GasViewer Laser Methane linked Software for Android Devices
Contents
1. To return to the map display push the Standard button in the air photograph display EE 29 5 Method of Operation By flicking the map you can change the enlargement factor display range and display location gt L N X Me aati a TS R You can use the Enlarge Reduce button on the bottom of the screen to change the enlargement factor gt Alignment ry Eo display location D w A 30 5 Method of Operation e If you tap the Graph button in the upper right of the map screen the graphic display screen opens To return to the file display screen use the return button on the Android device BALA LN ELN os Tap the file 31 5 Method of Operation Storing of map By pushing the Save button at the bottom right of the map you can save the map being displayed in JPEG file format 1 After arranging the display range and enlargement factor by flicking or button operation tap the Save button at the bottom right of the map You can also save the air photo image 2 The confirmation dialog box opens Tap the Save button When you tap Discard the JPEG file is not saved 3 JPEG files are saved in the same folder as the measured data file folder The file name of the JPEG file is data file name_map serial number jpeg Serial numbers are from 00 to 99 and the 101st saved file is saved as 00 therefore t2. in Storage Unit of measurement Map mode Connection of LMm G and application GPS receiving sensitivity Light receiving intensity bar Map near the current location Current location Google Maps _ Measured value Start button to store measured value_ g Unit of measurement 7 ppm m ppm AS Attention If the Android device is not connected to the Internet map mode is not displayed If the GPS setting is OFF the current location is not displayed 13 4 Items of Display Connection of LMm G and application This means that the connection between the LMm G and the application is established When the Android device is receiving data the icon on the left as shown below is displayed Data receive is going on Data receive is suspended Setting value of alarm level This is the setting value for methane column density which triggers the alarm For instructions on how to set the value refer to 4 Settings of 5 3 Menu Button Maximum of consecutive measurement Th i red val mon nsecutive measurements is e maximum measured value among co Maximum indicated This is the maximum value measured until the LMm G stops 3600 ppm m measuring 14 4 Items of Display GPS reception sensitivity When the Android device is receiving location information the GPS reception sensitivity is indicated If the Android device is receiving location information from a satellite re
3. 1 Long tap tap somewhat long the folder or data file to be deleted 2 When the operation screen as shown on the right opens tap the Delete button To close the operation screen use the return button on the Android device 3 When the confirmation dialog box opens tap OK to delete If you tap Cancel the file or folder is not deleted Ifa folder contains only one data file and you delete this data file the folder is also deleted 35 5 Method of Operation Change of data folder name and file name You can change the name of data folder or file saved with default name measurement day time 1 Long tap tap somewhat long the data folder or file to be changed When the screen as shown on the right opens tap the Rename buiton 7h i it To close the operation screen use the return button on the Android device Input the file name and tap the OK button The following characters cannot be used as a character of a filename double byte character lt gt Ifyou tap Cancel the file name is not changed 36 5 Method of Operation Copy of photo data into a data folder You can copy photo data into an existing data folder 1 37 On condition that the contents of a folder are displayed if you open the Menu screen Camera changes to Picture To close the Menu screen use the return button on the Android device Tap the Picture button
4. G with Android device and adjust the settings 22 5 Method of Operation 2 Camera You can take photos using the camera application installed on the Android device You can control the photos effectively by keeping the photos in the same folder as that of the measured data file on the Android device For instructions on how to copy the photos into the folder of this app refer to 3 List 1 Display the Menu screen by pushing the menu button of the Android device The Menu screen closes when you push the return button on the Android device 2 Tap the Camera button 3 The list of camera applications installed on the Android device is displayed 4 Tap and start the camera application to use 5 When the confirmation screen asking whether the photo is to be saved or discarded opens select by tapping 23 5 Method of Operation 6 To return to the screen of this app from the state of camera application running push the return button on the Android device AS Attention The photos are saved in the folder specified by the camera application not in the folder of this app A Attention Depending on the settings of the Android device or application the camera application may not appear in the list In this case refer to the instruction manual of your Android device or camera application AS Attention The appearance of the list of camera application or the design layout and display items of
5. Gas Viewer To start communicating with an LMm G pairing connecting the LMm G with the Android device is necessary Before pairing confirm that the Bluetooth setting for the LMm G is enabled In order to change the Bluetooth setting refer to 5 3 Change of settings in the LMm G instruction manual 1 After the start up of this app the title screen opens and then the screen for pairing with the LMm G opens as shown on the right 2 Tap Setting in the dialog box If you tap Cancel the dialog box closes and the process of pairing stops To display this dialog box again for pairing refer to 1 Connect of 5 3 Menu Button 3 The Bluetooth setting screen of the Android device opens 4 Set the Bluetooth setting to ON This setting screen opens even if the Bluetooth setting is already set to ON 3 Start up of GasViewer 5 After the Bluetooth setting is enabled ON when searching for devices LMm G is indicated as Available device among other devices If the Bluetooth setting is disabled OFF LMm G is not displayed If LMm G is already paired with an Android device LMm G is indicated as Paired device To communicate again with a paired LMm G a new pairing is not necessary Proceed to step 9 of this manual If you want to communicate with an LMm G that is not paired you must cancel the paired status In this case cancel the existing pairing according to 3 5 Cancel Pa
6. be at the customers expense Article 4 Compliance with regulations From the standpoint of nonproliferation of weapons of mass destruction including nuclear biochemical and conventional weapons and the nonproliferation of related materials and equipment including manufacturing facilities Customers shall not export this software and furthermore shall prevent the export of this software directly or indirectly to a destination person or company in violation of the Foreign Exchange and Foreign Trade Act of Japan the US Export Administration Act and other related laws regulations or standards of Japan and other countries iii Article 7 Obligations after termination Article 5 Termination Upon termination of this license under Article 5 customers shall stop using this software immediately and shall return or discard this software and all copies to Tokyo Gas Engineering Co Ltd on demand from Tokyo Gas Engineering Co Ltd Tokyo Gas Engineering Co Ltd shall have the right to terminate the grant of this license if Customers breach any of the articles of this license agreement violate the copyright or other rights of Tokyo Gas Engineering Co Ltd or in the event of reasonable grounds to terminate the grant of this license due to an illegal act Article 8 Negotiations Any issues regarding the interpretation of this license or any matters not specified herein shall be resolved in good faith after discu
7. file names You can change the file name For details refer to Change of the data folder name and file name The maximum volume of measurement data stored in one data file is 6 000 lines If you conduct measurement for a long time and the volume of data exceeds 6 000 lines the new file is created automatically in the same folder In this case the newly created file name is yvy_mm_dd hhmmss _ serial number To return to the previous page of the folder list screen push the return button on the Android device 26 5 Method of Operation Graphic Display Tap the stored data file to display the graph The horizontal axis is for time the vertical axis is for measured density The unit of measurement for storage is indicated along the vertical axis For the method of changing the unit of measurement refer to 4 Settings in this section The graph is color coded according to the state of measured values Measured values less than the alarm level light blue Measured values greater than or equal to the alarm level red Measured values with an error yellow For details on the errors refer to 6 Error Messages Flick the graph to move the graph along the time axis PE VU eps VL TL ops EULA TR ope maram n ae To return to the data file screen push the return button on the Android device 2 mis 2 oe PUL WAP ee min naun 5 Method of Operation Map Display When
8. screen for stop is displayed as shown on the right 6 If you tap Yes in the dialog box the storing process ends If you tap No in the dialog box the storing process continues 7 If you tap Yes in step 6 the confirmation screen opens to ask whether the file is to be saved or discarded If you tap Save measured data is stored as a CSV file If you tap Discard measured data is discarded without storing 8 After the confirmation screen for file save the measurement screen activates again 20 5 Method of Operation By pushing the menu button of the Android device you can display the Menu screen on the bottom of the screen In this section each function is explained AS Attention The icon for the menu screen differs depending on the version of Android 21 5 Method of Operation 1 Connect When the LMm G is disconnected from the application you can display the connection setting screen by tapping the Connect button 1 On the condition that the LMm G is disconnected from the application display the Menu screen by pushing the menu button of the Android device The Menu screen closes when you push the return button on the Android device 2 Tap the Connect button If the LMm G is connected to the application you cannot tap the Connect button 3 The setting dialog box for pairing between the LMm G and the Android device is displayed as shown on the right Refer to 3 2 Pairing LMm
9. the _ at alarm level To do this setting tap Vibrate and place a checkmark A attention When an Android device has no vibration function even if you select Vibrate it does not vibrate 40 5 Method of Operation Alarm level You can set the methane column density that triggers an alarm 1 Tap the Alarm level button 2 When the alarm value screen as shown on the right opens input the value and push the OK button You can input the value directly or use the button In the case of direct input the setting interval is 1 The button increases the value by 10 the button decreases the value by 10 Ifyou tap Cancel the value is not set To close the setting screen use the return button on the Android device AS Attention Without saving the value by tapping OK if you close the screen using the return button on the Android device or the Cancel button the input value is not set 41 5 Method of Operation Settings for data storage interval and averaging You can set the data storage interval and the presence absence of averaging 1 Tap the Storage button 2 The screen as shown on the right opens To close the setting screen use the return button on the Android device The interval for data storage you can setis 0 1 seconds 0 5 seconds in the case of 0 5 to 60 sec and 1 minute in the case of 1 to 60 minutes After changing the s
10. the confirmation screen for photo storing may differ depending on the version of Android or model of the device 24 5 Method of Operation 3 List You can display the stored measurement data graphically Additionally if the data was stored with the location information obtained by the GPS setting ON the measurement value greater than the alarm level location and time can be displayed on Google Maps Display of the stored measurement data files The list of stored measurement data files is displayed by the following steps 1 Display the Menu screen by pushing the menu button on the Android device 2 The Menu screen closes when you push the return button on the Android device Micon 637 ppn Rabe au rereenil 2 Tap the List button 3 The list of folders containing saved measurement data files is displayed The initial folder name is the starting date of storing yy_mm_dd hhmmss The update date and time are also shown at the bottom right of the folder names You can change the folder name For details refer to Change of the data folder name and file name To return to the numeric mode screen push the return button on the Android device 25 4 Tap the folder to display the stored measurement data file 5 Method of Operation The initial data file name is the starting date of storing yy_mm_dd hhmmss csv The update date and time are also shown at the bottom right of the
11. the case when High density gas is displayed This message is displayed when an LMm G detects a higher density of methane than the detectable range Refer to the instruction manual for the LMm G and adjust the LMm G to the appropriate measurement status 6 Error Messages In the case when Too much reflection is displayed This message is displayed when strong light such as sunlight falls on the light receiving section of an LMm G Refer to the instruction manual for the LMm G and adjust the LMm G to the appropriate measurement status kipami ST Bem Bi iiu ee fone START In the case when The Bluetooth was disconnected is displayed This message is displayed when the LMm G is turned off the Bluetooth setting is OFF while connecting or communication between them is cut off because the distance between them is greater than the communication range Tap the OK button and establish a connection again refer to 3 2 Pairing LMm G with Android device and 3 3 Connection of LMm G and Application When this error is displayed while data is being stored data up to the time the message is displayed can be stored Refer to 5 2 Storing of Measured Data and store the data 52 6 Error Messages In the case when The Measurement was Stopped is displayed This message is displayed if the LMm G stopped measuring while data is being stored Data up to the time the message is disp
12. the measured data is stored with location information using the GPS setting ON the measured data location and time can be displayed on Google Maps by tapping the Route Map button in the top right of the graph display screen When data is stored if the GPS setting is OFF or the measurement location is underground in a tunnel or location information cannot be obtained because of the Android device status the Route Map button cannot be tapped l Map Display Map Display Available Unavailable AS Attention If you save measurement data without connecting the Android device to the Internet it may take a long time to obtain location information even if GPS reception sensitivity bar is indicated depending on the Android device model measurement location time and weather conditions 28 5 Method of Operation On Google Maps only measured values greater than the alarm level are mamma gt indicated by a red sphere By tapping a red sphere you can view the measurement time and measured value at the location Measured values less than the alarm level are indicated by a light blue line Ifyou tap the light blue portion the measured value is not displayed Map changes the red sphere tapped is centered To erase the balloon indicating the measured value tap the balloon When you tap the Satellite button at the bottom right of the map screen the map changes to the air map representation
13. value for the alarm level is displayed Storage cycle The setting value for the storage cycle is displayed Average The setting for the average is displayed ON OFF Unit The setting value for the unit is displayed ppm ppm m Distance If the unit is ppm the setting distance is displayed If the unit is ppm m CG GG is displayed Measured data output NO Line number yyy mm dd hh mm ss s The time the Android device received the measured value Intensity Light reception intensity Measured Value Measured value Error The status of the measured value 1 Values are measured normally 5 Not enough reflection Value involving an error 6 High density gas Value involving an error 7 Too much reflection Value involving an error For details on these errors refer to 6 Error Messages Location Location information If the location information is not obtained No data is displayed The measured value is stored at the interval specified in Storage If Storage is specified as 0 1 seconds the location information is output in intervals of 0 5 seconds 50 6 Error Messages 6 Error Messages 51 In the case when Not enough reflection is displayed This message is displayed when the light reception intensity of an LMm G is insufficient Refer to the instruction manual for the LMm G and adjust the LMm G to the appropriate measurement status In
14. The thumbnails of the pictures saved on the Android device are displayed Check the photos to copy to the folder and tap the Copy button When the confirmation screen as shown on the right opens tap the Copy button f you tap Cancel the photo data is not copied The source photo data is not deleted 5 Method of Operation 6 You can confirm that the photo data is copied into the folder as Picture If you tap enue the picture file you can view the photo You can change the file name of the picture file send the picture as e mail or delete the picture file using the same procedure as that of measured data file AS Attention When the contents of a folder are displayed you cannot use the camera function 38 5 Method of Operation 4 Settings You can change the various settings such as the data storage interval 1 Display the Menu screen by pushing the Menu button on the Android device The Menu screen closes when you push the return button on the Android device 2 Tap the Settings button 3 The setting screen as shown on the right opens To return to the previous screen use the return button on the Android device AS Attention While the measured data is being stored you cannot tap the Settings button 39 Maximum 637 ppm 555 ppitem ALLENT 5 Method of Operation Vibration function You can vibrate the Android device when the measured value exceeds
15. ap mode by flicking the screen in numeric mode To return to numeric mode from map mode push the return button of the Android device Return button AS Attention The measured data displayed on this app is not stored automatically To store measured data tap the Storage START button on the bottom of the screen For details refer to 5 2 Storing of Measured Data 18 5 Method of Operation By tapping the Storage START on the bottom of the screen you can store the measured data transmitted from the LMm G on the Android device 1 When measurement of the LMm G is suspended the display of Storage START is translucent as shown on the right In this case even if you tap the SITAR button storing of measured data does not start 2 When the measurement of the LMm G starts Storage START is displayed as Storage shown on the right and you can begin storing START 3 When you tap the Storage START button storing of measured data starts 4 While the measured data is being stored the Storage START button changes to the Storage STOP button as shown on the right STOP By changing the settings for Storage cycle or Average as described below you can set the interval for measured data storing or presence absence of averaging For details refer to 4 Setting of 5 3 Menu Button 19 5 Method of Operation 5 While data is being stored if you tap the Storage STOP button the confirmation
16. ception intensity is indicated in three levels beside the GPS symbol If the Android device is receiving from a network such as Wi Fi only the GPS symbol is displayed and the reception intensity is not indicated Location information from a satellite Location information from a network AS Attention If you save measurement data without connecting the Android device to the Internet it may take a long time to obtain location information even if the GPS reception sensitivity bar is indicated depending on the Android device model measurement location time or weather conditions Light reception intensity bar The amount of light the LMm G is receiving during measurement is indicated Be sure to measure when the reception intensity is indicated in green If the reception intensity is not indicated in the bar the amount of light may be insufficient In this case refer to the manual for the LMm G and adjust the measurement distance or reflection object for an accurate measurement 15 4 Items of Display Indicator of current measurement data The ratio of the measured value to the alarm level is indicated by a meter When the measured value is lower than the alarm level the measured value is displayed in light blue and when the measured value greater than or equal to the alarm level the display is red bcs J Alarm level threshold Measured value is Measured value is lower than alarm greater than or level equal t
17. d device to the Internet it may take a long time to obtain location information even if the GPS setting is enabled depending on the Android device model measurement location time or weather conditions 3 Start up of GasViewer If you have paired your Android device with another LMm G that LMm G is indicated as Paired device in step 5 of 3 2 Pairing LMm G with Android device If you want to communicate with another LMm G different from the already paired LMm G cancel the current pairing status using the following steps 1 Confirm that LMm G is indicated as Paired device 2 Tap the setting and display the screen for canceling the pair 3 Tap Unpair to cancel the pairing 4 To pair with anew LMm G refer to step 5 and later of 3 2 Pairing LMm G with Android device AS Attention The method of canceling pairing and the design layout and display items on the screen may differ depending on the version of Android or model of the device Refer to the instruction manual of your Android device 12 4 Items of Display 4 Items of Display Numeric mode Connection of LMm G and application ie i r N GPS receiving sensitivity Eo Light receiving intensity bar Setting value of alarm level Maximum Indicator of current measurement data Maximum of consecutive measurement 3600 pom m Measurement 1 2 T Measured value ppm Start button to store measured value Paini
18. ecene ben seueer 10 JO 1a o Md sara gle sne Beane gee E a a PDO er E a 12 4 MEMS OW DIS DIAY sr A 13 5 Method Of Operat ren a aE aaa 18 S1 Display Or Measured Valg srisnean a dead pestivecataie sl ataweadieeasdseeeeseaec ee 18 9 2 Sloning Of Measured Dala meriin ea aae Misdeeciaiseie 19 Bo MENU BUON berriri E a iaa 21 5 4 Data transfer via USB cable cccccccccsssesseeccceececeeeseseeeceeeeceeseeeeeseeeeeeeseeaaaseeeeeeees 48 5 5 Stored Data Formal raien edi a aa a aa aaa ar E 49 Error Messages siae e e a aee a 51 6 1 Error Messages and Coping Strategy cccccecceceeceeeeeeeeeeeeeseessausaaaaaaeeaeseseeeeeess 51 Tz TROUDICSHOOUIIIG iiaia aa hore ites eee 54 7 1 Symptoms and Coping strategy csscssesssssssesseeeeeceecceceeeeeeeeeeseseeseausauaesaeeseseeseeseess 54 8 Distribution Source and INQUILY cccccceeeessesseesseeeseeeeeeeeeeeeeeenenenseeeeenees 56 8 1 Distribution Source and Service Center ccccccecceccccucceccecueceuceccuceeceuccecausaeeaeeaeeeees 56 1 Overview 1 Overview When you install the application GasViewer from now on referred to as this app on a smartphone or tablet computer in which the Android OS operating system is installed from now on referred to as Android device you can transfer the data measured by the Laser methane mini G from now on referred to as LMm G to an Android device LMm G and this app communicate with Bluetoot
19. ee E GasViewer Laser Methane OG linked Software for Android Devices Instruction Manual Please be sure to read this manual before using this software Keep this manual with this software Tokyo Gas Engineering Co Ltd GasViewer Laser Methane GIG linked Software for Android Devices Instruction Manual 2013 1 25 First edition The contents of this manual are subject to change without notice This manual or any part of this manual may not be reprinted or reproduced without permission Copyright 2013 Tokyo Gas Engineering Co Ltd Printed in Japan Grant of Software License Please be sure to read the software license hereinafter referred to as this license before you use execute copy record etc hereinafter referred to as use the software program database etc hereinafter referred to as this software Only if you agree to this license are you then authorized to use this software to the extent provided in this license and on the device hereinafter referred to as this device specified by Tokyo Gas Engineering Co Ltd Article 1 Permission and Prohibition 1 Customers are prohibited from selling disclosing removing transferring renting or distributing this software to a third party regardless of whether or not compensation is received Customers are also prohibited from reproducing disclosing or granting a license for the purpose of reusing the software Rev
20. erse engineering disassembling or reverse compiling this software is prohibited Article 2 Disclaimer Tokyo Gas Engineering Co Ltd shall not be responsible for any damage arising out of the use or inability to use this software by customers including damage caused by a third party to customers Article 3 Repair 1 Even though customer use is based on the instruction manual if this software does not work as described in the instruction manual hereinafter referred to as failure Tokyo Gas Engineering Co Lid shall at its sole discretion repair or replace the software or indicate how to avoid a failure without charge However failures relating to the following cases are excluded a Use for a purpose not described in the instruction manual b Mutual interference with software other than as specified by Tokyo Gas Engineering Co Ltd c Recovery of deleted data or damaged data d When this device is repaired or altered without the agreement of Tokyo Gas Engineering Co Ltd e In the event of a factor or fault not attributable to Tokyo Gas Engineering Co Ltd for example influence exerted by another device virus disaster or other external factor In the case of a failure as prescribed in the preceding paragraph transport fees to the place indicated by customers for the work of Tokyo Gas Engineering Co Ltd and the cost of fieldwork consisting of accommodation fees and daily pay shall
21. etting push the OK button to save the change 0 1 second 0 5 60 seconds 1 60 minutes selected selected selected The value can be set by direct input or with the buttons If you tap Cancel the value is not set 42 5 Method of Operation If you select Average when the data is stored the 0 1 second data is averaged according to the interval setting value AS Attention Without saving the value by tapping OK if you close the screen using the return button on the Android device or the Cancel button the input value is not set AS Attention This function is for stored data and the measured data displayed on the screen is not affected 43 5 Method of Operation Unit of measurement You can change the unit of measurement i Tap the Unit button The setting screen as shown on the right opens se To close the setting screen use the return button on the Android device You can select the unit of measurement from ppm m or ppm After making the change tap the OK button to save the change Linit E ppm pom 999 toon be SOC l ppm m selected ppm selected If you select ppm input the measurement distance The methane column density corresponding to the input distance is displayed and saved To input the value input directly or use the buttons 44 5 Method of Operation AS Attention Without savi
22. h within a distance of about 10 m This app can save measurement data and display graphs This app can also display measurement data location and time on Google Maps using the GPS global positioning KS system function of Android devices Measurement data zay A thi a arn wi Ue gt gal F ut wi 3 yA 1At Ke wil mi wi as pe _ Location information ia Ld 2 i E Communication with Bluetooth Range about 10m WET Batch transmission of measurement data mail USB Ay Attention The distance of communication between LMm G and an Android device increases or decreases depending on the usage environment AN Attention For information about the Android device with the function to communicate with LMm G contact our sales agency or consultation service listed at the end of the manual before installing 2 Installation of Gas Viewer 2 Installation of GasViewer An example of installing this app on an Android device is shown below For details contact our sales agency or consultation service listed at the end of the manual 1 Connect your Android device to the Internet and open the download page below http www netdecheck com emerging_technologies laser_methane_mini g page1 htm You can access the download page from Net de Check http www netdecheck com the Web site operated by Tokyo Gas Engineering Co Ltd If you use an Android device that cannot connect t
23. he existing file is overwritten 32 5 Method of Operation Mailing of data folder and file You can attach the saved data file to an e mail and send it to a PC You can send a single data file or all files in a folder at the same time 1 Long tap tap somewhat long the folder or data file to be attached to an e mail 2 When the operation screen as shown on the right opens tap the Mail button To close the operation screen use the return button on the Android device 3 The list of mail applications installed on the Android device is displayed 4 Tap the mail application to use then the data is attached to the new mail and the mail creation screen opens 5 Input the address and message and send the e mail 33 5 Method of Operation AS Attention The mail application installed may not appear in the list depending on the setting of the Android device or application In this case refer to the instruction manual of your Android device or application AS Attention If an Android device is not connected to the Internet you cannot send an e mal AS Attention The design layout and display items of the list display screen for the mail application differ depending on the version of Android or model of the device 34 5 Method of Operation Deletion of data folder and file You can delete the saved data file You can delete a single data file or all data files in the folder at the same time
24. he method of changing the setting for the LMm G refer to 5 3 Change of settings of this manual 3 Start up of GasViewer After pairing the LMm G and Android device the next step is to connect the LMm G and this app 1 When pairing of the LMm G and Android device is complete the screen as shown on the right opens 2 Confirm the display of the paired LMm G and then tap LMm G 3 The connection between the LMm G and this app starts Connecting now Pleas wait j e 3 Start up of Gas Viewer 4 Ifthe connection is successful the screen as shown on the right opens The connection between the LMm G and this app may fail because of the radio wave conditions of Bluetooth or usage environment In that case the screen as shown on the right opens If you tap Retry the connection process starts again Each time you tap Retry the connection process starts If you cannot establish a connection after many retries refer to 7 Troubleshooting Now the connection between the LMm G and this app has been established Next adjust the GPS setting according to 3 4 GPS Settings AS Attention Only one LMm G can be connected to this app multiple LMm Gs cannot be connected simultaneously 3 Start up of GasViewer This app can display measurement data location and time on Google Maps by retrieving location information from the GPS To do so set the GPS function to enabled ON according to the follow
25. ing steps If the GPS function is already set to enabled ON on the Android device the setting screen does not open 1 If the GPS function has been set to disabled OFF when the connection between the Android device and LMm G is established the GPS setting screen as shown on the right opens 2 If you tap Setting the GPS setting screen of the Android device opens If you tap Cancel you can start communication with the LMm G leaving the GPS function disabled OFF In this case location information is not obtained Even if you tapped Cancel by setting the GPS function to enabled ON later on the Android device setting you can obtain location information 3 GPS setting screen opens Set the function to ON This app uses location information therefore be sure to select Google s location service and GPS satellites if you do not select those choices location information cannot be obtained 10 3 Start up of Gas Viewer 4 After the GPS setting is complete push the return button on the Android device 5 The screen as shown on the right opens 6 The waiting screen as shown on the right opens ppitkm AS Attention The design layout and display of the GPS setting screen may differ depending on the version of Android or model of the device Refer to the instruction manual of your Android device AS Attention If you save measurement data without connecting the Androi
26. iring of this manual The pairing is not canceled even if an Android device or LMm G is turned off 6 When you tap LMm G indicated at Available device the pairing between the LMm G and the Android device starts 7 During the pairing process a dialog box confirming the passkey is displayed Tap the Pair button The passkey is not displayed on the LMm G s display but this is not a failure 3 Start up of Gas Viewer 8 The LMm G and the Android device are paired and the LMm G is indicated as Paired device The pairing is not canceled even if the Android device or the LMm G is turned off 9 Confirm that the pairing with the LMm G is established and click the return button on the Android device 10 The screen returns to this app as shown on the right Now the LMm G has been paired with the Android device Next according to 3 3 Connection of LMm G and Application connect the LMm G and this app AS Attention The design layout and display of items on the screen are different depending on the version of Android or model of the device Refer to the instruction manual of your Android device AN Attention When multiple LMm Gs with the Bluetooth setting ON exist around the Android device multiple LMm Gs are detected as Available device An individual LMm G cannot be identified on an Android device Only the Bluetooth setting for the LMm G you want to pair must be enabled For t
27. layed can be stored Tap OK then the confirmation screen opens to ask whether the file is to be saved or discarded From this screen you can save data refer to 5 2 Storing of Measured Data 53 T 7 Troubleshooting Troubleshooting The sound for a measurement or an alarm is not produced Is the setting for volume on the Android device OFF Refer to the instruction manual for the Android device and adjust the volume Connecting failed is displayed and the LMm G and the application cannot be connected Is the Bluetooth setting of the LMm G disabled Refer to the instruction manual for the LMm G and enable the Bluetooth setting For the method of changing the Bluetooth setting for the LMm G refer to 5 3 Change of Settings of the instruction manual for the LMm G Cancel Is the LMm G displayed as Paired device on the Bluetooth setting screen identical to the one to which you are trying to connect Even if you turn off the Android device or LMm G the pairing is not canceled To pair with another LMm G from the previous one you should cancel the existing pairing status 54 7 Troubleshooting Steps to cancel a pairing 55 Tap Cancel on the Connecting failed screen Push the Menu button of the Android device and tap the Connect button Cancel the pairing refer to 3 5 Cancel Pairing Despite the fact that the above two possibilities have no relation
28. ng the value by tapping OK if you close the screen using the return button on the Android device or the Cancel button the input value is not set 45 5 Method of Operation 5 Info The info opens the Web page containing useful information for measurements with the Laser Methane mini G http www netdecheck com emerging_technologies laser_methane_mini g page1 htm 1 Display the Menu screen by pushing the menu button on the Android device The Menu screen closes when you push the return button on the Android device 2 Tap the Info button 3 The Web page containing useful information opens A Attention When the Android device is not connected to the Internet you cannot view the Web page 46 5 Method of Operation 6 Quit Tapping Quit terminates the application 1 Display the Menu screen by pushing the menu button on the Android device se The Menu screen closes when you push the return button on the Android device 2 Tap the Quit button You cannot tap Quit outside the measurement screen 3 The confirmation screen as shown on the right opens 4 lf you tap Yes the application terminates If you tap No the screen returns to the measurement screen AS Attention While the measurement data is being saved you cannot terminate the application After storage is complete quit the application 47 5 Method of Operation By connecting the Android device and a PC
29. o alarm level Measured value and unit of measurement This value indicates the measured value received from the LMm G The Measurement indication is updated at an interval of 0 5 seconds You can select ppm m or 4 2 r ppm as a unit of measurement For the method of changing the unit refer to aa 4 Settings of 5 3 Menu Button Ppm m Start button to store the measured value By pushing this button you can start storing measured data If the LMm G does storage not begin measuring you cannot start storing For details refer to 5 2 Storing of START Measured Data 16 4 Items of Display Map near the current location and current location You can view Google Maps and check the current location lt You can move the display location and enlarge or reduce the map by flicking Attention If the Android device is not connected to the Internet map mode is not displayed If the GPS setting is OFF the current location is not displayed 17 5 Method of Operation 5 Method of Operation After the connection of the LMm G and this app has been established when the LMm G starts measuring measured values are transmitted to the Android device automatically and displayed The measured value is updated at an Paar interval of 0 5 seconds G00 pps Peman The time lag between the display on the LMm G and that on this app is about 1 second or less _ START You can move to the m
30. o the Internet contact our consultation service listed at the end of the manual 2 Tap the link button on the Web screen to download the application mE a Dv Gl a 3 Download starts 4 When the download is complete the completion message is displayed on the Android device ee For the method of message display refer to the instruction manual of the Android device l ALUAT 2 Installation of Gas Viewer 5 Tap the message to display the installation confirmation screen 6 Tap the Install button 7 Installation starts 8 Installation ends 9 Tap the Open to start application Tap Done to return to the home screen of the Android device A Attention The design layout and display of items on the screen are different depending on the version of Android or the model of the device For details of the download and installation of this app contact our sales agency or consultation service listed at the end of this manual 3 Start up of GasViewer 3 Start up of GasViewer 1 Tap the icon of this app installed on the Android device On some devices the icon may not be displayed on the home screen even after this app has been installed For the method of displaying the icon on the home screen refer to the instruction manual of the Android device GasVi ewer 2 This app starts and the title screen as shown on the right opens for about 3 seconds Gas Viewer Laer Lethe EES 3 Start up of
31. ssions between customers and Tokyo Gas Engineering Co Ltd Article 6 Compensation for damage If Tokyo Gas Engineering Co Ltd incurs damage as a result of a customer s breach of this license Tokyo Gas Engineering Co Ltd shall be allowed to submit a claim for compensation Article 9 Governing law This grant shall be governed and interpreted by the laws of Japan Trademark Android is a trademark or registered trademark of Google Inc Google and Google Maps are trademarks or registered trademarks of Google Inc Bluetooth word mark and logo are trademarks of Bluetooth SIG Inc that Tokyo Gas Engineering Co Ltd uses under a license Microsoft Excel is a trademark or registered trademark of Microsoft Corporation in the United States and other countries Table of Contents T OVC RV CW o a a a aE a aaa 1 2 Installation of GasViewer sssssssnsnsnnnnnnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnmnnn 2 3 Start Up Of GaS VIC WOR aasian sitenescatceseetetccccociepentacceles aA ana aara AAEE EEan 4 3 1 Start up of Gas VISWEP vczcxcevn ated eaiceuscccecadedavacesidsutwianicendenceteumonecoceectweatioenaacanaoaeeaseaeeacentexd 4 3 2 Pairing LMm G with Android device ccccccceceeeseeeeeeeeeeeceeauaeeseeeeeeeeessaaaeseseeeeeeeeeaaas 5 3 3 Connection of LMm G and Application ccccccccccccceeceseesseeeeeseeeeesseeeeeeeeseeeeeeeeeeeeeees 8 AG CIN S Satan reins ote Scene tee cnn astne ced T ee Cen eae ed ata
32. to your problem if you cannot establish a connection cancel the pairing of the LMm G and try to pair again Numeric mode screen does not open gt The LMm G and the application are not connected Open the Menu screen tap Connect and establish the connection between the LMm G and the application For details refer to 1 Connect of 5 3 Menu Button 8 Distribution Source and Inquiry 8 Distribution Source and Inquiry If you have any questions about this app or you wish to have a consultation please contact our service center below Tokyo Gas Engineering Co Ltd Equipment Sales Dept 4F Nissay Aroma Square 5 37 1 Kamata Ota ku Tokyo 144 8721 Japan TEL 03 5480 6819 FAX 03 5480 6851 URL http www tge co jp 56
33. with a USB cable you can copy and move the measured data file saved on the Android device to a PC directly For the method of connecting the Android device and a PC and the method of transfer refer to the instruction manual for your Android device The data destination on an Android device sdcard Android data Gas Viewer If your Android device has an internal SD card data is saved on the internal SD card Otherwise if your Android device has only an external SD card data is saved on the external SD card When the device is equipped with both SD cards data is saved on the internal SD card 48 5 Method of Operation Data files are stored on the Android device in CSV file format Data is stored with the file name yy_mm_dd hhmmss csv For details refer to 3 List of 5 3 Menu Button If you open the file transferred to a PC with viewer software such as Microsoft Excel data is displayed as follows Data files are composed of Setting values output and Measured data output Setting values output The settings for Storage are listed Alarm level Storage cycle sec Distance m Measured data output Measurement time measured value and location information etc are listed z annoa ar Taroa ae Taone a6 2013 1 10 20 5519 2013 1 10 205519 2013 1 10 20 55 19 o r 49 5 Method of Operation Setting values output Alarm level The setting
Download Pdf Manuals
Related Search