Leica IMS500 HD Manual
Contents
1. Blank single students screen To blank single screen press BLANK and select student s key to blank the screens Video Scanner of students screens Hold down the ALT key while pressing the ALL key The instruc tor receives all students screens sequentially for about 3 seconds In the case of the Wireless Tablet Control do not hold down the Alt icon Simply press the Alt icon first then the All key Manual Additional Keypad functions for IMS500 HD Advanced Systems with computers and remote control Remote control of student 1 computer To control students 1 keyboard Lock all keyboards and mice Hold down the ALT FUNCT key while pressing the KEYB LOCK key to lock all student s keyboards and mice and mouse A students screen No video transmission is required must first be transmitted to the In the case of the Wireless Tablet instructor REMOTE Control do not hold down the Alt icon Simply press the Alt icon first then the Keyboard Lock key Remote control of all student computers To control all students keyboards and mouses hold down the ALT FUNCT key while pressing the REMOTE key REMOTE In the case of the Wireless Tablet Control do not hold down the Alt icon Simply press the Alt icon first then the Remote key Leica IMS 500 Manual 16 Instructions for the Wireless Tablet Control Option Before using the tablet for the first time you must charge Unauthoriz2. components that are outside of the content of this manual Unauthorized alterations to the device or A noncompliant use shall void all rights to any warranty claims Transport If at all possible use the original packaging for shipping or transporting individual modules In order to prevent damage from vibrations disassemble Manual all moving parts that according to the user manual can be assembled and disassembled by the customer and pack them separately Disposal Disposal must comply with locally applicable laws and regulations Integration in third party products When installing Leica products into third party products the manufacturer of the complete system or its dealer is responsible for following all applicable safety instructions laws and guidelines Power Cords 10280636 10445661 10445662 10445663 10447346 10450012 10450013 10450014 10450015 10450016 10450017 Power cable 2 5 m Switzerland Power cable 2 m USA Power cable 2 m EURO Power cable 2m 2 5 m BS Power cable 2 m Japan Power cable 2 m Argentina type K Power cable 2m Australia type F Power cable 2m China type L Power cable 2m Israel type Power cable 2m Italy type E Power cable 2 m South Africa type D Information for the person responsible for the instrument Information for the person responsible for the instru ment Ensure that the Leica IMS500 HD system is used only by qualified personnel Ensure tha
3. 101515 25 35 45 module 35101710 or antenna cable for Wireless Tablet Controls 35101907 09 S DVI Central Unit cable 35101802 06 10 15 20 Second Leica camera or PC with DVI output Quick Start General information The instructor s and the student s keys may have a choice of 3 functions Off transmit and receive The first key selected after VIDEO OFF becomes the transmitter The next keys selected become the receiv ers Hit a receiver s key again to deselect it The transmitter is indicated by flashing light receivers by permanent light To select a new transmitter hold the key pressed down for about 1 second or reset the system VIDEO OFF and start a new input sequence IMS500 HD Manual 13 Keypad functions Clear amp Reset the system Instructor to selected students Student 1 to all students The system is cleared and all selections are turned off A new input sequence can be entered by selecting a key e g instructor or any student who becomes the transmitter Then select the keys of the receivers of this screen image e g Student 1 Instructor to all students All students receive the instruc tors screen image The instruc tor s screen is automatically set as transmitter if there is no other transmitter selected INSTR Press INSTR S1 to select the instructor as transmitter Student 1 will receive the instructor s screen image Other students may
4. Layout Creator With the layout creator you can create your own seating arrangement or change an existing seating plan After starting the layout creator a selection menu appears Now you can choose the antenna room whose plan you want to create or change IMS500 HD Select Room Classroom 1 Classroom 2 Classroom 3 Classroom 4 Classroom 5 Classroom 6 Classroom 7 Manual If you have chosen an antenna or room the current plan will be shown If there is no existing plan an empty plan will be shown to create a new one IMS500 HD Manual 24 Add a student At the touch on an empty field a selection menu Please choose a student number appears to choose a student number for that field IMS500 HD Manual 25 A selected student button 51 S2 will be shown in the plan seating arrangement Remove a student If you want to remove a student number just touch the respective button on the tablet until it will be removed from screen Save layout To save all settings open the option menu and choose Save Layout IMS500 HD Manual Close Close Layout Creator To close the Layout Creator open the option menu and choose Close You will return to the main menu When you select the appropriate classroom you will see the changes you made IMS500 HD Manual 27 Specifications IMS500 HD Keypad Type KP15 DVI Type KP25 DVI Type KP35 D
5. Leica IMS500 HD Manual eca MICROSYSTEMS Contents Safety regulations 3 Safety concept 4 Symbols used in this operating manual 4 Important Notes 5 Instructions on use 6 Information for the person responsible for the instrument 7 Care instructions 8 Accessories maintenance and repair 9 Electrical data and ambient conditions 10 Unpacking 10 Installation 11 IMS500 HD Installation Basic System without Computers 12 Quick Start 13 Keypad functions 14 Additional Keypad functions for IMS500 HD Advanced Systems with computers and remote control 16 Leica IMS500 IMS500 HD Instructions for the Wireless Tablet Control Option Layout Creator 22 Close 27 Specifications IMS500 HD 28 Manual Safety regulations Safety concept This operating manual describes the special functions of the individual modules of the Leica IMS500 HD Systems Interactive Microscopy System and contains important instructions for their operational safety maintenance and accessories You can combine individual system articles with articles from external suppliers Please read the user manual and the safety requirements of the supplier Before installing operating or using the system read the user manual In particular please observe all safety instruc tions To maintain the unit in its original condition and to ensure safe operation the user must follow the instructions and warnings contained
6. VI Dimensions W H D 12 5x 4x 17cm 15x 4x 21cm 19 5 x 4 5 x 22 cm Weight ca 400 g ca 550 g ca 700 g Power 5VDC and 10VDC supplied by Central Unit Connection 9 Pol serial RS 232 Dimensions of keyboard only no cables plugs Central Unit CU6 DVI CU10 DVI CU20 DVI CU32 DVI Dimensions W H D 14x 14 5 x 21 cm 24 x 15 x 28 cm 34 x 15 x 28 cm 45 x 15 x 28 cm siii Pee Weight max 2 7 kg max 3 6 kg max 5 4 kg max 10 kg Power Consumption max 50 W max 100 W max 200 W max 200 W Power source 110V 240V AC 50 60 Hz Cooling Ajustable fan Cables DVI D male male 24 1 prefabricated 1m up to 30 m Boxes Teacher DVI Box 19 5 x 2 5 x 12 5 cm 445 g 5V DC Charger Boxes Student DVI Box 11 5 x 2 5 x 10 5 cm 250 g 5V DC Charger IMS500 HD Manual 28 The statement by Ernst Leitz in 1907 With the User For the User describes the fruitful collaboration with end users and driving force of innovation at Leica Microsystems We have developed five brand values to live up to this tradition Pioneering High end Quality Team Spirit Dedication to Science and Continuous Improvement For us living up to these values means Living up to Life INDUSTRY DIVISION The Leica Microsystems Industry Division s focus is to support customers pursuit of the highest quality end result Leica Microsystems provide the best and most innovative imaging systems to see measure and analyze the micro
7. also be added to this selection as receivers by pressing INSTR Sx View students work Student 1 is selected as transmit ter and the instructor is automati cally set as receiver If there was still any transmitter selected when pressing 1 student 1 will be selected as receiver Student to Student Student 1 is selected as transmit ter other Students can be set a a reveiver Manual Press 1 ALL to select Student 1 as transmitter and the instructor and all other students will receive his screen image Projector Activation of the projector The current transmitter is displayed onto the projector screen BLANK NOTEBOOK IMS500 HD ONLY PRO NOTEB IMS500 HD ONLY IMS500 HD Blank all screens All screens are blanked when BLANK and ALL are pressed The instructor remains the transmitter and his screen is active and can still be displayed onto the projector screen To blank single screen press BLANK and select student s key to blank the screens Notebook Notebook screen can be broad castet to a single student a group or all students as well as to projec tor Projector Notebook Sends notebook screen directly to projector independent of other settings e g INSTR to ALL Both settings are working simultane ously VIDEO OFF will NOT turn off the Projector Notebook function To turn it off hit the key again or replace it by the function PROJ INSTR
8. cribed below A Before installing operating or using the instru ments it is required to read this user manual In particular please observe all safety instructions Contact address Leica Microsystems Switzerland Ltd Industry Division Max Schmidheiny Strasse 201 CH 9435 Heerbrugg Switzerland IMS500 HD User Manual This user manual includes important instructions related to operating safety maintenance and accessories Your Leica IMS500 HD Systems comes with a H printed manual Keep it in a safe place and readily accessible to the user User manuals and updates are also available for you to download and print from our web site at www leica microsystems com Produced for Leica Microsystems from EBS Euchner B ro und Schulsysteme GmbH Ernst Leitz Strasse 3 DE 63150 Heusenstamm Manual Accessories from third party suppliers You can combine individual system articles with articles from external suppliers Please read the user manual and the safety requirements of the supplier Original condition To maintain the unit in its original condition and to ensure safe operation the user must follow the instructions and warnings contained in these user manuals Legal requirements Adhere to general and local regulations relating to accident prevention and environmental protection EC Declaration of Conformity Electrically operated accessories are constructed based on the state of the art of technology and are pr
9. ctric installation in the building must conform to the national standard e g current operated ground leakage protection fault current protection is suggested Care instructions General instructions Protect the Leica IMS500 HD against damp vapors acids alkalis and corrosive substances Do not store chemicals in the vicinity Protect the Leica IMS500 HD System from oil and grease Itis advisable to enter a service agreement with Leica Service Cleaning coated parts and plastic parts e Dust and dirt particles should be removed with a soft brush or lint free cotton cloth Remove coarse debris with a moistened disposable cloth e Clinging dirt can be removed using petroleum ether or alcohol e Acetone xylene or nitro containing thinners must NOT be used IMS500 HD Never use chemicals to clean colored surfaces or acces sories with rubberized parts This could damage the surfaces and specimens could be contaminated by abraded particles Manual Accessories maintenance and repair Accessories Only the following accessories may be used with the Leica IMS500 HD System e The Leica accessories described in this user manual Other accessories provided that these have been expressly approved by Leica as being technically safe in this context IMS500 HD Maintenance e The Leica IMS500 HD System is basically maintenance free To ensure that it always operates safely and reli ably we recommen
10. d that you take the precaution of contacting the responsible service organization H You can arrange for periodic inspections or if appropriate conclude a maintenance contract with them Itis advisable to enter a service agreement with Leica Service e For maintenance and repair only OEM spare parts may be used Manual Repairs and service work e Only original Leica Microsystems spare parts may be used e Before opening the instruments switch off the power and unplug the power cable e Avoid contact with powered electrical circuits which can lead to injury Service address In case of problems please contact us as follows Leica Microsystems Switzerland Ltd Industry Division Max Schmidheiny Strasse 201 CH 9435 Heerbrugg Switzerland Phone 41 71 726 33 28 Electrical data and ambient conditions Electrical data See specifications page Environment Temperature for use 10 C 40 C Storage temperature 20 C 52 C 50 F 104 F Manipulation shock 25 mm on 50 mm hard wood Transport shock unpacked 0 80g 6ms Transport shock packed 800 mm free fall Transport vibrations unpacked 5 200 Hz 1 5 g Atmospheric pressure in use and for storage 500 1060 mBar Humidity in use and for storage 20 90 Installation Category Il Overvoltage Category Pollution degree 2 IMS500 HD Manual Unpacking e Carefully remove the system and any components from t
11. ed chargers and cables can explode the battery Bluetooth Antenna the battery or damage the equipment The antenna will be connected according to the draw Only use the charger supplied with the Tablet or another If the battery is completely discharged you can not turn on ing with a serial 9 pin cable to the Instructor Box 5Volt USB Power Supply the device even if the battery is charging Connector Keyb IMS500 HD Manual 17 To start the Leica Microsystems control app select the icon Leica Microsystems on the home screen or through the application menu Tap Classroom 1 at the top of the screen Availabieroome lassroom 1 00 0A 4F 01 22 C5 rA Saving screenshot IMS500 HD Manual 18 Through the keypad shown on the screen every single function of the IMS system can be controlled A function can be selected by pressing a key or key combi nation The transmitter is marked with a green bar one or more receivers are marked with a red bar See the function of each button in the Quick Start guide on the previous pages IMS500 HD Manual The options will be shown by touching following button in the lower part of the screen Select Room About Layout Creator IMS500 HD Manual 20 Options Overview Includes IMS500 HD User Manual Layout Creator To create individual room layouts Close Closes the application Current selections will not be closed IMS500 HD Manual
12. he packing carton eCheck the components against the planned configura tion Optional items such as camera adapters cameras and carrying cases are not shipped as part of the standard equipment These items are delivered in separate packages Please do not discard any of the packing materials They should be used for safely storing and transport ing the instrument should the need arise Installation Please Note IMS500 HD e All HD displays must have DVI and HDMI connections and DVI cables some displays don t come with DVI cables included therefore be sure they are supplied with the display e Some manufacturers displays require that the camera resolution is changed to 720P e All HD displays must be of the same model IMS500 HD Manual 11 IMS500 HD Installation Basic System without Computers Leica HD Camera or PC Student Station IMS500 HD STUDENT Student HD display with DVI input from customer DVI cable from customer Student DVI module 35101720 DVI Central Unit cable 35101802 06 10 15 20 another Student module Central Unit 35101606 35101610 35101620 35101632 le Emp EE gt o Em EE Manual TEACHER Leica HD Camera or PC Teacher HD Teacher display with Station gt DVI input from I customer Large HD TT TT display or HD projector from customer l DVI cable from customer DVI Keypads Teacher DVI 35
13. in the user manual Additional information about other instruments from Leica Microsystems Ltd can be found online at www leica microsystems com The Safety concept booklet contains additional safety information regarding the service work requirements and the handling of microscope accessories and electrical accessories as well as general safety instructions IMS500 HD Symbols used in this operating manual Warning of a danger A This symbol indicates especially important infor mation that must be read and complied with Failure to comply can cause the following e Hazards to personnel e Functional disturbances or damaged instruments Warning of hazardous electrical voltage This symbol indicates especially important infor mation that is mandatory to read and observe Failure to comply can cause the following e Hazards to personnel e Functional disturbances or damaged instruments Danger due to hot surface A This symbol warns against touching accessible hot surfaces e g those of light bulbs Manual Important information H This symbol indicates additional information or explanations that intend to provide clarity Explanatory notes gt This symbol within the text points to additional infor mation and explanations Important Notes Description The Leica IMS500 HD Systems meets today s state of the art of technology Nevertheless hazards may still arise during operation The potential risks are des
14. ovided with an EC Declaration of Conformity Instructions on use Intended use The Leica IMS500 HD Interactive Microscopy System is for allowing the Teacher to select which microscope images will be shared with himself other students or a projector Position the Leica IMS500 HD System so that it can bedisconnectedfromthe powersupplyatanytime The power cord must remain accessible at all times because the power supply is foreseen as mains disconnecting device Place of use Only use the system in closed dust free rooms and between 10 C and 40 C Protect the devices from oil chemicals and extreme humidity Never use electri cal devices outdoors Install electrical devices at least 10 cm from the wall and away from flammable substances Avoid large temperature fluctuations direct sunlight and vibrations Non intended use A Using the system in any way contrary to the speci fications in the user manual can lead to bodily harm and damage to objects Doing so can impair the functions of the protective measures provided IMS500 HD Only use one of the following power cords Don t unscrew any mechanical components unless expressly instructed to do so in the instructions H The devices and accessories described in this operating manual have been tested for safety and potential hazards The responsible Leica affiliate must be consulted A whenever the instrument is altered modified or used in conjunction with non Leica
15. structures in routine and research industrial applications materials science quality control forensic science investigation and educational applications www leica microsystems com Leica Microsystems an international company with a strong network of worldwide customer services Active worldwide Tel Fax Australia North Ryde 61 288703500 29878 1055 Austria Vienna 43 1 486 80 500 1 486 80 50 30 Belgium Diegem 32 27909850 2 790 98 68 Brazil Sao Paulo 55 11 2764 2411 11 2764 2400 Canada Concord Ontario 1 8002480123 847 405 0164 Denmark Ballerup 45 44540101 44540111 France Nanterre Cedex 33 811000664 15605 23 23 Germany Wetzlar 49 6441 294000 64 41 29 41 55 India Mumbai 91 226 1880 200 226 1880 333 Italy Milan 39 02574861 02 574 03392 Japan Tokyo 81 354212800 3 5421 2896 Korea Seoul 82 251465 43 251465 48 Netherlands Rijswijk 31 70 4132 100 70 4132 109 People s Rep of China HongKong 852 25646699 2564 4163 Shanghai 86 2160396000 21 6387 6698 Portugal Lisbon 351 213889112 21 385 4668 Singapore 65 65505999 6564 5955 Spain Barcelona 34 934949530 93 494 95 32 Sweden Kista 46 86254545 8 625 45 10 Switzerland Heerbrugg 41 71 726 34 34 71 726 34 44 United Kingdom Milton Keynes 44 800 298 2344 1908 577640 USA Buffalo Grove IIlinois 1 8002480123 847 405 0164 08 2015 Copyright 2013 Leica Microsystems Schweiz AG Max Schmidhein
16. t this user manual is always available Carry out regular inspections to make certain that the authorized users are adhering to safety requirements When instructing new users do so thoroughly and explain the meanings of the warning signs and Messages Assign individual responsibilities for starting oper ating and servicing the instrument and monitor the observance of these responsibilities Do not use the Leica IMS500 HD system unless it is in perfect condition IMS500 HD Inform your Leica representative or Leica Microsystems Schweiz AG Industry Division 9435 Heerbrugg Switzerland immediately of any product defect that could potentially cause injury or harm If you use accessories made by third party manufac turers with the Leica IMS500 HD system be sure that each such manufacturer confirms that the combina tion is safe to use and observe the product s user manual Modifications and maintenance of the Leica IMS500 HD system may only be performed by professionals expressly authorized by Leica Only original Leica replacement parts may be used in servicing the product After service work or technical modifications the unit must be reconfigured with observance to our technical requirements Manual If the unit is modified or serviced by unauthorized persons is improperly maintained as long as main tenance was not carried out by us or is handled improperly Leica will not accept any liability The ele
17. y Strasse 201 Heerbrugg CH 9435 Switzerland Subject to change LEICA and the Leica Logo are registered trademarks of Leica Microsystems IR GmbH eca MICROSYSTEMS
Download Pdf Manuals
Related Search