User Manual ELS Premium - Smart
Contents
1. During the ticking you must hold the programming card against the card reader panel until a confirmation signal is audible gt The programming card is now stored Note When using a new programming card the memory will be erased long signal 2 Store data carrier hold the stored program card once against the card reader panel A ticking is audible for approx 7 seconds During the ticking hold the data carrier key fob against the card reader panel to read it in until a confirmation signal is sounded 2 x 3 short beeps gt The data carrier is now stored 3 Check data carrier for function hold the data carrier once against the card reader panel gt The confirmation signal is sounded again the latch moves back and the lock opens Repeat the process 2 to 3 times to store further data carriers You can teach at maximum 1 programming card and 50 data carrier at once The programming card and the data carrier can be teached in at several other locks 4 Delete stored data carriers individually hold the programming card once against the card reader panel A ticking is heard for approx 7 seconds During the ticking hold the data carrier against the card reader panel to delete it until a confirmation signal is sounded gt The data carrier is deleted 5 Open the latch e g with programming card and hold the latch in this position Put the program ming card 4x to the card reader panel The latch will hold open until a aut2. 3 Specific conditions for Short Range Devices SDR operating on frequencies between 9kHz and 40GHz Safety of machinery basic terminology general design princi ples part 1 general terminology methodology Safety of machinery basic terminology general design princi ples part 2 technical principles EN 1050 1996 Safety of machinery principles for risk assessment EN 50364 2001 Restriction of exposure of persons to electromagnetic fields of equipment which is operated in the frequency range from 0 Hz to 10 GHz and used in electronic article surveillance EAS radio frequency identification RFID and similar applications EN ISO 12100 1 2003 EN ISO 12100 2 2003
3. the battery compartment Observe correct polarity 4 Screw on the battery case cover with the M3x6mm screws provided gt The device is ready for programming ELS Premium general survey Programming button Screwing holes Special programming connector Card reader panel Handling and use of the programming connector is designed for special applications and only to be used in connection with the programming modules Ask your dealer or manufacturer for the products Install ELS Premium on furniture body and door Picture1 Lock and strike plate installation with flush closing door Tirstarke 15 5 mm A 21mm Abstand 32mm L 15 5 mm Abstand X 21mm 32mm Fuge joint T rst rke door thickness Abstand distance Uberschlag overlap Program the ELS Premium On delivery the lock is neutral Programming can be carried out altered at any time as described in the following Standard configuration means wheater the programming card nor the data carrier is programmed The audible signal is on and the mode standard is activated automatically closing of the latch The programming procedure as described in the following can be done changed at every time 1 Store programming card press the programming button of the lock for 3 seconds until a long signal tone and immediately afterwards a ticking is audible for approx 7 seconds
4. Technical specifications of the ELS Premium Mechanical specification Weight per set Complete set 142 Gramm Electrical specifications Equipment class as per Class 2 Directive 1999 5 EC SS HF radiation output max 66 dBuA m at 10m ee Frequency band 119 to 135 kHz ee CRIZA Ambient conditions Operating temperature 5 C to 35 C 41 F to 95 F Relative humidity operation 20 to 75 not condensing Disposal A Danger The electronics of the ELS Premium contains a lithium ion battery Dispose of this battery in accordance with national regulations When disposing of partly discharged batteries ensure that no accidental short circuits can occur between the poles of the battery for example due to key fob in pocket of clothing danger of explosion and fire Fasten the partly discharged battery for transport using non conductive adhesive film in such a way that no short circuits can occur Sy pee N important Separate electronics of the ELS Premium from the other parts and dispose of in accordance with local regulations and directives Warranty conditions This product was designed and manufactured carefully At the moment of purchase the warranty amounts 12 months for material and manufacturing failures The warranty starts with the date of purchase for 12 months The product can be exchanged prior to certification of the proof of pur chase The warranty conditions are limited to costfree exchange of the product or
5. ays If the battery level is low or the 20 000 openings have been exceeded the necessary battery replacement is indicated by an audible signal Under certain circumstances the signal may last for several days in which case automatic unlocking of the lock takes place Aim of the ELS Premium The ELS Premium is a compact wireless furniture lock for cupboards and drawers It is opened with an electric motor when closed the system locks itself Contactless chip technology is used as the key The system is woken up and opened by contactless identification via an author ised ID medium on the door The ID medium is simple to programme or delete The installation of the lock with the spring powered door opener is possible without drilling holes in the piece of furniture Functional description Authorised opening of an electronic lock in wooden furniture with an encoded chip ID me dium This chip can be in the form of an ID card cheque card format or key fob ELS Premium installation When unpacking check whether the components as per the description are present Dispose of the packaging in accordance with the applicable regulations of your country Insert battery 1 Normally the battery compartment is already open the cover with screws is contained in an accessory bag Otherwise open the battery compart ment by unscrewing the two M3x6 screws 2 Remove the battery from the blister pack 3 Insert the battery into
6. ed on not conductive materials wood plastic The max thickness of the material must not exceed 20 mm If used with higher material thickness or metal doors or doors with metal coatings an external antenna must be used Forseeable misuse Use of the lock in explosive environments Use of the lock outside of the stipulated specifications For damage resulting from incorrect use the customer bears sole responsibility the manufacturer accepts no liability whatsoever Conversions or modifications Any type of modification to the ELS Premium is not permitted The electromagnetic conduct of the ELS Premium may be impaired by additions or modifications of any kind Therefore do not carry out any modifications or additions to electric electronic components Replacement and wear parts and process materials The use of replacement parts from third party manufacturers may lead to dangers Use only original parts or parts approved by the manufacturer MART RFID locking system ELS Premium Installation and Usermanual Obligation of the user The user undertakes only to allow persons to work with the ELS Premium who have been instructed in working with the ELS Premium have read and understood this user s manual Warning signals of the ELS Premium The lock is equipped with a 3V battery which guarantees up to 20 000 openings The battery level is automatically checked if no opening by radio signal has taken place within 30 d
7. horised data carrier will reset the hold open function 6 Delete all stored data carriers hold the programming card against the card reader panel until after a few short signals a long confirmation signal is sounded gt All saved data carriers are deleted the latch is moved into the open position 7 Switch signal tone on or off keep the programming button pressed for max one second gt The signal tone is switched off on EEC Declaration of Conformity in accordance with the directives 89 336 EEC 1993 Directive on electro magnetic compatibility EMC 1999 5 EC 1999 Directive on radio systems and telecommunication end devices and mutual recognition of their conformity R amp TTE 2002 96 EC 2003 Directive on waste electric and electronic equipment WEEE 76 769 EEC 2005 Directive for restrictions on the marketing and use of certain hazardous substances and preparations ROHS for the product ELS Premium The following harmonised standards are applied EN 33330 2 V1 3 1 04 2006 Electromagnetic compatibility and Radio spectrum Matters ERM Short Range Devices SRD Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz Part 2 Harmonized EN under article 3 2 of the R amp TTE Directive EN 301489 3 V1 4 1 2002 Electromagnetic compatibility and Radio spectrum Matters ERM Electromagnetic compatibility standard for radio equip ment and services Part
8. repair Costs and risks caused by transport installation or de installation of the product and all other costs caused by the repairing will not be compensated Liability for consequential loss no matter which type are strictly excluded The user s manual must be accessible for operators In addition general and local regulations on accident Q Important prevention and environmental protection are to be ob served General safety instructions Important If the door is closed when starting up or changing the battery without inserting the battery the door cannot be opened via radio signals it is necessary to break the door open Follow the exact instructions for installation and start up of the radio systems and replacement of the batteries Remove the flat battery and to prevent a malfunction wait at least 30 seconds before inserting a new battery Observe correct polarity at the battery case and the battery itself O Important During installation of the lock and strike plate ensure that the door is not pre stressed and stresses are not transferred to the locking system There is a risk that the latch can no longer open malfunction Avoid doors which are pre loaded with a rubber profile Intended use Authorised opening of an electronic lock in wooden furniture with an encoded chip This chip can be in the form of an ID card cheque card format or key fob Function of the lock is only warran ted when mount
Download Pdf Manuals
Related Search