DataMaster™ Quick Start Guide
Contents
1. menu select Backlight amp Sound The Backlight level can be modified by sliding the control tab to the desired setting Sound can be chosen as Sound On default setting or Sound Off 4 Set Graph Scales This optional setting lets you view measurements in graphical display on the Data Master From the Settings menu select Graph Scales From the Graph Scales screen you can set the Minimum and Maximum RH and Temp values for scaling purposes A Target RH can also be set as a reference Quick Start Guide Taking Readings Measurements Note An SD memory card MUST be installed in order for the DataMaster to take a reading with the Bluetooth Reader If using a lockable SD card the card must be unlocked to receive the reading 1 Add a Job From the Tools menu select Add Job Job names must be a maximum of 8 alpha numeric characters Once job name is entered select OK to add to job list Multiple job names can be added at any time The job list can be reviewed at any time by select ing View from the main menu 2 Begin Taking Readings Go to an already installed Smart Sensor Firmly insert the Bluetooth Reader into the Smart Sensor holding it in place for approximately 3 seconds then remove After no more than 5 seconds the READING ACQUIRED display should appear on the DataMaster if not reinsert the Reader The screen will dismiss itself after ap2. yee WAGNER DATAMASTE R QUICK START GUIDE emp 78 01 lob T0 Serial 64 Sample sors Date 11 28 27 lime DP 54 0 www F2170Reports com de po oe a rw aaa tax re n im rag j RAPID 2 L Accurate Wiolature lest for loncrete Floors Quick Start Guide Package Contents 1 DataMaster handheld unit 1 Bluetooth Reader 1 USB power cable 1 SD memory card installed DataMaster Quick Start Guide DataMaster manual Initial Battery Charge Your DataMaster unit will require an initial charge to have a fully operable battery capacity To charge the DataMas ter connect the included USB power cable to the micro port at the base of the unit and then to a computer USB port or AC USB adaptor not included for use of a conventional outlet Allow 2 3 hours for the initial charge 4 SetDate and Time Power on the DataMaster and from the Main Menu choose Settings Select Date Time and set month day year hour minute and sec ond by touching the appropriate box and using the up or down arrows at the bottom of the screen to select the correct number Select OK or the return arrow to return to the Settings menu 2 Set Units From the Settings menu select Units Select Fahrenheit or Celsius according to require ments as well as Inches or Millimeters 3 Set Backlight and Sound From the Settings
3. proximately 3 seconds If this is the very first reading for this sensor you will be taken to the Select a Job screen where you will assign this sensor to the appropriate job from the job list The first reading at a new site may take 3 to 7 seconds to initiaite the first connection Once connected indicated by the BlueTooth icon in the title bar all subsequent readings should take only 1 to 2 seconds Readings from that sensor will be recorded in the assigned job file Sensors are non transferrable between jobs once assigned 3 Enter Sensor Information When the DataMaster ac quires each initial sensor reading touch the Informa tion button i in a circle on the bottom right corner of the screen On the Sensor Info screen enter the sensor location Loc and the Hole Depth which are mandatory for correct reporting according to the ASTM F2170 reporting protocol Floor Slab and Slab thickness are optional but may be used to provide additional in formation if desired Once a sensor has been assigned to a specific Job subsequent readings from that sen sor will automatically be stored under that Job Job site data can be viewed on the Graph menu of the Data Master or by selecting individual sensors from the job listing Each reading will record the current slab internal RH and Temperature sensor serial number sample i e 2 of 3 date time dew point DP and ambient RH and temperature Q
4. uick Start Guide Taking Readings Continued 4 Job site data can be viewed on the Graph menu of the DataMaster or by selecting individual sensors from the job listing Each reading will record the current slab internal RH and Temperature sensor serial num ber sample i e 2 of 3 date time dew point DP and ambient RH and temperature For more complete information on viewing and using your Rapid RH DataMaster consult your user manual or contact us at www rapidrh com DataMaster Layout Front Back A Touch screen D SD card slot on side B USB port on bottom E Ambient RH Temp sensor C On Wake Up button on top F Hard reset hole
Download Pdf Manuals
Related Search