Lite Beam UK
Contents
1. Can select the color motor speed and pattern Also can turn on or switch off the laser projector Safety key Used to control the laser only after the key is inserted and turned on then the laser show system can play as Sound control Automatic Remote control modes 8 Technical Parameter a E LASER SHOW SYSTEM Spec Laser Power Red 80 mW Green 30 mW Dimension 115x 91 x 51 mm Net Weight 0 5 kg Control Mode Sound control Automatic Remote control Environment 10 35 C Indoor Power supply AC 100 240V 50 60 Hz 0 1A Work place Disco KTV Bars Clubs Family party etc 9 Trouble shooting PROBLEM TROUBLE SHOOTING Laser doesn t work Please check the power supply The laser light did not work Please increase or decreases with music or changed very the music volume or audio rapidly during Sound active sensitivity with sensitivity knob function The laser beam is at rest in Please contact dealer working mode If after trying the above solutions you still have a problem please contact your dealer or our company for service 10 Laser Safety Notes STOP AND READ ALL THE LASER SAFETY NOTES BELOW Laser Light is different from any other light source with which you may be familiar The light from this laser products can potentially cause eye injury if not set up and used correctly Laser light is thousands of times more focused than light from any other kind2. up and prior to public use test laser to ensure proper function Do not use if any defect is detected Neither use it if laser emits only one or two laser beams rather than dozens hundreds as this could indicate damage to the diffraction grating optic and could allow emission of higher laser levels above Class 3R Do not point lasers at people or animals at any time Never look into the laser aperture or laser beams Never point lasers in areas in which people can potentially get exposed such as uncontrolled balconies etc Do not point lasers at highly reflective surfaces such as windows mirrors and shiny metal Even laser reflections can be hazardous Never point a laser at aircraft as this is a federal offense Never turn the laser on and off in rapid succession Never point un terminated laser beams into the sky Do not expose the output optic aperture to cleaning chemicals clean with soft tissue and water or lens cleaner Do not use the laser if the housing is damaged open or if the optics appear damaged in any way Never open the laser housing as the high laser power levels inside of the protective housing can start fires burn skin and will cause instant eye injury Never leave this device running unattended The operation of a class 3R laser show is only allowed if the show is controlled by a skilled and well trained operator familiar with the data included in this manual The legal requi
3. Stagg User Manual Laser Show System LITE BEAM 1 General instructions Thank you for purchasing this product Please read this user guide for safety and operations information before using the product Keep this manual for future reference This product can create perfect laser programs and effects since it has passed a series of strict tests before delivery Please handle with care after receiving the unit and check the accessories listed on the page after opening the carton In the event of carton damage or accessories missing in transit please contact your dealer or our after sales service department Attachments 1 Laser Light 1PCS 4 Tripod 1 PCS 2 Power Supply 1PCS 5 Remote control 1 PCS 3 User Guide 1PCS 6 Safety key 2 PCS 2 Notice 1 Do not expose the eye directly to laser beam 2 Before using this unit makes sure the power supply is grounded 3 This unit is intended for indoor use only and should be prevented from making contact with water moisture and vibrations The working temperature of this unit is 18 30 C do not use continuously for over 4 hours otherwise it shortens the lifetime of the unit 4 Do not remove or break the warranty label otherwise it will void the warranty Installation operation and maintenance should A be done by a professional Gi Warning Do not expose the eye directly to the laser beam 3 Installation 1 Before installation please make sure the input voltage is con
4. form to the one marked on the unit 2 This product should be installed by a professional to make sure it is fixed safely and is adjusted to a suitable shining angle 3 When installing this unit please make sure there is nothing flammable or explosive within 0 5 meters of the unit Make sure there is 15 mm free space around the unit Please make sure to use safety rope which can support tenfold the weight of the unit to secure the mounting 4 Front Panel 7 Staggrs i O 7 0 Staggine Ob LITE BEAM 1 1 Infrared receiver 2 Laser Aperture 3 LED Aperture For model LITE BEAM 16 ONLY dod 1 Auto Music active switch 2 Fan 3 Power input connector 4 Safety Key 6 Remote Control a 1 POWER start or stop the device 0 2 SPEED faster gt fastest normal 3 COLOR green red gt green OHO and red gt no laser 4 AUTO A MUSIC auto gt music 5 PATTERN different patterns 6 MODE clockwise gt stop gt counterclockwise 000 A 7 Function amp Setting Sound Active The change of the laser pattern is controlled by sound that is the rhythm of the sound controls the changing of the laser pattern The laser diode will automatically turn off after 4 seconds when the music stops Auto Active Auto cycles the built in programs without being controlled externally It has no laser OFF Remote control Can select Sound or Music Active
5. of light source This concentration of light can cause instant eye damage primarily by burning the retina the light sensitive portion at the back of the eye Even if you cannot feel heat from a laser beam it can still injure or blind you or your audience Even tiny amounts of laser light are potentially hazardous even at long distances Injuries to the eye from laser light can happen quicker than you can blink It is wrong to think that because these laser entertainment products split the laser into hundreds of beams that are scanned out in high speed that an individual laser beam is not hazardous for eye exposure This laser product uses dozens of milliwatts of laser power Class 3B levels internally before it splits into multiple beams Class 3R levels many of the individual beams are potentially hazardous to the eyes It is also incorrect to assume that because the laser light is moving it is safe It is critical to prevent the possibility of any direct eye exposure since eye injuries can occur instantly In the laser safety regulation it is not legal to aim Class 3R lasers in areas which people can get exposed even if it is aimed below people s faces such as on a dance floor Read and understand all safety and technical data in this manual before operating the product Always set up and install laser effects so that all laser light is at least 3 meters 9 8 feet above the floor on which people can stand After set
6. rements for using laser entertainment products vary from country to country the user is responsible for the legal requirements at the location country of use at any time Always use appropriate lighting safety cables when hanging lights and effects overhead and secure these to a fixed mounting point Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136 1 Standard For Safe Use of Lasers available from the Laser Institute of America www laserinstitute org Many local governments corporations agencies military and others require all lasers to be used under the guidelines of ANSI Z136 1 Laser Display guidance can be obtained via the International Laser Display Association www laserist org Pour obtenir ce mode d emploi en Frangais veuillez vous rendre sur www staggmusic com Um die Gebrauchsanweisung in Deutsch zu erhalten gehen Sie bitte auf www staggmusic com Deze handleiding is beschikbaar in het Nederlands op www staggmusic com Para obtener este modo de empleo en espanol vayan sobre www staggmusic com www staggmusic com EMD Music 06 2012
Download Pdf Manuals
Related Search