NVR User Manual - Sunsky
Contents
1. You can also manually input the IP camera information instead of auto searching the IP and then click save Below are some main functions of the NVR The menu consists of display setting PTZ setting playback record alarm capture and file manager etc The device enters the real time monitoring screen after normal booting There are superposed date time and channel name of every channel Icons of record 3D positioning and alarm status will appear in the right upper corner 3 3 3 Display Setting Click la the interface on the right will show 1 Resolution select the most appropriate resolution as needed 2 Language Different languages for selection For example Simplified Chinese Setting x Traditional Chinese and English 3 Skin There are original version and Stream Type Sub Steam blue for selection Language English Skin Blue 4 Screen mode there are different Screen Mode 16 Screen screen modes for selection for Rotation Interval 5 example 1 screen 4 screens Y al Enanle SEQ Cancel screens and so on 5 Rotation Interval Setup the time interval of rotation Tick Enable SEQ to start rotation Note the rotation function can only be enabled under 1 screen 3 3 4 PTZ Setting 3 11 Network Video Recorder User Manual 3 3 4 1 PTZ Control Before starting the PTZ control please firstly confirm the PTZ parameter settings PTZ protocol and the correct conn2. picture on the right Prono DE The functions of the buttons are as below Function l as Function Description Program connects the device and start to play the Play l video Sauacnel Capture the current image the pictures are saved in p the picture directory of the mobile phone by default l Set IP address of the NVR or DDNS port user name Setting and password and device name Last Group Can select the channel of last group E Next Group Can select the channel of next group Select to play the video of any channel of the device Coordinating with the Next Group you can switch to 8ch or 16ch PT Control PTZ up down left and right E MH Tora Increase or decrease the focal length Length 2 Increase or decrease the iris 4 Use for the first time you need to do the following settings Channel 26 Network Video Recorder User Manual D Sa i 2 03 am History Address The public IP address or DDNS of the NVR Devices Info Port The server port of the NVR Address pr NVR Title The device name of the NVR which is por l used to differentiate different devices pan MyDVR User ID Same as the user name on IE User ID user Password Same as the password on IE Ca Return button 5 4 Blackberry Mobile System Password The mobile client software supports version above 4 6 of blackberry system The screen resolution should be 480 360 or 480 320 including model 8900 900
3. 16ch lt E E PTZ Control Control PTZ up down left and right Y 29 Network Video Recorder User Manual Zoom in and zoom out increase and Zoom Focal decrease focal length and iris The above Length Iris prompting bar will prompt the function of the selected button Use for the first time or need to modify the parameters please click Setting button to enter the parameter setting anac interface which as shown in the below picture IP The public IP address or DDNS of the NVR Port The server port of the NVR User Name The same as the user name on IE utes Password The same as the password on IE Allias Give a name to the device and it will appear on the playing page 5 6 Windows Mobile System Mobile client supports windows system version above 2003 It only supports screen touch version currently 1 Copy the MEYE_WM cab to the mobile and install it Click the corresponding program icon to open as shown in the picture on the right size 0x0 RAPAASASOSA Function Button Function Description Connect and Program connects the device and Play start to play the video Connect Set IP address of the NVR or DDNS Setting Setting port user name password and device name Disconnect Program disconnects the video 30 Network Video Recorder User Manual Select to play the video of any Select Channel channel of the device PTZ Control
4. 5 5 Account Paramete a is 19 33 5 6 IS A a a a a ia 19 3 3 5 7 System Management cccccccessssscccccsssssseseeccessssseeeeceeeesseseees 19 39 090 DEVE Odia 20 33 O PAVI K CRON Oe N 20 39 REON BOU ib 21 23G Manua o AA causa bean OEE T nnd eateGeseicies 22 3 3 9 Alarm Mama aarun OE A 22 NS e E ANE 23 Network Video Recorder User Manual SS AA 23 Chapter 4 Network Operating INSITUCION ocoooooooocccccoononnccccononananonoss 24 4 1 WEB Browser Operating INSIUCION oooooooooooocccccooooonaancnononannnos 24 4 1 1 Network CONNEC ON oooooooccccccononcnccccconoonanncnonononannnonocccnonnnnananonons 24 4 1 2 AtciveX Control Installation and User Login and Logout 24 Chapter 5 Mobile Viewing Operating InSTUCHON ooooooooooccooooooooooo 29 5 1 Client Software OD AININJ oooooooccccconononnnccccononnnncncnonononanannnnnoconnnos 20 5 2 The Parameter Settings of the NVR which Supports Mobile Surveillance 20 5 3 Android Mobile SyS EIT oooooooccccconooncccnccononanananonononanananonoconannnnnos 26 54 Blackberry Mobile SySlemT ooooocooooooccconoooncccononancnconanananconanananccnnns 21 DD Symbian Moble VS iii 29 5 6 Windows Mobile SySteIT oooooccccccoooonccconononannncccnononanananonononnnnos 30 5 7 IPhone Mobile SySteIT coooooooccccconononcnccononocanncn
5. Control PTZ up down left and right Zoom Zoom in and zoom out Focal Length Increase or decrease the focal length Iris Increase or decrease the iris Capture the current image the pictures are saved in the picture directory of the mobile phone by Snapshot The functions of the buttons are as below 2 Use for the first time or need to modify the Username Settin d parameters please click button to asswor Server enter the parameter setting interface as shown in Port A the below picture Notes Username The same as the user name on IE Password The same as the password on IE Server The public IP address or DDNS of the Auto Connect NVR Port The server port of the NVR Notes The description of the NVR which is used to differentiate different devices 3 After successful setting press OK button to enter the connection interface The image will appear if connected successfully 5 7 iPhone Mobile System Mobile client supports iphone system version OS 3 0 or higher version including iPhone iPod touch and so on 31 Network Video Recorder User Manual Installation and Operation Instruction 1 Run the App Store of iPhone switch to search page input TMeye in the search bar and find the application program package click install After finish installation the program icons will appear as shown in the below picture Settings App Store Photos gt 0 fo 4 E 2 Cli
6. Reboot Recovery Configurati o o alol a w n a Main Type of Log There are All Type Alarm Exception and Operation for selection Sub Type According to different main types there are corresponding sub types for selection From You can select the start time of a log you want to search To You can select the end time of a log you want to search Export You can export the log you have searched Playback and will show the below interface Network Video Recorder User Manual led Chany E a ial a a a ial a a al dl a a a a Search Select and tick the channel which you want to search the recording and it will auto search the recording which meet the search condition as shown in the below picture 1 Pause pause the current playback image 2 Stop Stop the playing video 3 Slow Slow down the playback speed there are 1 2 1 4 1 8 1 16 times 4 Fast Accelerate playback there are 2 4 8 16 times 5 Snapshot You can capture picture in any playback channel 6 Backup You can backup the recording of any channel Insert USB storage device click Refresh to detect the USB device If the USB device is recognized normally it will be displayed in the list then select the channel start time and end time click Start and the system will auto start backup 3 3 7 Record Backup Click and below interface will show a e Network Video
7. Recorder User Manual Channel From 2012 1 7 0 00 00 To 2012 1 7 23 59 59 Browse Backup to FileType H264 MP4 AVI File Size Process Unmount USB Start Stop Exit Insert USB storage device click Refresh to detect the USB device If the USB device is recognized normally it will be displayed in the list then select the channel start time and end time click Start and the system will auto start backup and show the progress 3 3 8 Manual Record Channel 123456789 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 No Record Bara aaa aaa aa aaa aa ee eee Manual COUI E E E E E E E E E E eee eee eee eee Schedule Rceord BAI BRR RRR eeeeee eee 3 3 9 Alarm Information e right will show Click and the interface on the All the alarm information of the device is recorded in the Alarm list f 22 Network Video Recorder User Manual 3 3 10 Capture FA O Single click on the preview channel click Capture you can capture picture on any preview channel 3 3 11 File Manager and the below interface will show Channel January 2013 Y ec ee MO Ge 7 A E 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Delete The backup files in the external storage device and the capture pictures will be displayed in the document list bar Wre Network Video Recorder User Manual Chapter 4 Network Operating Instructio
8. Then input the ip address subnet mask default gateway DNS server address1 and DNS server address 2 11 Enable 3G Tick the box before Enable 3G click 3G to enter the following interface a The access number of the China Unicom is 99 APN address is 3GNET 16 Network Video Recorder User Manual b The access number of the China Telecom is 777 APN address is blank c The access number of the China Mobile is 99 1 APN address is blank 12 Advance gt DNS Server Address1 The IP address of the DNS server DNS Server Address2 The standby IP address of the DNS server Alarm Host IP Enter the IP address of the alarm host Alarm Host Port Enter the port of the alarm host Enable PPPOE you can enable the PPPOE service v Input the PPPOE user name Y Input the dynamic address of the device Y V V WV Y Confirm password DDNS Settings Through the DDNS server there should be a PC with fixed IP address on the internet and run this DDNS server on this PC Select DDNS server type There are IP Server Dyndns Peanuthull for selection Input the server name Input the port Input the user name Input the password Confirm the password Input the standby domain name NTP Settings Enable NTP timing Oo NO gt Eh 5 Server Address Input the IP of the NTP server NTP Port This SNTP only supports TCP transmission It is default to 123 Synchronize ev
9. also please check whether there is IP conflict Q Need long time waiting for the image showing A Different brands or different models of IPC have time difference for the imaging showing but normally the waiting time should less than one minute But it s true that some may be longer than one minute Q After saving no imaging comes out A Maybe the user name or password is mistake also maybe the private protocol of IPC caused the compatible problem Please try again by the IPC that support i8 protocol or the standard ONVIF protocol Q Some channel has the recording information and the image comes out after double clicking but the image fails to show at the multi channel preview mode A Right click the image channel to bring out the main menu then go to IP Channel Setting select Sub stream instead of Main Stream for the Mode item Then save the configuration If there still no image come out at multi channel preview mode please adjust the sub stream less than 1M 47
10. calculate the total capacity accumulating needed for allchannels alarm recording including motion detection Unit GB q xa a alarm occurring rate Alarm occurring rate 7 T 1 Tn E n 1 2 3 T The alarm time of the Nth day the time difference of larm end and alarm start Unit h Z 24h q the needed HDD capacity of T channels timing For example if the alarm occurring rate a for a month is 50 then the alarm 235 Network Video Recorder User Manual recording capacity of 16 channels in one month is Unit GB xa x50 7648x50 3 7GB q dis 6 2 Remote Control Operation Numb icon o Description Number leon Last Record Key l Section A eee re ea E ua Auxiliary 5 l 17 Down Function Key Device Code STATUS DEV 18 Left Key PTZ Control 7 PTZ 19 Right Key Playback i 20 e Enter Key Pause Key Fast Forward Channel 11 23 1 16 Key 1 16 12 4 FastBackward Y o lt Note When there are devices in a same place the remote control should choose a device first according to the device number Therefore you should define one unique device number for each machine otherwise the remote control operation may simultaneously affect the devices which are with the same device number 36 Network Video Recorder User Manual 6 2 1 Remote Control Battery Put into 2 pieces of No 7 batteries Make sure that the positive and negative polarity correspond w
11. is 5053 7 2 Router Setting As the so many different router brands take the TP LINK router as the example please do the operation as the following 1 Open IE browser and input the gateway like http 192 168 1 1 2 Input the User Name and Password to login the router management TP LINK default user name admin password admin 3 Click the Forwarding Rules of tool bar at the left side some router named it by Port Mapping click Virtual Server gt click Adding New Items Add the following DVR IP address to there and save it HTTP Port default number 80 Device Port default number 5050 Default Port default number 5051 Default Port default number 5052 Cell Phone Port default number 5053 After finish it and click the item All entries effect Now take 3322 as the example bound the dynamic IP address www 3322 org to fixed domain name Enter 3322 website and input the application information Take note the domain name after applying successfully Note domain name user name and password need to add on the DDNS setting of DVR network setting Now input the applied domain in the IE browser you can login the NVR Note If you fail to login in please try again by adding colon http port number 45 Network Video Recorder User Manual 7 3 IE Login Operations Open IE browser and input the domain name then it pop out the following information Downloading activx please wait or click here Once the download has comp
12. way logging time and IP address Local Playback Local PTZ El Upgrade and Format Local Manual Recording Ml Local View Mi Local Playback Local IP Device W Local Parameter Setting Local Backup W Local Log Query Local Reboot and Shutduwn Remote PTZ El Remote Preview Remote Playback Remote Manual Recording Arm Software and Output El RemotePlayback El Remote Backup El Remote Parameter Setting Control Serial Port Remotely W RemoteLog Query Remote View Renote Upgrade and Form al Renote IP Device El Voice Intercom f Remote Reboot and Shutdown Cancel 3 3 5 6 HDD Settings You can format the HDD and view the HDD capacity the free space and status etc 3 3 5 7 System Management Update Insert the USB storage device into the NVR click Browse to find the upgrade file and click Upgrade Auto Reboot You can select every day every week once and disable to 19 Network Video Recorder User Manual maintain the system Stream Info You can view the main stream and sub stream of each channel 3 3 5 8 Device Log You can search the logs according to different types and different date and time as shown in the above picture 4 5 3 3 6 Click 20 a Dvice Channel Network Sub Type Alarm Account From 2013 2 7 0 00 00 a System Device loc 2013 2 7 23 59 59 Stream Info HDD Setting Subtype hanne Update 2 7 Y mn Remote Arming a Auto
13. 0 9700 9630 and so on 5 4 1 Installation and Operation Instruction 1 Install the vMEye cod and vMEye alx packages into the Blackberry mobile through the Desktop Manager Click option on the mobile desk and then click application to find the vMEye and then enter Click Edit Permission and set allow for all permissions Some of the permissions cannot be set allow the option is grey and cannot be modified and can be ignored and click save directly 2 Click vMEye icon to run the program then enter the initialized interface through a initialized splash interface which is shown as below picture Setting a 27 Network Video Recorder User Manual Name The device name of the NVR which is used to differentiate different AMES Address The public IP address or DDNS of the NVR Port The server port of the NVR User ID The same as the user name on IE Password The same as the password on IE Network Type Select the network type you want to use GRO i SAVRA 3 Click Login to enter the main interface The functions of the buttons are as below FENCIBn Name Function Description Button Program connects the device and start to Play play the video Full Screen Full screen play Capture the current image the pictures are Snapshot saved in the picture directory of the mobile phone by default l Set IP address of the NVR or DDNS port Setting l user name password and device name Next G
14. 11 Video Standard 1080P 1920x1080 fps 720P 1280x720 30fps Monitoring Image Quality 1080P 1920x1080 720P 1280x720 Recording Playback Any 4ch 1080P 720P playback simultaneously Quality Image Motion Detection Each screen can set detection areas and set 6 level sensitivity Region Cover Every channel can set 4 cover regions Voice Talkback Two way voice talkback 39 Recording Mode Backup Way Recording Storage Video Input Audio Input Video Output Audio Output Ports Alarm Input External Alarm Output Network Port Wireless RS485 Port USB Port Local Login HDD Port Power Supply Mobile Surveillance Power Consumption Working Temperature Working Humidity Dimension Wight without HDD Outside Carton Installation Way Network Video Recorder User Manual Support manual auto dynamic detection alarm trigger record mode Support U disk USB mobile HDD USB burner 9ch 720P 16ch 720P 9 6 4ch network audio 16 12 9ch network audio sername and pascword User name and password 8 SATA 2 E SATA HDD port AC110 240V ATX AC110 240V ATX 300W 6 3 3 1 5U 2U 1080P Professional NVR Series Series 1 5U 2U 1080P Professional NVR Series 40 Network Video Recorder User Manual Standard 1 5U Chassis Image code quality adjustable variable bitrate and Image Code Control l i constant1bitrate optional l Each screen can set detection areas and set Image Motion Dete
15. B4 30 HTTP Port 80 Multicast 255 255 1 0 Enable Wi Fi Enable 3G 3G Advance OK Cancel Then click the right mouse button and appear the below menu Click IP Channel Setting and will appear below interface 7 Search Search IP Subnet Mask Defaul Gateway DNS1 Search Channel1 Protocol Onvif IP 192 1368 1 88 Port 8080 Stream Type Main Stream Network Type TCP Search admin Password ecoeeeo Delete aD Capture Playback Disply Setting aT ge Backup amp Alarm File Manager Image Setting E Voice Talking E IP Channel Setting v OpenALL HH 4 Screen HH 9 Screen HH 16 Screen F start To connect IP camera click Search NVR will auto search the IP cameras in LAN then it will appear IP camera list Network Video Recorder User Manual Search Search IP Subnet Mask Defaul Gateway DNS1 Search Search Channel1 Protocol Onvif G 192 1368 1 88 Port 8080 Stream Type Main Stream Network Type TCP Search admin Password e To connect certain IP camera please select the IP camera in the below list and double click it the NVR will auto fill in the IP protocol port of the IP camera in the above input box Then manually input the user name and password of this IP camera and click save then the image of the IP camera will appear in the channel User Admin amp 10 Network Video Recorder User Manual
16. Can select different week display status for the specified channel 5 OSD Position You can select any position for the OSD of the specified channel 6 Display Parameters Can set the brightness contrast saturation and hue for the specified channel 7 Video Format There are PAL and NTSC for selection 8 Copy To Copy the configuration parameters to other channels Video Parameters The setting parameters of every channel can be modified 1 Encoding Type Main Stream Normal Sub Stream Main Stream Event for selection 2 Stream Type Video Video amp Audio for selection 3 3 Resolution There are CIF QCIF 4CIF 2CIF main stream resolution types for selection 4 Bitrate Type Constant and Variable for selection 5 Frame Rate Select different value from the drop down list the default value is Full Frame 6 Video Quality Select different image quality as needed it is default to Highest 7 Copy To Copy the configuration parameters to other channels Schedule Record You can set different types of record plan for each channel 1 Enable Recording Tick the small box before Enable Recording will start recording 2 All Day Recording Tick the small box before All Day Recording to start all day recording then you can select schedule recording motion recording 14 Network Video Recorder User Manual alarm recording command recording etc 3 Record Time You can setup by 8 separ
17. Preface Attentions Welcome to use our network video recorder For your secure using please read this user manual carefully The following contents are about the proper use of the product the prevention of danger and loss of property etc Please be sure to abide 1 Installation Environment gt gt Please place and use this product in the environment with temperature 0 C 50 C The device should be placed horizontally when it is being installed and used avoid lean or inversion Do not place or install it in the high temperature wet dusty and sooty places Keep the device away from water drop or plash Don t put any object with liquid inside like flower vase or any other object on the device To ensure the normal heat dissipation of the device there is a fan installed inside the device The device should be installed in well ventilated environment The back of the DVR should be away from other devices or the wall above 6cm in order to release heat If the device is used in the regions with much thunder please install lightning protection device to avoid host or hardware breakdown by lightning stroke 2 Attentions f A Do not touttrtte power SW and the NVR by wet hands or wet objects in order to avoid electric shock After installing the host please make sure that the host and the chassis are connected to the ground in order to avoid video and audio signal interference and damaged by static electri
18. act our technical department for the latest programs and additional documentation gt If there is any doubt or dispute our company reserves the right of final explanation This user manual offer references to multi series products The specific operation of each product will not be listed one by one Please contact our technical department when you have any question Contents Chanter 1 Product ASTUCIA a 5 KERA SUNIA ad pi 5 1 2 Main Functions O PTOUUCE oooocccccccconoonccononononananonocnonanncnocononannnnnos 5 Chapter 2 Installation InSITUCION coccoocoonoononocococococononanananananononoss 6 2 1 Opertcase Inspeccion since ar a a e aN 6 22 RBB PSAN EE AN 6 Chapter 3 Local Operation GUIAE ooocooooooconcncccccccoccnannananancnonocococonanananonos T pr SS IA EEEE AO EAER T 32 VNEM LOs iras T 33 MENU OPEO oia an tia 8 Dei SUIT SUID e a desadhettasguseansedane 8 3 3 2 How to connect NVR with IP CameraAt first set IP camera parameter 8 399 DISDIEY OCIO siria A a hax 11 SSA PTZ SCI aida 11 AS MA ne 12 al PS AE EA 12 329 VSEN SUING ura al 13 3 3 5 1 Device ParaMetelS ooooocccoooooccccconoononnnnonononancnnnonononannnnnnnnconanns 13 3 3 5 2 Channel ParaMeters oooooooocconcnooooncanccnononanannnnnoconanannnnno conca 14 3 3 0 3 Network ParaMetels ccccoooooocncccnnoonnnancnccononanannnonononanananononos 16 3 3 5 4 Alam amp EOS iii cere 18 3 3
19. ate time periods 4 Advanced Settings You can set the prerecord time and post record time 5 Copy To Copy the configuration parameters to other channels Motion Detection The parameters of each channel can be modified 1 Area settings Select the motion detection area press the left mouse button and drag to the area which you want to set motion detection click OK 2 Alarm Schedule Set the time intervals of alarm 3 Linkage Select the linkage way which you need 4 Copy To Copy the configuration parameters to other channels Onvif protocol does not support above function Video Lost Can modify the parameters of each channel 1 Alarm Schedule Set the time intervals of alarm 2 Linkage Select the linkage way which you need 3 Copy To Copy the configuration parameters to other channels Onvif protocol does not support above function Video Tampering The parameters of each channel can be modified 1 Area settings Select the motion detection area press the left mouse button and drag to the area which you want to set motion detection click OK 2 Alarm Schedule Set the time intervals of alarm 3 Linkage Select the linkage way which you need 4 Copy To Copy the configuration parameters to other channels Onvif protocol does not support above function Video Mask The parameters of each channel can be modified 1 Area settings Select the motion detection area press the left mouse button a
20. city Ensure the voltage stability of the power supply of the NVR Use the power input with stable voltage value and little wave interference rather than shutdown the NVR by disconnecting the main switch directly Do not drop any liquid or metal on the NVR in case short circuit inside or fire The device does not include any hard disk and you need to properly install Network Video Recorder User Manual the hard disk before using it otherwise you cannot record and playback the video gt The dust on the mainboard will cause short circuit when it is damp In order to ensure the long term normal working you should regularly dedust the mainboard connectors chassis fan and so on by a brush gt Do not disconnect the power switch directly when you want to shutdown the NVR You should use the shutdown button on the panel in order to avoid damage to the hard disk gt The device system supports HDD format function If the HDD has been used please take note that if it is with FAT 32 format This NVR only supports HDD with FAT 32 format gt Do not open the device when it is connected with electricity gt To ensure the integrity of the recording data please replace the hard disk when it is damaged there is disk error record in the log information 3 Note gt The user manual is for reference only The real object is the standard gt The products will be updated at any time It is subject to update without notice gt Please cont
21. ck TMeye icon the above initialized interface will appear The functions of the buttons are as below Function Button Capture the current image the pictures 0 Snapshot are saved in the picture directory of the mobile phone by default setting port user name password and device cS gt P 1 Select to play the video of any channel of the device Coordinating with Control PTZ up down left and right 339 lt Network Video Recorder User Manual RIS Zoom Zoom in and zoom out Focal Length Increase or decrease the focal length DE S Iris Increase or decrease the iris 3 Use for the first time or need to modify the parameters please click Setting button to enter the parameter setting interface which as shown in the below picture Server Info Alias The name of the NVR which is used to M differentiate different devices Address 569 174 194 143 Address The public IP address or DDNS of the ee NVR User Info Port The server port of the NVR User ID Admin User ID The same as the user name on IE RAME sosenece Password The same as the password on IE Ca Return button 33 Network Video Recorder User Manual Chapter 6 Appendix 6 1 HDD Capacity Calculation Method for Reference Install the network video recorder for the first time please make sure whether the HDD is installed inside the host 6 1 1 The Capacity of the HDD The digital video recorder requires a si
22. ct Category 1 5U 4ch NVR 1 5U 9ch NVR 1 5U 16ch NVR ey ae Network Video Recorder User Manual Standard 1 5U Chassis Operating System Embedded LINUX operating system Image Code Standard H 264 MPEG4 AVC Image code quality adjustable variable bitrate and const Image Code Control ant1bitrate optional Recording Playback Any 4ch 1080P 720P playback simultaneously Quality l l Each screen can set detection areas and set 6 level Image Motion Detection BA sensitivity Every channel can set 4 cover regions Voice Talkback Two way voice talkback Support manual auto dynamic detection alarm trigger Recording Mode record mode Support U disk USB mobile HDD USB DVD RW Backup Way network storage and backup Recording Storage Local HDD network Video Input ops ich 10g0p 720P 2ch 1080P 720P 4ch 1080P l 4ch network audio 9 6 4ch network 16 12 9ch network Audio Input input audio input audio input 38 Network Video Recorder User Manual Local Login User name and password HDD Port 2 SATA HDD port 1 SATA 1 E SATA Power Supply 12V4A DC12V3 3A DC12V5A l l Support iPhone Windows Mobile BlackBerry Mobile Surveillance Symbian Android smart phone Power Consumption lt 25 without HDD 6 3 2 2U 720P 1080P Economic NVR Series Image Code Control Image code quality adjustable variable bitrate and con stant1bitrate optio nal Dual Stream Each channel can set main stream and sub stream Audio Compression G 7
23. ction 6 level sensitivity Every channel can set 4 cover regions Voice Talkback Two way voice talkback l Support manual auto dynamic detection alarm Recording Mode l trigger record mode Support U disk USB mobile HDD USB burner Backup Way DVD RW network storage and backup 41 Network Video Recorder User Manual lt 20W without HDD lt 40W without HDD 6 4 Trouble Shooting gt The device fails to start or keeps restarting Possible causes 1 NVR is upgraded with wrong program which has caused the damage of system software 2 The main board is defective please contact the supplier for maintenance 3 HDD is defective please replace the HDD gt Fail to operate the device by remote control Possible causes 1 Check if the batteries in the remote control are installed correctly especially the positive and negative polarity Check if the batteries in the remote control have power Check if the remote control window is covered Check if the remote address of the NVR matches the address of the remote control gt Fail to control PTZ Possible causes 1 Incorrect cable connection of the RS 485 port A B ports are connected oppositely 2 Incorrect settings of PTZ decoder type protocol baud rate and address bit 49 Network Video Recorder User Manual 3 The quantity of the PTZ connected to the RS 485 bus is relatively big which causes the signal reflection and you need to paralle
24. ection of the 485 control line etc After setting the parameters select the channel which you want to control in the preview interface then control the left handed rotation right handed rotation up regulation down regulation of the lens Zoom in and zoom out of the focal length zoom in and zoom out of the focal point Zoom in and zoom out of the iris setting of the PTZ speed 3 3 4 2 PTZ Setting 1 Preset setting first turn the camera to the needed position through the direction buttons of the PTZ control then select a preset number and click Settings button Preset call select a preset number which needs to be called and click Call button 2 Cruise setting select a cruise number click Settings as shown in the below interface Preset Residence Time Cruise Speed gt In the cruise setup interface select preset point cruise time cruise speed click Add button then the preset point of the cruise 1 CruiseTime 1 El CruiseSpeed 1 E path is added successfully MiS multi preset points can be added Click Delete button can delete the preset point of the cruise path gt Cruise call select a cruise number click Call button gt Cruise delete select a cruise number and click Delete button 3 Track setup select a track number and click Set button then start the PTZ control operations and then click Stop and the track is rem
25. embered successfully 4 Track call select a track number and click Call button De Network Video Recorder User Manual 3 3 5 System Setting EC Click EA and the below interface will show Device Name System Version RS485 Device ID DST Setting Channel Network Record Replace Device Type Device Serial No 013010106164a140041e Channel Number 32 Alarm Input Number 4 Alarm Output Number 4 HDD Number 8 Device Time 2013 1 7 13 39 30 Modify Cancel 3 3 5 1 Device Parameters Device Info Check and modify the basic information of the device System Version Check the basic information of the device system RS232 Can set RS232 serial port RS485 Can set the RS485 serial port DST Setting Tick DST check box then click the set button to set the start time and end time of DST Dvice Device Info System Version 8 Enable Daylight Saving Time Channel From Januartly 1th week Januart y E 1th week DST Bias 30minutes 1163 E Sun E Sun Cancel 18 is Network Video Recorder User Manual 3 3 5 2 Channel Parameters Display Settings The configuration parameter of every channel can be modified h Camera Name You can modify the name of the specified channel 2 Time Format You can select different time formats for the specified channel 3 Date Format You can select different date format for the specified channel 4 Display Week
26. ery Input the time interval needed to be adjusted Select Time Zone Select the time zone of different places GMT You can do fine adjustment of time Email Settings Setup E mail 1 2 3 Email Address Input the email address Password Input the email password PWD Confirm Confirm the password Liy Network Video Recorder User Manual 4 Receiver Input the email address and user name of the receiver 5 Interval Select the interval of sending email 6 SMTP Server Input the SMTP server address 7 Port Input the SMTP server port 3 3 5 4 Alarm amp Exception Alarm Input Setup alarm input 1 Alarm Schedule Set the time intervals of alarm 2 Linkage Select the way of linkage PTZ linkage select the channel number and the action for linkage preset patrol and pattern to the specified point and click ok 3 Copy Copy the configuration to the other channels 18 Network Video Recorder User Manual 3 3 5 5 Account Parameters Account Setting You can add user modify user set user authority delete user 1 Add User You can set user name password confirm password user type and bind the IP address 2 Modify User You can modify the user name password confirm password user type and bind the IP address 3 User Privilege You can setup the privilege of the new added user 4 Delete User Delete the new added user User Online View the user connected with the NVR logging
27. g time period the system will auto enable the record function Notice Please use the NVR matching power supply instead of any other power supply of any other type or brand 3 1 2 Shutdown System e Click click Shutdown Note this method is suggested when shutdown device in order to avoid damage to the device from electricity cut off by accident e Long press the power key on the front panel can shutdown the system the user should have shutdown authority Notice Before changing the HDD operation you should shutdown the device and cut the power supply first and then operate 3 1 3 Power Failure Recovery When the NVR is under the recording status if the system power is cut off or the device is shut down forcefully after reconnected with the power supply the NVR will auto save the video before cutting and auto recover to the previous status and continue to work 3 2 System Login After normal booting single click or press the OK key on the remote control to pop up the login dialog box user input the user name admin and password blank default to be blank in the input box Network Video Recorder User Manual 3 3 Menu Operation 3 3 1 Start Setup Click and the interface will display Y Shutdown Reboot Login 1 Shutdown Click Shutdown button the devic eeii elects 2 Reboot Click Reboot button the device will reboot 3 Click Login button to login the system User name admin pass
28. internet cable Click Star button on the left corner of computer gt Run gt Input CMD and click ENTER key gt Input ipconfig all and click ENTER key Then take note for the IP information 7 1 NVR setting 1 Start the NVR gt Click Setting icon to enter the setting menu gt Network Setting Device NIC Type 10M 100M 1000M Auto Channel W _ Netwrok Settings IP 192 168 1 108 DDNS Settings NTP Settings Email Settings Alarm Account Subnet Mask 255 255 255 0 System Remote Port 5050 Default Gateway 192 168 1 1 MAC 00 0C 69 E8 B4 30 HTTP Port 80 Multicast 255 255 1 0 El Enable Wi Fi f Enable 3G 3G Advance OK Cancel Click DDNS for setting a Dvice Enable DDNS NTP Setting Server Type 3322 Email Setting Server Name Port User Name Password Confirm Password Domain Cancel 1 The physical address can keep the same 2 IP address the IP must be the unique and cannot conflict with other host or workstation Eg 192 168 1 101 44 Network Video Recorder User Manual 3 Default Gateway be same with the LAN gateway eg 192 168 1 1 Subnet Mask 255 255 255 0 DNS Address be same with the LAN gateway a a o yg Device Port default number is 5050 can change as the necessary http Port default number is 80 can change as the necessary D Cell Phone Port 3 based on the device port number eg if the device port is 5050 then the cell phone port
29. ith each other rightly 6 2 2 Code Corresponding Operation of the Remote Control Press the STATUS DEV button on the remote control then input the NVR device number default device number is 255 It can be modified under Management Tools gt System Parameter The maximum device number which can be set is 255 Input the 3 digit device number on the remote control adding 0 in front if the number is not up to 3 digit then press the ENTER button 6 2 3 Turn on by Remote Control When the device is under the status of being selected by the remote control keep pressing POWER button on the remote control can turn off the device so that it will be under standby mode When the device is under the standby mode status of being selected flicking on the POWER button can turn on the device and enter normal working condition 6 2 4 Disable Remote Control Operation When the device is under the status of being selected by the remote control press the DEV button and the remote control will terminate the control on the NVR 6 2 5 Abnormity Check of Remote Control gt Check the positive and negative polarity of the batteries gt Check whether the power of the batteries has run out gt Check whether the remote control sensor is blocked gt Check whether there is fluorescent light being used in the nearby 6 3 Technical Data 6 3 1 1 5U 720P 1080P Economic NVR Series Series 1 58U720P 1080P Economic NVR Series Produ
30. l connect a 1200 electrical resistance in the far end 4 The RS 485 port of the main board is defective gt The preview image of the NVR is scratched Possible causes Video input format is not matched If the camera is with NTSC format while the NVR is with PAL format then the preview image will be scratched gt NVR playback image is scratched or fail to search the recording Possible causes 1 Program error please try to reboot the NVR 2 HDD data error caused by bad track and bad clusters please detect the HDD If the HDD is defective please replace the HDD 3 Hardware error of NVR please contact the supplier gt NVR cannot connect network Possible causes 1 Please check if the network physical connection is correct 2 Please check the NVR network parameter configuration 3 Please check if IP conflict exists in the network gt The download or backup recording video fail to play Possible causes 1 Player is not installed correctly 2 The file system error of the backup U disk or removable hard disk 3 Graphics speed up software whose version is above DX8 1 is not installed Chapter 7 DVR NVR IE Viewing Operation Instruction for ADSL Mode If customer connects with ADSL and need IE viewing please do the setting as the following 43 Network Video Recorder User Manual Equipments NVR 1 set computer that connected with LAN router internet cable Let DVR and computer both connect with
31. leted please close IE browser first before unzipping the installation package After installation finished then open the IE browser and input the domain name login with port number user name and password The default user name is admin and no password Then you will see the DVR monitoring image If you think the above operation is too difficult we suggest you use www aedvr com free domain name Client server of UPnP automatic DNS Do the following operation after the setting of 7 1 1 Write down the device series number Setting gt Device Parameter gt Device Info gt Device Series No 2 Enter Network Setting gt Click Advance gt Select Enable manage host amp Enable UPnP Manage host address www aedvr com Port 5050 save and login out Login www aedvr com by IE browser Port 81 User name admin no password Input device series number user name and password click OK then can see DVR monitoring image This method no need router setting and no need login domain name it s very easy and stable Appendix FAQ of NVR 1 Q Why Motion Detection Alarm Mask Alarm Video Alarm configuration setting is correct but fail to work 46 Network Video Recorder User Manual A The ONVIF protocols of IPC that connected with NVR do not support these functions now Q Why fail to search IPC A Maybe the NVR or IPC doesn t connect with the internet properly please test the internet connection by run PING command and
32. n 4 1 WEB Browser Operating Instruction 4 1 1 Network Connection Y Y Confirm the NVR correct access to the network Set the IP address subnet mask and gateway for the computer server and NVR Please allocate IP address in the same network segment if there is no router device in the network If there is router device you just need to set corresponding gateway and subnet mask For the network setting please refer to Settings gt Network Parameters Please make sure that the IP address setting is correct When the IP address setting is complete you can use the system own ping tool to check if the NVR is connected to the network correctly 4 1 2 AtciveX Control Installation and User Login and Logout Y When Login successfully then shows When the NVR accesses to the network correctly you can login and visit it through IE browser You can download and install IE ActiveX from NVR through the Internet Then input the IP address of the NVR in the IE browser port number 5050 user name and password then the below interface will pop up Digital Video Recorder More detail Network operation ways please goes to the Host Side po e AB Ao i totoon MA A e wi KA i Ce ay E Network Video Recorder User Manual Chapter 5 Mobile Viewing Operating Instruction This operation guide is about how to install and use the mobile softwares in the mobile phones with Android Blackberry windows mobile iPhone Symbia
33. n systems 5 1 Client Software Obtaining You can obtain the mobile surveillance client software from the CD or our technical department The corresponding client software of each system is as below MEYE_SB_S60_3rd sisx mobile surveillance client of the 3rd version of Symbian S60 system MEYE SB _S60_5rd sisx mobile surveillance client of the 5th version of Symbian S60 system MEYE_WM cab mobile surveillance client of Window system MEYE_Android apk mobile surveillance client of Android system MEYE_RIM rar mobile surveillance client of BlackBerry system Note iPhone uses TMeye downloaded from appstore 5 2 The Parameter Settings of the NVR which Supports Mobile Surveillance Resolution CIF or QCIF Frame Rate 5 10fps Stream Type Limited Stream 64 256Kb S Note you can adjust the settings according to the performance and network condition Mobile phone with higher performance and network condition will display better effect If the network condition is not good you can reduce the frame rate to ensure the fluency 25 Network Video Recorder User Manual 5 3 Android Mobile System The mobile client software supports version above 1 5 of Android system including HTC G1 HTC Magic HTC Hero HTC G5 and so on Installation and Operation Instruction 1 Copy the MEYE_Android apk to the mobile or download it from Google directly Click the program to install Click to run the program as shown in the
34. nd drag to the area which you want to set motion detection click OK 2 Copy To Copy the configuration parameters to other channels Onvif protocol does not support above function 15 Network Video Recorder User Manual 3 3 5 3 Network Parameters Network Settings The network basic parameters of the device can be modified 1 2 3 DON OO Ff oOo xw w xwx mH NIC Type there are different network card types for selections IP enter corresponding numbers to modify the IP address Obtain Auto Auto search IP function When open DHCP the IP Subnet Mask Default Gateway cannot be set If the current DHCP is valid then the IP Subnet Mask Default Gateway will show the value obtained by DHCP if the current DHCP is invalid IP address etc will show 0 Device Port Enter the corresponding device port Subnet Mask Enter the corresponding IP subnet mask Default Gateway Enter the corresponding gateway address MAC Display the MAC address current network port HTTP Port It is default to O Multicast Enter the corresponding multicast address Enable Wi Fi Tick the box before Enable Wi Fi and click Wi Fi and enter the following interface Refresh SSID Password W IP Obtain Auto Ei DNS Obtain Auto IP 192 168 1 189 First DNS 192 168 1 189 Subnet Mask 255 255 255 0 Second DNS 255 255 255 0 Default Gateway 192 168 1 1 Click Refresh and find the WiFi router and double click
35. ngle HDD with above 500GB capacity In order to obtain better stability we recommend the HDD with 500G 2TB Capacity 6 1 2 The Selection of the Total Capacity Calculate the total capacity of a NVR requires according to the recording requirement recording type recording file storage time Calculation method Step 1 Calculate the storage capacity q of a channel requires per hour according to the formula 1 Unit MByte q d 8 x 3600 1024 1 The Recording File The Recording File Bit Stream Size Size in One Hour Size in One Day d bitrate Unit Kbit s The following table shows the recording file size of the common bit rate under constant bit rate within one hour and one day for one channel 34 Network Video Recorder User Manual The second step after confirming the time requirement of recording calculate the storage capacity m one channel requires according to formula 2 unit MByte m q xh xD 2 h recording time of each day Hour D number of days of recording storage l For example the HDD capacity for recording one month for 1 channel 1 50M bit stream Unit GB mM 659x24x31 490296MB 478GB The third step the total capacity accumulating qT for 16 channels timing recording for a whole day Unit GB q q mM 16 7648GB If select 500G HDD 16 pieces of HDD will be required to full record User selects appropriate HDD according to the capacity The fourth step
36. nnonononanannnnnononanoss 31 Ao o AA uaa ein ynia eesti dotted 34 6 1 HDD Capacity Calculation Method for Reference oooooo 0 34 6 2 Remote Control OperatiON oocooooocoooocccccccccococonanaanananonocococonanananos 36 60 OCMC Dada 38 6 3 1 1 5U 720P 1080P Economic NVR Senes cccccoooooocccccccoconnnnnnono 38 6 3 2 2U 720P 1080P Economic NVR SeTeS ooooccccccccooooccccccononanannnonoos 39 6 3 3 1 5U 2U 1080P Professional NVR Serl8s ooooooooooccccccooonnonnoss 41 CATICUDE SIV COMING ias 42 Chapter 7 DVR NVR IE Viewing Operation Instruction for ADSL Mode 44 1 VOYR SUI i echt ais dial 44 FZ Router Mara 45 Lo E LOJN OPAOS ii E 46 APPEAR 47 Network Video Recorder User Manual Chapter 1 Product Instruction 1 1 Product Summary This device is a video coding and recording product specially designed for the video monitoring field combining with H 264 video compression large capacity HDD storage TCP IP network embedded Linux operating system and other various advanced electronic information technologies realizing high quality image and low bit rate recording features and favourable system stability The device meets the standard of GB 20815 2006 Video Security Surveillance Digital Video Device issued by the government This device has functions including recording playback and monitoring simultaneously realizing synchronous video and audi
37. o with advanced control technology and powerful network data transmission ability 1 2 Main Functions of Product The following functional characteristics will be different due to the different series of products and their different hardware versions e Real time Monitoring e Compression Processing Function e Recording Function e Video Playback and Backup e Camera Control e Alarm Management and Control e Communication Port e Network Function Network Video Recorder User Manual Chapter 2 Installation Instruction 2 1 Open case Inspection When you receive the product please check all the things according to the NVR packing list in the box 2 2 HDD Installation Installation Preparation Need one cross screwdriver This series of HDD NVR can install 2 to 8 pieces of HDD inside and the capacity of each HDD can be up to 2TB HDD Installation Steps e Twist off the screws on the side panel of the case and then open the cover of the chassis e Fix the HDD on the HDD screw whole sites of the baseboard with screws e Connect the HDD data cable and power cable e Cover the case fix it with screws Network Video Recorder User Manual Chapter 3 Local Operation Guide 3 1 Start Shutdown System 3 1 1 Start System Plug power cable press power switch the power led will be on and the NVR will start After booting the video output default to multi window output mode If the booting time is within the record settin
38. roup Can select the channel of next group B7 AR Select Channel Select to play the video of any channel of the DA device PTZ Control Control PTZ up down left and right Zoom Zoom in and zoom out Focal Length Increase or decrease the focal length Iris Increase or decrease the iris 28 Network Video Recorder User Manual 5 5 Symbian Mobile System Mobile client supports symbian system version above 9 1 namely symbian 3rd and 5th version mobile including all the 3rd version like Nokia 6120c e7 1 5800 with 240 320 320 240 resolution the 5th version with 360 640 640 360 resolution yx Installation and Operation Instruction 1 Download and Install the package file sisx in the phone and then you will ind the program icon and find the vmeye in the specified directory 2 Click the vmeye program icon After running the program the below initialized interface will appear The functions of the buttons are as below as Name Function Description Button Program connects the device and start to Pla l play the video r Capture the current image the pictures are Snapshot saved in the picture directory of the mobile phone by default l Set IP address of the NVR or DDNS port Setting l user name password and device name B Next Group Can select the channel of next group Sia Select to play the video of any channel of the elec device Coordinating with the Next Group Channel you can switch to 8ch or
39. word blank by default 4 Lock Click Lock the menu will be locked 3 3 2 How to connect NVR with IP Camera At first set IP camera parameter This device supports multi version Onvif protocols compatible with main brand IP cameras Take below brands as example AXISA SONY Panasonic SANYO BOSCH e CFADOCTE i i ustream Gen TEE Za B AE Aevisioni HIKVISION Mhua Ga Before connect the IP camera with NVR please make sure that the IP addresses of the IP camera and the NVR are in a same network section and the main stream and sub stream are adjusted to be the suggested values main stream 2048k sub stream 512k otherwise these problems may appear the NVR cannot search the IP camera the image cannot be connected the image is not fluent the image quality is bad and so on Connect the NVR with the network cable and the switch in the LAN After 10 booting click and enter the system configure interface to set the network parameters including the IP address subnet mask network gateway of the NVR User can run the command ping through the PC in the LAN to ping the IP of the NVR to see if the NVR has connected with the LAN Network Video Recorder User Manual Device Channel NIC Type 10M 100M 1000M Auto Netwrok i Netwrok S s IP 192 168 1 108 DDNS Settings NTP Sens Remote Port 5050 Email Settings Alarm Account Subnet Mask 255 255 255 0 System Default Gateway 192 168 1 1 MAC 00 0C 69 E8
Download Pdf Manuals
Related Search