L-54g Wireless
Contents
1. Bandwidth reservation Dynamic reservation of minimum and maximum bandwidths totally or connection based separate settings for send and receive directions Setting relative bandwidth limits for QoS in percent DiffServ TOS Priority queuing of packets based on DiffServ TOS fields Packet size control Automatic packet size control by fragmentation or Path Maximum Transmission Unit PMTU adjustment Layer 2 Layer 3 tagging Security Intrusion Prevention Automatic or fixed translation of layer 2 priority information 802 11p marked Ethernet frames to layer 3 DiffServ attributes in routing mode Translation from layer 3 to layer 2 with automatic recognition of 802 1p support in the destination device Monitoring and blocking of login attempts and port scans IP spoofing Source IP address check on all interfaces only IP addresses belonging to the defined IP networks are allowed Access control lists Filtering of IP or MAC addresses and preset protocols for configuration access Denial of Service protection Protection from fragmentation errors and SYN flooding General Detailed settings for handling reassembly PING stealth mode and AUTH port URL blocker Filtering of unwanted URLs based on DNS hitlists and wildcard filters Password protection Password protected configuration access can be set for each interface Alerts Alerts via e mail SNMP Traps and SYSLOG Authenticatio2. LANCOM L 54g Wireless Business access point for secure LAN extension Access point for 2 4 GHz operation with 54 108 Mbps with IEEE 802 11b g Secure wireless LAN through IEEE 802 11i IEEE 802 1x EAP LEPS with AES encryption in hardware Separation of user groups by Multi SSID and VLAN No problems installation even away from power supply points with Power over Ethernet Optional connection of external antennas Secure Internet access via the integrated DSL router with stateful inspection firewall with intrusion detection denial of service protection Optional Hotspot support LANCOM Systems As the link between local Ethernet and a wireless network LANCOM access points inject mobility and flexibility into company networks The LANCOM L 54g Wireless is an access point that offers maximum WLAN performance security and reliability As well as supporting the 108 Mbps standard IEEE 802 11g the LANCOM L 54g Wireless is also compatible to the widespread IEEE 802 11b standard so offering maximum flexibility in the office or for network coupling In combination with the LANCOM Public Spot Option the access point is also ideally suitable for setting up wireless Internet access services hotspots for example in hotels restaurants caf s airports railway stations universities or at trade fairs More Security LANCOM sets the standards in WLAN security A comprehensive range of security technologies is supported in wireless LAN i
3. H x D Power consumption max ca 4 5 Watts LAN CO M L 54g Wi reless Scope of features as of LCOS version 7 6x Declarations of conformity CE EN 301 489 1 EN 301 489 17 EN 60950 2 4 GHz WLAN ETS 300 328 Medical Medical conformity with EN 60601 1 2 Notifications Package content Certifications notified in Germany Belgium Netherlands Luxembourg Austria Switzerland UK Italy Spain France Portugal Czech Republic Denmark Malta Manual Printed User Manual DE EN and Quick Installation Guide DE EN FR ES IT PT NL CD CD with firmware management software LANconfig LANmonitor WLANmonitor and documentation Cable Serial configuration cable 1 5m Cable 1 Ethernet cable 3m Antennas Two 3 dBi dipole antennas Power supply unit Warranty 18 V DC external power adapter 230 V 3 years Support via Hotline and Internet KnowledgeBase Software updates Regular free updates LCOS operating system and management tools via Internet Accessories LANCOM WLC 4006 Service LANCOM Service Option 24h advance replacement within Germany 4 year warranty not for PoE Power Injector item no 61401 Public Spot LANCOM Public Spot Option authentication and accounting software for hotspots incl Voucher printing through Standard PC printer Item no 60642 LANCOM WLAN Controller for central management of 6 or 12 LANCOM access points and WLAN routers
4. files between similar devices e g for migrating existing configurations to new LANCOM products Detection and display of the LANCOM managed switches LANmonitor Monitoring application for Microsoft Windows for remote surveillance and logging of the status of LANCOM devices and connections incl PING diagnosis and TRACE with filters and save to file Search function within TRACE tasks Wizards for standard diagnostics Export of diagnostic files for support purposes including bootlog sysinfo and device configuration without passwords Monitoring of the LANCOM managed switches WLANmonitor Monitoring application for Microsoft Windows for the visualization and monitoring of LANCOM WLAN installations incl Rogue AP and Rogue Client visualization Firwall GUI Graphical user interface for configuring the object oriented firewall in LANconfig Tabular presentation with symbols for rapid understanding of objects choice of symbols for objects objects for actions Quality of Service remote sites services default objects for common scenarios individual object definition e g for user groups WEBconfig Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP Similar to LANconfig with a system overview syslog and events display symbols in the menu tree quick access with side tabs WEBconfig also features Wizards for basic configuration security Internet access LAN LAN coupling Online h
5. item no 61367 LANCOM WLC 4006 UK LANCOM WLAN Controller for central management of 6 or 12 LANCOM access points and WLAN routers item no 61368 for UK LANCOM WLC 4025 LANCOM WLAN Controller for central management of 25 50 or 100 LANCOM access points and WLAN routers item no 61550 LANCOM WLC 4025 UK LANCOM WLAN Controller for central management of 25 50 or 100 LANCOM access points and WLAN routers item no 61551 for UK External antenna gt irLancer Extender 0 30 2 4 GHz outdoor antenna item no 60478 External antenna irLancer Extender 0 70 2 4 GHz outdoor antenna item no 60469 External antenna irLancer Extender O D80g 2 4 GHz dual linear polarisation diversity outdoor sector antenna item no 61221 External antenna irLancer Extender 60ag dualband indoor sector antenna item no 61214 External antenna Antenna cable irLancer cable NJ NP 3m antenna cable extension item no 61230 Antenna cable irLancer cable NJ NP 6m antenna cable extension item no 61231 Antenna cable A A A AirLancer Extender l 180 omnidirectional 2 4 GHz indoor antenna item no 60914 A A A irLancer cable NJ NP 9m antenna cable extension item no 61232 LANCOM L 54g Wireless Surge arrestor antenna cable Scope of features as of LCOS version 7 6x AirLancer Extender SA 5L surge arrestor 2 4 and 5 GHz item no 61553 Surge arrestor LAN cab
6. bps Radio channels 2 4 GHz Up to 13 channels max 3 non overlapping 2 4 GHz band Roaming Seamless handover between radio cells IAPP support IEEE 802 11d support WPA2 fast roaming Pre authentication and PMK caching for fast roaming Fast client roaming With background scanning moving LANCOM client mode access points pre authenticate to alternative access points which offer a better signal before Roaming fails VLAN VLAN ID definable per interface WLAN SSID point to point connection and routing context 4094 IDs Dynamic VLAN assignment Dynamic VLAN assignment for target user groups based on MAC addresses BSSID or SSID by means of external RADIUS server Q in Q tagging Support of layered 802 1q VLANs double tagging Multi SSID Simultaneous use of up to 8 independent WLAN networks per WLAN interface Security IEEE 802 111 WPA2 with passphrase or 802 1x and hardware accelerated AES closed network WEP64 WEP128 WEP152 user authentication 802 1x EAP LEPS WPA1 TKIP RADIUS server Integrated RADIUS server for MAC address list management EAP server Integrated EAP server for authentication of 802 1x clients via EAP TLS EAP TTLS PEAP MSCHAP or MSCHAPv2 Quality of Service Prioritization according to Wireless Multimedia Extensions WME subset of IEEE 802 11e Bandwidth limitation Each WLAN client MAC address can be assigned maximum transmit and receive rat
7. d on routing tags tagging based on firewall rules dynamic routing with RIPv2 VRRP rapid spanning tree protocol to support redundant routes in Ethernet networks WLAN client Stateful inspection firewall Transparent WLAN client mode for wireless Ethernet extensions e g connecting PCs or printers by Ethernet up to 64 MAC addresses Incoming Outgoing Traffic inspection based on connection information Trigger for firewall rules depending on backup status e g simplified rule sets for low bandwidth backup lines Limitation of the number of session per remote site ID Packet filter Check based on the header information of an IP packet IP or MAC source destination addresses source destination ports DiffServ attribute remote site dependant direction dependant bandwidth dependant Extended port forwarding Network Address Translation NAT based on protocol and WAN address i e to make internal webservers accessible from WAN N N IP address mapping N N IP address mapping for translation of IP addresses or entire networks Tagging The firewall marks packets with routing tags e g for policy based routing Actions Forward drop reject block sender address close destination port disconnect Notification Via e mail SYSLOG or SNMP trap LAN CO M L 54g Wi reless Scope of features as of LCOS version 7 6x Quality of Service Traffic shaping Dynamic bandwidth management with IP traffic shaping
8. elp for parameters in LCOS menu tree Device Syslog Syslog buffer in the RAM size depending on device memory to store events for diagnosis Default set of rules for the event protocol in Syslog The rules can be modified by the administrator Display and saving of internal Syslog buffer events from LANCOM devices with LANmonitor display only with WEBconfig Access rights Individual access and function rights for up to 16 administrators User administration RADIUS user administration for dial in access PPP PPTP Support for RADSEC Secure RADIUS providing secure communication with RADIUS servers Remote maintenance Remote configuration with Telnet SSL SSH with password or public key browser HTTP HTTPS TFTP or SNMP firmware upload via HTTP HTTPS or TFTP Remote maintenance of 3rd party devices A remote configuration for devices behind der LANCOM can be accomplished after authentication via tunneling of arbitrary TCP based protocols e g for HTTP S remote maintenance of VoIP phones or printers of the LAN TFTP amp HTTP S client For downloading firmware and configuration files from an TFTP HTTP or HTTPS server with variable file names wildcards for name MAC IP address serial number e g for roll out management Commands for live Telnet session scripts or CRON jobs Security Access rights read write over WAN or W LAN can be set up separately Telnet SSL SSH SNMP HTTPS HTTP acc
9. es and an individual VLAN ID Background scanning Detection of rogue AP s and the channel information for all WLAN channels during normal AP operation The Background Scan Time Interval defines the time slots in which an AP or Router searches for a foreign WLAN network in its vicinity The time interval can be specified in either milliseconds seconds minutes hours or days Client detection Rogue WLAN client detection based on probe requests 802 1x supplicant Authentication of an access point in WLAN client mode at another access point via 802 1X EAP TLS EAP TTLS and PEAP Note WLAN access point WLAN operating modes The effective distances and transmission rates that can be achieved are depending of the site RF conditions Infrastructure mode autonomous operation or managed by LANCOM WLAN Controller WLAN bridge Point to multipoint connection of up to 7 Ethernet LANs mixed operation optional broken link detection blind mode up to 32 VLANs simultaneously for WLAN connections When configuring Pt to Pt links pre configured names can be used as an alternative to MAC Adresses for creating a link WLAN router Use of the LAN connector for simultaneous DSL over LAN IP router NAT Reverse NAT IP masquerading DHCP server DHCP client DHCP relay server DNS server PPPoE client incl Multi PPPoE PPTP client and server NetBIOS proxy DynDNS client NTP port mapping policy based routing base
10. ess control list Scripting Scripting function for batch programming of all command line parameters and for transferring partial configurations irrespective of software versions and device types incl test mode for parameter changes SNMP SNMP management via SNMP V2 private MIB exportable by WEBconfig MIB II Timed control Scheduled control of parameters and actions with CRON service Diagnosis Extensive LOG and TRACE options PING and TRACEROUTE for checking connections LANmonitor status display internal logging buffer for SYSLOG and firewall events monitor mode for Ethernet ports LANCOM WLAN Controller Supported by all LANCOM WLAN Controller separate optional hardware equipment for installation optimization operating and monitoring of WLAN networks except for P2P connections Hardware Power supply Statistics Extensive Ethernet IP and DNS statistics SYSLOG error counter Accounting Connection time online time transfer volumes per station Snapshot function for regular read out of values at the end of a billing period Export Accounting information exportable via LANmonitor and SYSLOG 12 V AC or 18 V DC external power adapter 230 V Power supply Via Power over Ethernet compliant with IEEE 802 3af Environment Temperature range 0 50 C humidity 0 95 non condensing Housing Robust synthetic housing rear connectors ready for wall mounting Kensington lock 210 x 45 x 140 mm W x
11. le AirLancer Extender SA LAN surge arrestor LAN cable item no 61213 Documentation LANCOM LCOS Reference Manual DE item no 61700 Power over Ethernet Injector LANCOM PoE Power Injector item no 61502 EU and 61503 UK Power over Ethernet Switch LANCOM ES 1108P 8 port Fast Ethernet switch with 4 PoE ports item no 61450 EU and 61449 UK Power over Ethernet Switch LANCOM ES 2126P 24 port Fast Ethernet PoE switch 802 3af max 185 W 2 Gigabit ports 2 SFP slots item no 61451 EU and 61453 UK Note The Polarization Diversity antennas require 2 cables and surge arrestors bulk LANCOM L 54g Wireless 61101 LANCOM L 54g Wireless UK 61103 LANCOM L 54g Wireless 10 piece 61121 bulk LANCOM L 54g Wireless UK 10 piece 61132 www lancom eu LANCOM Systems GmbH Adenauerstr 20 B2 52146 Wuerselen Deutschland E Mail info lancom eu Internet www lancom eu LANCOM Systems LANCOM LANCOM Systems and LCOS are registered trademarks All other names or descriptions used may be trademarks or registered trademarks of their owners Subject to change without notice No liability for technical errors and or omissions 03 09
12. n mechanisms EAP TLS EAP TTLS PEAP MS CHAP MS CHAPv2 as EAP authentication mechanisms PAP CHAP MS CHAP and MS CHAPv2 as PPP authentication mechanisms WLAN protocol filters Limitation of the allowed transfer protocols source and target addresses on the WLAN interface Adjustable reset button Adjustable reset button for ignore boot only and reset or boot IP redirect High availability redundancy Fixed redirection of any packet received over the WLAN interface to a dedicated target address VRRP VRRP Virtual Router Redundancy Protocol for backup in case of failure of a device or remote station Enables passive standby groups or reciprocal backup between multiple active devices including load balancing and user definable backup priorities FirmSafe For completely safe software upgrades thanks to two stored firmware versions incl test mode for firmware updates Analog GSM modem backup Optional operation of an analog or GSM modem at the serial interface Line monitoring Routing functions Router Line monitoring with LCP echo monitoring up to 4 addresses for end to end monitoring with ICMP polling IP and NetBIOS IP multi protocol router Advanced Routing and Forwarding Separate processing of 8 contexts due to virtualization of the routers Mapping to VLANs and complete independent management and configuration of IP networks in the device i e individual settings for DHCP DNS Firewalli
13. ncluding IEEE 802 11i 802 1x WPA WPA2 WEP64 128 152 access control lists or LEPS LANCOM Enhanced Passphrase Security which enables the configuration of an optimized solution whatever the individual requirements For example Multi SSID allows the definition of up to 8 user groups each with its own level of security More Management LANCOM developments are focused on performance security and on management too LANCOM s WLAN Controllers offer real benefits to network administrators for the installation control and monitoring of access points Settings for wireless encryption or access control lists can be grouped into device configurations which are then executed for multiple access points in one easy move Access points are commissioned and RF optimization carried out automatically Changes are transmitted to all of the devices automatically and subsequently monitored WLANmonitor visualizes the structures of the WLAN irrespective of physical location and facilitates the central surveillance of the entire wireless network More Reliability for the Future From the very start LANCOM products are designed for a product life of several years They are equipped with hardware dimensioned for the future Even reaching back to older product generations updates to the LANCOM Operating System LCOS are available several times a year free of charge and offering major features LANCOM offers unbeatable protection of your investment Mo
14. net 802 1d Spanning Tree and 802 1w Rapid Spanning Tree support for dynamic path selection with redundant layer 2 connections PPPoE Multi PPPoE ML PPP PPTP PAC or PNS and plain Ethernet with or without DHCP RIP 1 RIP 2 VLAN IP LANCOM L 54g Wireless Interfaces Scope of features as of LCOS version 7 6x LAN 10 100Base TX autosensing auto node hub PoE compliant with IEEE 802 3af DSL over LAN DSLoL The LAN port can even parallel to LAN mode be used as a WAN port for connecting external DSL modems PPPoE or external routers Serial interface Serial configuration interface COM port 8 pin Mini DIN 9 600 115 000 baud suitable for optional connection of analog GPRS modems External antenna connectors Management LANconfig Two reverse SMA connectors for external LANCOM AirLancer Extender antennas or for antennas from other vendors Please respect the restrictions which apply in your country when setting up an antenna system For information about calculating the correct antenna setup please refer to www lancom systems com Configuration program for Microsoft Windows incl convenient Setup Wizards Optional group configuration simultaneous remote configuration and management of multiple devices over IP connection HTTPS HTTP TFTP Configuration program properties per project or user Automatic storage of the current configuration before firmware updates Exchange of configuration
15. ng QoS VLAN Routing etc Automatic learning of routing tags for ARF contexts from the routing table HTTP HTTP and HTTPS server for configuration by web interface DNS DNS client DNS server DNS relay DNS proxy and dynamic DNS client DHCP DHCP client DHCP relay and DHCP server with autodetection NetBIOS NetBIOS IP proxy NTP NTP client and SNTP server automatic adjustment for daylight saving time Policy based routing Policy based routing based on routing tags Based on firewall rules certain data types are marked for specific routing e g to particular remote sites or lines Dynamic routing COM port forwarding LAN protocols IP COM port server Dynamic routing with RIPv2 Learning and propagating routes separate settings for LAN and WAN Extended RIPv2 including HopCount Poisoned Reverse Triggered Update for LAN acc to RFC 2453 and WAN acc to RFC 2091 as well as filter options for propagation of routes Definition of RIP sources with wildcards COM port server for the DIN interface For a serial device connected to it the server manages its own virtual COM port via Telnet RFC 2217 for remote maintenance works with popular virtual COM port drivers compliant with RFC 2217 ARP proxy ARP BOOTP DHCP DNS HTTP HTTPS IP ICMP NTP SNTP NetBIOS PPPoE server RADIUS RIP 1 RIP 2 RTP SIP SNMP TCP TFTP UDP VRRP VLAN Rapid Spanning Tree WAN protocols Ether
16. re Independence Equally forward looking is the support for the Power over Ethernet standard The alternative of supplying electrical power via the network cable enables access points to be positioned fully independently of the conventional electricity supply and its power points What s more To complete the WLAN portfolio LANCOM also offers suitable AirLancer client adapters and a large selection of high end antennas for professional indoor and outdoor applications LANCOM L 54g Wireless Scope of features as of LCOS version 7 6x WLAN Frequency band 2 4 GHz 2400 2483 5 MHz ISM Data rates 802 11b g 54 Mbps to IEEE 802 11g fallback to 48 36 24 18 12 9 6 Mbps Automatic Rate Selection compatible to IEEE 802 11b 11 5 5 2 1 Mbps Automatic Rate Selection 802 11 b g compatibility mode or pure g or pure b Super A G with Turbo Mode 108 Mbps bursting compression Range 802 1 1a b g Up to 150 m up to 30 m in buildings Output power at antenna connector 2 4 GHz 802 11b 19 dBm 1 and 2 Mbps 19 dBm 5 5 and 11 Mbps 802 11g 19 dBm 6 Mbps 14 dBm 54 Mbps Max radiated power EIRP 2 4 GHz band 802 11b g Up to 20 dBm 100 mW EIRP transmission power control according to TPC or manual settings Minimum transmission power Transmission power reduction in software in 1 dB steps to min 0 5 dBm Reception sensitivity 2 4 GHz 802 11b 87 dBm 11 Mbps 94 dBm 1 M
Download Pdf Manuals
Related Search