10 cm 3 93 Inches 10 cm 110cm 3 93 Inches 3 93 Inches It is dangerous to make any kind of contact with any internal part of this product A i This symbol alerts you that important literature concerning operation and maintenance has been 110cm included with this product E 3 93 Inches Symbols Precautions for storage High glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used b A serious or fatal injury may result if instructions are not followed nearby Contact your nearest Samsung Customer Service Centre if you want to clean
16. the inside of the product Service fee will be charged Personal injury or damage to properties may result if instructions are not followed Activities marked by this symbol are prohibited Instructions marked by this symbol must be followed UI Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched Take the following steps when cleaning The following images are for reference only Real life situations may differ from what is shown in the images 1 Power off the product and computer 2 Disconnect the power cord from the product Hold the power cable by the plug and do not touch the cable with wet hands Otherwise an electric shock may result 3 Wipe the monitor with a clean soft and dry cloth Donot apply a cleaning agent that contains alcohol wer solvent or surfactant to the monitor re 7 Do not spray water or detergent directly on the product 4 Weta soft and dry cloth in water and wring thoroughly to clean the exterior of the product 5 Connect the power cord to the product when cleaning is finished 6 Poweron the product and computer Electricity and Safety The following images are for reference only Real life situations may differ from what is shown in the images Do not use a damaged power cord or plug or a loose power socket e An electric shock o
17. DMI DVI Cable Connection Using the DP Cable Do not connect the power cable before connecting all other cables Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable Ensure you connect a source device first before connecting the power cable o HDMI IN DP IN f ea J J 1 Connect the HDMI DVI cable to the HDMI IN port on the back of the product and the DVI port on 1 Connect the DP cable to the DP IN port on the back of the product and the DP port on the PC the PC 2 Press J CS to change the input source to DisplayPort Press O C8 to ch thei to HDMI 2 eee Penan JEEP SUEED If audio is supported the Volume can be adjusted using the A buttons on the front of the product The audio function is not supported if the source device is connected using the HDMI DVI cable o _ Connections with an HDMI or DVI cable are not supported Provided ports may vary depending on the product o Provided ports may vary depending on the product 24 Connecting to Headphones Connecting the Power Do not connect the power cable before connecting all other cables Connecting parts may differ in different products Ensure you connect a source device first before connecting the power cable The exterior may differ depending on the product To use the product con
18. Hz H V Horizontal Frequency VESA 800 x 600 48 077 72 188 50 000 The time required to scan a single line from the left to the right side of the VESA 800 x 600 46 875 75 000 49 500 screen is called a horizontal cycle The reciprocal number of a horizontal cycle VESA 1024 x 768 48 363 60 004 65 000 aps is called horizontal frequency Horizontal aa VESA 1024 x 768 56 476 70 069 75 000 Vertical Frequency Repeating the same picture dozens of VESA 1024 x 768 60 023 75 029 78 750 times per second allows you to view natural pictures The repeat frequency is VESA 1152 x 864 67 500 75 000 108 000 called vertical frequency or refresh rate and is indicated in Hz VESA 1280 x 720 45 000 60 000 74 250 VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 1024 63 981 60 020 08 000 VESA 1280 x 1024 79 976 75 025 35 000 VESA 1440 x 900 55 935 59 887 06 500 VESA 1600 x 900 RB 60 000 60 000 08 000 VESA 1680 x 1050 65 290 59 954 46 250 VESA 1920 x 1080 67 500 60 000 48 500 Chapter 11 Appendix Responsibility for the Pay Service Cost to Customers When the service is requested in spite of in warranty we may charge you for a visit from a service technician in the following cases Not a product defect Cleani ng of the product Adjustment Explanation Re installation and etc a service technician gives instructions on how to use product or simply adjusts options wit
19. You can activate either Dynamic Standard Movie or Custom You can select Custom which automatically recalls your personalized picture settings Set to an optimum SAMSUNG p F picture quality MAG ICBright Dynamic EE In AV mode Brightness Standard the working Dynamic Select this mode to view a sharper image than in Standard mode environment Contrast Movie Standard Select this mode when the surroundings are bright This also provides a sharp image Sharpness Custom Movie Select this mode when the surroundings are dark This will save power and reduce eye fatigue Color Custom Select this mode when you want to adjust the image according to your preferences SAMSUNG MAGICUpscale 4 Press A W to move to the option you want and press C buttons lt a O D The selected option will be applied The displayed image may differ depending on the model Brightness Configuring Brightness 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the You can adjust the general brightness of the picture Range 0 100 corresponding menu screen A higher value will make the picture appear brighter This menu is not available when MacicBright is set to Dynamic Contrast Press A W to move to Picture and press on the product mode This menu is not available when Smart ECO Saving is enabled Press A W to move to Brightness and
20. atically power off after the specified number of hours For products for the market in some regions the Off Timer is set to automatically activate 4 hours after the product powers on This is done in accordance with power supply regulations If you do not want the timer to activate go to MENU gt System Off Timer Plus and set Off Timer to Off Enable or disable Configuring Eco Timer the Eco Timer Off Timer gt 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the corresponding menu screen Press A W to move to System and press on the product lt n a a Press A W to move to Off Timer Plus and press C amp on the product Press A W to move to Eco Timer and press C on the product Enable or disable Eco Timer the Eco Timer mi A W N Press A W to move to Eco Timer and press Q on the product Off Deactivate the eco timer to disable the automatic power off feature The product will not power off while in power saving mode if this feature is deactivated On Activate the eco timer so that the product powers off automatically when it has been in power saving mode for a specified period of time 6 Press A W to move to the option you want and press 1 C buttons p o2 n 6 7 The selected option will be applied The displayed image may differ depending on the model This option is on
21. creen 60 Installing the Software Easy Setting Box 61 Installing the Software 61 Removing the Software 61 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre 62 Testing the Product 62 Checking the Resolution and Frequency 62 Check the following 63 Q amp A 66 General 68 PowerSaver 70 Standard Signal Mode Table 71 Appendix Responsibility for the Pay Service Cost to Customers 73 Not a product defect 73 A Product damage caused by customer s fault 73 Others 73 Correct Disposal 74 Correct Disposal of This Product Waste Electrical amp Electronic Equipment 74 Extended warranty 74 Terminology 75 Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited Microsoft Windows are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of the Video Electronics Standards Association Ownership of all other trademarks is attributed to their due owner e An administration fee may be charged if either a an engineer is called out at your request and there is no defect in the product i e where you have failed to read this user manual b you bring the unit to a
22. e HDMI Black Level Settings 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the If a DVD player or set top box is connected to the product via HDMI image quality degradation contrast colour degradation black level etc may occur depending on the connected source device In such case HDMI Black Level can be used to adjust the image quality 2 Press A W to move to Picture and press on the product corresponding menu screen If this is the case correct the degraded picture quality using HDMI Black Level 3 Press A W to move to HDMI Black Level and press 1 S on the product This function is only available in HDMI mode Normal Select this mode when there is no contrast ratio degradation Optimize HDMI ane ie Bright Gin picture brightness e Low Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation and contrast by 4 Brightness 100 adjusting the black level of the video signal 5 The selected option will be applied Press A W to move to the option you want and press C buttons Contrast 75 Sharpness 50 Color HDMI Black Level may not be compatible with some source devices RARBG Upscale HDMI Black Level Kow The HDMI Black Level feature is only activated at a certain AV resolution such as 720P and 1080P K n The displayed image may dif
23. e model Sharpness Configuring Sharpness 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the Make the outline of objects more clear or blurry Range 0 100 corresponding menu screen A higher value will make the outline of objects clearer This option is not available when mMacicBri is in Ci or i t t t lable when MacicBright Cinema or Dynamic Contrast mode Press A W to move to Picture and press on the product This menu is not available when MacicUpscale is in Mode1 or Mode2 mode Press A Y to move to Sharpness and press CC on the product This menu is not available when Game Mode is enabled Adjust the Sharpness using the A W buttons Adjust the MAUNE Bright Gon sharpness of the mim A W N The selected option will be applied picture Values Brightness 100 closer to 100 mean a sharper image Contrast 75 Sharpness 60 Color gt MAG Upscale Oi lt ee Ye 4 ee gt The displayed image may differ depending on the model Color A detailed description of each function is provided Refer to your product for details Adjust the tint of the screen This menu is not available when MacicBright is set to Cinema or Dynamic Contrast mode This menu is not available when Game Mode is enabled This menu is not available when Eye Saver Mode is enabled Configure color 4 t
24. e resolution Question How do I set power saving mode Answer Windows XP Set power saving mode in Control Panel Appearance and Themes Display Screen Saver Settings or BIOS SETUP on the PC Windows ME 2000 Set power saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on the PC Windows Vista Set power saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 7 Set power saving mode in Control Panel Appearance and Personalization gt Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 8 Windows 8 1 Set power saving mode in Settings Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Chapter 10 Specifications Size General Model Name Panel Size 24 CLASS 23 5 Inches 59 8 cm 27 CLASS 27 0 Inches 68 5 cm Display area 521 39 mm H x 293 28 mm V 597 88 mm H x 336 31 mm V Display area 20 53 Inches H x 11 55 Inches V 23 54 Inches H x 13 24 Inches V c Hl Pixel Pitch 0 27156 mm H x 0 27156 mm V 0 3114 mm H x 0 3114 mm V 0 0107 Inches H x 0 0107 Inches V 0 0123 Inches H x 0 0123 Inches V V Dimensions W x H x D Without Stand 547 8 x 333 4 x 61 4 mm 3 8 kg 623 2 x 375 7 x 62 9 mm 4 9 kg l W
25. e the menu position up or down Move the menu f position to the left 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the H Position 1007 orright corresponding menu screen V Position 0 Press A W to move to OnScreen Display and press on the product Press A W to move to Position and press CC on the product Press A W to move to H Position or V Position and press O C amp on the product lt a vv ee Press A W to configure H Position or V Position nou A W N Meeme The selected option will be applied position up or H Position down V Position _ lt a E The displayed image may differ depending on the model Language Configuring Language 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the Set the menu language corresponding menu screen A change to the language setting will only be applied to the onscreen menu display Press A W to move to OnScreen Display and press 1 C on the product It will not be applied to other functions on your PC Press A W to move to Language and press on the product Set the menu language Transparency Press A W to move to the language you want and press C buttons Position Deusen mim A WwW N LERE ER The selected option will be applied Display Time Espa ol F
26. ects screen flicker Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen It represents the level of display detail A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time E g A resolution of 1920 x 1080 consists of 1920 horizontal pixels horizontal resolution and 1080 vertical lines vertical resolution Plug amp Play___ sThe Plug amp Play feature allows the automatic exchange of information between a monitor and PC to produce an optimum display environment The monitor uses VESA DDC international standard to execute Plug amp Play
27. eight 21 57 x 13 13 x 2 42 Inches 8 38 Ibs 24 54 x 14 79 x 2 48 Inches 10 80 Ibs With Stand IN 547 8 x 392 4 x 257 4 mm 6 2 kg MIN 623 2 x 414 9 x 257 4 mm 7 3 kg Dimensions W x H x D 21 57 x 15 45 x 10 13 Inches 13 67 Ibs 24 54 x 16 33 x 10 13 Inches 16 09 Ibs p AX 547 8 x 522 4 x 257 4 Mmm MAX 623 2 x 544 9 x 257 4 mm i 21 57 x 20 57 x 10 13 Inches 24 54 x 21 45 x 10 13 Inches Maximum Pixel Clock 148 5 MHz H Power Supply AC 100 240 V 10 50 60 Hz 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries Model Name 24E650C 27E650C Signal connectors HDMI DisplayPort DVI Environmental conditions Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play This monitor can be installed and used with any Plug and Play compatible systems Two way data exchange between the monitor and PC system optimizes the monitor settings Monitor installation takes place automatically However you can customize the installation settings if desired Panel Dots Pixels Due to the nature of the manufacturing of this product approximately 1 pixel per million 1 ppm may be brighter or darker on the LCD panel This does not affect product performance The above specifications are subject to change withou
28. er on the product 4 ifthe message Check Signal Cable appears the product is working normally If the screen remains blank check the PC system video controller and cable Checking the Resolution and Frequency For amode that exceeds the supported resolution refer to Standard Signal Mode Table the message Not Optimum Mode will appear for a short time The displayed resolution may vary depending on the product or PC system settings 62 Check the following Installation issue PC mode Issues Solutions The screen keeps switching on and off Check the cable connection between the product and PC and ensure the connectors are locked Blank spaces are found on all four sides of the screen when The blank spaces found on the screen have nothing to do with the product an HDMI or HDMI DVI cable is connected to the product and Blank spaces on the screen are caused by the PC or graphics card To resolve the problem adjust the PC screen size in the HDMI or DVI settings for the graphics card If the graphics card settings menu does not have an option to adjust the screen size update the graphics card driver to the latest version Please contact the graphics card or computer manufacturer for further details about how to adjust the screen settings Issues Solutions The power LED is off The screen will not switch on Check that the power cable is connected properly The message Check Signal Cable appears Check that t
29. eshing is invisible to the naked eye The number of screen refreshes is called scanning rate and is measured in Hz A scanning rate of 60Hz means that the screen refreshes 60 times per second The screen scanning rate depends on the performance of the graphics cards in your PC and monitor Dot Pitch___ The product and screen consist of red green and blue dots A shorter distance between the dots produces a higher resolution Dot pitch refers to the distance between the shortest distance between dots of the same colour Dot pitch is measured in millimeters Horizontal Frequency Characters or images displayed on the monitor screen consist of numerous dots pixels Pixels are transmitted in horizontal ines which are then arranged vertically to create an image The horizontal frequency is measured in kHz and represents how many times horizontal ines per second are transmitted and displayed on the monitor screen A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85000 times per second The horizontal frequency is indicated in 85kHz Vertical Frequency___ One image is made of numerous horizontal lines The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines A vertical frequency of 60 means that an image is transmitted 60 times per second The vertical frequency is also called refresh rate and aff
30. fer depending on the model Eye Saver Mode Configuring Eye Saver Mode 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the Set to an optimum picture quality suitable for eye relaxation corresponding menu screen T V Rheinland Low Blue Light Content is a certification for products which meet requirements for lower blue light levels When Eye Saver Mode is set to On the blue light level at a wavelength of about 400nm decreases This provides optimum picture quality and reduces eyestrain At the same time the blue light level is lower than in the default settings and it was tested by TUV Rheinland and certified as it met the requirements of TUV Rheinland Low Blue Light Content standards Press A W to move to Picture and press on the product Press A W to move to Eye Saver Mode and press on the product Press A W to move to the option you want and press C buttons mim BB WwW N Set to an optimum The selected option will be applied picture quality suitable for eye Game Mode relaxation Eye Saver Mode Response Time Picture Size Screen Adjustment KI kA ns The displayed image may differ depending on the model Game Mode Configuring Game Mode 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the Configure the product screen settings
31. g the picture corresponding menu screen Off Timer Plus oe PC AV Mode z 2 Press amp W to move to System and press C on the product Source Detection Auto 3 Press A W to move to PC AV Mode and press C on the product Key Repeat Time Acceleration Rasal 4 Press amp W to move to DVI HDMI or DisplayPort and press C on the product Set to PC when connected to a PC La Ly La gt Set to AV when connected to an AV device D Press A W to move to the option you want and press J C buttons Select the PC AV DVI mode for the DVI a source The selected option will be applied HDMI DisplayPort K a3 n The displayed image may differ depending on the model Source Detection Configuring Source Detection 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the You can activate Source Detection corresponding menu screen Decide how input 2 Press A W to move to System and press C on the product sources will be detected Off Timer Plus 3 Press A W to move to Source Detection and press C on the product PC AV Mode Smart ECO Saving 5 e Auto The input source is automatically recognized Source Detection Auto e Manual Manually select an input source Key Repeat Time Manual Reset All 4 Press A F to move to the option you want and press C buttons 5 The selected optio
32. ge the input source to Audio is not available if the PC and product are connected via the DVI port Provided ports may vary depending on the product Connection Using the DVI HDMI Cable Connection Using the HDMI Cable Do not connect the power cable before connecting all other cables Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable Ensure you connect a source device first before connecting the power cable o l o f HDMI IN 1 Connect the HDMI DVI cable to the DVI IN port on the back of the product and the HDMI port on 1 Connect the HDMI cable to the HDMI IN port on the back of the product and the HDMI port on the PC the PC 2 Press CS to change the input source to DVI 2 Press CS to change the input source to HDMI The audio function is not supported if the source device is connected using the HDMI DVI cable If audio is supported the Volume can be adjusted using the A buttons on the front of the product Provided ports may vary depending on the product The DVI HDMI cable can be connected to an HDMI port only Use of the maximum resolution may not be possible and the picture quality may degrade depending on the cable type Provided ports may vary depending on the product cS Connection Using the H
33. he cable is properly connected to the product Check that the device connected to the product is powered on Not Optimum Mode is displayed This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product Change the maximum resolution and frequency to suit the product performance referring to Standard Signal Mode Table P71 The images on the screen look distorted Check the cable connection to the product Issues The screen is not clear The screen is blurry Solutions Remove any accessories video extension cable etc and try again Set the resolution and frequency to the recommended level The screen appears unstable and shaky There are shadows or ghost images left on the screen Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product Next if required change the settings referring to Standard Signal Mode Table P 71 in this manual and the Information menu on the product The screen is too bright The screen is too dark Adjust Brightness and Contrast Screen colour is inconsistent Change the Color settings The colours on the screen have a shadow and are distorted Change the Color settings White does not really look white Change the Color settings There is no image on the screen and the power LED blinks every 0 5 to 1 second The p
34. hout disassembling product a defect is caused by external environmental factors Internet Antenna Wired Signal etc a product is reinstalled or devices are connected additionally after installing the purchased product for the first time a product is reinstalled to move to a different spot or to move to a different house customer requests instructions on how to use because of another company s product customer requests instructions on how to use the network or another company s programme f customer requests software installation and setup for the product a service technician removes cleans dusts or foreign materials inside of the product customer requests an installation additionally after purchasing a product through home shopping or online A Product damage caused by customer s fault Product damage caused by customer s mishandling or wrong repair If a product damage is caused by External impact or drop Use of supplies or separatly sold product unspecified by Samsung e Repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co Ltd Remodeling or repairing the product by customer Using it with incorrect voltage or non authorised electrical connections 7 ot following the cautions in User Manual Others e If product fails by natural disaster lightning fire earthquake flood damage etc If consu
35. i theft locking device to a heavy object such as a desk Put one end of the cable through the loop on the other end nsert the locking device into the anti theft lock slot at the back of the product Lock the locking device An anti theft locking device can be purchased separately Refer to the user guide provided with your anti theft locking device for details Anti theft locking devices can be purchased at electronics retailers or online Chapter 03 Connecting and Using a Source Device Before Connecting Connecting and Using a PC Check the following before you connect this product with other devices Select a connection method suitable for your PC Connecting parts may differ in different products Pre connection Checkpoints Connection using the DVI cable Before connecting a source device read the user manual provided with it The number and locations of ports on source devices may differ from device to Do not connect the power cable before connecting all other cables device Ensure you connect a source device first before connecting the power cable Do not connect the power cable until all connections are completed Connecting the power cable during connection may damage the product Check the types of ports at the back of the product you want to connect 1 Connect the DVI cable to the DVI IN port on the back of the product and the DVI port on the PC 2 Press J CS to chan
36. ing the power cord from the power socket e An electric shock or fire may result DO NOT PLACE CANDLES INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES A fire may result Do not install the product in poorly ventilated spaces such as a bookcase or closet e An increased internal temperature may cause a fire Install the product at least 10cm away from the wall to allow ventilation An increased internal temperature may cause a fire Keep the plastic packaging out of the reach of children Children may suffocate Do not install the product on an unstable or vibrating surface insecure shelf sloped surface etc e The product may fall and become damaged and or cause an injury Using the product in an area with excess vibration may damage the product or cause a fire Do not install the product in a vehicle or a place exposed to dust moisture water drips etc oil or smoke e A fire or electric shock may result Do not expose the product to direct sunlight heat or a hot object such as a stove The product lifespan may be reduced or a fire may result Do not install the product within the reach of young children The product may fall and injure children Edible oil such as soybean oil can damage or deform the product Do not
37. ion The software may not work properly if you do not restart the computer after the installation The Easy Setting Box icon may not appear depending on the computer system and the product specifications f the shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation Easy Setting Box The Easy Setting Box installation may be affected by the Graphics Card Motherboard and the Networking Environment System Requirements Os Windows Vista 32Bit 64Bit Windows 7 32Bit 64Bit Windows 8 32Bit 64Bit Windows 8 1 32Bit 64Bit Hardware e At least 32MB of memory e At least 60MB of free space on the hard disk drive Removing the Software Click Start select Settings Control Panel and then double click Add or Remove Programs Select Easy Setting Box from the programme list and click the Add Delete button Chapter 09 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre Before calling Samsung Customer Service Centre test your product as follows If the problem persists contact Samsung Customer Service Centre Testing the Product Check if your product is operating normally by using the product test function If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC perform a self diagnosis test 1 Power off both the PC and product 2 Disconnect the cables from the product 3 Pow
38. k slightly downward at the screen Keep your eyes directly in front of the screen Adjust the angle so light does not reflect on the screen Keep your forearms perpendicular to your upper arms and level with the back of your hands Keep your elbows at about a right angle Adjust the height of the product so you can keep your knees bent at 90 degrees or more your heels attached to the floor and your arms lower than your heart Chapter 02 Preparations Checking the Components Contact the vendor where you Components purchased the product if any components are missing b J i Components may vary depending on the country The pictures may look different from the actual components The optimal resolution may not be lt A available when using a non high speed HDMI or HDMI DVI cable lt T gt TO y Warranty card Quick Setup Guide Not available in some Regulatory guide User manual Power cable P25 locations HDMI DVI cable Optional P23 ZR oS MINI DP cable Optional Cleaning cloth Optional Sound Bar Optional Parts Front Buttons The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality amp When the initial screen is displayed tap any button on the front except for the W and 0 buttons to display the function button screen Icons
39. ly available when Eco Timer is set to On Set the monitor to Eco Timer automatically turn cee Eco Off After Eco Off After time period 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the corresponding menu screen Press A W to move to System and press on the product Press A W to move to Off Timer Plus and press C on the product lt ee 4 ee The displayed image may differ depending on the model Press A V to move to Eco Off After and press O C8 on the product 2 3 4 Press A W to move to Eco Timer and press on the product 5 6 Press A W to configure Eco Off After 7 The selected option will be applied The Eco Timer can be set between 10 and 180 minutes The product will automatically power off after the specified time has elapsed PC AV Mode Supplied for the wide models only such as 16 9 or 16 10 Ifthe monitor when set to DVI HDMI or DisplayPort is in power saving mode or is displaying the message Check Signal Cable press the MENU button to display the On Screen Display OSD You can select PC or AV Set PC AV Mode to AV The picture size will be enlarged This option is useful when you view a movie Configuring PC AV Mode 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the Set to AV to enlarge Smart ECO Savin
40. mable components are all used up Battery Toner Fluorescent lights Head Vibrator Lamp Filter Ribbon etc If customer requests a service in case the product has no defect service fee may be charged So please read User Manual first Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Extended warranty You can buy an extended warranty within 90 days of purchasing the product The extended warranty will cover an additional period of 3 years beyond the
41. mbined with heat can cause a fire electric shock or electric leakage Use the product at the recommended resolution and frequency e Your eyesight may deteriorate Do not hold the product upside down or move it by holding the stand The product may fall and become damaged or cause an injury Looking at the screen too close for an extended period of time can deteriorate your eyesight Do not use humidifiers or stoves around the product A fire or electric shock may result Rest your eyes for more than 5 minutes for every 1 hour of product use e Eye fatigue will be relieved Do not touch the screen when the product has been turned on for an extended period of time as it will become hot Store small accessories out of the reach of children Exercise caution when adjusting the product angle or stand height Your hand or finger may get stuck and injured e Tilting the product at an excessive angle may cause the product to fall and an injury may result Do not place heavy objects on the product Product failure or personal injury may result When using headphones or earphones do not turn the volume too high Having the sound too loud may damage your hearing Correct posture to use the product CAS Use the product in the correct posture as follows Straighten your back Allow a distance of 45 to 50 cm between your eye and the screen and loo
42. n will be applied lt ee VY ee 4 The displayed image may differ depending on the model Key Repeat Time Control the response rate of a button when the button is pressed Configure the response rate of a button when the Off Timer Plus button is pressed Smart ECO Saving PC AV Mode Source Detection Acceleration Key Repeat Time 1 sec Reset All 2 sec No Repeat lt Ye 4 The displayed image may differ depending on the model Configuring Key Repeat Time 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the corresponding menu screen Press A F to move to System and press 1 on the product Press A W to move to Key Repeat Time and press 1 on the product Acceleration 1 sec or 2 sec can be selected If No Repeat is selected a command responds only once when a button is pressed Press A W to move to the option you want and press buttons The selected option will be applied Reset All Initializing Settings Reset All 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the Return all the settings for the product to the default factory settings corresponding menu screen Return all the settings for the product to the default factory Off Timer Plus settings Press A W to move to System and press C on the pr
43. nect the power cable to a power outlet and the POWER IN port on the product 1 Connect an audio output device such as headphones to K port on the product The input voltage is switched automatically The sound could only be heard when using the HDMI to HDMI cable or DP cable If the stereo cable is connected the Volume can be adjusted using the A buttons on the front of the product Provided ports may vary depending on the product ae Tidying Up the Connected Cables Connecting the Product to a PC as a USB HUB Connecting a PC to the Product The product can function as a HUB by connecting to a PC via a USB cable You can connect a source device directly to the product and control the device from the product without having to connect the device to the PC To use the product as a USB hub connect the product to a PC using a USB cable ss PC IN Connect the USB cable to J on the back of the product and USB on the PC A USB 2 0 cable can be used to connect the product to a PC However to take full advantage of the USB 3 0 function connect a USB 3 0 cable between the PC and the product Ensure the PC supports USB 3 0 Utilizing the Product as a USB HUB Using the
44. nected through DVI HDMI DP and PC AV Mode is set to AV Color Tone has four colour temperature settings Cool Normal Warm and Custom Gamma Adjust the middle level of luminance Model Mode2 Mode3 4 Press A W to move to the option you want and press C buttons D The selected option will be applied SAMSUNG MAGIC Upscale Configuring SAMSUNG MAGIC Upscale 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the MacicUpscale function can enhance the layers of the picture details and the ee corresponding menu screen vividness of the picture Adjust the tint of the screen 2 Press A W to move to Picture and press on the product This menu is not available when macicBri is set to Ci or i TH t lable when Macicbright t to Cinema or Dynamic Contrast mode 3 SAMSUNG Press A W to move to macicUpscale and press on the product This menu is not available when Game Mode is enabled e Off Mode1 Mode2 Enhance picture Comparing with Mode Mode2 has a stronger effect SAMSUNG Brioht detail and MAGICBNO Custom vividness 4 Press A W to move to the option you want and press C buttons Brightness EE 100 Contrast 75 5 The selected option will be applied Sharpness Eo off MAGI CUpscale KE ee a n The displayed image may differ depending on the model HDMI Black Level Configuring th
45. ns The guide shows the function of the button pressed Function Key Guide To access the onscreen menu when the guide is displayed press the corresponding button again The Function Key Guide may vary depending on the function or product model Refer to the actual product Reverse Side The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality POWER IN DP IN HDMI IN DVIIN ss amp PC IN SSS SSS4 Port Description POWER IN Connect the power cord for your monitor to the POWER IN port on the back of the product I ii DP IN Connects to a PC using a DP cable HDMI IN Connects to a source device using an HDMI cable or HDMI DVI cable DVIIN Connects to a source device via a DVI cable The DVI IN terminal is supplied for the digital DVI dedicated models only sse PC IN Connects to a PC using a USB cable a This port can only connect to a PC sse1 S82 Connect to a USB device Compatible with a USB cable version 3 0 or lower Source devices can be charged using these USB ports SSS3 SSSA Connect to an audio output device such as headphones Connect to speakers Installation Attaching the Stand The colour
46. oduct Smart ECO Saving Press A W to move to Reset All and press C on the product PC AV Mode gt Ure Detection Aito Press A W to move to the option you want and press C buttons Key Repeat Time Acceleration um A WwW N The selected option will be applied Reset All p PP lt ee Ye A gt All the menu settings will be reset to default Are you sure you want to reset KE oO The displayed image may differ depending on the model Chapter 07 Information Menu and Others A detailed description of each function is provided Refer to your product for details Displaying Information View the current input source frequency and resolution 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the corresponding menu screen 2 Press A W to move to Information The current input source frequency and resolution will appear Information Picture gt OnScreen Display DVI O System kHz Hz PP HK X e T KKK KEKE KH X Hz Information Picture E gt OnScreen Display HDMI Oh System kHz Hz PP HR K Hy HHH X MEE optima Mode X Hz Information DisplayPort kHz Hz HRK Hy HHH X Optimal Mode x Hz E A The displayed image may differ depending on the model fl a kaad A a Brightness rt ab SAMSUNG Configuring Brigh
47. press 1 C amp on the product This menu is not available when Eye Saver Mode is enabled Adjust the Brightness using the A W buttons Adjust the SAMSUNG brightness level Values closer to 100 Brightness 100 mean a brighter mim A WwW N SAMSUNG Bright Gar The selected option will be applied screen Contrast 75 Sharpness 60 Eoo gt MaGIC Upscale Off lt ee Ye 4 ee gt The displayed image may differ depending on the model Contrast Configuring Contrast 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the Adjust the contrast between the objects and background Range 0 100 corresponding menu screen A higher value will increase the contrast to make the object appear clearer This option is not available when MacieBright is in Cinema or Dynamic Contrast mode Press A W to move to Picture and press on the product This menu is not available when Game Mode is enabled Press A W to move to Contrast and press O C on the product Adjust the contrast Adjust the Contrast using the A W buttons SAMSUNG p level Values closer MAGICBright Csom 5 100 meana Brightness 100 bigger light dark contrast mi BB WwW N The selected option will be applied Contrast 75 Sharpness 0 eo log gt MAGIE Upscale ii lt ee Ye A ee gt The displayed image may differ depending on th
48. product as a hub connect and use various source devices with the product at the same time A PC cannot connect to multiple source devices at the same time as it has a limited number of input output ports available The HUB feature on the product will improve your work efficiency by allowing you to connect multiple source devices to the USB ports on the product at the same time without connecting them to a PC I I 1 peeeeeeeeeeeoeonny If multiple source devices are connected to the PC the many cables around the PC may look messy Connecting the devices directly to the product will resolve such inconvenience Connect a mobile device such as an MP3 player or smartphone to the product when connected to a PC This allows you to control the device from the PC or charge the device battery To detect and start a source device faster connect the device to the USB 3 0 port on the product An external mass storage HDD requires an external power supply Be sure to connect it to a power source Battery charging is possible in power saving mode However it is not possible when the product is powered off To charge a battery make sure that the USB upstream port on the product is connected to a PC via a USB cable Battery charging is not possible if the power cable is disconnected from the power socket Mobile devices should be purchased separately 28 Driver Installation Yo
49. r Mode picture displayed Screen Fit Display the picture with the original aspect ratio without cutting off Game Mode US ASN The function may not be supported depending on the ports provided with the product Response Time Changing the screen size is available when the following conditions are satisfied Picture Size 43 A digital output device is connected using the DVI HDMI DP cable Screen Adjustment 16 9 The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of Screen Fit hese signals This can only be set when the external input is connected through DVI HDMI DP and PC AV Mode is set to AV s a O 4 Press A W to move to the option you want and press J C buttons p D Theselected option will be applied The displayed image may differ depending on the model Screen Adjustment Configuring H Position amp V Position H Position Move the screen to the left or right This menu is only available when Picture Size is set to Screen Fit in AV Mode V Position Move the screen up or down When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally select Screen Fit to adjust horizontal position in 0 6 levels corresponding menu screen 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the Press A W to move to Picture and press C on the
50. r fire may result Do not use multiple products with a single power socket Overheated power sockets may cause a fire Do not touch the power plug with wet hands Otherwise an electric shock may result Insert the power plug all the way in so it is not loose An unsecure connection may cause a fire Connect the power plug to a grounded power socket type 1 insulated devices only e An electric shock or injury may result O Do not bend or pull the power cord with force Be careful not to leave the power cord under a heavy object Damage to the cord may result in a fire or electric shock Do not place the power cord or product near heat sources A fire or electric shock may result Clean any dust around the pins of the power plug or the power socket with a dry cloth A fire may result Do not disconnect the power cord while the product is being used The product may become damaged by an electric shock Only use the power cord provided with your product by Samsung Do not use the power cord with other products e A fire or electric shock may result Keep the power socket where the power cord is connected unobstructed The power cord must be disconnected to cut off power to the product when an issue occurs Hold the plug when disconnect
51. r smoke disconnect the power cord immediately and contact Samsung Customer Service Centre e An electric shock or fire may result Do not let children hang from the product or climb on top of it Children may become injured or seriously harmed If the product is dropped or the outer case is damaged turn off the power and disconnect the power cord Then contact Samsung Customer Service Centre Continued use can result in a fire or electric shock Do not leave heavy objects or items that children like toys sweets etc on top of the product e The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury During a lightning or thunderstorm power off the product and remove the power cable A fire or electric shock may result Do not drop objects on the product or apply impact e A fire or electric shock may result Do not move the product by pulling the power cord or any cable e Product failure an electric shock or fire may result from a damaged cable If a gas leakage is found do not touch the product or power plug Also ventilate the area immediately Sparks can cause an explosion or fire Do not lift or move the product by pulling the power cord or any cable Product failure an electric shock or fire may result from a damaged cable
52. ran ais Italiano lt ee Ye A The displayed image may differ depending on the model Display Time Configuring Display Time 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the Set the on screen display OSD menu to automatically disappear if the menu is is corresponding menu screen not used for a specified period of time Display Time can be used to specify the time after which you want the OSD 2 menu to disappear Press A W to move to OnScreen Display and press 1 C on the product 3 Press A W to move to Display Time and press 1 on the product Set how long the WaR Mindell e 5sec 10sec 20sec 200 sec remain on screen Position for when it is not in 4 use Transparency Press A W to move to the option you want and press buttons Language 5 sec Display Time r D The selected option will be applied sec 20 sec 200 sec lt Ye 4 The displayed image may differ depending on the model Chapter 06 Setup and Reset A detailed description of each function is provided Refer to your product for details The Smart ECO Saving function reduces power consumption by controlling the electric current used by the monitor panel SAMSUNG This option is not available when magicBright is in Dynamic Contrast mode This menu is not available when Game Mode is enabled This menu is not a
53. ress any button on the front of the product to display the Function Key Guide Next press MENU to display the corresponding menu screen Press A W to move to Picture and press on the product Press A W to move to Response Time and press amp on the product Standard Faster Fastest Press A W to move to the option you want and press buttons The selected option will be applied Picture Size Change the picture size In PC mode Eye Saver Mode Game Mode Response Time Picture Size Screen Adjustment ce 82 Oe The displayed image may differ depending on the model Changing the Picture Size 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the corresponding menu screen 2 Press A W to move to Picture and press 1 on the product Choose the size and 3 Press A W to move to Picture Size and press 1 G on the product aspect ratio of the picture displayed on screen In PC mode e Auto Display the picture according to the aspect ratio of the input source e Wide Display the picture in full screen regardless of the aspect ratio of the input source In AV mode In AV mode e 4 3 Display the picture with an aspect ratio of 4 3 Suitable for videos and standard broadcasts Choose the size and 16 9 Display the picture with an aspect ratio of 16 9 aspect ratio of the ahaa p A POIN Eye Save
54. roduct is opera ing in power saving mode Press any key on the eyboard or move the mouse to return to normal operating mode Text is blurry If using a Windows OS e g Windows 7 Windows 8 or Windows 8 1 Go to Control Panel Fonts gt Adjust ClearType text and change Turn on ClearType Video playback is choppy Playback of high definition large video files can be choppy This may be because the video player is not optimized for the computer resource Try playing the file on another video player Issues There is no sound Solutions Check the connection of the audio cable or adjust the volume Check the volume The volume is too low Adjust the volume If the volume is still low after turning it up to the maximum level adjust the volume on your PC sound card or software programme Video is available but there is no sound Sound cannot be heard if a HDMI DVI cable is used to connect the input device Connect the device using an HDMI cable Issues A beeping sound is heard when my PC is booting Solutions If a beeping sound is heard when your PC is booting have your PC serviced Refer to the user manual for your PC or graphics card for further instructions on adjustment Q amp A Question How can I change the frequency Answer Set the frequency on your graphics card Windows XP Go to Control Panel Appearance and Themes Display
55. standard 3 year warranty Samsung guarantee that replacement parts will be available for 5 years after the end of production After 5 years in the event that the Samsung s service centre has run out of replacement parts and cannot repair the product Samsung will replace your product at no additional charge If the model you purchased is no longer available Samsung replace it with the current equivalent model Terminology OSD On Screen Display ____ On screen display OSD allows you to customize on screen settings to optimize the picture quality as required You can change the screen brightness tint size and many other settings using menus displayed on the screen Gamma____ The Gamma menu adjusts the grey scale that represents middle tones on the screen Adjusting the brightness brightens the whole screen but adjusting Gamma only brightens the medium brightness Grey scale___ Scale refers to levels of colour intensity that show variations of colour change from darker areas to brighter areas on the screen Changes to the screen brightness are expressed with black and white variation and grey scale refers to the medium area between black and white Changing the grey scale through Gamma adjustment will change the medium brightness on the screen Scanning rate____ Scanning rate or refresh rate refers to the frequency of screen refreshes Screen data is transmitted as it refreshes to display an image although the refr
56. t press MENU to display the This menu provides an optimum picture quality suitable for the environment corresponding menu screen where the product will be used This menu is not available when Smart ECO Saving is enabled 2 Press A V to move to Picture and press 1 C on the product This menu is not available when Game Mode is enabled This menu is not available when Eye Saver Mode is enabled 3 Press A W to move to MacicBright and press 1 C amp on the product You can customize the brightness to suit your preferences In PC mode Custom Customize the contrast and brightness as required In PC mode tandard Obtain a pictur lity suitable for editing documents or using Internet Picture Soen Standard Obtain a picture quality s g g SAMSUNG B ight picture quality Cinema Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content MAGIC suitable for Brightness Standard the working environment Dynamic Contrast Obtain balanced brightness through automatic contrast adjustment Contrast Cinema Sharpness Dynamic Contrast Color MAG CUpscale lt i VY ee 4 The displayed image may differ depending on the model 32 SAMSUNG In AV mode When the external input is connected through DVI HDMI DP and PC AV Mode is set to AV macicBright has four automatic picture settings Dynamic Standard Movie and Custom that are preset at the factory
57. t notice to improve quality This device is a Class B digital apparatus 69 PowerSaver The power saving function of this product reduces power consumption by switching off the screen and changing the colour of the power LED if the product is not used for a specified period of time The power is not turned off in power saving mode To switch the screen back on press any key on the keyboard or move the mouse Power saving mode only functions when the product is connected to a PC with a power saving function PowerSaver Energy Star Power Consumption Power off Power button Energy Star Test Condition Power Indicator On Off Power Consumption S24E650C 21 0W 0 3 W 27E650C 20 6 W The displayed power consumption level can vary in different operating conditions or when settings are changed ENERGY STAR is a US registered mark of the United States Environmental Protection Agency Energy Star power is measured with the test method in the current Energy Star Standard SOG Sync On Green is not supported To reduce the power consumption to 0 disconnect the power cord Disconnect the power cable if you will not be using the product for an extended period of time during vacation etc Fig U Standard Signal Mode Table Model Name S24E650C S27E650C This product can be set to only one resolution for each screen size to obtain Synchronization Horizontal Frequency 30 81 kHz
58. tings MAG ICBright Custom Sa Brightness 100 Contrast 75 Sharpness 50 Color gt MAGIC Upscale Off lt ee Ye A gt Adjust the red Red B9 saturation level Values closer to Green 50 100 mean greater Blue so _ intensity for the color Color Tone Normal Gamma Mode1 lt ee Ye A ee gt The displayed image may differ depending on the model Configuring Color 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the corresponding menu screen 2 Press A W to move to Picture and press 1 on the product 3 Press A W to move to Color and press 1 CS on the product Red Adjust the red saturation level Values closer to 100 mean greater intensity for the colour e Green Adjust the green saturation level Values closer to 100 mean greater intensity for the colour e Blue Adjust the blue saturation level Values closer to 100 mean greater intensity for the colour Color Tone Select a colour tone that best suits your viewing needs Cool 2 Set the colour temperature to be cooler than Cool 1 Cool 1 Set the colour temperature to be cooler than Normal mode Normal Display the standard colour tone Warm 1 Set the colour temperature to be warmer than Normal mode Warm 2 Set the colour temperature to be warmer than Warm 1 Custom Customize the colour tone When the external input is con
59. tness Contrast s menu is not available when MacicBright is set to Dynamic Contrast mode and Volume from the Initial Screen This menu is not available when Smart ECO Saving is enabled This menu is not available when Eye Saver Mode is enabled Adjust the Brightness Contrast or Volume using the A buttons when the Contrast initial screen that displays no menu screen is displayed is menu is not available when MagieBright is in Cinema or Dynamic Contrast mode This menu is not available when Game Mode is enabled Volume Brightness 100 1 Press any button on the front of the product when no menu screen is displayed to display the Function Key Guide Next press A E gt 2 Press the C button to alternate between the Brightness Contrast or Volume 3 Adjust the Brightness Contrast Volume using the A W buttons The displayed image may differ depending on the model Chapter 08 Installing the Software Easy Setting Box Ei Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections Installing the Software 1 Toinstall the latest version of Easy Setting Box download it from the Samsung Electronics website at http www samsung com 2 Select the Easy Setting Box setup programme 3 When the Installation Wizard appears click Next 4 Follow the instructions given on the screen to proceed with installat
60. u can set the optimum resolution and frequency for this product by installing the corresponding drivers To install the latest version of the product driver download it from the Samsung Electronics website at http www samsung com 1 Click on the Windows Driver downloaded from the website 2 Follow the instructions given on the screen to proceed with installation 3 Select your product model from the list of models 0 SAMSUNG monitor installer 4 Goto Display Properties and check that the resolution and refresh rate are appropriate Refer to your Windows OS manual for further details Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase Select a language on the product and change the resolution on your PC to the optimum setting Setup Guide The optimal resolution for this monitor is as follows HEKKYKRHK HH x Hz Use the above settings to set the resolution on your PC 1 Press A W to move to the language you want and press 1 amp 2 Tohide the information message press MENU or G If the optimum resolution is not selected the message will appear up to three times for a specified time even when the product is turned off and on again The optimum resolution can also be selected in Control Panel on your PC Attaching the sound bar sold separately Refer to the user guide that
61. und bar sold separately 30 Specifications of the sound bar sold separately 31 SAMSUNG MAGIC Bright 32 Configuring SAMSUNG MAGIC Bright 32 Brightness 34 Configuring Brightness 34 Contrast 35 Configuring Contrast 35 Sharpness 36 Configuring Sharpness 36 Color 37 Configuring Color 37 SAMSUNG MAGIC Upscale 38 Configuring SAMSUNG MAGIC Upscale 38 HDMI Black Level 39 Configuring the HDMI Black Level Settings 39 Eye Saver Mode 40 Configuring Eye Saver Mode 40 Game Mode 41 Configuring Game Mode 41 Response Time 42 Configuring the Response Time 42 Picture Size 43 Changing the Picture Size 43 Screen Adjustment 45 Configuring H Position amp V Position 45 Table of contents Coordinating OSD Transparency 46 Changing Transparency 46 Position 47 Configuring H Position amp V Position 47 Language 48 Configuring Language 48 Display Time 49 Configuring Display Time 49 Setup and Reset Smart ECO Saving 50 Configuring Smart ECO Saving 50 Off Timer Plus 51 Configuring Off Timer 51 Configuring Eco Timer 53 PC AV Mode 55 Configuring PC AV Mode 55 Source Detection 56 Configuring Source Detection 56 Key Repeat Time 57 Configuring Key Repeat Time 57 Reset All 58 Initializing Settings Reset All 58 Information Menu and Others Specifications Information 59 Displaying Information 59 Configuring Brightness Contrast and Volume from the Initial S
62. vailable when Eye Saver Mode is enabled System Adjust the power consumption of the product Off Timer Plus to save energy automatically Smart ECO Saving PC AV Mode Source Detection Auto Key Repeat Time Acceleration Reset All lt E Ye 4 The displayed image may differ depending on the model Configuring Smart ECO Saving 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the corresponding menu screen 2 Press A W to move to System and press 1 C on the product 3 Press A V to move to Smart ECO Saving and press 1 C on the product Off Deactivate the Smart ECO Saving function On The power consumption will automatically be reduced by about 10 over the current setting The reduction of power consumption depends on the customer screen brightness condition 4 Press A W to move to the option you want and press 1 C amp buttons 5 The selected option will be applied 50 Off Timer Plus Configuring Off Timer You can set the product to automatically turn off Off Timer 1 Press any button on the front of the product to display the Function Key Guide Next press MENU to display the Enable or disable the Off Timer corresponding menu screen Off Timer Eco Timer Press A W to move to System and press 1 on the product Press A W to move to Off Timer Plus and press C on the product Press A

Monitor User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents