Operation Manual
Contents
1. AIS Elite 4m HDI Target symbols The unit uses the AIS target symbols shown below Symbol Description JS Stationary AIS target P p P 7 Moving AIS target with COG course extension line The extension line always represents the target s course over ground and is set to 10 minutes by default When no signals have been received within a time limit a target will be defined as lost Lost AIS target The target symbol represents the last valid position of the target before the reception of data was lost AIS Elite 4m HDI NOTE If you receive heading data from an AIS vessel the orientation of the vessel DA icon represents its heading If heading data is not received the orientation of the vessel icon represents its course over ground COG Filtering the targets All targets by default are shown on the display if an AIS device is connected to your unit You can hide all targets or filter the target icons based on distance and vessel speed AIS vessels gt SS an na Si Hide all Hide further than 2 mi x Hide slower than 4mph v 26 Viewing AIS target information When you place the cursor on an AIS icon the MMSI number or vessel name if available will be displayed You can view detailed information about a target by selecting the target and pressing ENTER The AlS Vessel detail dialog will appear AIS Vessel Details SOG Received 02. or resell any Data base and you may NOT create derivative works based upon any Database or its contents Any unauthorized reproduction use or transfer of a Database may be a crime and may subject you to damages and attorney fees 4 This License Agreement will terminate immediately without prior notice from us if you fail to comply with or violate any of the provisions of this Agreement Upon termination you will promptly return all products containing one or more Databases to us 5 Prices and programs are subject to change without notice 6 This License Agreement shall be governed by the laws of the State of Oklahoma and comprises the complete and exclusive understanding between you and us concerning the above subject matter Databases Limited Warranty We our or us refers to Navico the manufacturer of this product You or your refers to the first person who purchases the product as a consumer item for personal family or household use The Databases Limited Warranty applies to the one or more databases that your product may contain We refer to each of these as a Database or together as the Databases Your product may thus include the WBS Database which contains worldwide background surface mapping data the Indigo Database which contains inland mapping data or other Databases We warrant to you that we have accurately compiled processed and reproduced the portions of the sou
3. 2 Select Standby and Close Advanced Mode press ENTER a Enables advanced features and settings 3 Press any key to resume normal The following features are enabled when Advanced operation mode is turned on e Navigation Enables arrival radius off NOTE Leaving your unit in Standby course distance and Bearings setting DP mode when your boat is not in use will run down your battery e Alarms Enables arrival off course and anchor alarm options e NMEA 0183 configuration options i Restore defaults e Units Enables distance speed and bearings configuration options ar ana eringa to default values Reswee IEF Restore defaults Basic Operation Elite 4m HD 8 Pages Course over ground a Compass Direction to destination Current vessel location Going To Cursor ft XTE ftL M ETA PM Navigation 22231 information mph BRG M 14 Steer Page The Steer page has a compass that shows your current track the direction to your destination and a digital data navigation panel Current Cursor vessel location Waypoint N 36 24 725 H W 96 13 105 2 5mi 328 T Current location and distance bearing to cursor Zoom Range Chart Page Consists of a map that moves in real time as you move By default the map is shown from a birds eye view with North at the top of the screen Pages Elite 4m HD Overlay Data Used to select data shown on the Chart page data Show Enable
4. THIS LICENSE AGREEMENT CONSTITUTES ACCEPTANCE OF THESE TERMS AND CONDITIONS IF YOU DO NOT ACCEPT ALL TERMS AND CONDITIONS PROMPTLY RETURN THE PRODUCT WITHIN 30 DAYS OF PURCHASE PLEASE RETURN USING THE ENCLOSED UPS SHIPPING LABEL AND INCLUDE PROOF OF PURCHASE NAME ADDRESS AND PHONE NUMBER YOUR PURCHASE PRICE AND ANY APPLICABLE TAXES WILL BE REFUNDED PLEASE ALLOW 4 6 WEEKS TO PROCESS YOUR REFUND 1 This License Agreement applies to the one or more databases that your product may contain We refer to these singly as a Database and together as the Da tabases Your product may thus include the WBS Database which contains worldwide background surface mapping data the Indigo Database which contains inland mapping data or other Databases 2 The Databases that your product may contain are licensed not sold We grant to you the nonexclusive nonassignable right to use these Databases for supple mental navigation reference purposes but only as long as you comply with the terms and conditions of this License Agreement We reserve the right to terminate this license if you violate any aspect of this License Agreement You are responsible for using official government charts and prudent navigation for safe travel 3 The Databases housed in your product are protected by the copyright notices appearing on the product or its screen s You may NOT modify adapt trans late reverse engineer decompile disassemble rent lease
5. the Displayed feature to declutter the screen when multiple trails are visible on the map display Chart Operation Elite 4m HD 20 The Record command allows you to record or Overlay Data resume recording a trail l Allows you to select data to be displayed on top of the Chart page Delete and Delete All Delete is used to remove ZSE ind ivid ual trails Delete All ce Are you sure you want to delete removes all trails Soi it Trail Trail 1 Orientation Allows you to select North Up or Course Over Overlay data setup is covered in the Pages section Ground COG as the map orientation Settings Accesses the Chart settings menu 21 Chart Operation Elite 4m HD Chart Settings Controls map data used on the chart screen as well as display settings like grid lines waypoints routes and trails Lowrance Chart data Lowrance COG extension Off Grid lines Waypoints Routes Trails Waypoints Routes Trails Chart Settings menu Chart Data Selects map data that will be used on the Chart display Lowrance or Navionics regional map Go to Navionics com to see a full selection of available charts Chart Operation Elite 4m HD COG Extension A line extending from the front of the current position icon that estimates the time and distance to areas in front of you Grid Lines Displays base values for latitude and longitude making it easier to get a general idea of y
6. 0 52 AIS Vessel detail dialog 27 AIS Elite 4m HDI Settings Settings menu Accesses installation and configuration settings for your unit Language Audio Time Chart data Lowrance GPS COG extension Off Trip calculator Grid lines x Arrival radius Soft Wavpoi Advanced mode aypoints i Res Restore defaults Off course distance 100ft Trails Browse files Bearings Magnetic v Waypoints Routes Trails About Magnetic x Auto 5 0 p System Navigation Chart Alarms Distance Miles Units Speed MPH NMEA 0183 Output Sentences Depth Feet NMEA 0183 ics Simulator RG XI GGA Temperature Fahrenheit Ear eve Se tti n gs Z APB dene Bearings Magnetic Advanced mode menu PT only ig wate Simulate _ 4800 v Baud rate Options Save Cancel Advanced mode only Settings Elite 4m HD System Adjusts unit settings like language mute audio and advanced mode Select Language Dansk Deutsch Satellites EMnvik English US English UK Espanol Suomi Frangais Time Local time 10 41AM Time format 12 hour p Date format MM dd YYYY Save Close Trip calculator Reset trip 276 mph 0 00 mph Language Audio 0 00 00 Time pare GPS Enables Trip calculator Threshold Trip active ad va n ced 5 mph Close Advanced mode X features and Restore defaults Browse files settings A
7. 1 OE 8 Unit RV 3 Pages mmemmnennnnnnannnrnvnnnnnnnevnnsn 9 Basic Operation rseravnrnvrnnnnnvnnvnnnn BE FAGO EE 9 Setup wizard rrrrvnnnrnrevvrnrveverrnnnnvvrerrnsen 5 Chart Page mmmmmmenmmmnvvvnn 9 0 EE 5 Overlay Data 10 Page MENUS sereen 5 Chart Operation rrsernrsvrrrnvrrnnern 12 DIELO 0 7 Waypoints Routes Trails 13 Entering text cccccecccersessetsserseereereeere Z ROUES CC EE 15 CUPSOF oe cececcceseeseeseeseesseeseesterertreeseesees Z Mal SCI ee 19 eTo oko iio a 8 Orientation a caseensesemcetnnacsecacbaasneaen aco necosutes 21 Advanced Mode ccccccoccccccccccecccecee 8 WOVEN GY DAG QLusnermespneneraesaeroj 21 1 Table of Contents Elite 4m HD SUNE vic deentectaentonenteneimeencareesenetnernoncans 21 Chart Settings rrranrrnnnennnrnvanennnrnnnre 22 Navigation Settings eee 23 PRS esse 25 PS SOD uns 25 Target symbols 22 26 Viewing AIS target information 21 SENGS se 28 Settings MenU anrrnanrnnanrvnnnnvanennnennnne 28 SEE EE EE 28 Table of Contents Elite 4m HD Saving Screenshots ccccccseceseeeeees 30 AAS save 30 Specifications nrnnrnnnnnnnnnennnnnnennenn 32 NAG nn 33 Introduction Getting Started Unit Controls To turn on off the unit press and hold Turn unit LIGHT POWER controls backlight level on off the LIGHT POWER key for three and turns unit on off seconds KEYPAD controls cursor amp selects i
8. Elite 4m HD Edit and New Route dialogs Used to edit create routes route names and to turn on off the route display Displays hides route on the map Ae HE EI EI END EA EI EN AJ BY CIDFEVEIGIAF ITI KLMNOP QRS To edit create a route use the keypad to select the Route Leg Name field and press ENTER TUVWXYZe9 shift Space Clear QWERTY OK Cancel Addtoend View gt Stop editing To access the Edit or New Route dialog select Edit or New on the Routes menu and press ENTER Chart Operation Elite 4m HD To finalize changes on the Edit or New Route dialogs highlight the Done button and press ENTER Displayed You can use the Displayed feature to declutter the screen when multiple routes are visible on the map display Delete and Delete All Delete Route Delete is used to delete individual routes Delete All removes all routes 9 Are you sure you want to delete s Route Route 1 Delete Cancel 18 Trails Screen Used to create edit navigate and delete trails Use the keypad to highlight the Trails tab to access the Trails screen Waypoints Routes Trails Display Name Trail 1 Save to card Load from card Return to Chart Trails menu X Record Points 6322 Trails screen Creating trails When creating a trail you can customize the trail name and color from the New Trail Edit Trail New Trail Trail 1 Trail 3 X Di
9. LOWRANCE Elite 4m HD x T i EEEE E ee N icai Bi DF DE s pr m EERS js EE 7 a gt gt _ 7 E i N a Copyright 2014 Navico All rights reserved Lowrance and Navico are registered trademarks of Navico Fishing Hot Spots is a registered trademark of Fishing Hot Spots Inc Navionics is a registered trademark of Navionics Inc Navico may find it necessary to change or end our policies regulations and special offers at any time We reserve the right to do so without notice All features and specifications subject to change without notice Compliance Statements Lowrance Elite 4m HD e complies with CE under RTTE directive 1999 5 EC complies with the requirements of level 2 devices of the Radiocommunications Electromagnetic Compatibility standard 2008 The relevant Declaration of Conformity information is available on the this unit s product page at www lowrance com WARNING When a GPS unit is used in a vehicle the vehicle operator is solely responsible for operating the vehicle in a safe manner Vehicle operators must maintain full surveillance of all pertinent driving or 1 boating conditions at all times An accident or collision resulting in damage to property personal injury or death could occur if the operator of a GPS equipped vehicle fails to pay full attention to travel conditions and vehicle operation while the vehicle is in motion Table of contents Introduction g 100
10. N 36 27 401 W 96714 936 Save ance New waypoint Find Measure Waypoints Routes Trails Orientation North up oh a Overlay data COG up Settings Chart menu N 36 24 725 Bae W 96 13 105 2 5mi 328 T Chart Menu New Waypoint Creates a waypoint at your current location or at the cursor position When the cursor is on the screen waypoints will be saved at the cursor position If the cursor is not active waypoints will be saved at your current position Show X Configure Press MENU from the Chart page to open the Chart menu Press ENTER to launch the New waypoint dialog Chart Operation Elite 4m HD 12 Find Used to find tides and or currents on the screen when the screen is cluttered with chart details Measure The cursor can be used to measure the distance Find from Vessel Name Category Tides Close dialog between two items on the chart To measure distance Select Measure and press ENTER 1 2 Dist mi Move the cursor to the desired location The distance will measuring dialog be shown in the 13 3 To measure from the cursor position to a new location press ENTER and move the cursor to a new location 4 To stop measuring press MENU and select Stop measuring Waypoints Routes Trails Used to create edit navigate and delete way points routes and trails Press the keypad left right to toggle between waypoints rout
11. aintenance in accordance with the instructions of the owner s manual for the product We reserve the right to make changes or improvements in our products from time to time without incurring the obligation to install such improvements or changes on equipment or items previously manufactured This warranty gives you specific legal rights and you may also have other rights which may vary from state to state Your remedies under this warranty will be available so long as you can show in a reasonable manner that the defect occurred within one 1 year from the date of your original purchase and we must receive your warranty claim no later than 30 days after such 1 year period expires Your claim must be substantiated by a dated sales receipt or sales slip Contact information Customer Service 1 800 628 4487 8 30 a m to 5 p m Central Standard Time M F Canada 1 855 361 1564 canada navico com 8 a m to 5 p m Eastern Standard Time M F Ordering Accessories http store navico com Visit our website www lowrance com Visit our website www lowrance com x 988 105 81 002 x
12. bout System menu 0 00 mph Displays software information Restore Defaults 7 Are you sure you want to restore Na all defaults No Waypoints Routes or Trails will be lost Restore Cancel 28 Select Language Dansk Deutsch E Anvika English US Set Language Selects the language used on English UK menus and text boxes p Espa ol Suomi Frangais Audio Adjusts volume and turns on off unit audio like key beeps alarm sounds etc GPS Monitors the location of satellites in view and the quality of the unit s satellite lock on GPS Source WAAS MSAS EGNOS and Time features are accessed from the GPS dialog Hess data Satellites v i WAAS MSAS EGNOS amp 29 WAAS MSAS EGNOS Turns on off WAAS MSAS and EGNOS All three systems help increase GPS accuracy for different parts of the world Time Used to set local time and time and date formats for your unit Trip Calculator Tracks trip time speed and distance when you are moving faster than the selected threshold Advanced Mode Enables features and settings only available with unit in Advanced Mode Settings Elite 4m HD Restore Defaults Switches the unit back to default settings Browse Files Allows you to view a list of the files saved to a microSD card Saving Screenshots You can save screenshots to a microSD card by inserting a microSD card into the
13. card slot and pressing Power and then Zoom You can view files on a computer or other microSD compatible device About Displays software information about this unit Before attempting a software update you can check the version of software your unit is using by accessing the About screen Settings Elite 4m HD Lowrance periodically updates unit software to add features and improve functionality To see the latest available software version go to www lowrance com Alarms Enables alarms and selects alarm thresholds Arrival Off Course and Anchor alarms are only available in Advanced mode op S 200 Feet 0 0379 mi Enabled gt Radius 50ft Enabled Distance 100ft Arrival be z Off course Distance 100ft Anchor Alarms menu Anchor Radius Press DOY options 5 100 Feet 0 0190 mi 30 sounds alarm when you are within a selected distance of your destination Advanced Mode only Arrival sounds alarm when course exceeds a selected off course threshold Advanced Mode only Anch sounds alarm when vessel moves a selected nenor distance Advanced Mode only Off Course Units Allows you to select the unit of measure used by the unit Unit options vary depending on whether the unit is in basic or advanced mode Distance Miles U S Standard Speed MPH M U S Standard Depth Feet U S Nautical Metric Basic Mode Temperature Fahren
14. dd to end to add another waypoint to the route Repeat Steps 5 7 until the route is complete press MENU select Stop Editing and press ENTER Select Save and press ENTER Creating a route using points from chart 1 16 Repeat Steps 1 4 from the instructions for Creating a route from waypoint list Select Points using chart and press ENTER The chart page will appear Move the cursor to the desired location Press ENTER to set a point Repeat Step 3 to add more points Press MENU and select Stop adding Press ENTER Select Save and press ENTER Edit New Start Route Show PD Start navigating along Route Na Route 1 forward or reverse Forwar d Revers e Cancel D el ete Delete Route Sn D Are you sure you want to delete Delete All Routes 2 Route Route 1 D Are you sure you want to delete Delete a II er Ka 2 all Routes Save to card Load from card Return to Chart Routes menu gg The savi Navigating a route Routes can be navigated in forward or reverse 1 Highlight the desired route on the Route screen and press MENU 2 Select Start and press ENTER 17 Select Forward or Reverse and press ENTER Press MENU and select Return to Chart Press ENTER To cancel navigation 1 2 3 4 Press Menu from the chart screen Select Navigation and press ENTER Highlight Cancel and press ENTER Select Yes and press ENTER Chart Operation
15. e keypad to highlight the Routes tab to ac cess the Routes screen Waypoints Routes Trails Legs mi 2 Save to card Load from card Return to Chart Routes menu Routes screen Inserts waypoint between existing route waypoints Waypoint from list Edit Waypoint Name Point using chart Adds waypoint to end of the route Waypoint from list Insert Point using chart Edit Waypoint Add to end Remove Goto View Remove Waypoint From Route Are 9 you sure you want to remo hr ypoint 001 from the route Remove Cancel Stop editing Done Route waypoint menu Latitude Longitude z Total distance bearing Starts navigation to the selected route waypoint Leg distance bearing Latitude Longitude Creating a route Routes can be created by inserting waypoints from the waypoints list or by using the cursor to position points on the chart You also can add waypoints to a route by selecting them from the chart screen 15 Chart Operation Elite 4m HD Leg Name field To create a route from waypoint list 1 2 3 Press MENU from the Routes screen Select New and press ENTER Press the keypad down to highlight the Leg Name field and press ENTER Press MENU select Add to End and press ENTER Select Waypoint from list and press ENTER Select the desired waypoint and press ENTER Chart Operation Elite 4m HD 9 Press MENU and select A
16. es and trails tabs Waypoints Routes Trails Icon Name v Load from card Return to Chart Waypoints menu Waypoints Screen Chart Operation Elite 4m HD New Waypoint at Cursor Edit Waypoint Name ys Name 001 d 001 N 36923 384 W 96 14 292 es W 96914 936 Save Cancel Delete ETE NG Sort Nearest NETESE Name DEG EN Find Save to card Load from card Return to Chart Waypoints menu Load Waypoints Routes Trails File nameData ile name MapsO0 usr Version 3 0 gt Save Cancel Load Edit Edit Waypoint Allows you to edit the name hm Se oor icon and latitude longitude of a ME selected waypoint W 96 14 292 Save Cancel Chart Operation Elite 4m HD New New Waypoint at Vessel Name Creates a new waypoint at the cursor or vessel position You P 001 Vy N 36 22 880 can also select waypoint name ME icon and latitude longitude Save Cancel from the new waypoint dialog Show Displays the selected waypoint on the map Goto Allows you to navigate to a waypoint Delete and Delete All Delete is used to delete a ZST AN Are you sure you want to delete selected waypoint Delete KESINE minit All deletes all waypoints Delete Cancel 14 Sort Controls how the waypoints list will be sorted by name or by nearest Routes Screen Used to create edit navigate and delete routes Use th
17. heit Bearings True V Advanced Mode NMEA 0183 Output Advanced mode only You can select the NMEA 0183 sentences the unit will use when connected to a VHF radio or other NMEA 0183 device NMEA 0183 Output Sentences GPS GL X GGA RMC RMB XIGSA GSV X APB X Bwc Sonar amp DBT X vw amp DPT VHW amp mMTw You can also adjust the Baud rate but the default setting works best under most conditions Simulator Simulates GPS activity Simulations can be customized on the Simulator options menu Settings Elite 4m HD 6 6 H 168 mm x 3 8 W 96 mm 7 5 H 189 mm with bracket 4 3 diagonal 16 bit color TFT LCD IPX7 LED 11 levels Communications NMEA 0183 input output P Requirement Voltage Input 10 to 17V Case Size Display Waterproof standard Backlight Specifications Elite 4m HD 32 Mapping card slot microSD and microSDHC GPS Antenna High accuracy GPS antenna internal only Mapping compatibility Fishing Hot Spots amp Navionics Hotmaps Premium and Gold CMap Max N Insight Pro amp HD plus Insight Genesis Up to 3000 waypoints 100 routes 100 waypoints per route 100 retraceable plot trails up to 10 000 points per trail Waypoints Routes amp Trails Index A About 30 Advanced Mode 8 AIS 25 Filtering targets 26 Target symbols 26 Vessel detail dialog 27 Alarms 30 Anchor alarm 31 Arrival alarm 31 Arrival Radius 24 Bearings 24 Browse Fi
18. ils Basic Operation Elite 4m HD 6 ress UP DOWN LEFT RIGHT to DA N OT E Press th e M E N U key to exit ove the highlight on the screen menus ress ME far addtional options Switches letters to uppercase Dialogs lowercase A EN el GS a pa EJ Ea E LA EA spore VL Le DP EE eS ed KLMNOPQRSS TUVWXYZ 09 Dialogs are used for user input or ag for presenting information to the ug i Night mode E user Depending on the type of EIN Switches keyboard sui pae Clear entry different methods are used Power off between ALPHA and QWERTY OK Cancel to confirm cancel or close dialogs Close QWERTY layout Cursor Entering text The keypad moves the cursor around the display Some functions like naming a waypoint route or asked you to scroll the map and select map trail will require you to input text Press MENU and select Return to vessel or Exit To input text cursor mode to clear the cursor 1 Use the keypad to select the desired character and press ENTER 2 Repeat Step 1 for each character 3 When entry is completed highlight OK and press ENTER 7 Basic Operation Elite 4m HD Goto cursor Standby mode Used to navigate to the cursor Lowers power consumption by turning off sonar 1 Move the cursor to a desired location and the display and press MENU 1 Press the PWR LIGHT EZ Brightness 10 2 Select Goto cursor and press ENTER key to ACCESS the Night mode a Backlight dialog Standby Power off
19. les 30 C Cancel navigation 17 Chart 22 Chart Data 22 Chart menu 22 Chart Page 9 COG Extension 22 Creating a route 15 Creating trails 19 D Data Port 29 Dialogs 7 Dropdown menus 6 E Editing waypoints 14 G Goto cursor 8 Goto waypoint 14 GPS Source 29 GPS Status 29 Grid Lines 22 L Language 29 M Magnetic Variation 24 33 Man Overboard waypoint 3 microSD cards 4 Mute Audio 29 N Navigating a route 16 Navigating a trail 20 Navigation 23 Navigation menu 23 New Waypoint 12 NMEA 0183 31 O Off Course alarm 31 Off Course Distance 24 On Off features 6 Index Elite 4m HD Orientation 21 Overlay Data 10 21 Configure 10 Customizing 11 Show 10 P Page menus 5 R Route display 23 Routes Screen 15 S Saving Screenshots 30 Scrollbars 6 Setup wizard 5 Index Elite 4m HD Software Updates 30 Sort waypoints 15 Standby mode 8 Steer Page 9 System settings 28 T Text entry 7 Time 29 Trail display 23 Trails Screen 19 Turn unit on off 3 U Unit Controls 3 Units 31 W WAAS MSAS EGNOS 29 Waypoint display 23 Waypoints Routes Trails 13 Working with menus 6 34 Navico Databases License Agreement THIS IS A LEGAL AGREEMENT BETWEEN THE END USER WHO FIRST PURCHASES THIS PRODUCT AS A CONSUMER ITEM FOR PERSONAL FAMILY OR HOUSEHOLD USE YOU AND NAVICO THE MANUFACTURER OF THIS PRODUCT WE OUR OR US USING THE PRODUCT ACCOMPANIED BY
20. lts Navigation MENU New waypoint Waypoints Routes Trails Settings Steer menu Installation GY Do you want to run the setup Wizard Yes No New waypoint Find Measure Pages Waypoints Routes Trails This unit has two pages Steer and Chart Press the PAGES key to switch pages Orientation North up Overlay data gt Settings Chart menu Chart page 5 Basic Operation Elite 4m HD Accessing the Settings menu Working with menus EF There are several menu types used to make Navigation adjustments to options and settings including ee scrollbars on off features and dropdown menus Units NMEA 0183 Simulator Scrollbars Select the scrollbar and press the 18 keypad left decrease or right Accessing menu items increase The keypad and ENTER key are used to select menu items and open submenus Use the keypad to highlight the desired item and press ENTER On Off features Select the on off menu item and METER press ENTER to turn it on off Restore defaults Browse files System Chart data Lowrance Navigation COG extension Off Chart Alarms Waypoints Units Routes Nl af lt Grid lines pa x NMEA 0183 Trails Waypoints Routes Trails Dropdown menus Simulator Chart data Lowrance Access the dropdown menu PENT and press the keypad up down FETE to select the desired item and hems Routes press ENTER Tra
21. our location on the latitude longitude scale 22 Waypoints Routes and Trail displays From the Chart Settings menu you can turn on off waypoint route and trail display properties Turning off display properties allows you to get a better view of the map if the screen becomes cluttered with waypoints routes and or trails Waypoints Routes Trails Accesses the Waypoints Routes amp Trails screen Navigation Settings Advanced mode only Controls Arrival Radius and Off Course distance settings and is used to turn on off WAAS MSAS EGNOS Arrival Radius ess UP DOWN to adjust digit RIG 0050 Feet 0 0094 mi Arrival radius Off course distance Bearings Magnetic Magnetic v Auto 5 0 E Navigation Settings _ Manual 0 0 W Auto 5 0 E True Magnetic Chart Operation Elite 4m HD 23 Arrival Radius Sets the arrival radius threshold for the Arrival alarm The arrival alarm will sound when your ves sel comes within a selected distance arrival radius of the destination waypoint Off Course Distance Sets Off Course Distance threshold for the Off Course alarm When the selected off course dis tance is exceeded the Off Course alarm will sound when the alarm is enabled Bearings Controls whether bearing will be calculated using True North or Magnetic North Magnetic North should be used when navigating with a compass course or heading otherwise use the default se
22. rce material on which the Databases are based However we are under no obliga tion to provide updates to the Databases and the data contained in the Databases may be incomplete when compared to the source material WE MAKE NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND ABOUT THE ACCURACY OF THE SOURCE MATERIAL ITSELF INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MER CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE If there is a defect in any Database your exclusive remedy shall be at our option either a refund of the price you paid for the product containing the defective Database or a replacement of such product WE WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO ANY ONE FOR ANY SPECIAL CONSEQUENTIAL INCIDENTAL OR OTHER INDIRECT DAMAGE OF ANY KIND Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you This warranty does NOT apply in the following circumstances 1 when the product has been serviced or repaired by anyone other than us 2 when the product has been connected installed combined altered adjusted or handled in a manner other than according to the instructions furnished with the product 3 when any serial number has been effaced altered or removed or 4 when any defect problem loss or damage has resulted from any accident misuse negligence or carelessness or from any failure to provide reasonable and necessary m
23. s disables the display of meree overlay data allowing you to ESZ Shw X remove overlay data from the ae screen without deleting the current overlay data configuration Configure Allows you to select customize overlay data Pages Elite 4m HD Configure Items Configure Items to Show g GPS Ite sm amp Navigation amp Trip calculator a Time BEG Xi Time Date no year JTime no seconds B Sonar Add Sensor Data Done configuring To add overlay data 1 From the Chart page press MENU 2 Select Overlay data and press ENTER 3 Select Configure and press ENTER 4 Press Menu and select Add Press ENTER 5 Select a data category and press ENTER 6 Select the desired data and press ENTER 7 Repeat Steps 5 and 6 to add more data 8 Press MENU and select Return to Overlays Press ENTER 9 Press MENU select Done Configuring and press ENTER Customizing Overlay Data You can add remove data and adjust the size and position of overlay data on the screen Configure Items Item Time Move Size Small Add Remove Done configuring 1 Press MENU and select Overlay data Select Configure and press ENTER Highlight the desired overlay data and press MENU 4 Select the desired configuration category to make adjustments 11 Pages Elite 4m HD Chart Operation NMEA 0183 Simulator New Waypoint at Cursor Name 001
24. splayed X Displayed MX Record Save Cancel X Record Create route Save Cancel Edit New Show Delete Trail gt Are you sure you want to delete Trail Trail 1 Delete Cancel Delete All Trails Delete all D Are you sure you want to delete Na all Trails Save to card Delete all Cancel Load from card Return to Chart Trails menu Load Waypoints Routes Trails Save Waypoints Route ails oad ile name Maps0 usr File name Data Version 3 0 v Load Save Cancel To create a trail 1 Select New and press ENTER The New Trail dialog will appear 2 Select Save and press ENTER Chart Operation Elite 4m HD Edit and New Trail dialogs Navigating a trail Allows you to edit create trails select trails names A trail must be saved as a route before it can be trail color trail display and the trail being recorded navigated You can also convert a trail into a route from the T trail fa Edit Trails dialog o save a trail as a route 1 Highlight the desired trail on the Trails screen and press ENTER The Edit Trail menu will appear 2 Highlight Create Route and press ENTER The Edit Route menu will appear Highlight Done and press ENTER Turns on i X Record Turns on oe om tail ee off trail 4 For navigation instructions refer to the display cancel recording Navigating a route segment on map ENGE ame se Displayed and Record You can use
25. t ting True North Chart Operation Elite 4m HD Magnetic Variation Controls whether magnetic variation will be calcu lated using Automatic or Manual settings Magnet ic variation is the angle between magnetic north and true north The automatic setting reconciles the variation for you D WARNING You should only use the Manual magnetic variation setting if you have variation information from a verified source 24 AIS The marine Automatic Identification System AIS is a location and vessel information reporting system It allows vessels equipped with AIS to automatically receive position speed course and vessel identity information from other AIS equipped vessels If an AIS device is connected all targets detected by the device can be displayed System Navigation Chart Sonar Alarms Units NMEA 0183 AIS vessels Si Hide all Hide further than 2 mi v Hide slower than 4mph yr AIS Setup Before using AIS your unit must be set to the same Baud rate as your AIS device lt NOTE Your unit must be set to Advanced mode to access NMEA 0183 settings To select a Baud rate 1 2 3 25 Access the settings menu Select NMEA 0183 Access the Baud rate dropdown menu on the NMEA 0183 settings dialog Select the same Baud rate used by your AIS device Select Save NMEA 0183 Output Sentences GPS XGLL X GGA MRMC RMB XIGSA GSV X BWC X vLW X VHW XMTW 4800
26. tems Press the ZOOM IN and ZOOM OUT on menus keys at the same time to set a Man Man Overboard waypoint Your system will PAGES all er Overboard automatically create an active route KE Je waypoint back to the MOB waypoint You must cancel navigation to terminate the MENU opens settings context and page function menus ENTER finalizes menu selections save Adjusting This unit has 11 backlight levels Press waypoint at cursor position the the LIGHT POWER key to switch i backlight levels EO MOB press and hold both Zoom keys to backlight 3 create a Man Overboard waypoint Select Audio from the System menu ZOOM KEYS used to zoom in Select Mute and press ENTER used to zoom out microSD slot insert a blank microSD card to save screen captures sonar logs waypoints routes and trails or insert a microSD mapping card to use mapping data 3 Introduction Elite 4m HD Inserting microSD cards Carefully slide the microSD card into the slot until it clicks into place To remove carefully push in the card until it clicks out of place Introduction Elite 4m HD Basic Operation Page menus The Steer and Chart pages have menus that can Setup wizard only be accessed when those pages are displayed The Setup wizard will appear when the unit is turned on for the first time To choose your own settings do not run the setup wizard To restart the Setup wizard restore defau
Download Pdf Manuals
Related Search