Inverter With Charge User Manual
Contents
1. CNaOUM it Pure sine wave inverr D Check the output eliminate the short circuit condition and restart E Check the wire if too short replaces it F Open fail then restart 12 This product is guaranteed for one year from date of purchase If artificially damaged disassemble or modify the Company is not responsible for warranty Products within 7 days from date of purchase have any problem free exchange of new machines man made damage the casing or packaging is not in the exchange range This manual is only used to guide the use and cant represent their products exactly the same If any problem please consult our technical service department and it will be solved with the guidance of professional engineers CNaOUM it Pure sine wave inverr PRODUCT CERTIFICATION Inspection Factory inspector Date User stubs To protect your rights please fill in the following black carefully And safekeeping as after sales service credentials Product model Name Product serial NO Tel Date Email Add2. CNBO IH CNBO H Pure sine wave charger inverter Product Manual CNaOUM it Pure sine wave inverr The inverter installer must be professional for the high pressure in the inverter unprofessional person please do not open it The inverter should be installed at a dry well ventilated environment and keep it more than 20cm away from the wall to avoid clogging its inlet Do not expose the inverter to the heat moisture flammable explosive corrosive environment dry cloth cleaning avoiding water 1 Load power didn t exceed the inverter s rated power Red terminal is the inverter positive electrode the black terminal is negative electrode please connect the battery properly avoiding positive and negative reversed connecting The connecting wire please use the factory assigned standard wire avoiding too short of the wire 2 Switch in the OFF position before 1 CNaOUM it Pure sine wave inverr connecting the power the power supply use battery solar power system DC power supply connect the power to confirm if the input of the inverter nominal DC voltage is consistent with the power supply DC voltage avoiding excessive voltage input inverter 3 The inverter for off grid power AC output cannot be connected to other power supply Mains Before using the inverter shall be connected to the earth If do not use the inverter please turn off the switch avoiding excessive no load loss 4 Charger invert
3. er with bypass function When mains come mains supply directly to the load as well as charge for the battery When mains cut off automatically switches to inverter power switch time is less than 13 Ms 5 Please connect the AC power to the AC input terminal correctly Charging indicator D CNaOUM it Pure sine wave inverr light is red full is green 6 Please read above carefully if you have the unclear point please call our after sales service to consultation Not in accordance with the installation of this manual method of operation may cause personal injury or cause damage to machinery and equipment 7 Protection Features Low voltage protection when the battery in low voltage condition shut down output buzzer light work at the same time Over voltage protection when the battery voltage is higher than the range of the machine rated voltage the machine shut down output buzzer and light work Overload when the load power is greater than the machine rated power the machine shut down output buzzer and light work Thermal protection when the internal _3 NOU Pure sine wave inverr temperature is above about 75 C the machine shut down output buzzer and lights at the same time work Short circuit protection output short circuit the machine shut down output buzzer and lights at the same time work Anti anti connect protection when input positive and negative poles reversed the diode anti burn fuse t
4. o protect the inverter need to replace the fuse MOS FET anti connect inverter does not work can be work after reversed When the inverter internal temperature reach about 45 C the cooling fan start working force air cooling oo e o a 8 Instruction 1 Charging Indicator 2 Full Indicator 3 Mains Indicator 4 Fault Indicator 5 ON OFF Button 6 Working Indicator Q 7 Mains input terminal 8 Fuse location 9 Ground terminal 4 CNBO E Pure sine wave inverr 10 USB 11 AC output socket Instruction 1 Cooling Fans 2 Positive input 3 Cooling Fan 4 Negative output 9 Wiring diagram Power Inverter GND CNaOUM it Pure sine wave inverr 10 Use of the environment Ambient temperature 10 C 50 C Storage temperature 30 C 70 C Relative humidity 0 80 no condensation Elevation lt 1000m 11 Troubleshooting 1 Inverter did not respond check the connect condition reconnect the wire check the positive and negative pole to confirm connected correctly reconnect properly replace the fuse 2 Alarm red with no output A Check the voltage is higher or lower than the inverter s rated voltage range replace the battery or control the voltage in the range B Check the temperature if too high cooling the inverter and put it in a ventilated place C Check the load power if too high please remove part of the load power and restart the inverter
Download Pdf Manuals
Related Search