Home

Downloading

1. O 0 do Ep POWER ON STANDBY ON Press to turn the unit On and go into Standby mode To completely turn Off the unit you must unplug the AC power cord Playback control buttons Control the playback of pictures music videos and DVD players when user is viewing content from c
2. Wide Zoom Normal Displays a 4 3 picture at its original size z Removes the black bars on the side of 4 3 TV broadcasts This action oom ES ERA will cause minimal distortion on the screen Wide Displays a 4 3 picture that is stretched horizontally and vertically Cinema Scales 4 3 picture format to 16 9 Other than DTV and HDMI connected devices enlarges the picture Auto to best fit the screen DTV and HDMI connected devices display the picture at its original size The subtitles may remain visible For PC Input signal This unit can also be connected to your PC that has a DVI terminal Use an HDMI DVI conversion cable for this Video connection and it requires Stereo mini 3 5mm plug Audio cable for Analog Audio signal as well Refer to 16 9 video signal on this page if PC has HDMI Output I TV screen information You can display the currently selected channel or other information such as the aspect ratio on the TV screen In the Digital mode the detailed broadcasting information for the current off the air channel such as program title and program guides are displayed 1 Press 1 INFO N Sesame Street G Rating information TV Y 0000 program title for DTV only child lock rating Child lock mb p
3. Enelen 22 a VGA connection USB Memory Stick This unit is equipped with a PC Input jack If you connect this unit to pestis This unit offers easy playback of picture music and movie files your PC you can use this unit as a PC monitor Insert the USB Memory Stick into the USB terminal shown below USB im p 27 Use a VGA cable for this Video connection and it requires a Stereo min 3 5mm plug Audio cable for Analog Audio signal as well For 32PFL5708 F7 and 39PFL5708 F7 OUT The unit recognizes only a USB Memory Stick Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit Not supported A USB Memory Stick is always inserted to this unit directly A USB Memory Stick is not supplied with this unit We do not guarantee that all USB Memory Sticks can be supported by this unit Be sure to keep a backup copy of the original files on your device before you play them back on this unit We have no responsibilities for damage or loss of your stored data To protect your USB Memory Stick files from being erased place the write protect slid ing tab in the protect position When you are ready to remove a USB Memory Stick set the unit to go into Standby mode to avoid any damage to your data and the unit A USB Memory Stick that requires its own driver or the device with a special system such as fingerprint
4. press OK repeatedly to switch between view and block Use A Y to select Child lock then press OK e Kx indicates that the channel or Input Source is locked indicates that the channel or Input Source is not locked 1 2 al Pict p Component Reset AV amp features 3 Use the NUMBER buttons to enter the 4 digit numbers for your PIN code When you have not set up your PIN code enter 0 0 0 0 US TV and movie ratings Movie ratings lock is the rating system created by MPAA TV ratings lock has controlled access to individual programs based on their age ratings and content rating 1 Use A Y to select US movie ratings lock or US TV ratings lock Enter PIN then press OK 2 Use A Y to select the desired rating then press OK repeatedly to i switch between view and block Bd indicates that the rating is locked indicates that the rating is not locked BACK pum f HH PIN Code 5 Back When the PIN code is correct Child lock menu is displayed See the following description for setting each item Button lock Block unrated TV i Channel lock US movie ratings lock US TV ratings lock Canadian English rating Canadian French rating Change PIN i Region ratings lock Reset region ratings lock Note When you select the higher rating and set it to IX the lower ratings will be blocked automatically When you set the All to _ all ratings return to _
5. Ifyou have forgotten your PIN code enter 9999 to reset the PIN code Caption settings Closed Captioning displays the Audio portion of programming as text superimposed over the video 1 Press fi MENU to display Home Menu and use A W to select Features then press OK Use A Y to select Caption settings then press OK Caption control Use A V to select then select CC Off CC On or CC on w mute then press OK A Analog captions Use A W to select then select the desired caption from CC1 CC4 or Text1 Text4 press OK This option is only available in ATV and CVBS CC1 and The primary caption and text services The captioning or text is Text displayed in the same language as the program s dialog up to 4 oe lines of script on the TV screen CC3 and Serve as the preferred data channels Text3 The captioning or text is often a secondary language Rarely available and broadcasters use them only in special conditions such as when CC1 and CC3 or Text1 and Text3 are not available CC2 CCA There are 3 display modes according to programs Text2 and Paint on Text4 Displays input characters on the TV screen immediately Once characters are stored in memory they are Pop on displayed all at once Displays the characters continuously by scrolling max Roll up 4 lines 25 a Digital captions Use 4 Y to select then select the desired digital caption serv
6. a Blu ray disc DVD recorder eUu ue Rus y A e The unit accepts 480i 480p 720p and 1080i p of video signals for this connection Digital Audio Output Connection If you connect this unit to an external Digital Audio device you can enjoy multi channel Audio like 5 1ch Digital broadcasting sound Use a Digital Audio coaxial cable or Digital Audio optical cable to con nect the unit to external Digital Audio devices For 32PFL5708 F7 and 39PFL5708 F7 Aol aR O a Digital home theater amplifer e Digital Audio coaxial cable j Digital home theater amplifer al PC connection HDMI connection This unit can be connected to your PC that has a HDMI terminal Use an HDMI cable for this Digital connection For 32PFL5708 F7 and 39PFL5708 F7 HDMI cable HDMI DVI connection This unit can be connected to your PC that has a DVI terminal Use an HDMI DVI conversion cable for this Video Digital connection and it requires Stereo mini 3 5mm plug Audio cable for Analog Audio signal as well i i For 32PFL5708 F7 and 39PFL5708 F7 PC OUT OUT Ln 077 LCR Az a INE VEZ ESOS OUT ESTOS ade
7. 23 channel number Input mode Switching channels m p 15 Watching channels from an external device mb p 16 audio language DTV audio mode Analog TV Sound mb p 20 O program s image aspect ratio Changing picture format mb p 16 CC not available if Closed Caption is set to Off Caption settings mb p 25 N Press 2 INFO to hide the information Note While the program guide is displayed the Closed Caption function is interrupted The information display will automatically disappear in 5 seconds Fog ib bog 5 Use more of your TV a gt P 22 Adjusting the Closed Caption parental guide and some other useful functions This section describes the overview of the Setup menu displayed when you press fp MENU and use A Y b to select Setup The Setup menu consists of the function setting tems below 1 Press Pe MENU to display Home menu USB Ma p 27 Your TV is fitted with a USB connection that enables you to view photos listen to music or watch videos stored on a USB memory stick 4 When the setting is completed press t MENU or 33 BACK to 2 Use A Y to select Setup then press OK exit 3 Use A Y to select the desired menu and an item then press OK or use d gt to determine the setting Picture Settings assistant Before you begin Auto picture 3 You must set Home in Location mb p 26 Brightness Otherwise personalized picture and sound settings wi
8. automatically Region ratings lock will be available when the unit receives a Digital broadcast using the new rating system To block any inappropriate programs set your limits in US TV ratings lock US movie ratings lock and Region ratings lock 24 Canada English or Canada French ratings You can select the rating for Canada English or Canada French broadcasting 1 2 Use A Y to select Canada English ratings or Canada French ratings then press OK Use A Y to select the desired rating then press OK repeatedly to switch between view and block indicates that the rating is locked E indicates that the rating is not locked tl Locked all ratings E Exempt program C For all children C8 For children over 8 All All ratings locked including no rating 7 G General audience NR None No rating 8ans Unsuitable for ages under 8 TV Y Appropriate for all children PG Parental guidance suggested TV Y7 Appropriate for all children 7 and older 13ans Unsuitable for ages under 13 G TV G General audience 14 Unsuitable for ages under 14 PG TV PG Parental guidance suggested 16ans Unsuitable for ages under 16 PG 13 Unsuitable for children under 13 18 18ans Adult audience only TV 14 Unsuitable for children under 14 R y Restricted under 17 requires accompanying parent or adult gua
9. noise or disturbance of the picture and or sound may be generated if the unit is placed too close to them In this case please ensure enough space between the external devices and the unit Do not insert the AC power cord into the power socket outlet before all the connections are made Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power Before you move the TV disconnect attached cables to prevent damage to connectors Be sure to unplug the AC power cord from the AC outlet before moving or carrying the unit Regulatory notices Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning pulling standing or climbing on it A falling unit can cause serious injury or even death This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 4 inches 10cm or more around this apparatus Press to Turn the unit On and go into Standby mode To completely Turn Off the unit you must unplug the AC power cord Disconnect the AC plug to shut the unit off when trouble is found or not in use The AC plug shall remain readily available Never use a gas duster on this TV The gas trapped inside of this unit may cause ignition and explosion CAUTION Danger of explosion if battery is incorrectly replaced Replac
10. p gt Play Pause Press OK or play pause slideshow iq Prev pl Next Go to the previous next photo Stop Stop slideshow O Info Display photo information Resolution Size Date Time Zoom Change display size Full 2X 4X 8X ty Rotate Press OK to rotate the picture Repeat Select the repeat mode Repeat None Repeat One Repeat All Jd Music Play background music in slideshow mode For this feature to work the MP3 files have to be in the same folder as the currently playing pictures MUSIC 1 Use A V lt gt to select a file or a folder 2 Press OK or gt to MOVIE 1 Use A W db to select a file or a folder USB MOVIE Navigate Movie2 avi Play Select play the selected files Press OPTIONS to display the optional menu then use j to select the des ired item p gt Play MM Pause Press OK or play pause to play or pause the music 44 FB Press OK to Fast Backward the music Repeatedly press OK to increase the speed FBX2 FBX4 FBX8 FBX1 6 FBX32 Play FF Press OK to Fast Forward the music Repeatedly press OK to increase the speed FFX2 FFX4 FFX8 FFX1 6 FFX32 Play I Prev PI Next Go to the previous next track Stop Stop music playback O Info Display the information Resolution Audio Track Subtitle Program Size amp Repeat Select the repeat mode Repe
11. the Symbol amp DTS and the Symbol together are registered trademarks and DTS TruSurround is a T S d trademark of DTS Inc DTS Inc All Rights Reserved ao ENERGY STAR is a joint program of the U S Environmental Protection Agency and the U S Department of Energy helping us all save money and protect the environment through energy efficient products and practices Consumer Notice This TV has been set to maximize energy efficiency while delivering the best possible picture using the factory installed home mode settings Changing or enabling other features in this TV e g brightened backlighting will possibly increase energy consumption beyond the original ENERGY STAR qualified limits Manufactured under license from DTS Licensing Limited 6 Enelen 2 Important Positioning the TV Large screen TVs are heavy Two people are required to carry and handle a large screen TV aa ake sure to hold the upper and bottom L frames of the unit firmly as illustrated gt e Install the unit in a horizontal and stable position Do not install the unit in direct sunlight or in a place subject to dust or strong vibration Depending on the environment the temperature of this unit may increase slightly This is not a malfunction Avoid a place with drastic temperature changes Do not place anything directly on top or bottom of the unit Depending on your external devices
12. within common industry standards and is not a malfunction Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Service Centers and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in this User Manual any adjustments or assembly procedures not recommended or authorized in this User Manual shall void the warranty Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B Digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by Turning the equipment Off and On the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit di
13. Audio cable For 32PFL5708 F7 and 39PFL5708 F7 HDMI cable OUT Aa HDMI ARC amplifer For 40PFL5708 F7 47PFL5708 F7 and 50PFL5708 F7 BL O 0 HDMI 1 IN only OUT mm ca 7 i a Digital home theater HDMI cable HDMI ARC amplijer The HDMI 1 connector is HDMI Audio Return Channel ARC compliant Use it to output Digital Audio to an HDMI home theater system e Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using an HDMI cable attached to HDMI ARC connectors Enelen Component Analog Video Connection Component Analog Video connection offers better picture quality for video devices connected to the unit If you connect to the unit s Component Video Y Pb Pr Input jacks connect Analog Audio cables to the Analog Audio L R Input jacks For 32PFL5708 F7 and 39PFL5708 F7 i LATED UG FF Ne set top box or de 8 a j CE E Component Y Pb Pr Blu ray disc DVD Video cables recorder ca Audio L R For 40PFL5708 F7 47PFL5708 F7 and 50PFL5708 F7 i 9 Audio LR cables PRISA set top box or Component Y Pb Pr Le Video cables OUT
14. CH CH key on your TV remote control for channel browsing 1 Press MENU to display Home Menu and use A Y to select Features then press OK 2 Use AVP to select the item you want to adjust then press OK Language Select a menu language from the list then press OK English Espa ol and Frangais Child lock This interface offer a variety of features to limit child s access to inappropriate TV contents Please refer to the section of Child lock on p 23 for detailed information Caption settings Please refer to the section of Caption settings on p 25 for detailed information Sleep timer You can switch the TV to standby after a specified time During the countdown to the specified time you can switch off your TV earlier or reset the sleep timer Select a value between Off 240 min PC settings Accesses options of PC related settings You can make adjustments in Horizontal position Vertical position Clock and Phase by using the on screen cursor bars when PC is connected to the TV You can also select Auto adjustment the option will automatically adjust the picture position Select Reset PC settings to reset the memory of PC settings EasyLink You can get the most out of your HDMI CEC compliant devices with Philips EasyLink enhanced control features Connect your HDMI CEC compliant devices through HDMI to your TV and control them at the same time with your TV remot
15. DMI ARC connectors Aspect ratio he width of a TV screen relative to its height Conventional TVs are 4 3 in other words the TV screen is almost square widescreen models are 16 9 the TV screen is almost twice as wide as its height CEC Consumer Electronics Control This allows you to operate the linked functions between our brand devices with CEC feature and this unit We do not guarantee 100 interoperability with other brands of CEC compliant devices Component Video This is a video signal format that conveys each of 3 principal colors of light red blue and green through different signal lines This allows the viewers to experience picture colors as original as it is There are several signal formats including Y Pb Pr and Y Cb Cr Dolby Digital The system developed by Dolby Laboratories to compress Digital sound It offers stereo sound 2ch or multi channel Audio DTV ATSC Acronym that stands for Advanced Television Systems Committee and the name of the Digital broadcasting standards E sticker E sticker is showing set features technical information etc on this TV set that is displayed on the TV screen mainly used by TV retailers Previously the information was on a printed sticker that was put on the display HDMI High Definition Multimedia Interface Interface that supports all uncompressed Digital Audio Video formats including set top box Blu ray DVD recorder or Digital t
16. Digital output to output Bitstream When the audio of the format Bitstream content is PCM it will be output in PCM even if Bitstream is selected You can select the Audio language while your TV is receiving the Digital broadcasting Audio to select the language according to your preference Language lt differs depending on the program 2 Use A Y 4 to select the item you want to adjust then press OK Autoprogram Select one option to install channels Antenna or Cable This item is only applicable when input source is in DTV A Antenna Channel Strength menu will appear on the TV screen indicating the signal strength of DTV Channel list Displays a list of available channels Audio only Select to tum off the panel screen and keep only the sound on Select On to select the appropriate video aspect ratio based on information present in input MPEG stream from tuner source Selecting Off uses TV s current Aspect ratio setting Auto aspect ratio Autoprogram If you switch wires e g between antenna and CATV or if you move the unit to a different area after the initial setting or if you restore the DTV channels you deleted it is recommended to use AutoProgram to perform a new channel search 1 Press Eh MENU to display Home Menu and use A Y to select Setup then press OK Use A Y to select Autoprogram then press OK Use amp Y to sele
17. by using 2 SOURCE For 32PFL5708 F7 and 39PFL5708 F7 cable set top box dd o Connecting a set top box Blu ray DVD recorder via composite connectors and Analog Audio Do not place your recorder too close to the screen because some recorders can be susceptible to signals For 32PFL5708 F7 and 39PFL5708 F7 Blu ray DVD recorder E M OUT 3 S Audio UR i si video cable S J i gt tts set top box For 40PFL5708 F7 47PFL5708 F7 and 50PFL5708 F7 set top box i i OUT a Al i Baas UR 4 el t video Zs OUT AAA cable RF cable Blu ray DVD recorder Only the left loudspeaker reproduces sound for mono equipment Use a mono to stereo adapter not supplied for sound reproduction via all internal loudspeakers lf there is no input signal and no operation for 15 minutes the unit will go into standby mode automatically Plugging in the AC power cord Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made l Caution Do not connect the AC power cord to a power supply outside the indicated voltage of this unit AC 120V Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks e Each time you plug in the AC power cord no operations will be performed for a few seconds This
18. eje d e a U QO O Sig ie gt sige 6 J O ejer U e gt 6 6 6 ase Registering your model with Philibs makes you eligible for all of the valuable benefits listed below so don t miss out Complete and return your Product Registration Card at once or visit at dec com support to ensure Product Safety Notification By registering your product you ll receive notific gis directly from the manufacturer in the rare case ofa all of the os to which you re entitled elaine product recall or safety defect special money saving offers Know these safety symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the apparatus s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons CAUTION RISK OF ELECTRIC SHOCK DO NOT PRECAUCION ADVERTENCIA A T The exclamation point within an equilateral triangle is intended to alert the user to the NO ABRIR RIESGO DE presence of important operating and maintenance servicing instructions in the literature ATENCION accompanying the apparatus VERIFIQUE QUE EL VOLTAJE DE ALIMENTACION SEA EL REQUERIDO PARA SU APARATO WARNING To reduce the risk of fire or electric shock do not expose this apparatus WARNING To REDU
19. in ANSI IEEE C95 1 1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C This equipment should be installed and operated with minimum distance 2 5cm between the radiator amp your body his device complies with Industry Canada license exempt RSS andard s Operation is subject to the following two conditions this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio requency RF Exposure Guidelines in Supplement C to OET65 This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation MPE But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person s body excluding extremities hands wrists feet and ankles Copyright All other registered and unregistered trademarks are the property of their respective owners qm The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other HIGH DEFINITION MULTIMEDIA INTERFACE countries A e For DTS patents see httpy patents dts com DTS
20. of with your household waste Please ensure you dispose of batteries according to local regulations Downloading an electronic copy To obtain a more detailed electronic copy of this User Manual Point your browser to www philips com support Choose your country of location with language Enter the product name or number in the search field Alternatively you can browse the catalog Click the Description or Model VA WN Under Product support click User manual 3 Get started Features DTV TV CATV You can use your remote control to select channels which are broadcast in Digital format and conventional Analog format Also cable subscribers can access their cable TV channels e Information display You can display the title contents and other information of the current program on the TV screen e AutoProgram This unit automatically scans and memorizes channels available in your area eliminating difficult setup procedures e Child lock This feature allows you to block children s access to inappropriate programs e Closed Caption decoder Built in Closed Caption decoder displays text for Closed Caption supported programs e MTS SAP tuner Audio can be selected from the remote control e Auto Standby if there is no Input signal and no operation for 15 minutes the unit will go into Standby mode automatically e Sleep timer You can set the unit to go into Standby mode after a specific amount of time e Cho
21. or old cinder block construction 4 Consumer Electronics Association IF you are unsure contact a professional installer e A minimum of two people are required for installation Flat panel displays can be heavy www CE org safety Ens DION OUT ie Be 10 11 12 Read these instructions eep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturers instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or groundingtype plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is
22. p 36 If okay then possible infrared sensor trouble Aim the remote control directly at the infrared sensor window on the front of the unit Reduce the distance to the unit Re insert the batteries with their polarities as indicated When there is an infrared equipped device such as PC near this unit it may interrupt the remote control signal of this unit Movethe infrared equipped device away from this unit change the angle of the infrared sensor or Turn Off the infrared communication function How come the initial setup appears every time Turn On this unit Make sure to complete the initial setup before the unit goes into Standby mode Why can not watch some RF signal TV programs Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously unavailable channels are broadcast Make sure Autoprogram has been completed ua The selected channel may not be broadcasting When Autoprogram is interrupted and not completed some channels will not be received Make sure to complete the Autoprogram m p 21 The selected channel cannot be viewed by the Child lock setting u p 23 The unit requires some kind of antenna Input An indoor antenna Digital or VHF UHF an external antenna Digital or VHF UHF or an RF coaxial cable from your wall cable satellite box needs to be plugged into the unit p 21 How come there is no image from the connected externa
23. the product name and the purchase date from an authorized retailer is considered such proof WHAT IS COVERED This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period At its option the company will either 1 repair the product at no charge using new or refurbished replacement parts or 2 exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory or 3 refund the original purchase price of the product Replacement products or parts provided under this warranty are covered against defects in materials and workmanship from the date of the replacement or repair for ninety 90 days or for the remaining portion of the original product s warranty whichever provides longer coverage for you When a product or part is exchanged any replacement item becomes your property and the replaced item becomes company property When a refund is given your product becomes company property Note Any product sold and identified as refurbished or renewed carries a ninety 90 day limited warranty Replacement product can only be sent if all warranty requirements are met Failure to follow all requirements can result in delay WHAT IS NOT COVERED EXCLUSIONS AND LIMITATIONS This Limited Warranty applies only to new compan
24. 99 in Change PIN to reset the PIN code m p 25 Enelen a Troubleshooting f the unit does not perform properly when operated as instructed in this User Manual check the following chart and all connections once before calling for service No power Make sure that the AC outlet supplies the proper voltage plug another electrical appliance into the AC outlet to ensure that AC outlet operates normally the AC power cord for 1 minute to allow the unit to reset itself Ifa power failure occurs unplug Remote control buttons do not work Re insert the batteries with their polarities signs as indicated When there is an infrared equipped device such as a PC is near this unit it may interrupt the remote control signal of this unit Power is ON but no screen image he connection of the antenna cable receiver or satellite box is connected correctly the unit are connected to the correct Output jack of your device like Blu ray DVD Check whether Check whether all the cables to recorder Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode Tap any key on the keyboard to wake up your computer Check if the correct Input mode is selected by pressing J SOURCE No picture or sound ew other TV channels The problem might be limited to the broadcasting station or weak signal strength nplug the AC power cord and wait for
25. AT Captions are displayed as a white box No caption is displayed in the closed caption supported program Interference from buildings or weather conditions may cause captioning to be incomplete for Analog only Broadcasting station may shorten the program to insert advertisement The closed caption decoder cannot read the information of the shortened program Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts Most captioning production companies can display a dialog to maximum of 220 words per minute If a dialog exceeds that rate selective editing is used to insure that the captions remain up to date with the current TV screen dialog Black box is displayed on the TV screen The text mode is selected for caption Select CC 1 CC 2 CC 3 or CCA tm p 25 Enelen a gt 8 Information Glossary Analog TV NTSC Acronym that stands for National Television Systems Committee and the name of Analog broadcasting standards Off the air NTSC signals are no longer being sent by major broadcasting stations in the USA ARC Audio Return Channel HDMI 1 only DMI ARC allows you to use Philips EasyLink to output TV audio directly to a connected Audio device without the need for an additional Digital Audio cable Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using an HDMI cable attached to both
26. CE THE RISK to rain or moisture Apparatus shall not be exposed to dripping or OF FIRE OR ELECTRIC SHOCK DO NOT i EDAN EXPOSE THIS APPLIANCE TO RAIN OR splashing and no objects filled with liquids such as vases shall be placed on MOISTURE the apparatus AVIS RISQUE DE CHOC k er A f ELECTRIQUE NE ATTENTION Pour viter les choc lectriques introduire la lame la plus large de la fiche PAS OUVRIR dans la borne correspondante de la prise et pousser jusqu au fond Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories The caution marking is located on the rear or bottom of the cabinet PHILIPS _ Visit our World Wide Web Site at www philips com support Congratulations on your purchase CHILD SAFETY It Makes A Difference How and Where As you enjoy your new product ete er ea ee please keep these safety tips in mind THE ISSUE e The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases However flat panel displays are not always supported on the proper stands or installed according to the manufacturer s recommendations e Flat panel displays that are inappropriately situated on dressers bookcases shelves desks speakers chests or carts may fall over and cause injury THIS MANUFACTURER CARES e The consumer electronics industry is committed to making
27. I connection This unit can be connected to your device that has a DVI terminal Use an HDMI DVI conversion cable for this connection and it requires Audio cable for Analog Audio signal as well For 32PFL5708 F7 and 39PFL5708 F7 HDMI DVI conversion cable f DE cable receiver or OUT satellite box with the DVI Output jack udio L R cables 30 For 40PFL5708 F7 47PFL5708 F7 and 50PFL5708 F7 HDMI DVI OUT conversion cable El 000 tHe da a ee cable receiver or OUT satellite box with the DVI Output jack Use an HDMI cable with the HDMI logo a certified HDMI cable High Speed HDMI cable is recommended for the better compatibility For HDMI connection The unit accepts 480i 480p 720p 1080 1080p 24 30 60Hz of video signals 32kHz 1 44 1kHz and 48kHz of Audio signals This unit accepts 2 channel Audio signal LPCM only This unit accepts only signals in compliance with ElA861 For HDMI DVI connection The unit accepts 4801 480p 720p 1080 and 1080p video signals HDMI DVI connection requires separate Audio connections as well and the Audio signals are output as Analog L R Audio DVI does not display 480i image which is not in compliance with EIA CEA 861 861B HDMI ARC connection HDMI ARC allows you to use EasyLink to output TV Audio directly to a connected Audio device without the need for an additional Digita
28. R buttons Channel not available or No Signal will appear on the TV screen after the subchannel broadcast is over Audio only message will appear on the TV screen when you receive only sound signal Watching channels from an external device Switching each input mode can easily switch with the remote control between TV DTV or Analog TV and external devices when they are connected to the unit 1 Turn Ona set top box or the connected device The picture from your set top box or the connected device might appear automatically on the TV screen If the picture does not appear SOURCE 2 Press E SOURCE repeatedly to select the set top box or the connected device then press OK to enter Pressing A W to select the Input modes TV A Component HDMI 1 e HDMI 2 VGA USB Access the Home menu Press ft MENU to open Home menu Cc SEE SAP h FORMAT 16 Ep Sleep timer Sleep timer can set the unit to go into Standby mode after an incremental period of time SLEEP oo ORMA T i Press SLEEP repeatedly to change the amount of time increases the time up to 240 minutes Press SLEEP once to call up the display for checking the remaining time To cancel sleep timer press SLEEP until Off is displayed Changing picture format Display modes can be selected when your TV receives a 16 9 or 4 3 video signal Three types of display modes can be selected for
29. Register your product and get support at www philips com support 32PFL5708 F7 39PFL5708 F7 40PFL5 708 F7 47 PFL5708 F7 SOPFL5 08 F7 EN For further assistance call the customer support service in your EN User Manual country a To obtain assistance contact Philips Customer Care Center To obtain a more detailed electronic copy of this In the US A Canada Puerto Rico or the U S Virgin Islands 1 866 309 5962 manual go to www philips com support M xico D F and Area Metropolitana 58 87 97 36 Interior de la Republica 01 800 839 19 89 Para obtener m s informaci n llame al servicio de soporte al cliente de su pa s ES Manual del Usuario Para obtener asistencia comun quese con Centro de atenci n al cliente de Philips sn 5 En los Estados Unidos en Canada Puerto Rico o en las Islas Virgenes de Para obtener He cope fa mas detallada los Estados Unidos 1 866 309 5962 de este manual visite www philips com support M xico D F y rea Metropolitana 58 87 97 36 Interior de la Republica 01 800 839 19 89 Pour obtenir de laide suppl mentaire communiquez avec le centre de FR Manuel d Utilisation service a la alado de Votre pays A ety Pour obtenir de l aide communiquez avec le centre de service la client le Philips au Dans le Etats Unis au Canada Puerto Rico ou aux lles Vierges am ricaines 1 866 309 5962 M xico DF et Area Metropolitana 58 87 97 36 Interior de la Re
30. SP avi MPEG4 mp4 avi MP4 mp4 JPEG Motion JPEG MPEG1 Layer 2 32Kbps 448Kbps Bit rate 32KHz 48KHz Sampling rate Music MPEG1 Layer 3 32Kbps 320Kbps Bit rate 32KHz 48KHz Sampling rate MPEG2 Layer3 32Kbps 320Kbps Bit rate 32KHz 48KHz Sampling rate 1 Component Videc Input CMe pir supporting video signals 480i p 720p 1080i p 60Hz Component Audio L R Input 1 Composite Video Audio Input 1 shared with ComponentY and L R HDMI Input 32PFL5708 F7 39PFL5708 F7 x2 npa 40PFL5708 F7 47PFL5708 F7 50PFL5708 F7 x3 PC Input via VGA HDMI and HDMI DVI PC Audio USB 1 1 Digital Audio Output supporting Dolby Digital 1 Headphone Output 1 8 inches 3 5mm Power Power requirements 120V AC 10 60Hz 0 5 Temperature Operating temperature 41 F 5 C to 104 F 40 C Specifications are subject to change without prior notice Enelen 30 a 10 Warranty LIMITED WARRANTY ONE 1 YEAR WARRANTY COVERAGE This warranty obligation is limited to the terms as set forth below WHO IS COVERED This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase Warranty Period from an Authorized Dealer The original sales receipt showing
31. Stereo and sound settin SAP For use of Analog TV only o decrease contrast to increase contrast 2 5 Red gain You can select your preferred audio language Kaita moore Audio when TV channel broadcasts multiple dual audio Color Green gain decrease contrast to increase contrast Language noise alignment g with green with green gt q task Rees inches oa Reset sound Select to restore the default sound settings while channel Blue gain De ea SR with Aa settings installation settings remain the same o decrease brightness to increase brightness Red otfset with red with red o decrease brightness to increase brightness Green offset with green with green o decrease brightness to increase brightness Biue offset with blue with blue ZO Es You can select Mono or Stereo if the Analog broadcasting is sending the MTS Multi channel television sound You can select SAP while your TV is receiving the Analog broadcasting that has the SAP Second Audio Program Ed not Mono to output mono audio The Setup menu item is disabled for non tuner sources Audio setting Stereo To output eee aide Setup allows user to do channel installation and other settings for tuner SAP to output second audio program sources 1 Press fe MENU to display Home Menu and use A Y to select Setup then press OK You can set the digital audio output format ee PCM to output PCM
32. a PC Input signal Press FORMAT repeatedly to switch the TV aspect ratio h FORMAT CD zi FORMAT For 16 9 video signal Wide Cinema Normal Displays a 16 9 picture at its original size Removes the black bars on the side of 4 3 TV broadcasts This action will Zoom ae x cause minimal distortion on the screen Wide Displays a 16 9 picture that is stretched horizontally and vertically Cinema Scales 4 3 picture format to 16 9 Other than DTV and HDMI connected devices enlarges the picture to best Auto fit the screen DTV and HDMI connected devices display the picture at its original size The subtitles may remain visible For 4 3 video signal Auto lt 4 Y Cinema
33. about 1 minute then plug the AC power cord and turn On the unit again utoprogram must be completed when you set up the unit for the first time or move it to a location where reviously unavailable channels are broadcast Pos The selected channel cannot be viewed by the Child lock setting um p 23 The unit requires some kind of Input signal An indoor antenna VHF UHF an external antenna VHF UHF or an RF coaxial cable from your wall or cable satellite box signal needs to be plugged into the unit No color Adjust Color in Picture settings mp p 18 No sound distorted sound or incorrect Audio Sound is heard when using the HDMI DVI connections Make sure that the Analog Audio signals from the HDMI DVI device are connected to the Analog Audio Input L R Jacks Adjusted Picture or Sound settings are not effective every time the unit is Turned On You must set to Home in Location mp p 26 Otherwise the settings you adjusted will not be memorized after the unit goes into Standby mode Forgotten PIN code Enter 9999 to clear your password Sound OK picture poor Electrical interference from nearby appliances may affect picture quality Adjust Contrast and Brightness in Picture settings Imp p 18 For the best picture quality watch High Definition wide screen programs lf the HD content is not available watch Standard Definition programs instead Picture OK sound po
34. ack DVD HDMI Audio Sys NS AV511 i Location Choosing Home gives you full flexibility to change predefined settings for picture and sound 1 Press fe MENU to display Home Menu and use A Y to select Features then press OK Use A W to select Location then press OK Language Child lock Caption settings Sleep timer d O Features Software upgrade Reset AV amp features 3 Use A Y to select Home then press OK The unit will be set up with predefined settings for retail displays In this setting the power consumption Retail may possibly exceed the limit requirement of the ENERGY STAR qualification This setting is ENERGY STAR qualified The unit is here set to maximize the energy efficiency for home setting and it can be adjusted through a choice of picture and sound quality according to your preference You must set Home Otherwise personalized picture and sound settings will not be memorized after the unit goes into Standby mode Enelen E sticker When you set Location to Retail E sticker Electronic Sticker is displayed E sticker can be turned Off using procedure below 1 Use A Y to select E sticker then press OK 2 Use A Y to select Off then press OK Your TV is fitted with a USB connection that enables you to view photos listen to music or watch video files stored on a USB Memory Stick 1 Connect the USB Memory Stick to the USB terminal on the
35. at None Repeat One Repeat All tk Ratio Change display aspect ratio Auto 4 3 1 6 9 Enelen Upgrading the software USB upgrade You can Upgrade the software by using USB Memory Stick 1 Connect your USB Memory Stick with the upgrade file to the USB terminal on the side of your TV o display Home Menu and use A W to select Features then press OK Use A Y to select Software upgrade then press OK 2 3 4 Use AV to select Upgrade then press OK 5 Use A Y to select USB 6 Use A Y to select Check then press OK 7 Read the on screen instructions and confirm that you want to continue with the installation Current Version New Versio 8 When the software upgrade is completed remove the USB Memory Stick then press OK to reboot the TV 9 Unplug the AC power cord for a few seconds from AC outlet and plug it again 1 0 Press again to turn the unit On The TV starts up with the new software For further assistance please contact Call Center Note All settings will remain the same even if you update the software version 2 a 6 Connecting devices Before you connect AC power cord Be sure other devices are connected properly before plugging in the AC power cord Selecting your connection quality HDMI Highest quality Supports high definition Digital signals and gives highest picture and sound quality Video and Audio signal
36. cluding built in cell phone cameras Point the Digital Camera towards the remote control infrared diode at the front of the remote control Press any button on the remote control and look through the camera display If the infrared pulsating light appears through the camera the remote control is sending out an IR signal lt Enelen al 9 Specifications 32PFL5708 F7 39PFL5708 F7 40PFL5708 F7 47PFL5708 F7 50PFL5708 F7 Model Picture enhancement FHD 1920 x 1080 pixels 60Hz Type Aspect ratio 43 169 Viewing angles 178 V by 178 H Built in Digital tuner ATSC NTSC Sound enhancement Mono Stereo Mono Stereo DTS TruSurround 5 W x 2 32PFL5708 F7 39PFL5708 F7 and 40PFL5708 F7 8 W x 2 47PFL5708 F7 5OPFL5708 F7 Power output RMS watts Equalizer 5 band Ease of use SD 4 3 Source Normal Zoom Wide Cinema Auto HD 16 9 Source Normal Zoom Wide Cinema Auto Picture format HDMI AV 4 3 Source Normal Zoom Wide Cinema Auto HDMI AV 16 9 Source Normal Zoom Wide Cinema Auto PC Source Refer to HDMI AV 16 9 Source above if PC has HDMI Output Photo Slide show JPEG files only MPEG1 dat mpg mpeg mkv MPEG2 dat mpg mpeg avi MPEG2 PS vob MPEG2 TS ts trp tp Video playback m2ts H 264 ts trp tp m2ts mp4 mkv avi MPEG4 SP A
37. ct Cable or Antenna then press OK A wN Press OK to select Start now e Autoprogram will start automatically 5 Follow the on screen instructions to complete the installation After setting Autoprogram using CH CH skips unavailable programs automatically If you are not receiving a signal from your cable service contact the cable provider If you press or during Autoprogram the setup of TV channels will be canceled Even if Autoprogram is completed the channel setting will be lost if the AC power cord is unplugged before the unit goes into Standby mode by pressing The PIN code will be required once you set a PIN code in the Child lock u p 23 Ifyou want to change your PIN code follow the instruction of Change PIN im p 25 l boo Channel list You can make a list of your preferred TV channels so that you can find those channels more easily 1 Press fe MENU to display Home Menu and use A Y to select Setup then press OK 2 Use A Y to select Channel list then press OK 3 Use A Y to select the desired channel then press OK repeatedly to switch between skip watch The greyed out channels indicates exclusion which means those channels will be skipped when using CH CH key on your TV remote control for channel browsing The white channels indicates inclusion which means those channels will be shown when using
38. e control For detailed information please refer to the section of EasyLink on p 26 Location Select Home or Retail as the location mode for your TV For detailed information please refer to the section of Location on p 26 E sticker Enables or disables E sticker Only available when Location is in Retail mode Software upgrade You can download the upgrade file from our official website to your USB Connect the USB to your TV and select Software upgrade then follow the on screen instructions to upgrade the TV software Reset AV amp features You can reset the AV amp Features memory completely including your Child Lock PIN code Language 22 1 Press fe MENU to display Home Menu and use A Y to select Features then press OK 2 Use A Y to select Language then press OK Features Select your menu language English Seleccione rl idioma para el men S lectionnez la langue du menu Espa ol elo 23 a Child lock Channel lock Particular channels or external Input modes can be invisible in this You can prevent your children from watching certain programs or cer function tain channels by locking the TV controls and by using ratings Press MENU to display Home Menu and use A Y to select 1 Use A Y to select Channel lock then press OK 2 Use A Y to select the particular channels or external Input then Features then press OK
39. e only with the same or equivalent type WARNING Batteries battery pack or battery installed shall not be exposed to excessive heat such as sunshine fire or the like WARNING To prevent injury this apparatus must be securely attached to the furniture wall in accordance with the instructions Tipping shaking or rocking the unit may cause injury death CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so 7 a Environmental care The packaging of this product is intended to be recycled Contact your local authorities for information about how to recycle the packaging For product recycling information please visit www recycle philips com End of life directives Philips pays a lot of attention to produce environment frendly products in green focal areas Your new TV contains materials which can be recycled and reused At the end of its life specialized companies can dismantle the discarded TV to concentrate the reusable materials Be andto minimize the amount of materials to be disposed of Please ensure you dispose of your old TV according to local regulations Disposal of used batteries The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed
40. e unit you must unplug the AC power cord ooo Power On indicator Terminals 32PFL5708 F7 and 39PFL5708 F7 Digital Audio coaxial cable Digital audio output to home theaters and other digital audio systems Component Composite Video Input jacks Component Composite shared Audio Input jacks Component Composite analog audio L R jacks signal VGA cable connection for PC Headphone Audio Output jack Headphone 3 5mm stereo jack for personal listening 75 ohm Cable Antenna connection Signal Input from an antenna cable or satellite HDMI Input jacks Digital audio and video Input from high definition digital devices such as Blu ray disc players cable boxes and satellite set top boxes For HDMI 1 only n addition to normal HDMI and HDMI DVI functionality it outputs TV Audio to an HDMI ARC compliant device such as a home theater system USB terminal Data input from USB Memory Stick only Do not connect any device to this terminal such as digital camera eyboard mouse etc PC Audio Input jack PC analog audio jack signal with stereo mini 3 5mm plug audio cable on PC 40PFL5708 F7 47PFL5708 F7 and 50PFL5708 F7 Headphone Audio Output jack Headphone 3 5mm stereo jack for personal listening Digital Audio coaxial cable Digital audio output to home theaters and other digital audio systems 75 ohm Cable Antenna connection S
41. elevision over a single cable HDTV High Definition TV Ultimate Digital format that produces high resolution and high picture quality PIN code A stored 4 digit number that allows access to parental control features SAP Secondary Audio Program Second Audio channel delivered separately from main Audio channel This Audio channel is used as an alternate in bilingual broadcasting SDTV Standard Definition TV Standard Digital format that is similar to the Analog TV NTSC picture quality DTS TruSurround Enable DTS TruSurround to enhance your audio experience 36 Maintenance Cabinet Cleaning e Wipe the front panel and other exterior surfaces of the unit with a soft cloth e Never use a solvent or alcohol Do not spray insecticide liquid near the unit Such chemicals may cause damage and discoloration to the exposed surfaces Panel Cleaning Wipe the panel of the unit with a soft cloth Before cleaning the panel disconnect the AC power cord Servicing Should your unit become inoperative do not try to correct the problem yourself There are no user serviceable parts inside Call our toll free customer support line found on the cover of this User Manual to locate an authorized service center IR Signal Check If the remote control is not working properly you can use a Digital camera including a cellular phone with built in camera to see if it is sending out an infrared signal With a Digital camera in
42. er s Manual 25 a TO OBTAIN ASSISTANCE Contact the Customer Care Center at 1 866 309 5962 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER WITH THE ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusions or limitation of incidental or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you ghts You may have other rights which vary from state province to state province z 061708 P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 P amp F Mexicana S A de C V Av La Palma No 6 Col San Fernando La Herradura Huixquilucan Edo de M xico C P 52787 Philips and Philips Shield are used under license of Koninklijke Philips N V
43. fferent from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for help Declaration of Conformity Trade Name PHILIPS Responsible Party P amp F USA Inc Model 32PFL5708 39PFL5708 40PFL5708 47PFL5708 50PFL5708 Address PO Box 2248 Alpharetta GA 30023 2248 USA Telephone Number 1 866 309 5962 a Modifications This apparatus may generate or use radio frequency energy Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the User Manual The user could lose the authority to operate this apparatus if an unauthorized change or modification is made Cables Connections to this device must be made with shielded cables with metallic RFi EMI connector hoods to maintain compliance with FCC Rules and Regulations Canadian notice This Class B Digital apparatus complies with Canadian ICES 003 Standard Television Receiving Apparatus Canada BETS 7 NTMR 7 To maintain compliance with FCC RF exposure requirements use only belt clips holsters or similar accessories that do not contain metallic components in its assembly The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided FCC Radiation Exposure Statement This equipment is compliance with SAR for general population uncontrolled exposure li mits
44. he captions do not always use correct spelling and grammar Not all TV programs and product commercials include Closed Caption information Refer to your area TV program listings for the TV channels and times of Closed Caption shows The captioned programs are usually noted in the TV listings with service marks such as CC Not all captioning services are used by a TV channel during the transmission of a Closed Caption program Picture display So you must be Philip Wil i m pleased to meet you Font dge Style Size Text Color and Text opacity Edge color and Edge type Background Background color and Background opacity Review your setting choice made below by looking in the upper left corner of the displayed setting box not all selections show the differences selected Note Sleep timer Sleep timer can set the unit to go into Standby mode after an incremental period of time 1 Use A Y to select Sleep timer then press OK 2 Use A Y to select a value between off and 240 min Forma Note You can also press SLEEP directly to switch the desired setting itm p 10 EasyLink This function allows you to operate the linked functions between our brand devices with a EasyLink feature and this unit connecting through an HDMI cable You must connect this unit to our brand EasyLink devices and be sure its EasyLink setting is also set to On 1 Press fe MENU
45. home entertainment enjoyable and safe TUNE INTO SAFETY e One size does NOT fit all Follow the manufacturer s recommendations for the safe installation and use of your flat panel display e Carefully read and understand all enclosed instructions for proper use of this product e Do not allow children to climb on or play with furniture that the television set is sitting on or mounted to e Don t place flat panel displays on furniture that can easily be used as steps such as a chest of drawers e Remember that children can become excited while watching a program especially on a larger than life flat panel display Care should be taken to place or install the display where it cannot be pushed pulled over or knocked down e Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children WALL MOUNTING IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY ALWAYS e Use a mount that has been recommended by the display manufacturer and or listed by an independent laboratory such as UL CSA ETL e Follow all instructions supplied by the display and wall mount manufacturers e If you have any doubts about your ability to safely install your flat panel display contact your retailer about professional installation e Make sure that the wall where you are mounting the display is appropriate Some wall mounts are not designed to be mounted to walls with steel studs
46. ice from CS1 CS6 or CC1 CC4 press OK This option is only available in DTV In addition to the basic Closed Caption DTV has its own Closed Cap tion called Digital caption service Use this menu to change the settings for Digital caption service CS 1 Selects one of these before changing Digital caption is any other item in Caption settings service menu Choose CS 1 under normal CS 6 circumstances You can choose the size font color background and other characteris tics of the caption text Caption style Use 4 W to select first enable User Setting then shift back to previous level of options Use A Y to select an item and press OK then use A Y to select the desired setting and press OK Caption style You can reset the status of Caption User setting style You can change Closed Captioning font size style color and transparency Font Size Font Style Font Color and Font opacity You can change background color and transparency of the displayed caption Background color and Background opacity You can change edge color and type of the displayed caption Edge type and Edge color Closed Captioning service may not be controlled by this unit s menu options if you are watching television through an external cable or satellite set top box In which case you will need to use the menu options on the external set top box to control Closed Captioning T
47. ices for on screen language Select your on screen language English Spanish or French e Stereo sound function PLL frequency synthesized tuning Provides free and easy channel selection and lets you tune directly to any channel using the number and decimal point e buttons on the remote control e Various adjustment for picture and sound Customizes image quality suitable for your room and sets your sound preference EasyLink via HDMI link EasyLink allows your other HDMI link devices to be controlled by the HDMI cable connected to your TV e HDMI Input e HDMI DVI Input If your video device has DVI Output jack use an HDMI DVI conversion cable to connect the unit e Component Video Input e PC Input e AV Input USB terminal The picture JPEG music MP3 and video files stored on a USB Memory Stick can be played back on this unit e Digital Audio Output e Headphone Audio Output 6 a Supplied accessories User Manual Quick Start guide Registration card A Quick Start IMPORTANT Remote Control and batteries AAA 1 5V x 2 AC power cord Neck Screws packed with this unit 32PFL5708 F7 M4 16 39PFL5708 F7 M4 x10 40PFL5708 F7 M4 x 10 47PFL5708 F7 50PFL5708 F7 f you lose the screws please purchase the above mentioned Phillips head screws at your local store e If you need to replace these accessories please refer to the part name or No with the illustrati
48. ignal Input from an antenna cable or satellite VGA cable connection for PC PC Audio Input jack PC analog audio jack signal with stereo mini 3 5mm plug audio cable on PC Component Composite shared Audio Input jacks Component Composite analog audio L R jacks signal Component Composite Video Input jacks HDMI Input jacks Digital audio and video Input from high definition digital devices such as Blu ray disc players cable boxes and satellite set top boxes For HDMI 1 only n addition to normal HDMI and HDMI DVI functionality tt outputs TV D Audio to an HDMI ARC compliant device such as a home theater system 60 00 8 O _ o eJO 6 o USB terminal Data Input from USB Memory Stick only Do not connect any device to this terminal such as digital camera eyboard mouse etc i Connecting the antenna or unencrypted cable Be sure your antenna or other device is connected properly before plugging in the AC pow If you connect to an Any DTV programs that er cord antenna through RF cable are broadcasted in your area can be received for free through an antenna connection For 32PFL5708 F7 and 39PFL5708 F7 RF cable RF cable If you connect a set top box through HDMI lf the TV is connected to a cable box or satellite set top box via HDMI make sure you select th e correct Source
49. ings are recommended for in house use ENERGY STAR qualified Retail mode is intended for in store display and resets video settings at Power On Previous Cancel la Ep Setup Wizard 6 6 Congratulations TV Setup is done Settings assistant You have set up your viewing preferences BACK MENU Store 5 Use A Y to select Antenna for TV channels or Cable for CATV channels then press OK If you are not receiving a signal from your cable service contact the Cable provider Ifyou press X during AutoProgram this setup of TV channels will be canceled The initial AutoProgram function can be executed for either Antenna or Cable only once When you change the connection Antenna Cable set Autoprogram again me p 21 Setup Wizard 3 6 Please sele tuning band Antenna After an initial setup is completed O o Ifyou want to scan the channels automatically again Autoprogram m p 21 Ol dp Y l 1 Ifyou want to change to another language Language ite p 22 Previous e If you want to change the location setting Location m p 26 e Ifyou want to restore the picture setting aert Settings assistant mp p 18 When Antenna is selected the TV detects antenna signals It searches for DTV and Analog TV channels available in your area When Cable is selected the TV detects signals supplied by cable It searches for DTV Analog TV a
50. is not a malfunction tl po These operations are accessible by remote control 4 Press OK to begin Settings assistant then follow the on screen instructions Initial setup This section will guide you through the unit s initial setting which includes selecting a language for your on screen menu country location and AutoProgram which automatically scans and memorizes viewable channels You can also set the network connection in this setting Before you begin Make sure the unit is connected to antenna or cable 1 After making all the necessary connections press y to tum On the unit It may take a few moments to tum On the unit for the first time Initial setup menu appears automatically after the unit is turned On 2 Use A Y to select the on screen language on the right side of the TV screen then press OK Setup Wizard 1 6 Please select language Fran ais 1 3 Select the picture setting that you prefer Espa ol BACK MENU Cancel Select OK OK gt Back y Exit Select 3 Use A Y to select the on screen location on the right side of the TV screen then press OK You must set Home in location setting Otherwise Picture and Sound settings you adjusted will not be memorized after the unit goes into Standby mode Setup Wizard 2 6 w a Please select Home Shop 2 3 Select the picture setting that you prefer BACK gt Select OK OK 4p Back Home mode default sett
51. l devices Check if the correct Input mode is selected by pressing J SOURCE Watching channels from an external device m p 16 Check the antenna cable or other Input connection to the unit When using the Component Video Connection check that the Green 1 Blue Pb Cb and Red Pr Cr connectors are connected to their corresponding colored jacks on the unit When I enter a channel number it changes automatically Many Digital channels have alternate channel numbers The unit changes the numbers automatically to the ones signifying the broadcasting station channel number These basic numbers used for previous Analog broadcasts e g Input ch 30 automatically changes to ch 6 1 Why are captions not displayed entirely Or captions are delayed behind the dialog Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts Most captioning production companies can display a dialog to maximum of 220 words per minute Ifa dialog exceeds that rate selective editing is used to insure that the captions remain up to date with the current TV screen dialog How can set the clock There is no clock function on this unit cannot change the Child lock setting because my PIN code no longer works Although the default PIN code 0000 is supplied with the unit the PIN code will be required once you set a PIN code in Child lock mp 23 When you forget your PIN code enter 99
52. ll not be tii o I E memorized after the unit goes into Standby mode 1 Press fe MENU to display Home Menu and use A W to select Color E Picture then press OK Contrast Advanced settings lc Settings assistant Reset picture settings ji Auto pictu Brightness Contrast Picture mp p 18 Advanced settings Adjusting the picture mode or customize the picture quality as your preference Reset picture settings 2 Use A V lt to select the item you want to adjust then press OK The following picture settings can be configured Depending on the format of the picture source some picture settings are not Adjusting the sound mode equalizer and some other available sound functions Settings assistant m p 19 to guide you through the best picture setting to select the desired setting then press OK Auto Vivid Standard Eco Movie Sports and Personal picture When you adjust the following settings Personal will be set automatically m p 20 Setup allows user to do channel installation and other Cursor 4 Cursor amp settings for tuner sources Brightness to decrease brightness to increase brightness Contrast to decrease contrast to increase contrast Color to decrease color intensity to increase brightness do Fogle Access advanced settings Color Select a predefined color temperatu
53. nd Cable channels available in your area Autoprogram will begin Setup Wizard 4 6 Please check that the RF cable is connected properly Scan time may take over 20 minutes Previous ox Select OK OK 4 Use your TV Switching on your TV and putting it in Standby mode O a 0 D o o To Turn Power On or to Turn Standby On Press amp on the panel or the remote control Energy consumption contributes to air and water pollution When the AC power cord is plugged in your TV consumes energy Your TV has very low Standby power consumption Adjusting volume To increase or decrease volum Press VOL VOL on the remote control To mute or unmute sound Press a MUTE on the remote control to mute the sound Press a MUTE again or VOL VOL to recover the original sound d Ep Switching channels To select Channels by using CH CH e Press CH up CH down on the remote control To select Channels by using the NUMBER buttons _ Digital TV operat For Digital channels press a number followed by a dot e and the corresponding sub channel number When selecting Digital channel 11 1 Be sure to press before entering the subchannel number When selecting cable or Analog channel 11 ED D Press PREV CH to return to the previously viewed channel To select the non memorized channels use the NUMBE
54. nt Bracket with minimum osd pi 32PFL5708 F7 39PFL5708 F7 40PFL5708 F7 minimum weight required 20 kg 44 11b 27 2 kg 601b 36 6 kg 80 71b 47PFL5708 F7 44 kg 971b i 5OPFL5708 F7 49 6 kg 109 31b The recommended Wall Mount Bracket Kit sold separately allows the mounting of the TV on the wall For detailed information on installing the wall mount refer to the Wall Mount Instruction Book P amp F USA is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on a wall mount of your own choice on your own The Wall Mount Bracket must be installed by experts ELECTRIC SERVICE EQUIPMENT ELECTRODE SYSTEM NEC ART 250 PART H P amp F USA is not liable for these types of accidents or injury noted below Install the Wall Mount Bracket on a sturdy vertical wall Ifinstalled onto a ceiling or slanted wall the TV and Wall Mount Bracket may fall which could result in a severe injury Do not use screws that are longer or shorter than their specified length If screws too long are used this may cause mechanical or electrical damage inside the TV set If screws too short are used this may cause the TV set to fall Do not fasten the screws by excessive force This may damage the product or cause the product to fall leading to an injury For safety reasons use 2 people to mount the TV onto a Wall Mounting Bracket Do not mount the TV
55. onnected HDMI CEC devices SAP Secondary Audio Programming lets you change audio language MENU button Access to menu GJ INFO Displays information about the TV channel or accessory device lt gt A Y NAVIGATION buttons Press to move left right up down through the items OK Press to decide the command of setting when the Home menu is displayed OPTIONS Displays a list of menu items applicable to connected external device CH Press to select channels Color buttons Select tasks or options if indicated 0 9 NUMBER buttons Press to select channels e DOT Press to shift the subchannel from the main channel PREV CH Press to return to the previously viewed channel 1 MUTE Press to turn the sound On and Off VOL VOLUME Press to adjust the volume PB SOURCE Toggles to select connected devices gt BACK Press to return to the previously viewed channel E FORMAT Selects a picture format SLEEP Press to activate the sleep timer cc Press to tum Closed Control to CC On CC Off or CC w mute O Eo Control panel 32PFL5708 F7 39PFL5708 F7 40PFL5708 F7 47PFL5708 F7 50PFL5708 F7 Lights up white when the unit is turned On and flashes while the unit is tuming On Infrared sensor Receives IR signals from remote control POWER STANDBY Press to turn the unit On and go into Standby mode A To completely Turn Off th
56. ons and call our toll free customer support line found on the cover of this User anual When using a universal remote control to operate this unit Make sure the component code on your universal remote control is set to our brand Refer to the instruction book accompanying your remote control for more details We do not guarantee 100 interoperability with all universal remote controls Symbols used in this User Manual The following is the description for the symbols used in this User Manual Description refers to If neither symbol appears the operation is applicable to both Attaching the base You must attach the base to the unit to have it as a table top unit Be sure the front and rear of the base match the proper direction For large screen TVs at least 2 people are required for these steps M4 10mm M4 16mm 32 39 M4 10mm 40 47 50 Make sure to use a table which can support the weight of this unit and is larger than this unit Make sure the table is in a stable location When attaching the base ensure that all screws are tightly fastened if the base is not properly attached it could cause the unit to fall resulting in injuries as well as damage to the unit To rernove the base from this unit unscrew the Phillips head screws in step 2 Be careful not to drop the base when you remove it o a Installing the remote control batteries 1 Slide the batter
57. onto the Wall Mounting Bracket while your TV is plugged in or Tumed On It may result in an electrical shock injury When installing the unit on the wall allow this much space Top 11 8 inches 30cm Left and right side 5 9 inches 15cm Bottom 3 9 inches 10cm 1 Notice Trademarks are the property of Koninklijke Philips N V or their respective owners P amp F USA reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this User Manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained P amp F USA warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied P amp F USA cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to P amp F USA will be adapted and published on the P amp F USA support website as soon as possible Pixel characteristics This LCD product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display
58. or Check if the audio cable is connected in correctly No audio in USB Video playback check if audio stream in video file is supported by TV by referring to table on mB p 27 You see a distorted picture or hear an unusual sound You may be getting NTSCTV signal not HDTV signal interference from electrical appliances automobiles motorcycles or fluorescent lights Try moving the unit to another location to see if this is the cause of the problem You see noise or trash on the screen When the capabilities of the unit exceed the capabilities of the digital broadcasting the signal will be increased to match the capabilities of the display of the unit This may cause noise or trash You switch to a different Input and the volume changes This unit will memorize the volume level from the last time you adjusted it If the volume of the sound from another device is higher or lower then the loudness will change You switch to a different Input and the screen size changes This unit will memorize the viewing mode from the last time you used the particular Input modes The display image does not cover the entire screen If you are using the unit as a PC monitor make sure that Horizontal position and Vertical position in PC settings are set correctly If you are watching TV or using the Composite Video Component Video or HD repeatedly to switch various screen modes with 480 Input press E FORM
59. pported nor will we accept any liability for damage or loss of stored data The USB memory stick is not supplied with this TV A maximum of 1 023 folders or files can be recognized A file name exceeding 256 characters or contains a dot character is not supported on this TV AAC HE AAC audio format playback is not supported in music mode or in video files Progressive JPEG files with a resolution of greater than 1024x768 are not supported Enelen PHOTO 1 Use A Y gt gt to select a file or a folder a 2 Press OK or to start a Slide show of the files Press OPTIONS to display the optional menu then use lt q gt to select the desired item 2 Press OK or gt to Press OPTIONS to display the optional menu then use gt to select the desired item Ze play the selected files gt Play If Pause Press OK or play pause to play or pause the music FB Press OK to Fast Backward the music Repeatedly ress OK to increase the speed FBX2 FBX4 FBX8 FBX16 PLAY gt FF Press OK to Fast Forward the music Repeatedly ress OK to increase the speed FFX2 FFX4 FFX8 FEX16 PLAY I lt Prev BI Next Go to the previous next track Stop Stop music playback O Info Display the information Album Title Bit Rate Artist Sampling Y ear Size Repeat Select the repeat mode Repeat None Repeat One Repeat All
60. publica 01 800 839 19 89 Pour obtenir une copie lectronique plus d taill e de ce manuel allez sur wwwphilips com support PHILIPS Contents 1 Notice 2 Important Positioning the TV Regulatory notices Environmental care Downloading an electronic copy 3 Get started Features Supplied accessories Symbols used in this User Manual Attaching the base Managing cables Installing the remote contro batteries Remote contro function Contro panel Terminals Connecting the antenna or unencrypted cable Plugging in the AC power cord Initial setup 4 Use your TV Switching on your TV and putting it in Standby mode Adjusting volume Switching channels Watching channels from an external device Access the Home menu Sleep timer Changing picture format TV screen information 5 Use more of your TV Picture Sound Setup Autoprogram Language Features Child lock Caption settings Sleep timer EasyLink Location E sticker USB PHOTO MUSIC MOVIE Upgrading the software 6 Connecting devices Selecting your connection quality Connecting your devices SINN ON ON WNNA AO O00 CO CO CO 00 NDDDA 07 01 01 01 20 21 22 22 23 25 26 26 26 27 27 28 28 28 29 29 29 30 2 7 Useful tips 33 FAQ 39 Troubleshooting 34 8 Information 35 Glossary 35 Maintenance 36 9 Specifications 37 10 Warranty 38 Enelen 2 gt O
61. r e product accessories or consumables sold AS S without warranty of any kind by including refurbished product sold AS IS by some retailers This Limited Warranty does not cover Shipping charges to return defective product Labor charges for installation or setup of the product adjustment of customer controls on the product and installation or repair of antenna signal source systems outside of the product Product repair and or part replacement because of improper installation or maintenance connections to improper voltage supply power line surge lightning damage retained images or screen markings resulting from viewing fixed stationary content for extended periods product cosmetic appearance items due to normal wear and tear unauthorized repair or other cause not within the control of the company Damage or claims for products not being available for use or for lost data or lost software Damage from mishandled shipments or transit accidents when returning product A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications A product used for commercial or institutional purposes including but not limited to rental purposes Product lost in shipment and no signature verification receipt can be provided e Failure to operate per Own
62. rdian The V Chip can block non rated programs as per CEA 608 E sec L 3 If the option to NC 17 o one under 17 admitted block NR None or E programs is used in US movie ratings lock US TV ratings lock 7 Canada English rating or Canada French rating accordingly unusual results may occur X TV MA ature audience only and the unit may not receive emergency bulletins or other types of programming Emergency Bulletins Such as EAS messages weather warnings and others Locally originated programming News Political Public Service Announcements Religious Sports Weather TV Y7 Fantasy Violence TV PG Dialog Language TV 14 X Violence Language TV MA Sex Violence Blocked sub rating will appear beside the main rating category in US TV ratings lock menu You cannot block a sub rating if the main rating is set to CI automatically changes all its sub ratings to the same Changing the category to bg or dor LD Change PIN Although the default PIN code 0000 is supplied with the unit you can set your own PIN code 1 Use A Y to select Change PIN then press OK 2 Press the NUMBER buttons to enter the new 4 digit PIN code e Enter PIN code again to confirm Note Make sure new PIN code and confirm PIN code must be exactly the same If they are different the space is cleared for reentering
63. re or alignment adjust Red Green Blue gain and offset Noise Select the amount of noise reduction for the f Before you begin reduction picture Off Low Middle and High You must set Home in Location um p 26 Cursor Cursor gt Otherwise personalized picture and sound settings wili not be memorized after the unit goes into Standby mode Tint to add green to add red f gt 1 Press tk MENU to display Home Menu and use A Fto select Sharpness to soften to sharpen Sound then press OK 2 Use A Y 4 to select the item you want to adjust then press Advanced Dynamic Dynamically enhance the details in the dark OK Settings contrast _ medium and light areas of the picture The following sound settings can be configured Depending on the sound source some sound settings are not available Dynamic Dynamically adjusts backlight level based on 8 backlight average brightness of the picture frame Auto sound Standard Select the picture ratio to suit the video J Aspect ratio source Equalizer Normal Zoom Wide Cinema and Auto arcs Select to turn On or Off the overscan DTS TruSurround function z 8 Auto volume leveling Cursor Cursor gt a Balance Backlight to reduce power to set the backlight TV speakers consumption brighter o Reset Advanced sound Picture Select to restore the default picture se
64. recognition are not supported This unit is not allowed to use the USB Memory Stick which requires an external power supply 600mA or more VGA cable 720 x 480 800 x 600 1024 x 768 1280 x 768 60Hz 1280 x 1024 1600 x 900 1680 x 1050 1920 x 1080 Other formats or non standard signals will not be displayed correctly Note ease purchase the VGA cable or HDMI DVI conversion cable that has a ferrite core he following operations may reduce noise Attach a ferrite core to the AC power cord of your PC Unplug the AC power cord and use the built in battery of your PC Use an HDMI cable with the HDMI logo a certified HDMI cable High Speed HDMI cable is recommended for the better compatibility The unit accepts 4801 480p 720p 1080 and 1080p video signals HDMI DVI connection requires separate Audio connections as well and the Audio signals are output as Analog L R Audio DVI does not display 480i image which is not in compliance with EIA CEA 861 861B Az 7 Useful tips FAQ My remote control does not work What should do 33 Answer Check the antenna or cable connection to the main unit Check the batteries of the remote control Check if there is an obstacle between the infrared sensor window and the remote control Test the signal Output use IR Signal Check m
65. s are combined in one cable You must use HDMI for full high definition video and to enable Philips EasyLink Philips HDMI supports HDCP High bandwidth Digital Contents Protection HDCP is a form of Digital Rights Management that protects high definition content in Blu ray discs or DVDs The HDMI ARC connector on the TV features HDMI ARC functionality This allows output of TV Audio to an HDMI ARC compliant device Component Y Pb Pr High quality Supports high definition Analog signals but gives lower picture quality than HDMI Component Y Pb Pr Video cables combine Red Green Blue video cables with Red White Audio L R cables Match the cable colors when you connect to the TV Composite Basic quality For Analog connections Composite Video Audio Analog cable usually combine a Yellow video cable with Red White Audio L R cables With this unit Yellow cable must be connected to Y Green of Component Video Input jacks Connecting your devices HDMI Digital connection DMI connection offers the highest picture quality DMI High Definition Multimedia Interface transports high definition Digital video and multi channel Digital Audio through a single cable For 32PFL5708 F7 and 39PFL5708 F7 HDMI cable HD game console For 40PFL5708 F7 47PFL5708 F7 and 50PFL5708 F7 f i i i f HD game console HDMI DV
66. side of your TV 2 Press ft MENU to display Home Menu and use A Y to select USB then press OK 3 Use lt P to select the PHOTO MUSIC or MOVIE then press OK al e Files encoded in the following formats are supported The files recorded under the following specifications are required TO Rec Image Photo Resolution DRAM width height sz o PEG Base line 15360x860 3 96 15360 8640 Progressive 1024x768 6 1024 768 File Extention Container Codec Video Audio dat ns MPEG1 2 at Mpg Mpe peaks MPEG MPEG2 ts trp tp m2ts MPEG2 TS 264 s MPEG1 layer 2 ve Meer Ss mies MPEG1 layer 3 VOEG mp4 MP4 MPEG leyer 3 264 has MPEG 2 4 bi mkv MKV LPCM ADPCM 264 MPEG2 avi AVI MPEG4 264 avi MOV Motion JPEG JPEG Music MP3 32Kbps 448Kbps Bit rat MPEG1 Layer 2 oe Be a e 32KHz 48KHz Sampling rate 32Kbps 320Kbps Bit rate MPEG1 Layer 3 32KHz 48KHz Sampling rate 32Kbps 320Kbps Bit rate MPEG Layer 3 32KHz 48KHz Sampling rate E This unit accepts USB memory stick only Other storage devices such as external HDD by USB bus power will not work Do not use an extension cord and USB Hub to connect devices to this unit Always insert the USB flash memory in to this unit directly We cannot be held responsible if your USB memory stick is not su
67. to display Home Menu and use A Y to select Features then press OK 2 Use A Y to select EasyLink then press OK 3 Use AV 4 to select the item you want to adjust then press OK Auto device off Auto TV on Device list Features Set the Master EasyLink to On or Off The following additional settings will be grayed out when you set to Off Off Disables all EasyLink Selects if you have connected an On external device that is compatible with the EasyLink function Master EasyLink Automatically turn off your connected EasyLink device when the TV is turned off Your connected EasyLink device stays Off in original mode even if the TV is tumed off Auto device off This unit turns to Standby mode On automatically when your connected EasyLink device has been inactive 26 This unit will turn On when the power On signal is sent from your connected EasyLink device This unit stays in Standby mode even if Off you Tum On your connected EasyLink device Auto TV on gt This unit turns On automatically when On you tum On your connected EasyLink device Device list This function lets you see the product model number or name of connected devices Use A W to select the desired EasyLink device listed on the TV screen then press OK Your connected EasyLink device will be turned On if the device is in Standby mode HDMI 2 Playb
68. ttings while channel g E installation settings remain the same Reser sound settings Settings to select the desired setting then press OK Auto sound i f Color alignment Standard Movie Music Sports News and Personal to select the specific frequency and use lt to adjust the level i Noise la a Equalizer then press OK DTS is Enable DTS TruSurround to enhance your audio experience TruSurround Sharpness Auto Dynamic contrast Dynamically adjusts volume across different channels and sources volume Sp nn S o maintain a consistent level Dynamic backlight leveling a O Adjust the balance of the right and left speakers to best suit your Balance Aspect ratio istening position 1 Overscan Select On to output sound from TV speakers Off to manually um off TV speakers and enable Digital Audio Output Bacidlght TV speakers Speakers EasyLink uses HDMI CEC to automatically tum off TV speakers and direct sound to connected HDMI CEC compliant Color to set the color temperature to Cool Home Theater System using HDMI ARC or Digital Audio Port if PR Normal Warm and Personal it detects one P When you adjust the following settings Digital 1 y f mode P Select the type of digital audio output Bitstream ersonal will be set automatically output PCM format Cursor Cursor Advanced Audio Select the audio mode from Mono
69. used use caution when moving the cart apparatus combination to avoid injury from tip over 14 Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical 4 Important Safety Instructions 13 Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Example of Antenna Grounding as per NEC National Electric Code GROUND CLAMP TI ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING Wall Mount Bracket Kit Brand SANUS Model Screw dimension M6 8mm x2 32PFL5708 F7 39PFL5708 F7 40PFL5708 F7 M6 18mm x 2 Sanus VMPL50A M6 10mm x 2 47PFL5708 F7 with space 50PFL5708 F7 M6 10mm x2 For Use on y with UL listed Wall Mou
70. y cover off the back of the remote control 2 Insert the 2 supplied batteries AAA 1 5V Be sure the and ends of the batteries line up with the markings inside the case 3 Slide the cover back into position Remove the batteries if not using the remote control for an extended period of time Remote control function
71. y manufactured products that can be identified by the trademark trade name or logo affixed to it This Limited Warranty does not apply to any hardware product or any software even if packaged or sold with the product as manufacturers suppliers or publishers may provide a separate warranty for their own products packaged with the bundled product The company is not liable for any damage to or loss of any programs data or other information stored on any media contained within the product or other additional product or part not covered by this warranty Recovery or reinstallation of programs data or other information is not covered under this Limited Warranty This warranty does not apply a to damage caused by accident abuse misuse neglect misapplication or non supplied product b to damage caused by service performed by anyone other than company approved Authorized Service Location c to a product or a part that has been modified without written company permission or d if any serial number has been removed or defaced or e product accessories or consumables sold AS IS without warranty of any kind by including refurbished product sold AS IS by some retailers This Limited Warranty does not cover Shipping charges to return defective productapproved Authorized Service Location c to a product or a part that has been modified without written company permission or d if any serial number has been removed or defaced o

Downloading

Contents

Download Pdf Manuals

Related Search

Related Contents