ITNS-301- User Manual English
Contents
1. 2 Install film into negative film slot 3 Close the film holder Install the Roll Film into holder 1 Take out the roll film holder from package Roll Film Only 2 Insert roll film into film slot 3 Pull out the roll film in another side Roll Film Only Roll Film Only 4 lt To avoid a mirror image follow the serial numbers on top of film from left to right when installing negative film into holder m mgr BEBE EBEBEBER ERE Ee ee ee Figure 1 lt If the image is upside down see fig 2 the image can be corrected by the Flip function by pressing the function key on top of device before capture or applying the same function by entering playback edit menu after capture see fig 3 amp 4 SENS Figure 2 Down Flip button Flip hot key Press Flip hot key on top of device during live view Figure 3 e Flip function in playback mode menu Figure 4 III Quick Start Power button Up Mirror button OK button Down Flip button Film Slot MMC SD card Slot USB port TV out socket 1 Put Film onto the film cartridge 2 Insert the film cartridge into ITNS 301 3 Connect USB cable to ITNS 301 4 Turn on Device by power button 5 Press OK button to capture the image Note The scanner has 24MB of flash built in If there s no SD card inserted before starting the images will be saved onto the internal memory instead The images will be saved2. For continuously rotate 90 degrees move cursor to rotate again and press OK 1 7 Capture Cancel Playback captured image Or select Cancel and press OK button to cancel any of the editing step with present selected image ITNS 301 will return to live view mode 16 1 8 Capture Home Go back to main menu press OK button when select Home icon 1 9 Exit from Edit mode back to Capture mode Live View Next image in film cartridge Once the User presses OK button for save or cancel option display will return to capture mode live view Then user can move the film cartridge to next target film to capture 17 1 10 Memory full Once the internal memory or SD card is full user will see an SD card full icon appear press the OK button User has to download the images to a PC or replace with another SD card before continuing with image capture 1 11 SD card locked SD card locked indicator If the SD was locked press the OK button once an SD Card locked icon will display on screen Slide the switch on the SD card to unlock before inserting into device again 18 1 12 SD card error SD card error indicator If the scanner cannot detect an SD card in good condition a warning icon with a question mark will be shown on the display Please try to format the SD card or replace with another proper SD card before continuing with further operation For format function please refer to Setting section
3. onto an SD card while a card is inserted 6 Follow the menu on display for scanning 10 7 After finishing with the image capture take out the SD card with the stored images and insert into a device with an SD card slot 8 Or read picture from PC by USB mode Note lt gt For more detail information about USB mode please see section 4 USB Mode information on page 27 11 IV Operation Guide Home Main menu Capture Playback Film Type USB mode 1 Capture Capture Setting Capture capture mode default Playback playback mode Film Type define the film type which loaded in cartridge USB mode MSDC Mass Storage Device Class mode Setting TV out and format option After the welcome page above menu will remains for 5 sec User can press up down button for desired menu Or system will auto enter Capture mode if there is no action during this 5 second period 12 1 1 Capture Mirror Flip Hot key Up Mirror button Down Flip button Press Down Flip button to upside down image 13 1 2 Capture mode Live view indicator flashing at 0 5sec rate Once entering Capture mode there will be a red indicator on left top corner to indicate it is in live view mode When the film cartridge is inserted into the scanner slot the image always shows the positive image according to previous defined Film Type after power on the Film Type is default to negativ
4. Film Type and press OK to confirm 3 1 Film Type Select Film Type Color Negative film Slide film B amp W Negative e Negative film select Negative film when cartridge loaded with negative film Slide select Slide type when load slide in holder e B amp W film select B amp W when cartridge loaded with Black amp White negative film 25 3 2 Film Type Example vil WH SUC VETTE Bae Ss eeee ae Color Negative B amp W Negative Cartridge Slide 26 4 USB Mode USB mode After finishing with image capture the user can download the stored images from internal memory or SD card to PC by selecting USB mode Select USB mode in main menu and press OK button when the USB cable is connected to the PC ITNS 301 becomes a mass storage device and the user can read the images within the internal memory or SD card once PC has detected the external storage device Or just take out the SD card from device and place into a PC card reader to read the images on the SD card directly Note lt gt This scanner is Mac compatible through MSDC mode lt Apple Computer s Mac OX8 5 1 supports USB mass storage through an optional driver lt gt Mac OS9 and Mac OS X support USB mass storage natively 27 4 1 USB Mode Status Once the user selects USB mode ITNS 301 becomes a mass storage device and then a status icon shows on display then user can find an external USB disk device from My Computer and review
5. OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED INDURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above exclusions or limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state
6. on page 30 19 2 Playback Playback Press Down button to Playback mode when power on ITNS 301 or access the main menu by Home icon if during operation Press OK button to confirm the selection 2 1 Playback Auto Slide Show Slide show mode Once user enters Playback mode default to slide show 2 4 TFT will auto display all images stored on the SD card with 2 seconds intervals User can also stop the slide show mode by pressing the OK button once Then manually control the image playback by press up down button one by one 20 2 2 Playback Edit Menu Rotate 90 Rotate 90 Mirror Flip Rotate 90 captured image rotate 90 degrees Rotate 90 captured image rotate 90 degrees Mirror change image left to right Flip upside down image Exit returns to Slide show Delete delete this picture stored in SD card Save save the modified image onto SD card Home returns to main menu 2 3 Playback Slide mode gt Edit mode User can stop the slide show mode for a single picture playback by pressing the OK button once Pause of slide show Now user is able to scroll each picture one by one by the up down button Once user stops at a stored picture requiring changes press the OK button again to exit out of the edit mode for modification 21 2 4 Slide Show gt Single picture gt Edit mode gt ll Pause Slide show mode Single picture mode Edit mode Use Up Down button to scroll picture
7. the images within the internal memory or a PC with an SD card reader 5 Setting Mode Setting mode The setting mode covers TV out and format option User can connect the device to a TV and finish the operation with TV display Moreover the scanned images can be in playback mode on the TV display to share with family If the SD card was formatted by another device and not readable by scanner user can apply the format function in scanner to correct to the required format 28 5 1 Setting Mode TV out Format Exit e TV out select NTSC or PAL according to required interface e Format format internal memory or SD card e Exit returns to main menu 5 2 Setting TV out gt m When the user wants to switch the display from on device LCD to TV display the user can connect device to TV and select PAL or NTSC as required in TV out menu by OK button Then the TV display will show the same option for scanning operation Or directly enter playback mode to slideshow the captured images on TV 29 5 3 Setting Format If the internal memory or SD card requires format by scanner user can enter format mode by press OK button The default setting will be cancel format User can press OK button again to cancel the format or select confirm icon to confirm format the memory Note If there s no SD card inside device the internal memory will be formatted once process Format Instead if SD card is inser
8. e film Reconfirm the film position through the display before press OK button 1 3 Capture Edit Menu Save Selected image Rotate 90 Rotate 90 Cancel Home Save save captured image e Rotate 90 continue rotate 90 degrees e Rotate 90 continue rotate 90 degrees this is for adjusting the user who took the portrait picture Cancel cancel any editing with this image Home Back to main menu 14 1 4 Live View gt Capture Edit Menu Live View Capture Edit Menu Once pressing the OK button in live view the edit menu will appear When user presses the OK button again the current image will be saved onto SD card or internal memory The display will return to live view again 1 5 Capture Save Save Once user presses the OK button on top of ITNS 301 preview live view image will be selected and shown on the TFT There are 4 icons shown on the left side of the screen The Save icon will be highlighted for user to confirm the save option by pressing the OK button After the above step display goes back to live view mode preview See 1 4 15 1 6 Capture Rotate 90 degrees User can apply the up down button for further editing rotate 90 90 Once the user confirms rotate 90 degrees command they can press the OK button the image will be rotated 90 degrees and cursor will remain at Save Press OK button again will save the rotated image to SD card and the screen will return to live view
9. innovative technology ITNS 301 Patent Granted in Taiwan M347590 Patent Granted in Japan 3147795 User Manual Version 1 03 Sep 2009 II INI IV Unpack ITNS 30 I erreren rarene gate di atita ada aaa aa da ta 2 Install film into the film holder neo eo eee eoeeeeeeee 3 QUICK StA iacitiaima zale osia ude ia uia eine inaoaia ata aaa aa ten Deea aici 7 Operation Guide sessesesesesesosocoecsesesosoeoccoecesososcececeoee 12 Specificato ss ae is atei ua dual aa NECETE ENEE ETEA 32 Unpack ITNS 301 ITNS 301 Negative Slide Film Holder User Manual gt AC Power Adaptor USB Video Cable Roll Film Holder Cleaning Brush Note lt gt We strongly suggest using a clean dry non alcohol cotton swab to clean the glass surface periodically to produce a clear image during operation Clean dust from FilmScanner back light to use the clean brush to wipe the dust Dust or dirt from the negative slide films and cover trays may affect the scanned image quality please make sure the materials are cleaned before inserting into the scanner Please find recommend processional purger from photo store to clean the dust on films if any to avoid damaging the only one copy of old films Il Install film into the film holder Install the Slide into holder 1 Open the slide holder as illustrated Install the Negative Film into holder 1 Open the film holder as illustrated
10. nly for a total period of One Year from the date of the original purchase The warranty does not cover cosmetic damage antennas AC cords cabinets headbands ear pads or damage due to line power surges connection to improper voltage supply or settings misuse mishandling accident acts of God or attempted repair by an unauthorized service agent To obtain service the original purchaser MUST present a sales receipt proof of purchase indicating date of purchase amount paid and place of purchase Send the unit prepaid to the address below in the original packaging or reasonable substitute to prevent damage You Must include your full name shipping address and telephone number No return will be shipped back to a PO Box Please include your check or money order in the amount of 12 00 payable to Innovative Technology Electronics Corp to cover handling and return shipping charges IT will not be responsible for delays or unprocessed claims resulting from a purchaser s failure to provide any or all of the necessary information Send all inquires or returns to Customer Service Dept Innovative Technology Electronics Corp 4 Anchor Way Port Washington NY 11050 Tel 1 877 ITECH 97 1 877 483 2497 EMAIL support ithomeproducts com There are no express warranties except as listed above REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER IT SHALL NOT BE LIABLE FOR ANY INCIDENTAL
11. on between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help If you cannot eliminate the interference the FCC requires that you stop using your device Statement that the product complies with Part15 i e This device complies with Part15 of FCC Rules Operation is subject to following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation CALIFORNIA PROP 65 WARNING WARNING This product contains chemicals known to the State of California to cause birth defects or other reproductive harm For more information on these regulations and a list of chemicals log on the following website address http www oehha ca gov prop65 html Innovative Technology Electronics Corp Limited Warranty 90 Days Labor One Year Parts Innovative Technology Electronics Corp IT warrants the product to be free from Defects in materials under normal use for a period of One Year from the date of the original purchase The Warranty is Not transferable IT agrees within the initial 90 Day period to repair the product if it is determined to be defective at No Charge It is further agreed that IT will cover the cost to repair or replace damaged Parts o
12. ted in device SD card will be formatted 6 Good bye page Good bye 30 V Specification 5 mega CMOS sensor F No 2 0 4 Glass elements 2 4 Color TFT LCD B USB 2 0 TV out video 3 5mm socket USB Configuration Mass Storage Device Class MSDC Power 5V supplied adaptor or USB port power AC Adaptor Model HNBO50100U Input 100 240V 50 60Hz 0 15A MAX LPS Output 5 0 1 0A UL CUL Listed E305498 82x86x152mm 0 41kg SD MMC compatible also supports SDHC 31 FCC WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception If this equipment does cause harmful interference which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Move the transmitter to a different physical location Increase the separati
13. to be modified 2 5 Playback Rotate Mirror Flip Save If the user wants to Rotate 90 degrees press the OK button when the cursor has selected the Rotate 90 option The image will be rotate 90 degrees and cursor will remain at Save after each action Press OK button to save modified result and next picture will be shown N 1 To continue to Rotate 90 degrees move cursor to Rotate option again and follow the same procedure above Please follow the same procedure for Rotate 90 Mirror and Flip function 22 2 6 Playback Exit Once user selects the EXIT function in edit menu the display will go back to slide show starting with the current picture in internal memory or SD card without saving any changes to the present picture 2 7 Playback Delete Delete will delete the present selected picture and next picture will be shown N 1 Cursor goes to Exit icon after delete If user intend to process continuously delete just move to the delete icon again and press OK to confirm 23 2 8 Playback Home Go back to main menu press OK button when select Home icon 2 9 Playback No Picture If there s no picture inside internal memory or SD card when entering playback mode a No picture symbol will appear on the display 24 3 Film Type Film Type Change film type definition by entering Film Type menu when power ITNS 301 or access the main menu by Home icon if during operation Press down button for
Download Pdf Manuals
Related Search