AT&T Velocity™ Mobile Hotspot User Guide
Contents
1. all AT amp T 46 12 30 PM Main Wi Fi ATT WIFI 2388 Password 29182314 Launch your browser to surf the Internet Connect Devices to Your Mobile Hotspot s Wi Fi You can connect up to 10 wireless devices such as smartphones laptops tablets digital cameras printers gaming consoles and digital picture frames to your mobile hotspot s Wi Fi network s See Set Maximum Number of Connected Devices on page 19 for instructions on setting connections for the Main Wi Fi and Guest Wi Fi networks You can connect A wireless device to your Wi Fi network by typing the WI FI password e AWPS enabled wireless device by pressing the WPS buttons on the mobile hotspot and the wireless device Note You can also connect a single device directly to the hotspot using the USB cable Connect a Wireless Device Manually To connect a wireless device to your mobile hotspot s WI FI network see Connect to the Internet on page 10 Get Started 11 Connect a WPS Enabled Wireless Device If your wireless device supports WPS you don t have to input the password manually to connect to the mobile hotspot On the Mobile hotspot Press and hold the WPS button on the mobile hotspot Select Pair with Main Wi Fi or Pair with Guest Wi Fi wll AT amp T 46 12 30 PM a 100 2 ft For devices that support WPS you can pair the device and securely connect to Wi Fi without entering your password Pair with Main Wi Fi2. repaired using unauthorized spare parts e If the serial number or mobile accessory date code has been removed erased defaced altered or are illegible in any way subject to sole judgment of ZTE LIMITED WARRANTY TO THE EXTENT PERMITTED BY APPLICABLE LAW THIS LIMITED WARRANTY IS YOUR SOLE AND EXCLUSIVE REMEDY AGAINST ZTE AND ZTE S SOLE AND EXCLUSIVE LIABILITY INRESPECT OF DEFECTSIN PRODUCT HOWEVER TRIS LIMITED WARRANTY SHALL NOT EXCLUDE NOR LIMIT ANY OF YOUR LEGAL STATUTORY RIGHTS UNDER THE APPLICABLE NATIONAL LAWS PO THE EXTENT PERMITTED BY APPLICABLE LAW ZTE DOES NOT ASSUME ANY LIABILITY FOR LOSS OF OR DAMAGE TO OR CORRUPTION OF DATA FOR ANY LOSS OF PROFIT LOSS OF USE OF PRODUCTS OR FUNCTIONALITY LOSS OF BUSINESS LOSS OF REVENUES OR LOSS OF ANTICIPATED PROFIT Warranty 59 INCREASED COSTS OR EXPENSES OR FOR ANY INDIRECT Notes OR SPECIAL OR CONSEQUENTIAL LOSS OR DAMAGE TO THE EXTENT PERMIT TED BY APPLICABLE LAW Z TES LIABILITY SHALL BE LIMITED TO THE PURCHASE VALUE OF THE PRODUCT THE ABOVE LIMITATIONS SHALL NOT APPLY TO DEATH OR PERSONAL INJURY CAUSED BY DEFECT OF PRODUCT IN MATERIAL DESIGN AND WORKMANSHIP How to Get Warranty Service To obtain warranty service please call 877 817 1759 Please have the following information available when you send the device in for repair e Avalid Proof of Purchase e Return address e Daytime phone number or fax number e Model IMEI Look for the 15 di
3. MF923 Hardware Version xx4A Network Name AT amp T Network Technology LTE APN broadband Software Firmware Version MF923V1 1 ICCID 89014103255174603739 IMEI 865135020000533 Signal Strength 66 dBm Contact AT amp T 800 331 0500 d 1 916 843 4685 AT amp T Privacy Policy Software Update Software or firmware updates for the mobile hotspot may become available periodically You will receive an alert when an update becomes available and you can check for updates manually from the mobile hotspot or from the AT amp T Wi Fi Manager home page Use Your Mobile Hotspot 39 Once an update becomes available you can load it immediately or postpone installation for up to 12 hours After 12 hours the Update installs automatically On the mobile hotspot If you read an alert indicating an update is available you can choose to update now or postpone Go to step 5 If you want to check for updates manually from the home screen tap Settings Tap AT amp T Software Update Tap check for update If an update is available the software will be downloaded and provide 2 options if it is not a critical update Tap Reboot amp install to load the update immediately or Tap Remind me later to wait for 4 hours An alert will appear after 4 hours reminding you that the update is available Note If the update is critical you will only have the option to Reboot amp install If you are updating now a mes
4. Press the WPS button on a device you want to connect to your mobile hotspot Your mobile hotspot and the wireless device will communicate and establish the connection 12 Get Started On the AT amp T Wi Fi Manager home page On your laptop or other Wi Fi device log in to the AT amp T Wi Fi Manager home page by visiting http attwifimanager or http 192 168 1 1 The default login is attadmin Click Settings on the navigation menu on the left side Click Wi Fi gt Basic tab Choose the WPS method you want to use If the device you want to connect has a WPS button Click WPS Push button and then within 2 minutes 120 seconds press the device s WPS button e Ifthe device you want to connect has a WPS PIN associated with it Enter the device s WPS PIN and click Enter WPS PIN Your mobile hotspot and the wireless device will communicate and establish the connection Get Started 13 Main Wi Fi Network Network Name SSID Security Type Password Broadcast Network Name SSID Guest Wi Fi SSID ATT WIFI 2486 WPA2 AES PSK 12345678 Password Visible Enable Disable Apply PIN Eee PBC BSE sil Guest Wi Fi Manager Switch Network Name SSID Security Type Password Broadcast Network Name SSID 14 O Enable Disable ATT WIFI 2486 GUEST WPA2 AES PSK v 12345678 Password Visible Generate random password when enabled O Enable
5. accessing the Internet Traffic is identified by port numbers Some applications are pre defined You can define additional applications by clicking the Add Custom Application button but you need to know details of the traffic used and generated by the applications you wish to define In particular you need to know the port numbers and the protocol TCP UDP used by outgoing traffic Dropped Internet traffic is blocked by default Only traffic from the selected pre defined or custom applications are allowed to access the Internet Click Apply Advanced Settings 45 Enable VPN Passthrough If you want to connect to a corporate network using VPN you first need to enable VPN connections passthrough To enable VPN passthrough On the AT amp T Wi Fi Manager home page log in as Administrator Click Settings on the navigation menu on the left side Click Advanced gt Router tab In the VPN Passthrough section select Enable beside VPN Passthrough and click Apply Configure APN Details The APN is checked to determine the type of network connection to establish Your mobile hotspot comes preconfigured with the APN Access Point Name for AT amp T To add an APN for another network On the AT amp T Wi Fi Manager home page log in as Administrator Click Settings on the navigation menu on the left side Click Network gt APN tab Click Add In the blank line enter the profile name
6. by Wi Fi enabled devices to connect to the mobile hotspot New message received Data usage for current billing period Tap the data bar to view detailed information Battery power indication WI Fi menu Number indicates currently connected devices Tap to configure basic Wi Fi settings Settings menu Tap to configure basic device settings Tap to view carrier messages Get Started 5 Status LED Indicator The LED Indicates the device s connection status LED Indicator Patterns Blink once Blinking Steady Blinking When power on Notifications New SMS Software update notification Data usage notification Battery fully charged Low battery No SIM SIM lock SIM PIN PUK enabled Searching for network No service Limited service Charging Get Started Accessories e Micro USB cable Used mainly for recharging the battery although you can also use it to tether the mobile hotspot to your computer Wall charger Used with the USB cable to recharge the battery or to power the mobile hotspot from a wall outlet N i Micro USB cable Wall charger Get Started Set Up and Connect to the Internet Install the Battery Remove the back cover Insert the battery as shown with the contacts located against the metal springs and press the battery down into the case Replace the back cover Note The battery comes partially charged and ready to go When the battery
7. mobile hotspot To set share mode From the home screen tap Settings Tap File Sharing Tap Share Mode and select the desired share mode Use Your Mobile Hotspot 25 On the AT amp T Wi Fi Manager home page Sharing microSDHC card via USB cable File Sharing File Browser Settings Settings Status 14 38GB free of 14 89GB Messag File Sharing Mode USB Only Wi Fi Only E USB Mode Settings About Log into the AT amp T Wi Fi Manager home page Select File Sharing on the navigation menu on the left side to set the sharing mode The default mode is USB Only Connect the device to PC tablet via USB cable Go to My Computer of your PC tablet to access all files on the MICroSDHC card Note You can access the microSDHC card via USB cable only in USB mode The web page for sharing content on the microSDHC card will be disabled 26 Use Your Mobile Hotspot Sharing microSDHC Card via Web Browser Select File Sharing gt Settings tab Home File Sharing a Devices File Browser Settings Data Usage 0 15 of 4 GB used Settings Status 14 38GB free of 14 89GB Messages 2 unread 2 total File Sharing Mode USB Only O Wi Fi Only amp 14 38GB free of 14 89GB Path to Share O Entire SD Card Select File Path Settings Access Type O Read Write Read Only About Select Wi Fi Only mode Set Path to Share and Access Type Click Apply to save t
8. needs recharging follow the instructions in Recharge the Battery on page 31 8 Get Started Optional Autorun Installation For USB use only Power on the mobile hotspot and connect it to your computer with the USB cable Click Run AutoRun exe from the popout menu The tips displayed in the status bar show the installation progress of the software You may see the following messages e Device Is initializing Create ShortCut e Running webGul The hotspot automatically installs a desktop shortcut to the PC and opens the AT amp T Wi Fi Manager home page in your browser Note You can also manually install by double clicking the AutoRun exe located in the CD drive under My Computer Get Started Connect to the Internet When your mobile hotspot is powered on it automatically searches for and connects to your network provider s mobile broadband network Connect your computer or other device to your network a Use your normal Wi Fi application on your computer or other wireless device to search for the available wireless network Networks Wi Fi ATT WIFI 2486 ATT WIFI 2486 GUEST Computer Smartphone b Select the Wi Fi network name displayed on the mobile hotspot screen and then click Connect Wi Fi ATT WIFI 2486 Connect automatically 10 Get Started C Input the Wi Fi network password which is located on the mobile hotspot home screen and click Next mz 100
9. or password Main Wi Fi Network Network Name SSID ATT WIFI 2486 Security Type WPA2 AES PSK Password 12345678 Password Visible Broadcast Network Name SSID O Enable Disable Click Apply Note If you changed the Wi Fi network name or password all connected devices will be disconnected and have to reconnect Use Your Mobile Hotspot 33 Change Guest Wi Fi Name and Password If you are using the Guest Wi Fi profile you can change the Guest Wi Fi name or password from the AT amp T Wi Fi Manager home page Note By default the Guest Wi Fi name is the same as the Main Wi Fi name with Guest appended On the AT amp T Wi Fi Manager home page Login as Administrator Click Settings on the navigation menu on the left side Click Wi Fi gt Basic tab Change the Guest Wi Fi network name and or password Guest Wi Fi SSID a Guest Wi Fi Manager Switch O Enable Disable Network Name SSID ATT WIFI 2486 GUEST _ Security Type WPA2 AES PSK v Password 12345678 Password Visible Generate random password when enabled Broadcast Network Name SSID O Enable Disable Click Apply 34 Use Your Mobile Hotspot Change AT amp T Wi Fi Manager Home Page Access Settings You can customize the Admin Login used to access the AT amp T WI Fi Manager home page On the AT amp T Wi Fi Manager home page Log in as Administrator Click Settings on the n
10. wireless devices to the mobile hotspot These connections are shared between the mobile hotspot s Main and Guest WI Fi networks You can customize the distribution of devices from the mobile hotspot or the AT amp T WI Fi Manager home page On the mobile hotspot From the home screen tap Wi Fi Tap Max Wi Fi Devices Tap Oo Gio adjust the maximum number of WI FI connections Use Your Mobile Hotspot 19 all AT amp T 46 12 30 PM 100 es Max Wi Fi Devices A A total of 10 Wi Fi connections are shared between Main and Guest Wi Fi networks Max Wi Fi 10 Main 5 Guest 5 ED Tap next to Main or Guest to set the number of connections you want available for each network Tap Save On the AT amp T Wi Fi Manager home page Log in as Administrator Click Home on the navigation menu on the left side In the Main and Guest Wi Fi Max Devices section click the drop down menu to adjust the maximum number of Wi Fi connections Select next to Main Wi Fi or Guest WI Fi to set the number of connections you want available for each network e Main and Guest Wi Fi Max Devices A total of 10 devices can connect split across Main and Guest Wi Fi Max Wi Fi 10 v v me EN a Wi Fi i Click Apply 20 Use Your Mobile Hotspot Block Unblock Devices Note Whenever you block or unblock devices the Wi Fi radio resets to activate the new settings Any devices connected to
11. 2 Regulatory and Safety Information Using Your Device Please use original accessories or accessories that are authorized Using any unauthorized accessories may affect your device s performance and violate related national regulations about telecom terminals Avoid using your device near or inside metallic structures or establishments that can emit electromagnetic waves Otherwise it may influence signal reception e Your device is not waterproof Please keep it dry and store ina shady and cool place e Do not use your device immediately after a sudden temperature change In such case it will produce dew inside and outside your device so don t use it until it becomes dry e Handle your device carefully Do not drop bend or strike it Otherwise your device will be damaged e No dismantling by non professionals and only qualified technicians can undertake repair work Operating temperature range of O C 35 C and humidity range of 5 95 are recommended Using Battery e Do not short circuit the battery as this can cause excessive heat and fire e Do not store battery in hot areas or dispose of it in a fire to avoid explosion e Do not disassemble or modify the battery Regulatory and Safety Information 53 e When not using the battery for a long period remove it from your device and store it in a cool dry place Never use any charger or battery damaged or worn out e Return the worn
12. APN obtained from your carrier 46 Advanced Settings Select the network Authentication mode The options are e None default e CHAP e PAP Enter the Username and Password if these are required for the wireless network Click Save To select the APN entry to use From the drop down box beside Profile Selection select the desired APN to use To remove an APN entry Select the APN you want to remove and click Delete Enable DMZ Ina DMZ demilitarized zone network configuration a computer runs outside the firewall in the DMZ This computer intercepts incoming Internet traffic providing an extra layer of protection for the rest of the network To enable DMZ and designate a computer to screen incoming traffic On the AT amp T Wi Fi Manager home page login as Administrator Click Settings on the navigation menu on the left side Advanced Settings 47 Click Firewall gt DMZ tab Select Enable beside DMZ Inthe DMZ IP Address field enter the IP address of the computer you want to have in the DMZ Click Apply Set Router Options To set the mobile hotspot s LAN options On the AT amp T Wi Fi Manager home page log in as Administrator Click Settings on the navigation menu on the left side Click Advanced gt Router tab Enter the desired information in the each section If the DHCP Server is enabled it automatically assigns an IP address to each device o
13. Disable Apply PIN i Seti PBC SVA Get Started Use Your Mobile Hotspot This chapter describes the main features of the touch screen and web interfaces for managing your mobile hotspot AT amp T Wi Fi Manager Home Page You must be logged in as Administrator to change settings and view detailed information Default home page URL http attwifimanager or http 192 168 1 1 Default Administrator Login attadmin To log in as Administrator On the AT amp T Wi Fi Manager home page place your cursor in the Login field and type attadmin the default Login Click Login AT amp T Wi Fi Manager Enter Admin Login Note Your login can be found on the home screen of your device More info Access the files on the SD card Use Your Mobile Hotspot 15 Security Credentials The mobile hotspot uses three passwords Wi Fi password Used to authenticate wireless devices notebook etc to your mobile hotspot network It is e Unique to your device e Displayed on the main mobile hotspot LCD screen If the screen is blank a power saving feature press and quickly release the Power button to view the information on the screen e Printed on a label on the mobile hotspot default password If you want to change the Wi Fi password see Change Wi Fi Network Names and Passwords on page 32 Guest Wi Fi Password When enabled temporary users can use this password to access the Gu
14. User Guide AT amp T Velocity Mobile Hotspot 5 18 of 10 GB Plan used 23 days left E My Device 3 35GB W Other s 1 83 GB Bo G Wi Fi Messages Settings ZTE xf Bringing you Closer Copyright 2014 ZTE CORPORATION All rights reserved No part of this publication may be excerpted reproduced translated or utilized in any form or by any means electronic or mechanical including photocopying and microfilm without the prior written permission of ZTE Corporation The manual is published by ZTE Corporation We reserve the right to make modifications on print a or update specifications without micro rior notice j microSDHC is a trademark of SD 3C LLC Qualcomm Gobi technologies are products of Qualcomm Technologies Inc Version No V1 0 Edition Time September 2014 Qualcomm MA gobi YW Contents Get Started 0000 n ence ees Know Your Device 0 ccc eee cence beeen enees Manage Your Device and Settings 20 0 6 eee ccc cee eee 3 Set Up and Connect to the Internet 0 0 8 Optional Autorun Installation For USB use only g Use Your Mobile Hotspot 0 0 0 000 c cece eee 15 AT amp T Wi Fi Manager Home Page 6 cece eee ees 15 Security CredentialS 0 0 c ccc cece cence nen e ence eens 16 View Your Data USage 2 ccc cect n eee ees 17 Manage WI vice bs chancarnbivaconisobedadenseneyvertensese ners 18 ee Se apie ra
15. avigation menu on the left side Click Advanced gt Administrator tab Home Settings Connected Devices Wi Fi Network Firewall Advanced 3 devices Administrator Router Device Reset Data Usage 0 15 of 4 GB used Messages Administrator Settings for AT amp T Wi Fi Manager 2 unread 2 total Current Login File Sharing 14 38GB free of 14 89GB New Login C Fg setings ine oon S l O On Display Login off About Note If you change your login and cannot remember it you will need to perform a hardware reset To do this remove the bottom cover of your AT amp T Wi Fi Manager and using a ballpoint pen press and hold the RESET button for 8 seconds to restore your device to Factory Default Settings and delete all stored user information You may then use the default login found on the bottom of your device or in the Quick Start If desired change the admin login maximum 32 characters Click Apply Note If you forget the admin login you will need to perform a hardware reset Use Your Mobile Hotspot 35 Change Wi Fi Security Types You can set the mobile hotspot s Wi Fi security types in the AT amp T Wi Fi Manager home page On the AT amp T Wi Fi Manager home page Login as Administrator Click Settings on the navigation menu on the left side Click Wi Fi gt Basic tab Select the desired security types for the Main Wi Fi and the Guest Wi Fi networks It is recommended
16. d to the Main Wi Fi and Guest WI Fi networks appears At the bottom of the list Swipe up if required tap Block List A list of blocked devices appears wll AT amp T 46 12 30 PM 100 wll AT amp T 46 12 30 PM a 100 S Connected Devices 1 A Block List f ZTE 20131205XCH android ad1c1431a2d1c532 Connected to ATT WIFI 2486 gt 00 d0 d0 14 16 fa Block List pe Use Your Mobile Hotspot To unblock one of these devices so it can connect to your mobile hotspot tap the device you want to unblock Tap OK On the AT amp T Wi Fi Manager home page To block a connected device Log in as Administrator Select Connected Devices A list of devices connected to the Main Wi Fi and Guest Wi Fi networks appears on the screen Connected Devices View devices currently connected to your AT amp T Wi Fi Manager You can block and unblock devices from accessing your AT amp T Wi Fi Manager by selecting the box for that device and clicking Apply Data Usage 0 15 of 4 GB used 4 of 10 device s connected via Wi Fi Messages Device Name MAC Address IP Address Block Access 2 unread 2 total ZTE 20131205XCH 00 1e e5 e5 a2 61 192 168 1 23 o File Sharing My Computer d4 9a 20 5e bd 89 192 168 1 15 14 38GB free of 14 89GB Settings android 54dafb427d4e29 0 ZTE 20151628BPO c8 be c8 e8 50 d5 192 168 1 31 o dc a cc fa 00 cd 72 78 192 168 1 34 About To block a listed device from connecting to your mobil
17. e From the drop down box select Short Sleep Mode From the drop down box select a shorter time period Settings Security Settings Wi Fi Coverage Sleep Mode Recharge the Battery The battery comes partially charged You can recharge the battery from a wall outlet or from the USB port on your computer To recharge the battery from a wall outlet fastest option Attach one end of the micro USB cable to the mobile hotspot and attach the other end to the wall charger included Use Your Mobile Hotspot 31 Plug the wall charger into a wall outlet The battery icon on the LCD screen indicates when the battery is fully charged EJ and an alert is displayed To recharge the battery from the USB port on your computer Attach one end of the micro USB cable to the mobile hotspot and plug the other end into the USB port on your computer The battery icon on the LCD screen indicates when the battery is fully charged EJ and an alert is displayed Security Change Wi Fi Network Names and Passwords You can customize the network names and passwords for the Main and Guest Wi Fi networks on the AT amp T Wi Fi Manager home page 32 Use Your Mobile Hotspot Change Main Wi Fi Name and Password On the AT amp T Wi Fi Manager home page Log in as Administrator Click Settings on the navigation menu on the left side Click Wi Fi gt Basic tab Change the Main Wi Fi network name and
18. e hotspot select the box for the device Click Apply To unblock a device Select Connected Devices on the navigation menu on the left side Use Your Mobile Hotspot ae The Blocked Wi Fi device s section shows all blocked devices Blocked Wi Fi device s Device Name MAC Address Unblock Access ZTE 20151628BPO c8 bc c8 e8 50 d5 To unblock a listed device so It can connect to your mobile hotspot select the box for the device and click Apply Message View SMS Messages You can view SMS messages on the mobile hotspot or AT amp T Wi Fi Manager home page On the mobile hotspot To view or delete messages From the home screen tap Messages Note The Messages icon shows the number of unread messages A list of messages appears previewing the first portion of the text Tap any message to read the full text If you want to delete the message go to the bottom of the message and tap Delete gt OK 24 Use Your Mobile Hotspot On the AT amp T Wi Fi Manager home page To view or delete messages Log in as Administrator Click Messages on the navigation menu on the left side A list of messages appears For any message in the list click the message to read If you want to delete the message click the boxes in front of the messages and select Delete File Sharing File sharing allows you to share the files on a microSDHC card via USB cable or web browser On the
19. e device has reset reconnect Wi Fi devices 42 Use Your Mobile Hotspot Advanced Settings This chapter provides information on how to configure advanced settings for various aspects of the device such as WI Fi settings WAN settings router settings etc Manage Wi Fi Set Wi Fi Network Options To configure the Wi Fi network options On the AT amp T Wi Fi Manager home page log in as Administrator Click Settings on the navigation menu on the left side Click Wi Fi gt Advanced Settings tab For the Main Wi Fi and Guest Wi Fi networks select the desired options Band Selection The Wi Fi band range used for the selected network 2 4 GHz uses less power and is longer ranged than 5 GHz but 5 GHz can provide higher speeds with less interference e Network Mode The WLAN protocol being used The recommended value depends on the band range selected 2 4 GHz 80211 b g n or 5 GHz 802 11 a n Frequency Channel The Wi Fi channel used The recommended value is Automatic which chooses the channel that will provide the least interference Click Apply Advanced Settings 43 Change Advanced Settings View WAN Information View detailed network Information such as the active network connection status signal strength etc On the AT amp T Wi Fi Manager home page log in as Administrator Click About Enable Port Forwarding If your computer hosts a server you can enable p
20. e hotspot enables you to create a Wi Fi network anywhere there is cellular network coverage You can use that Wi Fi network to connect your laptop and other Wi Fi capable devices to your network provider s mobile broadband network and connect to the Internet You can also use your mobile hotspot by connecting it to your laptop with the USB cable to access the Internet Additional features include e Touch screen LCD interface Configure basic Wi Fi and display settings view data usage details view system and network provider messages Wi Fi Protected Setup WPS A fast easy way to connect WPS enabled devices to your WI Fi network e Guest Wi Fi Set up a guest Wi Fi network for temporary users and use the main network for trusted devices Get Started Status LED indicator Touch screen WPS microSDHC button wll AT amp T 46 12 30 PM Main Wi Fi ATT WIFI 2388 Password 29182314 5 18 of 10 GB Plan used 23 days left Ooh E My Device 3 35GB W Other s 1 83 GB Wi Fi Messages Settings Micro USB Charging port z 100 E Power button SIM card cover reset button Get Started Manage Your Device and Settings You can manage your device and change settings using The device s LCD touch screen Configure basic Wi Fi and device settings and view data usage and messages The AT amp T Wi Fi Manager home page Web user interface for configuring mobile broadband network set
21. est WI Fi network If you want to change the Wi Fi password see Change Wi Fi Network Names and Passwords on page 32 Admin Login Used to log into the AT amp T Wi Fi Manager home page as Administrator You must be logged in as Administrator to use certain features and to make changes to your mobile hotspot settings The default admin login is attadmin The admin login can be changed to 4 32 characters You can change these passwords on the AT amp T Wi Fi Manager home page http attwifimanager 16 Use Your Mobile Hotspot View Your Data Usage You can view estimates of your data usage not accurate for billing purposes on the mobile hotspot and the AT amp T Wi Fi Manager home page The plan data counter resets automatically when the next billing cycle starts will AT amp T 46 12 30 PM a 100 Main Wi Fi ATT WIFI 2388 Password 29182314 5 18 of 10 GB Plan used 23 days left EO gt E My Device 3 35 GB W Other s 1 83 GB Wi Fi Messages Settings Tap to view usage details To view detailed data usage information On the mobile hotspot home screen tap the data usage bar On the Data Usage screen swipe down up to view all of the details for Data Alert Receive a notification when you reach a specified data usage point e My Device View an estimate of your data usage e Disclaimer View a disclaimer about data usage e Next Billing Date See when your billing cycle reset
22. git IMEI behind the battery of the device e Complete description of the problem e Transportation prepaid Other Warranty Programs You may have other warranty programs with your purchase Such as warranty exchange If so please refer to equipment package or the original point of sale 60 Warranty 61 Notes
23. he settings Launch the browser on your PC tablet smartphone connected to the device via Wi Fi and enter http attwifimanager or http 192 168 1 1 in the address bar Use Your Mobile Hotspot 2 Click Access the files on the SD Card on the login window to access the files on the microSDHC card AT amp T Wi Fi Manager Enter Admin Login Note Your login can be found on the home screen of your device More info Access the files on the SD card Battery Battery Life The mobile hotspot is configured by default to optimize battery life Battery life is affected by e Standby time Data throughput Mobile broadband signal strength the better the signal the longer the battery life Wi Fi Range Long Extends Wi Fi range but decreases battery life e Medium Balances Wi Fi range and battery life e Short Reduces Wi Fi range but extends battery life 28 Use Your Mobile Hotspot There are several methods you can use to extend the battery life Adjust Wi Fi settings Shorten the Wi Fi range If the devices you are connecting to your Wi Fi network are always near the mobile hotspot device shorten the Wi Fi range Set the Wi Fi Standby timer to a shorter period Reduce the amount of time to wait when no devices are connected to either Wi Fi network before going into sleep mode Wi Fi radio powers off e Adjust display settings Dim the screen Reduce the LCD s brigh
24. n the body as described in this user guide is 1 08 W kg Body worn measurements differ among device models depending upon available enhancements and FCC requirements While there may be differences between the SAR levels of various devices and at various positions they all meet the government requirement The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines SAR information on this device is on file with the FCC and can be found under the Display Grant section of http www fcc gov oet ea fccid after searching on FCC ID SRQ MF923 SAR compliance for body operation is based on a separation distance of 10 mm between the unit and the human body Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level FCC Compliance This device complies with part 15 of the FCC Rules Operation is Subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Regulatory and Safety Information 59 Caution Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment Note This equipment has been tested and found to comply with the limits for a Class B digital device pu
25. n the network and manages their configuration information Click Apply 48 Advanced Settings Troubleshooting Suggested Solution Cannot Refresh network list and select the establish the correct SSID WI FI connection Check the IP address to make sure between your your client can obtain an IP address device and client automatically in the Internet protocol TCP IP properties Type the correct network key WI FI password when you connect to the device The client connected to the device cannot access the Internet Make sure your SIM card is available Change the location to find a place with good signal Contact your service provider Cannot visit the Enter the correct address The default web user interface address is http 192 168 1 1 or configuration page http attwifimanager Only use one network adapter in your PC Do not use any proxy server Troubleshooting 49 Suggested Solution About the Select Wi Fi on the home screen to password check the Main Guest Wi Fi Network password or check the label on the device to get them If you changed the password and forgot the new password you need to restore the device to the factory default settings 50 Troubleshooting Specifications Mechanical Specifications Weit 180g Dimensions 114x63x17 mm Display 2 4 QVGA TFT LCD 240 x 320 pixel Capacitive touch screen 256 MB RAM 512 MB ROM 2 800 mAh Supported RF Bands Tech
26. nal end user purchaser of the Product and provided that your purchase was made from a supplier authorized by the Seller Transfer or resale of a Product will automatically terminate warranty coverage with respect to that Product This limited warranty is not transferable to any third party including but not limited to any subsequent purchaser or owner of the Product This limited warranty is applicable only to end users In the United States This product or phone is warranted for 12 twelve months trom date of purchase For warranty service information please call ZTE service number 877 817 1759 Toll free The manufacturer s website http www zteusa com is alSo available for assistance This warranty only applies if the product has been used in accordance with the manufacturer s instructions under normal use and with reasonable care What this warranty does not cover a Defects or damages resulting from the misuse of this product 5S Warranty b Defects or damages from abnormal use abnormal conditions improper storage exposure to moisture dampness or corrosive environments unauthorized modifications unauthorized repair neglect rough handling abuse accident alteration improper installation incorrect voltage application food or liquid spoilage acts of God c Normal wear and tear d If the Product has been opened modified or repaired by anyone other than a warranty service center or if itis
27. ne radon eter EEE EEEE E TET 24 Sees aeea E E A E A E E ae POU aotedaoer san seuaauer eens tascaanaaus bet saan E NESES 28 DOCU a EEEE E E E EEE EE AE 32 Configure Data Network Options 0c eee eee 37 View Deall eiaa tens aE ERE ANTEE NA TE oS Replace the SIM Card 0 ccc ccc ccc ence ee ene ens 4 Reset the Mobile Hotspot 00 e eee eee 42 Advanced Settings 0 0 0 ccc tenes 43 Manage Wi Fi sprerrersa res omecins ani dnetadan EERE RESSE EESTE 43 Change Advanced S ttingS cccc cece eee eee cne te kne 44 Contents Troubleshooting 0 00 0 n eee e ees 49 SpecificationS uaua urrera e cece e nen ees 5i Regulatory and Safety Information 0 52 eret aD once ssa 9h caesar cea es recy cas nee anos ee ey Using Your DeVICE 0 ccc nen n ene nee 5S Wene BA irena AEE are E EET AAEN hese 5S RaGIO FrEGUuChCy RF ENGI OV errre stiir E ENER 54 TOn Ss fads ect aaeiaes eee ueesoueeuse re EE oo CTIA REGUIFEIIONS eere ses ouwe E EEE 56 Warranty asuaan auauua urane arrer neru anann naarn 58 Limited Warranty eercecrreirrr srn cece ncn r ENEE ENES 5g How to Get Warranty Service 00 0 60 Otner Warranty PrOSlaIMS cx 2 ia anen ERE EEE eaaintes 60 ji Contents Get Started This chapter provides an overview of the Velocity Mobile Hotspot features and instructions on how to set up your mobile hotspot and connect to the Internet Know Your Device Your mobil
28. nology Band 2 Band 4 Band 5 Band 17 UMTS HSPA Band 1 Band 2 Band5 Specifications 51 Regulatory and Safety Information To the Owner e Some electronic devices are susceptible to electromagnetic interference sent by your device if inadequately shielded such as the electronic system of vehicles Please consult the manufacturer of your device before using if necessary e Operating your device may interfere with medical devices such as hearing aids and pacemakers Please always keep them more than 20 centimeters away from such medical devices when they are powered on Power your device off if necessary Consult a physician or the manufacturer of the medical device before using your device Be aware of the usage limitation when using your device at places such as oil warehouses or chemical factories where there are explosive gases or explosive products being processed Power off your device if required The use of electronic transmitting devices is forbidden in aircrafts at petrol stations and in hospitals Please observe and obey all warning signs and power off your device in these conditions e Do not touch the inner antenna area if not necessary Otherwise It will affect your device s performance e Store your device out of the reach otf little children Your device may cause injury if used as a toy e Do not touch the metallic parts of your device so as to avoid a burn when your device is working 5
29. ort forwarding so that other users can access the server To enable port forwarding On the AT amp T Wi Fi Manager home page log in as Administrator Click Settings on the navigation menu on the left side Click Firewall gt Port Forwarding tab Select Enable beside Port Forwarding Settings and then click Apply The Port Forwarding list will appear Incoming traffic is forwarded to specific ports and devices on your network using their local IP addresses Identify the ports to forward Enter the port forwarding information the IP address the Port range the Protocol and the comment and then click Apply Caution Port forwarding creates a security risk When not required port forwarding should be disabled 44 Advanced Settings Enable MAC IP Port Filtering You can Enable or Disable the Mac IP Port Filtering feature as needed to block certain Internet traffic If this setting is enabled you can then choose whether traffic is Accepted or Dropped by default by selecting the appropriate option from the Default Policy drop down box To enable port filtering On the AT amp T Wi Fi Manager home page log in as Administrator Click Settings on the navigation menu on the left side Click Firewall gt MAC IP Port Filtering tab Select Enable Select the Default Policy e Accepted Internet traffic is allowed by default Only traffic from the selected applications will be blocked from
30. our Mobile Hotspot 37 Tap Search Network to search for all available networks Notes e You will be able to search for networks only when you are roaming internationally e If Internet Status is On under Allow Mobile Data you must first turn Internet off before you can toggle search for networks e If you wish to disable International Roaming and you are roaming and data is connected you must first turn off Internet under Allow Mobile Data Touch a network in the network list to register manually You can also tap the On Off button beside Select automatically to select preferred network automatically On the AT amp T Wi Fi Manager home page Login as Administrator Click Settings on the navigation menu on the left side Click Network gt Connections tab Under International roaming select On Click Apply View Details You can view details about your device such as the wireless number hardware version and IMEI on the mobile hotspot or the AT amp T Wi Fi Manager home page 38 Use Your Mobile Hotspot On the mobile hotspot From the home screen tap Settings Tap About Your Device Swipe the screen to scroll through the information On the AT amp T Wi Fi Manager home page Login as Administrator Click About on the navigation menu on the left side About Your Mobile Hotspot Wireless Number 999 555 0101 Device ID ZV 12345678 3 Connected device s Make Model of Device
31. out battery to the provider or put it in the appointed recycle place Do not dispose of the battery in the trash WARNING If the battery is broken keep away from it If it taints your skin wash your skin with abundant fresh water and ask doctor for help if necessary Radio Frequency RF Energy This device meets the government s requirements for exposure to radio waves This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency RF energy set by the Federal Communications Commission of the U S Government The exposure standard for wireless mobile devices employs a unit of measurement known as the Specific Absorption Rate or SAR The SAR limit set by the FCC is 1 6 W kg Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands Although the SAR is determined at the highest certified power level the actual SAR level of the device while operating can be well below the maximum value This is because the device is designed to operate at multiple power levels so as to use only the poser 54 Regulatory and Safety Information required to reach the network In general the closer you are toa wireless base station antenna the lower the power output The highest SAR value for the device as reported to the FCC when tested for use at the ear is 1 08 W kg and when worn o
32. rements for Battery System Compliance to IEEE 1725 Use of an unqualified battery or charger may presenta risk of fire explosion leakage or other hazard e Do not short circuit a battery or allow metallic conductive objects to contact battery terminals T Replace the battery only with another battery that has been qualified with the system per this standard IEEE Std 1725 Use of an unqualified battery may present a risk of Tire explosion leakage or other hazard g Promptly dispose of used batteries in accordance with local regulations h Battery usage by children should be supervised 1 Avoid dropping the phone or battery If the phone or battery is dropped especially on a hard surface and the user Suspects damage take it to a Service center for inspection j Improper battery use may result in a fire explosion or other hazard For those host devices that utilize a USB port as a charging source the host device s user manual shall include a statement that the phone shall only be connected to CTIA certified adapters products that bear the USB IF logo or products that have completed the USB IF compliance program Regulatory and Safety Information B7 Warranty ZTE offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship for a period that expires one year trom the date of sale of the Product to you provided that you are the origi
33. rsuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help CTIA Requirements a Donot disassemble or open crush bend or deform puncture or shred 56 Regulatory and Safety Information b Do not modify or remanufacture attempt to insert foreign objects into the battery immerse or expose to water or other liquids expose to fire explosion or other hazard c Only use the battery for the system for which it is specified d Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requi
34. s and how you re doing with data usage Use Your Mobile Hotspot 17 You can also view data usage information on the AT amp T Wi Fi Manager home page under Data Usage Click Data Usage for more detailed information Manage Wi Fi View Connected Devices You can view a list of devices connected to your mobile hotspot on the mobile hotspot or the AT amp T Wi Fi Manager home page On the touch screen From the home screen tap Wi Fi Tap Connected Devices A list of devices connected to the Main Wi Fi and Guest Wi Fi networks appears To view the IP and Mac addresses of one of the devices tap the device name On the AT amp T Wi Fi Manager home page Login as Administrator Select Connected Devices on the navigation menu on the left side A list of devices connected to the Main Wi Fi and Guest Wi Fi networks appears on the screen You can view the IP and Mac addresses of the devices 18 Use Your Mobile Hotspot Connected Devices View devices currently connected to your AT amp T Wi Fi Manager i a You can block and unblock devices from accessing your AT amp T Wi Fi Manager by selecting the box for that device and clicking Apply 4 of 10 device s connected via Wi Fi i MAC Address ZTE 20131205XCH 00 1e e5 e5 a2 61 My Computer d4 9a 20 5e bd 89 ZTE 20151628BPO c8 bce c8 e8 50 d5 android 54dafb427d4e29 cc fa 00 cd 72 78 de Set Maximum Number of Connected Devices You can connect up to 10
35. sage will appear if your mobile hotspot s battery is low Plug your mobile hotspot into your wall charger and then tap Begin This ensures the update will complete without the device shutting off midway through the update 40 Use Your Mobile Hotspot Replace the SIM card Your mobile hotspot comes with the SIM card pre installed If you need to replace the SIM card Power off your mobile hotspot and open the SIM card cover Remove the existing SIM card if present Insert the SIM card and close the SIM card cover Use Your Mobile Hotspot 4 Reset the Mobile Hotspot You can reset the mobile hotspot to the factory setting on the mobile hotspot or the AT amp T Wi Fi Manager home page This is useful if you have lost your Admin Login for the AT amp T WI FI Manager home page Notes e f you reset the modem to factory settings all of your customizations will be lost If you want to keep them save them before doing the reset then restore them afterward e When you reset the mobile hotspot any currently connected devices will lose access and will have to be reconnected after the mobile hotspot restarts On the mobile hotspot From the home screen tap Settings Tap Factory Reset On the AT amp T Wi Fi Manager home page On the home page click Settings on the navigation menu on the left side Click Advanced gt Device Reset tab Click Reset Click Yes After th
36. that you use WPA2 AES PSK whenever possible Security Type the most common mode e WPA2 AES PSK Recommended Other users can access your mobile hotspot only if they enter the correct password e OPEN Not recommended Anyone can access your Wi Fi network without a password and you are responsible for charges incurred Main Wi Fi Network Network Name SSID ATT WIFI 2486 Security Type WPA2 AES PSK Password 12345678 Password Visible Broadcast Network Name SSID O Enable Disable 36 Use Your Mobile Hotspot Guest Wi Fi SSID Guest Wi Fi Manager Switch O Enable Disable Network Name SSID ATT WIFI 2486 GUEST Security Type WPA2 AES PSK v Password 12345678 Password Visible Generate random password when enabled Broadcast Network Name SSID O Enable Disable Click Apply Reconnect your Wi Fi devices if necessary using the new Wi Fi credentials See Connect to the Internet on page 10 Configure Data Network Options You can choose the network types that your mobile hotspot can connect to and choose whether to allow the mobile hotspot to be used when roaming internationally On the mobile hotspot From the home screen tap Settings Tap International Roaming Choose the appropriate option e To enable disable international roaming tap the On Off button next to International roaming to power international roaming on or off Use Y
37. the mobile hotspot will be disconnected when the Wi Fi radio resets You can block a device that is currently connected to your mobile hotspot and it will not be able to connect to your WI FI unless you choose to unblock it Some reasons that you may want to block a device include Stopping them from overusing your bandwidth and possibly resulting in charges for overages on your plan e Temporarily blocking a child from surfing the Internet You can block unblock devices from the mobile hotspot or the AT amp T WI Fi Manager home page On the mobile hotspot To block a connected device From the home screen tap Wi Fi Tap Connected Devices A list of devices connected to the Main Wi Fi and Guest Wi Fi networks appears To block a listed device from connecting to your mobile hotspot tap the device name Use Your Mobile Hotspot 21 ull AT amp T 46 12 30 PM a 100 ull AT amp T 46 12 30 PM a 100 E S Connected Devices 2 A ZTE 20131205XCH Connected to ATT WIFI 2486 gt gt android ad1c1431a2d1c532 A IP 192 168 0 90 android ad1c1431a2d1c532 Connected to ATT WIFI 2486 G Connected to ATT WIFI 2486 GUEST MAC Address 00 d0 d0 14 16 fa Tap Block Tap OK The mobile hotspot will reset and the blocked device will not be able to reconnect to access the Internet To unblock a device From the touch screen tap Wi Fi Tap Connected Devices A list of devices connecte
38. tings and advanced WI Fi and device settings Note To personalize the mobile hotspot and change basic settings tap Settings or Wi Fi on the LCD home screen For advanced settings use a Wi Fi enabled device to connect to the mobile hotspot and then use a browser to display the AT amp T Wi Fi Manager home page http attwifimanager Log in as Administrator to make changes default admin login is attadmin Power Button Power Button Usage Press and hold the Power button to power on off the mobile hotspot Press the Power button to wake up the mobile hotspot Get Started 3 LCD Touch Screen Icons on the touch screen s top row Indicate the status of the mobile hotspot and several screen elements can be tapped or Swiped to configure Wi Fi and device settings view data usage details and view carrier messages Signal strength WI Fi network name amp password Tap for usage details Tap for WPS Guest Wi Fi and Network indicator will AT amp T 46 12 30 PM Main Wi Fi ATT WIFI 2388 Password 29182314 5 18 of 10 GB Plan used 23 days left I r gt E My Device 3 35 GB W Other s 1 83 GB Wi Fi Messages Settings Tap to view messages other options New message Battery Customizable data alert Tap to change display file Sharing mode and other settings Get Started LCD Home Screen Elements Network signal strength Wi Fi network name and Wi Fi password Used
39. tness level Set the Display Timeout to a shorter period Reduce the amount of time to wait without the LCD being used before the screen goes dark Extend Battery Life You can choose Wi Fi and display settings on the mobile hotspot or the AT amp T Wi Fi Manager home page to extend the mobile hotspot s battery life On the mobile hotspot From the home screen tap Wi Fi Use Your Mobile Hotspot 29 Adjust these settings Wi Fi Sleep Mode Select a shorter time period The shorter the time the longer the battery life Wi Fi Range Select Medium or Short wll AT amp T 48 12 30 PM 100 m PD Wi Fi Range A Longer ranges consume more battery power Long O Medium Short Go back to the Settings screen and then tap Display Adjust these settings Screen Brightness Tap or to adjust the brightness Display Timeout Select a shorter time period wll AT amp T 48 12 30 PM 100 all AT amp T 48 12 30 PM 100 Screen Brightness A Select the desired brightness of your screen S Display Timeout A O 30 seconds Dimmest Brightest O 1 minute coe 5 minutes Never 30 Use Your Mobile Hotspot On the AT amp T Wi Fi Manager home page Log in as Administrator Click Settings on the navigation menu on the left side Click Wi Fi gt Advanced Settings tab Adjust these settings in the Security Settings section Wi Fi Coverag
Download Pdf Manuals
Related Search