1. Getting Started 2. Assembling the 2.5" SATA HDD 3
Contents
1. WELLAND 2 5 SATA to USB2 0 eSATA Enclosure Quick Install Guide 1 Getting Started Kit Contents 2 5 Enclosure Product Overview USB Y Cable eSATA cable 1 OTB Button iSATA to eSATA bracket cable 2 USB2 0 Port Installation CD 3 eSATA Port Screw Pack 4 DC Jack Carry Bag QIG Minimum System Requirements Available OHCl compliant USB port Windows 98SE ME 2000 XP VISTA 7 MAC OS 9 x and 10 x or higher Note eSATA mode isn t complaint with Windows 98SE ME 2 Assembling the 2 5 SATA HDD Step 1 Open the enclosure and take out the PCB Step 2 Insert SATA HDD into the SATA connector of PCB Step 3 Put in the screws and tighten SATA HDD Step 4 Position the PCB and HDD set carefully into the aluminium casing put the screws in and tighten them 3 Connecting the Drive Note If using Windows 9SSE you must install the device driver on your system before connecting the drive USB Connection 1 Connect one end USB A Type of the USB Y Cable to your computer 2 Connect the other end USB mini 5 of the USB Y Cable to the USB port on the back of the drive 3 The power indication LED on the front panel will illuminate and the presence of an external drive will be visible on your PC monitor or laptop eSATA Connection Note If using PC without eSATA interface please install the iSATA to eSATA bracket cable in your PC please make sure your PC or motherboard supports iSATA bef2. eady MAC is Find the Removable Disk icon associated with the drive that you want to disconnect and drag it to the Trash icon on your desktop 2 After the disk icon disappears from the desktop and the drive is powered off you may safely disconnect the USB cable from your computer 6 Remarks 1 The detailed installation manual can be found in the User Manual of the CD 2 The product is compliant with CE FCC UL RoHS WEEE Page 2
3. ore installation If using a laptop please make sure there is a built in eSATA or eSATA interface on your laptop 1 Connect the USB Y Cable between your PC and the enclosure this is to give power to the drive Read Write HDD through USB connection will be disabled while the eSATA cable is connected 2 Connect one end of the eSATA cable to your PC or Laptop 3 Connect the other end of the eSATA cable to your external enclosure 4 Installing OTB Software Note Please select proper OTB exe version for your computer before installation OTB supports Windows System only but doesn t support eSATA Mode 1 Put Installation CD ROM into the Optical Drive on your computer or laptop 2 Select the correct OTB software version and then follow the installation procedures 3 Once OTB is successfully installed on the computer or laptop an OTB icon will appear on the system tray of your computer Page 1 WELLAND 2 5 SATA to USB2 0 eSATA Enclosure Quick Install Guide 5 Disconnecting the Drive Caution To prevent data loss always be sure to close all active applications before shutting down the drive Windows 1 Double click the Safely Remove Hardware icon in your system tray typically located on the bottom right corner of your desktop 2 Select the appropriate device from the list and click Stop Click OK to confirm your selection of the drive to be disconnected 3 Click Close and ensure that the drive is powered off alr
Download Pdf Manuals
Related Search