Home

warning!

1. Don t let yourself be distracted while cooking If you do have a fire in the kitchen don t take any risks get everyone out of your home and call the Fire Service If a pan catches fire Do not move it as it s likely to be extremely hot e Turn off the heat if it s safe to do so but never lean over a pan to reach the controls Use fire blanket or a damp tea towel to cover the pan If you have put the fire out leave the pan to cool completely Deep fat frying presents more dangers in your kitchen e Never fill a pan or other deep fat fryer more than one third full of oil Do not use a fire extinguisher on a pan of burning oil the force of the extinguisher can spread the fire and create a fireball If you have an electrical fire in the kitchen Pull the plug out or switch off the power at the fuse box this may be enough to stop the fire immediately e Smother the fire with a fire blanket or use a dry powder or carbon dioxide extinguisher Remember never use water on an electrical or cooking oil fire Avoiding damage to the appliance The ceramic glass of the hob can be damaged by objects falling onto it Be especially careful with heavy jars of food being stored in cupboards above the hob we recommend storing them away from the hob area The edge of the glass can be damaged by being knocked by cookware Cookware made of cast iron cast aluminium or with damaged bottoms can
2. H and O will flash alternatively if the cook zone is hot and another cook zone is in use lock When the system is in child lock the controls are deactivated To lock and unlock the hob touch and hold the key symbol Safety shut off If the power level of a zone is not changed for a long period of time the cook zone will automatically switch off The maximum time a cook zone can stay on depends on the power level 10 oO oN DOD OT FB Ww NB e N N N U A 0 0 10_ Using the hob User manual LAM1741 04 Cleaning amp maintenance Ceramic glass hobs It is recommended that you clean and wash function of the appliance the hob surface before using for the first time Apply a thin coat of ceramic hob cleaner to the Safety when Cleaning hob to help maintain and protect it e For cleaning the appliance must be switched The ceramic hob top can be cleaned using a off and cooled down clean damp cloth or kitchen paper Do not use a used dishcloth or sponge as they can leave a film of detergent on the surface which can lead to discoloration Please ensure that the elements are cooled fully to avoid steam burns A Risk of burns from residual heat You can use a specialist ceramic cleaner to restore the surface but use sparingly to avoid coating the hob top too thickly Too much cream cleaner will lead to discolouration Use a dry clean cloth to polish the surface e For stubborn marks a
3. LAM1741 Ceramic Touch Control Hob F CORON User amp Installation Guide LAMO NA Exclusive to Howdens Joinery Co LAMONA Appliances Dear Customer Congratulations on your choice of hob which has been designed to give you excellent service The user manual will help you use your product quickly and safely Please read this user manual before installing and using the hob Always follow the safety instructions e Keep this user manual within easy reach for future reference Please read any other documents supplied with the product Remember that this user manual may also applicable for other models and there maybe some minor differences between the illustrations and your product Explanation of symbols Throughout this user manual the following symbols are used A Important information or useful tips about usage A Warning for possible hazards to health and property A Warning possibility of electric shock This product s packaging material is recyclable Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose Your product also contains a great amount of recyclable material It is marked with this label to indicate the used appliances that should not be mixed with other waste This way the appliance recycling organised by your manufacturer will be done under the best possible conditions in compliance with European Directive 2002 96 EC on W
4. I N Immer adjust indicator LED s ect All 4 cooking zones can be operated under the timer independently and at the same time for up to 99 minutes When the set time expires the timer will beep and the cook zone will switch off automatically To set the timed cooking to a zone e Set the desired zone power level as described previously e Whilst the cook zone power level is flashing touch the timer key and the timer will illuminate 00 and two Red LEDs will illuminate the first one will be flashing on the timer to indicate the activated timed cook zone and the second one 00 Indicates that the time can be adjusted e Using the or symbols set the time required in minutes To check remaining time Touch the symbol for the desired zone followed by the timer symbol To adjust the set time Touch the symbol for the desired zone followed by the timer symbol Using the or symbols reduce or increase the time required in minutes To deactivate timed Cooking Touch the symbol for the desired zone followed by the timer symbol Adjust the symbol down to 0 At the end of the cooking time At the end of the cooking time the buzzer will activate and the zone s LED will flash Touch the zone key to deactivate Residual heat indicator If the glass surface is hot an H will be displayed in the cook zone display until the glass has sufficiently cooled A
5. Up down keys Then either touch the cook zone key again to confirm the setting or after 5 10 seconds the hob will auto set the hob power and will beep and stop flashing To adjust the power setting follow steps 3 5 Repeat as necessary for the other zones Switching a zone off Touch the required cook zone key until the zone display flashes now either return the power level to O by pressing the down key or simultaneously press the down and up simultaneously and it will jump straight to the O setting Notes on use The power settings on the hob do not indicate any set temperature and cannot be used to judge one element against another During cooking the elements will cycle on and off This is normal Auto heat up Select appropriate cook zone and increase to power level 9 Now press the up key again and until the Red LED is illuminated next to the cook zone The power level will still be flashing so now select the power level you would like use the heat up time table for guidance Once set the Red LED is illuminated Once the heat up time as elapsed a beep will sound and the Red Led disappears and the heater remains at the reduced level Time Mi Seo 1 01 11 Ba 2 02 44 a 3 04 47 2 4 05 28 oO 5 06 29 F 6 01 11 2 7 02 44 oO T 8 02 44 Using the hob _ 09 LAMONA Appliances Timed cooking Timer Kerered zone
6. scratch the ceramic glass if pushed across the surface Objects that melt and things that boil over can burn onto the ceramic glass and should be removed as soon as possible To avoid damage to cookware and the ceramic glass do not allow sauce pans or frying pans to boil dry Do not use the cooking zones with empty cookware or without cookware in place 06_ Safety User manual LAM1741 _07 LAMONA Appliances 03 Using the hob electric ceramic Touch Controls Initial set up The touch controls for your hob have been designed to provide you with finger tip control of your hob providing accurate and repeatable power settings for cooking and an easy clean surface that can be easily wiped over When a cook zone is activated the power setting is displayed for each zone individually Controls layout Upper Right Zone Lower Right Zone Plus Power Level Time Lock a Referred Zone x4 b Minute Minder Fault code c Upper Left Zone d Lower Right Zone e Minus Power Level Time f Power On off g Timer h i j k ow Before switching on the power supply to the appliance switch off any bright lights such as cooker hood and ensure the appliance is not in direct sunlight This is to enable the electronic controls to calibrate its sensitivity against natural ambient lighting approx 30 seconds Failure to observe the above will result in the hob not funct
7. specialist hob scraper or cleaner can be used e Do not use steam cleaners or high pressure cleaning equipment Regular cleaning will prevent any salts or minerals from accumulating on your hob and discolouring the glass Wipe any spillage as soon as possible Clean the hob top as regularly as possible this will prevent any build up of grease which may be a fire hazard Foods with high sugar content toffee fruit juice jam etc that boil over while cooking or spattered sugar stains must be immediately removed using a scraper even if hot Notes The edge of the ceramic glass will always appear to be a different colour than the top surface due to the ground safety edge Scratches or dark stains onthe ceramic glass that cannot be removed do not affect the Cleaning and maintenance _ 11 LAMONA Appliances 05 Trouble shooting If you encounter a problem it is often something or please read some of the suggested tips below The hob is not working Check the fuse circuit breakers to see if you are experiencing a power failure The hob has turned itself off Check that the main on off switch has not been touched or covered accidentally remove any objects on the hob and try turning it back on again Repairs Repairs are to be carried out by trained service technicians Display F and letters If F and letters appear on the display your unit has detected a fault the following table lists act
8. arance of at least 50mm should be maintained between the cutout and any rear or side wall The worktop must be of heat resistant material or covered with heat resistant material Protecting the cut out The types of chipboard used for work surfaces swell relatively quickly in contact with humidity Apply a suitable sealant to the cut edge to protect it from moisture ingress Self Adhesive Seal Apply the self adhesive seal to the underside edges of the hob glass For best results the seal should be adhered along each side in turn as close to the edge as possible and trimmed at each corner taking care to ensure a neat join This hob can be installed conventionally glass above the work top or recessed into the work top for a flush fit Conventional Installation Install the 4 spire clips shown in fig 1A Place the hob in the aperture checking the hob glass is covering the work top along all four sides Set the front edge of the appliance parallel with the front of the work top Locate and attach the securing clamps as required Tighten the screws so that the hob is pulled down firmly against the worktop thus ensuring a good seal Recessed method Recess the work top to the appropriate depth Approx 5mm and shape to fit the hob add 1mm to overall glass size Install the 4 spire clips shown in fig 1A Insert the hob into the recess ensuring that the foam seal is sitting correctly Locate and attach the secu
9. aste Electrical and Electronic Equipment Contact your town hall or your retailer for the used appliance collection points closest to your home We thank you doing your part to protect the environment User manual LAM1741 Index 01 Before Using the hob 02 Safety General Fire safety advice Fire Safety If a pan catches fire Deep fat frying If you have an Electrical Fire 03 Using your hob Touch controls Controls layout Initial setup Functions Timed cooking Safety shut off 04 Cleaning and Maintenance Ceramic hob glass 05 Trouble Shooting 06 Installation General Information Positioning Connect to the electricity supply Technical Data 07 Your guarantee 04 04 05 06 06 06 06 06 08 08 08 08 09 10 10 11 11 12 13 13 13 16 17 18 Index _ 03 LAMONA Appliances 01 Before using the hob Make sure that you have removed all packaging wrappings stickers and films from the hob surface It is recommended that you clean and wash the hob surface before using for the first time Apply a thin coat of ceramic hob cleaner to the hob to help maintain and protect it 02 Safety A AWARNING The appliance and its accessible parts become hot during use Care should be taken to avoid touching heating elements Children less than 8 years of age shall be kept away unless continously supervised This appliance can be used by children aged from 8 years an
10. ce must be protected from damage e g draws may only be installed providing a partition panel is fitted maintaining the 25mm gap underneath the appliance Installation above an oven Refer to the manufacturer s instructions for clearances above the oven We recommend a minimum 25mm gap between the bottom of the hob and appliance me oven or partition Clearances and dimensions requirements No shelf or overhang of combustible material should be closer than 650mm above the hob There must be a minimum clearance of SOMM between the edges of the hob and any side walls this clearance must be maintained up to 420mm above the worktop Installation _ 13 LAMONA Appliances e When installing an extractor hood above the hob refer to its manufacturer s instructions Clearances and dimensions requirements There must be a minimum clearance of 50mm between the rear edge of the hob and the rear wall This clearance must be maintained up to 650mm above the worktop unless otherwise stated in your extractor manual Minimum distance between carcasses must be equal to width of hob 420mm min Km 50mm min 50mm min between hob and rear wall gt 60mm to cut out aperture 50mm Min Minimum height to extractor as recommend in extractor instruction manual Fitting into worktop Cut a hole in the work surface to the required size 560mm x 490mm as illustrated above A cle
11. d above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children without Supervision A WARNING Unattended cooking on a hob with fat or oil can be dangerous and may result in fire NEVER try to extinguish a fire with water but switch off the appliance and then cover the flame with a lid or damp cloth AWARNING Metallic objects such as knives forks spoons and lids 04_ Before Using the hob User manual LAM1741 should not be placed on the hob surface since they can get hot A WARNING Danger of fire do not store items on the cooking surface A WARNING Never leave any cook zone on without a pan covering it This causes a fire hazard A WARNING If the surface is cracked broken or shattered switch off the appliance to avoid the possibility of electric shock and call for a service engineer s visit General A WARNING Servicing should be carried out only by authorised personnel A WARNING Do not spray aerosols in the vicinity of this appliance while it is in operation A WARNING Do not store or use flammable liquids or items in the vicinity of this appliance AWARNING Do not mo
12. dify this appliance General e Always ensure that pan bases are dry stable and flat before using them on the hob Always match the size of pan to the cook zone do not use large pans on small zones or vice versa Always position pans over the centre of the cook zone and turn the handles to a safe posi tion so they cannot be knocked or grabbed Always lift pans onto and off the hob rather than sliding them across the surface to avoid marks and scratches This appliance should only be used for normal domestic cooking of food Never use the hob for any other purpose than cooking food Plastic cooking utensils can melt if they come into contact with a warm hob Never leave them close to or on top of the hob Safety _ 05 LAMONA Appliances Never use the hob surface as a chopping board or food preparation area as this may lead to it becoming damaged Never leave aluminium foil on the hob top it reflects heat back into the element which leads to damage Never heat up a sealed tin of food on the hob as it may explode e Never leave pans overhanging the edge of the hob The surface of the hob is smooth If pans are knocked they may move on the hob top Fire safety advice Most kitchen fires occur when people are distracted or leave things unattended so remember If you re called away from the hob by the phone or someone at the door either take pans off the heat or switch off your hob
13. er manual LAM1741 19 LAMONA Appliances Notes 20_ User manual LAM1741 Notes 241 082760603 4 If supplied please stick your self adhesive product rating plate here or make a note of the product serial number below in the box below for future reference SEEEN oss tsectatesackesdazescssscssetantestescssctacesacxsiectefactasersesnessecaduesaatsetacszes GEN Cd HOWDENS JOINERY CO MAKING SPACE MORE VALUABLE FSC This brochure is printed on FSC certified paper
14. ioning correctly Display showing FL To rectify remove all strong lighting sources and re apply power The hob should complete the calibration procedure satisfactorily and lighting such as cooker hoods can be used normally D Q 08_ Using the hob User manual LAM1741 Functions Lock A Red Led indicates when the key lock is active to deactivate activate touch the Key Lock key for 1 second The key lock is deactivated when the Red LED switches off If any of the cook zones are ON the key lock function locks all the keys except the ON OFF key e If the cook zones are OFF the key lock function locks all the keys including the ON OFF key A The Key Lock is automatically activated every time the electricity supply is switched off and back on to the hob A To avoid unintentional switching on of the appliance e g by small children and pets we recommend activation of the key lock feature Switching on the hob Touch and hold the on off symbol for 1 sec The hob will beep and all energy level indicators will display 0 e If no other symbol is selected within 10 secs the hob will turn off Operating a zone Ensure the Key lock is deactivated Touch the On Off Key for 1 second a beep sounds and the cook zone displays become illuminated Touch the required cook zone key it will start to flash Whilst flashing adjust the cook zone power level as required by using the
15. ions you should take to correct the problems Error codes Hob Status Fault Description Action Codes H will switch off when Residual Heat glass surface drops below 600C A Fault Description Action FO Touch Control Error el on The system will reset and the hob should FA Touch Control Error en on The system will reset and the hob should FU Touch Control Error en on The system will reset and the hob should FJ Touch Control Error een on The system will reset and the hob should FC Touch Control Error ee on The system will reset and the hob should Fr Touch Control Error Re on The system will reset and the hob should Foor F Overheat Temperature Problem Allow hob to coot then Switch the power ft and on The system wil Fe Overheat Temperature Problem Allow hob to cool then Switch the power off and on The system wil mt Overheat Temperature Problem lo hob to coo then Suiten the power off and on The system wil FL Poor Ambient Light Conditions Switch off lighting in area Clean hob surface Switch the power off and on The system will reset and the hob should now be working correctly If any of the above problems persist please contact the customer service line for further assistance 12_ Trouble shooting User manual LAM1741 06 Installation General information Positioning Installation should only be carried out by a qualified installer or engineer Please keep to the follo
16. ring clamps to the front and rear underside of the hob using the screws provided Tighten the screws so that the hob is pulled down firmly against the worktop thus ensuring a good seal You may want to fill any gap between the hob top glass and the work top surface with silicone sealant A DO NOT fit silicone sealant under the glass hob instead of foam seal 14_ Installation User manual LAM1741 CONVENTIONAL INSTALLATION I Worktop Hob 1 Self adhesive seal RECESSED METHOD 1 Self adhesive seal 2 Silicone sealant Fixing brackets A Installation advice Depending on the cabinets the worktop thickness and the hob positioning it is possible for the hob base and or the clamp brackets to interfere with parts of the cabinet If necessary cut away cabinetry and use appropriate fixing brackets for your installation Underside of hob Typical Installation positions N NZ Typical Installation positions Secure the hob to the worktop by means of the brackets provided taking the thickness of the worktop into account fig 1A E P LT Hep Worktop 30mm GE LS Spire Clip Hob Worktop 40mm EG Hob Worktop 50mm Installation _ 15 LAMONA Appliances Connect to the electricity Supply A This appliance must be earthed Only connect to the electrical mains terminal with the power switched off The electrical mains terminal is live Follow the te
17. rminal block connection schematic Loose and inappropriate connections can make the terminal overheat Ensure the cable clamp is fitted correctly and securely A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening of at least 3mm We recommend that the appliance is connected by a competent person who is a member of a Competent Person Scheme who will comply with the required local regulations Connection should be made with a suitable cable A Ensure that you route all mains electrical cables well away from any adjacent heat source such as an oven or grill Firstly open the terminal block cover using a small flat bladed screwdriver in the door release tabs shown Strip the wires amp connect to the terminal block as shown in the terminal block schematic Fit the cable clamp amp secure with the screw provided Close the terminal box ensuring that the cover is closed and all screws are tight and in place Note The cable clamp has a ratchet type mechanism on the right hand side of the retaining arm 1 Door release tab B Cable clamp ratchet E Cable clamp screw Terminal Block Connection Schematic BROWN L1 Live 230V 240V mu BLUE N Neutral GREEN YELLOW PE Earth 16_ In
18. stallation User manual LAM1741 Technical data Technical D Electrical Supply 220 240V 50Hz Total Power Rating 220 240V 50Hz kW 5 8 kW Hob Details Normal Power Cook Zone Rating kW LH Front 2 1 LH Rear 1 2 RH Rear 1 8 RH Front 1 2 Hob Dimensions W X D X H mm 590 x 520 Cut Out Required W x D mm 560 x 490 Cable Type HORR F5 4 0mm 2 3 core or equivalent Installation _ 17 LAMONA Appliances 07 Your guarantee Product Guarantee Details UK only Your appliance has the benefit of a comprehensive manufacturer s guarantee which covers the cost of breakdown repairs Details of which are shown on your Proof of Purchase Document Any claim during the period of the guarantee MUST BE ACCOMPANIED BY THE PROOF OF PURCHASE e The product must be correctly installed and operated in accordance with the manufacturer s instructions and used for normal domestic purposes e This guarantee does not cover accidental damage misuse or alternations which are likely to affect the product e The guarantee is invalid if the product is tampered with or repaired by any unauthorised person The guarantee in no way affects your statutory or legal rights What to do if you need to report a problem Please ensure you have ready The product s model amp serial numbers Howdens Proof of Purchase document Your full contact details Call the Service Line on 0845 00 60 006 18_ Your guarantee Us
19. wing points most carefully Although every care has been taken to ensure this appliance has no burrs or sharp edges we recommend that you wear protective gloves when installing and moving this appliance This will prevent injury The minimum distances to other appliances and units are to be observed Wall surfaces above the work surface and in the immediate vicinity of the cooking hob must be heat resistant Laminated surfaces and the adhesive used for fixing them must be heat resistant in order to avoid any damage The space for air circulation located underneath and at the back of the hob improves its reliability by ensuring that it will cool down efficiently Installations should be carried out in line with the National Regulations applicable with this product type Note Avoid installing the appliance next to doors and under windows This will avoid the potential for hot cookware being knocked off the hob when doors and windows are opened Risk of burns Built in appliances may only be used after they have been built into suitable built in units and surfaces that meet the required standards Choosing your installation We recommend that you install this appliance in a work top which is a minimum 38mm deep The hob can be fitted into a work top less than 38mm deep but the 25mm gap between hob base and appliance must be maintained Installing the hob over a unit with a drawer or door The base of the applian

warning!

Contents

Download Pdf Manuals

Related Search

Related Contents