Exor UniOP - Newsletter 20 - esco
Contents
1. UniOP Newsletter 20e01a doc 05 06 2005 Communicate and Stay in Control You will receive pricing information for the new products with the new price list Orders will be accepted after the release of the official pricing information eTOP105 The lowest cost UniOP workstation for Windows CE is now available The new eTOP105 matches the same performance as the other Windows CE workstation The display is the same 5 6 monochrome 1 4 VGA already used in the eTOPO5 The system includes Windows CE 4 2 You will receive pricing information for the new products with the new price list Orders will be accepted after the release of the official pricing information eTOP20B and eTOP21B In the attempt to offer the most complete range of HMI products we are announcing two new UniOP models These new solutions are filling the gap in size performance and price that we currently have between products with 5 6 display and products with 10 4 display The new 7 5 displays with full VGA 640x480 resolution are the ideal choice when the HMI must be very compact but at the same time there is a demand to show the user a large amount of information To further increase the opportunities for your customers two options are available You may notice that the new products will be available as second generation eTOP from the beginning This means they will include all the new features described in this newsletter You may download the pre2. is supported To use CoDeSys you will need to order the new SCM modules SCM03 C Includes CANopen master interface for remote 1 0 SCM11 C Includes Ethernet interface does not support remote 1 0 You will receive pricing information for the new modules with the new price list Orders will be accepted after the release of the official pricing information The user manual for CoDeSys in UniOP is the technical note Tn200 It can be downloaded from the knowledge base The CoDeSys_ software package can be downloaded from the 3S web site It is freely distributed You will need an additional module called the Target Support Package in order to use the software with UniOP hardware The UniOP target file can be downloaded from the knowledge base in the new CoDeSys section Please note that CoDeSys will not replace but complement the current ISaGRAF products Solutions based on ISaGRAF will continue to be available Article IV Video Input The new VMO01 video input module can display up to four video images on the new second generation eTOP panels B Versions The module has 3 standard video inputs PAL NTSC suitable for direct connection to video cameras and one RGB input VGA compatible The connector for the video inputs is the usual BNC while the RGB input is using a standard 15 pin VGA connector UniOP Newsletter 20e01a doc 05 06 2005 Communicate and Stay in Control Adding one or more came
3. EXOR Newsletter ELECTRONIC R amp D Communicate and Stay in Control The year 2005 started with the introduction of a major step in the UniOP products New hardware new software and new solutions to help you stay ahead in the market In This Issue Article l Ethernet Connectivity The B Generation Control Solutions with CoDeSys Video Input Module for B Generation New eTOP with 7 5 Display Solutions for ePALM10 Handheld New Communication Drivers Coming Next Ethernet Connectivity Video Input Module After a long and fruitful period of beta testing the Ethernet connectivity for UniOP is now released We have products out of manufacturing equipped with the new release that started in week 10 The new Designer version was published in parallel The official version number of UniOP firmware including Ethernet connectivity is 5 30 The companion Designer version is 6 04 and available for download from our website The Ethernet features included in this important release are the following Use of fixed IP addresses for connection to the Internet Support of Ping in TCM10 SCM11 and SCM11 C Search identification of UniOP operator panels present in the Ethernet network and pick one for connection Manual definition of the panel IP address and IP parameters in Configuration Mode DHCP client support for dynamic assignment of IP addresses to panels in the network Download upload project files from Designer In the
4. Mode Information retrieved from the panel will be saved to the disk in a table in csv format UniOP panels support dual driver communication over the Ethernet port in addition to all of the above features This would allow achieving very complex and powerful HMI and communication architectures based on UniOP Ethernet connectivity requires one of the following communication modules in UniOP e TCM10 e SCM11 e SCM11 C Make sure the firmware version of the SCM11 is up to date Other Features introduced with UniOP firmware 5 30 Firmware 5 30 and Designer 6 04 include also some other interesting features Support of 256 colors for all screen objects in panels with TFT display It is now possible to use 256 colors obviously when supported by the display for all screen objects text and touch buttons included Power up macros You can define a sequence of macro commands that will be automatically executed one time when the panel starts Very useful to initialize parameters and to choose what page will be first shown to the user Password protection for macros It is now possible to request the introduction of a password in the middle of a sequence of macros Details on all minor changes and bug fixes will be published as usual at the moment of the official release on our website Article Il The B Generation Four years since they have been introduced the high end eTOP panels are receiving a major performance impr
5. Moeller XC e GE Fanuc Series 90 e ISaGRAF More implementations are likely to come in the future You may download the driver file D32uplc200 dll and the technical note Tn206 1 from the Knowledge Base CANopen HMI requires TCMO9 Connect to Compumotor 6K This new driver has been designed for connection to the Parker Compumotor 6K motion controllers The driver has been included in the existing D32uplc047 dll You may download the driver file from the web site XxX OR Newsletter CRONIC R amp D Article VI Coming Next Support for Far East languages While the introduction of Ethernet programming in Designer and firmware has been completed we are already working to the next release Designer and some panel types will include support for Far East languages such as Chinese Japanese and Korean Designer will natively support TrueType fonts for use in touch buttons and text boxes The native support coupled with the Unicode text export import will make very quick and easy to build multilingual applications that include Far East languages We expect the new Designer version as well as new firmware to be available 3 Quarter of this year Those interested in participating to the beta test phase should enquiry m m f UniOP Newsletter Issue 20a Copyright 2005 Sitek S p A Verona Italy Subject to change without notice The information contained in this document is provided for informational purposes only Whil
6. case of products with FW58 the project transfer speed over an Ethernet connection is matching the speed that can be achieved with UniLOAD connected to the parallel port Change UniOP mode Designer can switch UniOP from Operation Mode to Configuration Mode It is possible to upgrade the application in UniOP without manual interventions on the panel UniOP Newsletter 20e01a doc 05 06 2005 Communicate and Stay in Control Update firmware with Designer and UniDataExchanger Access recipe data for reading and writing with UniDataExchanger Read trend buffers with UniDataExchanger Read alarm and event buffers with UniDataExchanger Support of panel clock synchronization using SNTP Simple Network Time Protocol It is now possible to build an automation system completely based on Ethernet for the communication Program the HMI with Designer Program the PLC with either of our PLC programming packages Connect the HMI to the PLC Data acquisition from higher level systems with the UniNet OPC Server The companion application UniDataExchanger is also included in the release The new version allows all firmware upgrade operations to be performed over Ethernet M XO A ELECTRONIC R amp D Newsletter In addition it offers the following new functions e Access recipe data for reading and writing e Read trend buffers e Read alarm buffers All these new functions are also available when the panel is in Operation
7. e efforts were made to verify the accuracy of the information contained in this documentation it is provided as is without warranty of any kind www exor rd com UniOP Newsletter 20e01a doc 05 06 2005 6 Communicate and Stay in Control
8. ervices supported by Simatic Ethernet It allows connection to S7 300 and S7 400 equipped with CP343 1 and CP443 1 communication modules or to the CPUs with integrated Ethernet port This protocol is based on TCP IP and requires SCM11 At the moment we support only connection at 10Mb You may download the driver file D32uplic178 dll and the technical note 1Tn195 0 from the Knowledge Base UniOP Newsletter 20e01a doc 05 06 2005 Communicate and Stay in Control Connect to Mitsubishi Q Series PLCs Connect to the programming port of the Mitsubishi Q series PLCs with this new driver You may download the driver file D32uplc201 dll and the technical note Tn205 0 from the Knowledge Base More flexibility and performance from the CANopen HMI driver The existing CANopen driver has been quite successful as we can measure from the number of applications we had in the last couple of years The experience has shown how the CAN communication between controllers and HMI can be improved and optimized The new CANopen HMI driver is based on PDO communication rather than SDO as the older one and offer more flexibility and higher performance while reducing the processing load on the controller The HMI is now working as a client instead of as a server The Controller needs a simple program to work as a server This program is fairly simple to implement in any controller type Currently we have working samples for connection to e CoDeSys e
9. liminary datasheet Tn203 0 from the web site You will receive pricing information for the new products with the new price list Orders will be accepted after the release of the official pricing information with the availability terms indicated XO A CTRONIS R amp D m Newsletter m f TCM15 and TCM16 The dual protocol function has proved to be very effective and useful in real applications but cannot be used if the panel has only one serial communication port The new TCM15 and TCM16 modules will help step over this limitation The new modules will add one more communication port to panels like the ePADO3 ePADOS5 and eTOPO3 Please note that the new functionality will not be available for ePADO4 and ePADOE6 The additional communication port will be available on the Aux Port The TCM15 has an RS 232 interface while the TCM16 has an RS 422 RS 485 interface Availability is now pricing will be sent out soon Please note to use this in the ePADO3 ePADO5 and eTOP03 you need to order the H W version 39C or later Hardware currently in stock and in the field is not compatible with these modules New Communication Drivers New interesting UniOP communication drivers are now being introduced Several other drivers have been improved or fixed You may find detailed information in the knowledge base Connect to Simatic S7 via Ethernet This communication driver is a complete implementation of the PG OP communication s
10. o the 8 16 MB Flash Cards will no longer be offered and replaced by the 32 MB Card e Models with TFT display support backlight dimming This is a plus for all applications that require reducing the brightness of the screen for better readability and user comfort The brightness can be reduced by a factor of about 50 XO A ELECTRONIC R amp D m Newsletter The eTOPs second generation will maintain the current model name adding the letter B as suffix For instance eTOP33 0050 will become eTOP33B 0050 Orders will be accepted after publication of the new price list We expect start of the deliveries in week 22 or the April May timeframe The phase out of the older products will be completed by weeks 27 28 or in June Article Ill Control Solutions with CoDeSys The HMicontrol family of products is being extended with a new powerful option that will make it even more interesting and competitive The CoDeSys software PLC from the German company 3S is now available for embedding in UniOP CoDeSys offers a powerful and feature rich programming environment The compiler technology for the PLC program powers the MIPS in the SCM modules resulting in excellent execution times Multiple system configurations are possible and the flexibility makes the system even more powerful e Compact HMlcontrol systems with on board I O and full communication capability e HMlcontrol systems with distributed l O currently CANopen
11. ovement The panels with firmware type 58 such as the eTOP10 eTOP33 eTOP40 and eTOP50 will be equipped with a brand new CPU and the firmware will become type 60 The new CPU board brings the processing power of a 200 MHz 64 bit MIPS processor and includes a number of interesting new features e 64K colors are supported in all TFT displays This is corresponding to the 16 bit color option in Windows The higher number of colors is supported for all imported images Photorealistic images are stunning e Video input option to display images from video cameras and or a computer Display up to four independent and simultaneous images using the VMO10 optional external video input module Images can be easily resized and cropped See more details below e The second generation eTOP panels will include 32MB of internal non removable Panel Memory The Panel Memory will contain everything currently included in the SSFDC card The internal Panel Memory will UniOP Newsletter 20e01a doc 05 06 2005 Communicate and Stay in Control increase the reliability of the panel when working in harsh environments And you will not have to trade reliability for flexibility as the T2003 hardware still includes a Flash Card socket Using the 32 MB optional flash card it is possible to update application and firmware in much the same way as current product Please note that the removable Flash Card will no longer be part of the standard delivery Als
12. ras to an HMI panel turns it in the ideal solution of for monitoring and surveillance applications in the most various fields such as marine and building automation The datasheet for the VMO10 is available for download as Tn203 EXOR ELECTRONIC R amp D Newsletter Article V New Products and New Solutions New products and solutions are available to extend the UniOP product range and the application opportunities ePALM10 for Special Applications The connection cable is one of the critical points in mobile systems To achieve sufficient reliability in all conditions for most networks a special high speed cable is required To increase the performance of the ePALM10 in network applications it is now available in more versions built with the special cable to ensure full performance and reliability in the network connection The focus for these special products are Profibus DP and Ethernet In addition to the networking issues new ePALM10 options are available to respond to the market requesting enabling switches implemented with 3 position dead man devices The new products have been designed to fulfill the new safety requirements The follo wing new products are released m k is meterc p The completely new product manual called Tn202 0 and containing a complete description of all models is available for download from the web site The short form datasheet is available as Tn151
Download Pdf Manuals
Related Search