Home

BGV C1 BGV D8 igvw SQ P2 D8 Plus EN 61508 SIL 1

1. net work the Movecat MPC and V Motion Power Controllers and forms with them a clo sed safety network An error in one unit is analysed cen trally represented visually and leads depending upon the system configuration to the immediate shutting down of a hoist drive the group to which it belongs or even the entire system The safe and intuitive entry of key operating and run parameters is facilitated by a user optimized input key board with tactile feedback and a high resolution rotary encoder with a button func tion A large 12 backlit 4C LCD touchscreen provi des further input and takes over the visual display of the operating input and sys tem parameters in 2D or 3D according to choice The user therefore has an overview of the rig and instant access to parameters and details Complex target and group runs even in the case of possible interactions can be programmed and executed depending upon the drive configuration The Basic controller is sys tem and software compati ble with the 1 Expert controllers and can be used 12 2 P0ELZ7L as a backup system For the immediate triggering of kinetic run activities a GO button and a rotary push button encoder are available for the recall and execution of scene changes and shows as well as adjustment of their speeds An integrated SSD disk drive as storage medium allows the saving of all system parameters and numerous shows the act
2. Additional digital inputs and outputs for remote functions Motion network input network address determinable Robust metal housing with two handles Analogue input for MRC optional operation of four OMK or VMK hoists are integrated A modular concept has been realized that can be adapted precisely to the demands of the user The system corre sponds in its basic configu ration to BGV C1 but can be optionally upgraded for applications up to EN 61508 SIL 3 and therefore for sce nic runs over human beings The MPC 4IC1 is prepared for Motion network opera tion and up to 60 devices can be operated in linked decentralized group mode with the NDB modules via I Motion network by means BT jas Pa DS depending upon configuration of a central controller e g I Motion Expert T Il or Basic The clearly identifiable input buttons in combination with a rotary push button encoder permit the simple and intui tive configuration and hand ling of the controller The user is guided by a logical operating structure with dis play output Even target and group runs can be program med and executed by this means depending upon the drive configuration The 4IC1 solution is recommended for use with the OMK or VMK hoists for professional BGV C1 applications in the trade fair events studio and touring sectors Copyright 2014 THINK ABELE GmbH amp
3. KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 0170 32 9851 0 49 0170 32 98 51 99 contact movecat de www movecat de MOVECAT MPC 4IC1 Motion Power Controller compliant with BGV C1 EN 61508 a SIL 1 to SIL 3 FEATURES Standard configuration according to BGV C1 Three separate CPUs for input output program and network with watchdog for mutual supervision Optionally upgradable with dual CPU to EN 61508 SIL 3 Controls and supervises up to four OMK or VMK chain hoists or adapted asynchronous three phase drives fixed speed Night design buttons and input devices illuminated Self testing of relevant functions prior to system enabling Simple intuitive operation oelection of possible drive parameters from stored database Supervision and display of operating states such as ope rating voltage and phase operation and emergency stop temperature as well as load errors run direction and readiness protection safety relay position and under load or else dynamic load 5 Supervision of the run direction and target speeds when encoder operated error analysis of individual hoist and connected group oad group transcending error supervision even in groups of up to 60 other MPC 4IC1 controllers Technical data Input 16 A CEE with phase changing plug HP Version 32 A Four drive outputs PMC C8 24FC plug system MRC 4EC1 I input plug in connector C
4. dynamic LME LMS system 3 strain gauge principle 2 with x kit or I controller 9 with l controller and additional equipment hand and electric MPC 108 ED8 108 series and MRC DC series MPC 108 ED8 LD8 RC series transport case rain cover ECOlite 1000 8 1000 kg 12000 kg 8 m min 4 m min TEZ 2 20 kW 25 150 7x22 mm 51 kg 61 kg 374x2 75x234 ECOlite 2500 8 2500 kg 15000 kg 8 m min 4 m min 1 2 3 00 kW 25 150 11x31 mm 145 kg 168 kg 643x435x490 Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 98 51 99 contact movecat de www movecat de COMPACT 500 4 MOVECAT COMPACT 500 4 chain hoist DC and RC model compliant with BGV D8 The hoists in Movecat s Compact series represent a logical further development of the tried and tested ECO series It was designed to satisfy the requirements of practical rigging appli cations combining reliable and safe operation with a compact lightweight format and simple service friendly handling Their principal characteri stic is a well balanced cen tral transmission block to which the drive motor is flange mounted directly at the side This makes possi ble in connection with the protected fan wheel op timal heat dissipation and thereby an extended duty cycle Thanks to the off centre modular structu
5. DYNAMIC STAGE TECHNOLOGY LO 0 Ix 3 0 SAFETY FIRST MADE IN GERMANY 2 0 4j 4 BGV C1 BGV D8 igvw SQ Pe 08 Plus EN 61508 SIL 1 SIL 3 MOVECAT ECOlite DC and RC model chain hoists compliant with BGV D8 and igvw SQ P2 Movecat s ECOlite chain hoists were developed as economical rigging hoists for use in environments contai ning media equipment They are the first choice when it comes to the safe and reli able hoisting and positioning Basic configuration 18 24 m hoisting height of trusses stages ground support structures and other devices used in media appli cations Despite the attrac tive price point even in the basic configuration great importance has been atta ched to professional quality and first class safety equip ment Five fold safety for the chain as well as a high quality transmission and an effici ent DC brake in combinati on with a patented overload system naturally are stan dard features of this series The Basicplate chain guide ensures reliable chain trans mission and reduces the risk of the chain jamming The hoists are exceptionally light as well as compact and are recommended in particular for applications where space is limited All hoists can be used wit hout conversion either as direct control 400 V AC or remote control 24 V DC DC brakes 1 overload protection by means of pat friction clutch high quality specially hard
6. free use even under stress ful tour conditions All impor tant parts feature a matt black finish with a special protective coating to guard against corrosion on tour and an extensive range of acces sories is available for use on the road Key facts The technical refinements of the entertainment winch include a dynamic load sys tem that is independent of the installation position and isolated from the drive influ ences normally encountered The effective load is ascer tained and evaluated in every installation position An inte grated cable guide with a central cable outlet located in the middle of the front side allows optimal central load application when used with trusses and optimal operati on of manned airframes with two winches placed opposite the distance between the two ropes being only 15 cm Heduced noise operation as well as such features as two independent noiseless brakes with contact free monitoring high resolution independent absolute and incremental encoders a four level gear limit switch for separate working and emergency eva luation motor temperature Technical equipment 122 27 BELAT monitoring a dynamic load measuring system with func tion testing as well as addi tional variable receptacles for truss couplers round off this highly practical package In closed loop mode hove ring true zero speed and a change of run direction are possible without incursion of the brakes Tri
7. 8 m min 4 m min 1 2 3 00 kW 250 150 11 31 145 kg 168 kg 643x435x490 Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 98 51 99 contact movecat de www movecat de PLUSlite 2012 MOVECAT PLUSIite 1000 4 DC and RC model Chain hoist compliant with igvw SQ P2 D8 Plus DIN 56950 2012 05 The PLUSIite 1000 4 satisfi es the wish of many users for a single chain fall D8 Plus rig ging hoist with a lifting capa city of 1000 kg at 4 m min The Movecat PLUS 1000 4 is based on DIN 56950 1 2012 5 and satisfies the BG requirements in full The mechanism is designed for twice the nominal load and the load chain exhibits dyna mic and static safety factors of 8 1 and 10 1 respectively With its compact aluminium housing 9 x 27 load chain two robust handles and total weight of 115 kg with a hois ting height of 18 m it is suitable for day to day tou ring and rental applications The Basicplate chain guide ensures reliable chain trans mission and reduces the risk of the chain jamming The hoist can be used in clim bing or standard installation positions without conversi on Above all when used as a climbing hoist in combi Basic configuration 18 24 m hoisting height nation with Movecat cases which were developed in clo se cooperation with users ideal road operation is gua ranteed as the chain
8. Hoisting speed Hoisting height Chain falls Power supply Motor power Duty cycle Mechanism group Load chain Independent DC brakes Protection rating Dimensions HE version L x W x H without chain hook and chain container Weight incl 18 m chain Weight incl 24 m chain PLUSIite 2012 1000 4 DIN 56950 1 2012 05 1 000 kg 4 m min 18 m 24m others on enquiry 1 400 V 3 PH 50 Hz 2 2 kW 25 9 0 ISO FEM 1BM M3 EN 818 7 DAT 9 x 27 mm e IP 54 506 x 435 x 531 mm 115 kg 135 kg 22 247 BELAT Options Accessories ouspension motor hook optional swivel adapter with ring eyelet hook block for dual chain fall operation Hoisting height up to max 60 m 1 chainfall x2 kit for the internal evaluation of a e track geared limit switch in DC operation Internal control connector cable multicorecable with 6 pin multipin connector RC models geared limit switch for RC and DC incremental encoder Limit switching absolute encoder dynamic LME LMS system 2 strain gauge principle Load sensing 1 with x kit or l controller 2 with l controller and additional equipment hand and electric 108 ED8 LD8 TD8 series and MRC DC series MPC 108 ED8 LD8 RC series transport case rain cover Running gear Controllers DC Controllers RC Miscellaneous Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringe
9. MOVECAT I Motion Basic S Show Controller compliant with 08 and as well as igvw SQ D8 Plus EN 61508 SIL 1 to SIL 3 depending upon configuration I MOTION BASIC S FEATURES Standard configuration according to BGV C1 EN 60204 1 and 32 EN 13849 1 and EN 61508 Safety processor with risk structure 32 bit high performance bus system 2 channel safety computer according to SIL Power saving CPU technology Operating states stored in non volatile RAMs Self testing of relevant functions prior to system enabling Simple intuitive operation using a 12 touchscreen and direct input via a function keyboard as well as a high resolution rotary encoder with key C425e function a 12 AC LCD touchscreen backlit Group transcending error supervision when connected in a network Supervision and display of the operating states of the hoists drives such as run direction speed position operating and emergency limit excess temperature brake gap monitoring dynamic load analysis as well as load and run groups User ID chip card with level structure Technical data 230 V 50 Hz electricity supply Dimensions 19 BU 483 x 265 x 220 mm width x height x depth without plug in connector Weight 6 5 kg BGV D8 igvw SQ 208 Plus conformity and EN 61508 SIL 3 conformity Options Accessories External remote units GO Emergency Off control lever dead man functio
10. 0 04 of reference value K Operating conditions 20 to 50 C 1 5 m DC4 data connection cable with C4M data cable connector Dimensions LMS M 250 500 205 x 55 x mm LMS M 500 1000 220 x 65 x mm L MS M 1500 3000 280 x 80 x 45 mm H x W x D without connector cable Weight LMS M 250 500 0 6 kg LMS M 500 1000 1 0 kg LMS M 1500 3000 2 3 kg Protection rating IP 67 BGV D8 C1 igvw SQ D8 Plus as well as EN 61508 SIL 3 conformity The values depend upon the use and force transmission They were achieved under favourable conditions according to the user manual FS D8 rated load SMGUELAT Irma pe A Anon Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49101 70 32 98 51 0 49 0170 32 98 51 88 contact movecat de www movecat de MPC 2 4 6 8LD8 MOVECAT MPC 2 4 6 8LD8 Motion Power Controller DC and RC model compliant with BGV D8 and igvw SQ P2 D8 Plus The Motion Power Con trollers of the Lite series in direct control 400 V AC or remote control 24 V DC version represent an exten sion to the practice proven Movecat kinetic control ler series They were desi gned as simple stand alone solutions for small rigging applications but without any compromises being made in terms of either ergonomics or safety They unite in a robust 3U or else 5U metal housing all the relevant components for the safe contro
11. 40 55 75 MOVECAT V MOTION 15 30 40 55 75 Variable Motion Powerpack compliant with BGV C1 and EN 61508 SIL 1 to SIL 3 depending upon configuration V Motion Variable Motion Powerpacks are designed for use in combination wi th drives of the V series from Movecat They provide in this combination for intelli gent and safe kinetic setups supporting variable speeds meeting the highest techni cal standards and complying with BGV C1 The power packs can be configured for a variety of different V se ries drives V Motion 15 for drives up to 1 5 kW V Motion 75 for motors ra ted up to 7 5 kW A large backlit LCD shows the operating states as well as the position load and operating parameters of the connected hoist Main and safety processors monitor all functions The requisite contactor switches and sa fety circuits for overload and underload protection as well as operating and emergency limit Switches are integrated These are complemented by run commands the execu tion of which and resulting internal operating states are tested and evaluated In the Motion network these are compared with parallel V Motion power packs and the correctness of the way time and load group run te sted V Motion power packs sup port speeds continuously variable from zero to maxi mum as a closed loop system with full torque even during runs continuing beyond the null point true zero speed and reversal of direction wit hout i
12. 98 51 0 49 0170 32 98 51 99 contact movecat de www movecat de EI TDVGELSATT I MOTION EXPERT T 11 Chip card evaluation with user level Analysis of external setup signals Download function of the drive parameters Speed way points for fixed profile a Profile and snapshot recorder Input of software operating limit positions Management of free and closed drive groups Path and time synchronous group run Group synchronous run central up down movement of previ ously selected hoists axes programmable with multiple run groups Programming and recall of complex successive show sequences Acceleration and braking of drives and groups Object mode with object group function Supervision of the run direction and target speeds and complementary overload ascertainment through analysis Software of the rated speed when encoder operated Movecat I Motion Simple setup possibility for underload and overload finition Management of up to 240 drives or network controllers aout with IP address a Drive patch for the global exchange of hoists drives in shows 20 30 representation switchable zoomable Driver s log function allows display and export Unlimited number of shows and scene changes cues Import export of show files on server and USB memory stick Expanded operating display level a second monitor DVI Out Operation with and without server connec
13. BGV 08 and igvw SQ P2 D8 Plus DIPFHIUELHTT The Motion Power Controller 4108 is based on the es tablished industry standard MPC 4ED8 controllers and represents an intelligent con trol unit for the governance of asynchronous three phase drives such as the Movecat ECO PLUS Compact and Plus C chain hoists and their Lite counterparts compliant with D8 and D8 Plus This is an independent control plat form by means of which up to four hoists or drives se ries in direct control 400 V AC or remote control 24 V DC version can be directly operated in an operationally secure and user safe fashion without any additional control devices A large back lit LCD Technical data PL LO TERDUM displays the operating states and parameters The inte grated operating and safety processors monitor all func tions whereby the general evaluation of all safety rele vant parameters including all run states is implemented as a superordinate safety chain Any operating error therefore leads invariably to the shutting down of the con nected drives The relays and safety circuits required for the operation of up to four chain hoists are integrated The system corresponds in its basic configuration to the sti pulations of BGV D8 and D8 Plus in accordance with igvw SQ Pe A modular concept input 16 CEE 5 pin phase changing plug with 1 5 m HOZRN F connector cable 32 A CEE 5 HP version XLR MX7
14. The all in one touring racks of the Movecat TD8 series set new standards in terms of compact construction operating ergonomics and safety for motor controllers in accordance with BGV D8 and igvw SQ Pe D8 Plus They correspond to the current EN 60204 32 EN 13848 1 and VDE 0113 guidelines The safety sys tems and power switching components are supervised in a read back safety chain FEATURES to achieve an alltime high in operating safety In addi tion the relevant operating states are systematically illuminated The racks unite the con trol components necessary for operation in a compact shock resistant road case The integrated power station takes over the distribution and protection of the con troler modules as well as the supervision of the power supply including any necessa ry correction of the rotating field Both Single mode Lift Lower single selection of the hoists and alternatively Master mode central Lift Lower selection of all hoists with a single switch are available In addition a DMB system enabling dead man button is integrated Depending upon the rack up to four external three stage per mission buttons be connected Especially with larger rig constructions it is necessary to supervise these from different positions duri ng the run to ensure that even in the case of systems extending over large areas runs are performed safely Series devices have been further enhance
15. an MRC 4 8ED8 controller direct operation of the number of drives of the MPC controller RCD 40A 30 mA circuit breaker optional for MPC 8ED8 Technical data MPC 4 8 ED8 dimensions MPC 4ED8 19 3U D 410 mm without plug in connector MPC 8ED8 19 60 D 410 mm without plug in connector weight 17 6 kg MPC 4ED8 32 7 kg MPC 8ED8 Technical data MRC 4 8 12 16ED8 dimensions MRC 4ED8 135 x 292 x 115 mm WxLxH MRC 8ED8 135 292 x 115 mm WxLxH MRC 12ED8 135 370 115 mm WxLxH MRC 16ED8 240 x 292 x 115 mm WxLxH weight MRC 4 08 2 5 kg MRC 8ED8 2 8 kg MRC 12ED8 3 8 kg MRC 16ED8 4 0 kg without connector cable Versions MPC 4ED8 DC and RC model MPC 4 8 1 adjustable range 1 0 to 1 6 A motor current consumption 0 25 to 0 37 kW motor capacity CEE 16 A 5 pin phase changing plug MPC 4ED8 2 adjustable range 1 6 to 2 5 A motor current consumption 0 37 to 0 75 kW motor capacity CEE 16 A 5 pin phase changing plug MPC 4ED8 3 adjustable range 2 5 to 4 0 A motor current consumption 0 75 to 1 5 kW motor capacity CEE 16 A 5 pin phase changing plug MPC 4ED8 4 adjustable range 4 0 to 6 3 A motor current consumption 1 5 to 2 2 kW motor capacity CEE 32 A 5 pin phase changing plug MPC 4ED8 5 adjustable range 6 3 to 10 A motor current consumption 2 2 to 3 0 kW motor capacity CEE 63 A 5 pin cable plug Versions MPC 8ED8 DC and RC model 4 MPC 8 08 1 adjustable r
16. are adhered to A UVV specialist factory inspection prior to first use for mobile applications as well as the VDE 0701 07092 first inspection are also included The PLUS C chain hoist is recommended for day to day 22 27 BELAT rigging use when building up and dismantling stage con cert and studio sets in the touring business as well as in the theatrical studio mul tifunction hall and trade fair Sectors Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 98 51 88 contact movecat de www movecat de EI TIVELAIT MOVECAT PLUS C 250 4 DC and RC model Chain hoist compliant with igvw SQ P2 08 Plusv Technical equipment Suspension type single eyelet optional motor hook Hook implementation rotating chain hook optional swivel adapter with eyelet hook block for dual chain fall operation Chain falls 1 1 can be upgraded to two Chain guide easy plate Chain bag textile permanently installed Handles 2 robust aluminium handles Motor forced air cooled Connector cable 1 m HOZHN F connector cable with CEE 16A 4 pin plug black DC model 1 m HO7HN F with CEE 16A 4 pin black power and CEE 16A 4 pin yellow remote control RC model Options Accessories Suspension motor hook optional swivel adapter with ring eyelet hook block for dual chain fall operation Hoisting height up to max 60 m 1 chainfall Inter
17. card for LMS dynamic load measuring system Upgrade for operation in accordance with EN 61508 SIL 3 MRC 4EC1 I analogue remote control I Motion digital remote control I Motion Expert T I Motion Basic Show Controller S I Motion NDB 8 12 Network Distribution Box Transport case DD 3U Copyright 2014 THINK ABELE GmbH amp KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 0170 32 9851 0 49 0170 32 98 51 99 contact movecat de www movecat de EI TDGELSATT V MOTION E 15 30 40 55 75 MOVECAT V MOTION 15 30 40 55 75 Variable Motion Powerpack compliant with BGV C1 and EN 61508 SIL 1 to SIL 3 depending upon configuration V Motion E Variable Motion Powerpacks with integra ted special line and motor filters are designed for ope ration in connection with the Movecat V series of drives In this configuration they allow the V Motion unit to be removed to a distance of up to 50 70 metres C1 V MOTION amp QE P 30 EN 61800 3 from the drive whilst complying at the same time with the EMC and VDE guidelines The combination of integrated motor radio and line filter reduces to a considerable degree the leakage current that for technical reasons is endemic to controlled drives and allows reliable operation with RCD Type B 30 mA earth leakage circuit brea kers It therefore allows the realization of centralized and decentralized intelligent and safe variable speed kine
18. hoist can climb and retract inde pendently drawing its power from the case PLUSlite 1000 4 chain hoists in accordance with igvw SQ D8 Plus DIN 56950 1 2012 5 allow set ting up dismantling and installation operations wit hout the secondary safety component required for D8 applications The PLUSlite 1000 4 hoists are supplied as standard with hoisting capacities of 18 or 24 metres a single hole suspension eyelet two robust handles a permanent ly installed textile chain bag screwed cable glands with 360 anti kink protection DC versions with an HO RN F connector cable with a black CEE 4 pin plug and HC ver sions with a black CEE 4 pin Direct control 400 V AC or remote control 24 V DC DC brakes 2 Overload protection by means of pat friction clutch permanent form closure in the load line High quality specially hardened transmission plug for power and a yellow CEE 4 pin plug for remote control The PLUSIite 1000 4 is available in both DC direct control 400 V and HC remote control low voltage 24 V DC versions and is CE compliant tested and ready for operation at the time of delivery The chain hoist is designed for operation with Movecat phase changing controllers in accordance with DIN 60204 32 and EN 13849 1 and when used accordingly is cer tified as CE compliant pro vided the instructions set out in the user manual are adhered to A UVV specialist fac
19. in theatres and studios as well as conference trade fair and multi function halls clubs trade fair booths shows and events Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 0170 32 98 51 0 49 0170 32 98 51 88 contact movecat de www movecat de MOVECAT OMK fixed speed chain hoists compliant with BGV C1 and DIN 56950 EI TDVELSATT TECHNICAL DATA OMK 500 4 OMK 500 8 OMK 800 4 OMK 800 8 OMK 1000 4 SWL upgradable to 2 chainfalls 500 kg 500 kg 800 kg 800 kg 1000 kg 3 11000 kg 1 1000 kg 1 1600 kg 11600 kg Hoisting speed at 50 Hz c 4 m min 8 m min 4 m min 8 m min 4 m min 12 m min 14 m min C12 m min 14 m min Number of chainfalls bred 1022 A ea 1 ea 1 Motor power 0 84 kW 0 84 kW 2 20 kW 3 00 kW 2 20 kW Duty cycle Starts per hour 40 240 40 240 40 240 40 240 40 240 Load chain acc DIN 5684 8 7x22 mm 7x22 mm 9x27 mm 9x27 mm 9x27 mm Weight without chain 41 kg 41 kg 80 kg 80 kg 80 kg Chain weight m 1 10 kg 1 10 kg 1 80 kg 1 80 kg 1 80 kg Dimensions LxWxH w o chain hook 512x361x311 512x361x311 569x480x360 569x480x360 569x480x360 TECHNICAL DATA OMK 1250 4 OMK 1250 8 SWL 1 upgradable to 2 chainfalls 1250 kg 1250 kg 12500 kg 12500 kg Hoisting speed at 50 Hz c 4 m min 8 m min 12 m min 14 m min Number of chainfalls 1 2 1 2 Motor power 3 00 kW 3 00 kW Duty cycle Starts per hour 40 240 40 240 Load chain acc DI
20. optional swivel adapter with eyelet and hook block for dual chain fall operation 1 2 be upgraded to two easy plate textile permanently installed 2 robust aluminium handles forced air cooled 1 m HO7HN F connector cable with 16 4 pin plug black DC model 1 m HO7HN F with CEE 16A 4 pin black power and CEE 16A 4 pin yellow remote control RC model Options Accessories Suspension Hoisting Internal control Connector cable Limit switching Load sensing Running gear Controllers DC Controllers RC Miscellaneous Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 9851 0 4910170 32 98 51 99 contact movecat de www movecat de motor hook optional swivel adapter with ring eyelet hook block for dual chain fall operation height up to max 60 m 1 chainfall x kit for the internal evaluation of a e track geared limit switch in DC operation Multicorecable with 6 pin multipin connector RC models geared limit switch for RC and DC incremental encoder 3 absolute encoder 3 dynamic LME LMS system 3 strain gauge principle with x kit or l controller 3 with l controller and additional equipment hand and electric 108 ED8 LD8 TD8 series and MRC DC series MPC ID8 ED8 LD8 RC series transport case rain cover MOVECAT PLUS C 250 4 DC and RC model Chain hoi
21. reference run for calibration way synchronous group run permitted tolerance of the individual hoists and groups programmable group synchronous run central up down movement of previously selected hoists target runs on position complementary overload ascertainment through evaluati on of the nominal speed when encoder operated simple set up possibility for underload and overload defi nition analysis targeted service runs in connection with by pass switch retention of all parameters even in the event of power failure error warning by means of the display integration into the I Motion network buss system configured via external PC with 100 Mbit network card optional functions depend upon the controller and drive configuration Options Accessories HP version 4 x 2 kW or 4 x 4 kW motor power plug in card for incremental encoder plug in card for dynamic load measuring system MRC D8 series remote control I Motion Controller series transport case Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 9851 0 4910 7032 98 51 99 contact movecat de www movecat de MOVECAT MPC 4IC1 Motion Power Controller compliant with BGV C1 EN 61508 a SIL 1 to SIL 3 The Motion Power Controller 4 IC1 represents an intelli gent control unit in a 19 metal housing for the OMK and VMK hoists from Movecat according to BGV C1 Tha
22. 12 1 000 kg rated load according to D8 with safety factor 6 LMS M 1500 3000 1 500 kg rated load according to D8 Plus and C1 with safety factor 12 3 000 kg rated load according to D8 with safety factor 6 Functions depend upon the actual controller configuration Technical equipment Robust aluminium housing with two rotatable highly robust eyelets and two securing cotter pins a Lateral cable outlet with metal kink protection Housing in anodized aluminium ring eyelets painted silver available optionally in all matt black Options Accessories a LMS LRC1 1 channel manual controller with computer interface LMS LC4 8B 4 8 channel controller 19 with integrated Movecat D8 M Link system and outputs for ancillary functions such as warning lights alarms etc a 4108 4IC1 controllers with LMS input card Silver finish and special colours upon enquiry Transport case for four or eight devices 12 24 BELAT MOVECAT LMS M Mobile Load Measuring System compliant with BGV D8 and C1 as well as igvw SQ P2 D8 Plus and EN 61508 SIL 1 to SIL 3 depending upon configuration Technical data Measuring range O to 150 of BGV D8 nominal load Overload max 150 of the BGV D8 rated load Collapse load calc 60096 of the 08 rated load 1 200 of the C1 rated load Calibration tolerance 1 0 of FS Non linearity 0 5 of FS Hysteresis lt 0 3 of FS Temp error 0 04 of FS K
23. 4 m min 1 2 1 2 2 20 kW 3 00 kW 40 150 25 150 9x27 mre 9x27 mm 113 kg 113 kg 132 kg 132 kg 506x435x531 506x435x531 EI TDVGELSTT PLUSlite 500 4 500 kg 11000 kg 4 m min 2 m min 1 ea 0 75 kW 25 150 7x22 mm 51 kg 61 kg 374x2 75x234 PLUSlite 1250 4 1250 kg 12500 kg 4 m min 2 m min 1 2 20 kW 25 150 11x31 mm 145 kg 168 kg 643x435x490 Options Accessories Suspension Hoisting Speeds Internal control Connector cable Limit switching Load sensing Running gear Controllers DC Controllers RC Miscellaneous motor hook optional swivel adapter with ring eyelet hook block for dual chain fall operation height up to max 60 m 1 chainfall 2 depends on model and control system x kit for the internal evaluation of a e track geared limit switch in DC operation Multicorecable with 6 pin multipin connector RC models geared limit switch for RC and DC incremental encoder absolute encoder dynamic LME LMS system 3 strain gauge principle 2 with x kit or I controller 9 with l controller and additional equipment hand and electric MPC 108 ED8 108 series and MRC DC series MPC 108 ED8 LD8 RC series transport case rain cover PLUSlite 500 8 500 kg 15000 kg 8 m min 4 m min ee 2 20 kw 25 150 7x22 mm 51 kg 61 kg 374x2 75x234 PLUSlite 1250 8 1250 kg 12500 kg
24. 851 0 49 01 70 32 98 51 99 contact movecat de www movecat de MOVECAT LMS M Mobile Load Measuring System compliant with 08 and as well as igvw SQ D8 Plus EN 61508 SIL 1 to SIL 3 depending upon configuration The Movecat LMS M load measuring system was deve loped to accompany the D8 D8 Plus and C1 chain hoists and pre rigging applications It will prove useful whenever it is necessary to measu re and monitor the effec tive load on chain hoists and suspension points or other drives and load points As a versatile ancillary tool it can simply be hung at any point in the load or transmission line where it ascertains in real time fully dynamically the effective tractive forces and transmits this information to the controller unit for evalu ation and further processing The LMS system works on the strain gauge principle of force measurement along the longitudinal axis The strain gauge DMS is protected by an aluminium tube sealed with a highly ela stic compound from mecha nical and other damage The system is designed to satisfy the most stringent safety requirements attaining duri ng BGV D8 applications a safety factor of 6 and during igvw SQ P2 D8 Plus as well as BGV C1 applications a safety factor of 12 In the light of these data the need for an additional secondary safety system for 08 Plus and C1 applications is obvi ated The area of use has been conceived
25. AOFC 1 Motion Network NDC C14FC input socket O inputs and outputs SUB D25 female Max 2 kW per drive HP version available with 4 kW each Dimensions 19 3U D 470 mm without plug in connector Weight 17 5 kg BGV C1 conformity up to EN 61508 SIL optional depending upon configuration 12 2 70ELZ777 depending upon configuration Management of free and closed drive groups Target runs on position Target synchronous group run Group synchronous run central up down movement of previously selected hoists Input of software operating limit positions for raising and lowering Simple encoder reference run for calibration oimple setup possibility for underload and overload definition Complementary overload ascertainment through evaluati on of the nominal speed when encoder operated Bypass function for underload and overload conditions Bypass function for auxiliary run from emergency stop point Testing equipment for limit switch positions in accor dance with DIN 56950 Memory function for the entire setup including all opera ting parameters even in the event of power failure Error warning by means of the display Integration into l Motion network buss system remote or local operation selection Some functions depend upon the actual controller drive configuration Options Accessories Plug in card for incremental encoder Plug in card for SSI absolute encoder Plug in
26. E 0113 conformity BGV D8 und igvw SQ P2 D8 Plus conformity Options Accessories rear panel with HAN 16 E multi contact connector instead of four CEE 4 pin connectors 4 8LD8 DC transport case Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 9851 0 F 4910 7032 98 51 99 contact movecat de www movecat de MPC MRC 4 8 12 16ED8 MOVECAT MPC 4 8ED8 Motion Power and MRC 4 8 12 16 08 remote controllers DC and RC model Compliant with BGV 08 and igvw SQ 08 Plus e P UT ipp P xa DIPIIUELHIE ia The Motion Power and Motion Hemote Controllers of the E series in direct con trol 400 V AC or remote control 24 V DC version have for years represented the defacto industry standard in the field of asynchronous BGV D8 and igvw SQ Pe D8 Plus 400 V AC rotary cur rent drives and in particular chain hoists such as those of Movecat s Eco Plus Compact Ecolite Pluslite and Plus C series The robust respectively 3U or GU MPC metal housings contain all the contactor switches safety circuits under voltage phase and rotary field supervision cir cuitry and main control swit ches required for operation as well as for each channel FEATURES 4 8ED8 Simple intuitive operation nn ZZE Coes C an individually adjustable mo tor protection switch The operation is performed from a detac
27. GV C1 EN 61508 SIL 1 to SIL 3 ap plications with the most exacting kinetic and safety technical requirements in studio theatre events and tour use Backlit LCD display of operating parameters E Stop button function illuminated Four function keys for menu control Function switch for central start up remote local bypass Up and down buttons optionally as a key switch as well as a speed control for manual installation backup operation a Incremental encoder input dual channel high resolution Absolute encoder input SSI high resolution Motion network input network address software determinable ree digital inputs for ancillary functions FC data input for frequency converter parametri sation Force cooling by means of a temperature controlled noiseless fan Robust metal housing with four handles Three M 12 rigging options for couplers when truss mounted Mounting bracket for safety cable optional or via I Motion network controller Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 88 51 88 contact movecat de www movecat de V MOTION 15 30 40 55 75 MOVECAT V MOTION 15 30 40 55 75 Variable compliant with BGV C1 and EN 61508 SIL 1 to SIL 3 depending upon configuration FEATURES Standard configuration according to BGV C1 Optionally upgrada
28. N 5684 8 11x31 mm 11x31 mm Weight without chain 95 kg 95 kg Chain weight m 2 70 kg 2 70 kg Dimensions LxWxH w o chain hook mm 599x486x382 599x486x382 3 DIN 56950 1 2012 05 Chain safety factor dyn 8 Options Accessories Suspension motor hook swivel adapter with eyelet and hook block for dual chainfall operation Hoisting height up to 60 m 1 chainfall Speeds 2 depending on model and controller Connector cable hybrid multi core cable with 8 24 pole multi pin plug Limit switching 2 channel incremental high resolution absolute encoder 2 29 bit resolution dynamic LME LMS real time load measuring system Load sensing strain gauge principle Motor protection protections against thermal overload self resetting Running gear manual and electric trolleys MPC EC1 or IC1 series carrier handles climbing hoist kit transport case rain cover 2 Controller and additional equipment Controllers Miscellaneous Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 0170 2 9851 0 49 01 70 32 9851 99 contact movecat de www movecat de MOVECAT VMK L chain hoists for variable and fixed speeds in accordance with BGV C1 and DIN 56950 The VMK L hoists according to BGV C1 are notable for their innovative feature set and unusually flexible hand ling whilst satisfying at all times the highest standards of safety Particularl
29. Show Controller compliant with BGV D8 and C1 as well as igvw SQ P2 D8 Plus and EN 61508 SIL 1 to SIL 3 depending upon configuration The I Motion Basic control ler constitutes a compact System Controller for the systemic control of kinetic drives mobile and flexible project applications Developed for applications with up to 60 drives it allows the control and super vision of any application in connection with D8 D8 Plus and C1 drives even in any desired mixed operation at fixed or variable speeds Depending upon the drives Technical equipment and controllers used entire systems can be realized in accordance with EN 61508 from SIL 1 to SIL 3 The option exists of integrating already existing drives and other stage machinery The controller corresponds in its basic configuration to BGV D8 and BGV C1 for instal lation work it can optionally be upgraded for applications up to SIL 3 and therefore for overhead scenic runs The Basic controller controls and a 12 AC LCD touchscreen backlit Keypad for direct input E Stop button function illuminated Key switch for central start up with bypass function High resolution rotary encoder with button function GO button Start backlit SSD disk drive Internal UPS 3 minutes with network filter 2 Motion Net output sockets USB ports for add mouse M stick etc Robust 19 BU metal housing with two handles Supervises by 1
30. Width x Height x Depth closed incl castors Conforms with EN 60204 32 EN 13849 1 VDE 0113 BGV D8 and igvw SQ Pe D8 Plus Options Accessories DMB permission switch a LP version with 0 37 to 1 0 kW motor capacity upon request HP version with 1 5 to 3 0 kW motor capacity upon request EU Socapex compatible plug in connector Versions 16TD8 RS3 16 channel with rocker switch adjustable range 2 5 to 4 0 A motor current consumption 0 75 to 1 5 kW motor capacity MPC 24TD8 RS3 24 channel with rocker switch adjustable range 2 5 to 4 0 A motor current consumption 0 75 to 1 5 kW motor capacity MPC 32TD8 RS3 32 channel with rocker switch adjustable range 2 5 to 4 0 A motor current consumption 0 75 to 1 5 kW motor capacity MPC 16TD8 TS3 16 channel with rotary switch adjustable range 2 5 to 4 0 A motor current consumption 0 75 to 1 5 kW motor capacity MPC 24TD8 TS3 24 channel with rotary switch adjustable range 2 5 to 4 0 A motor current consumption 0 75 to 1 5 kW motor capacity MPC 32TD8 TS3 32 channel with rotary switch adjustable range 2 5 to 4 0 A motor current consumption 0 75 to 1 5 kW motor capacity Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 98 51 88 contact movecat de www movecat de 4108 4108 Motion Power Controller DC and model compliant with
31. XLR FX6 M Link system incl shut off dummy connector drive output connector HAN E16 16 pin at DC models and 24 pin at RC models every four motor outputs optional 19 pin EU Socapex compatible plug in connector DC models MRC input connector 36 modular Motion Network NDC C14FC input connector A encoder input SUB D25 male O inputs and outputs SUB D25 female load measurement system input SUB D15 female max 1 kW per drive HP versions according to choice with 2 or 4 kW dimensions 19 3U D 470 mm without plug in connector weight 16 4 kg 16 6 kg HP version complies with BGV 08 and D8 Plus in accordance with igvw SQ P2 adaptable to the prevailing functional and safety require ments has been realized The MPC 4ID8 is system compatible with the existing MPC 4ED8 controllers and can be operated by means of the established Movecat Link system both within a group and also with the well known controllers Furthermore it is ready for I Motion network operation and up to 8 devices can be operated in direct link mo de or up to 60 devices via I Motion network in decen tralized group mode in combi nation with a central control ler e g a controller from the I Motion series 12 247 BELAT The clearly identifiable input buttons in combination with a rotary push button encoder permit the simple and intui tive configuration and hand ling of the control
32. and execution of complex successive show sequences Acceleration and braking of drives groups and cues oupervision of the run direction and target speeds and complementary overload ascertainment through analysis of the rated speed when encoder operated Set up possibility for underload overload definition Driver s log function allows display and export Import export of show files on server and USB memory stick Off line operation The functions listed depend upon the actual hoist drive configuration Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 88 51 88 contact movecat de www movecat de I MOTION BASIC S MOVECAT I Motion Basic S Show Controller compliant with 08 and as well as igvw SQ D8 Plus EN 61508 SIL 1 to SIL 3 depending upon configuration The I Motion Basic S Show Controller is based on the tried and tested Basic con troller and constitutes a compact System Controller for the systemic control of kinetic drives in mobile and flexible project applications with extended ancillary fea tures The additional features are the general dual channel implementation according to EN 61508 SIL 3 the User ID chip card function as well Technical equipment as additional outputs for the connection of an additional monitor and external remote units for GO Emergency Off and a control le
33. ange 1 0 to 1 6 A motor current consumption 0 25 to O 37 kW motor capacity CEE 16 A 5 pin phase changing plug MPC 8ED8 2 adjustable range 1 6 to 2 5 A motor current consumption 0 37 to 0 75 kW motor capacity CEE 16 A 5 pin phase changing plug 4 MPC 8ED8 3 adjustable range 2 5 to 4 0 A motor current consumption 0 75 to 1 5 kW motor capacity CEE 32 A 5 pin phase changing plug 4 MPC 8ED8 4 adjustable range 4 0 to 6 3 A motor current consumption 1 5 to 2 2 kW motor capacity CEE 63 A 5 pin cable plug Technical equipment MRC 4 8 12 16ED8 emergency OFF button self latching function illuminated a rotary switch 1 4 1 8 1 12 or 1 16 for direct selection of the run direction illuminated GO button Heady indicator for the M Link sys tem robust metal housing side plates and two stainless steel handles safety grips 10 m connector cable with multi pin plug in connector operating voltage 24 V AC Options Accessories RCD circuit breaker 40 63 A 30 mA for 8ED8 19 pin EU Socapex compatible plug in connector MRC 8 12 16 cable spitting adapter transport case Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 88 51 88 contact movecat de www movecat de 16 24 32TD amp MOVECAT MPC 16 24 32TD8 Motion Power Controller compliant with BGV 08 and igvw SQ P2 D8 Plus
34. annel incremental encoder high res i dis Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 7032 8851 0 49 0170 32 88 51 88 contact movecat de www movecat de MOVECAT VMW S 125 3 Entertainment Winch compliance with BGV C1 DIN 56950 and EN 61508 SIL 3 Movecat VMK S 125 3 the first device in a new winch series for universal applica tions in the entertainment touring and events indus tries The VMW S 125 3 has been tested in accordance with BGV C1 DIN 56950 and BGG 912 and approved for use over human heads and in manned airframes as well as conforming to EN 61508 SIL 3 It transports up to 125 kg at speeds continuously variable from O to 3 metres per second The winch achieves accelera tion values up to an astoun ding 3 m sec The hoisting height is up to 24 metres Technical data Safe working load 125 kg Hoisting speed 3 m sec Acceleration max 3 m sec Hoisting height 24 Rope 5 mm Motor power 5 5 kW Duty cycle 40 Brakes 2 Basics The VMW S winch series scores with an extremely compact format and is capa ble of operating in a wide variety of different setting up and mounting configurations It has a round tube frame structure in the 520 mm grid and is mount compatible with GP and ST 52 trus ses Maintenance free or else ultra low maintenance mechanical and functional elements assure problem
35. ave been optimized for particularly quiet operation These are in detail the acoustically insulated container and the narrowly calibrated parts and chains In conjunction with V Motion Powerpacks VMK S hoists can be controlled at variable speeds for way and time syn chronous runs or else directly hoists up to 10 m min at 50 Hz with the MPC 4IC1 controllers at a fixed speed These high speed hoists from 10 m min in combination with a V Motion Powerpack are capable of speeds ranging from O to 40 m min whilst functioning as a closed loop 12 27 P0ELZ7F system with full torque even during runs continuing beyond the null point Gfloating state and reversal of direction wit hout incursion of the brakes For optimal handling ease the hoists are equipped with two robust handles For the secure attachment of moving loads rotatable and tiltable single hole eyelets are used VMK S hoists are equipped with an internal status and test board This illuminates the relevant operational states and implements the testing systems required by DIN 56950 for the operating and emergency limit switches load measuring system and brakes With their remarkable features VMK S hoists repre sent the elite class on the world market and are recom mended for all state of the art applications in locations such as in TV studios theatres and events venues deman ding maximum performance and safety combined with the widest possible ba
36. ble with dual CPU to EN 61508 SIL 3 Controls a V series drive with variable speed Self testing of relevant functions prior to system enabling Closed loop system allows runs continuing beyond the null point with full torque floating state as well as reversal of direction without incursion of the brakes Monitoring and display of operating states and self moni toring safety relay as well as dynamic load analysis Load and hoist group transcendent error monitoring and analysis in l Motion network operation Simple intuitive operation Target and time runs on position Way and time synchronous group run permitted tole rance of individual hoists and groups programmable Technical data Input 16 A CEE 400 V 5 PH Output 16 A CEE 400 V 5 PH for Link operation with other V Motion devices depending upon the rated power in the case of V Motion 15 30 and 40 Multipin C8 24 FC output connector MPC 4IC1 compatible NDC C14 FC input connector for I Motion network XLR 4pin female input connector 1 0 operation XLHR 3pin female plug in connector FC data Drive power V Motion 15 to 1 5 kW V Motion 30 to 3 0 kW V Motion 40 to 4 0 kW V Motion 55 to 5 5 kW V Motion 75 to 7 5 kW Motor power asynchronous three phase drive with 12 kHz pulse frequency Dimensions W x D x H 435 x 455 x 1834 mm V Motion 15 30 40 435 x 455 x 222 mm V Motion 55 75 22 247 0ELZL Motion Powerpack Group synchronous run centra
37. ces with RCD Type B 30 mA safety switches Controls a V series drive with variable speed Self testing of relevant functions prior to system enabling Closed loop system allows runs continuing beyond the null point floating state with full torque as well as reversal of direction without incursion of the brakes Monitoring and display of operating states and self moni toring safety relay as well as dynamic load analysis Load and hoist group transcendent error monitoring and analysis in l Motion network operation Simple intuitive operation Target and time runs on position Technical data Input 16 A CEE 400 V 5 ph Output 16 A CEE 400 V 5 PH for Link operation with other V Motion devices depending upon the rated power in the case of V Motion 15 30 and 40 Multi pin C8 24 FC output connector MPC 4IC1 compatible NDC C14 FC input connector for I Motion network XLR 4pin female input connector Digin operation XLHR 3pin female plug in connector FC data Drive power V Motion E 15 up to 1 5 kW V Motion E 30 up to 3 0 kW V Motion E 40 up to 4 0 kW V Motion E 55 up to 5 5 kW V Motion E 75 up to 7 5 kW Motor capacity asynchronous three phase drive with 12 kHz pulse frequency Dimensions W x D x H 435 x 455 x 134 mm V Motion E 15 30 40 435 x 455 x 222 mm V Motion E 55 75 Way and time synchronous group run permitted tole rance of individual hoists and groups programmable Group synchronous run c
38. chain 455 x 240 x 170 mm 29 9 kg 31 9 kg CE compliant tested and ready for operation at the time of delivery The chain hoist is designed for operation with Movecat phase changing controllers in accordance with DIN 60204 32 and EN 13849 1 and when used accordingly is certified as CE compliant provided the instructions set out in the user manual are adhered to A UVV specialist factory inspection prior to first use for mobile applications as well as the VDE 0701 0702 first inspection are also in cluded The chain hoists of the Compact series are recom mended for daily rigging use when setting up and dis mantling stage concert and studio sets in the touring sector as well as in thea tres studios multi function halls and trade fair cen tres everywhere in fact where heavy loads need to EI TDVELTTT be borne by lifting gear that is itself light and where safe solutions are required for professional applications Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 98 51 99 contact movecat de www movecat de COMPACT 500 4 IITU DELAT MOVECAT COMPACT 500 4 chain hoist DC and RC model compliant with BGV D8 Technical equipment Suspension type Hook implementation Chain falls Chain guide Chain bag Handles Motor Connector cable single eyelet optional motor hook rotating chain hook
39. cordance with the guidelines set out in BGV D8 and igvw SQ Pe D8 Plus The MPC 4LD8 controller is recommended for use with the Eco Ecolite Compact Plus Plus C and Pluslite hoists for small professio nal rigging applications in the trade fair events studio and touring sectors controls and supervises two to eight hoists such as Eco Ecolite Compact Plus Plus C and Pluslite or else asynchronous three phase drives 400 V 50 Hz EI TDOELTTT direct control 400 V or remote control 24 V DC EN 60204 32 EN 13849 1 and VDE 0113 conformity implementation according to 08 and igvw SQ 08 Plus simple intuitive operation self testing of relevant functions prior to system enabling Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 9851 0 F 4910 7032 98 51 99 contact movecat de www movecat de MPC 2 4 6 8LD8 EI TDOELTTT MOVECAT MPC 2 4 6 8LD8 Motion Power Controller DC and RC model compliant with BGV D8 and igvw SQ P2 D8 Plus DC Versions MPC 2 4 6 8LD8 1 adjustment range 1 0 to 1 6 A motor current consumption 0 25 to 0 37 kW motor power MPC 2 4 6 8LD8 2 adjustment range 1 6 to 2 5 A motor current consumption 0 37 to 0 75 kW motor power MPC 2 4 6 8LD8 3 adjustment range 2 5 to 4 0 A motor current consumption 0 75 to 1 5 kW motor power MPC 2 4LD8 4 adjustment range 4 0 to 6 3 A motor current co
40. ctor stick correct run direction link system position operating and emergency limit temperature as well as dynamic load analysis supervision of the run direction and target speed when encoder operated selection of possible Movecat drive parameters from stored database Technical equipment backlit LCD backlit buttons and encoders LED status display of the device four adjustable motor protection switches E Stop button function illuminated GO button backlit enabling main switch for central start up incl by pass function function keys 1 4 for simple intuitive handling and direct selection of drives as well as their run directions high resolution rotary encoder with button function for data input incremental encoder input dual channel with run direction detection high resolution load measurement cell input LMS LME eight digital inputs and four outputs for ancillary functions e g limit switch Motion network input network address software determinable robust metal housing with two handles EI TDVELTTT MOVECAT MPC 4108 Motion Power Controller DC and RC model compliant with BGV 08 and igvw SQ P2 D8 Plus management of drive groups group transcending error supervision in M Link mode up to 8 and in l Motion network up to 60 MPC 4108 controllers input of software operating limit positions for raising and lowerings simple encoder
41. d by a selec tive bypass system whereby in the event of a failure in a single module in the power station or in the MRC it remains possible to operate the modules and drives not affected The safety concept is com plemented by the tried and tested Movecat M Link system which allows up to twelve TD8 racks max 384 EI TDVOELTTT drives to be operated in a network The M Link is system compatible with the Movecat 4108 and 4 8ED8 controllers Up to eight devices can be linked with a single TD8 controller Even linked mixed operation can be realized with up to eight devices Due to their intuitive opera ting philosophy and also to their handling and safety fea tures the racks of the TD8 series are recommended in particular for larger inter dependent rigging systems with more extensive safety requirements in professional rigging applications in accor dance with BGV D8 and igvw SQ Pe D8 Plus controls up to 16 MPC 16TD8 24 MPC 24TD8 MPC 32TD8 direct control hoists such as Movecat Eco Ecolite Compact Plus Plus C or Pluslite chain hoists or else asynchronous three phase drives 400 V 50Hz Self testing of relevant functions prior to system enabling Supervision and display of operating states such as operating voltage and phase motor protection switch run direction and main contactor on stick M Link system DMB system illumination of input devices and important opera
42. ed and tested in the Movecat V series a status board displaying the most important function parameters is also integra ted along with DIN 56950 test functions for the sepa rate testing of the brakes and limit switch functions Both brakes are equipped with a manual release lever for the controlled lowering of suspended loads in emergen cy operation The VMW S 125 3 in con junction with V Motion 75 can be integrated into the I Motion network Metal tube frame made of 48 3 mm steel tubing Complementary coupler receptacle for 30s trusses Movecat C8 24 plug in connector with 1 5m PMC HV connector cable BGV C1 DIN 56950 and EN 61508 SIL compliant Preliminary final and handover inspection in accordance with BGG 912 Options Accessories with contact free monitoring and emergency ventilation function Absolute encoder 1 29 bit Noise absorbing plastic cladding elements Incremental encoder 1 Swivel adaptor Protection against thermal overload 1 self resetting Cables with a variety of receptacles and lengths Geared limit switch tracks 4 independent with visualization Transport trolley Load measuring system DMS with test function Transport case Dimensions 1050 x 518 3 x 628 Length x Width x Height Transport cover Weight 203 kg V Motion 75 Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen A8I017032 9
43. ending upon the system configuration to the immedi ate shutting down of a hoist drive the group to which it belongs or even the entire system The safe efficient and intui tive control of key operating and run parameters is facili tated by an application opti mized backlit input keyboard with tactile feedback and a multifunctional 3D control knob It is further enhanced by a flippable 19 touchscreen The touchscreen takes over the visual representation of the operating input and system parameters in a choice of 2D or 3D dis plays whether horizontally or vertically oriented The user has at all times there fore an overview of the rig and instant access to para meters and details Complex target and group runs even in the case of possible inter actions can be programmed and executed depending upon the drive configuration For direct operation two dynamic control levers are available as well as five CUE Start buttons for the recall and execution of scene changes and shows An integrated SSD disk drive as storage medium allows the storage of all system parameters and numerous shows the actual number depends upon the size of the hard disk The data can be exported and stored exter nally EI TDVELTTT The I Motion Expert T Il sys tem is recommended in com bination with the I Motion and V Motion Power Controllers in particular for professional complex as well as scenic kinetic application
44. ened transmission climbers or in the standard installation position and most models can be conver ted to dual chainfall operation to increase their safe wor king loads ECOlite hoists are supplied as standard with 18 m or 24 m hoisting capacity a single hole suspension eyelet two robust handels a permanently installed textile chain bag screwed cable glands with 360 anti kink protection DC versions with an HO RN F connector cable with a black CEE 4 pin plug and HC ver sions with a black CEE 4 pin plug for power and a yellow CEE 4 pin plug for remote control The hoists are available in both DC direct control 400 V AC and RC remote control low voltage 24 V DO versi ons and are CE compliant tested and ready for opera tion at the time of delivery precision milled specially hardened chain bag wheel with min 5 chain pockets highly robust round steel link chain acc DIN 5684 basicplate chain guide single hole eyelet alternatively motor hook rotating chain hook 22 27 BELAT permanently installed fold away textile chain bag robust light alloy cast housing closed on all sides ECO 250 with plastic covers with two handles black low reflective finish RAL 9005 compact light construction smooth quiet operation convertible to dual chainfall operation except ECOlite 320 use in climbing or standard positions possible without conversion 1 m HO7HN F connector cable with CEE 16 A 4
45. entral up down movement of previously selected hoists realisable with multiple run groups ooftware operation limit positions for raising and lowe ring oimple position reference run for calibration Simple setup possibility for underload and overload defi nition Targeted service runs beyond the null point in connection with bypass switch Testing equipment for all limit switch positions in accor dance with DIN 56950 Memory function for the entire setup including all opera ting parameters even in the event of power failure Integration into the network system Choice of remote or local operation Configured via external PC with 100 Mbit network card Administrator series C optional or via 1 network controller Weight V Motion E 15 V Motion E 30 V Motion E 40 V Motion E 55 18 8 kg V Motion E 75 19 8 kg BGV C1 conformity up to SIL 3 EN 61508 optional depending upon configuration 16 0 kg 16 8 kg 17 0 kg Options Accessories Upgrade for operation in accordance with EN 61508 SIL 3 19 rack mounting kit I Motion V Motion MRC Remote Controller I Motion NDB 6 12 Network Distribution Box I Motion NMB 14 Network Master Box Truss coupler and safety rope Transport case Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 9851 0 F 4910 7032 98 51 99 contact movecat de www movecat de V MOTION 15 30
46. erating and run parame ters is facilitated by a user optimized input keyboard with tactile feedback and a high resolution rotary enco der with a button function A large 12 backlit 4C LCD touchscreen provides further input and takes over the visu al display of the operating input and system parame ters in 2D or 3D according to choice The user therefore has an overview over the entire rig and instant access to parameters and details Complex target and group runs even in the case of possible interactions can be EI TDVELTTT programmed and executed depending upon the drive configuration The Basic con troller is system and soft ware compatible with the I Motion Expert controllers and can be used as a backup system For the immediate triggering of kinetic run activities a GO button and a rotary push button encoder are available for the recall and execution of scene changes and shows as well as adjustment of their speeds An integrated SSD disk drive as storage medium allows the saving of all system parameters and numerous shows the actu al number depends upon the size of the hard disk The data can be exported and stored externally The l Motion Basic Show Controller is recommen ded in combination with the MPC and V Motion Power Controllers for professional kinetic applications in the rig ging trade fair events stu dio and touring sectors 98 51 99 contact movecat de www movecat de
47. h a safety factor of 10 as well as a high quality transmission and two efficient DC brakes in combination with a patented overload device are stan dard features of this series The Basicplate chain guide ensures reliable chain trans mission and reduces the risk of the chain jamming The hoists are exceptionally light Basic configuration 18 24 m hoisting height direct control 400 V AC or remote control 24 V DC DC brake 2 basicplate chain guide rotating chain hook with two handles smooth quiet operation as well as compact and are recommended in particular for applications where space is limited All hoists can be used wit hout conversion either as climbers or in the standard installation position and most models can be conver ted to dual chainfall opera tion to increase their safe working loads The PLUSlite chain hoists according to SQ 08 Plus allow setting up and dismantling as well as installation operations without any need for the otherwise requisite seconda safety component or the time consuming dead hang of the system that would otherwise be required for D8 applications PLUSlite hoists are sup plied as standard with hois ting capacities of 18 or 24 metres respectively a single hole suspension eyelet two robust handles a permanently installed tex tile chain bag screwed cable glands with 360 anti kink overload protection by means of pat friction clutch
48. hed remote unit belonging to the MRC ED8 series for 4 8 12 or 16 drives The E Controller system forms the foundation for Movecat s M Link system by means of which up to eight MPC controllers forming an integrated network can be centrally controlled and supervised The integrated safety elements are arran ged sequentially to form a safety chain so that any operating failure such as the tripping of a motor protection Switch leads automatically to all the drives connected via M Link coming to a stop Furthermore the runs of all A linked MPC controllers can be activated centrally even if a variety of MRC units are being used The operating status is indicated by LED signal elements on the front panel The controllers comply with the EN 60204 32 and EN 13849 1 standards as well as VDE 0113 and are suita ble for the control of lifting gear in accordance with the guidelines set out in BGV 08 and igvw SQ Pe D8 Plus with which they comply in every respect Typical fields of application include rigging applications in the touring sector and as a setting up aid for profes sional events and trade fair applications controls and supervises in conjunction with MRC remote units up to 4 or 8 hoists respectively including Eco Ecolite Compact Plus Pluslite or Plus C or else asynchronous three phase drives 400 V 50 Hz EI TDOELSTT direct control 400 V AC or remote control 24 V DC conforms w
49. high quality specially hardened transmission single eyelet alternatively motor hook permanently installed fold away textile chain bag black low reflective finish RAL 9005 compact light construction convertible for dual chainfall operation except PLUSlite 160 2 2 47 BELAT protection DC versions with an HO7HN F connector cable with a black CEE 4 pin plug and HC versions with a black CEE 4 pin plug for power and precision milled specially hardened chain bag wheel with min 5 bags highly robust round steel link chain acc DIN 5684 robust light alloy cast housing closed on all sides PLUSlite 125 160 with plastic covers use in climbing or standard positions possible without conversion 1 m HO7HN F connector cable with CEE 16 A 4 pin plug black DC model 1 m HO7HN F with CEE 16 A 4 pin black power and CEE 16 A 4 pin yellow remote control RC model a yellow CEE 4 pin plug for remote control The hoists are available in both DC direct control 400 V AC and RC remote control low voltage 24 V DO versi ons and are CE compliant tested and ready for opera tion at the time of delivery The chain hoists are designed for operation with Movecat phase changing controllers in accordance with DIN 60204 32 and EN 13849 1 and when used accordingly are certified as CE compliant provided the instructions set out in the user manual are adhered to A UVV specialist factory inspection prior to first use f
50. ht with 24 m hoist Dimensions LxWxH w o chain hook mm MOVECAT ECOlite DC and RC model chain hoists compliant with BGV D8 and igvw SQ P2 ECOlite 250 4 ECOlite 320 4 250 kg 320 kg 1500 kg 4 m min 4 m min 2 m min 1 2 1 0 18 kW 0 30 kW 25 150 25 150 4x12 mm 4x15 mm 20 kg 20 kg 23 kg 23 kg 317x196x186 317x196x186 ECOlite 1600 4 ECOlite 1600 8 1600 kg 1600 kg 13200 kg 13200 kg 4 m min 8 m min 2 m min 4 m min ee 1 2 2 20 kW 3 00 kW 40 150 20 150 9x27 mm 9x27 mm 113 kg 113 kg 132 kg 132 kg 506x435x531 506x435x531 I T BELAT ECOlite 1000 4 1000 kg 12000 kg 4 m min 2 m min 1 0 75 kW 25 150 7x22 mm 51 kg 61 kg 374x275x234 ECOlite 2500 4 2500 kg 15000 kg 4 m min 2 m min BEZ 2 20 kW 25 150 11x31 mm 145 kg 168 kg 643x435x490 Options Accessories Suspension Hoisting Speeds Internal control Connector cable Limit switching Load sensing Running gear Controllers DC Controllers RC Miscellaneous motor hook optional swivel adapter with ring eyelet hook block for dual chain fall operation height up to max 60 m 1 chainfall 2 depends on model and control system x kit for the internal evaluation of a e track geared limit switch in DC operation Multicorecable with 6 pin multipin connector RC models geared limit switch for RC and DC incremental encoder absolute encoder 3
51. in such a way that the actual rated load is available as a real suspension load and yet the system can ascertain and evaluate over load conditions up to 15090 Furthermore a test and calibration system has been integrated This assures and examines in connection with a Movecat LMS or control ler the correct functioning of the unit at each start up In the course of the calibra tion process the length of the control cable and any temperature fluctuations are taken into account and com pensated for Cable runs of up to 100 m can be realized without problems A further important advantage of self checking is the fact that the load does not have to be unhooked but is recognized by the system and has no effect whatsoever on the test process Any error in the system is detected by the controller and leads depending upon the controller and its settings to the display and closing down of the drive or the connected load group The current ver sion corresponds to the pro visions of EN 61508 SIL 3 In connection with the Movecat l Series and LMS LRG controllers the load values can be ascertained in real time and shown on the display in kilograms or 2 2 47 BELAT percentages In connection with the I Series controllers underload and overload con ditions can be defined and monitored Overloading of the connected drives suspension points or bearing structures is therefore effectively pre vented For pure load measur
52. ing tasks battery driven 1 channel controller LMS LRC1 is also available as a manual device as well as linkable 4 and 8 devices LMS LC4 8B The LMS systems are equip ped with rotatable high ly robust ring eyelets The LMS M systems are availa ble in versions for rated loads of 250 500 and 1 500 kg according to 08 Plus and C1 or 500 1 000 and 3 000 kg according to D8 The LMS systems are recommended in combination with Movecat controllers for professional rigging applications in the trade fair events theatre studio and touring sectors Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154Nufringen 49101 70 32 9851 0 49101 70 32 98 51 99 contact movecat de www movecat de FEATURES State of the art strain gauge technology strain gauge full bridges measure the length change and lateral extension produced by the traction forces An inte grated amplifier sends the measurement signal to the controller for analysis and further processing Axial force transmission Integrated calibration and test system Self test corresponding to EN 61508 SIL Ready for operation with Movecat LMS and MPC l series controllers LMS M 250 500 250 kg rated load according to D8 Plus and C1 with safety factor 12 500 kg rated load according to D8 with safety factor 6 LMS M 500 1000 500 kg rated load according to D8 Plus and C1 with safety factor
53. ith EN 60204 32 EN 13849 1 VDE 0113 implementation according to BGV D8 and igvw SQ P2 D8 Plus self testing of relevant functions prior to system enabling Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 88 51 88 contact movecat de www movecat de MPC MRC 4 8 12 16ED8 kIT BELAT MOVECAT MPC 4 8ED8 Motion Power and MRC 4 8 12 46ED8 remote controllers DC and RC model Compliant with BGV D8 and igvw SQ P2 D8 Plus Technical equipment MPC 4 8ED8 main control switches lockable four or eight adjustable motor protection switches respec tively under voltage rotary field symmetry and phase supervisi on module phase control and error display LED channel indicator for raising and lowering LED indicator for run enabled GO M Link function for up to eight controllers of the E and T series even in mixed operation robust metal housing with two handles CEE 5 pin phase changing plug with 1 5 m HO7HN F connec tor cable 400 V 3 P 16 A or 32 A CEE with phase changing plug High power devices with 400 V 3 P 63 A cable plug HAN 16 E multi contact plug in connector 16 pin at DC models and 24 pin at RC models every four motor outputs optional 19 pin EU Socapex compatible plug in connector DC models Multipin input connector for MRC devices if desired the 4 8 12 16 MRC remote controllers can be plugged directly into
54. ity for underload overload definition Driver s log function allows display importing and exporting of show files on server and USB memory stick Off line operation The functions listed depend upon the actual hoist drive configuration 9851 0 49 0170 32 98 51 99 contact movecat de www movecat de I MOTION EXPERT T 11 MOVECAT I MOTION EXPERT T System Controller compliant with BGV D8 and C1 as well as igvw SQ P2 D8 Plus and EN 61508 SIL 3 The 1 Expert T l oystem Controller the high end product for the systemic control of kinetic drives in larger and complex projects Developed for applications with up to 240 drives it allows the control and super vision of any application in the field of rigging for examp le in connection with D8 D8 Plus and C1 drives at fixed or variable speeds Control in mixed operation of D8 D8 Plus C1 to SIL 3 drives can be realized without pro blems The option even exists of integrating already exi sting drives and other stage machinery The controller corresponds in its basic configuration to the BGV C1 and EN 61508 513 standards and is there fore equipped for overhead scenic runs The Expert T System Controller controls and Supervises via l Motion net work the Movecat MPC 4108 61 V Motion Power Controller and forms with them a closed safety network An error in one unit iS analysed centrally repre sented visually and leads dep
55. l of two to eight asynchronous three phase drives such as the electric chain hoists of the Movecat Eco Plus Compact Ecolite Plus C and Pluslite series Per controller two to eight hoists or drives can be ope rated directly without any additional controllers or ancillary devices in an ope rationally secure and user FEATURES proof fashion Run direction raising and lowering are selected using robust rotary controls and the run activated using a central GO button All safety elements include a latching Emergency OFF button phase malfunction phase Sequence and low voltage Supervision and four motor protection switches individu ally adjustable to each motor All the safety elements are arranged sequentially to form a safety chain so that an Operating failure leads auto matically to all four drives coming safely to a halt The Operating status is indica ted by means of two signal elements A motor plug in connector CEE 16 A 4 pin or a multi pin connector can be directly inserted at rear The con trollers of the Lite series are all in all simple and intuitive to use in accordance with the plug and lift princi ple Different versions of the MPC LD8 controller in DC or RC versions are availa ble with motors ranging from 0 25 to 3 0 kW in power The controllers comply with the EN 60204 32 and EN 13849 1 standards as well as VDE 0113 and are suita ble for the control of lifting gear in ac
56. l up down movement of previously selected hoists realisable with multiple run groups ooftware operation limit positions for raising and lowe ring Simple position reference run for calibration oimple setup possibility for underload and overload defi nition Targeted service runs beyond the null point in connection with bypass switch Testing equipment for limit switch positions in accor dance with DIN 56950 Memory function for the entire setup including all opera ting parameters even in the event of power failure Integration into the network system Choice of remote or local operation Configured via external PC with 100 Mbit network card Administrator series C optional or via Motion network controller Weight V Motion 15 V Motion 30 V Motion 40 V Motion 55 18 5 kg V Motion 75 19 5 kg BGV C1 conformity optionally up to EN 61508 SIL 3 depending upon configuration 15 5 kg 16 2 kg 16 4 kg Options Accessories Upgrade for operation in accordance with EN 61508 SIL 3 19 rack mounting kit I Motion MRC and l Motion Controller I Motion NDB 6 12 Network Distribution Box I Motion NMB 14 Network Master Box Coupler and safety wire Transport case Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 88 51 88 contact movecat de www movecat de I MOTION BASIC MOVECAT I Motion Basic
57. ler The user is guided by a logical ly structured and intuitive interface with display out put Even target and group runs depending upon the drive configuration can be programmed and executed by this means The MPC 4108 solution is recommended for use with the ECO PLUS and Compact Plus C hoists as well as their respective Lite counter parts series in direct control 400 V or remote control 24 V DC version in particu lar for professional rigging applications in the trade fair events studio and touring Sectors Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 9851 0 4910 70 32 98 51 99 contact movecat de www movecat de MPC 4108 FEATURES implementation according to 08 and 08 Plus in compliance with igvw SQ Pe controls and supervises up to four direct drive hoists such as ECO PLUS Compact Plus C and their Lite implementations or else asynchronous three phase drives direct control 400 V or remote control 24 V DC self testing of relevant functions prior to system enabling night design buttons and input devices as well as LCD illuminated Simple intuitive operation basic functions e g raising and lowering hoists possible without time consuming configuration Supervision and display of operating states such as operating voltage and phase motor protection switch run direction and main conta
58. max 50 mA DVI output for second monitor Proficase Hobust housing with handle Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 88 51 88 contact movecat de www movecat de
59. n Pull out 19 keyboard with trackball Var TFT ancillary monitors a MPC I V Motion Power Controller Motion NDB 6 12 Network Distribution Box 1 Motion NMB 14 Network Master Motion NBB Network Booster Box EI TDVELTTT Software Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 Operating system Win XP Pro Software Movecat l Motion Management of up to 60 drives or network control lers with IP address standard configuration 24 drives software expandable to 60 drives 20 30 representation switchable zoomable Unlimited number of shows and scene changes cues Expanded operating display level on a second moni tor XGA Out Speed way points for fixed profile Profile and snapshot recorder Input of software operating limit positions Management of open and closed drive groups Path and time synchronous group run Group synchronous run central up down movement of previously selected hoists axes programmable with multiple run groups Object generator simple programming of complex scene changes with multiple drives and inter con nected loads Programming and execution of complex successive show sequences Acceleration and braking of drives groups and cues oupervision of the run direction and target speeds and complementary overload ascertainment through analysis of the rated speed when encoder operated Set up possibil
60. n T 49 01 70 32 98 51 0 49 0170 32 98 51 99 contact movecat de www movecat de MOVECAT OMK fixed speed chain hoists compliant with BGV C1 and DIN 56950 OMK electric chain hoists were developed in direct con nection with Movecat s MPC EC1 and IC1 control systems 50 as to form with them single unit offering the maxi mum in operational safety and functional versatility for professional BGV C1 point hoist applications The high degree of functional safety such as the targeted moni toring and supervision of the operational and emergency limit positions underload and overload optional power supply and duty cycle of eve ry individual hoist ensures reliable operation The field of application is assistance with setting up and dismant ling operations in fixed instal lations and simple stage runs and scene changes including the suspension of loads over human heads In the basic configuration the safety equipment com Basic configuration Hoisting height to m prises two independent DC brakes an adjustable under load cut out a four track geared limit switch and a patented overload system for the protection of the drive and the chain Continuous force and form closure wit hout interruption between the brakes and the load as well as the safe suspension of the load are guaranteed under all circumstances and at all times hoists are equip ped with an internal status and
61. n front of the brakes is a force and form fitted implementation All the bearing parts exhibit a design factor of 10 1 The Plus C hoist corresponds in full with the provisions of the igvw SQ Pe D8 Plus stan dard The Movecat Plus C allows setting up and dis mantling as well as instal lation operations without any need for the other wise requisite secondary Safety component or the time consuming dead hang of the system that would otherwise be required for D8 applications The basic con PLUS C 250 4 250 kg 500 kg 4 m min 2 m min 1 18m 400 V 3 P 50 Hz 5 90 0 37 kW 50 90 ISO FEM 1Am 4 em M5 EN 818 7 DAT 5 2 x 15 mm 2 IP 54 455 x 250 x 170 mm without chain hook and chain bag 31 kg 33 5 kg figuration includes a textile chain bag robust handles and the improved chain spa ring Easy Plate chain guide that offers the choice of ope ration in standard installati on positions or as a climbing hoist without conversion The Plus C 250 4 is availa ble in both DC direct control 400 V AC and HC remote control low voltage 24 V DC versions and is CE compliant tested and ready for opera tion at the time of delivery The chain hoist is designed for operation with Movecat phase changing controllers in accordance with DIN 60204 32 and EN 13849 1 and when used accordingly is cer tified as CE compliant pro vided the instructions set out in the user manual
62. nal control x kit for the internal evaluation of a e track geared limit switch in DC operation Connector cable multicorecable with 6pin multipin connector HC models Limit switching geared limit switch for RC and DC incremental encoder absolute encoder Load sensing dynamic LME LMS system 3 strain gauge principle 2 with x kit or Il controller 9 with l controller and additional equipment Running gear hand and electric Controllers DC MPC ID8 ED8 LD8 TD8 series and MRC DC series Controllers RC 108 ED8 LD8 RC series Miscellaneous transport case rain cover Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 9851 0 4910 7032 98 51 99 contact movecat de www movecat de MOVECAT PLUSlite DC and RC model chain hoist compliant with igvw SQ Pe D8 Plus Movecat s PLUSlite chain hoists were developed as economical rigging hoists for use in media equipment environments They are the first choice when it comes to the safe and reliable hois ting and positioning of trus ses stages ground support structures and other devices used in media applications Despite the attractive price point even in the basic con figuration great importance has been attached to profes sional quality and first class safety equipment It goes without saying that load bearing parts designed for twice the nominal load and a chain wit
63. ncursion of the brakes Way and time synchro nous group and load runs MOTION da cJ 0 rate eres DIPRHUECHI as well as complex scenic transformation operations in contemporary studio thea trical and event productions are therefore possible wi th the highest consideration accorded at all times to the demands of safety The in tuitive and easily mastered control elements permit the simple and intuitive configura tion and handling of V Motion power packs The user is guided by a logical operating structure with display out put Installation and service runs are therefore possible without any need for the con nection of ancillary devices via Up and Down buttons as well as an analogue speed control The power packs correspond in their basic configuration to BGV C1 and EN 61508 SIL 1 but they can be equip ped optionally with a second processor axis board for EN 61508 SIL 3 applications and therefore for overhead scenic runs V Motion Powerpacks are ready equipped for l Motion network operation Up to 120 devices can be operated through an I Motion network by a central controller e g I Motion MRC series In network operation the data is transmitted bi directionally and the user can follow and control operating parameters centrally V Motion Powerpacks com bined with V series drives Technical equipment 2 2247 BELAT are well suited to complex professional B
64. ndwidth of uses TECHNICAL DATA VMK S VMK S VMK S VMK S VMK S VMK S 125 40 250 33 500 6 500 12 500 24 1250 10 SWL chain fall upgradable to 2 125 kg 250 kg 500 kg 500 kg 500 kg 21910 10 Hoisting speed at 50 Hz 24 m min 20 m min 5 m min 10 m min 16 m min 8 m min Hoisting speed with V Motion 0 40 m min 33 m min 6 m min 12 m min 24 m min 10 m min Motor power 1 30 kW 2 60 kW 0 90 kW 2 60 kW 3 0 kW 3 00 kW Duty cycle 25 25 40 40 40 40 Load chain acc DIN 5684 8 5x15 mm 7x22 mm 7x22 mm 7x82 mm 9x27 mm 11x31 mm Weight with 18 m hoist 53 kg B4 kg 64 kg 64 kg 110 kg 138 kg Weight with 24 m hoist 56 kg 64 kg 64 kg 64 kg 120 kg 166 kg Dimensions L x W x H 460x196x275 540 x343x372 540x343x372 540 x343x372 605x486x320 640x486x382 w o chain hook mm Technical data Hoisting height up to m Protection against thermal overload Options Accessories Number of chainfalls 1 2 1 Status and test board V Motion Variable Motion Powerpack Protection rating IP 54 Class Installation position standard 1 PMC HV hybrid cable Suspension LME single hole suspension eyelet 2 noiseless brakes w function monitoring Transport case Dynamic real time load measuring system Load pickup swivel adaptor with eyelet Geared limit switch tracks 4 p p p y Chain container permanently installed Absolute encoder 29 bit resolution P y Transport carrying handles a e ch
65. nks to the integra ted main processor this is an independent control plat form with which four hoists or drives can be operated directly at a fixed speed without additional control devices or external safety computers in an operatio nally secure and user safe manner A large backlit LCD shows the operating states of the connected hoists Technical equipment uy Ne agr e including their operating parameters The MPC 4161 main and safety processors super vise all functions whereby the general analysis of all safety relevant parameters including all run states is implemented in an indepen dent safety chain per hoist Any operating error there fore leads invariably to the shutting down of the affected hoist and hoist group All the contactor switches and Safety circuits for opera ting and emergency limit as well as over and underload functions required for the Backlit LCD display of operating parameters and states per hoist Eight function keys and encoders with rotary press function backlit LED device status display Equipped with four adjustable motor protection switches E Stop button function illuminated GO button function illuminated a Key switch for central start up with bypass function Run direction and overall run display Incremental encoder input dual channel with run direction recognition high resolution Absolute encoder input SSI high resolution
66. nsumption 1 5 to 2 2 kW motor power MPC 2 4LD8 5 adjustment range 6 3 to 10 A motor current consumption 2 2 to 3 0 kW motor power RC Versions MPC 4 8LD8 1 adjustment range 1 0 to 1 6 A motor current consumption 0 25 to 0 37 kW motor power MPC 4 8LD8 2 adjustment range 1 6 to 2 5 A motor current consumption 0 37 to 0 75 kW motor power MPC 4 8LD8 3 adjustment range 2 5 to 4 0 A motor current consumption 0 75 to 1 5 kW motor power MPC 4LD8 4 adjustment range 4 0 to 6 3 A motor current consumption 1 5 to 2 2 kW motor power MPC 4LD8 5 adjustment range 6 3 to 10 A motor current consumption 2 2 to 3 0 kW motor power Technical equipment adjustable motor protection switch per drive emergency OFF button self latching GO button rotary control for direct selection of the run direction READY and ERROR status indicators robust metal housing CEE 16 A 4 pin motor connectors female DC models rear panel HAN 16 E multi contact connector for four motors RC models rear panel 16 A 32 A 5 phase changing plug with 1 0 m HO7HN F connector cable Technical data input 16 A 32 A CEE with phase changing plug depending upon total current consumption 2 4LD8 dimensions 19 3U D 310 mm without plug in connector 6 8LD8 dimensions 19 5U D 310 mm without plug in connector weight 9 0 kg 9 5 kg 3 U devices weight 11 5 kg 12 5 kg 5 U devices EN 60204 32 EN 13849 1 VD
67. nts permit the simple and in tuitive configuration and handling of V Motion Powerpacks The user is guided by a logical operating structure with display out put Installation and service runs are therefore possi ble without any need for the connection of ancillary devices via Up and Down buttons as well as an ana logue speed control The Powerpacks correspond in their basic configuration to BGV C1 and EN 61508 SIL 1 but they can be equipped optionally with a second processor axis board for EN 61508 SIL 3 appli cations and therefore for scenic runs over people s heads V Motion E series Powerpacks are ready for I Motion network operati on Up to 120 devices can be operated through an I Motion network by a cen tral controller e g I Motion MRC series In network operation the data is trans mitted bi directionally and the user can follow and con trol operating parameters centrally V Motion E series Power packs in connection with V series drives are suitable Technical equipment for complex and in particular for decentralized professi onal BGV C1 EN 61508 SIL 1 to SIL 3 applications imposing the most exacting kinetic and safety technical requirements in studio the atre events and tour use Integrated EMC filter consisting of a motor radio and line filter Backlit LCD display of operating parameters E Stop button function illuminated Four function keys for menu control a F
68. or mobile applications as well as the VDE 0701 0702 first inspection are also inclu ded The PLUSlite chain hoists are recommended for day to day rigging use when building up and dismantling stage concert and studio sets in the touring business as well as in the theatrical studio multifunction hall and trade fair sectors Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 88 51 88 contact movecat de www movecat de TECHNICAL DATA SWL 1 chain fall upgradable to 2 Hoisting speed at 50 Hz c Number of chain falls Motor power Duty cycle Operations per h Load chain acc EN 818 7 DAT Weight with 18 m hoist Weight with 24 m hoist Dimensions LxWxH w o chain hook mm TECHNICAL DATA SWL 1 chain fall upgradable to 2 Hoisting speed at 50 Hz c Number of chain falls Motor power Duty cycle Operations per h Load chain acc EN 818 7 DAT Weight with 18 m hoist Weight with 24 m hoist Dimensions LxWxH w o chain hook mm MOVECAT PLUSIite DC and RC model chain hoist compliant with igvw SQ Pe D8 Plus PLUSlite 125 4 PLUSlite 160 4 125 kg 160 kg 1250 kg 4 m min 4 m min 2 m min 1 2 1 0 18 kW 0 30 kW 25 150 29 150 4x12 mm 4x15 mm 20 kg 20 kg 23 kg 23 kg 317x196x186 317x196x186 PLUSlite 800 4 PLUSlite 800 8 800 kg 800 kg 11600 kg 1 1600 kg 4 m min 8 m min 2 m min
69. pin plug black DC model 1 m HO7HN F with CEE 16 A 4 pin black power and CEE 16 A 4 pin yellow remote control RC model The chain hoists are designed for operation with Movecat phase changing controllers in accordance with DIN 60204 32 and EN 13849 1 and when used accordingly are certified as GE compliant provided the instructions set out in the user manual are adhered to A UVV specialist factory inspection prior to first use for mobile applications as well as the VDE 0701 0702 first inspection are also inclu ded The PLUSlite chain hoists is recommended for day to day rigging use when building up and dismantling stage con cert and studio sets in the touring business as well as in the theatrical studio mul tifunction hall and trade fair sectors Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 88 51 99 contact movecat de www movecat de TECHNISCHE DATEN SWL 1 chain fall upgradable to 2 Hoisting speed at 50 Hz c Number of chain falls Motor power Duty cycle Operations per h Load chain acc EN 818 7 DAT Weight with 18 m hoist Weight with 24 m hoist Dimensions LxWxH w o chain hook mm TECHNISCHE DATEN SWL 1 chain fall upgradable to 2 Hoisting speed at 50 Hz c Number of chain falls Motor power Duty cycle Operations per h Load chain acc EN 818 7 DAT Weight with 18 m hoist Weig
70. re it has proved possible to opti mize the design of all com ponents to achieve an out standing laden to unladen weight ratio e g Compact 500 4 unladen weight only Technical data Model Type oafe working load Hoisting speed Hoisting height Chain falls Power supply Motor power Duty cycle Mechanism group Hoisting gear Load chain Load chain EN 818 7 DAT Protection rating Dimensions 29 9 kg incl 18 m chain The compact hoists are equipped with newly develo ped components such as a maintenance free brake and a friction clutch to guard against overload these guarantee safe and relia ble operation even during sustained periods of use The patented safety friction clutch mounted in front of the brakes is a BG and T V approved force and form fitted implementation Further standard features include a textile chain bag a robust carrying handle and the new chain sparing Easy Plate chain guide that offers you the choice of using the hoist in a standard installation position or as a climbing hoist The Compact 500 4 is available in both DC direct control 400 V AC and RC remote control low voltage 24 V DC versions and is COMPACT 500 4 500 kg 1000 kg 4 m min 2 m min 18 m 24 m M2 400 V 3 P 50 Hz 5 95 0 37 kW 40 ISO FEM 1Am M4 em M5 5 2 x 15 mm IP 54 HE version L x W x H without chain hook and chain bag Weight incl 18 m chain Weight incl 24 m
71. s E Stop button function illuminated Separate backlit GO buttons for Single and Master modes Enabled differentiated error display Error for PDU plug in controller modules and control panel differentiated display of phases L1 to L3 for PSU as well as the plug in controller modules display of the rotating field direction of the voltage feed Any correction that may be necessary to achieve a clockwise right handed rotating field is performed automatically individually adjustable motor protection switch with error dis play for each motor channel power station PDU with 30 mA RCD Personnel and device protection triple automatic circuit breakers type C and separately fused grounding receptacle on the front panel enabled display of the active DMB permission switches four CEE 4 pin direct out plugs motor 1 4 HAN 16 E 16 pin multicore panel connectors for four drives each optional 19 pin EU Socapex XLH MX7 and XLR FX6 M Link system incl dummy connector XLR panel connector MPC 16TD8 two 24 32TD8 four units each DMB input 19 rack drawer 3U except MPC 32TD8 Technical data Input 63 A CEE with 1 5 m connector cable MPC 16 24TD8 Input 125 A CEE with 1 5 m connector cable MPC 32TD8 Dimensions 16TD8 600 870 x 800 mm Width x Height x Depth closed incl castors MPC 24TD8 600 x 1 100 x 800 mm Width x Height x Depth closed incl castors MPC 32TD8 600 x 1 250 x 800 mm
72. s in the trade fair events studio and touring sectors Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 88 51 88 contact movecat de www movecat de EI TDVGELTTT I MOTION EXPERT T 11 FEATURES Implementation in accordance with BGV C1 and EN 61508 SIL 3 32 bit high performance bus system Safety processor with risk structure Power saving Centrino CPU technology Passive cooling Operating states are stored in non volatile RAMs Self testing of relevant functions prior to system enabling a Night design buttons and input devices illuminated a Simple intuitive operation by means of direct input via a function keyboard multifunctional control knob and 19 touchscreen User hierarchy implemented by means of user ID chip card or password Group transcending error supervision when connected in a network Supervision and display of the operating states of the hoists drives such as run direction speed position operating and emergency limit excess temperature brake gap monitoring dynamic load analysis as well as load and run groups Multi user operation 2 devices a Internal UPS 3 minutes with network filter Operating system Win XP Pro NE au A Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32
73. sition operating and emergency limit excess temperature brake gap monitoring dynamic load analysis as well as load and run groups Technical data 230 V 50 Hz electricity supply Dimensions 19 BU 483 x 265 x 220 mm Width x Height x Depth without plug in connector Weight 8 5 kg BGV D8 BGV C1 igvw SQ P2 D8 Plus and EN 61508 conformity up to SIL 3 oft depending upon configuration Options Accessories Pull out 19 keyboard with trackball MPC I Motion Power Controller series 1 V Motion Motion Power Controller Motion NDB 6 12 Network Distribution Box Motion NMB 14 Network Master Box Motion NBB Network Booster Box EI TDVELTTT Software Operating system Win XP Pro Software Movecat I Motion Management of up to GO drives or network con trollers with IP address standard configuration 24 drives software expandable to 60 drives 20 30 representation switchable zoomable Unlimited number of shows and scene changes cues opeed way points for fixed profile Profile and snapshot recorder Input of software operating limit positions Management of free and closed drive groups Path and time synchronous group run Group synchronous run central up down movement of previously selected hoists axes programmable with multiple run groups Object generator simple programming of complex scene changes with multiple drives and inter con nected loads Programming
74. st compliant with igvw SQ P2 D8 Plus The Movecat Plus C 250 4 electric chain hoist is based on the tried and tested Compact series was desi gned to satisfy the deman ding requirements of use with events equipment and to combine safety of opera tion with a compact light weight format to guarantee simple and practice optimized handling Their principal characteristic is a well balanced central transmission block to which the drive motor is flange mounted directly at the side This makes possible in con nection with the protected fan wheel optimal heat dissi pation and thereby an exten ded duty cycle Thanks to the off centre modular struc ture it has proved possible to optimize the design of all components to achieve an outstanding laden to unla den weight ratio e g Plus C 250 4 unladen weight only Technical data Model Type oafe working load Hoisting speed Hoisting height Chain falls Power supply Motor power Duty cycle Mechanism group Hoisting gear Load chain Load chain Independent DC brakes Protection rating Dimensions HE version L x W x H Weight incl 18 m chain Weight incl 24 m chain 31 kg incl 18 m chain The Plus C hoist is equip ped with specially developed components such as two independent maintenance free brakes and an overload safety friction clutch that guarantees safe and reliable Operation even in continuo us use The safety friction clutch mounted i
75. te encoder SSI 29 bit a V Motion Variable Motion Powerpack Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 0170 32 98 51 0 4910 70 32 98 51 99 contact movecat de www movecat de MOVECAT VMK S Il chain hoists for variable and fixed speeds in accordance with BGV C1 and DIN 56950 The VMK S hoists accor ding to BGV C1 DIN 56950 2012 05 and EN 61508 SIL 3 are notable for their innovative feature set and unusually flexible handling whilst satisfying at all times the highest standards of safe ty Particularly remarkable are the two independent low noise and maintenance free brakes with air gap monito ring a real time load measu ring module integrated in the eyelet that ascertains the real load and from it the overload and underload values and a thermosensor that monitors permanently the operating temperature of the motor A friction clutch as overload pro tection is not required by the VMK S hoists so that conti nuous force and form closure without interruption between motor and load is at all times guaranteed Furthermore a dual channel incremental encoder on the motor axis and a high resolu tion 29 bit absolute encoder on the chain output axis are used This allows exact posi tioning better than 1 mm that can be replicated at all times and therefore precise target runs with the greatest repetition accuracy All components h
76. test board This emplo ys Movecat s traffic light principle to indicate without ambiguity the current opera ting status and contains the testing equipment required by DIN 56950 for the ope rating and emergency limit switches load measuring system and brakes The standard version of the OMK hoists is equipped with a single eyelet suspension with an integrated underload cut out on the motor side and with a hook on the chain side The use of a special gear in connection with a chain bag wheel plus five or more chain link bags makes smooth and quiet operation possi ble Incremental and absolute encoders thermal overload protection dynamic load measuring systems additi onal chain storage capacity and trolleys are available as options for OMK hoists The modular component set per mits cost efficient project Specific adjustments even in the case of complex and high ly exacting application and safety demands The requisite control contac tors and the power elec tronics are accommodated in the external controllers Freely scalable powerful integrated systems in accor Convertible to dual chainfall operation twice the load bearing capacity half the speed Standard installation position optionally as climbing hoist Compact light construction Smooth quiet operation Long duty cycle Precision milled specially hardened chain bag wheel with at least 5 bags High quality speciall
77. the highest repetiti on accuracy In conjunction with V Motion Powerpacks VMK L hoists can be controlled at variable speeds for way and time syn chronous runs or else directly hoists up to 10 m min with the MPC 4IC1 controllers at a fixed speed These high Speed hoists in combination with V Motion Powerpacks are capable of speeds ranging VMK L VMK L 500 6 500 12 500 kg 500 kg 5 m min 10 m min 0 6 m min 12 m min 0 9 kw 2 6 kW 40 40 7x22 mm 7x22 mm 64 kg 64 kg 64 kg 64 kg 540x343x372 540 x343x372 12 27 P0ELZ7F from O to 40 m min whilst functioning as a closed loop system with full torque even during runs continuing beyond the null point floating state and reversal of direction wit hout incursion of the brakes With their remarkable fea tures VMK L hoists recommended for high quality applications in loca tions such as in TV studios theatres and events venues demanding maximum perfor mance and safety combined with the widest possible band width of uses VMK L VMK L 500 24 1250 10 500 kg 1 1250 1 16 m min 8 m min 24 m min 10 m min 3 0 kW 3 0 kW 40 40 9x27 mm 11x31 mm 110 kg 138 kg 120 kg 166 kg 605x486x320 640x486x382 Installation position standard Suspension type load measuring eyeless chain hook Chain guide Easy Plate Chain container permanently installed Options Accessories Transport carrying handle Absolu
78. tic systems at the highest technical level in accordance with BGV C1 The power packs can be configured for a variety of different V se ries drives from V Motion 15 for drives up to 1 5 kW to V Motion 75 for motor capacities up to 7 5 kW A large backlit LCD shows the operating states as well as the position load and Operating parameters of the connected hoist Main and Safety processors monitor all functions The requisi te contactor switches and Safety circuits for overload and underload protection as well as operating and emer gency limit switches are integrated These are com plemented by run commands the execution of which and resulting internal opera ting states are tested and evaluated In the l Motion network these are compa red with parallel V Motion Powerpacks and the cor rectness of the way time and load group run tested V Motion Powerpacks sup port speeds continuously variable from zero to ma DIPRHUECHI ximum as a closed loop system with full torque even during runs continuing be yond the null point true zero speed and reversal of di rection without incursion of the brakes Way and ti me synchronous group and load runs as well as com plex scenic transformation operations in contemporary studio theatrical and event productions are therefore possible with the highest consideration accorded at all times to the demands of safety The intuitive and easily ma stered control eleme
79. ting states simple intuitive operation Single single hoist selection and Master all hoists UP or DOWN modes selectable via key switch eight channel 19 individual controller plug in modules with motor protection switches their own safety supervision and phase and status displays power station with mA ground fault circuit interrupters RCD automatic over and under voltage phase sequence and symmetry supervision as well as rotating field detection with automatic rotating field correction group transcending error supervision in Link mode for up to 12 touring racks max 384 hoists in T network a M Link compatible with the MPC 4108 and 4ED8 controllers max 8 devices DMB system three level permission buttons up to four units with self detection and active status display implementation according to 08 and igvw SQ 08 Plus Selective bypass design for increased operating safety Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 9851 0 4910 7032 98 51 99 contact movecat de www movecat de 16 24 32 08 Il EI TDVOELTTT MOVECAT MPC 16 24 32TD8 II Motion Power Controller compliant with BGV 08 and igvw SQ P2 D8 Plus Technical equipment professional shockproof road case with six handles and four castors two lockable control panel with choice of function illuminated rotary or rocker switche
80. tion Image rotation flip TFT The functions listed depend upon the actual hoist drive configuration Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 98 51 99 contact movecat de www movecat de EI TDVGELSATT I MOTION EXPERT T 11 MOVECAT I MOTION EXPERT T System Controller compliant with BGV D8 and C1 as well as igvw SQ P2 D8 Plus and EN 61508 SIL 3 Technical data Technical equipment 230 V 50 Hz electricity supply Dimensions 670 x 532 x 180 565 mm Width x Depth x Height with touchscreen lowered raised Weight 21 kg BGV D8 igvw SQ P2 D8 Plus BGV C1 EN 61508 SIL 3 conformity Flippable 19 TFT touchscreen Pull out alphanumeric keyboard with trackball Direct input keyboard backlit E Stop button function illuminated 3D Space Navigator multi functional control knob 2 dynamic control levers with dead man function 2 incremental limit controls e additional dead man buttons Options i Accessories Motion NDB 6 12 Network Distribution Box Motion NMB 14 Network Master Box a V Motion Motion Power Controller MPC I Motion Power Controller series l Motion 1 0 0 O cue start keys Main switch for central start up SSD hard disk otorage surface in full A3 format e x C14FC I Motion Net output connectors 6416 input output box 64 inputs 24 V DC and 2 USB ports for mouse M stick etc 16 outputs 24 V
81. tory inspection prior to first use for mobile applications as well as the VDE 0701 0702 first inspection are also inclu ded The PLUSIite 1000 4 chain hoist is recommended for day to day rigging use when Precision milled specially hardened chain bag wheel with at least 5 bags Highly robust round steel link chain acc DIN 5684 Basicplate chain guide Single eyelet alternatively motor hook rotating chain hook Permanently installed fold away textile chain bag Robust light alloy cast housing closed on all sides with two handles Black low reflective finish RAL 9005 EI TDVELTTT building up and dismantling stage concert and studio sets in the touring business as well as in the theatrical studio multifunction hall and trade fair sectors Compact light construction smooth quiet operation use in climbing or standard positions without conversion m HOZ7HN F connector cable with CEE 16 A 4 pin plug black DC model 1 m HO7HN F with CEE 16 A 4 pin black power and CEE 16 A 4 pin yellow remote control RC model Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 9851 0 4910 70 32 98 51 99 contact movecat de www movecat de PLUSlite 2012 MOVECAT PLUSlite 1000 4 DC and RC model Chain hoist compliant with igvw SQ P2 D8 Plus DIN 56950 2012 05 Technical data Model Type Safe working load
82. u al number depends upon the size of the hard disk The data can be exported and sto red externally The 1 Basic Show Controller is recommended in combination with the MPC and V Motion Power Controllers for pro fessional kinetic applications in the rigging trade fair events studio and touring Sectors Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49101 70 32 98 51 0 49 0170 32 98 51 88 contact movecat de www movecat de I MOTION BASIC MOVECAT I Motion Basic Show Controller compliant with BGV D8 and C1 as well as igvw SQ P2 D8 Plus and EN 61508 SIL 1 to SIL 3 depending upon configuration FEATURES Standard configuration according to BGV C1 EN 60204 1 and 32 EN 13848 1 and EN 61508 Safety processor with risk structure 32 bit high performance bus system Optional dual channel safety computer in conformity with SIL 3 Power saving CPU technology Operating states are stored in non volatile RAMs Self testing of relevant functions prior to system enabling Simple intuitive operation using a 12 touchscreen and direct input via a function keyboard as well as a high resolution rotary encoder with keying function a 12 AC LCD touchscreen backlit Group transcending error supervision when connected in a network s Supervision and display of the operating states of the hoists drives such as run direction speed po
83. unction switch for central start up remote local bypass optionally as key switch Up and Down buttons as well as a speed control for manual installation backup operation Incremental encoder input dual channel high resolution Absolute encoder input SSI high resolution Motion network input network address software determinable Three digital inputs for ancillary functions FC data input for frequency converter parametrisation Force cooled by a temperature controlled noiseless fan Robust metal housing with four handles Three M 12 rigging options for couplers when truss mounted Mounting bracket for safety cable C optional or I Motion network controller Copyright 2014 THINK ABELE GmbH amp Co KG Rudolf Diesel StraBe 23 D 71154 Nufringen T 49 01 70 32 98 51 0 49 0170 32 98 51 88 contact movecat de www movecat de V MOTION E 15 30 40 55 75 EI TDVELTTT MOVECAT V MOTION 15 30 40 55 75 Variable Motion Powerpack compliant with BGV C1 and EN 61508 SIL 1 to SIL 3 depending upon configuration FEATURES Standard configuration according to BGV C1 Optionally upgradable with dual CPU to EN 61508 SIL 3 Interference Suppression Class C1 C2 EN 61800 3 up to 50 70 m PMC HV motor cable at 12 kHz pulse frequency Reduced leakage current Unrestricted use in residential and mixed use areas with separate EMC systems Operation of multiple devi
84. ver dead man switch unit Due to this feature set the Basic S controller is ideal ly suited to the provision of small to medium sized sys tem solutions with variable speed drives Naturally up to sixty D8 D8 Plus and C1 drives can also be control 12 AC LCD touchscreen backlit keypad for direct input E Stop button function illuminated User ID chip card reader Key switch for central start up with bypass function High resolution rotary encoder with button function GO button Start backlit SSD disk drive Internal UPS 3 minutes with network filter 2 Motion Net output sockets 2 USB ports for add mouse M stick etc XGA output SUB D for second monitor Multi pin remote input output Robust 19 BU metal housing with two handles Copyright 2014 THINK ABELE GmbH amp Go KG Rudolf Diesel StraBe 23 D 71154 Nufringen 49101 70 32 88 51 0 49 I0 7032 led and supervised in mixed operation at fixed or varia ble speeds The option exists of integrating already exi sting drives and other stage machinery The controller corresponds in its basic configuration to BGV D8 BGV C1 and EN 61508 SIL 3 and is there fore equipped for overhead scenic runs The Basic S controller controls and supervises by l Motion network the Movecat MPC and V Motion Power Controllers and forms with them a closed safety network The safe efficient and intuitive entry of key op
85. y hardened gear mechanism Overload protection by means of a patented friction clutch Braking system with two independent DC brakes individually testable BG tested geared limit switch for raising and lowering operation and emergency limit Underload slack chain shutdown Status board with traffic light display and test board for the independent testing of brakes and limit switches Basicplate chain guide Highly robust roundsteel link chain acc DIN 5684 Chain hook rotatable Permanently installed textile chain bag Robust light alloy cast housing closed on all sides LMK 125 with plastic cap Black low reflective finish RAL 9005 Protection rating IP 54 Class F Connection via an internal terminal strip optional hybrid connected cable with C8 24 multi pin plug 22 2 47 BELAT c dance with BGV C1 can be realized even in mounting locations that are hard to access he operating sta tuses are indicated by the relevant MPC controller and on the remote controls OMK hoists are ready for use with Movecat MPC EC1 and IC1 controllers in accor dance with DIN 60204 32 and EN 13849 1 and when used accordingly are certified as CE compliant provided the instructions set out in the user manual are adhe red to A UVV specialist facto ry inspection and the VDE 0701 0702 first inspection are also included OMK hoists are the first choice for professional use
86. y remar kable are the two indepen TECHNICAL DATA SWL chain fall upgradable to 2 Hoisting speed at 50 Hz c Hoisting speed with V Motion Motor power Duty cycle Load chain acc DIN 5684 8 Weight with 18 m hoist Weight with 24 m hoist Dimensions L x W x H w o chain hook mm Technical data Hoisting height dent DC brakes integra ted real time load measuring module that ascertains the real load and from it the over load and underload values and thermosensor that monitors permanently the Operating temperature of the VMK L VMK L 125 40 250 33 125 kg 250 kg 24 m min 20 m min 40 m min 33 m min 1 3 kW 2 6 kW 25 25 5x15 mm 7x22 mm 53 kg 64 kg 56 kg 64 kg 460x196x275 540 x343x372 Number of chain falls optional 1 2 a Power supply 400 V 3 PH 50 Hz Protection rating IP 54 Class F 2 independent brakes Dynamic load measuring system Geared limit switch tracks 4 2 channel incremental encoder high resolution Protection against thermal overload motor No less exceptional is the patented overload system that protects the drive and chain Continuous force and form closure without interrup tion between brakes and load is at al times guaranteed Furthermore a high resoluti on dual channel incremental encoder is used that allows exact positioning better than 1 mm with V Motion and therefore precise target runs with

BGV C1 BGV D8 igvw SQ P2 D8 Plus EN 61508 SIL 1

Contents

Download Pdf Manuals

Related Search

Related Contents