Home

User manual - Dream Multimedia

1. 3 With the Navigation Buttons AV choose the option Service searching and press the OK Button 4 With the Navigation Buttons AV choose the option Tuner configuration and press the OK Button 5 With the Navigation Buttons AV choose the DVB T Tuner and press the OK Button 6 With the Navigation Buttons choose your region 7 If you have connected an active antenna and you want to run the antenna without its original power supply set the Enable 5V for active antenna option to On 8 Press the OK Button to save this settings The same setup possibilities apply if you are using a second DVB T tuner in your Dreambox see Chapter 7 3 DVB T Tuner Configuration on page 64 7 4 Automatic scan Follow this steps 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option Service searching and press the OK Button 64 4 With the Navigation Buttons AV choose the option Automatic scan and press the OK Button 5 Set all tuners with which you want to search to yes Use the Navigation Buttons AV to choose the tuner and the Navigation Buttons lt p to switch to yes 6 Press the OK Button to start the scan Service scan Automatic Scan Clear before scan Scan Tuner A DVB S2 Press OK to scan Automatic scan Use
2. 2 Enter the desired 3 digit Code 000 999 with the Numeric Keypad Now press the Mute or Volume Button in order to check if the tv device responds to the just entered code If there is no response please try it again with the next code from the list according to the steps above 3 If none of the given codes is suitable please proceed with the chapter Programming by Scan function If no code is entered within 6 seconds or the TV Mode Button is pressed the remote control will exit the programming mode automatically Programming by Scan function In this programming method the dreambox rcu sends every second another shutdown code to the tv device until the tv shuts off Use this method of programming if the Programming with Code wasn t successfully or the vendor of your specific tv device isn t listed 1 Press the OK Button and the TV Mode Button for 3 seconds 74 2 Enter 777 with the Numeric Keypad in order to start the scan mode and point the rcu with ir sensor into the direction of your tv device 3 As soon as the tv device shuts down Hint Depending on the type of your tv device this can last some minutes immediately press the OK Button to store the current code and leave the scan mode If no code is entered within 6 seconds or the TV Mode Button is pressed the remote control will exit the programming mode automatically Programming by Learning function In this programming method the func
3. Press the Navigation Buttons AV to open the channellist With the Navigation Buttons AV choose the channel you want to delete By pressing the MENU Button the Channellist menu will open up With the Navigation Buttons AV choose the option remove service and press the OK Button The selected service will be deleted from your favorites list Moving a service to favorites Press the Navigation Buttons AV to open the channellist By pressing the MENU Button the Channellist menu will open up With the Navigation Buttons AW choose the option enable move mode and press the OK Button With the Navigation Buttons AV choose the service you want to move and press the OK Button The service will be highlighted in red With the Navigation Buttons AV move the channel to the desired position and press the OK Button to place the service at its new position You can move services as long as the move mode is activated Press the Navigation Buttons AV to open the channellist With the Navigation Buttons AV choose the option disable move mode and press the OK Button Adding a marker to favorites With the help of markers you will be able to switch fast to a certain position within a bouquet Follow this steps Press the Navigation Buttons AV to open the channellist Use the Bouquet Buttons to switch to the desired bouquet to which you want to add markers
4. Zap Add timer 11 15 11 45 12 45 ZDF Mittags Das Erste Afrika im jan aroari En fi ZDF Mittags d magazi drehschei ZDF HD SOKO 2 heute re ee service M chste In aller A hrt Panda illa amp Co hr fernseh Ener SER zn ee A Freundschaft Mitten Unsere erste RTL irn gemeinsame Punkt 12 Das RTL Mittagsjournal Leben Wohnung SAT 1 Richterin site Richter Hold Britt Afrika im Herzen D 11 23 10 35 12 00 Tuesday Afrika im Herzen ist die Fortsetzung des erfolgreichen Dramas F r immer Afrika mit Christine Neubauer und Francis Fulton Smith in den Hauptrollen Using the Navigation Buttons A Y 4 you can browse the shows More detailed information about the selected show is displayed in the bottom part of the EPG You can directly set a timer for the selected show by just pressing the green Options Button 20 Time Date Input Time Date Input Press the Menu Button in the Multi EPG view Cancel OK Date 06 September 2011 Time 11 22 After you have entered the desired time and date press the A window will appear where you can enter a time and date OK Button to activate your selection 3 11 Teletext Videotext 1 Press the Text Button 2 Choose TeleText and press the OK Button You are now in Teletext Mode You can quit this mode by pressing the EXIT Button Keep in mind that not every station transmits Teletext Teletext regular navigation If you are viewing
5. AV choose the option Mode 56 7 With the Navigation Buttons lt p choose the option Single 8 With the Navigation Buttons AV choose the option Satellite 9 With the Navigation Buttons lt p choose the desired Satellite 10 Press the OK Button to save this settings You are taken back to the Choose tuner menu If you have trouble with Tune failed messages please set the Send DiSEqC only on sattelite change to yes 7 1 2 Two satellites via Toneburst A B Use this type of configuration if you want to receive two satellites from one LNB each It does not matter if you use one or two dishes to achieve this Connect the two coax cables from the two LNBs to a so called Toneburst switch and connect the coax cable from the Toneburst switch to your Dreambox Reception Settings Configuration Mode simple Mode Toneburst A B Port A Astra 19 2E Port B Hotbird 13 0E Two satellites via Toneburst Follow this steps 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option Service searching and press the OK Button 4 With the Navigation Buttons AV choose the option Tuner configuration and press the OK Button 5 With the Navigation Buttons AW choose the option DVB S2 Tuner and press the OK Button 6 W
6. Buttons AY choose the option Network Setup and press the OK Button 5 Use the Navigation Buttons and the Numeric Keypad to change the settings Wired This option toggles the integrated ethernet interface on and off Manually setting an IP address These settings are only needed if you want to configure your Network manually 1 With the Navigation Buttons AV choose the cable based network Wired and press the OK Button 2 Press the yellow Options Button 3 With the Navigation Buttons AW choose the option Method IPv4 and press the OK Button 4 With the Navigation Buttons lt p choose the option manual and press the OK Button Address IPv4 Enter the IP address here Free IP Addresses 192 168 0 2 192 168 0 254 Mask IPv4 Enter the subnet mask Usually 255 255 255 0 Gateway IPv4 Enter the router s IP address here if the Dreambox is connected to the Internet by a router Usually this is 192 168 0 1 To save the settings and activate the network connection press the OK Button DNS Settings 1 With the Navigation Buttons AV choose the cable based network Wired and press the OK Button 2 Press the blue Options Button to open the DNS Settings dialog The colored buttons in this menu are mapped to the following functions red Options Button Delete selected nameserver green Options Button Add IPv4 nameserver yellow Options Button Add IPv6 nameserver
7. Editor 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AW choose the option Timer and press the OK Button Timer Editor Delete ZDF HD SOKO Kitzbihel Today 11 30 11 35 5 mins recording ZDF HD heute Today 12 00 12 15 15 mins waiting ZDF HD heute Today 15 00 15 05 5 mins disabled Timerlist Pressing the red Options Button will delete a timer The green Options Button adds a timer the yellow Options Button toggles active on and off only possible in waiting status and the blue Options Button removes finished timers from the list With the Navigation Buttons AV choose an existing timer and press the OK Button to edit The status of a timer is shown on the right side waiting means still coming up recording means recording right now done means recording finished the red X indicates that a timer was deactivated 43 If you pressed the blue Options Button you will be asked if you really want to delete the finished timer Use the Navigation Buttons AV to select Press the OK Button to activate i Your Dreambox will be turned on 5 minutes before the recording if a recording is supposed to start while the Dreambox is in Standby mode 5 3 4 Timeshift Press the PLAY PAUSE Button to pause the screen video and audio will pause The recording will continue in the background You can fast forward and rewind while recording as lon
8. FR3 MONTPELLIER FR3 VIA STELLA DATA SYSTEM 120 Press the OK Button to store the found channels or the EXIT Button to cancel 66 7 5 Manual scan Follow this steps 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option Service searching and press the OK Button 4 With the Navigation Buttons AV choose the option Manual scan and press the OK Button Service scan Tuner Tuner A BCM4505 DVB S2 Type of scan Single transponder System DVB S2 Satellite Astra 19 2E Frequency 12544 Inversion Auto Symbol Rate 22000 Polarity horizontal FEC 9 10 Modulation QPSK Rolloff 0 35 Pilot Auto Network scan Clear before scan Press OK to start the scan Manual scan With the Navigation Buttons AW choose the tuner on which you want to run the manual service scan All other options can be changed by using the Navigation Buttons A Y Press the OK Button to start the manual scan 67 Chapter 8 Systeminformation 8 1 Service This window shows detailed technical information about the current service Serviceinfo Serviceinfo Name Provider Videoformat Videosize Namespace Service Reference Transponder Tuner status SAT 1 ProSiebenSat 1 4 3 720x576 0x00c00000 1 0 1 445C 453 1 C00000 0 0 0 channel information Follow this s
9. Follow this steps 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AW choose the option Standby Restart and press the OK Button 3 With the Navigation Buttons AV choose the option Sleep timer and press the OK Button Sleep Timer Shutdown Dreambox after 30 minutes Timer status Disabled Action Enable timer 2 Sleep timer action Deep Standby a Ask before shutdown yes 2 Use time of currently running service Sleep timer Shutdown Dreambox after Set the number of minutes after you wish the predetermined shutdown action to be executed Timer Status Set this option to enabled to activate a set sleep timer or to disabled to deactivate a set sleep timer Press the red Options Button to change the status Sleep timer action Select Standby to completely turn off you Dreambox or Idle mode to put it into idle mode Press the green Options Button to toggle the sleep timer action Ask before shutdown If this option is set to Yes a safety window will appear once the sleep timer is executed asking you if you really want to turn off your Dreambox Press the yellow Options Button to toggle this option Use time of currently running service Press the blue Options Button to take over the remaining time of the service as shutdown time Once you have set all options to your liking press the OK Button to save your settings A short note w
10. OLED Display http dm7080 or http IP Adress IP Adress has to be replaced by the ip address shown in the display of your box In our example it would look like this http dm7080 2 Click on Online recovery on the given site in your Browser 3 Click on GO to start the recovery process Your dreambox will try to download and install the latest software now If there is no internet connection available at this moment it will try to install the software from a previous recovery session The progress bar only works with activated Javascript Make sure that Javascript is activated in your Browser 4 After the recovery process has been finished click on Click here to reboot Your dreambox will reboot and after a few seconds the installation wizard welcomes you See chapter 2 3 Start wizard on page 15 12 Chapter 10 Troubleshooting Problem No audio no video OLED Display lit Beamlike blackouts in the video No reception on a channel that was working before You cannot record anything any more Remote control is not working Dreambox does not react Possible cause Faulty wiring Faulty LNB Wrong Tuner setting Solution Check wiring and connections Exchange LNB Review settings see chapter 7 1 DVB 52 Tuner Configuration on page 56 Dish aligned incorrectly Heavy rain or snow Realign dish Remove snow from dish Dish aligned incorrectl
11. SIXX Will amp Grace ANIXE SD WU Sindbad Abenteuer auf de EPG Selection Zap Add timer Prev Next NOW NEXT MORE Today 6 9 Das Erste HD 12 00 12 15 heute ZDF HD 12 00 12 15 heute hr fernsehen 11 30 12 00 N chste Ausfahrt Shanghz RTL 11 30 12 00 Unsere erste gemeinsame SAT 1 11 59 12 59 Richter Hold RTL2 11 58 12 58 X Diaries love sun amp fun ProSieben 11 46 12 15 Malcolm mittendrin kabel eins 11 55 12 26 BillCosby Show TELES 12 30 13 20 Earth Final Conflict D VIERTE 12 59 16 00 ANIXE Family VOX 11 25 11 30 vox nachrichten zdf_neo 11 30 12 15 Beverly Hills 90210 SIXX 11 22 12 05 O C California ANIXE SD 11 25 1150 Anne mit den roten Haaren General overview of the following programming If you have set the Multi bouquets option to yes see Chapter6 2 Customize on page 48 a selection of your bou quets will appear Select the bouquet for which you want the Multi EPG view This view shows the currently airing shows on the ser vices listed in the left column A progress bar showing the progress of the currently airing show is placed next to the service s name With the Navigation Buttons AV you can select a ser vice just like in the service list and change to the selected service by pressing the red Options Button EPG Selection Zap Add timer Prev Next NOW NEXT MORE Today 6 9 Das Erste HD 12 15 13 00 ARD Buffet ZDF HD 12 15 13 00 drehs
12. any Teletext page you can enter the interactive mode by pressing the OK Button Use the Navigation Buttons AV to select a text page number and press the OK Button to call this page You don t need to type in a text page number in this mode but it is still possible Bouquet Button toggle between double high from the upper half double high from the lower half and full view text page Bouquet Button Open Favorites Management TV Button to activate or deactivate the PIG Mode Picture in Graphics Same view from Text page and Program picture best results are show on 16 9 TV s during 4 3 transmission RADIO Button Press this button a couple of times to toggle the view between transparent mode and normal mode 26 Teletext Konfigurationsmen TeleText Einstellungen If the Teletext page 100 is shown you can press the MENU Button to enter the Teletext configuration menu nder anzeigen eteilter Bildschirm uffern im Hintergrund ebu You have the following options Scale filter and Scale filter zoom You can choose between following scale options e bilinear e anisotropisch e scharf e sch rfer e deaktiviert Brightness Here you can adjust the brightness of your Teletext Press the Navigation Buttons lt p gt to adjust the brightness Contrast Here you can adjust the contrast of your Telext If you press the Navigation Button 4 the Teletext is getting darker when pressing the Navigati
13. blue Options Button Skip changes Nameserver Enter the DNS Server s IP address here DNS is used to translate a Domain name to an IP address Normally if the Type is set to LAN there is no need for a DNS entry If the Dreambox is connected to the Internet over a router enter the router s IP address here 92 Note If you have set the Method IPv4 option to dhcp you won t have to enter anything here since this will be done automatically 6 6 2 Integrated wireless WLAN 1 10 11 Press the Menu Button to open the main OSD menu With the Navigation Buttons AV choose the option Setup and press the OK Button With the Navigation Buttons AV choose the option Network and press the OK Button With the Navigation Buttons AV choose the option Network Setup and press the OK Button Please put your WiFi USB Stick in one of the USB ports of your Dreambox A new menu entry WiFi will show With the Navigation Buttons AV choose the option WiFi Press the green Options Button to scan for available WiFi networks With the Navigation Buttons AV choose the WiFi network you want to connect and press the OK Button You will be asked to enter the password by which the WiFi network is secured Please take care that the password is case sensitive Use the Numeric Keypad to enter the password If the connection has been successful the status will switch
14. choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option Service searching and press the OK Button 4 With the Navigation Buttons AV choose the option Tuner configuration and press the OK Button 5 With the Navigation Buttons AV choose the option DVB S2 Tuner and press the OK Button 6 With the Navigation Buttons AV choose the option Mode 7 With the Navigation Buttons lt p choose the option Rotor 8 With the Navigation Buttons AV choose the option Longitude 9 Use the Numbers 0 9 to enter the coordinates of your residence 10 With the Navigation Buttons AW choose the option Latitude 11 Use the Numbers 0 9 to enter the coordinates of your residence 12 Press the OK Button to save this settings 7 1 6 Stab Positioner without USALS Use this type of configuration if you want to receive many satellites without a Stab positioner from a Single Universal LNB The coax cable is directly connected from your Dreambox to the LNB Reception Settings Configuration Mode advanced Satellite Astra 19 2E LNB LNB 1 Priority Auto LOF Universal LNB Voltage mode Polarization Increased voltage Tone mode DiSEqC mode Toneburst Committed DiSEqC command Fast DiSEqC Sequence repeat Command order committed toneburst Uncommitted DiSEqC command None DiSEqC repeats None Stab Positioner without USALS Follow
15. from idle to Connected Network Config Reset Active Connection TENA Wired WiFi IPv4 m FRITZ Box Gastzugang Address 192 168 0 70 x Netmask 255 255 255 0 MN TOP SECRET Gateway 192 168 0 1 AX Nameserver i 192 168 0 1 Wired Timeserver Wired 192 168 0 1 Y 192 168 0 70 Connected Press OK to connect found Wireless Networks 59 6 7 Common Interface Smartcard Use of the ci slot 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option Common Interface and press the OK Button Reset This options resets your Cl Module This function is needed if you are experiencing trouble with one of your encrypted services Init This option initializes an inserted Smartcard It is recommended to insert the Cl Module with the Smartcard already in it No module found No CI Module is inserted into the slot If you have inserted one the name and firmware version will show Navigate to this option and press the OK Button to get to the extended options of the inserted CI Module The option strongly depend on the type of module inserted and therefore will not be explained in detail Refer to the user s manual of your CI Module for additional information on this topic Can decrypt multiple services You can set if your Cl Module can decrypt multiple servi
16. leave all menus and service lists by pressing the EXIT Button Mute Button Pressing the MUTE Button mutes the Volume A crossed speaker symbol will appear on the TV screen Pressing it again or pressing one of the Volume Buttons brings back the audio The Mute Button deletes a character during text input Bouquet Buttons Pressing the Bouquet Buttons will jump back and forth between the bou quets Rewind Button Use the Rewind Button to rewind during playback of a recording PLAY PAUSE Button Use the PLAY Pause Button to pause or resume during playback of a recording or to activate Timeshift Mode Detailed information can be found in Chapter 5 Hard disk operation on page 36 STOP Button Use the STOP Button to stop the playback of a recording or to stop the timeshift mode Fast Forward Button Use the Fast Forward Button to fast forward during playback of a recording TV Button Pressing the TV Button activates the TV Mode RADIO Button Pressing the RADIO Button activates the RADIO Mode TEXT Button The TEXT Button activates the Teletext Record Button Use the Record Button to start an instant recording Detailed information can be found in Chapter 5 3 1 Instant recording on page 40 Important notes about operation All functions of the Dreambox can be controlled via OSD Menu On Screen Display This makes the handling of the Dreambox very easy for you All options are indicated by four colored dots or beams red green yell
17. ode a aaa ds we AS 8 Systeminformation Bol AN ao Bowe yh oe Gee aras HGR bb Se oboe ee eae Eo Get 8 2 About Hard and Software o oo aa ee 9 Updating the software Ol Backing up your setings s sssr we ee ER ERE OOOH KEE Se A 9 a INDIOS TONELADAS es osas CHER HEE EGG EERE EEO EEE Ge GES 9 3 Updating a new So tware aa a Gal is IE 10 Troubleshooting 11 TV Mode setup 12 Technical data 13 Features 14 Contact amp Support Information 68 68 69 70 YO 10 71 71 73 74 11 80 82 Chapter 1 Before initial operation of the receiver 1 1 Safety instructions Please read the safety instructions completely and carefully before using the Dreambox The Manufacturer takes no responsibility for damages as a result of incorrect handling of the Dreambox e Allow enough space around the Dreambox for sufficient ventilation e Do not cover the top of the Dreambox and allow enough space to other devices The louvers of the devices must be free at all times to allow sufficient heat transfer from inside the device e Never put vases or any other liquid filled containers on top of the device Do not expose the device to dripping or splashing liquids e Do not place open flame sources such as lit candles on top of the device e The device may only be operated in moderate climate e Do not remove the cover Risk of electric shock If it is necessary to open the device please contact a tra
18. supports DVB S2 Broadcast Services profile Frequency Range 950 2150 MHz Demodulation DVB S QPSK EN 302 307 Signal Level Input 65 dBm 25 dBm Noise factor 12 dB max DBS Tuner Input Connector F Type female Input Impedance 75 Ohm AFC Capture range 3 MHz Demodulation Shaped QPSK und 8PSK FEC Viterbi and Reed Solomon Viterbirates 1 4 1 3 2 5 1 2 3 5 2 3 3 4 4 5 5 6 8 9 Roll off Factor 35 Common Interface Common Interface Power Consumption max 0 3A 5V Video decoder Video Compression MPEG 2 and MPEG 1 compatible H 246 Videostandard PAL G 25 Hz NTSC Video Formats 4 3 16 9 Letterbox for 4 3 TV Device Audio decoder Audiokompression MPEG 1 amp MPEG 2 Layer I and II MP3 Audio Mode Dual main sub Stereo Frequency 32 kHz 44 1 kHz 48 kHz 16 kHz 22 05 kHz 24 kHz Output analog Output Level L R 0 5 Vss on 600 Ohm THD gt 60 dB 1 kHz Crosstalk lt 65 dB Output digital Output Level 0 5 Vss on 75 Ohm Sampled Data Filtering 32 kHz 44 1 kHz 48 kHz S PDIF Output optical Toslink Output Video Outputlevel FBAS 1 Vss 0 3 dB an 75 Q Teletext after ETS 300 472 Standard Mini USB service connector Function Update of Firmware 18 Ethernet 10 100 1000 MBit s compatible Gigabit Ethernet Port Function Update of Firmware USB USB 2 0 port 2x USB 3 0 port 2x SATA Interface Connector for internal 3 5 Harddisk LNB power and polarisation per tuner LNB Cu
19. the Navigation Buttons AV lt gt to set the Clear before scan option to Yes if you want to delete all services before the scan starts Otherwise leave the setting to No which results in only new services being added to the channel list In order to find the new services follow this steps 1 Press the Navigation Buttons AV to open the channellist 2 Press the green Options Button to access the Satellites view 3 With the Navigation Buttons AV choose the option New and press the OK Button Now you see all new services which were added by the scan The search will only be run once if you are using two tuners of the same type 2x DVB S S2 2x DVB T or 2x DVB C since the service list is the same for both of them It is not necessary to run the search separately for each tuner 65 Service Scan You can see the progress of the scan here ar Hotbird 13 0E 4S DVB S QPSK 10971H 27500 3 4 scan in progress 11 done 252 services found ST Miracle TV Al Forat Disney Channel Cartoon Network Turner Classic Movies Deejay TV Sat 7 Pars Velayat TV Karbala Satellite Channel Al Maaref Service Scan The scan is done once you see this menu It shows how many channels were found during the scan 4 sil 48 scan done 3392 services found _ _ _ _ __ _ _ FR3 ORLEANS FR3 DIJON FR3 POITIERS FR3 REIMS FR3 GRENOBLE FR3 LILLE FR3 STRASBOURG
20. with the letter P are shown 5 With the Navigation Buttons AV choose the service ProSieben and press the OK Button A symbolized padlock will appear in front of the channel letting you know that it can only be watched when the right pincode is entered If you have selected whitelist under the Parental control type then this channel will be the only one that can be viewed without entering the right pincode Change service pin 1 With the Navigation Buttons AW choose the option Change service pin and press the OK Button 2 With the Numeric Keypad enter a 4 digit Pincode You have to enter the new pincode twice to ensure you didn t make any typing errors If you already created a pincode earlier you will be prompted to enter the old pincode and afterwards the new one You will see a notice that the pincode has been changed If the entered pincode was false you will see this notice Press the OK Button to get back into the Change service pin menu and to enter the correct new pincode twice 3 Press the OK Button to get back into the Parental control menu Protecting the parental lock setup Additionally you have the option to protect the parental control menu using a pincode Setting the Protect setup option to yes you will only be able to change parental control setting after you have entered the correct pincode 1 Once you entered the wrong pincode three times in a row
21. you have to wait 15 minutes before you can try again 2 You can use two different pincodes to protect the setup and the service list 39 Chapter 5 Hard disk operation 5 1 Installation Guide This capter describes how to install a 3 5 SATA Hard disk in your Dreambox DM7080 HD Please always adherence to ESD Electrostatic Discharge regulations when handling electronic devices e Make sure that you are grounded e Do not open the device in your living room or in any other rooms with carpeting or any other flooring that can carry an electrostatic charge e Remove all connection from the device e Only open the device with the tools depicted in this manual e Try to avoid direct contact with the main circuit board If all this doesn t mean anything to you or if you have too many question please contact your dealer or technician Also notice the warranty notes in Chapter 1 1 Safety instructions on page 1 36 Opening the device 1 Unscrew the screw s on the left and right side of your Dreambox I UN I UN Remove screw s on the left and right side 2 Remove the screw s on the rear panel marked on the picture in Taiwan USB 3 0 S PDIF HDMI Out HDMI In USB 2 0 Ethernet Service Remove marked screw s on the rear panel 3 Pull the the cover backwards first 1 and lift it afterwards 2 Lift cover off 37 Installation of a 3 5 SATA Hard disk 1 Place the hard disk into the
22. you with the network setup of your Dreambox Detailed information can be found under Chapter 6 6 Network on page 51 16 Chapter 3 Basic operation 3 1 Turning your Dreambox on and off Your Dreambox has an idle mode and an standby mode Both functions differ in their power consumption and the time which is needed until the box has booted e Idle about 1 Second higher power consumption e Standby about 15 seconds less power consumption Idle Mode To put your Dreambox into Idle Mode either press the Standby Button on your remote control or directly on your Dreambox In this mode the OLED Display only shows the current time Standby For putting your Dreambox into Standby Mode there are 3 options 1 Holding down the Standby Button on your remote control for three seconds 2 Press the MENU Button with the Navigation Buttons AW choose the option Standby Restart and press the OK Button With the Navigation Buttons AV choose the option Standby and press the OK Button 3 Alternatively you can push down the Standby Button on your Dreambox for 5 seconds If no OSD Menu is visible on the screen this will also put your dreambox into Standby Mode If the OSD Menu is still open press the EXIT Button All your settings will be saved now and your Dreambox goes into Standby Mode afterwards saves energy In this mode the OLED Display doesn t display anything With the Navigation Buttons AV choose t
23. 3 14 15 15 17 17 18 18 18 19 19 19 20 23 22 26 28 29 4 6 Adding a marker to favorites 4 7 Alternative services 4 8 Parental control Hard disk operation 5 1 Installation Guide 9 2 Management Gal Initialization cae ce Kw isa Da Recording 5 44 202 a a ae eee a 9 3 1 Instant recording 5 3 2 Stop recording 5 3 3 Recording by timer 5 3 4 Timeshift 5 4 Watch a recording Playback 5 5 Setting a marker Bookmarks 5 6 Delete a recording 5 7 Movielist options Setup 6 1 Language 6 2 Customize 6 2 1 0 2 2 6 3 Timezone 6 4 A V Settings 6 5 OLED Display 6 6 Network 6 6 1 Connection via network cable 6 6 2 Integrated wireless WLAN 6 7 Common Interface 6 8 Skin 6 9 Factory reset Service searching 7 1 DVB S2 Tuner Configuration 7 1 1 Single satellite direct connection 7 1 2 Two satellites via Toneburst A B 7 1 3 Two satellites via DiSEqC A B 7 1 4 Four satellites via DiSEqC A B C D 7 1 5 Stab Positioner using USALS 7 1 6 Stab Positioner without USALS 7 1 Tuner B setup 7 2 DVB C Tuner configuration 7 3 DVB T Tuner Configuration TA Automatic scan 3 ceca 48 2a oo 4s iv 36 36 40 40 40 40 Al Al 44 44 45 46 46 48 48 48 48 49 50 50 l l l 93 54 54 313 LO Mannal SOR a
24. A2 Power switch HDMI output LNB input A1 Tuner 5 L r RT 2 0 SS CE ae as PANE S PDIF o et USB 2 0 Senet nic Lund Power connector USB 3 0 2x USB 2 0 SD Card slot port port S PDIF Service connector Power switch The main power switch shuts off power from your Dreambox A IMPORTANT Before opening the device always pull the power plug Power connector Plug the power cable into the main power socket You must not connect the power plug to anything other than a socket that supplies 110V 60Hz or 230V 50Hz 1 x USB 3 0 port The USB 3 0 Port is designed for devices that support the USB 3 0 standard The amount of supported USB devices depends on the installed image Software and is still under development S PDIF optical audio You can connect your Dreambox with an optical Toslink cable to your HiFi Amplifier or DSP The AC3 signal is also available at this port in case the selected channel transmits Dolby Digital signals HDMI Out output You can connect a TV to the HDMI out of your Dreambox if your TV has the right input HDMI In input You can connect your HDMI device with the right output 2 x USB 2 0 port The USB 2 0 Port is designed for devices that support the USB 2 0 standard The amount of supported USB devices depends on the installed image Software and is still under development Network interface The Communication Port is an Ethernet port It is used to communicate
25. AVand lt p and press the green Options Button to save the timer Programming via EPG Change into one of the EPG views in chapter as described in Chapter 3 10 Electronic Program Guide EPG on page 22 By pressing the green Options Button you have the option to automatically add the selected show with its start and end time as a timer All other options are the same as in the manually added timer Press the green Options Button to save the timer You will be taken to the Timer Editor menu 42 EPG Selection ZDF HD Tue Tue Tue Tue Tue Tue Tue Tue Tue Tue Tue Tue Tue Tue Add timer Sort A Z 06 09 11 15 06 09 12 00 06 09 12 15 06 09 13 00 06 09 14 00 06 09 14 15 06 09 15 00 06 09 15 05 06 09 16 00 06 09 16 15 06 09 17 00 06 09 17 15 06 09 17 45 06 09 18 05 SOKO Kitzb hel heute drehscheibe Deutschland ZDF Mittagsmagazin heute in Deutschland Die Kuchenschlacht heute Topfgeldjager heute in Europa Herzflimmern heute Wetter hallo deutschland Leute heute SOKO K ln Timer entry Cancel Name Description Timer Type Repeat Type Date StartTime EndTime Channel After event 1 2 _ ghi4GHI mit B rsenbericht record once 06 September 2011 12 00 12 15 ZDF HD auto abc2ABC def 3DEF JKL5JIKL mno6MNO Tue 06 09 19 00 heute pqrs7PQRS tuv8TUV wxyz9WXYZ lt 0 2 amp gt Choose service which you want to record fill text Timer
26. As an alternative you can press the blue Options Button and select the desired bouquet Afterwards choose a channel with the Navigation Buttons AW The marker will be added above the selected service By pressing the MENU Button the Channellist menu will open up With the Navigation Buttons AV choose the option Add Marker and press the OK Button Use the Numeric Keypad on your remote control to enter the name for the new bouquet The according letters are printed on button The Mute Button deletes a character 32 6 Press the OK Button to add the marker to your favorites list If you have added two markers use the Arrow Left and Arrow Right Buttons to jump between those two markers 4 7 Alternative services In case you are using two different types of tuners in your Dreambox for example a DVB S and a DVB T tuner you can link services that you receive on both tuners in the alternative services list Every services resides on a so called transponder A transponder contains a number of services Example ZDF Transponder via satellite This transponder contains the services 3sat Kika ZDF ZDFdokukanal ZDFinfokanal ZDFtheaterkanal Channel Selection TV Satellites Current Transponder All Satellites Provider Favourites arte HD Herrenkinder Das Erste HD Afrika im Herzen ZDF HD SOKO Kitzbihel Herrenkinder 11 27 11 20 12 15 E arte HD In den Nationalpolitischen Erziehungsanstalten kur
27. Button STOP Button Record Button TEXT Button Battery charge indicator indicates the status of the battery voltage Standby Button The Standby Button switches your Dreambox on and off see Chapter 3 1 Turning your Dreambox on and off on page 17 DREAM Mode Button The DREAM Mode Button switches your remote control into Dreambox con trol mode It will shortly light up once your press the button HELP Button Pressing the HELP Button shows the help menu TV Mode Button The TV Mode Button switches your remote control into TV control mode to control your preprogrammed TV It will shortly light up once your press the button see Chapter 11 TV Mode setup on page 74 Numeric Keypad Enter a service number to directly access the option by using the Numeric Keypad The service numbers are on the left side of the service list The Numeric Keypad can also be used to enter the teletext page number when you are in TV Control Mode and if your TV is teletext capable The TV station has to submit teletext information otherwise this feature cannot be used Arrow Left and Arrow Right Button The Arrow Left and Arrow Right Button enable you to jump back and forth between the last 20 channels you have watched If you have selected a sub service see Chapter 3 6 Sub Services on page 19 you can use these buttons to switch to the next sub service Additionally these buttons can be used to delete characters during text input Options Buttons All pos
28. I cc TIO ond QS an g p e a a DM7080 HD User Manual Digital satellite receiver for free and encrypted Digital Video Broadcasting DVB with optional digital record ing capability HDTV Twin DVB S2 Tuner 2x Dreambox Tuner Slots Gigabit Ethernet Port contrasty OLED Display V3 EAN FR UNIVERSAL SATELLITES En 2x Common Interface 2x Smartcard Reader Dreamcrypt 2x USB 2 0 2x USB 3 0 HDMI 1 4a Dreambox OS Dreambox API Jf EC TIO discover more Foreword Dear customer Congratulations on your new Dreambox DM 7080 HD This manual should assist you to connect your dreambox learning the basic operation and getting to know the additional multiple features Please note that the range of functions expands continiously by new software updates If you updated the software of your dreambox or found some failure in the manual please check if a new version is available in the download section of our website www leontechltd com We hope that you take much pleasure in your new dreambox DM 080 HD The Dreambox DM7080 HD got the C Sign and fulfills all necessary EU Norms DiSEqC is a trademark of EUTELSAT Dolby and the double D symbol are trademarks of Dolby Laboratories HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Changes and printing errors reserved ii Contents 1 Before init
29. With PiP you can display a small TV picture on top of the main big TV picture Double press the blue Options Button to activate Picture in Picture mode VE TE IT IE IT IE 10 212 15 verbunden Sind auch die Schwachen m chtig activated Picture in Picture mode The main TV picture is now additionally displayed as a small PiP in the upper right corner of your screen and the last watched service is displayed in the main big TV picture In PiP mode you will always hear the sound from the main TV picture By pressing the blue Options Button you can choose between the following options Disable Picture in Picture blue Options Button Choose the option to turn the PiP mode off The little PiP will disappear and only the main TV picture is displayed on your screen Move Picture in Picture green Options Button Choose the option to move or resize the small PiP You can move the position of the small PiP by using the Navigation Buttons A Y Use the Bouquet Buttons to resize the small PiP Press the Exit Button to discard your changes or the OK Button to save the settings and return to the current TV show Swap services yellow Options Button Choose the option to swap the main TV picture and the small PiP The small PiP becomes the main TV picture and vice versa 28 3 13 Sleep timer Using the sleep timer you can put your Dreambox into standby or turn it off after a predetermined amount of time
30. able for connecting the hdmi out of your a v receiver to the hdmi input of the tv device HDMI Out 12 2 1 3 Television HDMI Connect the dreambox with the hdmi cable to the T V input of your television At least use the hdmi interface for getting the best picture quality through digital transmission You can use the supplied HDMI cable for connecting the dreambox with the hdmi input of your television HDMI Out 13 2 1 4 Network Connection via network cable Connection via WLAN network oK Sameox WLAN router WLAN USB connector 14 2 2 Turning the device on 1 Place the batteries inside the battery compartment of the remote control keeping in mind the right polarity 2 Plug in the power cable into the Dreambox and then into a 110V 60Hz or 230V 50Hz power socket 3 Now turn on your dreambox If you are using a switchable power socket please shutdown your Dreambox into standby before switching off the power socket Detailed information can be found under Chapter 3 1 Turning your Dreambox on and off on page 17 Please note that the factory setting for the video format is CVBS FBAS 2 3 Start wizard If you switch on your Dreambox for the first time you will see the setup wizard The setup wizard will guide you through the first time installation Follow the in
31. an use the Arrow Left Right Button for switching to the next sub service Pressing the RADIO Button activates the RADIO Mode By pressing the TV or EXIT Button you can quit the RADIO Mode 19 3 8 Subtitles Follow this steps 1 In TV or Radio Mode press the AUDIO Button 2 By pressing the yellow Options Button a list with the available subtitles will show up 3 With the Navigation Buttons AV select a desired subtitle and press the OK Button to activate The screenshot on the left shows you an example of how a subtitle looks Note Keep in mind that not every station offers subtitles If no subtitles are available the subtitle list will stay empty To deactivate subtitles follow this steps 1 In TV or Radio Mode press the AUDIO Button 2 By pressing the yellow Options Button a list with the available subtitles will show up 3 With the Navigation Buttons AV select the activated subtitle and press the OK Button to deactivate 20 3 9 Infobar The Infobar appears when switching a channel and shows all necessary information about the selected service By pressing the OK Button you can open the Infobar if needed Active tuner Signal level Error rate Channel name Current time A gt SNR 12 87 dB BER O J ENIGMA FA IT ET ZA 22 38 ZDF HD 7 22 15 auslandsjournal 6 min N 22 45 ZDFzoom 30 min gt Subservices 2 Extensions Progress bar Current show Next show Remaining time Is hig
32. are stretched to prevent the center from being distorted You will still have a full screen picture AC3 default If a program is transmitted with an AC3 audio track e g Dolby Digital the Dreambox switches automatically to this audio track Volume control of AC3 signals only works if AC3 downmiz is activated Please keep in mind that AC3 downmiz will disable the output of real AC3 signals on every audio out even on the S P DIF output 50 AC3 downmix If you re watching a show with a AC3 audio track it will be changed into a stereo signal Set this option to yes if your have an AV Receiver that does not support Dolby Digital General AC3 Delay With this option you can adjust a delay ofthe AC3 signal This might be helpful if the sound on activated AC3 output is to hear sooner or later than the picture The adjusted value has affect on all channels With the Navigation Buttons you can adjust a delay in 25ms Steps General PCM Delay With this option you can adjust a delay of the PCM signal This might be helpful if the sound on activated AC3 output is to hear sooner or later than the picture The adjusted value has affect on all channels With the Navigation Buttons lt p you can adjust a delay in 25ms Steps Convert AC3 to AC3 You can choose between the following options always The AC3 stream will be always converted to a AC3 stream controlled by HDMI If the connected HDMI device supports th
33. ass tv e Parental control e Sleeptimer e Easy expansion of the base function with the use of Plugins e Remote controllable via Web Interface and streaming of the TV Radio stations to any PC connected to the Dreambox through network 30 e mp3 playback e Skinable OSD in many languages 31 Chapter 14 Contact amp Support Information Headquarter amp Distribution Leontech Limited 10 F North Point Goodview Centre 4 Kam Hong Street North Point Hong Kong Technical Support Dealer s Hotline Dealers only Tel 49 0 180 3 44 11 30 992 Fax 49 0 180 3 44 11 30 993 You can reach the technical support hotline for dealer s from Mo Fr 09 00 am 04 00 pm Technical Hotline Tel 49 0 180 3 44 11 30 990 Fax 49 0 180 3 44 11 30 991 You can reach the technical support hotline from Mo Fr 09 00 am 04 00 pm E Mail support dream property net Website Weblink www leontechltd com Support Forum Weblink www leontechltd com board 82
34. ast Forward Keep in mind that you have to be in the PVR Mode to use these options You can check this by pressing the OK Button The Infobar will reveal and should show the depicted control symbols If they are not shown you simply have to press the PVR Button The infobar mustn t be shown for using the playback functions For leaving playback mode follow this steps 1 Press the STOPP Button 2 You will be asked if you want to stop the replay of the recording If you choose Yes you will be taken back to the last channel you were watching Skipping in a recording Button Time Button Time Button 1 15 sec back Button 3 15 sec forward Button 4 1 min back Button 6 1 min forward Button 7 5 min back Button 9 5 min forward Skip backward Skip forward Spooling in a recording The following speeds for spooling in a recording are available e Forward Fast Forward Button 2x 4x 8x 16x 32x 48x 64x 128x e Back Rewind Button 8x 16x 32x 48x 64x 128x Every press on the button increases the speed by one step 5 5 Setting a marker Bookmarks Fast forward to the point where you want to add a marker and press the 0 on the Numeric Keypad This will set a marker at the desired point The red dashes in the timeline correlate to a marker 45 Infobar Movieplayer with Markers Skip to a marker You can directly skip to a previously set marker during playback Press the Arrow Left Button to ski
35. bar on page 21 During a recording you can watch another service view a previously recorded movie or add an additional recording The number of simultaneous recordings depends on the number of installed tuners and on the number of services residing on a transponder see Chapter 4 7 Alternative services on page 33 It is possible to make up to eight simultaneous recordings Pressing the Up Down Buttons on your remote control activates the service list The recording continues in the background Once a recording is started no matter if manually or by timer see Chapter 5 3 3 Recording by timer on page 41 it will be signaled by a note on the screen If all tuner are used for recording or by the Picture in Picture mode and you are trying to access a service that is not on one of the recorded transponders you will get the No free tuner message 5 3 2 Stop recording Switch to the service which recording you want to stop 1 Press the Record Button 2 With the Navigation Buttons AW choose the option Stop recording and press the OK Button If you have only one active recording it will be stopped immediately If more than one recording is active you will given the choice which recording you want to stop 5 3 3 Recording by timer With the help of a timer you can record shows to your hard disk if you have a hard disk installed You are offered two different ways to program a timer the manual way or via the EPG Ma
36. ces or not Please note that not every CI Module supports this feature Check the instruction manual of your CI Module for information about this feature The Auto option only works with so called Alphacrypt Modules The Exit Button will quit this menu High bitrate support You can set if your Cl Module can process high bitrates 30 000 Please note that not every CI Module supports this feature Check the instruction manual of your CI Module for information about this feature 6 8 Skin 1 Press the Menu Button to open the main OSD menu 94 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option System and press the OK Button 4 With the Navigation Buttons AV choose the option Skin and press the OK Button Choose your Skin Close Default Skin DreamMM HD dTV HD Reloaded Press OK to activate the selected skin Skin Selection The name of the default skin is Default Skin With the Navigation Buttons AW choose your desired skin and press the OK Button To fully activate the skin the system needs to be restarted Use the Navigation Buttons AV to select your desired option and press the OK Button 6 9 Factory reset 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose th
37. cheibe Deutschland hr fernsehen 12 00 12 40 Panda Gorilla amp Co RTL 12 00 14 00 Punkt 12 Das RTL Mittag SAT 1 12 59 14 00 Britt RTL2 12 58 13 59 Privatdetektive im Einsatz ProSieben 12 15 12 42 The Big Bang Theory kabel eins 12 26 12 57 Bill Cosby Show watas 13 20 14 15 Smallville D VIERTE 16 00 16 30 Dauerwerbesendung VOX 11 30 11 50 Prominent zdf_neo 11 30 12 15 Beverly Hills 90210 SIXX 12 05 12 48 Desperate Housewives ANIXE SD 11 50 12 15 Anne mit den roten Haaren General overview of the upcoming programming for the following days Depending on the sta tion up to one week 24 Time Date Input Time Date Input Press the Menu Button in the Multi EPG view Cancel OK Date 06 September 2011 Time 11 22 After you have entered the desired time and date press the A window will appear where you can enter a time and date OK Button to activate your selection Graphical Multi EPG You have another option to view the EPG of different services and successive shows The Graphical Multi EPG displays the EPG overview for the upcoming hours can be set to 1 5 hours with the Buttons 1 5 on the Numeric Keypad for the chosen bouquet To access the Graphical Multi EPG follow this steps 1 Press the blue Options Button or press hold the INFO Button for about 2 seconds 2 With the Navigation Buttons AW choose the option Graphical Multi EPG and press the OK Button Electronic Program Guide
38. e format AC3 the AC3 signal will be forwarded without altering it otherwise the AC3 stream will be converted to a AC3 stream OSD visibility With the Navigation Buttons Y you can change the transparency of the gui Scaler sharpness With the Navigation Buttons lt p gt you can change the sharpness of the screen 6 5 OLED Display 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option System and press the OK Button 4 With the Navigation Buttons AW choose the option Display Setup and press the OK Button Now you can set the brightness of the OLED display for standby and operation mode Operation 1 With the Navigation Buttons AV choose the option Operation 2 With the Navigation Buttons lt p choose the brightness of the OLED Display for operation mode Idle Mode 1 With the Navigation Buttons AV choose the option Idle Mode 2 With the Navigation Buttons lt p choose the brightness of the OLED Display for idle mode 6 6 Network 6 6 1 Connection via network cable Adapter Settings 1 Press the Menu Button to open the main OSD menu ol 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AW choose the option Network and press the OK Button 4 With the Navigation
39. e option Factory Reset and press the OK Button You will be asked if you really want to reset all your settings to the factory defaults If you select yes all your settings and bouquets will be lost Afterwards your Dreambox will be restarted automatically 55 Chapter 7 Service searching In this chapter you will learn how to setup the tuner configuration for the reception with a satellite dish DVB S S2 via cable television DVB C or via digital terrestrial television DVB T in your dreambox and how to perform a service scan 7 1 DVB S2 Tuner Configuration 7 1 1 Single satellite direct connection Use this type of configuration if you want to receive a single satellite with a Single Universal LNB The coax cable is directly connected from your Dreambox to the LNB Reception Settings Configuration Mode simple Mode Single Satellite Astra 19 2E Send DiSEqC no Single satellite direct connection Follow this steps 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option Service searching and press the OK Button 4 With the Navigation Buttons AV choose the option Tuner configuration and press the OK Button 5 With the Navigation Buttons AV choose the option DVB S2 Tuner and press the OK Button 6 With the Navigation Buttons
40. ess the OK Button to save this settings 7 1 7 Tuner B setup The same setup possibilities that applied for Tuner A also apply for Tuner B There are some additional configuration options as described as follows Equal to socket A Use this setting if Tuner B should use the same settings as Tuner A Nothing connected Use this option if no cable is attached to Tuner B Secondary cable from motorized LNB Use this option if you are using a positioner with a Twin or Quad LNB and have 2 cables from the LNB connected to the LNB1 and LNB2 in Tuner A controls the positioner and using Tuner B you can continue watching TV on the same satellite while recording All others are grayed out 7 2 DVB C Tuner configuration Follow this steps 1 2 Press the Menu Button to open the main OSD menu With the Navigation Buttons AV choose the option Setup and press the OK Button 62 Reception Settings Configuration Mode enabled Used service scan type Frequency bands Scan band EU VHF Scan band EU MID Scan band EU VHF Ill Scan band EU UHF IV Scan band EU UHF V Scan band EU SUPER Scan band EU HYPER Scan band US LOW Scan band US MID Scan band US HIGH Scan band US SUPER Scan band US HYPER Scan QAM16 Scan QAM32 DVB C Tuner configuration 3 With the Navigation Buttons AV choose the option Service searching and press the OK Button 4 With the Navigation Buttons AV choose the option Tuner co
41. f kabel eins Alf 2 8 12 55 31 58 The Big Bang Theory ProSieben The Big Bang Theory Recorded files hdd movie All Die Stra en des Terrors 1979 2001 1 2 Today 11 12 Dawsons Creek Today 11 11 Alf 2 8 12 55 The Big Bang Theory 2 8 12 46 Richter Hold 2 8 12 00 Malcolm mittendrin 2 8 11 19 EUReKA Die geheime Stadt 2 8 10 24 vut 16 5 12 00 mobilephon_nbtapvxx mpg 23 2 11 19 Wir haben die Engel auf unserer Seite 1979 1993 0 15 Dokumentarfilm Frankreich 2011 arte HD Zehn Jahre sind seit dem Attentat auf das World Trade Center am 11 September 2001 vergangen doch noch immer steht die Frage im Raum wie es zu diesem Anschlag kommen konnte 484360 MB free diskspace The Big Bang Theory ProSieben The Big Bang Theory 2 8 12 46 26 59 Richter Hold SAT 1 Richter Hold 2 8 12 00 57 59 The Blair Witch Project 2 avi 8 2 11 46 Nicht noch ein Teenie Film 24 1 10 04 Wir haben die Engel auf unserer Seite 1979 1993 0 15 Dokumentarfilm Frankreich 2011 arte HD Zehn Jahre sind seit dem Attentat auf das World Trade Center am 11 September 2001 vergangen doch noch immer steht die Frage im Raum wie es zu diesem Anschlag kommen konnte 484360 MB free diskspace 484360 MB free diskspace List style default with ex List style default tended description List style single line Recorded files hdd movie All Die Stra en des Terrors 1979 2001 1 2 Today 11 12 Wir habe
42. from the All view to be added to the currently selected bouquet Press the Navigation Buttons AV to open the channellist Use the Bouquet Buttons to switch to the desired bouquet to which you want to add channels As an alternative you can press the blue Options Button and select the desired bouquet After that select a service and switch to it by pressing the OK Button By pressing the MENU Button the Channellist menu will open up With the Navigation Buttons AV choose the option enable bouquet edit and press the OK Button the Allview will open up All services that are in the selected bouquet for which you just enabled the option enable bouquet edit are highlighted in red With the Navigation Buttons AV choose a desired service and press the OK Button to select The service will be highlighted red Using this method you can select additional services that you want to add to the bouquet Once you have selected all services that you want to add press the Menu Button The Channellist menu will open up With the Navigation Buttons AW choose the option End bouquet edit and press the OK Button All highlighted services will now be added to the bouquet that you selected in the beginning If you are only using one bouquet which is the default setting the selected services will be added to your favorites list 31 4 4 4 6 Remove a service from favorites
43. g as you have already recorded at least 1 minute long Press the PLAY PAUSE Button again to resume watching This way you won t have to miss anything ever again if you quickly have to catch a phone call The Timeshift Mode can be exited by pressing the Stop Button To ensure the Timeshift Mode is not stopped by accident you will be asked if you want to quit the Timeshift Mode Use the Navigation Buttons AV to select Press the OK Button to activate 5 4 Watch a recording Playback 1 Press the PVR Button to get to the selection of recordings 2 Use the Navigation Buttons AV to select a recording Press the OK Button to start playing it Recorded files All Afrika im Herzen Das Erste HD Spielfilm Deutschland 2008 Today 11 32 0 02 SOKO Kitzbuhel ZDF HD Das Idol Today 11 32 0 23 159711 MB free diskspace List of recordings During replay you can see the control symbols in the Infobar Press the Navigation Buttons AV or press the PVR Button to get back to the list of recordings If you have previously watched the movie you will be asked to continue where you left off when you start watching it the next time If you do not make a selection within 10 seconds the window will disappear and the movie starts from the beginning 44 In PVR Mode the Options Buttons are mapped as described below Rewind Button Rewind PLAY PAUSE Button Pause and Play STOPP Button Stop Fast Forward Button F
44. h the Navigation Buttons AV choose the option Service searching and press the OK Button 4 With the Navigation Buttons AV choose the option Tuner configuration and press the OK Button 5 With the Navigation Buttons AV choose the option DVB S2 Tuner and press the OK Button 6 With the Navigation Buttons AV choose the option Mode 7 With the Navigation Buttons lt p choose the option DiSEqC A B 8 With the Navigation Buttons AV choose the option Port A 58 9 With the Navigation Buttons lt p choose the desired Satellite 10 With the Navigation Buttons AV choose the option Port B 11 With the Navigation Buttons lt p choose the desired Satellite 12 Press the OK Button to save this settings Make sure you know which satellite is connected to which input on the Toneburst switch If you do not find any services in the transponder scan later exchange the two satellites in this list and try again If you have trouble with Tune failed messages please set the Send DiSEqC only on sattelite change and Set voltage and 22KHz to yes 7 1 4 Four satellites via DiSEqC A B C D Use this type of configuration if you want to receive four satellites from one Single Universal or Twin Universal LNB for four or eight parties It does not matter if you use one or two dishes to achieve this In this case the LNBs are connected to a so called Multiswi
45. h the Navigation Buttons AV choose the option System and press the OK Button 4 With the Navigation Buttons AV choose the option Timezone and press the OK Button 5 With the Navigation Buttons lt p choose your timezone and press the OK Button Alternatively press the green Options Button to save the setting or the red Options Button to discard them 6 4 A V Settings 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option System and press the OK Button 4 With the Navigation Buttons AV choose the option A V Settings and press the OK Button Video output This option selects to which output the video signal will be sent to HDMI If you have connected your TV to the HDMI output of your Dreambox set the Output type option to HDMI Modus Use the Navigation Buttons lt p to select the desired screen resolution Display 4 3 content as Display 16 9 content as Pillarbox 4 3 shows will be shown in full height on a 16 9 screen and you will have black bars on both sides Pan amp Scan 4 3 shows will be shown in full width on a 16 9 screen and a bit will be cut off on the top and bottom Just Scale 4 3 shows will be shown in full height on a 16 9 screen and are stretched to fit the width of your Screen Nonlinear Only the outer parts of the picture
46. hard disk cage ensure that the connection port is pointing towards the back of the dreambox Place the hard disk carefully into the plug of the hard disk cage b a Nau PP EA AAA Su Placing hdd to hard disk cage Fig 1 Placing hdd to hard disk cage Fig 2 38 Placing hdd to hard disk cage Fig 3 2 Now you need a Phillips tip screwdriver and four screws for mounting the hdd Tighten the hard disk with the four screws on the left and right side of the hard disk cage see figure 4 Placing hdd to hard disk cage Fig 4 3 Reassamble your Dreambox by following the guide see Chapter 5 1 Opening the device on page 37 backwards 4 Reattach all necessary cables to your Dreambox making sure that you connect the power cord as last Before you can use your hard disk for recordings it has to be initialized by the box as described in Chapter 5 2 1 Initialization on page 40 39 5 2 Management Press the Menu Button to open the main OSD menu With the Navigation Buttons AV choose the option Setup and press the OK Button With the Navigation Buttons AV choose the option System and press the OK Button With the Navigation Buttons AV choose the option Storage devices and press the OK Button By pressing the blue Options Button you enter the Harddisk setup You now can set the duration of time after which the harddisk will be
47. he desired option and press the OK Button Sleep Timer Put your Dreambox into Standby after a duration of time that can be chosen freely See Chapter 3 13 Sleep timer on page 29 Idle Mode Puts your Dreambox into Idle mode Restart Your Dreambox will be rebooted Standby Puts your Dreambox into Standby Mode ir 3 2 Service selection Pressing the Navigation Buttons lt b gt on your Dreambox remote control will take you to the previous or next service Pressing the 0 on the Numeric Keypad will enable you to skip back and forth between the two most recently watched services This feature is quite useful during commercial breaks since it enables you to watch another channel and quickly check if your movies is back on Using the Navigation Buttons lt gt you can switch to the 20 last viewed services 3 3 Changing channel using the service list Channel Selection TV Favourites All Satellites Provider Favourites 1 Das Erste HD Afrika im Herzen 2 ZDF HD Die Rosenheim Cops 3 hr fernsehen service zuhause 4 RTL Television Mitten im Leben 5 SAT 1 Richterin Salesch 6 RTL2 Big Brother 7 ProSieben Scrubs Die Anf nger 8 kabel eins Unsere kleine Farm SB TELES 10 DAS VIERTE Afrika im Herzen 11 11 10 35 12 00 EEE Das Erste HD Afrika im Herzen ist die Fortsetzung des erfolgreichen Dramas F r immer Afrika mit Christine Neubauer und Francis Fulton Smith in den Hauptrollen 3 4 Contr
48. hlighted yellow as soon as a show is broadcasted encrypted Is highlighted yellow as soon as a show is broadcasted in Dolby Digital Is highlighted yellow as soon as a show is broadcasted in 16 9 aspect ratio Is highlighted yellow as soon as a station transmits Teletext information Lights up during the recording process Subservices Extensions Subservices gt Extensions pall 3 10 Electronic Program Guide EPG The Electronic Program Guide EPG shows information regarding the current tv service similar to a TV guide SOKO Kitzbuhel Single EPG Add timer Multi EPG SOKO Kitzb hel Das Idol Nachdem der Ex Skiweltmeister Hartwig Rohracher mit seinem Schneemobil zu Tode gest rzt ist stellt man bald fest dass es Mord war Hat der Mord mit seiner j ngst erworbenen Vermarktungslizenz f r Skirennen zu tun was den bisherigen PR Chef den Job kostete Oder h ngt er mit dem pl tzlichen Freitod seines Pisten Konkurrenten Manfred Zoderer zusammen dessen Vater vielleicht Rache nehmen wollte rztin Dr Regine Furtner liefert Karin und Andreas wertvolle Hinweise Erstsendung 29 01 2003 A D 2002 06 09 11 15 45min EPG Selection Add timer Wed 07 09 06 55 hr fernsehen Wed 07 09 09 05 Das Erste HD Wed 07 09 09 05 Das Erste Wed 07 09 10 35 SWR Fernsehen BW By pressing the INFO Button in TV Mode you are sup plied with detailed information about the current show and by pressing the Navigatio
49. ial operation of the receiver Ll Solty Ve 6 es a ee eee woe aa A Re eae Le FOC ARAS ea ee ee OEE ee ee ee LI Ve Boba ve ee DEREK Eee REE we ea Eee AA AA LL CRU Sen hen AAA AAA Los RO ge a ew Bw we wee Ee oe we oe wwe See Ge 6 tA Rem tec ntrol sasse hem ee REE Sw ER eS we owe dw 2 Start up el SOI ondaa RR He hee HPD HED EE DES RS Es 2 11 Satellite Disk DV B82 2 4 ett we ee Be eee eee ee ee eee eee ex ALS AN DON sesos dr ALG AL gee rara da Eee EDS EE EG Ke ELA RENE oa SEER SEAS AAA AAA A eS eee LIMA TS OSI sc opua crono Oe ABU cera RR ee ee hee AA 3 Basic operation 3 1 Turning your Dreambox on and off De DIVE ee A 3 3 Changing channel using the service list 22 2 CE no nn 34 Controlling th volume ss e 00 0 0 0 0 u 0 nn nn a ta tbe he eee a a ee peo Changing the Audio tak gt s se ew en ee ARA ee en ea A Bee re a ra eee ee A ee ey eek eee ee ee Ree es oe o ETE Oot MAN so rasos ade AAA A ee GS 3 10 Electronic Program Guide EPG sasaaa aaa 3 11 Teletext Videotext ct ee en KE eee EP eee KEES ERE EE wD 3 12 Picture in Picture mode PiP nn Ol Oe ee ee eee eee ee eee Be ee ee Oe ee KES 4 Edit the channellist nl Pee o o ke EAR ee SH EE REEDS DH OSES Be HHS 4 2 Add a service to favorites 22 Cm on ne 4 3 Adding multiple services to a bouquet 2 CE ma nn nn 4 4 Remove a service from favorites a e e 4 5 Moving a service to favorites ce he 2 as essere 111 10 10 10 11 1
50. ill tell you that the sleep timer has been activated 29 Chapter 4 Edit the channellist What is a bouquet A bouquet can be thought of something like a folder Every channel equals a page in this folder and the pages are sorted into categories This way you can create a bouquet called Kids for example under which you file all children s stations Another example would be to create a bouquet called Sports where you put all sports channels This way you can create several topic related bouquets You can delete channels only in the favorites view You cannot delete the channels in the All view The idea of the All view is to keep an internal list of all available stations If you start a new channel search the result would be saved to the All view for example You favorites bouquet will stay untouched This way you can easily add newly found channels from the All list to your favorites bouquet To see how it is done refer to Chapter 4 2 Add a service to favorites on page 31 4 1 Adding a bouquet To be able to add a bouquet you have to set the Allow multiple bouquets option to yes Refer to Chapter 6 2 Customize on page 48 1 Press the Navigation Buttons AV to open the channellist 2 Press the blue Options Button to switch to the bouquet view 3 By pressing the Menu Button the Channellist menu will open up 4 With the Navigation Buttons AV choose
51. ined professional MA A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN e Do not put any metal things into the slots or ventilation openings e The installation of a hard disk Tuner is only allowed by skilled personal or your local dealer Modifications and changes to the Dreambox lead to loss of warranty if not performed and documented by skilled personal We recommend the installation of a hard disk by your local dealer Unskilled installation of a hard disk leads to loss of warranty Shut down e In case your Dreambox is in use for a longer period of time disconnect the power plug from the power outlet e During thunder storm the unit should also be physically disconnected from the power outlet Additional safety instructions e Dis Connecting to a LNB Turn the Dreambox off before you connect or disconnect a cable coming from or going to a LNB e Connection to the cable wall box or terrestrial antenna Before connecting or disconnecting your antenna cable to the Dreambox please turn it off e Connecting to a TV Before connecting or disconnecting your Dreambox to from a TV please turn it off e In case you notice any damage to the power cord or power plug immediately disconnect the device from the power outlet e In case the device was exposed to humidity immediately disconnect the device from the power outlet e In case you notice any serious damage to the outer shell of the device immediately disc
52. ith the Navigation Buttons AW choose the option Mode 7 With the Navigation Buttons lt p choose the option Toneburst A B 8 With the Navigation Buttons AV choose the option Port A ov 9 With the Navigation Buttons lt p choose the desired Satellite 10 With the Navigation Buttons AV choose the option Port B 11 With the Navigation Buttons lt p choose the desired Satellite 12 Press the OK Button to save this settings Make sure you know which satellite is connected to which input on the Toneburst switch If you do not find any services in the transponder scan later exchange the two satellites in this list and try again 7 1 3 Two satellites via DiSEqC A B Use this type of configuration if you want to receive two satellites from one Twin Universal or Quad Uni versal LNB It does not matter if you use one or two dishes to achieve this In this case the LNBs are connected to a so called Multiswitch from which the signal is via coax cabled to the satellite receivers Dreamboxes in your household Reception Settings Configuration Mode simple Mode DiSEqC A B Port A Astra 19 2E Port B Hotbird 13 0E Set Voltage and 22KHz yes Send DiSEqC only on satellite change no Two satellites via DiSEqC A B Follow this steps 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 Wit
53. list menu will open up With the Navigation Buttons AV choose the option End alternatives edit and press the OK Button Parental control Parental control makes it possible to lock selected channels Follow this steps 1 2 3 Press the Menu Button to open the main OSD menu With the Navigation Buttons AV choose the option Setup and press the OK Button With the Navigation Buttons AV choose the option Parental control and press the OK Button Lock a service 1 With the Navigation Buttons AV choose the option Enable parental control and switch to yes with the Navigation Buttons lt p With the Navigation Buttons AW choose the option Parental control type and choose between the options Whitelist and Blacklist with the Navigation Buttons lt gt Whitelist means that all channels NOT in the parental control list will be locked Backlist means that all the channels in the parental control list will be locked With the Navigation Buttons AV choose the option Edit Channellist and press the OK Button Press the Navigation Buttons AV to select the first letter of the channel that you want to lock or allow and press the OK Button 34 In this example we decided to lock the service called ProSieben Accordingly we selected the P as the first letter The Parental control services Editor will open up All services beginning
54. n die Engel auf unserer Seite 1979 1993 arte HD 0 15 Dawsons Creek Today 11 11 Manner zdf_neo 0 37 Alf 2 8 12 55 Alf kabel eins 31 58 The Big Bang Theory 2 8 12 46 The Big Bang Theory ProSieben 26 59 Richter Hold 2 8 12 00 Recorded files hdd movie All Die Stra en des Terrors 1979 2001 1 2 0 15 Today 11 12 arte HD Dawsons Creek 0 37 Today 11 11 zdf_neo Alf 31 58 2 8 12 55 kabel eins The Big Bang Theory 26 59 2 8 12 46 ProSieben Richter Hold 57 59 Richter Hold SAT1 57 59 Malcolm mittendrin 2 8 11 19 Malcolm mittendrin ProSieben 28 58 EUReKA Die geheime Stadt 2 8 10 24 EUReKA Die geheime Stadt ProSieben 25 42 viie AER ann Wir haben die Engel auf unserer Seite 1979 1993 0 15 Dokumentarfilm Frankreich 2011 arte HD Zehn Jahre sind seit dem Attentat auf das World Trade Center am 11 September 2001 vergangen doch noch immer steht die Frage im Raum wie es zu diesem Anschlag kommen konnte 484360 MB free diskspace 2 8 12 00 SAT 1 Malcolm mittendrin 28 58 2 8 11 19 ProSieben EUReKA Die geheime Stadt 25 42 2 8 10 24 ProSieben wit 14 NA Wir haben die Engel auf unserer Seite 1979 1993 0 15 Dokumentarfilm Frankreich 2011 arte HD Zehn Jahre sind seit dem Attentat auf das World Trade Center am 11 September 2001 vergangen doch noch immer steht die Frage im Raum wie es zu diesem Anschlag kommen konnte 484360 MB free diskspace List s
55. nbutton afterwards about the next show Pressing the yellow Options Button activates the Channel EPG see Chapter 3 10 Single EPG on page 23 and pressing the blue Options Button activates the Multi EPG see Chapter 3 10 auf Seite 24 The Dreambox automatically searches for similar broadcasts in the background If one or more similar broadcasts are found the label Similar will appear in the red window Pressing the red Options Button opens a listing of similar broadcasts By pressing the green Options Button you can set a timer for this rerun For additional information about recording by timer please see Chapter 5 3 3 Recording by timer on page 41 22 Single EPG In this view you are supplied with detailed information about the currently selected channel s programming Follow this steps 1 Press the INFO Button 2 Press the yellow Options Button for getting the Single EPG view You can also access this view by pressing 1 Press and hold the INFO Button for about 2 seconds With the Navigation Buttons AV choose the option show single service epg and press the OK Button or 2 Press the Navigation Buttons AV to open the services list With the Navigation Buttons AV choose one channel and then press the Info Button This way you can very quickly and easily access the Single EPG of every service EPG Selection Das Erste HD By pressing the yellow Options Button
56. nfiguration and press the OK Button 5 With the Navigation Buttons AV choose the DVB C Tuner and press the OK Button Frequency bands This type of searching scans the frequencies used by most cable providers This setting is the default 1 With the Navigation Buttons AV choose the option Used service scan type 2 With the Navigation Buttons lt p choose the option Frequency bands 3 Press the OK Button to save this settings Frequency steps This type of searching scans the set frequencies step by step in a set increment 1 With the Navigation Buttons AV choose the option Used service scan type 2 With the Navigation Buttons lt p choose the option Frequency Steps 3 With the Navigation Buttons AV choose the option Frequency scan step size kHz 4 Use the Numeric Keypad to set the step increment 5 Press the OK Button to save this settings The same setup possibilities apply if you are using a second DVB C tuner in your Dreambox see Chapter 7 2 DVB C Tuner configuration on page 62 63 Reception Settings Configuration Mode enabled Terrestrial provider Europe Middle East Africa DVB T Frequencies Enable 5V for active antenna off DVB T Tuner Configuration 7 3 DVB T Tuner Configuration Follow this steps 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button
57. not to be put into the regular garbage 1 2 Packaging contents Please check the completeness of the box s contents Dreambox DM7080 HD Remote control Fig similar Power cord Screws for attachment of HDD BE nn Quickguide Sa USB WIFI Stick Fig lar simi 1 3 Views 1 3 1 Front view IR sensor Channel up down Status LED T 2x Cl slot USB 3 0 port 2x Smartcard Reader Dreamcrypt OLED display Standby button 2 x Cl slot You can insert a Cl Module of your choice in one of the CI Slots In order to remove the ci module use the eject button on the right side of the CI Slot 2 x Smartcard Reader Dreamcrypt Insert your Dreamcrypt Smartcard with the golden chip facing down and forward into one of the two Smartcard reader slots USB 3 0 Port The USB 3 0 port is meant to connect USB 3 0 compliant devices The extend of the supported devices depends on the software and is always under further development Channel up down Using the channel up and down buttons you can switch the channels directly on your Dreambox OLED display The OLED Display shows all major information IR sensor The remote control sensor receives the infrared signals of the Dream Remote Control Status LED The Status LED indicates the Standby Status of your Dreambox Standby button The Standby Button switches your Dreambox on and off 1 3 2 Rear view Network interface HDMI input LNB input
58. nual programming 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Timer and press the OK Button 3 Press the green Options Button to add a new timer 41 Timer entry Cancel Name Description Timer Type record Repeat Type once Date 06 September 2011 StartTime 10 35 EndTime 12 00 Channel Das Erste HD After event auto EY Fo abc2ABC def 3DEF ghi4GHI jKL5IKL mno6MNO pars 7PQRS tuv8TUV wxyz9WXYZ lt 0 7 amp gt Add Timer You can choose between two different timer types Record to record the desired show or Zap to automatically switch to the service As repeat type you can choose between once and repeated The repeat type repeated offers you the following options e daily e weekly with choice of weekday Monday through Friday e user defined for each day from Monday through Sunday For all four options you can set a date for the first execution of the timer You can decide what should happen after the recording finishes by selecting the After event option You can choose between auto to keep your Dreambox in the same state as before the recording do nothing to keep your Dreambox turned on after the recording go to idle mode to put your Dreambox into idle mode go to standby to shutdown your Dreambox once the timer is done Set your desired option by pressing the Navigation Buttons
59. olling the volume Pressing the Navigation Buttons AV activates the ser vice list With the Navigation Buttons AV choose the desired service and press the OK Button The Volume Buttons control the volume of the audio Pressing will make turn it up and pressing will turn it down Pressing the MUTE Button mutes the volume A crossed speaker symbol will appear on the screen 18 3 5 Changing the audio track Pressing the AUDIO Button in TV or Radio Mode Select audio track AC3 downmix Channel Menu 0 1 on stereo audio tracks deutsch Running dolby digital 3 6 Sub Services Use the Navigation Buttons AV to move to desired au dio track Press the OK Button to select The contents of this menu will vary from service to service AC3 Downmix Press the red Options Button to toggle AC3 Downmix See Chapter 6 4 A V Settings on page 50 on and off The green dot on the left side of Sub Services in the Infobar appears if the selected station transmits sub Services Input Please select a subservice Quickzap Add to favourites Sky Select 7 456 09 30 2 437 11 30 443 11 00 436 10 30 436 11 15 e 413 11 30 3 7 TV Radio switching Pressing the green Options Button in TV or Radio mode will reveal the sub services menu With the Navigation Buttons AY choose one of the sub services then press the OK Button to select You c
60. on Button it s getting brighter Transparency Here you can adjust the transparency value of your Teletext Press the Navigation Buttons lt p gt to adjust the alpha value Text level Press the Navigation Buttons lt p gt to choose one of the following supported TeleText Versions 1 0 1 5 2 5 3 5 Region Press the Navigation Buttons to choose the character set for your region Position and size Enter values for left top right bottom with the Numeric Keypad or press the TEXT Button for visual movement of the Tele Text and changing the size In graphical mode you can adjust the height by pressing the Bouquet Button and the width by pressing the Volume Taste With the Navigation Buttons A Y 4 you can move the TeleText on the screen Display edges Show first and last column Splitting Mode Choose mode for splitted screen view Picture and TeleText TV picture on the left and Tele Text on the right side of your TV TeleText and Picutre TeleText on the left and TV picture on the right side of your TV TeleText in Bild TeleText will be shown as small picture in graphics pig Position and size see Position and size Background caching If you switch off background caching searching for the page will not start before you entered the last number Debug Debug messages are saved to tmp dbttcp log 27 3 12 Picture in Picture mode PiP The Dreambox has a so called PiP Function
61. onnect the device from the power outlet e Do not expose the Dreambox to direct sunlight lightning or rain e Grounding The LNB cable must be grounded The grounding system must meet SABS 061 requirements e Cleaning Disconnect the mains power cord before cleaning the cover Use a slightly damp cloth without cleaning agents e Connect the Dreambox only to suitable sockets Do not allow overloads to occur e Please be careful that the batteries of your remote control are not exposed to heat since they might explode Disposal instructions The packaging of the Dreambox only consists of reusable materials Please recycle if possible This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment For more information about where you can drop off your waste equipment for recycling please contact your local city office your household waste disposal service or the shop where you purchased the product Please note that empty batteries and electric waste is
62. ow blue in the OSD Menu and can be started with the Option Buttons on the Remote Control Depending on the chosen Menu these options do vary In general the menus are controlled using the Navigation Buttons peo EN Q AY B on your remote control To get into a submenu you have to press the OK Button All Menus and Service lists are closed with the EXIT Button Chapter 2 Start up 2 1 Connecting Before using the Dreambox please read the safety instructions under Chapter 1 1 Safety instructions on page 1 In the following is described how to connect the dreambox to a Satellite dish a cable connection a terrestrial connection an a v receiver a tv device and a network 2 1 1 Satellite Dish DVB S S2 Connect the LNB with a suitable coax cable to the LNB Input of your Dreambox Detailed information can be found under Chapter 1 3 2 Rear view on page 5 T ner A2 Al a 10 2 1 2 A V Receiver Connection via optical fiber cable If your a v receiver amplifier has a suitable optcial S PDIF Input connect the connection jack S PDIF OPTICAL at the Dreambox with an optical fiber cable toslink with the optcial S PDIF Input of your amplifier 11 Connection via HDMI cable Use an hdmi cable to connect the hdmi out of your dreambox to an hdmi input of the a v receiver After that take a second hdmi c
63. p to the previous marker and press the Arrow Right Button to skip to the next marker To delete a marker skip to it as described above and press the O on the Numeric Keypad 5 6 Delete a recording 1 Press PVR Button to get to the selection of recordings 2 With the Navigation Buttons AV choose a recording and press the Menu Button 3 With the Navigation Buttons AW choose the option delete and press the OK Button You will be asked if you want to delete the recording As a control feature the name of the recording is displayed as well Choose Yes and you will be taken back to the selection of recordings 5 7 Movielist options Follow this steps 1 Press the PVR Button to access the Movielist 2 Press the Menu Button Sorting options You have the choice between two different sorting options 1 Alphabetic sort 2 Sort by date 46 List styles You have the choice between different list styles Recorded files hdd movie All Die Stra en des Terrors 1979 2001 1 arte HD Wir haben die Engel auf unserer Seite 1979 1993 Dokumentarfilm F Today 11 12 0 15 Dawsons Creek zdf_neo M nner Today 11 11 0 37 Alf kabel eins Alf 2 8 12 55 31 58 Recorded files hdd movie All Die Stra en des Terrors 1979 2001 1 arte HD Wir haben die Engel auf unserer Seite 1979 1993 Dokumentarfilm F Today 11 12 0 15 Dawsons Creek zdf_neo M nner Today 11 11 0 37 Al
64. put into standby mode You can select from No standby 10 or 30 Seconds 1 2 5 10 20 or 30 Minutes 1 2 or 4 Hours Once you have selected the desired time press the OK Button or the green Options Button to get back into the harddisk menu 5 2 1 Initialization 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option System and press the OK Button 4 With the Navigation Buttons A Y choose the option Storage devices and press the OK Button 5 With the Navigation Buttons AV choose your harddisk If you have installed another hard disk this option will differ from the one depicted 6 By pressing the red Options Button you will initialize format the hard disk After you confirm the safety question the initialization process starts A 111 WARNING All data stored on the HDD will be lost 5 3 Recording 5 3 1 Instant recording Press the Record Button You have five available options 40 1 Add recording indefinitely 2 Add recording stop after current event 3 Add recording enter recording duration 4 Add recording enter recording endtime 5 Don t record Use the up down Buttons to navigate to your desired selection and press the OK Button to select A ongoing recording is indicated by a flashing symbol in the Infobar see Chapter 3 9 Info
65. r a recording Margin after record Set the desired lag in minutes for a recording Show blinking clock in display during recording Select wether you want the time in the OLED Display to blink during a recording or not 48 Infobar timeout Set the desired time after which you want the Infobar to disappear You can choose between one and ten seconds or no timeout Show event progress in channel selection Show progress bar for each event in channel list 6 2 2 Intermediate mode These settings supplement the settings in simple mode Automatic wakeup from standby for zap timers If this option is set to Yes your Dreambox will wakeup from standby even for zap timers and not only for recordings Recordings always have priority If this option is set to Yes your Dreambox will automatically switch to the service which is supposed to be recorded in case there is a conflict with an existing timer If you set this option to No you will be asked if you want to switch to the service which is supposed to be recorded Text subtitle presentation You can choose between the options black box or drop shadow Show positioner movement If you own a satellite dish with a positioner you can see a flashing symbol of a satellite dish on your screen if you set this option to yes Enable multi bouquets Set this option to Yes if you want to use multiple bouquets Multi EPG bouquet selection Enable thi
66. rol your tv device Duration of lighting of the Dreambox Symbol You can adjust in seconds the duration of how long the dreambox symbol at the bottom is lit up after you once pressed a button on the rcu 1 Press the OK Button and the DREAM Mode Button for 3 seconds The DREAM Mode Button flashes 3 times 2 Press one of the keys 0 9 on the Numeric Keypad 0 means off 1 9 means the time in seconds Factory reset To reset the remote control to the factory defaults follow these steps 1 Press the TV Mode Button and the OK Button until the TV Mode Button lights up 2 Press 999 on the Numeric Keypad 76 Chapter 12 Technical data e Dreambox OS e Dreambox API e 7000 DMIPS Dual Core Processor e MPEG2 H 264 Hardware decoding DVB compliant e 2x Smartcard Reader Dreamcrypt e 2x DVB Common Interface e 2x HDMI 1 4a 1x Input 1x Output e 10 100 1000 MBit s compatible Gigabit Ethernet Port e Internal SATA Connector Support for all regular hard disks 2 5 and 3 5 SATA e 2x USB 2 0 port 2x rear e 2x USB 3 0 High Speed port 1x front 1x rear e SD Card Reader e Mini USB Service Port e OLED Display e Twin DVB 52 Tuner e 2x Plug amp Play Tuner slots for optional tuners e 2 GByte RAM e 4 GByte Flash e S P DIF e EPG support Electronic Program Guide e Integrated Teletext e Support for DiSEqC 1 0 1 1 1 2 and USALS e Multi Language OSD 17 Additional info DVB S2 Tuner
67. rrent 500mA max short circuit proof LNB Voltage vertical lt 14V without load gt 11 5V at 400mA LNB Voltage horizontal lt 20V without load gt 17 3V at 400mA LNB shut off at Standby Mode Count of active satellite position DiSEqC 1 0 1 1 1 2 and USALS Rotor Control OLED Display The colored OLED display has an expected lifetime up to 55 000 hours at 50 brightness and 25 C ambient temperature Input voltage 110 230V 50 60 Hz AC voltage 15 Physical specification Ambient Temperature 15 C 35 C Humidity lt 80 Size W x D x H 372 mm x 232 mm x 75 mm 19 Chapter 13 Features e Single EPG Electronic Program Guide sortable by date or alphabetically e Automatic search for additional air dates of a show and easy recording them by timer e Multi EPG graphically and text based e up to 8 simultaneous recording 4 for each Transponder e Timeshift e List of recordings sortable by date or alphabetically and free choice of different views e Timer programming manually or by EPG e Individually configurable timers e g single or recurring timers e DiSEqC 1 0 1 1 1 2 and USALS e Channel change in less than a second e Start wizard for initial setup e Pre installed service list for DVB S e unlimited channellist for TV Radio e Support of favorite lists e full automatic channel scan e DVB Teletext subtitle e Integrated Teletext with level 2 5 support e Radiotext RaSS Infos at www r
68. s option if you want to be able to choose the bouquet before the Multi EPG is displayed EPG cache time span You can choose how many days in the future the EPG should be cached Available options 7 14 21 28 days Change bouquets in quickzap If this option is set to Yes you will automatically be taken to the next bouquet while changing channels once you have reached the end of one bouquet Alternative radio mode Set this option to Yes if you want the handling in the Radio mode to be the same as in the TV mode Action on long powerbutton press Set your desired option what is supposed to happen if you push the Standby Button for a few seconds The possible options are show shutdown menu and imme diate shutdown Action on short powerbutton press Set your desired option what is supposed to happen if you push the Standby Button shortly The possible options are show shutdown menu immediate shut down and standby Position of finished Timers in Timerlist You can choose the position of finished timers in the Timerlist overview Available options at end or at beginning Use legacy virtual subservices detection In normal case not needed just for some broken cable providers Please try the normal mode first 49 6 3 Timezone 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 Wit
69. sible options are shown by the four colored dots blocks red green yellow blue and can be activated by the Options Buttons Depending on the menu you currently are in the options will change and will be named differently INFO Button If no OSD menu is visible on the screen and you are in TV or RADIO Mode pressing the INFO Button will reveal the EPG information of the chose channel if it is available MENU Button If you are in TV or RADIO Mode pressing this button will bring up the OSD main menu The OSD main menu has the following options You can switch to the needed option by pressing the Navigation Buttons AV If you are in the service list pressing the MENU Button brings up the service menu The shown options may vary depending on the service list you selected Navigation Buttons In general the menus are controlled using the Navigation Buttons on your remote control To get into a submenu you have to press the OK Button OK Button By pressing the OK Button you confirm a selection in the menu or service list navigation If no OSD menu is present on your screen the infobar is shown once you press the OK Button AUDIO Button Pressing the AUDIO Button gives an overview of the provided audio tracks PVR Button Pressing the VIDEO Button shows the list of recordings Volume Buttons The Volume Buttons control the volume of the audio Pressing will make turn it up and pressing will turn it down EXIT Button You can
70. structions on the screen and use the Navigation Buttons AV and the OK Button With the red Options Button you can choose the desired language English Video mode selection Please pre see this page on your TV el ors ss OK if you can ect a different video mode The next video mode will be automatically probed in 20 d Video output selection You will be shown different video output modes for roughly 20 seconds after you have connected and switched on your Dreambox Once you see a clear picture on your TV screen press the OK Button to select it If you prefer a different output than the selected one you can use the Navigation Buttons AV and the OK Button to select it Language selection With the Navigation Buttons AV choose your desired language and confirm with the OK Button Tuner Detailed information about the tuner setup can be found in chapter 7 1 DVB S2 Tuner Configuration on page 56 15 Default services list Service scan Depending on your tuner configuration in the previous step you might be offered to install default services lists Otherwise you will be asked to perform a service scan Detailed information about the service scan can be found in Chapter 7 4 Automatic scan on page 64 Parental Control Parental control makes it possible to lock selected channels Detailed information can be found under Chapter 4 8 Parental control on page 34 Network The network wizard will assist
71. tch from which the signal is via coax cabled to the satellite receivers Dreamboxes in your household Reception Settings Configuration Mode simple Mode DiSEqC A B C D Port A Astra 19 2E Port B Hotbird 13 0E Port C nothing connected Port D nothing connected Set Voltage and 22KHz yes Send DiSEqC only on satellite change no Four satellites via DiSEqC A B C D Follow this steps 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option Service searching and press the OK Button 4 With the Navigation Buttons AV choose the option Tuner configuration and press the OK Button 5 With the Navigation Buttons AV choose the option DVB S2 Tuner and press the OK Button 6 With the Navigation Buttons AV choose the option Mode 99 7 With the Navigation Buttons lt p choose the option DiSEqC A B C D 8 With the Navigation Buttons AV choose the option Port A 9 With the Navigation Buttons lt p choose the desired Satellite 10 With the Navigation Buttons AV choose the option Port B 11 With the Navigation Buttons lt p choose the desired Satellite 12 With the Navigation Buttons AV choose the option Port C 13 With the Navigation Buttons lt p choose the desired Satellite 14 With the Naviga
72. teps 1 Press the MENU Button in order to open the main menu 2 Navigate to the option Information and press the OK Button The Information menu will open up 3 Navigate to the option Service and press the OK Button Press one of the four Options Buttons to get the following information red Serviceinfo green PIDs yellow Transponder blue Tuner status 68 8 2 About Hard and Software This window shows all relevant information about the Hard and Software of your Dreambox ber Dreambox OS 2014 09 30 detached from Image Experimental 2014 09 27 Frontprozessor Version 1 Erkannte Tuner Tuner A1 BCM4506 DVB S2 Tuner A2 BCM4506 DVB S2 Tuner B BCM4505 DVB S2 Tuner C CXD1981 DVB T Erkannte Festplatte ATA SAMSUNG HD502HI 500 1 GB 9867 MB frei Aktuelle IP Adresse 192 168 0 129 Wired y lt am y y Do ann um au discover more Hardware and Software Information Follow this steps 1 Press the MENU Button in order to open the main menu 2 Navigate to the option Information and press the OK Button The Information menu will open up 3 Navigate to the option About and press the OK Button 69 Chapter 9 Updating the software 9 1 Backing up your settings Before installing newer software on your Dreambox you should backup your settings otherwise they will be lost 1 2 3 9 2 Press the Menu But
73. the option add bouquet and press the OK Button 5 Use the Numeric Keypad on your remote control to enter the name for the new bouquet The according letters are printed on button The Mute Button deletes a character 6 Press the OK Button to add the new bouquet to your favorites list You will be taken back to the Channellist menu 30 4 2 Add a service to favorites If you want to add a service to your Favorites view you can choose from services in the All Satellites and Provider views You can switch views by pressing the red green yellow and blue Options Buttons At this point we only describe the process from the All Bouquet since it is the same for the others 4 3 Press the Navigation Buttons AV to open the channellist Press the red Options Button to switch to the All view With the Navigation Buttons AV choose the MENU Button to open the Channellist menu With the Navigation Buttons AW choose the option add service to bouquet and press the OK Button If you are using more than one bouquet this option is named add service to bouquet instead and you will get a list of your bouquets afterwards You can choose to which bouquet you want to add the currently selected service If you are using only one bouquet which is the factory default the service will be added to your favorites list Adding multiple services to a bouquet You can select multiple services
74. this steps 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option Service searching and press the OK Button 61 10 11 12 13 14 15 16 17 18 With the Navigation Buttons AV choose the option Tuner configuration and press the OK Button With the Navigation Buttons A Y choose the option DVB S2 Tuner and press the OK Button With the Navigation Buttons AV choose the option Configuration With the Navigation Buttons lt p choose the option Extended With the Navigation Buttons AW choose the option Satellite With the Navigation Buttons lt p choose the desired Satellite With the Navigation Buttons AV choose the option LNB Press the Navigation Button With the Navigation Buttons AV choose the option DiSEqC Modus With the Navigation Buttons lt p choose the option 1 2 With the Navigation Buttons AV choose the option Use usals for this sat With the Navigation Buttons lt p choose the option No With the Navigation Buttons AV choose the option Stored position Enter position of the selected satellite which is saved in the positioner by using the Numeric Keypad Refer to the instruction manual of your positioner for the number of the saved position Pr
75. tion Buttons AV choose the option Port D 15 With the Navigation Buttons lt p choose the desired Satellite 16 Press the OK Button to save this settings Make sure you know which satellite is connected to which input on the Toneburst switch If you do not find any services in the transponder scan later exchange the mentioned satellites in this list and try again 7 1 5 Stab Positioner using USALS Use this type of configuration if you want to receive many satellites with a Stab positioner from a Single Universal LNB The coax cable is directly connected from your Dreambox to the LNB Reception Settings Configuration Mode simple Mode Positioner Longitude 005 100 East Latitude 050 767 North Use Power Measurement yes Power threshold in mA 050 Rotor turning speed Fast Stab Positioner using USALS This menu is meant for a Stab positioner You only have to enter the geographical details of your residence At http www heavens above com you can find the coordinates of your residence The rest is done automatically by your Dreambox with build in USALS USALS is a model for calculating the position of all satellites in orbit with a margin of error less than 0 1 degrees USALS was developed by the Stab company Everything is done automatically and does not require any technical know how Follow this steps 1 Press the Menu Button to open the main OSD menu 60 2 With the Navigation Buttons AV
76. tions of the keys of your tv remote control unit can be adopted to the dreambox rcu one on one Only the DREAM and the TV Mode Button couldn t be programmed 1 Press the OK Button and the TV Mode Button for 3 seconds 2 Enter 888 with the Numeric Keypad in order to start the Learning function 3 Press the desired button on the dreambox rcu except the DREAM and the TV Mode Button which you want to program A Place the dreambox rcu and the tv device rcu towards each other at a distance of 3 5 cm Remote control of your TV 3 5cm 1 u _ 2 DRA Dreambox remote control 5 Press the desired button on the tv device rcu for 2 3 seconds Release this button it is now pro grammed 19 6 If you want to program another Button or you made a mistake during programming just repeat this process starting from step 3 i If no code is entered within 6 seconds or the TV Mode Button is pressed the remote control will exit the programming mode automatically Dreambox Mode and TV Mode Dreambox Modus Press the DREAM Mode Button in order to activate the Dreambox Mode in your rcu Use the two DIP Switches in the battery compartment on the back if you are going to use more than one dreambox in a single room TV Mode By pressing the TV Mode Button the remote control unit switches to the tv mode and the last stored rcu code is used Now you can use the dreambox rcu instead of the tv device rcu in order to cont
77. ton to open the main OSD menu With the Navigation Buttons AV choose the option Setup and press the OK Button With the Navigation Buttons AV choose the option Software management and press the OK Button With the Navigation Buttons AV choose the option Backup system settings and press the OK Button Restoring your settings Press the Menu Button to open the main OSD menu With the Navigation Buttons AV choose the option Setup and press the OK Button With the Navigation Buttons AV choose the option Software management and press the OK Button With the Navigation Buttons AW choose the option Restore system settings and press the OK Button 10 9 3 Updating a new software 9 3 1 With browser Requirements e PC with browser like Firefox Opera Internet Explorer e latest Software for your Dreambox downloadable under www leontechltd com e 1 networkcable e DHCP Server If you connect your dreambox directly to the pc you need a Cross Over networkcable if you connect your Dreambox to a switch hub router you need a common networkcable a so called patchcable If your dreambox will not start anymore you are able to get running again with the help of the so called Rescue Loader The following steps assume you have a DHCP server Usually dhcp server is activated by default in delivery condition of your router First of all power down the Dreambo
78. tyle compact with de List style compact scription 47 Chapter 6 Setup 6 1 Language 1 If no OSD menu is visible on your screen press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AV choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option System and press the OK Button 4 With the Navigation Buttons AW choose the option Language and press the OK Button 5 With the Navigation Buttons AV choose your desired language and press the OK Button in order to activate 6 2 Customize 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AW choose the option Setup and press the OK Button 3 With the Navigation Buttons AV choose the option System and press the OK Button 4 With the Navigation Buttons AV choose the option Customize and press the OK Button Setup modes There are three different user modes Simple Intermediate and Expert This gives you the possibility to set the level of options to your needs Intermediate is the default setting We will not explain the expert mode in detail in this manual 6 2 1 Simple Mode Shutdown when no button has been pressed for Set dreambox into standby mode when no button has been pressed for a configured time You can choose between 1 5 hours or disable this feature Margin before record in Minutes Set the desired forerun in minutes fo
79. with your Dreambox via HTTP FTP NFS Telnet SSH and Samba to access your recorded movies to upload channel lists etc This port is also used to update the operating system of your Dreambox Please use a regular patch cable to connect your Dreambox to your LAN Service connector The Service port is used to update the operating system Please connect a mini usb to usb cable here SD Card Reader Put your SD card e g from your digital camera in here DVB S2 Tuner onboard Sat Tuner Al Connect the coaxial cable from your LNB here Sat Tuner A2 Connect the second coaxial cable from your LNB here If you do not have a second cable from your LNB you have the possibility to connect Sat Tuner Al and Sat Tuner A2 with the help of the settings menu see chapter 7 1 7 Tuner B setup on page 62 You don t need an external connection cable for that Optionally you have more channels to choose from for parallel recordings Tuner Slot B for optional tuners Tuner Slot C for optional tuners 1 4 Remote control Battery charge indicator HELP Button DREAM Mode Button DRAMM PHELP GERAD Numeric Keypad Arrow Left Button Options Buttons INFO Button Navigation Buttons AUDIO Button Volume Buttons Mute Button Rewind Button PLAY PAUSE Button TV Button RADIO Button Standby Button TV Mode Button Arrow Right Button MENU Button OK Button PVR Button EXIT Button Bouquet Buttons Fast Forward
80. x to standby and then switch it off by the power switch on the back Idle mode is not enough Follow these steps 1 Press the Menu Button to open the main OSD menu 2 With the Navigation Buttons AW choose the menu Standby Restart and press the OK Button 3 With the Navigation Buttons AV choose the option Standby and press the OK Button 4 Please wait until your dreambox is in standby mode 5 Press and hold the Standby Button at the frontpanel 6 The text Enter setup should appear in the OLED display 7 After a few seconds the text http dm7080 or alternatively an IP Adress e g http 192 168 0 80 should appear in the OLED Display If you still see DHCP instead of the above mentioned ad dresses the box still searches for a dhcp server in your network Please wait a few seconds If there is no ip address after about 30 seconds check your dhcp server settings and the cabling of your network gt 8 You can release the Standby Button now Your dreambox is now in Maintenance mode In maintenance mode the Rescue Loader of your dreambox offers the following functions e Online Recovery The latest available software will be downloaded from the Internet and directly installed e Show Information about the hardware 71 e Install new software e Backup your dreambox Now open a browser on your PC Firefox Opera Internet Explorer 1 Enter the address from the
81. y Dish is too small Realign dish Install larger dish An obstacle between dish and satel lite e g house or tree Dish aligned incorrectly or faulty Channel is transmitted in a new slot Reposition dish so it has a clear view towards the satellite Check dish Start service scan see chapter 11 The transmission of the channel was terminated Hard disk is full Batteries are inserted incorrectly Batteries are empty Delete no longer needed recordings Remove batteries and check polar ity Insert new batteries Wrong remote control mode Dream Mode TV Mode Software is not reacting Dreambox is locked up 13 Press Dream Mode or TV Mode button Reboot Dreambox Reboot Dreambox Chapter 11 TV Mode setup With the Dreambox remote control you have the possibility to control the dreambox and your tv device with only one remote control In order that your tv device reacts to the signals of the remote control you have to program it before There are 3 options for programming the rcu 1 Programming with Code 2 Programming by Learning function 3 Programming by Scan function Please read the steps of each programming method carefully before you proceed Programming with Code In this programming method a manufacturer specific code is used refer to device list on www leontechltd com 1 Press the OK Button and the TV Mode Button for 3 seconds
82. you can either Ta sort the Single EPG alphabetically or by time Tue 06 09 10 35 Afrika im Herzen Tue 06 09 12 00 heute Tue 06 09 12 15 ARD Buffet By pressing the lt or gt button you Can switch to EPG Tue 06 09 13 00 ZDF Mittagsmagazin Tue 06 09 14 00 Tagesschau Tue 06 09 14 10 Rote Rosen Tue 06 09 15 00 Tagesschau Tue 06 09 15 10 Sturm der Liebe Tue 06 09 16 00 Tagesschau Tue 06 09 16 10 Panda Gorilla amp Co Tue 06 09 17 00 Tagesschau Tue 06 09 17 15 Brisant Tue 06 09 18 00 Verbotene Liebe Tue 06 09 18 50 Gro stadtrevier Tue 06 09 19 45 Wissen vor 8 of the previous or next service 23 Multi EPG Follow this steps 1 Press the Info Button 2 Press the blue Options Button for switching to Multi EPG view Use the blue and yellow Options Buttons to switch between the now next and more views Pressing the green Options Button will give you the possibility to automatically copy the start and end time of the selected show into a recording timer EPG Selection Zap Add timer Prev Next NOW NEXT 2 MORE Das Erste HD WIN J Afrika im Herzen ZDF HD MW 7 SOKO Kitzb hel hr fernsehen WI service zuhause RTL MONA Mitten im Leben SAT 1 WE 1 Richterin Salesch RTL2 WE 1 0BigBrother ProSieben E J Malcolm mittendrin kabel eins EA kleine Farm TELES WIN Homeshopping D VIERTE WM _ 1 DAS VIERTE Lebensberatu VOX MUA Gilmore Girls zdf_neo Dawsons Creek
83. z Napola und den Adolf Hitler Schulen sollte w hrend des Dritten Reiches die Elite des Landes und ein ganz neuer Mensch herangebildet werden Services of ZDF Transponder If you now start a recording or enable the PiP function on ZDF only the services on the same transponder on this tuner are available any more The unavailable services will be marked grey in the services list once a service on one of the tuners is in use either by recording or by PiP see Chapter3 12 Picture in Picture mode PiP on page 28 If you now want to view or record a different service that is not on the ZDF Transponder it has to be linked to the corresponding service on the free other tuner 33 How to link services will be explained in the following steps 4 8 Press the Navigation Buttons AV to open the channellist With the Navigation Buttons AV choose the service for which you want to add an Alternative By pressing the MENU Button the Channellist menu will open up With the Navigation Buttons AV choose the option Add alternatives and press the OK Button The All view opens up With the Navigation Buttons AV choose the service for which the Alternative should be added and press the OK Button The service will be highlighted in red Using this method you can select additional services that you want to add Once you have selected all services that you want to add press the Menu Button The Channel

User manual - Dream Multimedia

Contents

Download Pdf Manuals

Related Search

Related Contents