DVD-12ef(s)2 DVD-12ef(s)1
Contents
1. DVD elektronik DESCRIPTION Embedders DVD 12ef 2 SDI Frame sync and 2ch AES EBU embedder Broadcast quality Synchronize digital video and embeding digital audio EDH processing Input signal presence detection Pass Freezing or broadcast test in the case of incorrect video input Easy setup with local control and LCD display Audio embedder Balanced unbalanced digital audio inputs 24bit 48kHz sampling and processing DVD 12ef 2 have a frame synchronizer that asynchronous video signal recorded in the memory and reads it synchronized with an external reference as well as other settings It is useful for sychronizing large number of external signals with signals from the TV station or the capture of material from an amateur into a professional format DVD 12ef 2 is synchronous switch tolerant RP 168 for a smooth transfer without unpleasant visual effects when switching between two sources DVD 12ef 2 is high quality embedder designed to insert two 24 bit digital audio signals into digital video The device has a level adjustment change the audio phase and selection of channel place The module is placed in the SRU 306 3RU chassis with capacity of 6 modules Also the device is available in standalone version TECHNICAL SPECIFICATIONS GENERAL INFORMATION a2 86 e E E NE E A E E 005 860 SE ell ATE E N S T 0 4 Kg 2 KEE module DIMENSIONS wieicasseseaeasncteasheons sannmndivcsmcaniensieanwaie 100 x 160mm2. DVD Sams elektronik doo e sams sams rs e www sams rs 23 lef elektronik Embedders 12 CHANNEL 3 SOURCE This menu is used to determine the signal source for channel 3 The options are INPUT 1 INPUT 2 INPUT 3 INPUT 4 The default setting is INPUT 3 Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN Menu Channel 3 Source Once you have selected the option press the MENU BACK button Option is temporarily saved 13 CHANNEL 3 LEVEL This menu is used to determine the signal level for channel 3 The options are 6dB to 6dB The default setting is OdB Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN Menu Channel 3 Level Once you have selected the option press the MENU BACK button Option is temporarily saved 14 CHANNEL 3 POLARITY This menu is used to determine the signal polarity for channel 3 Options are NORMAL and INVERT The default setting is NORMAL Select an option by pressing the UP DOWN keys OK SAVE UP onMEZ MENU BACK DOWN EER Menu Channel 3 Polarity Once you have selected the option press the MENU BACK button Option is temporarily saved 24 Sams elektronik doo e Sams sams rs e www sams rs DVD z A Embedders elektronik 15 CHANNEL 4 SOURCE This menu is used to determine the signal source for channel 4 The options are INPUT 1 INPUT 2 INPUT 3 INPUT 4 The
3. ORDERING INFORMATION Code Name Description AES3 1 mg bt AES 005 863 DVD 12efs 1 SDI FS ICH AES embedder Ea 10 Sams elektronik d 0 0 e Sams sams rs e www sams rs DVD Glen elektronik E m bedders MODULE INSTALATION IN SRU RACK FRAMES On the front side of rack frame unscrew the screws Open the door Make sure that the module is set to the correct place in relation to the back connector BEFORE INSTALLING OR REMOVING THE MODULE FROM SRU ALWAYS TURN OFF THE POWER Lock module with lever to the position NOTE NEVER PLACE MODULE TO PLACE OF THE POWER SUPPLY MODULE WARNING FOR POWER SUPPLY ONLY The label that indicates the place for power supply module DVD Sams elektronik doo e sams sams rs e www sams rs 11 Glen Em bedders elektronik 1 The module set between the guides not metal plate 2 Locking lever mount behind the groove 3 Push the lever to lock in an upright position The module is locked 12 Sams elektronik d 0 0 e sams sams rs e www sams rs DVD Glen elektronik Embedders BACK CONNECTORS n l DVD 12e OH 3 lt WARNING 2 EE AT THE SAME TIME a gt N 2 AES 1109 IN B gt xK AES 110Q IN ZA gt len GE G DVA 12ef Connector for B channel on DVD 12ef 1 is not present Fix the back connector with M2 5 screw SDI INPUT SDI OUTPUT AES 7592 IN A AES 75Q INv B EXTERNAL REFERENCE p
4. Required sek SRU rack frame back panel BCVA 84 Delivery includ s cccccscssseseeeeeeeeeees device user manual DIGITAL INPUT NUMDO apon ee eect er ert 1 BNC female s NVDO ersa Serial digital SMPTE259M Tune Ee 75Q D 800mV 10 DIGITAL OUTPUT NUIMDS ee eeeg ge edeee eege Ee EENS 1 BNC female lt SIC hee Serial digital SMPTE259M ei Lu ee Ee ie EE 75Q Jitter lt 0 2UI Tipical 0 1UI Color Bar 10Hz filter mode el BEE 800mV 10 AES3 1100 or 759 INPUT S Ile 2 CONMECIOR vgeesgeggegsgieen 3 pin terminal strip or BNC female Lu ere ee E 110 or 75Q Max IEVEl KE 7V p p MIP TOV E E E E A E E A A sina gens nevarendie 0 2V p p NOTE AES and SPDIF are not used at the same time REFERENCE INPUT Analog BB 300 MV sssssssssssssssssnnrnsrnrnnrnsnnnnnnnnnennnnnnes 1 BNC OUTPUT PERFORMANCE ll Elei EEN 10 12bit processing Black Eengel Self adjusting H adjustment range cccecceeeeeeeeaes 0 64us in 37ns steps V adjustment range sessen 0 625 lines in 1 line step ORDERING INFORMATION Code Name 005 860 DVD 12ef 2 001 510 BCVA 84 001 605 SRU 306 Description SDI FS 2CH AES embedder Back connector Rack frame for 6 modules Specifications and designs are subject to change without notice POWER VOCS aa a E 2 x 12V AC POWETF eebe EE EE 5W TEMPERATURE Bertormance NN 5 40 C ODE AUG scntorsemirveiaceseenaresiaresassapsrereeersrsasserneeneaeds 0 50 C BACK
5. TECHNICAL SPECIFICATIONS GENERAL INFORMATION OO E E ce ee mere cma mea enne 005 862 A ell e E 0 4 Kg e e A A T A T E module s DIMENSIONS wieicasseseaeasncteasheons sannmndivcsmcaniensieanwaie 100 x 160mm Required sek SRU rack frame back panel BCVA 84 Delivery includ s cccccscssseseeeeeeeeeees device user manual DIGITAL INPUT NUMDO apon ee eect er ert 1 BNC female s NVDO ersa Serial digital SMPTE259M Tune Ee 75Q D 800mV 10 DIGITAL OUTPUT NUIMDS ee eeeg ge edeee eege Ee EENS 1 BNC female lt SIC hee Serial digital SMPTE259M ei Lu ee Ee ie EE 75Q Jitter lt 0 2UI Tipical 0 1UI Color Bar 10Hz filter mode el BEE 800mV 10 AES3 1100 or 759 INPUT S Ile 1 CONMECIOR vgeesgeggegsgieen 3 pin terminal strip or BNC female Lu ere ee E 110 or 759 Max EVE KE 7V p p MIP TOV E E E E A E A Spina sina gens nevarendie 0 2V p p NOTE AES and SPDIF are not used at the same time REFERENCE INPUT Analog BB 300 MV vawssscrsunteicdainacimanacineuiuanbesautevaned 1 BNC OUTPUT PERFORMANCE ll Elei EEN 10 12bit processing Black Eengel Self adjusting H adjustment range cccecceeeeeeeeaes 0 64us in 37ns steps V adjustment range sessen 0 625 lines in 1 line step ORDERING INFORMATION Code Name 005 862 DVD 12ef 1 001 510 BCVA 84 001 605 SRU 306 Description SDI FS 1CH AES embedder Back connector Rack frame for 6 modules Specifications and designs are subject
6. default setting is INPUT 4 Select an option by pressing the UP DOWN keys OK SAVE UP e EES MENU BACK DOWN Menu Channel 4 Source Once you have selected the option press the MENU BACK button Option is temporarily saved 16 CHANNEL 4 LEVEL This menu is used to determine the signal level for channel 4 The options are 6dB to 6dB The default setting is OdB Select an option by pressing the UP DOWN keys OK SAVE UP ER MENU BACK DOWN ERER Menu Channel 4 Level Once you have selected the option press the MENU BACK button Option is temporarily saved 17 CHANNEL 4 POLARITY This menu is used to determine the signal polarity for channel 4 Options are NORMAL and INVERT The default setting is NORMAL Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN ES Menu Channel 4 Polarity Once you have selected the option press the MENU BACK button Option is temporarily saved DVD Sams elektronik doo Sams sams rs e www sams rs 25 sadaf mS Em bedders elektronik 18 SETTINGS After setup within the available menu options it is temporarily recorded in the memory The number next to Setting means that the bank is loaded into memory When the device is set select SETTING menu press the OK SAVE to open the options menu and select one of four banks to record SaveMem1 SaveMem2 SaveMem3 and SaveMem4 Th
7. is NORMAL Select an option by pressing the UP DOWN keys OK SAVE UP ofRER MENU BACK DOWN EN Menu Channel 1 Polarity Once you have selected the option press the MENU BACK button Option is temporarily saved 22 Sams elektronik doo e Sams sams rs e www sams rs DVD z A Embedders elektronik 9 CHANNEL 2 SOURCE This menu is used to determine the signal source for channel 2 The options are INPUT 1 INPUT 2 INPUT 3 INPUT 4 The default setting is INPUT 2 Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN Menu Channel 2 Source Once you have selected the option press the MENU BACK button Option is temporarily saved 10 CHANNEL 2 LEVEL This menu is used to determine the signal level for channel 2 The options are 6dB to 6dB The default setting is OdB Select an option by pressing the UP DOWN keys OK SAVE Up MENU BACK DOWN WI Menu Channel 2 Level Once you have selected the option press the MENU BACK button Option is temporarily saved 11 CHANNEL 2 POLARITY This menu is used to determine the signal polarity for channel 2 Options are NORMAL and INVERT The default setting is NORMAL Select an option by pressing the UP DOWN keys OK SAVE UP TE MENU BACK DOWN Menu Channel 2 Polarity Once you have selected the option press the MENU BACK button Option is temporarily saved
8. ventilation openings This product is powered by AC 230V 10 50Hz 10 This product is equipped with a three wire cord with grounding 11 This device is equipped with a protective fuse in the power outlet Do not bypass fuse 12 Do not replace the fuse Replacement can be made by a person authorized by the manufacturer 13 Do not bend the power cord so that it can be damaged 14 Connect connectors as in the enclosed instructions Deviations from the allowed values predicted for the inputs and outputs of the device can cause severe damage and warranty void 15 Do not use the device in an environment that contains flammable or explosive materials in any physical state 16 Turn off the power corde before cleaning Do not use liquid aerosol or flammable cleaners Use only a dry cloth 17 Servicing is performed by a qualified person Removing the cover user is exposed to high voltages 18 Never use the device when the cover is open and the device is powered on 19 Do not expose to extreme high or low temperatures 20 Do not expose to sudden temperature changes 21 Call service in the following cases The power cord or plug is damaged Liquid or foreign objects is inside the device The machine is exposed to water and moisture The device does not function according to specification The unit has been dropped or damaged The characteristics are significantly changed 22 Use only specified replacement parts 23 Profe
9. 1 INPUT 2 INPUT 3 16 INPUT 4 CHANNEL 4 LEVEL 6 00 dB 0 00 dB 6 00 dB 17 CHANNEL 4 POLARITY me INVERT 18 SETTINGS SAVE MEM 1 4 Loan MEM 1 4 FACTORY 1 HORIZONTAL VERTICAL BLANKING This menu is used for pass remove information that is contained in the horizontal and vertical blanking Choose one of options PASS ALL allow all the information contained in the horizontal embedded audio and vertical blanking from 6 to 22 lines KILL ALL remove all information contained in the horizontal and vertical blanking The factory setting is PASS ALL Select an option by pressing the UP DOWN keys OK SAVE UP e ERR MENU BACK DOWN Te Menu HV Blank Once you have selected the option press the MENU BACK button Option is temporarily saved 2 HORIZONTAL POSITION This menu is used to adjust the horizontal phase of the output video signal Horizontal phase shifts in the intervals 37ns half of one pixel up to a maximum of one video line 63 963us During the change in value it may cause short term image disturbance in monitor due to the transition to a new time The factory setting is 0 000us Select an option by pressing the UP DOWN keys OK SAVE UP ofRER MENU BACK DOWN H Menu Horisontal position Once you have selected the option press the MENU BACK button Option is temporarily saved 20 Sams elektronik doo e Sams sams rs e W
10. AL REFERENCE This menu is used to select externe reference Select an option BBANALOG analog reference hardware option presence required SDI digital reference reserved for future use do not use The factory setting is BBANALOG Select by pressing the UP DOWN keys maat WP Or MENU BACK DOWN EER Menu External reference Once you have selected the option press the MENU BACK button Option is temporarily saved DVD Sams elektronik doo Sams sams rs e Www sams rs 21i lef Em bedders elektronik 6 CHANNEL 1 SOURCE This menu is used to determine the signal source for channel 1 The options are INPUT 1 INPUT 2 INPUT 3 INPUT 4 The default setting is INPUT 1 Select an option by pressing the UP DOWN keys OK SAVE Up MENU BACK DOWN a 4 j Menu Channel 1 Source Once you have selected the option press the MENU BACK button Option is temporarily saved 7 CHANNEL 1 LEVEL This menu is used to determine the signal level for channel 1 The options are 6dB to 6dB The default setting is OdB Select an option by pressing the UP DOWN keys OK SAVE UP e EE MENU BACK DOWN WR WR Menu Channel 1 Level Once you have selected the option press the MENU BACK button Option is temporarily saved 8 CHANNEL 1 POLARITY This menu is used to determine the signal polarity for channel 1 Options are NORMAL and INVERT The default setting
11. BNC BBREFIN eg nn AES3 1 AES ORDERING INFORMATION Code Name Description AES3 Fey mg bt AES 005 861 DVD 12efs 2 SDI FS 2CH AES embedder Ea Sams elektronik d 0 0 e Sams sams rs e www sams rs DVD sda mS DVD elektronik Embedders DVD 12ef 1 SDI Frame sync and ich AES EBU embedder Broadcast quality Synchronize digital video and embeding digital audio EDH processing Input signal presence detection Pass Freezing or broadcast test in the case of incorrect video input Easy setup with local control and LCD display Audio embedder Balanced unbalanced digital audio inputs 24bit 48kHz 1 ch sampling and processing DVD 12ef 1 have a frame synchronizer that asynchronous video signal recorded in the memory and reads it synchronized with an external reference as well as other settings It is useful for sychronizing large number of external signals with signals from the TV station or the capture of material from an amateur into a professional format DVD 12ef 1 is synchronous switch tolerant RP 168 for a smooth transfer without unpleasant visual effects when switching between two sources DVD 12ef 1 is high quality embedder designed to insert one 24 bit digital audio signal into digital video The device has a level adjustment change the audio phase and selection of channel place The module is placed in the SRU 306 3RU chassis with capacity of 6 modules Also the device is available in standalone version
12. CONNECTOR BCVA 84 WARNING fE BLOCK DIAGRAM AUTO EQ SYNC PROC AUTO EQ AUTO EQ FRAME boren ES TRS masx CLOCK worDctock si CLOCK BB REF IN AES3 1 AES RECEIVER RECEIVER AES3 2 Sams elektronik doo e Sams sams rs e www sams rs sadaf mS Embedders elektronik DVD 12efs 2 SDI Frame sync and 2ch AES EBU embedder Broadcast quality Synchronize digital video and embeding digital audio EDH processing Input signal presence detection Pass Freezing or broadcast test in the case of incorrect video input Easy setup with local control and LCD display Audio embedder Balanced unbalanced digital audio inputs 24bit 48kHz sampling and processing DVD 12efs 2 have a frame synchronizer that asynchronous video signal recorded in the memory and reads it synchronized with an external reference as well as other settings It is useful for sychronizing large number of external signals with signals from the TV station or the capture of material from an amateur into a professional format DVD 12efs 2 is synchronous switch tolerant RP 168 for a smooth transfer without unpleasant visual effects when switching between two sources DVD 12efs 2 is high quality embedder designed to insert two 24 bit digital audio signals into digital video The device has a level adjustment change the audio phase and selection of channel place front s
13. ENGLISH Z10 3 edition 1 Code 005 860 005 861 005 862 005 863 DVD 12ef s DVD 12ef s SDI in out with FSync and AES embedder for SRU rack frame standalone USER MANUAL FOR USE AND MAINTENANCE Read the instructions before using the device Keep this manual for periodic usage sdms m Sams elektronik doo 48 Zivka Davidovica st 11050 Belgrade Serbia Tel Fax 381 11 3806 253 381 11 2402 212 sams sams rs www sams rs Copyright 1999 2014 Sams elektronik doo Published 16 april 2013 Updated 08 august 2014 sda mS Em bedders elektronik WARRANTY Dear User Thank you very much for purchasing our product Your purchase is a wise investment The equipment you have purchased is manufactured with great care from high quality parts and materials It is designed to fully meet the needs according to specifications if properly installed used and maintained according to the enclosed instructions Any technical failure or deficiency that occurs during the warranty period specified on the invoice of the purchased equipment will be inspected and serviced by Sams elektronik doo or an authorized service center of the manufacturer with the conditions set out in the warranty statement THIS DEVICE IS INTENDED FOR PROFESSIONAL USE WARRANTY STATEMENT 1 Product has declared characteristics Within the warranty period manufacturer ensures the removal of technical failures product defects o
14. R ARA ANERER 20 2 HORIZONTAL POSITION EN 20 3 VERTICAL POSITION ME 21 ae ERROR MODE E 21 5 EXTERNAL ees 21 6 CHANNEL L SOURCE E 22 Fe CAINE TEEVEE rE E E E E EE E 22 8 CHANNEL 1 POLARITY NNN NNN ANNER ANNER NNN 22 J TPN ee OR tee 23 10 CHANNEL EE ee EEN 23 E CRANNEL EE eet 23 1 CAANNEC O SOURCE EE 24 13 CHANNEL A AT E 24 P COPANO LL E 24 15 CHANNEL 4 SOURCE en ene eee ee re ee ee ee te eee er er ee 25 1O COPA Webs A LEVEL EE 25 KAARTEN 25 dt ET ee EE 26 KIK 26 DVD Sams elektronik doo Sams sams rs e www sams rs 5 Embedders sadaf mS elektronik UNPACKING AND INSTALLATION The box contains Module Back connector optional Protective pad for SRU rack frame optional M2 5x6 7985 screw optional SRU rack frame optional Power corde for SRU rack frame optional User manual optional Before use check the contents of the box For any deficiency report to the seller or the manufacturer of the product DEVICE IS INSULATED BY PROTECTIVE WRAP AND PACKED IN A CARDBOARD BOX DEVICE IS SENSITIVE TO SHAKES AND DROPS HANDLE WITH CARE DURING TRANSPORT AND ASSEMBLY Check if the product is damaged during transport PROCEDURES FOR SAFE USE OF THE DEVICE il Places for fastening MAINTENANCE The system maintains only person authorized by Sams elektronik doo Any voluntarily opening device upgrading or servicing is strictly prohibited and is subject to warranty void and the possi
15. bility of injury REMOVAL AND STORAGE 1 E a yn If the device is not supplied with SRU rack frame remove the protective wrap from the device If the device is supplied with SRU rack frame remove the protective wrap from the chassis For devices that are AC 230V 50Hz powered the device is supplied with power cord Use only power corde that comes with the device SRU rack frame is mounted in a 19 special purpose rack cabinets designed for this type of device Screw device with four screws Screws for fastening are not supplied with the device The device must be connected to ground A device that is not connected to the grounding does not function properly according to factory declarations and can cause adverse effects on users and other equipment Strictly comply to all steps for proper connection of devices in the system On the SRU rack frame are 3 types of mass CHASSIS MAINS and OV The factory all three are connected According to the user s needs the masses can be switched over between them Before dismantling the device switch off the power remove the power cord and remove all other connectors Remove the four screws for fastening Remove the device from rack cabinet Wrap the machine in the foil to protect it from dust Package it in a box The device must be stored in a room without moisture Illustration mounted device Sams elektronik doo e Sams sams rs e www sams rs DVD sda mS
16. e device can record 4 different settings After selecting a bank press OK SAVE The display will print SAVED If you want to stay in this menu press the UP DOWN keys and to exit the MENU BACK button In this menu there are options LoadMem1 LoadMem2 LoadMem3 and LoadMem4 or options to load settings After selecting a bank press OK SAVE The display will print LOADED If you want to stay in this menu press the UP DOWN keys and to exit the MENU BACK button Option FACTORY set default settings in the currently active bank Press the OK SAVE On display will print RESETIED If you want to stay in this menu press the UP DOWN keys and to exit the MENU BACK button OK SAVE WP Q ai MENU BACK DOWN Gm ie Menu Settings NOTES 26 Sams elektronik doo e Sams sams rs e www sams rs DVD
17. er to the presence of high voltage In poor conditions the user may be exposed to shock The symbol exclamation mark in a triangle is to alert the user to comply by the terms of use in user s manual which is supplied with the device CLASS I DEVICE Grounding is connected to the chassis of the device The power supply is protected with fuse against overload A DECLARATION OF CONFORMITY for product SRU RACK FRAME WITH POWER SUPPLY PSU 212 WITH CORRESPONDING MODULES AND BACK CONNECTORS The product is designed and manufactured according to the following regulations Electromagnetic Compatibility Directive EMC Low Voltage Directive ELV Documentation confirming statements can be obtained on written request for review DVD Sams elektronik doo Sams sams rs e www sams rs 3 sda mS Em bedders elektronik WARNING TO AVOID ELECTRIC SHOCK DO NOT OPEN COVER DEVICE MAINTENANCE REQUIRES PROFESSIONAL PERSON AUTHORIZED BY THE MANUFACTURER 1 Read all safety and operating instructions before using the device 2 Keep all safety and operating instructions 3 Follow the instructions from the user manual 4 Do not upgrade device except in the case advised by the manufacturer 5 Do not use the device in the presence of water and or moisture 6 7 8 9 Do not pour water or moisten the device with any type of liquid Openings on device are provided for ventilation Do not block air flow through the
18. erence and input signal e ORANGE freeze function is on RED ORANGE flashing freeze function is on and no input signal ses GREEN ORANGE flashing freeze function is on and no external reference se RED GREEN ORANGE flashing freeze function is on and no input signal and external reference 3 Display 4 _MENU BACK push button enter the menu from status mode exit from the submenu 5 UP push button Frame Freeze choose the value in the submenu freezes the image in the status mode 6 DOWN push button choose the value in the submenu ERRORS WITH CONNECTIVITY AND STATUS No input signal If you notice that the LED flashes red verify that the incoming signal is correct or check if the incoming Signal cable is properly connected DVD Sams elektronik doo e Sams sams rs e WWW Sais Fe 17 Glen Em bedders elektronik No reference signal If you notice that the LED flashes green check if the external reference signal cable is properly connected e KAES TA The image is frozen The status mode pressing the button UP the picture freezes FACTORY SETUP HV BLANK PASS ALL H POS 00 000us V POS 0 lines ERROR MODE FIELD 1 EXT REF BB Analog CHAN 1 SRC INPUT 1 CHAN i LVL 0 00 db CHAN 1 POL NORMAL CHAN 2 SRC INPUT 2 CHAN 2 LVL 0 00 db CHAN 2 POL NORMAL CHAN 3 SRC INPUT 3 CHAN 3 LVL 0 00 db CHAN 3 POL NORMAL CHAN 4 SRC INPUT 4 CHAN 4 LVL 0 00 db CHAN 4 POL NORMAL MENU To
19. ers to set the J1 and J4 This DVD Sams elektronik doo e Sams sams rs e www sams rs 15 sdf mS elektronik Embedders INSTALLATION STANDALONE For the best signal quality use Belden 8281 or better coaxial cable for analog video Belden 1694A or better coaxial cable for digital video Connect the power cord The device works only on AC 230 V 50 Hz D OUTPUTI DI INPUT Dp DARA f f Jj S EXT REF ICAL ZARD el Q O www sams rs Made in Serbia DVD 12es CODE 005 823 FUSE 500mA Rear side Turn on the device Connect all necessary connectors by pressing switch before the unit is turned on Connectors on rear side O 6 J3 td AES inputs 4334 1X3 yndjno je yndul IAS NOTE Presence of External Reference is required EMBEDER OK SAVE UP DVD 12e d E MENU BACK F SDI and 2ch AES audio embeder Front side If everything is OK the LED will glow green 16 Sams elektronik doo e Sams sams rs e www sams rs DVD lef elektronik Embedders THE DEVICE FUNCTIONS a STATUS mode When you turn on the device and if it is properly connected the status is displayed 1 OK SAVE push button enters the submenu saving 2 STATUS LED e GREEN the device is in normal mode gt GREEN flashing no external reference gt RED flashing has a external reference but there is no input signal lt RED GREEN flashing no external ref
20. ide ZS eege TECH NICAL SPECI FICATIONS Specifications and designs are subject to change without notice GENERAL INFORMATION OUTPUT PERFORMANCE See E 005 861 Bit resolUtiOn eege eegeedeEeEgerg 10 12bit processing SNE e T 1 5 Kg Black offset catcnstesatanotenernsiaaieeoiessteunesantenniet Self adjusting D a aunsanbanmunasecewat des IRU rack frame H adjustment range sseseceeeeeeeees 0 64us in 37ns steps ee E EE Sieg 19 x eh V adjustment range ccceceeeeeees 0 625 lines in 1 line step Delivery includes evice power corde user manua DIGITAL INPUT aida e Lee 230V AC 10 S ller 1 BNC female EE 30W Signal type RENE Serial digital SMPTE259M PSU CNC r AEE 50Hz ellen Eet JD Overload protection front Mounted Circuit Breaker e BE 800mV 10 DIGITAL OUTPUT Lianne EEGEN 5 40 C e linn ls E A aan cva rman enamnenneean 1 BNC female Operating ee 0 50 C ee el E EE Serial digital SGMPTE259M SITIO CONC vaaraa aAA AEAEE E T 75Q Jitter lt 0 2UI Tipical 0 1UI Color Bar 10Hz filter mode DEE 800mV 10 AES3 1100 or 752 INPUT GV Tun le 2 SEET geen XLR female or BNC female Lu et ne ca udadaatduseaaaduned tate oweeeaneeneceee ene 1109 or 759 SAMAK NOV KE 7V p p MIT NV E 0 2V p p BLOCK DIAGRAM NOTE AES and SPDIF are not used at the same time SDI IN RECLOCKER J FRAME bond EA EDH _fprIvER REFERENCE INPUT SLB un Heej jeene E evezve res EE SDI OUT SR 1
21. lity embedder designed to insert one 24 bit digital audio signal into digital video The device has a level adjustment change the audio phase and selection of channel place rear side TECH NICAL SPECI FICATIONS Specifications and designs are subject to change without notice GENERAL INFORMATION OUTPUT PERFORMANCE See E Haeren 10 12bit processing e Li E 1 5 Kg Black offset EE Self adjusting D a aunsanbanmunasecewat des IRU rack frame H adjustment range sssseceseeeeeeees 0 64us in 37ns steps s ee E EE Sieg 19 x eh V adjustment range seses 0 625 lines in 1 line step Delivery includes evice power corde user manua DICHAL INPUT Ge elle E 230V AC 10 S ller 1 BNC female EE seset enee eeeggeegueeegeeg eege 30W Signal type RENE Serial digital SMPTE259M SFOGO V a E 50Hz ellen Eet JD Overload protection s front Mounted Circuit Breaker e BE 800mV 10 DIGITAL OUTPUT Lianne EEGEN 5 40 C e linn ls E A aan cva rman enamnenneean 1 BNC female Operating ee 0 50 C ee el E EE Serial digital SGMPTE259M SITIO CONC A A A E A gealuaaaedal 75Q Jitter lt 0 2UI Tipical 0 1UI Color Bar 10Hz filter mode DEE 800mV 10 AES3 1100 or 752 INPUT GV Tun le 1 SACOM CONG ee E XLR or BNC Lu et e ne EE 110 or 759 SAMAK NOV KE 7V p p MPI UE 0 2V p p NOTE AES and SPDIF are not used at the same time BLOCK DIAGRAM REFERENCE INPUT Analog BB 300 my 1 BNC se hues Leo SDI OUT BB REF IN
22. r replacement of products if declared characteristics of the product are changed 2 Ifthe goods are not delivered as specified with the contract the consumer has the right to request from the manufacturer service provider to eliminate the lack of conformity without charge repair or replacement or to request an appropriate price reduction or terminate the contract 3 Any repair or replacement must be made within a reasonable time without significant inconvenience to the consumer taking into account the nature and the purpose for which the consumer has purchased the product 4 The consumer has the right to terminate the contract if he can realize the right to repair or replacement or if the manufacturer servicer has not completed repair or replacement within a reasonable time or if the manufacturer servicer did not perform repair or replacement without significant inconvenience to the consumer 5 The consumer may not terminate the contract if the lack of conformity of the product is negligible 6 The product will function properly when used in accordance with the user manual 7 Period of servicing the product is 6 years from the launch on the market The product purchased outside the territory of Serbia does not fall under the terms of this warranty only to 1 year factory warranty from date of purchase TERMS OF WARRANTY 1 The warranty period begins on the date of sale referred in the invoice 2 The buyer loses the right to
23. resence is required Fix the back connector with M2 5 screw Be sure to install a protective pad before installing the back connectors DVD Sams elektronik doo e Sams sams rs e www sams rs 13 Glen Em bedders elektronik Place the back connector Fix the back connector with M2 5 screw SRU REAR SIDE Rear side view 1 Mass 2 Power switch 3 The socket 4 Connections for back connectors DANGER DO NOT INSERT SHARP METAL OBJECTS OR FINGERS INTO THE SPACE BEHIND THE POWER PANEL HIGH VOLTAGE 444 THE SIGN LIGHTNING IN A TRIANGLE IS TO ALERT THE USER TO THE PRESENCE OF LIFE THREATENING HIGH POWER LABEL IS PLACED NEXT TO POWER PANEL 14 Sams elektronik doo e sams sams rs e www sams rs DVD Glen elektronik Embedders PCB WITH THE LAYOUT OF ELEMENTS SUE SsJ SWDS MMM 41U04 43 9 SWDS 600Z 9 J p qw4 3 JapeAUOD OIpny oepiA NOTE For inputs with 1109 jumpers set to J11 and JP2 option is only available on the modules qj N o00000000 0 Lava N S Ve w odg CG D CV57e E R cero e cv560 ND000000 CV47 D 0000 eCV16 oCV38 ECV39 eCV49 eCV19 eCV41 eCV42 eCV43 eCV55 R 0000 EH ES On gt J eCV58 e 5 eCV440 eCV45 PTT o 000 ONT CV32 CV33e CV340 CV170 cv350 CV36 CV370 CV180 D OR450 OR420 R48 1 T For 75Q jump
24. set the device press the MENU BACK button Select the menu by pressing the UP DOWN keys On the selected menu press OK OK SAVE UP MENU BACK DOWN Te Entering the menu for setting the device 18 Sams elektronik doo e Sams sams rs e www sams rs DVD Glen elektronik E m bedders MENU TREE The bold options are the factory default settings STATUS OO ree ges a en tig Pai Ki Bel fan er oe 1 H Sol bi Km AU Blank mi BERNE I ii WIER W Ke EI KILL ALL CL wi b E 2 EECH HORISONTAL POSITION 0 000ps 63 963us leet Pac VERTICAL POSITION 1 lines 5 lines a 4 FETE ERROR MODE PASS ALL Ref FO Bape FRAME FIELD 1 FIELD 2 BLACK 75 COLOR BAR KILL OUT required 5 EXT REF a BB ANALOG hardware option presence SDI reserved for future use do not use INPUT 2 6 CHANNEL 1 SOURCE INPUT 1 SS 3 7 INPUT 4 CHANNEL 1 LEVEL 6 00 cB 0 00 dB 6 00 dB 8 CHANNEL 1 POLARITY _ MORTAL INVERT 9 CHANNEL 2 SOURCE SC 1 INPUT 2 INPUT 3 10 INPUT 4 CHANNEL 2 LEVEL 6 00 cB 0 00 dB 6 00 dB 11 CHANNEL 2 POLARITY NORMAL INVERT E CHANNEL 3 SOURCE p INPUT 1 INPUT 2 3 13 INPUT 4 CHANNEL 3 LEVEL 6 00 dB 0 00 dB 6 00 dB 14 CHANNEL 3 POLARITY ARTAR INVERT Continued on next page DVD Sams elektronik doo e sams sams rs e www sams rs 19 sda mS Em bedders elektronik 15 CHANNEL 4 SOURCE INPUT
25. ssional person authorized by the manufacturer must check the device after completion of service 24 Allow a free rack unit 1RU above and below the device for ventilation or put rack fan under the device TECHNICAL SUPPORT AND SERVICE Sams elektronik has made every effort to ensure that the equipment works in perfect condition In the event that problems that occur can not be resolved or if you have any questions regarding this equipment or information about other products produced from Sams elektronik contact your local sales representative or call Sams elektronik directly through one of the ways listed below Sales 381 11 3806 254 Technical support 381 11 2402 212 Service 381 11 4056 051 Email Sales sasa sams rs Technical support and service sams sams rs Web site www sams rs Address SAMS ELEKTRONIK doo 48 Zivka Davidovica st 11050 Belgrade Serbia 4 Sams elektronik doo e Sams sams rs e www sams rs DVD Gleef elektronik Embedders TABLE OF CONTENTS Description Page UNPACKING AND INSTACLATION EE 6 RSR LC Le 6 REMOVAL AND STOR EE 6 SGP TO IN BEE 7 MODULE INSTALATION IN SRU RACK FRAMES NENNEN 11 PACK EECH 13 SRU REAR SIDE eebe 14 PCB WITH THE LAYOUT OF ELE OST RE 15 INSTALLATION gea 16 THE DEVICE FUNCTIONS E 17 ERRORS WITH CONNECTIVITY AND ECK AR 17 FACTORI RR 18 MENU ere ESEE E EAA E EE 18 MENO TREE aaa ta seteueeaeacsaie EEE E EE EEEE 19 1 HORIZONTAL VERTICAL BLANKING ANN ANERE
26. to change without notice POWER SN OROS a a E 2 x 12V AC POWETF i eege EE 5W TEMPERATURE Bertormance NN 5 40 C BI Ke LL MN 0 50 C BACK CONNECTOR BCVA 84 WARNING NEVER CONNECT E AES AND SPDIF CABLES E ATTHE SAMETIME SPDIFIN Ee gt O AUDIO EDH EMBEDDER TRS PIXEL CLOCK GENLOCK WORD CLOCK AES RECEIVER BB REF IN SYNC PROC AES3 1 Sams elektronik doo e Sams sams rs e www sams rs sadaf mS Embedders elektronik DVD 12efs 1 SDI Frame sync and ich AES EBU embedder Broadcast quality Synchronize digital video and embeding digital audio EDH processing Input signal presence detection Pass Freezing or broadcast test in the case of incorrect video input Easy setup with local control and LCD display Audio embedder Balanced unbalanced digital audio inputs 24bit 48kHz 1 ch sampling and processing DVD 12efs 1 have a frame synchronizer that asynchronous video signal recorded in the memory and reads it synchronized with an external reference as well as other settings It is useful for sychronizing large number of external signals with signals from the TV station or the capture of material from an amateur into a professional format DVD 12efs 1 is synchronous switch tolerant RP 168 for a smooth transfer without unpleasant visual effects when switching between two sources DVD 12efs 1 is high qua
27. warranty if the defect cause failure from not following the user manual instructions improper installation comes to mechanical damage during use repairs and modifications by unauthorized persons installation of non genuine spare parts and if the buyer does not comply with all warnings listed in the user manual 3 The warranty is voided if the device is damaged during the disturbances from the environment natural disasters floods hail etc suffered an electric shock or lightning strike IMPORTANT NOTES 1 Be sure to thoroughly read the user manual If you have any doubts about the instructions contact the technical support of the manufacturer 2 Before contacting for technical help please make sure that are provided with all necessary conditions for normal operation 3 If the malfunction or defect in the device does not eliminate within a reasonable time from the date of failure the warranty period shall be extended for as many days as the unit is in service 4 For all maintenance interventions shall solely be authorized services listed in this Warranty Certificate 2 Sams elektronik doo e Sams sams rs e www sams rs DVD sda mS elektronik Embedders SAFETY WARNINGS FOR SRU RACK FRAME UPOZORENJE IMPORTANT SAFEY BS A WARNING DOK eao NAPONOM eg CAUTION r TO AVOID RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THE UNIT TO MOISTURE OR RAIN EEE DON AOE HAZARD The symbol lightning in a triangle is to alert the us
28. ww sams rs DVD z A Embedders elektronik 3 VERTICAL POSITION This menu is used to adjust the vertical phase of the output video signal The vertical delay is adjusted in increments of one video line from 0 up to the 624 The factory setting is 0 lines Select an option by pressing the UP DOWN keys OK SAVE UP o Se MENU BACK DOWN RE E a Menu Vertical position Once you have selected the option press the MENU BACK button Option is temporarily saved 4 ERROR MODE This menu is used to set how the product behaves during a fault in the signal Select an option PASS ALL device pass signal no matter how bad signal is FRAME the device will freeze the last good picture due to poor incoming video signal FIELD 1 the device will freeze in the first field due to poor incoming video signal FIELD 2 the device will freeze the second field due to poor incoming video signal BLACK the unit will generate a black image due to poor incoming video signal 75 COLOR BAR the unit will generate a color bar due to poor incoming video signal KILL OUT device will cancel the signal at the output due to poor incoming video signal The factory setting is FIELD 1 Select an option by pressing the UP DOWN keys OK SAVE UP CORSE MENU BACK o DOWN ESES Menu Error mode Once you have selected the option press the MENU BACK button Option is temporarily saved 5 EXTERN
Download Pdf Manuals
Related Search