USER MANUAL - Mega Systems
Contents
1. 1 512 0 255 0 255 0 255 0 255 0 255 0 15 0 15 0 15 0 15 0 15 Show Chase Sound Mode Sound Sensor Display Flip Temp Hours Used Dimming Curve On Off 0 15 0 9999 01 02 Il ILII Mode Setting amp DMX Address Mode A 5 Channels R G B LI 1 Mode b 6 Channels Dimmer R G B Strobe Macro Press Enter to select the desired mode setting from A b C d E EN Mode C 54 Channels R G B x 18 Mode d 6 Channels Dimmer R G B Strobe Macro Mode E 54 Channels R G B x 18 Use the up down keys to select the required DMX start channel Press Enter to confirm Red Dimmer This function allows you to dim the red LED s on the entire strip Press Enter use the up down keys to select desired dimmer settings Press Enter to confirm the settings 255 Steps es oto LII Green Dimmer This function allows you to dim the green LED s on the entire strip Press Enter use the up down keys to select desired dimmer settings Press Enter to confirm the settings 255 Steps Blue Dimmer This function allows you to dim the blue LED s on the entire strip Press Enter use the up down keys to select desired dimmer settings Press Enter to confirm the settings 255 Steps NES EIN White Dimmer This function allows you to dim the white LED s on the entire strip Press Enter use the up down keys to select desired dimmer settings Press Enter to confirm the settings 255 Steps ani 25 I IL Amber Dimmer This function allows you to dim t2. mega lite com info mega lite com
3. or distributor If purchase date cannot be provided date of manufacture will be used to determine warranty period Goods returned under warranty must follow the proper authorization procedure and must be accompanied by a copy of the original invoice and Return Authorization Number given by MSI Goods repaired under warranty will be returned to the owner with the freight prepaid by MSI via the most economical means of shipment Repair or replacement as provided for under this warranty is the exclusive remedy of the consumer MEGA SYSTEMS INC makes no warranties express or implied with respect to any product and Mega Systems specifically disclaims any warranty of merchantability or fitness for a particular purpose Mega Systems shall not be liable for any indirect inci dental or consequential damage including lost profit sustained or incurred in connection with any product or caused by product defect or the partial or total failure of any product regardless of the form of action weather in contract tort including negligence strict liability or otherwise and weather or not such damage was foreseen or unforeseen Warranty is void if the product is misused damaged modified in any way or for unauthorized repairs or parts This warranty gives you specific legal rights and you may also have other rights which vary from state to state MEGAG Mega Lite 5718 Kenwick St San Antonio TX 78238 Ph 210 684 2600 Fax 210 855 6279 www
4. to confirm the settings Sound Flash This function allows you to select the flash pattern that will triggered via audio Press Enter use the up down keys to se lect desired dimmer settings Press Enter to confirm the settings _ Sound Sensor This function allows you to select the sensitivity of the audio sensor Press Enter use the up down keys to select desired dimmer settings Press Enter to confirm the settings III Display Flip This function allows you to change the LED s on the entire strip from one color to another Press Enter use the up down keys to select desired color change speed settings Press Enter to confirm the settings 15 Steps IIL 1 1 Temp This function allows you to monitor the temperature of the fixture At 51 degrees Celsius the internal fan will engage The smart fan sped will increase depending on the temperature of the fixture Hours Used This function allows you to monitor the amount if time the fixture has been powered on Dimming Curve Press Enter to select the desired dimming speed Use the up down keys to select desired dimming fade speed settings from 1 to 2 On the 1 setting there will be zero delay time from fading of the LEDs On setting 2 there will be a gradual fading of the LEDs Press Enter to confirm the settings DMX Profile Drama Strip P840 Mode A DMX Chanel Function Description
5. MEGAG DRAMA STHIPIEEZSEKXEE USER MANUAL Table of Contents Safety Information 3 SPECHICALONS MEET 4 MISES 5 Main Power Connection 2 cccccceee ec ee ee eee eect ee ee ee eese I e esee e ener nen 6 DMX 512 Conrectlon uio met ecd eei u 2E To e RE EEE E dera TER NR EROR ide 6 Main Control Men s siiani iagi UELLE DEDI 7 DMX Profile s sesi EE 10 RIGGING the FIXUUPC cmm 12 Cleaning amp Maintemance 2 cccscceeeeseneceeeseteceeeeedhtecceeeeunteceneeebteneetdubaqeenedehaeeeeeedbanaeestiee 12 Parts List Check that the unit has not been damaged during transport Read all cautions and warnings prior to operation of this equipment Protection Against Fire Fire Maintain a minimum of 1 foot distance from any type of flame Replace fuse only with the specified type and rating Do Not install the unit to close to a heat source Make sure cable are properly secured away from unit movement Maximum surface operating temperature 140 D o e w o Protection Against Fire A Electrical Disconnect power before servicing For connection to main power supply proceed to page 6 This unit must be earthed electronically grounded Do not expose unit to rain or moisture Tuo Protection Against Mechanical Hazards 1 Use safety chain when hanging unit xt 2 Use quality clamps or bolts when positioning unit 3 Do not open unit while
6. Value 1 LED Color Red LED intensity 0 255 2 LED Color Green LED Intensity 0 255 3 LED Color Blue LED Intensit 0 255 0 255 0 255 Drama Strip P840 Mode B Value 0 255 2 LED Color Red LED intensity 0 255 3 LED Color Green LED Intensity 0 255 4 LED Color Blue LED Intensity 0 255 5 LED Color White LED Intensity 0 255 6 LED Color Amber LED Intensity 0 255 Drama Strip P840 Mode C Value 0 255 0 255 0 255 LED Color Blue LED Intensit 0 255 5 LED Color White LED Intensity 0 255 6 LED Color Amber LED Intensity 0 255 7 Strobe Strobe slow to fast 0 255 No Function 0 1 Color Fade Full Bar 2 16 Color Snap Full Bar 17 33 Macro Effect 1 34 50 Macro Effect 2 51 67 Macro Effect 3 68 84 Macro Effect 4 85 101 Macro Effect 5 102 118 8 Macro Macro Effect 6 119 135 Macro Effect 7 136 152 Macro Effect 8 153 169 Macro Effect 9 170 186 Macro Effect 10 187 203 Macro Effect 11 204 220 Macro Effect 12 221 237 Macro Effect 13 238 254 Macro Effect 14 255 10 Drama Strip P840 Mode D DMX Chanel Function Description Value LED Color Red LED intensity 0 255 LED Color Green LED Intensit 0 255 LED Color Blue LED Intensit 0 255 LED Color Red LED intensit 0 255 LED Color Blue LED Intensit 0 255 Drama Strip P840 Mode E DMX chanel Function Description Value LED Color Red LED intensit 0 255 LED Color Green LED Intensity 0 255 LED Color Blue LED Intensit 0 255 LED Color White LED Intensit 0 255 LED Color A
7. be considered during the inspection 1 All screws used for installing the device or part of the device have to be tightly connected and must not be corroded 2 There must not be any deformations on the housing fixation and installation spots ceiling suspension trussing 3 The electronic power supply cables must not show any damages material fatigue e g porous cables or sediments Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed Note There is no serviceable parts inside the device except for the LED s Maintenance and service operations are to be carried out by authorized dealers Replacing the fuse Only replace the fuse with the same type and rating Replacing the power cable If the power cable of this device becomes damaged it has to be replaced by author ized dealers or trained professional only In order to avoid hazards Should you have further questions please contact your dealer Parts List Accessories 4076 FH Fuse Holder 7040 LEDMOD LED Module with 8 LEDs 4076 KNOB Knob Set 12 Warranty Information Warranty Conditions Unless otherwise stated in writing your product is covered by a one year parts and labor limited warranty LEDs are not guaranteed to match in color temperature or output It is the owner s responsibility to furnish receipts or invoices for verification of purchase date and reseller
8. he amber LED s on the entire strip Press Enter use the up down keys to select desired dimmer settings Press Enter to confirm the settings 255 Steps _ Flash This function allows you to strobe the LED s on the entire strip on the selected color from the dimmer settings Press En ter use the up down keys to select desired flash settings Press Enter to confirm the settings 15 Steps Fade Scroll This function allows you to fade the LED s on the entire strip from the colors selected dimmer settings Press Enter use the up down keys to select desired fade speed settings Press Enter to confirm the settings 15 Steps l II Flash Scroll This function allows you to change the LED s on the entire strip from one color to another Press Enter use the up down keys to select desired color change speed settings Press Enter to confirm the settings 15 Steps Chase Effect This function allows you to select different chase patterns on the entire strip Press Enter use the up down keys to select desired chase settings Press Enter to confirm the settings Chase Speed This function allows you to select the speed of the chase that was selected on the Chase Effect Press Enter use the up down keys to select desired chase speed settings Press Enter to confirm the settings This function allows you to select the chase pattern that will be triggered via audio Press Enter use the up down keys to select desired Chase settings Press Enter
9. it is on risk of electrical shock Mechanical Technical Information Part Numbers Fixture 7040 Drama Strip P840 Mechanical Specifications DMX Connectors XLR 3 and 5 pin in out 41 75 Power Connections Power Con type in out Thermal Maximum ambient temperature 114 C Maximum surface temperature 140 C Display Digital Fastening System Floor Mounted or Single yoke with floor base Packaged for Shipping Size 41 75 x 3 x 4 65 Size 43 75 X 10 25 X 11 5 Weight 19 25 Ib Weight 23 5lb Electrical Specifications LED Quantity 8 x Penta COB Color LED Watts 40 each LED refresh rate 4 7k HZ flicker free LED Lifetime 60 000 to 100 000 hours LED Beam Angle 33 LED Field Angle 60 Power Consumption Universal 100 240V 50 60 Hz Ballast Electronic Watts 214 Amps 2 81 Control amp Programming Protocol DMX 512 DMX Channels 5 Modes of operation Mode A 5 Channel R G B W A Modeb 6 Channel Dimmer R G B W A Mode C 8 Channel Dimmer R G B Strobe Macro Moded 24 Channel R G B x 8 Mode E 40 Channel R G B W A x8 Operating mode Display preset setting Stand alone Color mix via display Viewing Angles Low Profile Up Light Adjustable Main Power Connection Caution 1 Do not connect fixture to a dimmer system 2 This unit has Auto switching power supply It will respond to 110V or 240V automatically 3 This unit must be earthed elec
10. mber LED Intensity 0 255 LED Color Red LED intensity 0 255 LED Color Green LED Intensit 0 255 LED Color Blue LED Intensity 0 255 LED Color White LED Intensity 0 255 40 LED Color Amber LED Intensity 0 255 11 Rigging the fixture Caution The installations must be carried out by an authorized dealer or trained professional Unit may cause severe injures if you have doubts concerning the safety do not install 1 2 3 Unit is to be 24inches away from flammable materials decoration material 4 Use high quality installation equipment to hang unit When rigging a unit it is very important that you follow common safety procedures Rigging requires extensive experi ence including but not limited to calculating working loads material being used and periodic safety inspections If you lack these qualifications do not attempt the installation yourself instead use a professional structural rigger When rigging the unit always be secured with a secondary safety attachment The installation location of the projector has got to be built in the way that it can hold 10 times the weight for 1 hour with out any harming Installation should be checked at least one time a year by a skilled person Cleaning and maintenance Installation Maintenance The operator has to make sure that the unit is operating safely and has the installa tions and electronics checked by an expert every 2 years The following points have to
11. tronically grounded 4 Replace fuse only with the specified type and rating The occupation of the connection cable is as follows This fixture is equipped with an electronic power supply that will let the unit operate from 100V to 220V from 50Hz to 60Hz Cable USA Cable EU 110V 110V 220V Connec Connec a an d DMX 512 Connection The fixture is equipped with 3 amp 5 pin XLR Sockets for DMX input and output The sockets are wired in parallel Only use a shielded twisted pair cable designed for RS 485 and 3 or 5 pin XLR plugs and connectors in order to connect the controller with the fixture or the fixture with another DMX input DMX output Caution At the last fixture the DMX signal needs to be terminated with a terminator Solder a 120 Ohm resistor between the and the signal into a 3 pin XLR plug and plug it in to the last fixture on the signal run Pre manufactured terminator plugs are availa ble for purchase from your Mega Lite dealer PDMX T Main Control Menu The control board on the fixture base is your interface to access and CONTROL BOARD control all the functions on the unit Its digital display gives you a code view of the options and functions The following will explain each func tion and its options e oe o Menu Up Down Enter DMX Address Red Dimmer Green Dimmer Blue Dimmer White Dimmer Amber Dimmer Flash Fade Scroll Color Scroll Chase Effect Chase Speed
Download Pdf Manuals
Related Search