Micro Amp - Jim Dunlop
Contents
1. red LED indicates on e Gain knob adjusts total output volume when micro amp is engaged2. M 133 MICRO AMP DESCRIPTION e Add preset gain using a single stay put knob control e Perfect for switching between guitars with unmatched output e Use in long signal chains or anytime signal dropoff is a problem DIRECTIONS To set up the M 133 plug your instrument into the Input jack and your amplifier into the Output jack Turn on the effect with the footswitch toggle making sure the red LED is ON to indicate that the effect is active Next adjust the Gain knob while toggling the footswitch on and off comparing the volume of the unmodified light off signal with the modified light on signal Match the gain level as closely as you can to the unmodified signal This is your reference point if you plan to make adjustments during your performance it might be useful to mark this position with a piece of masking tape and a marking pen Write on the tape not the stomp box Then adjust the Gain knob to the desired amount of added gain or cut that the situation calls for If you ll need to find this position again during performance make another mark on your tape A common use of the M 133 is to leave it turned off until it s time to solo then kick it in for a quick level boost during the solo You can easily apply it to ANY situation where two different quickly accessible playing volumes are appropriate POWER Single 9 volt alkaline battery or Dunlop ECB03 AC Adapter CONTROLS e Footswitch toggles amp on bypass
Download Pdf Manuals
Related Search