Home

Warning! - Rear View Safety

1. When GPS Data reception is working properly Blue LED will be lit continuously If the Play Key is pressed during either Normal Record Mode or Event Record Mode for more than 3 seconds GPS Cold Start will be operated with Blue LED blinking rapidly at 0 1 second for one second If GPS Data reception is running correct set the time of internal RTC Real Time Clock on GPS time Once set on GPS time it will maintain the exact time without any additional time set The internal RTC time is reflected with connecting the power again after power disconnection If there is any substance which can give the bad effect to GPS reception please leave it in the distance from RVS 300 O2 Installation Guide amp Function Descriptions O Acceleration Calibration Function ile If GPS data is not received properly Blue LED will blink at one second intervals When GPS Data reception is working properly Blue LED will be lit continuously If the Play Key is pressed during either Normal Record Mode or Event Record Mode for more than 3 seconds GPS Cold Start will be operated with Blue LED blinking rapidly at 0 1 second intervals for one second If GPS Data reception is running correct set the time of internal RTC Real Time Clock on GPS time Once set on GPS time it will maintain the exact time without any additional time set The internal RTC time is reflected with connecting the power again after power disconnection If
2. warrants that product from its authorized distributor will meet the applicable product specifications and be free from all defects in material and workmanship for an applicable period herein Limited War ranty This Limited Warranty is subjected to the following terms and conditions 1 This Limited Warranty is given only to the original purchaser of the Product Customer it shall neither exclude nor limit a any statutory rights of the Customer or b any of the Customer s rights against the sellers of the Product 2 The Limited Warranty shall be restricted to the country region of Product purchase this is to avoid excessive import or exportation of the Product throughout the supported countries 3 This Limited Warranty is only valid and enforceable in countries where the Product is sold Outside of the country of purchase any repairs performed by RVS s Authorized Service Centre are subject to charge to the purchaser at normal repair rates 4 The Limited Warranty entitles the Customer to a Product replacement or a full refund of the purchase price for any defects relating to the performance and or functioning of the Product which result from normal use of the Product provided that such a defect arises within ten 10 days of the original date of purchase of the Product and cannot be otherwise repaired RVS will provide a replacement or repair of the Product at RVS s own expense for any such defect arising after ten 10 days but
3. and save it on the name of evt_yyyymmdd_hhmmss_1 mp4 in this folder when the event occurs evt_yyyymmdd_hhmmss_2 mp4 for 2channel EventMovie Acc Folder G Sensor Log on the Event Record Mode is saved on the name of acc_yyyymmdd_hhmmss txt in this folder EventMovie Gps Folder GPS Log on the Event Record Mode is saved on the name of gps_yyyymmdd_hhmmss txt in this folder 3 NormalMovie_yyyymmdd Folder On the Normal Record Mode RVS 300 records video and audio and saves it on the name of drf_yyyymmdd_hhmmss_1 mp4 in this folder drf_yyyymmdd_hhmmss_2 mp4 for 2channel When the saved file number in the folder is reaching to 100th another new folder is created and the file from the 101st is saved into the new folder NormalMovie_yyyymmdd Acc Folder G Sensor Log on the Normal Record Mode is saved on the name of acc_yyyymmdd_hhmmss txt in this folder NormalMovie_yyyymmdd Gps Folder GPS Log on the Normal Record Mode is saved on the name of gpos_yyyymmdd_hhmmss txt in this folder 4 Setup Folder Environment Variables and G Sensor Calibration Data files are saved into this folder 5 Temp Folder This is a folder to save the temporary files for GPRS functions Others LIMITED WARRANTY STATEMENT This Limited Warranty shall apply to the Rear View Saftey Product including all accessories as contained within the original RVS gift box the Product Rear View Safety Co LTD RVS
4. image pops up 5 Press Next button when the below image pops up O3Playback O Codec Installation Ores Next button when the below image pops up tl Map sessi H ga Pad E Lia Cee Pe ie pa pops Up Biren the installation is completed the below image pops up Then press Finish button to finish the process O3Playback O How to use Viewer Program Double click Viewer Program icon Viewer Program Main Screen ai doi ERE SS cien N rrr Playback Display Slide Bar shows a play back progress and users can start play back a file on a specific part with moving it G Sensor Graph lt shows G Sensor data with graphs Menu Button Speedometer and Compass Google Map Users can track the driving route with GPS location data saved with the video file through this map Playback list Indicates the video file route currently played Additional Information Display It shows additional GPS and G Sensor information Menu Button and Control Button and Control Function eid Volume Control T Stop mn Previous gt Play Pause pro Next E Full Screen i Playback Speed Control Report Print Out al Configuration Set Program Information Google Map Control Control Function O3Playback Description It controls the play volume Stop playing and back to the start of the playing file Play the previous file when selects the plural fil
5. pan Close Window O3Playback Playback Movie File Playback a single file 1 Select a target root folder in SD or PC with clicking Open Folder L on Playback List screen E tee Local Desk 101 A e Losi DEI LATHA ir EN 2 Root Folder Select H Ey Adina Curent o cee E Paces Bin frati ir 2 Select a target file to play on the file list and double click After selecting a file on the list Playback button D can be pressed to play 1 File Select Continuous Playback with plural files 1 Select a target root folder in SD or PC with clicking Open Folder WL on Playback List screen 2 Select a target file to play first and click 3 Select the target files to play and click with pressing CTRL key at the same time To release the selection click again with pressing CTRL at the same time If clicks the first file and clicks the last file to view with pressing SHIFT Key at the same time all the files from the first to the last to view would be selected successively To select all files press CTRL A key 4 Click Playback Button ES and start the continuous play In order to playback the movie files through the viewer Program either connect SD Card to PC or copy all the folders and files stored in SD Card into PC O3Playback O Configuration Set Click Configuration Set button EA and the below configuration image will pop up setting EA DVA GPRS G sensor Trigger Level Audi
6. 00 times as a file and from the file recorded first it would be overwrit ten sequentially when the number of file is exceeding the maximum 4 When the power is disconnected on Event Record Mode RVS 300 while recording an event it will shutdown after saving the event maximum 20 seconds Otherwise it will shutdown instantly 5 the Stop Key is pressed RVS 300 RVS 300G will complete recording the event and all functions will be stopped All LED lights will be off To start RVS 300 again disconnect power and reconnect O2 Installation Guide amp Function Descriptions O Normal Record Mode Full Time Recording 1 Green LED is blinking at a second interval on Normal Record Mode 2 Normal Record Mode records video and audio at 5 minute interval successively 3 If SD Card storage is full during Normal Mode RVS 300 RVS 300G will over write starting from the file saved first 4 During Normal Mode G Sensor Acceleration Sensor and Emergency Key function will be ignored 5 If power is disconnected during Normal Mode RVS 300 RVS 300G will be shutdown after 10 second additional recording If the STOP Key is pressed during Normal Record Mode RVS 300 RVS 300G will complete recording and all functions will be stopped All LED light will be off To restart RVS 300 disconnect power and reconnect O Reset 1 If GPS data is not received properly Blue LED will blink at one second intervals
7. E 10 Package Ho 11 Part Descriptions CO 12 LED Signal Descriptions n ee 13 Coulens beloresnsialalleN e eee 16 Installation Guide Mounting gori ico son e i i T 7 Checkups after installation eee 167 Installation of an external camera Option 7 18 Function Descriptions Start IRA ORA E IN enna Meare 1 9 Event Record Mode e e n eg cee ee Ce 19 Normal Record Mode Full Time Recording 20 Reset O e E E A N A A E e E 20 GPS Functions nei ni ia 23 Acceleration Sensor G Sensor Calibration DAI G Sensor Data Analysis Example etnea DD GPRS FUNCHONS cece ec eee 23 GPRS Configuration SOM 24 03 Playback Firmware Update COSO NO I PR Me INA Ore nee Ce SD Card Data 0000060009000 9900 0000000900000000 000000000000000 0090000 0000000000009009 0I C0000000 I00070 00000000 04 Update OS Others Specifications Package Contents Part Descriptions LED Signal Descriptions O1 Product Introduction O RVS 300 is a Driver Recording System which applies GPS Global Positioning System GPRS GSM Option and 3D acceleration gravity sensor G Sensor Before using this product please be sure to read this manual X Actual product specifications may differ from what is indicated in this manual as product enhancements are implemented without prior notice X Printed at the time of production this manual may contain technical or editorial mistakes or omission O Precautions for Safety A War
8. FI LE Vl EW E R a the target file to Playback the file recorded on Event Mode TL setect EVENT FILE VIWER Atta EVENT File 03 Playback Playback through PC O Rear View Safety RVS 300 Viewer Program installation Webhome be the Roads af Saiu Mirar I Insert CD provided into PC and click Next when the below setup Wizard start image pops up Tia dii radiata sie pa ea Er mune Som pr ni ae de ee Cii Hm ee oo E ed ra 2 Select the folder to install the program as below image and click Next PERE REI E y Select Start Menu folder and press Next een sae ibi n button 4 Press Next button when the below image pops up 5 Press Install button to install the program when the below image pops up 6 When the installation is completed the below image pops up Then press Finish button to finish the process 03 Playback Codec Installation To play back the files recorded through RVS 300 Viewer program K Lite codec provided with a bundle CD must be installed K Lite Codec Pach 4 7 5 Basie 1 Double click Klcode475b exe file on CD and DOO pis pepati fi ua ri it zena te start the installation ais sa eii Press Next button when the below image No ie el a ri O ki E rl fll i Pd Ape pl ee A IE ee A om roban y ETA LPEE e a a 13 Press Next button when the below image pops up 4 Press Next button when the below
9. Thanks for purchasing RVS 300 RVS 300G Black Box a driver recording system Please be sure to read this manual in details before use We do not provide a warranty for the compatibility of some accessories which are not provided by us We are also not responsible for any defect caused by such accessories After getting the warranty card please check the purchasing data Date Shop Info on it Rear View Safety Viewer Program which is provided is designed to be run on Window 2000 XP Vista it s product statement and caution or attention is below a user manual or instruction manual because Type label is too small No room for this writing and required text is already included in the user guide aStatement 1 This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received Including interference that may cause undesired operation aStatement 2 This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates users and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to ra
10. d Product shall continue to be warranted for the remaining term of the Limited Warranty period or for three 3 months from the date of repair or replacement whichever is longer 10 Before returning any units for service the Customer is solely responsible for backing up data and removing any confidential proprietary or personal information trom the Product RVS is not responsible for damage to or loss of any programs data or removal storage media 11 This Warranty does NOT cover recovery from any software updates installation and removal of the application software or any loss of data storage 12 RVS reserves the right to add delete or amend the terms and conditions of this Limited Liability and any such change will be made available to the purchasers of the Product either on Rear View Safety s web site http www rearviewsafety com or by other means 05 Others 13 THIS LIMITED WARRANTY SHALL NOT APPLY IF THE DEFECT WAS CAUSED THROUGH ANY OF THE FOLLOWING a The Product serial number the accessory date code has been removed erased defaced altered or is illegible or b The defect is resulting from the use of the product in a manner other than their normal and customary manner e g in excess of their minimum specification or operating instructions or malfunction or failure resulting from use of incalibrate voltages or c Deterioration of the Product due to normal wear and tear All plastic surfaces and other natural wear o
11. dio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the userwill be required to correct the interference at his own expense aWarning THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFI CATIONS TO THIS EQUIPMENT SUCH MODIFICATIONS COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIP MENT oCaution Danger of explosion if battery is incorrectly replaced replace only with the same or equivalent type alnformation This device and its antenna s must not be co located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi transmitter product procedures And also used for this transmitter must not be co located or operating in conjunction with any other antenna or transmitter Hereby the manufacturers declare that this VIDEO CAR BLACKBOX is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A Warning Road Eye is a device to assist a safety driver We are neither responsible nor compensate for any defect and damage caused by user s misuse and carelessness 01 Product Introduction y O Sy ZA 4 E NA a YY A y y y gt A gt 4 SES _ lt A gt Installation Guide amp Function Descriptions Producida 8 Precautions for Safety i 8 Cauliens amp simbieetl na 9 SpeceiticationS gt
12. eck if the data is recorded correctly and revise the camera place on it X JS 300 JS 300G is working based on High Sensitivity Camera Sensor The recorded video image can be shown dark if the device is installed toward the sky Checkups after installation Li the camera angle is not proper adjust with rotating the lock screw and fix it after xK Refer to the steps 2 5 O2 Installation Guide amp Function Descriptions O External Camera Installation Option I Select a place to install Select a place to install the external camera and fix with the screw provided The connecting part should be toward to the ground 2 Connect the camera to RVS 300 RVS 300G Connect the camera to RVS 300 with the cable provided POWER BI A V Mode Selection Switch must be on CAMA to use an external camera I Fix the camera angle After adjusting camera angle fix the camera with the lock screws on the bracket Disconnect the power during installation of the camera External Camera is only for internal use O2 Installation Guide amp Function Descriptions O Start 1 Insert SD Card into RVS 300 RVS 300G then power on Red Yellow and Blue LED will light sequentially at a second interval About 3 seconds after lighting RVS 300 RVS 300G will start running A If it powers on without SD Card Red and Green LED will be blinking alternately at 0 5 sec interval In this case disconnect the power and c
13. eration Deceleration time time Right Turn Left Turn time time Head On Collision Back Up Collision O2 Installation Guide amp Function Descriptions O GPRS Functions GPRS Function is only for RVS 300G GPRS Specification Quad band EGSM 850 900 1800 1900 MHz Output power Class 4 2W 850 900 MHz Class 1 1W 1800 1900 MHz Sensitivity 107 dBm typ 850 900 MHz 106 dBm typ 1800 1900 MHz GPRS class 10 3 time slots in RX 43200 bps max and 2 time slot in TX 28800 bps max 4 time slots in RX 57600 bps max and 1 time slot in TX 14400 bps max GPRS Functions Yellow LED blinks under GPRS disconnection and it is lighting continuously when GPRS is connected and available to data Tx Rx When GPRS Data is transmitted or received Yellow LED blinks at 0 1 second intervals RVS 300 provides to transmit the below data such as G Sensor value GPS data through SMS to the designated number Date 2009 02 01 04 19 30 G Sensor X 0 02 Y 0 93 Z 0 03 Latitude 37 237981 N Longitude 126 508762 E Speed 51 km h RVS 300 provides Data Transmission function through FTP and Snap shot files on JPEG format can be transmitted to the designated FTP Server 02 Installation Guide amp Function Descriptions O GPRS Configuration Set Click Configuration Setting button on RVS 300 Viewer Program Then click GPRS Tap and the below GPRS Configuration setting image wil
14. ernal MIC DC 12V 24V From Car Adaptor Upon Impact Automatic Manual Support Support Support 119 5 x 55 0 75 5 x 31 7 mm 137 W O GPRS 157 With GPRS RVS 300 No GPRS RVS 300G GPRS included Ol Product Introduction O Package Contents Please check the contents after opening the gift box Refer to the below images RVS 300 Or RVS 300G Cigar Jack Power Cable AN Cable For TV Connection 2 Viewer Program CD SD Memory Card Cable Tie Holder GPRS Ant Only for JS 300G External Camera amp Cable Option Actual product specifications may differ from the images in this manual as product enhancements are implemented without prior notice O1 Product Introduction PART DESCRIPTION Front Camera Emergency Button SD Card Slot Mode Selection Switch 1 A V TV Out 2 CAM A External Camera Function Key Reset Key Mike Main Power Jack Power W TV Out Jack A V Mode External Camera Video In Jack External Camera Mode External Camera Jack Power A RED Event Mode GREEN Normal Mode YELLOW GPRS Only for RVS 300G BLUE GPS Lock Screw Double Faced Foam Tape For attaching to window GPRS Antenna Jack Only for RVS 300G SIM Card Slot Only for RVS 300G O Product Introduction LED Signal Descriptions Classification Power connecting With SD Card Power Connecting Without SD Ca
15. es and views in series Press this key to pause during playing Press once again to back to play Play the next file when selects the plural files and views in series Playback on Full size screen To be back to the standard screen size double click Full size screen or press ESC It controls the speed of playing either slower or faster Making a reporting file with Snap shot image G Sensor Graph and Map etc Setting Operating configuration Shows the current Program Version Information Map Tracking Map Zoom In Out Satellite Map view is providing smaller scale than Normal Map View ea ee Select Normal Map View Satellite Map View Overlay Map View 03 Playback Play List Button and Control Button and Control Function Description Ea Open Folder Selects the folder to play E Delet Deletes the selected file and G Sensor viens GPS Log file which were saved together File recorded on Selects and lists the files recorded on Normal Mode Normal Mode Event Mode henl Hovis NA File recorded on Inthe case of the file recorded by 2channel it would deletes the Event Mode file recorded by 1channel together EE Camera Channel Selects and lists the selected camera file when EEE Select filter playbacks the file recorded by 2channel Other Buttons Button and Control Function Description mn ee It opens or closes the additional information screen which eee Maier shows the additional GPS and G Sensor information Minimize
16. f externally exposed parts of the product are scratched or damaged under normal usage or d The defect is arising from improper installation unauthorized repair alteration or modification to the Product by third parties or e The defect is arising from operating with components or accessories ancillary or peripheral equipment not officially authorized or provided by RVS or used in other than its intended use or g The defect or damage are arising from unauthorized modification or h The defect or damage is arising from misuse mishandling accidental lost abuse accident negligence and damage caused directly or indirectly by Customer including but not limited to improper testing installation alteration or modification of any kind or spillage of food or liquid or build up of dirt or dust or mains supply problem thunderstorm activities or infestation by insects or vermin or exposure to abnor mally corrosive conditions or operation with extreme heat or humidity or 14 WHERE A DEFECT WAS UNDETECTABLE BY THEN AVAILABLE TECHNOLOGY OR WAS THE RESULT OF COMPLYING WITH THE APPLICABLE REGULATORY STANDARDS OR WHERE THE DEFECT WAS THE RESULT OF THE CHANGE IN THE DESIGN OF THE PRODUCT COMPONENTS SUPPLIED BY A THIRD PARTY RVS WILL NOT BE LIABLE FOR ANY LOSSES OR DAMAGES OF ANY NATURE INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS OF THE CUSTOMER 15 This Limited Warranty does not affect the Customer s statutory rights in law s
17. ges 2 Play back the video file saved into SD Card with connecting TV directly Please refer to File Viewer Mode If the power is connected without pressing any key after connecting the A V Cable to TV RVS 300 RVS 300G will start on Forward Shooting Video Output Mode And if the power is connected while pressing the Play key it will start on File Viewer Mode TV Out Signal Format NTSC PAL PAL M setting should be done through the configuration set on the viewer program O3Playback O File Viewer Mode Connect the power under the status of pressing PLAY Key and File Viewer Mode which can replay the saved files through TV Out is started Green LED is blinking on operating 1 Press PLAY Key until Red LED is on after power connection 2 Mode Selection Slide Switch must be on A V CAMB O Function of each key In the case there are files recorded by CAM 1 and 2 which are mixed up together on Event File Viewer the file recorded by CAM 1 is played first and the file recorded by CAM 2 is played after automatically Item PLAY Menu Select Playback the selected file Replay Pause STOR Move to top menu Stop Playing Move to the file list UP Move up Replay 10 second forward DOWN Move down Replay 10 second backward 1 Channel Front Camera 2 Channel External Camera O 3Playback Playback the file recorded on Normaliruti time Mode Faso NORMAL FILE VIWER Zia Normal File Folder N C R M A L
18. ion G Sensor Data analysis Example GPRS Function Only for JS 300G GPRS Configuration Only for JS 300G O2 Installation Guide amp Function Descriptions O PRECAUTIONS A Turn off the engine before installation X Connect the main power of the device at last after installation POWER E here in after called Power X Insert SD Memory card before connecting the device X Install the device in safe and bright place X Connect the main power through cigar jack provided DC 12V 24V O2 Installation Guide amp Function Descriptions Installation 7 Attach the device 2 Fix the device Get the camera lens focused on the front and fix with Lock Screws of the device X GPS reception part should be exposed to the window for the better reception 3 Connect the power Connect the cigar jack to the power port and check if the power is working properly SD Card should be inserted before connecting the power Otherwise Red and Green LED would be blinking at 0 5sec interval by turns 4 Calibrate G Sensor Acceleration Sensor Press Down for 3 seconds when power is on and calibrate G Sensor value Check if Red LED is blinking at 0 1sec interval rapidly for a second X When calibrates G Sensor put the device on flat place When changes the place to attach the device calibrating should be done once again 5 Working Test Play back the saved data after testing drive Then ch
19. ke may damage the device This product is designed to automatically record a video file triggered by a user defined level impact to your car The manufacturer does not guarantee about every impacts on your car to trigger this function Prevent any foreign substance to come in contact with the memory card or the internal parts of this device as it might cause malfunctions Keep the lens clean and avoid any obstacles in the camera angle to get the clear view Do not put other substances around the device It can be mirrored through the windows and recorded with accident images In the accident getting less impact than the minimum user defined the image may not be recorded Refer to the manual Rights of all the software and hardware related to this product belong to Jcommunications Co LTD Unauthorized reproduction processing and distributing can be punished by intellectual property rights management law as well as claimed compensation for damages Product Introduction Specification Front Camera External Camera Recording Resolution Shock GPS Shock Sensor Storage Audio Power File Saving Normal Recording Real Time Clock TV Out Size Weight 9 GPRS 120 1 3 CMOS 300K Pixel Digital Sensor WDR Support Option 90 14 CCD 270K Pixel NTSC H 264 VGA 640 480 up to 30fps 2ch use VGA 640x480 up to 15fps Internal GPS Internal 3D G Sensor SD Memory Card 1GB 16GB Int
20. l pop up Setting DYA We phone number Ear IP Address 192 168 0 1 ONPE EN Proxy port 8000 Aon apn_name i E IP Address 192 168 002 User ID username Pon moo User ID username Password rarae shh she E d keere C send off JO min DE f At event C 30 min send via C 5min 1 Hour M SMS p FIP GPRS Bearer 1 IP Address Proxy Server IP Address Proxy Server can be skipped when it is not used 2 APN Access Point Name 3 Proxy port HT TP Proxy port TCP 4 User ID Authentication User ID 5 Password Authentication Password O SMS phone number Type a phone number which SMS is sent to FTP 1 IP Address FTP Server IP Address 2 User ID Authentication User ID 3 Password Authentication Password 4 Port FTP port Send period Set the interval to send Send via Set the protocol which SMS is sent via 03 Playback Playback through TV O Cable connection for TV Out 1 Please connect A V Cable to the jack on RVS 300 RVS 300G 2 Connect Yellow color A V Output cable to Composite Video Output Terminal on TV and connect Red Right and White Left color A V cables each to Composite Audio Output Terminal on TV 3 Select A V CAMP Mode Selection Switch on A V 4 Connect a Power Adapter to POWER I Adapter is an optional item which may be purchased separately Usage of TV Out TV Out is used for the below two usages 1 Real Time monitoring of forward shot ima
21. ning To prevent causing damage to the user s property and to ensure the user s safety please read carefully the following precautions While driving never perform any operation and always park the car in a safe place first before operating the device Do not disassemble repair or reconstruct without an authorized technician Use the device under proper temperature Leaving the device for a long time under hot or cold temperature can be a cause of malfunction Proper Temperature O 60 Avoid exposing this product to shock or impact and keep it away from magnetic fields or vibration Keep the product away from wet places In using vehicle power do not use for a long time with the engine off It may be a cause of discharge This product is designed to be used with Cigar Jack Power In case of using direct electric power B Power of car please discuss with a specialist and any problem occurred in this case will belong to users responsibility O1 Product Introduction Performing while driving can be a cause of accident Always park the car in a safe place first before operating the device Check the installation status before driving Driving under the ohysical conditions such as uneven a sharp curve in the road with unstable installation might cause damage In using vehicle power please first check if there is no problem with the power supply before connecting the device to the cigar jack adaptor Any sudden power spi
22. o Recording Unit of Speed Time Zone Setting GMT 0 00 He G Sensor Trigger Level Move the slide bar and select the value between 0 10 0 99 Default Value 0 50 0 30 Sensitive 0 50 Normal 0 70 Dull Audio Recording select Voice Recording availability ON or OFF Default ON Unit of Speed Select a unit of speed Default km h TV Out Select TV Output format Default NTSC Time Zone Setting Set the time zone of user Default Korea GMT 09 00 OA Update O Firmware Update RVS 300 is firmware upgradeable through SD Card 1 Copy the target file to update app bin into a root folder of SD Card 2 Insert SD Card into RVS 300 RVS 300G and connect the power 3 When Red Yellow and Blue LED are sequentially lit at a one second interval and JS 300 JS 300G is started Update is progressed with Green LED blinking rapidly at 0 1 second intervals 4 When Update is completed Green Yellow and Blue LED are all lit at the same time 5 Disconnect the power and reconnect RVS 300 is now working based on the new firmware O4 Update SD Card Data 1 Event Folder On the Event Record Mode RVS 300 RVS 300G is recording the time file name G Sensor Data and GPS Data and save it on the name of evt_yyyymmdd_hhmmss txt when the event occurs 2 EventMovie Folder On the Event Record Mode RVS 300 RVS 300G is records for the maximum 30 seconds of video and audio
23. onnect power again after inserting SD Card 2 Recording is run based on Event and Normal record mode Full Time Mode and the present recording mode is saved and memorized into Configuration Variable Setting File in SD Card The Factory default record mode is Event Mode and it would be same after formatting SD Card 2 To change the recording mode connect power under the status of pressing Emergency key simultaneously The mode will be changed either Event Record mode to Normal Record Mode or Normal Record Mode to Event Record Mode The changed recording Mode would be saved into SD Card and maintained until the mode is changed by user When pressing the Emergency Key press until Red LED turns on Event Record Mode During Event Record Mode Red LED is blinking at one second second intervals 2 When the impact value recognized by G Sensor acceleration sensor is bigger than user defined value or when user presses Emergency key manually the image and voice before 10 seconds and after 20 seconds of the event will be saved as a file When an event occurs Red LED will be blinking rapidly at 0 1 second intervals for 3 seconds and inform of it 3 If another event occurs while the previous event is being saved the second event will be ignored If emergency record is required just press Emergency button and recording will be started After recording the mode will be back to Event Record Mode Event can be recorded up to 1
24. pecific to the country of purchase and such rights remain protected Some countries do not allow the exclusion or limitation of incidental or consequential loss or damage or limitation of the implied warranties in which case the preceding limitation of exclusions may not apply to such Customers Please note Warranty service availabil ity and response times may vary from country to country and may also be subject to registration require ment in the country of purchase If you require assistance regarding warranty conditions or have any other inquiries please contact the RVS Customer Care Center or via the official website www rearviewsafety com Product Warranty Period RVS 300 RVS 300G 1 year from purchase Car Black Box System Technical Support If you have any questions or suggest please contact the following addresses Contact our support team from 9 30 AM to 5 00 PM EST Monday through Friday TEL 800 764 1028 FAX 646 755 3705 Website www rearviewsafety com E mail info rearviewsafety com
25. rd Stand by Event Recording When Event occurs Or when press Emergency Key On Normal Full Time Recording When GPS signal is available When GPS signal is not available When calibrates G Sensor Firmware Upgrade When Power is connected Firmware Upgrade On progress Firmware Upgrade Completed File Viewer When connected File Viewer When runs When searches GPRS Network When GPRS Network is connected When transmits GPRS Data system Error RED Event O O O O GREEN YELLOW BLUE Full Time GPRS GPS O ES O Status Blinking at 1 sec interval one after another Blinking at 0 5 sec interval by turns Blinking at 1 Sec interval Blinking at 0 1 Sec interval for 3 seconds Blinking at 1 Sec interval Light on continuously Blinking at 1 Sec interval Blinking at 0 1 Sec interval for a second Light on at 1 sec interval rapidly by turns Blinking at 0 1sec rapidly Light on at the same time Light off after lighting Light on continuously Blinking at 1 Sec interval Light on continuously Blinking at 0 1 Sec interval Light on continuously with Orange color rest Pi d i g i UA LY Y i TT Function N me n a Gt y n a a gt ore External Camera Installation Of Function Description Start Event Record Mode Normal Record Mode Full Time Recording Reset GPs Function Acceleration Sensor Calibrat
26. there is any substance which can give interfere with the GPS reception please leave it at a distance from RVS 300 O Acceleration Calibration Function 1 G Sensor Acceleration Sensor shows the Acceleration Value of X Y and Z axis on the unit of acceleration of gravity 1g 9 8m s2 And the directions are as below image X Axis Right amp Left Right Y Axis Front amp Rear Front Z Axis Top amp Bottom Top If a vehicle is parked on a flat plane G Sensor data should have a value of X 0g Y 0g and Z 19 However it would be changed by the place RVS 300 RVS 300G is placed and mounted Thus G Sensor should be calibrated to get more exact data If the Down Key is pressed during either Normal Record Mode or Event Record Mode for more than 3 seconds Calibration will be operated with Red LED blinking rapidly at 0 1 second intervals for one second After the calibration G Sensor Data will show a value of X 0g Y 0g and Z 19 regardless of the mounting place G Sensor Calibration must be done on a flat plane after parking O2 Installation Guide amp Function Descriptions G Sensor Data Analysis Example Viewer Program shows G Sensor Data Graph as the below images upon Log Data which is saved with video files and driving status can be analyzed through the graph e o o o o 0 o o o e e e e 0 0 e e e e 0 0 0 0 0 000 Z Y e 0 0 0 0 0 0 0 eo X time Stop time time Accel
27. within one 1 month of the original date of purchase This Limited Warranty may not be sold on assigned transferred or given to any subsequent purchaser or acquirer of the Product 5 This Limited Warranty shall last for twelve 12 months from the date of original purchase Warranty Period Avalid original invoice Proof of Purchase is required 6 This Limited Warranty covers expenses for inspecting and repairing the Product during the term of the Limited Warranty Customer shall deliver the defective Product to the RVS designated prem ises together with the warranty certificate proof of purchase and proof of identity of the Customer however any defective Product shipped by the Customer missing any one of such documentation may render this Limited Warranty invalid Where the defect was the result of the Customer s own mishandling of the Product force majeure or the result of a repair by an unauthorized service provider the Customer shall bear all expenses relating to shipping such a defective Product 7 RVS will return the repaired Product or another Product to the drop zone for collection by the Customer in good working condition All replaced faulty Products or components thereof will become the property of RVS 8 This Limited Warranty applies only to the original hardware components of the Product and does not apply to any software or other equipment 9 If RVS repairs or replaces the Product the repaired or replace

Warning! - Rear View Safety

Contents

Download Pdf Manuals

Related Search

Related Contents