User Manual PCIE-1730 - download.advantech.com
Contents
1. DIS DIIS DOO DO DOS DO15 c Exe GND 45V 12V DIO DU 1010 DI Tolain Connector Box Hander 20 Pin 2 IDI O Box Hander 20 Pin 2 DI O 19 PCIE 1730 User Manual AD ANTECH eAutomation www advantech com Please verify specifications before quoting This guide is intended for reference purposes only All product specifications are subject to change without notice No part of this publication may be reproduced in any form or by any means electronic photocopying recording or otherwise without prior written permis sion of the publisher All brand and product names are trademarks or registered trademarks of their respective companies O Advantech Co Ltd 20122. User Manual PCIE 1730 32 ch Isolated Digital I O PCI Express Card AD ANTECH eAutomation Copyright The documentation and the software included with this product are copyrighted 2012 by Advantech Co Ltd All rights are reserved Advantech Co Ltd reserves the right to make improvements in the products described in this manual at any time without notice No part of this manual may be reproduced copied translated or transmitted in any form or by any means without the prior written permission of Advantech Co Ltd Information provided in this manual is intended to be accurate and reliable How ever Advantech Co Ltd assumes no responsibility for its use nor for any infringe ments of the rights of third parties which may result from its use Acknowledgements Intel and Pentium are trademarks of Intel Corporation Microsoft Windows and MS DOS are registered trademarks of Microsoft Corp All other product names or trademarks are properties of their respective owners Product Warranty 2 years Advantech warrants to you the original purchaser that each of its products will be free from defects in materials and workmanship for two years from the date of pur chase This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech or which have been subject to misuse abuse accident or improper installation Advantech assumes no liability unde
3. Discard used batteries according to the manufacturer s instructions Document Feedback To assist us in making improvements to this manual we would welcome comments and constructive criticism Please send all such in writing to support advan tech com Safety Instructions 1 2 3 10 11 12 19 14 15 16 17 Read these safety instructions carefully Keep this User Manual for later reference Disconnect this equipment from any AC outlet before cleaning Use a damp cloth Do not use liquid or spray detergents for cleaning For plug in equipment the power outlet socket must be located near the equip ment and must be easily accessible Keep this equipment away from humidity Put this equipment on a reliable surface during installation Dropping it or letting it fall may cause damage The openings on the enclosure are for air convection Protect the equipment from overheating DO NOT COVER THE OPENINGS Make sure the voltage of the power source is correct before connecting the equipment to the power outlet Position the power cord so that people cannot step on it Do not place anything over the power cord All cautions and warnings on the equipment should be noted If the equipment is not used for a long time disconnect it from the power source to avoid damage by transient overvoltage Never pour any liquid into an opening This may cause fire or electrical shock Never open the equipment For safet
4. unpack ing and step by step procedures for both driver and card installation Unpacking After receiving your PCIE 1730 package please inspect its contents first The pack age should contain the following items W PCIE 1730 card B Companion CD ROM B User s Manual The PCIE 1730 card harbors certain electronic components vulnerable to electro static discharge ESD ESD could easily damage the integrated circuits and certain components if preventive measures are not carefully paid attention to Before removing the card from the antistatic plastic bag you should take following precautions to ward off possible ESD damage W Touch the metal part of your computer chassis with your hand to discharge static electricity accumulated on your body Or one can also use a grounding strap B Touch the anti static bag to a metal part of your computer chassis before open ing the bag W Take hold of the card only by the metal bracket when removing it out of the bag After taking out the card first you should Inspect the card for any possible signs of external damage loose or damaged com ponents etc If the card is visibly damaged please notify our service department or our local sales representative immediately Avoid installing a damaged card into your system Also pay extra caution to the following aspects to ensure proper installation B q Avoid physical contact with materials that could hold static electricity such as plastic
5. vinyl and Styrofoam m Whenever you handle the card grasp it only by its edges DO NOT TOUCH the exposed metal pins of the connector or the electronic components Note Keep the anti static bag for future use You might need the original bag to store the card if you have to remove the card from PC or transport it El elsewhere PCIE 1730 User Manual 6 2 3 2 4 Driver Installation We recommend you to install the driver before you install the PCIE 1730 card into your system since this will guarantee a smooth installation process The Advantech device driver installation for the PCIE 1730 card is included on the companion CD ROM that is shipped with your DA amp C card package Hardware Installation Note Make sure you have installed the driver first before you install the card After the device driver installation is completed you can now go on to install the PCIE 1730 card in any PCI Express slot on your computer Follow the steps below to install the card on your system 1 Turn off your computer and unplug the power cord and cables TURN OFF your computer before installing or removing any components on the computer 2 Remove the cover of your computer 3 Remove the slot cover on the back panel of your computer 4 Touch the metal part on the surface of your computer to neutralize the static electricity that might be on your body 5 Insert the PCIE 1730 card into a PCI Express slot Hold the card only by its ed
6. 1 Printed in Taiwan November 2012 PCIE 1730 User Manual ii Declaration of Conformity CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring We recommend the use of shielded cables This kind of cable is available from Advantech Please contact your local supplier for ordering information CE This product has passed the CE test for environmental specifications Test conditions for passing included the equipment being operated within an industrial enclosure In order to protect the product from being damaged by ESD Electrostatic Discharge and EMI leakage we strongly recommend the use of CE compliant industrial enclo sure products FCC Class B Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installa tion This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful inter ference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interfer ence to radio or television reception which can be determined by turning the equip ment off and on the user is encouraged to try
7. IDI 10 IDI 12 IDI 14 ECOMO ECOMO DIO DI 2 DI 4 DI 6 DI 8 DI 10 DI 12 DI 14 GND NC IDI 0 IDI 2 IDI 4 IDI 6 IDI 8 IDI 10 IDI 12 IDI 14 ECOMO PCOMO IDO 0 IDO 2 IDO 4 IDO 6 IDO 8 IDO 10 IDO 12 IDO 14 PCOM1 11 CN2 1 2 IDI 1 3 4 IDI 3 5 6 IDI 5 7 8 IDI 7 9 10 IDI 9 11 12 IDI 11 13 14 DI 13 15 16 DI 15 17 18 ECOMI 19 20 ECOMI CN4 1 2 DI 1 3 4 DI 3 5 6 DI5 7 8 DI 7 9 10 DI9 11 12 DI 11 13 14 DI13 15 16 DI15 17 18 GND 19 20 NC CN6 nn IDI 1 2 21 IDI 3 3 22 DI5 4 23 DI7 5 24 DI9 6 25 IDI 11 7 26 DI 13 8 27 DI 15 9 28 ECOM1 10 29 EGND 11 30 IDO 1 12 31 IDO3 13 32 IDO5 14 33 DO7 15 34 IDO9 16 35 IDO 11 17 36 DO 13 18 37 IDO 15 he PCIE 1730 User Manual TTL level Digital Input Output The PCIE 1730 has 16 TTL level digital inputs and 16 TTL level digital outputs The following figure shows connections to exchange digital signals with other TTL devices TTL Device PCIE 1730 oe Figure 3 2 TTL level DI O Connection If you want to receive an OPEN SHORT signal from a switch or relay See the figure below Internal 5V External 10 kOhm DI Switch eG Figure 3 3 Open Short Connection PCIE 1730 User Manual 12 Isolated Digital Input Each of the 16 isolated digital input channels accept voltages from 5 to 30 V Every eight input channels share one external commo
8. Table 3 1 Summary of Jumper Settings Names of Function description Jumpers JP2 1 2 short Output channels will keep last status after system resets JP2 2 3 short Output channels will set their values to Low after system resets Default Table 3 2 Board ID setting SW1 ID3 ID2 ID1 IDO Board ID 1 1 1 1 0 1 1 1 0 1 1 1 0 1 2 1 1 0 0 3 1 0 1 1 4 1 0 1 0 5 1 0 0 1 6 1 0 0 0 7 0 1 1 1 8 0 1 1 0 9 0 1 0 1 10 0 1 0 0 11 0 0 1 1 12 0 0 1 0 13 0 0 0 1 14 0 0 0 0 15 Note On 1 Off 0 PCIE 1730 User Manual 10 3 3 Signal Connections PCIE 1730 Pin Assignments CN1 IDOO 1 2 IDO 1 IDO 2 3 4 IDO 3 IDO 4 5 6 IDO 5 IDO 6 7 8 IDO 7 IDO 8 9 10 IDO 9 IDO 10 11 12 IDO 11 IDO 12 13 14 IDO 13 IDO 14 15 16 IDO 15 EGND 17 18 EGND NC 19 20 NC CN3 DOO 1 2 DO 1 DO2 3 4 DO3 DO 4 5 6 DO 5 DO 6 7 8 DO 7 DO 8 9 10 DO 9 DO 10 31 12 DO 11 DO 12 13 14 DO 13 DO 14 15 16 DO 15 GND 17 18 GND NC 19 20 NC CNS EGND 1 2 EGND Description of pin use IDIn n 0 15 Isolated digital input IDOn n 0 15 Isolated digital output ECOMNn n 0 1 External common Vcc GND of IDI PCOM n 0 1 Free wheeling common diode for IDO EGND External ground for IDO NC Not Connected Din n 0 15 TTL Digital input DOn n 0 15 TTL Digital output GND TTL Digital ground IDI 0 IDI 2 IDI 4 IDI 6 IDI 8
9. boards 5 Mice and other pointing devices Monitors 3 Multi port serial adapters 88 Network adapters Ports COM amp LPT 8 Processors Sound video and game controllers Se Storage volumes System devices Figure 2 1 Device Manager Note Ifyour card is properly installed you should see the device name of your card listed on the Device Manager tab If you do see your device name listed on it but marked with an exclamation sign it means your card has not been correctly installed In this case remove the card device from the Device Manager by selecting its device name and press the Remove button Then go through the driver installation process again After your card is properly installed on your system you can now configure your device using the Advantech Navigator after you install DAQNavi on your computer PCIE 1730 User Manual 8 Chapter 3 Signal Connections 3 1 Overview Maintaining signal connections is one of the most important factors in ensuring that your application system is sending and receiving data correctly A good signal con nection can avoid unnecessary and costly damage to your PC and other hardware devices This chapter provides useful information about how to connect input and output signals to the PCIE 1730 via the I O connector 3 2 Switch and Jumper Settings I QUUD Figure 3 1 Card Connector Jumper and Switches
10. ers build their system with multiple PCIE 1730 cards With correct Board ID settings you can easily identify and access each card during hardware configuration and software programming Reset Protection When the system has undergone a hot reset i e without turning off the system power the PCIE 1730 can either retain outputs values of each channel or return to its default configuration as open status depending on its on board jumper setting This function protects the system from wrong operations during unexpected system resets Note For detailed specifications of the PCIE 1730 refer to Appendix A Spec ifications B Applications Industrial ON OFF control Switch status sensing BCD interfacing Digital I O control Industrial and lab automation Laboratory amp Education Installation Guide Before you install your PCIE 1730 card please make sure you have the following necessary components PCIE 1730 card PCIE 1730 User s Manual Advantech driver DAQNavi included in the CD ROM Wiring cable PCL 10137 option Wiring board PCLD 880 ADAM 3937 option Personal computer or workstation with a PCI Express bus slot Some other optional components are also available for enhanced operation W Application software Advantech Navigator Utility offered by DAQNavi soft ware After you get the necessary components and maybe some of the accessories for enhanced operation of your card you can then begin the Instal
11. ges and carefully align it with the slot Insert the card firmly into place Use of excessive force must be avoided otherwise the card might be damaged 6 Fasten the bracket of the PCI Express card on the back panel of the computer 7 Connect appropriate accessories to the PCI Express card 8 Replace the cover of your computer chassis Re connect the cables you removed in step 2 9 Plug in the power cord and turn on the computer Note In case you installed the card without installing the Device Drivers first Win95 98 ME will recognize your card as an unknown device after E rebooting and will prompt you to provide the necessary driver Ignore the prompting messages just click the Cancel button and set up the driver according to the steps described in 2 3 Driver Installation 7 PCIE 1730 User Manual After the PCIE 1730 card is installed you can verify whether it is properly installed on your system through the Device Manager 1 Access the Device Manager through Control Panel System Device Manager 2 The device name of the PCIE 1730 should be listed on the Device Manager tab as follows Device Manager File Action View Help amp R ADVANTEC C7C461 mp ES PCIE 1730 32 ch isolated DI DO card Advantech IAG Onboard Devices Bl Advantech UNO DIO Device Computer Disk drives 3 Display adapters g Human Interface Devices 3 IDE ATAJATAPI controllers amp IEEE 1394 Bus host controllers gt Key
12. he power from your PC chassis before you work on it Don t touch any components on the CPU card or other cards while the PC is on Disconnect power before making any configuration changes The sudden rush of power as you connect a jumper or install a card may damage sensitive elec tronic components V PCIE 1730 User Manual PCIE 1730 User Manual vi Contents Chapter 1 dd Oo O1 B ND Chapter 2 Chapter 3 3 1 3 2 3 3 Appendix A A 1 Appendix B B 1 Overview eene 1 Introduction PERRO TTE 2 Features iii et an en hen a i raa id e xa SER Rude rae ta 2 Applications 3 Installation Guide dans anna 3 Software Overview 4 ACCOSSOMOS ri rale n 4 Hardware Installation 5 Installation uch ua nn 6 UNPACKING EE 6 Driver Installation ss 7 Hardware Installation ettet anal 7 Figure 2 1 Device Manager 8 Signal Connections 9 eua sie 10 Switch and Jumper Settings nnn 10 Figure 3 1 Card Connector Jumper and Switches 10 Table 3 1 Summary of Jumper Settings 10 Table 3 2 Board ID setting SW1 sene nennnne nunne sense 10 Signal Connections mcdio rar HIR EIE HR DOG DEG a dE tue rius 11 Figure 3 2 TTL level DI O Co
13. lation procedures 3 PCIE 1730 User Manual 1 5 Software Overview Advantech offers device drivers SDKs third party driver support and application software to help fully exploit the functions of your PCIE 1730 card All these software packages are available on the companion CD ROM or you can browse Advantech website to get the latest update http www advantech com 1 6 Accessories Advantech offers a complete set of accessory products to support the PCIE 1730 card These accessories include Wiring Cable The PCL 10137 shielded cable is specially designed for PCIE 1730 cards to provide high resistance to noise To achieve better signal quality the signal wires are twisted in such a way as to form a twisted pair cable reducing cross talk and noise from other signal sources Furthermore its digital lines are separately sheathed and shielded to neutralize EMI EMC problems Wiring Boards The ADAM 3937 is a 37 pin D type wiring terminal module for DIN rail mounting This terminal module can be readily connected to the Advantech PC Lab cards and allow easy yet reliable access to individual pin connections for the PCIE 1730 card The PCLD 880 is a universal screw terminal board to be used with any of the PC LabCards which have 37 pin D type connectors PCIE 1730 User Manual 4 Chapter 2 Hardware Installation 2 1 2 2 Installation This chapter gives users a package item checklist proper instructions about
14. n Channels 0 7 use ECOMO Channels 8 15 use ECOM1 The following figure shows how to connect an exter nal input source to the card s isolated inputs External Internal Wet gt IDIO contact ECOM Isolated Circuit Qe Qe Dry Contact A No I I Figure 3 4 Isolated DI Connection Isolated Digital Output If the external voltage source 5 40 V is connected to each isolated output channel IDO and its isolated digital output turns on 500 mA max ch the card s current will sink from the external voltage source CN5 provides two EGND pins for IDO connec tion The following figure shows how to connect an external output load to the card s isolated outputs Internal External Diode e CY gt PCOM C Common gt Opoo gt H L E RES DS NO IDO anes IDO2 Relay IDO3 T IDO4 IDO5 VER IDO6 CD 5 40V L Oiboz e EGND Figure 3 5 Isolated Digital Output Connection 13 PCIE 1730 User Manual PCIE 1730 User Manual 14 Appendix A Specifications A 1 Specifications A 1 1 PCIE 1730 Isolated Digital Input Input Channels 16 Input Voltage Logic 0 3 V max 0 Vpc min Logic 1 10 V min 30 Voc max Input Current 12 Voc 3 18 mA 24 Vpc 6 71 mA Interrupt Capable Ch 2 IDIO IDI8 Isolation Protection 2 500 Vpc Overvol
15. nnection 12 Figure 3 3 Open Short Connection 12 Figure 3 4 Isolated DI Connection 13 Figure 3 5 Isolated Digital Output Connection 13 Specifications 15 Specifications una ia a ak 16 ATA POIENI O 5i ae eet aaa 16 Block Diagram 17 POIE 1 SQ so 18 vii PCIE 1730 User Manual PCIE 1730 User Manual viii Chapter 1 Overview 1 1 1 2 Introduction The Advantech PCIE 1730 is a 32 channel isolated digital input output card for the PCI Express bus The PCIE 1730 s isolated digital input channels are ideal for digital input in noisy environments or with floating potentials The following sections of this chapter will provide further information about features installation guide together with some brief information on software and accessories for the PCIE 1730 card Features PCIE 1730 32 isolated DIO channels 16 inputs and 16 outputs 32 TTL level DIO channels 16 inputs and 16 outputs High output driving capacity with 500 mA per channel maximum High voltage isolation on isolated I O channels 2 500 Vpc Interrupt handling capability Two 20 pin connectors for isolated DI O channels and two 20 pin connectors for TTL DI O channels D type connector for isolated input and output channels High ESD protection 2 000 Vpc High over voltage protection 70 Vpc Wide inpu
16. r the terms of this warranty as a consequence of such events Because of Advantech s high quality control standards and rigorous testing most of our customers never need to use our repair service If an Advantech product is defec tive it will be repaired or replaced at no charge during the warranty period For out of warranty repairs you will be billed according to the cost of replacement materials service time and freight Please consult your dealer for more details If you think you have a defective product follow these steps 1 Collect all the information about the problem encountered For example CPU speed Advantech products used other hardware and software used etc Note anything abnormal and list any on screen messages you get when the problem OCCUIS 2 Call your dealer and describe the problem Please have your manual product and any helpful information readily available 3 f your product is diagnosed as defective obtain an RMA return merchandize authorization number from your dealer This allows us to process your return more quickly 4 Carefully pack the defective product a fully completed Repair and Replacement Order Card and a photocopy proof of purchase date such as your sales receipt in a shippable container A product returned without proof of the purchase date is not eligible for warranty service 5 Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer Edition
17. t range 10 30 Vpc Board ID to identify specific card when multiple devices are installed The Advantech PCIE 1730 offers the following main features Robust Protection The PCIE 1730 digital input channels feature robust isolation protection for industrial lab and machinery automation applications It durably withstands voltage up to 2 500 Voc preventing your host system from any incidental harm If connected to an exter nal input source with surge protection the PCIE 1730 can offer up to a maximum of 2 000 Vpc ESD Electrostatic Discharge protection Even with an input voltage rising up to 70 Vpc the PCIE 1730 can still manage to work properly albeit only for a short period of time Wide Input Range The PCIE 1730 has a wide range of input voltage from 10 to 30 Vpc and is suitable for most industrial applications with 12 Vpc or 24 Vpc input voltage Plug and Play Function The PCIE 1730 is a Plug and Play device which fully complies with PCI Express Specification Rev V1 0 During card installation there is no need to set jumpers or DIP switches Instead all bus related configurations such as base I O address and interrupt are automatically done by the Plug and Play function PCIE 1730 User Manual 2 1 3 1 4 Board ID The PCIE 1730 has a built in DIP Switch that helps define each card s ID when multi ple PCIE 1730 cards have been installed on the same PC chassis The board ID set ting function is very useful when us
18. tage Protection 70 Voc ESD Protection 2 000 Voc Opto Isolator Response 50 HS Isolated Digital Output Output Channels 16 Output Type Sink NPN Isolation Protection 2 500 Vpc Output Voltage 5 40 VpC Sink Current 500 mA max channel Opto isolator Response 50 us Note Note when a inductance load is connected the maximum output volt E age will be 24 Voc Non isolated Digital Input Output Input Channels 16 Input Voltage Low 0 8 V max High 2 0 V min Output Channels 16 Output Voltage Low 0 5 V max 24 mA sink High 2 4 V min 15mA source General I O Connector Type 37 pin D Sub female Dimensions 175 mm x 100 mm 6 9 x 3 9 Power Consumption Typical 3 3 V 280 mA 12 V 330 mA Max 3 3 V 420 mA 12V 400 mA Temperature Operation 0 60 C 32 140 F refer to JEC 68 2 1 2 Storage 25 85 C 4 185 F Relative Humidity 5 95 RH non condensing refer to JEC 68 2 3 Certification CE certified PCIE 1730 User Manual 16 Appendix B Block Diagram B 1 PCIE 1730 Xilinx SPARTAN 6 PCIE 1730 User Manual us Control Bus Data Bus Control Logic Interrupt Control Logic 18 TDIO TDT IDI8 IDI15 IDON 1D07 IDOS IDO15 ECOM PCOM EGND DIO DI
19. to correct the interference by one or more of the following measures W Reorient or relocate the receiving antenna B Increase the separation between the equipment and receiver B Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Mm Consult the dealer or an experienced radio TV technician for help Technical Support and Assistance 1 Visit the Advantech web site at www advantech com support where you can find the latest information about the product 2 Contact your distributor sales representative or Advantech s customer service center for technical support if you need additional assistance Please have the following information ready before you call Product name and serial number Description of your peripheral attachments Description of your software operating system version application software etc A complete description of the problem The exact wording of any error messages iii PCIE 1730 User Manual Warnings Cautions and Notes Warning Warnings indicate conditions which if not observed can cause personal injury Caution Cautions are included to help you avoid damaging hardware or losing data e g A There is a danger of a new battery exploding if it is incorrectly installed Do not attempt to recharge force open or heat the battery Replace the battery only with the same or equivalent type recommended by the man ufacturer
20. y reasons the equipment should be opened only by qualified service personnel If one of the following situations arises get the equipment checked by service personnel The power cord or plug is damaged Liquid has penetrated into the equipment The equipment has been exposed to moisture PCIE 1730 User Manual iv 18 19 20 21 22 29 The equipment does not work well or you cannot get it to work according to the user s manual The equipment has been dropped and damaged The equipment has obvious signs of breakage DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE MAY GO BELOW 20 C 4 F OR ABOVE 60 C 140 F THIS COULD DAMAGE THE EQUIPMENT THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT CAUTION DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER S INSTRUCTIONS The sound pressure level at the operator s position according to IEC 704 1 1982 is no more than 70 dB A Safety Precaution Static Electricity DISCLAIMER This set of instructions is given according to IEC 704 1 Advantech disclaims all responsibility for the accuracy of any statements contained herein Safety Precaution Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage To avoid electrical shock always disconnect t
Download Pdf Manuals
Related Search