Home

V8.5.9.CMSManual(CSV859-A-EN).

image

Contents

1. New York Z Taipei Telephone H Telephone 0 Mobile Phone E mail GeoVision 2 87978377 geo geovisic gt Group 3 Subscriber 2 Figure 1 2 The buttons on the Address Book No Name 1 Add A Group 2 Add A Subscriber 3 View Edit Subscriber Address Book 4 Delete A Group Subscriber 5 Find A Subscriber 6 Import Export Address Book 7 Subscriber Settings 8 Subscriber Schedule Description Adds a group Adds a subscriber Highlight one subscriber and click this button to open Subscriber Address Book for viewing and editing Highlight a group or a subscriber and click this button to delete it Searches a subscriber account Imports or exports the address book data Highlight one subscriber and click this button to configure the settings of video and alert formats Sets up subscription schedules a Center V2 1 4 1 Creating a Subscriber 1 Click the Add A Group button No 1 Figure 1 2 to create a group 2 Click the Add A Subscriber button No 2 Figure 1 2 This dialog box appears Subscriber Address Book Login ID 1 Password Items Content Name GeoVision Address E mail E mail 2 Country Calling Code Fax Telephone H Telephone 0 Mobile Phone Mobile Phone 2 Pager Figure 1 3 3 Type a Login ID and Password Those will be the ID and Password for the subscriber to log into the Center V2 C GeoVision Type the subscri
2. Connective Port m Server Port Sets the communication port to match that of the subscriber or keep it as default m Port 2 To set the appropriate port for the connection to the GV Video Server GV IP Camera and GV Compact DVR keep the default port 5609 or modify it to match the VSM port on the GV IP devices For details see GV Video Server User s Manual GV IP Camera User s Manual or GV Compact DVR User s Manual Enhance network security Enable to enhance Internet Security Please notice when this feature is enabled the subscribers using earlier version than version 7 0 cannot access the VSM any more Arrow Button The arrow button in the Connective Port section provide the UPnP function to configure the ports on your router automatically For details on UPnP settings see UPnP Settings Appendix 179 C GeoVision 3 13 2 Password Settings You can create administrator and user accounts with different privileges Click Configure and then select Password Setup to open this dialog box Account Management Admin S Administrator 8J Admin Rename 83 Admin 1 Change Password E User B31 832 Login this ID automatically Account Management System Settings Edit Subscriber Account Stop Service Remove Event Figure 3 17 To change the login account on the VSM window click Service select Login Change User and type the desired account ID and password for login 180 a Vit
3. cccccccccesseeeeeeeeeeeeeeeeeeeeaaeeees 73 1 14 4 Setting the Event LOG i eecccccceeeeeeeeesseesssseseeeeeeeeeeeeeees 75 1 14 5 Printing the Event Log saseseessssscessiveewveieecesweeceeceeceeaccareeacccceenss 76 System Configuration cccccsseeesseeeeeeeeeeeeeeeneeeeenseeeneaes 77 1 15 1 General Settings esssiicsssssscoonssscessnenesensscoonnseesarneeeereneeeonineeiean ei 1 15 2 Layout Settings cc ccceseeeeceeeeeeeeeeeeeeeaeaeneeeeeeeeeeeeeeeeeeas 80 1 15 3 Network SUNOS oisssisssiiccrsccettteessssnneerrsiceeiienesnenneerneeceacienas 82 1 15 4 Recording Settings ccccccceccceeeeeeceeeeeeeeeeseeeeeeeeeeeeeeeeaaeeees 83 1 15 5 Dispatch Server Settings wiiiccciscccsicsiciiscdceoeseesssiseesasievedsweevenss 86 Notification Settings wivieiicssnwecsvinvsidsevetessierivndcrdumuvscvaretscaun 87 CUTOUT IOI ES conina 89 1 17 1 Configuring a Local GV I O BOX ccccccceseeeeeeeeeeeeeeeeeeeeaeeees 89 1 17 2 Configuring a Virtual GV I O BOX ccccceeeeeeeeeeeeeeeeeeeeeeaeeees 90 1 17 3 Triggering Outputs by Event ccccccecsseeeeeeeeeeeeeeeeeeeeeees 91 1 17 4 Triggering Outputs Manually 0 cc eceeeeeeeeeeeeeeeeeeeeeeeees 92 SMS Alesanana aeia 93 LISA Setting SMS Server sists nm 93 1 18 2 Connecting to SMS Server cccccccccseessessssseeeeeeeeeseeeneeees 95 1 18 3 Sending SMS oosssssssssssssssssssseseeerenreeerrrrrrrrrrrrrrrrrrrrrrrrrereeeen 95 1 18 4 Inserting Device
4. 1 oO A WwW JN O 150 Start Stop Service Account Show Hide Subscriber List View Event Log Force Output View Subscriber Information ID Ready vesvsm NUM Description Starts or stops the VSM service Adds deletes or modifies subscribers Shows and hides the Subscriber List Launches Event Log Browser Activates output devices manually to alert the VSM operator Accesses the subscriber s storage and monitoring information Enter an ID for further search No 10 11 12 13 14 15 16 17 18 19 20 21 Name View Subscriber Address Book View Subscriber Status Send E Mail Send Short Message Flag Clipboard ID Type Message Message Time Start Time Subscriber List Event Categories Event List Vital Sign Monitor Description Enter an ID and then click this button to view the subscriber s address book Enter an ID and then click this button to see the subscriber s status Sends e mails to subscribers Sends SMS to subscribers Flags an event for later reference Displays the Alarm Report dialog box Indicates the subscriber s ID Indicates the event types including System Connection Login Logout Motion Trigger and Alarm Indicates associated information for each event type Indicates the VSM s time when receiving the event message Indicates the subscriber s time when sending out the event message Indicates the numbe
5. To set up SMS Server click Configure on the window menu and select SMS Setup For details see 1 18 SMS Alerts To define alert conditions to send SMS messages click the Subscriber Notification Setting button No 5 Figure 2 1 on the toolbar to display the Notification Setting dialog box For setup details see 1 16 Notification Settings 140 2 Dispatch Server 2 17 E Mail Alerts This feature automatically sends e mails to subscribers when they don t log in on the programmed time For this ensure to type an e mail address for each subscriber in the Subscriber Address Book Figure 2 2 To set up mailbox click Configure on the window menu and select E Mail Setup For details see 1 19 E Mail Alerts To define alert conditions to send e mails click the Subscriber Notification Setting button No 5 Figure 2 1 on the toolbar to display the Notification Setting dialog box For setup details see 1 16 Notification Settings 141 C GeoVision 2 18 Event Chart Dispatch Server can display log data in line chart bar chart or pie chart To display the Event Chart you need to install the following software on the computer Use the links in the Software DVD or click Here below to download the software Microsoft NET Framework 3 5 SP1 or later versions Click Here Microsoft Chart Controls Click Here To access the Event Chart 1 2 142 Click View from the menu bar and select Dispatchlog Click the Eve
6. VSM 11081630 02328978 HW Serial 11081630 Internal Serial 00008EE6 Softwares VSM Control Center Kdentification Save Key ID Data Upgrade Upgrade Select All Select None Machine ID Exit Figure B 2 197 GeoVision 198 To retrieve the data from the dongle click Select All The information of the dongle is displayed in the information field Note the displayed number of HW Serial should be the same as that on the dongle To save the data to your local computer click Save Key ID Data If you have more than one dongle to upgrade click Batch Save Different dongle data will be saved as separate files The file will be named after the serial number on the dongle and saved as out For example if a dongle serial number is 7116442 the file is named NVR 7116442 0ut Send this data file to GeoVision at sales geovision com tw The GeoVision will examine the data file and send an in file back to you The file name also includes the serial number of that dongle In this example the data file you will receive is named NVR 7116442 in After you receive the updated file insert the correct dongle matching the in file you receive and then run GVUsbKeyUpClient exe Click Select All to read the dongle click Upgrade and then open the updated file to upgrade the dongle You can also select more than one dongle in the list and click Batch Upgrade to upgrade them at the same time Make sure these dongles
7. 5547 Defaut D Accept connections from GY Compact DYA Video Server amp IP Cam Pot 2 5551 D Note Any changes of this property will be applied in the next startup Figure 1 56 Location Name Indicates the name of the PC where Center V2 is installed Assign IP When your router or system has more than one IP address you can assign an IP address for the communication between GV System and Center V2 Enhance Network Security Applies enhanced security for Internet When the feature is enabled all subscribers using earlier version than version 7 0 cannot access the Center V2 anymore Center Port Indicates the communication port used by the Center V2 The port should match the one in Figure 1 7 To automatically configure the port on your router by UPnP technology click the Arrow button For details on UPnP settings see UPnP Settings Appendix Accept the Connection of GV Compact DVR Video Server amp IP Cam Enables the connection to GV IP devices For connecting with GV IP devices the default port is 5551 or you can modify it to match the Center V2 port on GV IP devices For details see their separate User s Manuals a Center V2 1 15 4 Recording Settings In Recording Settings you can configure storage locations storage durations and recycling conditions of video recordings Preference General Layout Network Record x xl V Recycle Path Free size Storage W D iCenterV2 Data 1 33 GB Stor
8. Mobile Phone Mobile Phone 2 FAX Pager lt Note Figure 2 4 6 Click OK to finish Note 1 You can create sub groups beneath a group every sub group can only include one Center V2 server every Center V2 server can include up to 500 subscribers 2 When one Center V2 server stops running its own subscribers will be distributed to available Center V2 servers at the same or higher level of the hierarchical file system 3 If you do not arrange Center V2 servers and subscribers into groups they will be distributed to the Center V2 server with fewer subscribers 121 C GeoVision 2 5 Service Startup After subscriber accounts are created you are ready to establish connections to the Dispatch Server Follow the steps below 1 On the main screen click Configure and select Setting The Dispatch Server Setting dialog box appears 2 Type an Identification Code This code will be used for connecting Center V2 Server to Dispatch Server s Dispatch Server Setting Network setting C Autorun server service upon startup _ Automatic Failover Support _ Allow unidentified CenterV2 Server login Identification Code ooKneoenn Dispatch Setting Group First O Balance Only Dispatch Log Keep Days 30 Log Path D Dispatch Log Available space 19 70 G8 CenterV2 Event Log Enable Real Time CenterV2 Event Keep Days 30 Log Path D Dispatch CenterV2Log Available space 19 70 GB
9. O Local EEE diiilt Figure 1 65 2 Type the IP address communication port Login ID and Password of the SMS Server 3 If the SMS Server is installed at the same computer with the Center V2 select Local If not select Remote 93 C GeoVision 4 94 To set up three mobile numbers of Center V2 operators to get notified when Center V2 loses connection to SMS Server click the Mobile Setup tab to display this window SMS Setup Connection Setup Mobile Setup SMS Option HotLine List Add to SMS List Y Mobile Number 925864721 Country Code 886 Please select a mobile to edit the HotLine List Figure 1 66 Select one mobile icon check Add to SMS List and type country code and mobile number To set time intervals between each SMS message when alert occurs click the SMS Option tab to display this window SMS Setup Connection Setup Mobile Setup SMS Option SMS Alert Setup SMS Alert Interval 1000 Min Figure 1 67 a Center V2 7 Inthe SMS Alert Setup field set the interval between 0 and 1440 minutes For details on SMS Server see Chapter 10 GV DVR User s Manual on the Software DVD 1 18 2 Connecting to SMS Server In the Center V2 window click the Tools button No 5 Figure 1 1 and then select Connect to SMS Server for connection 1 18 3 Sending SMS Once the connection of SMS Server and Center V2 is established there are several wa
10. Click the Schedule Setting button to set special days and customize up to 4 time spans Monitoring Schedule l Enable Time Span Setup V Spant PM18 00 gt P V Span2 Pm12 00 Span3 Pmr H M Pma H fa JPmi737 H V Pmi Holiday and Weekend Saturday Enable according to time span v Sunday Enable all day gt Holiday Enable according to time span _ Priority Weekend 1 ca Figure 1 13 Monitoring Schedule Without installing any I O device you can still set a time schedule to notify Center V2 of the events that occur during the defined times Click the Schedule Setting button on the right to define the time spans The Monitoring Schedule dialog box appears Figure 1 13 Advanced Settings Camera Other Monitoring Schedule Security Service H Schedule Setting Figure 1 14 31 C GeoVision 1 5 2 Setting Panic Button You may set up a panic alarm button at your GV System In case of emergency press the button immediately to send the associated video to Center V2 To set up a panic alarm select Panic Button from the Mode drop down list in the Connect to Center V2 dialog box Figure 1 8 click the Configure button and select Advanced Settings This dialog box appears Settings for Panic Button Panic Button Trigger by VO Mod 1 Pin 1 v j Output Module Mod 3 Pin 4 Send which Cameras to Center 2 Q Cancel Figure 1 15 Panic Button
11. Play v Suspend Motion Monitoring 0 Min Suspend Video Lost Monitoring O Min 52 Figure 1 33 3 fa Center V2 Live drop down list Highlight one camera and select Play enable live display or Stop disable live video Suspended Motion Monitoring Highlight one camera and set the interval between incoming events triggered by motion detection Alternatively you can right click one live camera channel on the monitoring window and select Suspend for the same setting Suspend Video Lost Monitoring Highlight one camera and set the interval between incoming events triggered by video lost Status column Displays the status of video lost from cameras or disconnection Click OK to apply the settings If the camera is enabled for live display you will see in the upper right corner of its monitoring window otherwise you will see al 53 C GeoVision 1 10 4 Viewing Subscriber Information To view the general information about your subscribers click the Host Information button No 6 Figure 1 1 on the Center V2 window to display the Host Information window Choose a subscriber from the list and click the View Information button to view its related information Host Information view Information Server Info Server Update time 2004 05 10 11 37 23 Recycle Log Camera On 01 02 amp Taiwan 1 Camera Of 03 04 05 06 07 08 0910111213141516 2 Camera Signal Lost None E USA
12. double click an established plan A plan dialog box similar to Figure 1 36 appears 2 Click the Advanced Setting button No 5 Figure 1 36 The Advanced Setting dialog box appears 3 Expand the Notification folder and select SMS or E Mail to be scheduled 4 On the plan dialog box click the Notification button No 8 Figure 1 36 drag the mouse over SMS and or E mail timelines to define the Start time and End time to send out alerts 57 C GeoVision 1 12 Alarm Report For every event the Center V2 operator can generate a report to evaluate certain conditions 1 12 1 Creating an Alarm Report 1 Inthe Event List window select an event and click on the report column No 15 Figure 1 1 This dialog box appears Managing Alarm 20030110 000018 Subscriber ID System Message Time 1 10 2003 11 57 20 AM Message Stop Service Reporter Admin End Report Save Close Procedure Report Time Real p Time Event Type 1 Reporter Admin 1 10 2003 3 29 34 PM 1 10 2003 3 29 34 PM Notification Measures Other Figure 1 37 2 Inthe Reporter field type the name and click Start to begin the report 3 There are 6 report categories Click the desired category tabs for report E Event Type Select a type to classify the event m Description Select a description for the event m Notification Select the authority being notified and type the 58 a Center V2 notified
13. will be 15 minutes Monitor the camera sent by GV Wiegand Capture Specifies the duration of the camera view remaining on the monitoring window when the access control system connected to GV Video Server is triggered For details see Chapter 8 CMS Configurations in the GV Video Server User s Manual Record the channel triggered by video analytics events Sets the total recording time for a video analytics event The default length is 30 seconds The valid range is 3 to 600 seconds Image Quality Adjusts the video quality Moving the slide bar to the right side for the better quality and the bigger image size Enable Directdraw Enables an enhanced image performance for live video To enhance coloring click the right arrow button select Use Colorful Mode and restart the Center V2 program to take it effect Start up 78 Auto Run when Windows Starts Automatically runs Center V2 when Windows starts Login SMS Server when Start Service Automatically logs in SMS Server when Center V2 starts You will be prompted to type the IP address Port ID and Password of the SMS server a Center V2 Channel Caption Font and Color Click the Settings button to change the font and color of the captions Use the subscriber setting color as background Checks the option to apply the caption settings For details see Channel Heading earlier in this chapter 79 C GeoVision 1 15 2 Layout Settings This feature transfers
14. z Recycle Log Cx Figure 2 5 122 a Dispatch Server Connect Center V2 Server to Dispatch Server See 2 6 Connecting Center V2 to Dispatch Server To add a GV System as a subscriber connect GV System to Dispatch Server See 2 7 Connecting GV System to Dispatch Server To add a GV IP Device as a subscriber connect GV IP Devices to Dispatch Server See 2 8 Connecting GV IP Device to Dispatch Server Click the Start Server button No 1 Figure 2 1 on the main screen to start the service 123 C GeoVision 2 6 Connecting Center V2 to Dispatch Server Follow these steps to connect Center V2 to Dispatch Server 4 D 124 Start the Dispatch Server service At Center V2 click the Preference Settings button No 8 Figure 1 1 select System Configure to display the Preference window and then click the Dispatch Server tab The Preference dialog box appears Click the Dispatch Server tab Type the identification code IP address and the port of the Dispatch Server R Preference Dispatch Server Setting Network setting General Layout Network Record Dispatch Server Dispatch Server Use Dispatch Server Identification 123456789 Address 127 0 0 1 21112 Connection Broken C Automatic Failover Support O low unidentified CenterV2 Server login V Retry until connected Retry Intervat 10 Sec Identification Code Note Dispatch Setting Any changes of this property wi
15. 1 60 List box Select an alert condition in the left list box and configure its settings Alert Approach E Invoke Alarm Select a computer alarm from the drop drown list Or select User Define from the list to import one desired wav sound Click the Arrow button beside to test the assigned alarm Click the Repeat Mode button to keep the alarm on until the alarm is manually turned off E Output Module Select an installed output model and pin number to alert the Center V2 operator To set up an I O module on the Center V2 see 1 17 Output Alerts E Send E Mail Alerts Enables e mail alerts to send e mails to subscribers Click the Edit button to edit a message For Mailbox settings see 1 19 E Mail Alerts 87 C GeoVision E Send SMS Alerts Enables SMS alerts to send SMS messages to subscribers Click the Edit button to edit a message For SMS Server settings see 1 18 SMS Alerts E Minimum Duration This option is only available for Camera Motion and Connection Lost alerts The minimum duration is the minimal time period that the event must persist for Center V2 to be notified by alarm output e mail and or SMS Select this option and click the Edit button to type the minimum duration The default is 3 seconds Note The minimum duration function is used to minimize false motion detection alerts such as in a outdoor scene with flying insects or to exclude connection lost alerts from cameras that resume to network instantl
16. 10 Device Normal Module01 Input Alarm Pin01 Pin02 Pin03 Pin04 Last 100 10 Events Event001 2004 05 10 11 25 23 Module01 Pin01 Pin02 Pin03 Pin04 Figure 1 34 For the feature the subscriber must grant the privilege to Center V2 See the Allow Center V2 to Get System Information option in Figure 1 11 1 10 5 Disabling Subscription The Center V2 operator can disable its services to an individual subscriber when subscription expires In the Address Book Figure 1 2 right click one subscriber and select Disable To restore the subscription right click that subscriber again and select Enable 54 a Center V2 1 11 Subscriber Schedule The Center V2 operator can create schedules to monitor subscription status When subscribers do not log in Center V2 on the programmed time the operator and subscribers will get notified When a subscriber doesn t log in Center V2 on time this message will appear on the Event List Service hour engaged still waiting for subscriber to log in When a subscriber logs out suddenly during a service time this message will appear Unexpected subscriber logout during service times To activate the computer and output alarm to notify the operator while an SMS and E mail message being sent out to a subscriber use the Notification feature For details see Notification Settings later in this chapter 1 11 1 Setting a Schedule On the Center V2 window click the Accounts button No 7
17. 264 User s Manual for detail 2 The option Send temperature status to Vital Sign Monitor must be enabled on GV System with GV 3008 Card For details see System Information Advanced Settings for Subscription 3 6 Connection to VSM I O Device m Force Output To enable this tab highlight one output from the tree list and click this tab to force the output at the subscriber site to be triggered For this function to work the subscriber must grant the privilege first See the Allow Vital Sign Monitor to Force Output option in Figure 3 7 m Enable Disable I O Allows the VSM to arm or disarm any I O devices at the subscriber site without interrupting the monitoring For this function to work the subscriber must grant the privilege first See the Allow Vital Sign Monitor to Enable Disable I O option in Figure 3 7 Note This function also supports the client GV IP devices of these firmware versions GV Compact DVR Firmware V1 43 or later GV IP Camera Firmware V1 05 or later GV Video Server Firmware V1 45 or later 168 a Vital Sign Monitor 3 7 2 Viewing Storage Information With the above Subscriber Status window you can see one subscriber s storage information When the VSM is monitoring many subscribers the following windows give you an overview of subscribers storage information and monitoring status On the VSM window click the View Subscriber Information button No 6 Figure 3 1 to display the fo
18. 3 7 Subscriber Monitoring 3 7 1 Viewing Subscriber Status To view the subscriber status highlight one online subscriber on the VSM window and then click the View Subscriber Status icon No 9 Figure 3 1 on the toolbar The following window appears Subscriber Status Subscriber Temperature VO Device Current ID G FD120D 475 C Video Log Storage Camera _ VO Monitoring Recycle Unknown J Camera 2S Module 1 Last Recycle Input Input Keep Days Output lt gt Outputt ii Available 0 E vsea Total Space Status a2 Normal amp Motion Trigger 4 Video Lost E Module Lost J Monitoring ON OFF Figure 3 10 Subscriber Indicates the subscriber s ID You can change the subscriber by clicking the button Video Log Storage Indicates the information of video log and hard disk space To view the detailed information of multiple storage groups on the subscriber click the button To use this function subscribers must grant the privilege first See the Allow Vital Sign Monitor to inquire the storage information option in Figure 3 8 167 C GeoVision Status Indicates the meanings of icons Temperature Indicates the temperature of subscriber This feature is only supported in certain models of GV IP Camera and GV System with GV 3008 Card Note iP For the GV IP Cameras that support temperature display refer to the GV IPCAM H
19. Code Identification Code The code protects Dispatch Server against unauthorized Internet access Center V2 will need the code to log in Dispatch Server Dispatch Setting Group First Keeps subscribers in the assigned groups and Center V2 Servers Balance Only Distributes subscribers to Center V2 Servers with fewer subscribers Note An unassigned subscriber will be automatically dispatched to a Center V2 Server by balance loading 138 a Dispatch Server Dispatch Log E Keep Days Select the option and specify the number of days to keep Dispatch Logs Otherwise clear the option to keep log until the Recycle starts or storage space is full m Log Path Click the button next to the item to assign a storage path CenterV2 Event Log m Enable Real Time CenterV2 Event Allows real time event messages coming from Center V2 Servers m Keep Days Select the option and specify the number of days to keep Center V2 event logs Otherwise clear the option to keep log until the Recycle starts or storage space is full m Log Path Click the button next to the item to assign a storage path Recycle Log Deletes the files of the oldest days when storage space is lower than 500 MB 139 C GeoVision 2 16 SMS Alerts This feature automatically sends SMS messages to subscribers when they don t log in on the programmed time For this ensure to type a mobile number for each subscriber in the Subscriber Address Book Figure 2 2
20. Dongle options for Dispatch Server cccccccccseeeeeeeeeeeeeeeeeeeeeaaeeees 195 Dongle options for VSM iscciicedeinnnetsanncccnmnonccronnteanisdsussemmannmeamaneeenuauil 196 Upgrading the Black Dongle cccceseeeeeeeeeeeeeeeeeeeeneeees 197 Fast Backup and Restoration ccccccsseeseeeseeeeeeeeeeeeeeeeees 199 Installing the FBR Program ccccceeeeeeeeeeeeeaeeeeeeeeeeeeeeeeeeeeaaaeaes 199 Backing Up and Restoring Settings ccssssesssseeeeeeeeeeeeeneeeees 200 Watermark PrOOTssrasiinosian ien rakinai ai 202 PTZ Control Using GV Joystick V2 sccceeseeeesseeeeeeeeeeees 203 Image Size ON Center V2 cccesseceeseeeeeseeeeeeeeeeeaeeensaneenseaeens 204 UPAP SENNO S orean aa E Aa 205 Supported IP Device Brands and Protocols 02 00 207 MultiLang Tool for Translated TexXt ccccsseeessseeeeseeeneaees 208 SDECIIGAUION S esirinnas iaeiiai iadaaa n ia 212 CEMT eae ee ee et 212 Biio72 elgeels 2 pcre cence renee eer entree rer Trt tre 213 Comparison of VSM and Center V2 Pro ccccecceceeeeeeeeeeeseeeeeeeeeees 214 C GeoVision Preface GeoVision Center Monitoring Station series includes Center V2 Dispatch Server VSM Vital Sign Monitor Control Center and GIS The manual introduces Center V2 Dispatch Server and VSM For Control Center and GIS please refer to GV Control Center User s Manual and GV GIS User s Manual vi Chapter
21. Name 1 Start Server 2 Stop Server 3 Server Setting 4 Account 5 Subscriber Notification Setting 6 Manual Dispatch Description Starts Dispatch Sever Stops Dispatch Sever Configures Dispatch Sever Adds edits and deletes the accounts of Center V2 Servers and subscribers Sets the alert conditions and methods Enables manual distribution of subscribers Click this button and drag a subscriber to the desired Center V2 Server 117 GeoVision No 10 11 12 118 Name Stop Start Query Center V2 Event Real time CenterV2 Event Exit Center V2 Status Tree View Subscriber Status Description Specifies an event query Views real time events occurring on Center V2 Servers Closes the Dispatch Server window This part lists the connected Center V2 Servers and their status Subscribers can be distributed to the ticked Center V2 Servers Unchecking will disable the distribution service The list displays all created group folders servers and subscribers You can right click any online subscriber to call up Subscriber Address Book and Camera Audio Control Panel For details see 2 17 Live View Blue Icon The server subscriber is online Red Icon The server subscriber is offline Displays subscriber information such as subscriber ID type last login time last dispatch and current dispatch Click the desired subscriber form the tree view to display this information 2 Dis
22. Service below The delay settings in Send to Center V2 when I O is triggered and Output Module allow you to enter your premises and disable input output module before it is activated To disable prior I O settings the subscriber may exit the connection to Center V2 or use the Stop monitoring normal events when selected pin is triggered feature in Figure 1 12 Allow Center V2 to Force Output Allows Center V2 to manually force output devices of the subscriber to be triggered Security Service Defines the input type or the schedule Proceed to configure input and schedule settings 30 Momentary Mode Pushbutton switches that are normally open and stay closed only as long as the button is pressed Momentary switches allow turn on or turn off from multiple locations For example certain premises have a designated entry exit door When the staff enters the entry door the system starts monitoring When the staff leaves from the exit door the system stops monitoring Maintained Mode Push on push off button switches that stay open until thrown and then stay closed until thrown again Maintained switches are convenient for only one switch location For example in the business hour when the door is opened the system stops monitoring in the non business hour when the door is closed the system starts monitoring a Center V2 E Schedule Mode Sets a time schedule to notify Center V2 of the events that occur within the defined times
23. Subscriber Login C Send E Mail Alerts Subscriber Logout Camera Motion Cl Send SMS Alerts Surveillance System Abnormality Intruder Missing Object Unattended Object Text Format of SMS OK Scene Change Tampering Alarm POS Loss Prevention ascII O Unicode Figure 1 68 2 Select the event into which you wish to insert the subscriber name and ID and select Send SMS Alerts This dialog box appears Short Message Service Text Content Characters Used 0 160 Figure 1 69 96 3 a Center V2 Type the message text and click the Macros button This dialog box appears Short Message Service Text Content Symbol Text 2 71 connection is lost 71 ID 2 Camera Name Characters Used 257160 D Figure 1 70 Place the pointer to where you wish to insert the subscriber name and ID in the text select the corresponding symbol and click Insert The symbols will be replaced with real information when the message is displayed to the user 97 C GeoVision 1 19 E Mail Alerts You can send e mails to subscribers when alert conditions occur 1 19 1 Setting Mailbox Before you can send e mails to a separate e mail account you need to define your mailbox correctly Setting up the mailbox 1 98 On the Center V2 window click the Preference Settings button No 8 Figure 1 1 and then select E Mail Setup This dialog box appears Setup Test Charset We
24. To configure GV System in order to access the VSM remotely through a network connection follow these steps 1 Click the Network button and select Connect to VSM This dialog box appears Login Information Center IP 127001 User ID Rs Password as Port 5610 Default V Save Password OK Cancel Figure 3 3 2 Type the IP address the User ID and Password of one VSM Click OK This dialog box appears Connect to Vital Sign Monitor Exit Configure Qy M Login after 30 seconds W Monitoring all type events wo Status 127 0 0 1 oP Figure 3 4 156 a Vital Sign Monitor If you want to establish connection to the second VSM click the TP button If you want to modify the login information of the established account select the account in the dialog box and click the button If you want to delete the established account select the account in the dialog box and click the button Click the Connect button to connect all established VSM centers Make sure those VSM centers are also started for the connection 157 C GeoVision 3 6 1 Advanced Settings for Subscription To further define the communication conditions between the subscriber and VSM click the Configure button on the Connect to Vital Sign Monitor dialog box Figure 3 4 to display the Advanced Settings dialog box There are tabs 1 General 2 Camera 3 I O Device and 4 System Information G
25. an output to be triggered click a desired output and click the Force Output button Or select a desired output pin and click the Force Output button To reset an output click a desired output pin and select Reset Or click the Reset Output button and select the desired module and output pin 48 a Center V2 1 10 2 Camera Audio Control Window The Camera Audio Control window allows two way audio between CenterV2 and the subscriber as well as PTZ control On the Subscriber List No 4 Figure 1 1 right click one online subscriber and then select Camera Audio Control to display this window Figure 1 31 49 GeoVision The controls on the Camera Audio Control No Name 1 2 50 Change Camera Change Size Audio Microphone Setting PTZ Snapshot Zoom Description Switches to another camera of the same subscriber m Size Changes the size of the live video The size choices are only available when the video resolution is higher than 320 x 240 see Image Size in Subscriber Settings Defog Enhances image visibility Stabilizer Stabilizes live images Stream1 Stream2 Switches video streams PIP View Refers to Picture in Picture You can zoom in on the video See 4 17 PIP and PAP View PAP View Refers to Picture and Picture You can create a split video effect with multiple close up views on the video See 4 17 PIP and PAP View m Fisheye Enables a 360 degree view This function
26. and click the Subscriber Settings button i The Subscriber Settings dialog box appears 3 Select a storage group from the drop down list Subscriber Settings DVR1 Monitor Option Image Size Auto Record Video Record Mode Attachment Mode Both Live amp Attachment Note Any changes of this property will be applied in next trigger Color of Channel Caption Storage Group Storage 1 a v Storage 1 Storage 2 l Figure 1 59 4 Repeat steps 1 to 3 to assign a storage group to another subscriber 1 15 5 Dispatch Server Settings See 2 6 Connecting Center V2 to Dispatch Server 86 a Center V2 1 16 Notification Settings When alert conditions occur Center V2 can automatically activate the assigned computer and output alarm to notify the operator while an SMS and an e mail message are being sent out to subscribers For this application click the Preference Settings button No 8 Figure 1 1 on the Center V2 window and select Notification to display this window Alarm Settings Alert Approach VO Trigger Emergency Connection Lost M Invoke Alarm Subscriber Login Subscriber Logout Camera Motion Surveillance System Abnormality C Send E Mail Alerts Intruder Missing Object C Send SMS Alerts Unattended Object Scene Change Tampering Alarm POS Loss Prevention Disk Full Text Format of SMS Stop all cameras monitoring Stop I O Monitoring Oascil O Unicode Figure
27. is off line Alarm Icon Indicates either motion has been detected or the I O has been triggered at the subscriber s site Accesses Event Log Event List Event Chart QView audio and microphone control SMS Server configuration and short message notification Displays the connection status of subscribers Adds deletes or modifies subscriber accounts Brings up these options System Configure Event Log Settings Notification Password Setup E mail Setup Customize Alarm Report SMS Setup I O Device Automatic Failover Support and Version Information Displays the previous page of camera views Displays the next page of camera views Refresh Channel Refreshes the connection status No Name 12 Split Mode 13 Exit 14 Flag 15 Clipboard 16 Clip fa Center V2 Description In the 1024 x 768 resolution select 6 15 or 24 screen divisions for a single monitor 9 25 or 36 screen divisions for dual monitors In the 1280 x 1024 resolution select 6 12 or 24 screen divisions for a single monitor 9 20 or 42 screen divisions for dual monitors In the 1600 x 1200 resolution select 6 12 or 24 screen divisions for a single monitor 9 16 or 36 screen divisions for dual monitors In the 1680 x 1050 1920 x 1200 and 1440 x 900 resolutions select 6 15 or 28 screen divisions for a single monitor 9 20 or 42 screen divisions for dual monitors In the 1920 x 1200 resolution select 6 15 or 28 screen divisions for a
28. match the updated files you receive Appendix C Fast Backup and Restoration With the Fast Backup and Restore FBR solution you can change interface skin for Center V2 and Control Center as well as back up and restore your configurations in CMS applications Installing the FBR Program 1 Insert the Software DVD click Install GeoVision Supplemental Utilities select GV Fast Backup and Restore Multicam System and follow the on screen instructions 2 After the installation is complete run GV Fast Backup and Restore Main System from the Windows Start menu This window appears lt gt Fast Backup t Restore MultiCam System Fast Backup amp Restore Digital Surveillance System s Settings Please choose one ofthe selections below ha Customize Logo and Button Customize Features Backup MultiCam Settings or Restore Defaults Fa Backup Remote AP Settings Figure C 1 199 C GeoVision Backing Up and Restoring Settings You can back up the configurations you made in the CMS application and restore the backup data to the current system or import it to another site Backing Up the Settings 1 In the FBR window Figure C 1 click the Backup Remote AP Settings icon and select the desired application from the menu For example we select VSM Server This dialog box appears x Fast Backup amp Restore MultiCam System Fast Backup amp Restore Digital Surveillance System s Settings Please choos
29. only works with a Fisheye Camera m Wide Angle Lens Dewarping Corrects image distortion See Adjusting Distorted Views in 1 8 Playback Accesses the audio from the subscriber Enables speaking to the subscriber Changes the audio and video settings Activates the PTZ control by selecting PTZ Panel or PTZ Automation Takes the snapshot of the displayed live video Enlarges the video by selecting 1 0x 2 0x and 3 0x a Center V2 Note If the subscriber uses GV System version 8 2 or earlier an older style of Camera Audio Control Window will appear If the GV System version V8 3 or later is in use a new window will appear 1 Cameral Window for V8 2 or earlier Window for V8 3 or later Figure 1 32 51 C GeoVision 1 10 3 Camera Monitor Use the Camera Monitor window to define the following e Enable and disable live display The subscriber must give the privilege first See the Allow Center V2 to View Live Camera option in Figure 1 10 Define the interval between incoming events triggered by motion detection and video lost 1 On the Subscriber List No 4 Figure 1 1 right click one online subscriber and select Camera Monitor 2 The Camera Monitor window appears Camera Monitor Camera Name Camera 1 Camera 2 Camera 3 Camera 4 Live Play Stop Stop Stop Suspend 0 0 0 0 Suspend 0 0 0 0 Status Video Lost Video Lost Video Lost Camera 1 Live
30. select Connect to Center V2 click Configure select Advanced Settings and click the Other tab The Advanced Settings dialog box appears Figure 1 11 2 Under the Audio section select Allow Audio Out to Center V2 and Allow Audio in from the Center V2 Click OK 3 Connect the GV System to the Center V2 4 Move your cursor to the live view The Microphone and Audio icons appear on the bottom left corner 1 Camera 1 oes WIX Figure 1 26 45 C GeoVision 5 To speak to the subscriber click the Microphone icon to turn it on The control panel appears Close this window and On Off Button Subscriber Name stops microphone Microphone Status Reduce this window to an icon Figure 1 27 6 To listen to audio from the subscriber click the Audio icon to turn it on The control panel appears Close this window On Off Button Subscriber Name and stops audio x Audio 2 Click to change Audio Status Reduce this window audio to an icon Figure 1 28 7 To switch to another subscriber click the subscriber icon onthe Microphone or Audio control panel type the subscriber s ID in the Search Account dialog box and click GO Search Account D Figure 1 29 46 a Center V2 1 10 Advanced Monitoring and Management This section describes how to monitor and manage subscribers in these parts 1 Showing and Controlling I O Status 2 Camera Audio Control 3 Simple Microphone and Audio Panels
31. select QView This dialog box appears Figure 1 82 2 Use the drop down list to select a desired monitor 3 Click one channel to be displayed on that monitor A Bz en a a eee a 2 a Select a channel to be displayed The selected channel is displayec on another monitor screer on another monitor screer Figure 1 83 4 To switch to another channel simply click another channel 112 Chapter 2 Dispatch Server The availability of Center V2 Servers may be threatened by network overload Thru Dispatch Server the concern can be settled by arranging and distributing subscribers requests to the least busy Center V2 Servers With Dispatch Server a central monitor station can run several Center V2 Servers and serve a large number of subscribers with the fastest responding time If any of Center V2 Servers needs maintenance Dispatch Server can automatically redistribute subscribers requests to other Center V2 within a server farm or to servers in another location C GeoVision 2 1 Minimum System Requirements Before installation make sure that your computer meets the following requirements Standard Requirements Windows XP Vista 7 8 Server 2008 Windows 7 8 Server 2008 Sever 2012 Pentium 4 3 0 GHz with Hyper Threading 2 x 512 MB Dual Channels AGP or PCI Express 800 x 600 1280 x 1024 recommended 32 bit color Internal or External GV USB Dongle Advanced Requirem
32. started Sample Text Figure 1 46 To assign an alert level select Using Priority Color and choose from the drop down list To change the color for this alert level click the color box and select a desired color To customize the color of this event type select Using Custom Color and click the color box to assign a desired color Click OK to complete a Center V2 1 14 Event Log Browser The Event Log Browser allows you to locate a desired event coming from subscribers On the Center V2 window click the Tools button No 5 Figure 1 1 and select View Event Log to display the following window Tip You can quickly access the Event Log of a specific subscriber instead of filtering all events Right click one subscriber on the Subscriber list No 4 Figure 1 1 select Event Log and then click a desired log type ID Type Message Message Time lt 4 Start Time System System Start Service 8 19 2003 10 14 52 AM 1 LoginLogout Login 8 19 2003 10 14 54 AM 1 System Start Monitoring All Type Events 8 19 2003 10 14 54 AM 8 19 2003 10 14 53 AM 1 Device Lost Camera 3 Video Lost 8 19 2003 10 14 54 AM 8 19 2003 10 14 54 AM 1 Device Lost Camera 6 Video Lost 8 19 2003 10 14 54 AM 8 19 2003 10 14 54 AM Total data list 20 Open Finish Figure 1 47 The buttons on the Event Log Browser No Name Description 1 Open Opens an event log 2 Reload Refreshes the event log manually 3 Sane Event Log Refreshes the event log a
33. the defined schedule For details see I O Device Advanced Settings in 1 5 Connection to Center V2 162 a Vital Sign Monitor System Information Advance Settings General Camera System Information Video Audio Log Storage Information Allow Vital Sign Monitor to inquire the storage information Report the total amount of free storage space to Vital Sign Monitor Report Interval H Hours M Notify Vital Sign Monitor when the total amount of free storage space is lower than 1i amp iV Notify Vital Sign Monitor when storage is full iV Notify Vital Sign Monitor when any storage is lost Other Notify Vital Sign Monitor when the user logs in or is changed Notify Vital Sign Monitor when the user fails to log in the Multicam Notify Vital Sign Monitor when the USB Protection Key is removed Notify Vital Sign Monitor when the Multicam starts recycling Send temperature status to Vital Sign Monitor Figure 3 8 Video Audio Log Notifies the VSM when the duration of the video audio logs is less than the specified days Storage Information Allow Vital Sign Monitor to inquire the storage information Allows the VSM to inquire the subscriber s storage information Report the total amount of free storage space to Vital Sign Monitor Reports the subscriber s size of free storage space Notify Vital Sign Monitor when the total amount of free space is lower than xx GB Notifies the VSM when the subscriber s
34. 0 a Dispatch Server 2 11 Event List The feature lets you view the real time events occurred on Center V2 Servers For the application make sure the Enable Real Time CenterV2 Event option is enabled see Figure 2 13 Then click the Real Time Event button No 8 Figure 2 1 on the toolbar to display the following window s Real Time CenterV2 Event Type Message Message Time Start Time System Start Monitoring All Type Events 11 10 2006 11 42 04 AM 11710 2006 11 42 05 AM System Stop VO Monitoring 11 10 2006 11 42 04 AM 11 10 2006 11 42 05 AM System Stop all cameras monitoring 11 10 2006 11 42 04 AM 11 10 2006 11 42 05 AM Trigger Module 1 Input 1 Trigger 11 10 2006 11 42 04 AM 11 10 2006 11 42 05 AM Connection Camera 2 Video Lost 11 10 2006 11 42 04 AM 11 10 2006 11 42 05 AM Connection 11 10 2006 11 42 04 AM 11 10 2006 11 42 05 AM gt Vi 6 We lt Figure 2 11 The controls on the Real Time Center V2 Event window 1 The window supports the remote playback when folder sharing on the recording folder of Center V2 is enabled Double clicking any event with video attachment can play it back on Dispatch Server 2 You can flag an incoming event for later reference Click in the flag column to flag an event Click the flag icon to remove it Note The flags of various colors are provided to distinguish different events You will find them useful not only when browsing in the Real Time CenterV2 Event List window but also when us
35. 1 Center V2 With Center V2 central monitoring station CMS can be deployed immediately because it brings multiple GV Systems together into an integrated interface allowing the operator to manage several systems from one point of control The basic feature of Center V2 is to view live video and receive video evidence in an attachment format when any alerts are sent to Center V2 This helps the remote end operator easily determine the nature of the alarm Center V2 also supports GV IP devices GV Video Server GV Compact DVR GV IPCam for central monitoring C GeoVision 1 1 Minimum System Requirements Before installati requirements Standard Version Connects up to 5 subscribers amp 160 channels Professional Version Connects up to 500 subscribers amp 800 channels on make sure your computer meets the following minimum Windows XP Vista 7 8 Server 2008 Windows XP Vista 7 8 Server 2008 Windows 7 8 Server 2008 Server 2012 Core i7 2600 3 4 GHz 8 GB Dual Channels rd AGP or PCI Express 1024 x 768 32 bit color Note We don Center module __ Internal or External GV USB Dongle ot recommend installing GV Center V2 Pro and GV Control s on the same PC Running GV Center V2 Pro and GV Control Center on the same PC may result in CPU overload error or system failure Software License for Professional Version 500 subscribers 800 channels Center V2 Pro Center V
36. 2 Pro VSM Note It is recommended to use the internal GV USB Dongle to have the Hardware Watchdog function which restarts the PC when Windows crashes or freezes C GeoVision 1 2 Installation 1 2 1 Standard Version 1 Insert the Software DVD to your computer It runs automatically and a window appears Select Install GeoVision Primary Applications Click GV Center V2 and follow the on screen instructions 1 2 2 Professional Version Connect the GV USB Dongle to the computer Insert the Software DVD to your computer It runs automatically and a window appears To install the USB device driver select Install or Remove GeoVision GV Series Driver and select Install GeoVision USB Device Driver To install the GV Center V2 select Install GeoVision Primary Applications Click GV Center V2 and follow the on screen instructions paze Camera 5 May 05 18 36 18 Cafnera 1 Camera2 aI Camera3 AR Camera 4 zx Camera 6 N rs Til sa v EE 29 86 GB x 1 DYR1 E Center 2 Pro S E Taipei DRI a E Tokyo E DRZ Camera 13 E Camera 14 FI Camera 15 GAX Camera 16 BA Camera 17 ADM Carera 18 aD Q y 7 TEA gil Ee Camera 23 ald Camera 24 EE 8 ID Type Message Message Time DVR2 Motion Camera 1 detected motion 5 5 2011 6 33 22 PM DVR1 Motion Camera 2 detected motion 5 5 2011 6 33 22 PM D3 g DYR1 Attachment Record file of C
37. 2011 3 46 44 PM 5 11 2011 3 46 46 PM 5111 2011 3 46 48 PM 6111 2011 3 46 48 PM 5111 2011 3 46 49 PM ape 3 46 50 PM J AG 46 4 Wiegand Data Lost Offline ome 4 gt 83 CenterV2 Pro a E a DRI E Tokyo A DYRZ amp Camera 1 amp Camera 2 Zp Camera 3 a Camera p Camera 5 p Camera 6 p Camera Gp Camera 8 Zh Camera 9 Camera 10 p Camera 11 Gp Camera 12 Start Time 5 11 2011 5 51 23 PM 5 11 2011 3 46 39 PM 6111 2011 3 46 39 PM 6111 2011 3 46 36 PM 6111 2011 5 51 26 PM 6111 2011 5 51 22 PM 5111 2011 3 46 39 PM 5 11 2011 3 46 33 PM 6111 2011 5 51 33 PM 5111 2011 3 46 48 PM 6111 2011 3 46 49 PM at 1 2011 3 46 7 67 C GeoVision 68 On the Center V2 window click the Preference Settings button and select Customize Message Settings The Customize Message Settings dialog box appears On the left select an event type you wish to configure Customize Message Settings Camera Motion Text Color Video Lost Assign By Priority 0 Triguer VO Module Lost Normal The network connection is lost Disk Full Customize Color ea e Logout Start Service Stop Service Sample Detected change of bind IP restart the service Failed to establish the connection Multicam Surveillance System is abnormally c Show Camera by VO Trigger Failed to start recording Add to the Customized Event Tab Record File Failed to Login Dispatch Server Recycling is
38. 4 Camera Monitor 5 Viewing Subscriber Information 6 Subscription Control 1 10 1 Showing I O Status You can view the status of input devices at the subscriber s site as well as forcing the outputs Note This function is applicable to the client GV IP devices of these firmware versions e GV Compact DVR Firmware V1 43 or above e GV IP Camera Firmware V1 05 or above o GV Video Server Firmware V1 45 or above The Center V2 operator can manually arm or disarm the I O devices installed at subscribers without interrupting the monitoring To apply this application the subscriber must enable Allow Center V2 to Enable Disable I O and Allow Center V2 to Force Output options first to allow access by the Center V2 For details see Figure 1 12 47 C GeoVision On the Subscriber List No 4 Figure 1 1 right click one online subscriber and select Show I O Status to display this window TA 1 0 Status E i Module 1 Ml ge Input Pin i 4 Cl s Input 1 Input 2 Input 3 Input 4 E M Output Pin i 4 Output 1 Output 2 Output 3 w Output 4 Reset Output Figure 1 30 Module Shows the module s I O status Input Shows the input device status The blue icon indicates the input is deactivated the red lightening icon indicates the input is activated Output Shows the output device status or to manually force an output or reset an output installed at the subscriber site To manually force
39. 7 12 2011 5 04 42 PM 7 12 2011 5 05 06 PM 7 12 2011 5 05 06 PM 7 12 2011 5 05 06 PM 7 12 2011 5 05 08 PM 7 12 2011 5 05 23 PM 7 12 2011 5 05 52 PM 7 12 2011 5 06 36 PM 7 12 2011 5 06 36 PM 7 12 2011 5 06 51 PM 7 12 2011 5 07 07 PM 7 12 2011 5 07 21 PM 7 12 2011 5 07 36 PM 7 12 2011 5 07 51 PM 7 12 2011 5 08 06 PM 7 12 2011 5 08 35 PM 7 12 2011 5 08 50 PM 7 12 2011 5 09 05 PM Offline Event Start Time 7 12 2011 4 37 28 PM 7 12 2011 5 05 06 PM 7 12 2011 5 05 06 PM 7 12 2011 4 38 27 PM 7 12 2011 4 38 42 PM 711212011 4 39 11 PM 7 12 2011 5 06 36 PM 7 12 2011 4 39 56 PM 7 12 2011 4 40 11 PM 7 12 2011 4 40 27 PM 7 12 2011 4 40 41 PM 7 12 2011 4 40 56 PM 7 12 2011 4 41 11 PM 7 12 2011 4 41 26 PM 7 12 2011 4 41 54 PM 7 12 2011 4 42 09 PM 7 12 2011 4 42 24 PM Customized Event a GV FD120D 5 GeoVision a GV FD120D DVR 1 Em Camera 1 Y System n Camera 2 System Camera 3 GV FD120D am Camera 4 g DYR 1 Camera 5 ed DVR 1 ax Camera 6 Camera 7 DVR 1 a Camera 8 GV FD120D Camera 9 GV FD120D a Camera 10 GV FD120D ae Camera 11 am Camera 12 ait 2 Camera 13 GV FD120D Camera 14 GV FD120D Camera 15 GV FD120D ae Camera 16 GV FD120D 5 Gv FD120D 5 E GV FD120D 3 45 Module 1 GV FD120D gt Input GV FD120D GV FD120D GV FD120D GV FD120D All System 1D Name Telephone H Telephone 0 Mobile Phone E mail Address Figure 3 1 The controls on the VSM window No Name
40. 9 appears Select the Automatic Failover Support option This dialog box appears Automatic Failover Support Server IP Serer Pot Port ideo Server Iden 1 192 168 0 226 21112 5551 Please add one or more Dispatch Server for redundancy 1 purpose in case this server is not available or was offline Figure 2 16 Click the Add button The Setting dialog box Figure 2 13 appears Type the IP address of the failover server and change the default port settings if necessary a Dispatch Server 6 Type Identification Code matching to that in CenterV2 Identification Setting If the information is inconsistent the connection to the failover server cannot be established s Dispatch Server Setting Network setting zn ot JE o Cl Autorun server service upon startup C Automatic Failover Support Allow unidentified CenterV2 Server login Identification Code Dispatch Setting Group First Dispatch Log Keep Days 30 Log Path D Dispatch Log Available space 19 70 GB CenterV2 Event Log Enable Real Time Center 2 Event Keep Days 30 Log Path D Dispatch CenterV2Log Available space 19 70 GB ye HRecyde Log L_ __ Server IP 192 168 3 170 Server Port 21112 Default Port GV IP Device Identification Code Figure 2 17 Note Once the primary server is ready to resume the services it is required to close the failover server so the connection from subscribers can
41. Assigns an input device to be the panic alarm button m Trigger by I O Assigns an input module and a pin number Output Module Enables an assigned output module when the panic button is pressed For the example of Figure 1 15 when the panic button Module 1 Pin 1 is pressed the output module Module 3 Pin 4 will be triggered simultaneously Send which Camera s to Center V2 Select which camera video should be sent to Center V2 when the panic alarm button is pressed 32 a Center V2 1 5 3 Detecting Input Status The feature is designed to monitor all inputs for a change of state whenever the subscriber starts the live monitoring through Center V2 A change from the previously defined state N O to N C or N C to N O will activate an alarm condition Click le in the Connect to Center V2 dialog box Figure 1 8 For details see nput State Detection Chapter 6 GV DVR User s Manual on the Software DVD 33 C GeoVision 1 6 Live View By default live views are popped up on the Center V2 when events and motions are detected at the subscriber You can also enable live views to be shown constantly on the Center V2 To enable live view of any camera 1 oo 2 E 34 The GV System needs to grant the Center V2 the privilege to allow live viewing On the GV System click the Network button select Connect to Center V2 click Configure and select Advanced Settings and click the Camera tab The Advanced Setti
42. CRYV5232 650 MB J v CD DYD Burning Software OCD Using OS Burning 2 Media Information used Size 190 48 MB Free Size 459 51 MB Total Size 650 00 MB Erase Rewritable Disc Figure 1 51 m Using CD DVD Click to back up files to the CD or DVD using the third party software Click the button to assign the desired burning software exe file CD Using OS Burning This option is only available when you use Windows XP Server 2003 Vista or Windows 7 It burns files to the CD or DVD using the inbuilt software of the operating system Note that your hard disk needs at least 1 G buffer space 74 fa Center V2 1 14 4 Setting the Event Log On the Center V2 window click the Preference Settings button No 8 Figure 1 1 and select Event Log Setting to display the following dialog box Event Log Settings Event List Auto Import Days Event Log Keep Days T 2 V Recycle W Log Path CACenterAEventLog O available 5 85 GB lt lt Figure 1 52 Event List Auto Import Specify the number of days for which the logs are loaded to the Event List at the bottom of the Center V2 window Figure 1 1 and the Event Log Browser Figure 1 47 Event Log E Keep Days Select this option and type the number of days to keep log files Otherwise clear the option to keep log files until the Recycle starts or the storage space is full m Recycle Delete the files of th
43. Configuring a Virtual GV I O Box On window menu click Configure and then select Virtual I O The Virtual I O Device dialog box appears For setup details see Configuring a Virtual GV I O Box in 1 17 Output Alerts 3 14 3 Triggering Outputs by Event Click Configure on the window menu and select Notification The Alarm Settings dialog box appears For detail see Triggering Outputs by Event in 1 17 Output Alerts 184 a Vital Sign Monitor 3 14 4 Triggering Outputs Manually 1 Click the I O Device button 1 on the VSM window This dialog box appears Force Output of I O Device Module TETCh Output WR RRBs SRS sssaes Figure 3 19 2 Select a desired module and then click the Finger button ic to trigger the output You can also trigger the output devices installed at the subscriber site by using the Force Output button O on the Subscriber Status For details see I O Device Viewing Subscriber Status 3 7 Subscriber Monitoring 185 C GeoVision 3 15 SMS Alerts This feature lets you send out SMS messages to subscribers when alert conditions occur 3 15 1 Setting SMS Server Before sending SMS messages to an individual subscriber you need to define SMS Server correctly Click Configure on the window menu and select SMS Setup For setup details see 1 18 SMS Alerts 3 15 2 Sending SMS Once the connection betwee
44. Connections This window appears 16 x File Edit View Favorites Tools Advanced Help ay Q Back GD wi Fo Search gt Folders Sy XxX i Ez Address Network Connections S S i j HRE Name type Status Device Name Phone or Host Address Owner T Network Connections LAN or High Speed Internet Local Area Connection LAN or High Speed Inter Connected Realtek RTL8139 Family System Figure G 1 Right click one Local Area Connection select Properties and click the Advanced tab This dialog box appears Click Settings _ Local Area Connection Properties ajx General Authentication Advanced Windows Firewall Protect my computer and network By limiting or preventing access to this computer from the Internet Figure G 2 205 GeoVision 3 Click the Exceptions tab This dialog box appears Windows Firewall O File and Printer Sharing M Remote Assistance 1 Remote Desktop Figure G 3 4 Select UPnP Framework and click OK 206 Appendix H Supported IP Device Brands and Protocols The supported third party IP device brands and protocols are listed below For detailed information refer to Supported IP Camera List on GeoVision s Website http www geovision com tw english 4_21 asp Arecont Vision Messoa oo CNB Samsung o Samsung D Link EtroVision SONY UDP HUNT Verint Vivoteck Note Thes
45. Dispatch Log V keep Days 30 Log Path D Dispatch Log Available space 19 70 GB CenterV 2 Event Log Enable Real Time CenterV2 Event Keep Days 30 Log Path D Dispatch Centerv2Log Available space 19 70 GB zj M Recycle Log Figure 2 13 137 GeoVision Network Setting Server Port The port should match with the Dispatch Server Port of Center V2 Figure 2 7 Or keep the port setting as default To automatically configure these ports on your router by UPnP technology click the Arrow button For details on UPnP settings see UPnP Settings Appendix Allow GV IP devices to login as subscriber from port Enables the connection to the GV Video Server GV IP Camera and GV Compact DVR The default port is 5551 or modify it to match the Center V2 port on the GV IP devices For details see GV Video Server User s Manual GV IP Camera User s Manual or GV Compact DVR User s Manual Auto run server service upon startup Automatically starts the Dispatch service when its program starts Automatic Failover Support Distributes Center V2 Servers to another Dispatch Server when the serving Dispatch Server breaks down Enabling this item you will be prompted to enter the IP address and port of another Dispatch Server For details see 2 17 Failover Server Allow unidentified CenterV2 Server login Allows Center V2 to access Dispatch Server without entering the Identification
46. Emergency ha V Output Module Mod 1 v Pin 1 Event Type Emergency a Output 1 M Allow Center 2 to force output Security Service Momentary Mode V Start monitoring normal events when the selected pin is triggered V Stop monitoring normal events when the selected pin is triggered C Maintained Mode C Schedule Mode Figure 1 12 I O Device Mod 1 Pin1 v Mod 1 gt Pini gt Notifies the Center V2 of when I O devices are triggered Use the Arrow buttons to configure each I O device or click the Finger button to apply to all I O devices Allow Center V2 to Enable Disable I O Allows Center V2 manually arm disarm any I O devices at the subscriber s site without interrupting the monitoring For example when an alarm is triggered at the subscriber site the Center V2 operator can turn it off remotely before the security staff arrives at the site Meanwhile GV System still remains on monitoring E Send to Center V2 when I O is Triggered Notifies Center V2 when any selected input is triggered 28 a Center V2 With Camera s Sends the camera video to Center V2 when the selected input is triggered Click the Set Camera s button to assign cameras for the application Event Type If the subscriber wants Center V2 always to get notified of the input trigger select Emergency If the subscriber wants Center V2 to get notified of the input trigger only when an assigned input is tri
47. Figure 1 1 The Address Book window appears Highlight one subscriber and click the Subscriber Schedule No 7 Figure 1 2 The Schedule window appears amp Schedule Figure 1 35 55 C GeoVision 56 On the Schedule window menu click Schedule select Setup Wizard and follow the Wizard instructions When the following dialog box appears during the instructions drag the mouse over the Login timeline to define the Start and End time Figure 1 36 The controls on the Setup Wizard No Name 1 Include 2 Exclude 3 Add 4 Erase 5 Advanced Setting Timeline Login Notification Description Displays task time Displays non task time Draws task time Erases task time Selects alert notification methods See Scheduling Alert Notification later Defines the time periods Displays the Login timeline Displays the E mail and SMS timelines Click Next when you finish the schedule The Setup Wizard dialog boxes pops up again and then click Finish to exit fa Center V2 1 11 2 Scheduling Alert Notification E mails and SMS messages can be sent out within the scheduled period of time The Schedule will work with your E Mail and SMS settings to all alert conditions To set up alert conditions see Notification Settings later in this chapter Note Once you enable the schedule function you will not be notified when events occur outside the scheduled period of time 1 On the Schedule window
48. Information cccccccceeeeeeeeeeeeeeeeeeeeeaaeeees 96 E Mail Alerts sosie aaa a 98 1 19 1 Setting Mailbox scccciccccccccccecccccceseckentenccccececccciddadadiciasesicccceiiadis 98 1 19 2 Sending E Mail nnnnnnnnnnnnneeeeeerrrrrrrrrerrrrrrrrrrrrrrrererereeereene 100 1 19 3 Inserting Device InformatiOn cccceeeeeceeeteeeeeeeeeeeeeeeeees 100 EM ap AICS ara E 101 1 20 1 The Remote E Map Window ccccccccccssseeseeeeeeeeeeeeeeeeees 101 1 20 2 Configuring the Remote E Map ccceeeeeeeeeeeeeeeeeeeeeees 103 Event Chait esrara E 105 1 21 1 Accessing the Event Chart cccccccccsssseseessseeeeeeeeeeeees 105 1 21 2 Event OE ac cetrnapannenanancneacormeunsanveacacneetnocmumestsnunananiacuprcncunr 108 1 22 Failover SGNVel ccancsnieyetinsicnascwecuresnisn uaa theauetornetoeulenutenue 109 1 23 Assigning a Subscriber to Another Center V2 111 1 24 Channel Display on Another Monitor ccccsseeeeseees 112 Chapter 2 Dispatch Server cccceeeceseeeeeeseeeeeeeeeeeeseeeeeenees 113 2 1 Minimum System Requirement cccccssseeeseeeeeeeeeeees 114 2 2 Meala 116 2 3 The Dispatch Sever WiINdOW ccccscecsseeeeeeeseeeeeeeeeaees 117 2 4 Subscriber ACCOUI iaiciisocticutveusaocapiaundensacnialauiaonmieuees 119 2 9 SVICE SIUD ciirsa aaa Sai 122 2 6 Connecting Center V2 to Dispatch Server 0008 124 2 7 Connecting GV System to Dispat
49. Q FAUNE The Vision of Security GV CMS Series User s Manual V8 5 9 0 CSV8590 A Q eee C GeoVision 2014 GeoVision Inc All rights reserved Under the copyright laws this manual may not be copied in whole or in part without the written consent of GeoVision Every effort has been made to ensure that the information in this manual is accurate GeoVision Inc makes no expressed or implied warranty of any kind and assumes no responsibility for errors or omissions No liability is assumed for incidental or consequential damages arising from the use of the information or products contained herein Features and specifications are subject to change without notice GeoVision Inc 9F No 246 Sec 1 Neihu Rd Neihu District Taipei Taiwan Tel 886 2 8797 8377 Fax 886 2 8797 8335 http www geovision com tw Trademarks used in this manual GeoVision the GeoVision logo and GV series products are trademarks of GeoVision Inc Windows and Windows XP are registered trademarks of Microsoft Corporation January 2014 Contents Ghapter 1 Center VZarcsrninunan a 1 1 1 Minimum System Requirements ccccsseeseseeeeeseeeeeeeeenees 2 ta Installa Oms i 4 1 2 1 Standard Version ccsssssssccnssssccsssssesanssencnnesensssesscsonnnsenonnnssosssssssnen 4 1 2 2 Professional Version wicccisccccccccccccccdecenencesscecenecesisieceiianesiddeesesane 4 1 3 The Center V2 WINK OW ccceseeeeeeeeeeeeeeseaeeensane
50. Settings button beside This dialog box appears Record Settings Attachment Mode Record Option per camera Pre Rec Total Frames 10 amp B Pre Rec Frames Sec Limitation 2 H Motion Frames Sec Limitation 5 i Recording Quality Normal Attachment Option Record by Motion Max Video Clip Post Rec Motion Alerts Interval Attachment Option Record by KO Trigger Max Video Clip Post Rec Motion Alerts Interval Subscriber s Recorded Files Event Type Pre Event Att Post Event At C video signal has resum 0 0 Intruder 15 15 C Missing Object 0 0 C Unattended Object 0 0 C Crowd Detection 0 0 lt Note Up to 15 minutes of pre event or postevent recording can be attached Figure 1 5 16 a Center V2 Record Options per camera Pre Rec Total Frames Determines the total pre recorded frames in a video attachment Pre Rec Frames sec Limitation Determines the frame rate in the pre recorded period Note Dividing the Pre Rec Total Frames by Pre Rec Frames Sec Limitation you will get the total time of the video attachment Motion Frames sec Limitation Determines the frame rate of the video to be sent as an attachment Recording Quality Use the slider bar to adjust the video quality in 3 levels Attachment option Record by Motion Defines the duration of the video attachment delivered upon motion Max video Clip Determines the dura
51. Startup type PTZ Maximum Speed Monopoly mode Joystick Control Device 1 Device 2 Device 3 Device 4 Device 5 Device 6 Device 7 Device 8 Figure E 1 2 For the connected GV Joystick V2 select GeoVision Joystick from the Device drop down list 3 Click the Start Service button gt Figure D 1 and then you can use the GV Joystick V2 to control the PTZ camera 4 If more than one GV Joystick V2 is connected repeat Step 2 to set up and use another GV Joystick V2 203 C GeoVision F Image Size on Center V2 See the table below for the image size on Center V2 base on the source size from the subscriber and the size setting on Center V2 e wxw oxo oo oo oonan sxa asaxaso asoxaso asera asera 2048 x 1944 352 x 288 704 x 288 704 x 576 2048 x 1944 2560 x 1920 320 x 240 640 x 240 640 x 480 2560 x 1920 Figure F 1 204 Appendix G UPnP Settings The Center V2 Dispatch Server and VSM support UPnP technology Universal Plug and Play to allow automatic port configuration to your router In order for UPnP to be enabled the following requirements must be met Windows XP Service Pack 2 or above Windows XP must be configured to use UPnP see below UPnP must be enabled on your router consult your router s documentation To enable UPnP in Windows XP 1 2 Go to Windows Start click the Start button select Settings and select Network
52. aaannereceeeesacneesasuseeeeernennnsiad 52 1 10 4 Viewing Subscriber Information cccecceeeeeeeeeeeeeeaeeeees 54 1 10 5 Disabling Subscription ccc cc eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 54 1 11 Subscriber Schedule 0cccccicccccscsencecssvssscasecseweasecssweanecieens 55 1 11 1 Setting a SCNG QUIS Gccscsiccscececccdessssacccaacececeacccdecnssccnnncsceccasecbinds 55 1 11 2 Scheduling Alert Notification ccccccccseeessseeseeeeeeeeeeeeeees 57 L12 Alarm ROD OW aiaa a 58 1 12 1 Creating an Alarm Repott ccccccceeeeeeceeeeeseeseeeeeeeeeeeeeeees 58 1 12 2 Editing Alarm Report Categories cccceeeeeeeeeeeeeeeeeees 60 1 12 3 Printing Alarm Reports ccccccceececeeseeeeeeeeeeeeeeeeeesaeaeaaeeees 61 C GeoVision 1 13 1 16 1 17 1 20 1 21 Event LIS l sticatscccasaccabinwaterniaraecsaiamntesnsstosesiaretancetaee eiawateneas 62 1 13 1 Marking the Events with Colorful Flags ccccceeeee 62 1 13 2 Using the Event Tabs tesstiiansccinssiraneranetenaqneanncanaaaiciananenieccns 64 1 13 3 Setting Alert Levels of Event Messages cccccceeeeeeeees 67 Event Log Browse sciscssesacdoesesncsesaictetoestcatleeresindgereccccamuactocs 69 1 14 1 Opening the Event LOg cccccccccececeeeeseessseeeeeeeeeeeeeneneeees 70 1 14 2 Filtering the Event LOG ccccccceececeseeseessseeeeeeeeeeeesenaeeees 71 1 14 3 Backing up the Event LOG
53. age 1 Enlarge path threshold Keep days Enlarge recycle threshold Use Digital WWatermark Protection Figure 1 57 mM Recycle When 1 to 49 channels are connected to the Center V2 Server and the storage space falls short of the recycle threshold 800 MB default recycle threshold 400MB of old files will be deleted This recycle size increases by 100 MB with every addition of 50 channels That is with 50 to 99 channels connected 500 MB of the old files will be deleted as the storage space falls short of the recycle threshold See the following table for the corresponding recycle size 83 GeoVision No of Channels Connected to Center Recycle Size MB V2 Server 400 84 50 99 500 Storage Group You can store the recordings of different subscriber at separate locations using the storage group feature For details see the following section Storing Video Files in Separate Locations Enlarge Path Threshold When the space in a storage path falls short of the path threshold 500 MB by default recordings are saved to the next path of the same storage group To enlarge the path threshold select this option and specify the path threshold To add paths see the following section Storing Video Files in Separate Locations Keep Days The recordings are stored for the specified number of days before they are recycled Enlarge Recycle Threshold When the current storage path falls short of the recycle thr
54. al Sign Monitor 3 13 3 Event Log Settings Click Configure on the window menu and select Event Log Settings to display the Event Log Settings dialog box The settings are the same as those in Center V2 For details see Setting the Event Log in 1 14 Event Log Browser Also see 3 13 Event Log Browser 181 C GeoVision 3 13 4 Notification Settings When alert conditions occur the VSM can automatically activate the assigned computer and output alarm to notify the operator while an SMS and an e mail message are being sent out to subscribers To configure this function click Configure on the window menu and select Notification to display the Alarm Settings window Alert Approach E Minimum Duration This option is only available for Camera Motion Connection Lost and Video Lost alerts The minimum duration is the minimal time period that the event must persist for VSM to be notified by alarm output e mail and or SMS Select this option and click the Edit button to type the minimum duration The default is 3 seconds Note For Video Lost alert the minimum duration function is used to exclude video lost alerts from cameras that resume connection to GV System instantly after they disconnect The other settings are the same as those in Center V2 For detail see 1 16 Notification Settings Also see 3 15 Output Alerts 3 16 SMS Alerts and 3 17 E Mail Alerts 182 a Vital Sign Monitor 3 13 5 Alerts Interval Settings Yo
55. amera 2 Live 5 5 2011 6 33 30 PM 5 5 2011 P g DVR2 Attachment Record file of Camera 1 Live 5 5 2011 6 33 30 PM 5 5 2011 B DVR2 Motion Camera 1 detected motion 5 5 2011 6 34 28 PM 5 5 2011 2 DYR1 Motion Camera 2 detected motion 5 5 2011 6 34 28 PM 515 2011 6 34 28 g DVR1 Attachment Record file of Camera 2 Live 5 5 2011 6 34 35 PM 5 5 2011 6 34 28 P g DVR2 Attachment Record file of Camera 1 Live 5 5 2011 6 34 35 PM 5 5 2011 8 39 07 PM Attachment Record file of Camera 2 Live 5 5 2011 6 35 23 PM 5 5 2011 6 35 17 PM Attachment Record file of Camera 1 Live 5 5 2011 6 35 23 PM 5 5 2011 8 39 56 PM An T system Motion Trigger Connection Alarm Login Logout Attachment Wiegand Data Devicd Lost Offline Event Customi gt E SA 14 16 T 17 18 19 20 21 22 Figure 1 1 The controls on the Center V2 window Monitoring 1 Displays live video Window Indicates the date time remaining disk space and 2 Status Panel the total number of online channels versus available channels Type the desired ID in the Current Subscriber field 3 l Find A SMpsaniber and click this button to search GeoVision No Name 10 11 Subscriber List Tools Host Information Accounts Preference Settings Previous Page Next Page Description Displays subscribers ID names and online status Blue Icon Indicates the subscriber is online Gray Icon Indicates the subscriber
56. ar the corners Use the Wide Angle Lens Dewarping feature to correct image distortion iP On EZ player right click the video image and select Wide Angle Lens Dewarping to enable this function 39 C GeoVision 2 40 Right click the video image again and select Wide Angle Lens Dewarping Settings The dialog box appears Wide Angle Dewarping Setting is L Xe Ss r Zr r r I Figure 1 22 Move the slider at the bottom to correct the degree of distortion The adjusted view is shown on the right Click OK to complete a Center V2 1 8 2 Remote Playback You can play back the video events recorded on the remote subscriber through network connection The function is critical when you do not want to enable recording on the Center V2 but want to retrieve the videos for reference For the remote playback to work the following function must already be enabled on the subscriber e GV System Remote ViewLog Service e GV Video Server ViewLog Server e GV Compact DVR ViewLog Server Note The Remote ViewLog option is not available for the events already having recorded files on the Center V2 the events with attachments 1 Double click an event without having the attachment in the Event List This dialog box appears CenterV2 ID 1 Time 8 9 2003 4 15 46 PM Message Camera1 detected motion Figure 1 23 41 C GeoVision 2 Click the Remote Playback button This dialog box app
57. atch Login logout Server CenterV2 Server IP CS_IP disconnects from Dispatch Server abnormally CenterV2 Client login CenterV2 Client logout CenterV2 Server IP CS_IP is disconnected by Dispatch Server CenterV2 Server changes IP from CS_old_IP to CS_new_IP CenterV2 Server IP CS_IP is transferred to another Dispatch Server DS_IP DS_ Port Connection 135 C GeoVision Status Message Control CenterV2 Server CS_Name is enabled CenterV2 Server CS_Name is disabled ID login_ID is dispatched to CS_Name IP CS_IP Invaild Dispatch login ID Invaild login Password This account has already logged in There is no server online for CenterV2 Client All online CenterV2 Servers have utmost service 2 14 2 Event Log Browser The browser lets you view and locate the real time events from Center V2 Servers Click View on the window menu and then select Event log to display Event Log Browser For details on Log Browser see 1 14 Event Log Browser 136 a Dispatch Server 2 15 System Configuration To configure Dispatch Server click the Server Setting button No 3 Figure 2 1 on the toolbar to display the following dialog box s Dispatch Server Setting Network setting Server Port 21112 Default D C Autorun server service upon startup Automatic Failover Support Allow unidentified CenterV2 Server login Identification Code kkk k Dispatch Setting Group First O Balance Only
58. backing up logs see Backup Settings later in this chapter 1 14 2 Filtering the Event Log You can filter log events on the defined criteria Click the Filter button No 4 Figure 1 47 to bring up the Filter window vJ ID V Message ystem v Message Time v Start Time ODate OTime Both ODate OTime Both 11 82006 wv 16 03 35 117 sr2008 w 180335 S 11 s2008 wi 1603 35 11s s2008 v 160335 S sadn Comare Read kii 8 Message Message Time Start Time No We All Yes 11 8 2006 16 03 35 1 11 8 2006 16 03 35 1 Figure 1 49 m Read Searches for the events you have opened on the Event List that is at the bottom of the Center V2 window E Clipboard Searches for the events with alarm reports The_licon indicates the report has been completed The icon indicates the report has not been completed or ended The icon indicates the above two types of reports m Flag Searches for the flagged events Clip Searches for the events containing video attachments m ID Searches for the events from a specific subscriber 71 C GeoVision m Type Searches for the events based on the nature of events Message Searches for the events by keywords E Message Time Searches for the events by the arriving time or date to Center V2 Start Time Searches by the starting time of the events occurred at the subscriber site Applying Multiple Filters This option allows you
59. ber s contact information in the rest of fields optional gt Ifyou wish to send e mail alerts to this subscriber type its e mail accounts Up to two e mail accounts can be created for the subscriber For e mail settings see E Mail Alerts later in this chapter gt Ifyou wish to send SMS alerts to this subscriber type its country code and mobile numbers Up to two sets of mobile number can be created for this subscriber For SMS Server settings see SMS Alerts later in this chapter Click OK to save the above settings This dialog box appears Subscriber Settings 1 Monitor Option Image Size Norma _ Yy V Auto Record Video Record Mode O Attachment Mode Both Live amp Attachment Note Any changes ofthis property will be applied in next trigger Color of Channel Caption Storage Group Storage 1 v Figure 1 4 Assign a Storage Group using the drop down list For details see Recording Settings 1 15 System Configuration The options in the dialog box are discussed later You may accept the default settings here and edit them later by clicking the Subscriber Settings button No 7 Figure 1 2 on the toolbar After you click OK the subscriber account will be created a Center V2 1 4 2 Subscriber Settings Monitor Option Image Size Sets the size of video size from the subscriber Each size set from the subscriber corresponds to a certain size displayed at the Center V2 Server F
60. ch Server a s 125 2 8 Connecting GV IP Device to Dispatch Server 126 2 9 Setting a Primary Center V2 Server cccsseeeeseeeeeeeeeeees 129 2 10 Event QUETY ieee tie cise ar ovine tes rai ese eee 130 EI EVENS asec teen canara ewan ern erosawa 131 2 12 Subscription Schedule ccccccccscceseeeeseeeeeeeseeeeseeeeeaees 133 EAS EV VW igo sheees ceed toontiue E E resemse 134 2 14 LOG BIOWSON siosio 135 2 14 1 Dispatch Log BrowSel ccccccccsssssssssssseeeeeeeeesesseeesssseeeees 135 2 14 2 Event Log BrOWSeM sscssssssssceneernninenssaniaisdccaiitccsennnecccintaaaands 136 2 15 System Configuration cccccseceeeseeeeeeeeeeseeeesseeessaeeeneas 137 216 SIMS ACIS orne a a aE 140 217 E Mail ACIS nosas aaa 141 2 18 Event Chart wecicrictindecncadavnuniniitocsnseavauceniiensuidanauintiuventeuanunns 142 2 19 Failover S rver cccccccecceeseseesnecesceseuseususaueaeeeueueeusausausas 144 Chapter 3 Vital Sign Monitor cccccseeeeseeseeeeeeeeeeeeeneeeeneees 146 3 1 Minimum System Requirements cccsccccceeseesseeeeeneeeees 147 32 Mtalaa ON saesson iaaa 149 3 3 The VSM WindOW sasssssssnsnnnnnnnnnnnnnnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnne 150 3 4 Subscriber Account ssa saasnnssnenennnnnnnnnnnnnennnnnnnnnnennnnnnnnnnnn 154 3 9 SOVICE StAmMUP tecccacsciiaci cocens iu esnteiroouscareectaticnauediresouniecnsoua 155 3 6 Connection to VSM os cunciescusintu ce inbariets Swed srtue
61. cted event types under a single tab With only a click of the Customized Event tab you can monitor the desired events instantly 1 On the main screen click Configure and select Customize Message Settings The Customize Message Settings dialog box appears 2 Select a desired event from the left and select Add to Customized Event Tab Customize Message Settings Camera Motion Video Lost VO Trigger KO Module Lost Connection Lost Disk Full Login Logout Start Service Stop Service Multicam Surveillance System is abnormally c The storage for Event Log is low Event Log w GY l O Module is not found Video signal has resumed The input module is reconnected The input status is changed Failed to Login SMS Server Failed to send SMS Text Color Assign By Priority High Customize Color E Sample Sample Tet M Add to the Customized Event Tab Figure 3 15 3 To add other event types into the Customize Event tab repeat step 2 4 On the main screen click View select My Favorite Events and select Customized Event to add this tab to the main screen 175 C GeoVision 3 11 3 Setting Alert Level of Event Messages You can assign an alert level to each event type for monitoring and management purposes Each alert level can be distinguished by color You can customize the color for each alert level or assign a color exclusively for a particular event type On the main screen click Confi
62. cted pin is triggered Mod 1 _ Pin 1 M Stop monitoring normal events when the selected pin is triggered Mod 1 Pin 1 C Maintained Mode C Schedule Mode Figure 3 7 160 Vital Sign Monitor I O Device Notifies the VSM when I O devices are triggered Use the Arrow buttons to configure each I O device or click the Finger button to apply to all I O devices Allow Vital Sign Monitor to Enable Disable I O Allows the VSM manually arm disarm any I O devices at the subscriber s site without interrupting the monitoring For example when an alarm is triggered at the subscriber site the VSM operator can turn it off remotely before arriving at the site Meanwhile GV System still remains on monitoring Notify Vital Sign Monitor when I O is Triggered Notifies the VSM when any selected input is triggered Event Type If the subscriber wants the VSM always to get notified of the input trigger select Emergency If the subscriber wants the VSM to get notified of the input trigger only when an assigned input is triggered select Normal Right Arrow button Sets the delay time to notify the VSM of the input trigger This feature is only available when the Normal type is chosen Exit Delay While the system is activated this feature provides an interval of time for the subscriber to exit the premises During this time the specified input e g an exit entry door is inactive Once the exit delay expires the input wil
63. dewolimersumiuensses 156 3 6 1 Advanced Settings for Subscription 0 0 0 0 eeeeeeeeeeeeeeees 158 3 6 2 Detecting Input Status 2 0 0 ceeeeeeeeeeeeeeeeeeeeeeeaaeeeeeeeeees 166 L GeoVision 3 7 Subscriber MONItoring cscccccsseeeeeeeeeesseeecseeeeseseeneeeeenes 167 3 7 1 Viewing Subscriber Status ccccccceceeceeeeeeeeeeeeeeeeeeseeeeeeees 167 3 7 2 Viewing Storage Information ccccccccceececsseeeeeeeeeeeeeeeeeees 169 3 7 3 Disabling Subscription 2 0 00 eeeeeeeeeeeeeeeeeeeeesaeeeaaaeaneeeeeeees 170 38 Subscriber Schedules aaa 171 29 Alarm Repon risina E 172 3 10 Remote Playback cccccceseeeeeeseeseeneeeeeeseeeeeeneeeeneeeeeesaaes 173 SAI Even List e E a 174 3 11 1 Adding Event Tabs ccuuusssiieeessessveseituiauiiiieassiacsiaaiiissadidissseans 174 3 11 2 Setting up the Customized Event Tab cere 175 3 11 3 Setting Alert Level of Event Messages eeecceeees 176 3 12 Event Log BrowSe r cccccccceeeeeeeeeeeeeeeeeeeeeeeesseeeeneneneesaaes 177 3 13 System CONTGQUIATION vesiaieicsicnsiaiormnadeiecdinemurartiamaionws 178 ro Wag 2S Pal Eo oo 16 8 oars ee eee rte eerer rer 178 3 13 2 Password Settings cccccccccssseeeeeeeeeeeeeeeeeeeaaeeseeeeeeeeeeeeeees 180 3 13 3 Event Log SCUINGS uc ccc ccscccccsecccccsiciccceeniaceeecisiicenuvddieccdsddctinnds 181 3 13 4 Notification Settings cc cceseeeeeeeeeeeeeeeeeeeeaeeeeeseseeeeeees 182 3 13 5 Alerts Inte
64. dow appears Vital Sign Monitor ID 3 Time 6 6 2005 1 04 21 AM Message Camera detected motion gog Figure 3 13 Click the Remote Playback icon A setting dialog box appears Select the desired camera to be viewed enter the ID and password to log in the DVR and click OK The Remote Playback window appears For the controls on the Remote Playback window see 1 8 2 Remote Playback 173 C GeoVision 3 11 Event List On the bottom of the VSM window events can be sorted under different tabs according to the type You can utilize these tabs to quickly monitor events by type You can also configure the Customized Event tab which contains self chosen event types 3 11 1 Adding Event Tabs You can add event tabs to sort events by type 174 On the main screen click View and select My Favorite Events A sub menu appears My Favorite Events d v System v Subscriber List Trigger Connection Alarm Login Logout Toolbar Wiegand Data v Status Bar v Device Lost ag v Offline Event v Customized Event v Subscriber Bar v Subscriber Business Card Subscriber Information Figure 3 14 Select the desired event The selected event type should appear as a tab at the bottom of the main screen To remove the event tab from the main screen repeat steps 1 and 2 to unselect a Vital Sign Monitor 3 11 2 Setting up the Customized Event Tab You can configure the Customized Event tab which groups the sele
65. e IP brands and protocols are supported by GV System and third party IP devices can only be connected to Center V2 Dispatch Server and VSM through GV System 207 C GeoVision I MultiLang Tool for Translated Text The user interface has been translated from English into 30 other languages If you find the translation to be unsuitable and would like to correct it you can use the MultiLang Tool to revise the translation Next you can apply the revised text to the applications and export an exe file to make the same revision on another computer You can also send the revision back to GeoVision to have the revision included in future software releases Note When using the MultiLang Tool it is recommended to revise an entire sentence at a time instead of simply searching a single word and replacing the word in all other strings To revise the translated text 1 To install MultiLang Tool insert the Software DVD and select Install GeoVision Supplemental Utilities 2 Click GV MultiLang Tool and follow the on screen instructions Close all GeoVision applications first and then double click MultilingualConfig exe This dialog box appears Q MultilingualConfig E js Language Tools Version Multilingual Text Figure l 1 208 Appendix 4 Click Language and select the language of the text you want to revise 5 In the Search field type all or part of the text in English or the target lang
66. e oldest day when storage space is lower than 500 MB m Log Path Click the button to assign a storage path 15 C GeoVision 1 14 5 Printing the Event Log You can print out the filtered log events define footers and headers for each printout and choose whether to attach the Alarm Report with the data logs 1 On the Event Log Browser click the Page Setup button No 8 Figure 1 47 to display this dialog box 2 Select the options and type the information that you want to print out 3 Click OK to apply the settings 4 Click the Print button No 9 Figure 1 47 to start Creator Event iss From 5 29 2004 10 5 29 2004 Fyentiogoomer User defined text momore E aag 7s Bele a _ e 6 ID Type Message vr N ne Events is System System Start Service a ove Wik System System Failed to enable directdraw stretch function pogin Logout odj Page Setup v Creator GeoVision v User defined data Monthly report Footer Print time Option V Print Alarm Report 1 Device L Video signal of Camera 1 ha 4 1 i 1 evice Lost ideo signal of Camera 1 has resume aww aun Print time and date Motion Camera 1 detected motion Printout Figure 1 53 76 a Center V2 1 15 System Configuration On the Center V2 window click the Preference Settings button No 8 Figure 1 1 and select System Configure to display the following Preference wi
67. e one ofthe selections below User s SM Administrative Rights Figure C 2 2 Click the Next Step button gt The Save As dialog box appears 3 Select the destination drive to store the backup file When the backup is complete this message will appear Successfully Backup VSM Server Settings 200 Appendix Restoring the System You can restore the current application settings with the backup of configuration file Also you can copy this backup file to configure another application at different site with the same settings as the current application 1 Open the backup file exe you previously stored A valid ID and password are required to display this window Fast Backup amp Restore MultiCam System Fast Backup amp Restore Digital Surveillance System s Settings Please choose one ofthe selections below User s a Restore MultiCam System or aie nee E o Restore Defaults Piel Restore Remote AP Figure C 3 2 Click the Restore Remote AP icon and then select the application that you want to restore its backup settings For example we select VSM Server for restoration Click the Next Step button to start restoring When the restoration is complete this message will appear Successfully Restore VSM Server Settings 201 C GeoVision D Watermark Proof Watermark Proof is a watermark checking program by which you can verify the authenticity of the recordings 1 Locate and run WMPro
68. e translation revision back to GeoVision f your default mail client is Outlook Outlook Express or Mozilla Thunderbird click Tools Export and Send Report to send the revision f your default mail client is not set up or supported click Tools Export and Export text file and email the exported text file to qvlocalize geovision com tw 211 GeoVision J Specifications Product specifications are subject to change without notice Center V2 Feature Note Maximum of Subscribers standard 5 Maximum of Subscribers professional 500 Maximum of Channels standard 160 Maximum of Channels professional 800 Control of GV Joystick V2 Yes Backup to CD DVD Yes Alarm Reports of Events Yes Notification of SMS Alerts Yes Notification of E mail Alerts Yes Notification of E Map Alerts Yes Automatic Connection Recovery Yes Support for Mega Pixel Resolution Yes Real Time Monitoring Yes Remote PTZ Control Yes Remote I O Control Yes 212 Dispatch Server Feature Maximum No of Channels Maximum No of Subscribers Maximum No of Center V2 Maximum No of Sensors Alarms Real Time Audio Monitoring Remote PTZ Control Remote I O Control Auto Recording Event List Viewer Event List Filter Dual Monitor Support Network Load Support Automatic Connection Recovery Appendix Note 40 000 25 000 50 3 600 000 Yes No No No Yes Yes No Yes Yes 213 GeoVision Comparison of VSM and Center V2 Pro F
69. ears CenterV2 Camera Camera 1 ID 1 Password e Save password 127 0 0 1 5552 DST Rollback Figure 1 24 3 Select a camera Type the ID password and IP address of the connected subscriber Keep the port as default value 5552 or modify it to match the related port on the subscriber If you want to play the video events recorded during the Daylight Saving Time period select DST Rollback Click OK This player appears cr 1 Camera 6 Figure 1 25 42 a Center V2 Move to prev 1 min Playback scroll Move to prev 5 min Pause E Move to next 5 min Stop Move to next 1 min Home End Backward Forward Right click the Playback window to have the following features Functions Name Play Mode Render Frame by Frame Plays back video frame by frame Real Time Plays back video on real time This mode saves waiting time for rendering but drop frames to give the appearance of real time playback Key Frame Plays back video with key frames only Smooth Playbacks Evenly distributes 30 frames per second When the playback appears choppy select this option to enhance the smoothness Audio Turns on or off the video sound Auto play next 5 minutes Plays back video up to 5 minutes Deinterlace Converts the interlaced video into non interlaced video Scaling Smoothens mosaic squares when enlarging a playback video and applies the colorful mode to en
70. eature VSM Center V2 Pro Subscriber 1 000 500 Group Yes Yes Bandwidth 4Mbps 25Mbps Record Mode No Live Attachment Both Live Subscriber Status Yes No Auto Login Yes Yes I O Control Yes Yes SMS Message Yes Yes Time Synchronization Yes Yes Keep Day Notify Yes No Event Message Yes Yes Notification Setting Yes Yes Event Log Yes Yes Connection Lost Detection Yes Yes I O Device Support Yes Yes Subscriber Storage Info Yes No 214
71. ed motion a 1 Motion Camera 1 detected motion 1 Motion Camera 1 detected motion Login Logout Attachment Wi Display on Another Monitor Figure 1 44 66 a Center V2 1 13 3 Setting Alert Levels of Event Messages You can assign an alert level to each event type for monitoring and management purposes Each alert level can be distinguished by color You can customize the color for each alert level or assign a color exclusively for a particular event type Note This feature is only supported by the Professional version using a GV USB dongle Camera 1 System Camera 9 ange Beh Camera 15 OS ca Device Lost Device Lost Motion Attachment Device Lost Attachment Attachment Attachment Motion Motion Device Lost Device Lost Ata mt acnme Motion CEES annain Camera 4 Video Lost Camera 14 Video Lost Camera 9 detected motion Record file of Camera 1 Live Video signal of Camera 4 has resume Record file of Camera 2 Live Record file of Camera 9 Live Record file of Camera 4 Live Camera 2 detected mation Camera 1 detected motion Camera 2 Video Lost Video oe of Camera 14 has resume rr Camera 7 Camera 16 Attachment Figure 1 45 Apr 14 38 06 20 15 GB i tn x lt i wag Camera 24 Message Time 5 11 2011 3 46 37 PM 5 11 2011 3 46 39 PM 5111 2011 3 46 39 PM 6111 2011 3 46 41 PM 5111 2011 3 46 41 PM 6111 2011 3 46 42 PM 5111
72. elect ID to query the events based on subscriber s ID and message or Type to query the events based on message types Import Data allows you to query the events based on your previously exported query settings see Step 5 Here we select Type as an example Click the Next button This dialog box appears CenterV2 Event Chart Please select the query items I List all exist data System Motion O Trigger Oo Connection Dalarm Login Logout Attachment O Wiegand Data Device Lost Ooffline Event Cancel Figure 1 76 106 a Center V2 Select List all exist data to query all the event types or disable it to select the desired event types You can optionally click Export at the left bottom of the window to export the settings for next time use Export Data Please inputthe name ofthe export data Type Cancel Figure 1 77 Click the Query button to display the statistical chart Note If you select ID or Message to query the events you need to type the subscriber ID or message type you want to query 107 C GeoVision 1 21 2 Event Chart You can click each item on the chart to view more detailed information 08 04 Type E System 13 15 E Motion 12 14 E Login Logout 4 5 Attachment 14 16 E Device Lost 42 49 Figure 1 78 Save Image Saves the chart image 1 2 Copy Image Copies the chart image 3 Preview Previews the chart ima
73. ending E Mail There are several ways to send e mail alerts See the Center V2 window for the following selections On the Subscriber List No 4 Figure 1 1 right click one subscriber and then select Send E Mail This sends the e mail to an individual subscriber manually Right click one display channel and then select Send E Mail This sends the e mail to an individual subscriber manually On the Event List double click one Event Type except Attachment to call up a message window Click the Send E Mail icon on the window This sends the e mail to an individual subscriber manually Click the Preference Settings button No 8 Figure 1 1 and select Notification to display the Alarm Settings window Check the Send E Mail item This sends e mails to subscribers automatically when set alert conditions occur See 1 13 Notification Settings in this chapter 1 19 3 Inserting Device Information The subscriber name and ID can be inserted automatically into your email message when it is sent out For setup details see Inserting Device Information in 1 19 E Mail Alerts 100 a Center V2 1 20 E Map Alerts You can configure an instant E Map alert to lay out the locations of triggered cameras sensors and alarms within a floor plan For this application subscribers must already create their own E Maps using the E Map Editor and activate WebCam Server To access the E Map at the Center V2 right click one online subscriber on
74. eneral The settings define the retry mode between GV System and VSM Advance Settings General Camera 120 Device System Information Startup V Run Remote ViewLog Service Connection Broken Retry Interval 5 Seconds Retry in the background Figure 3 5 Run Remote ViewLog Service Allows the VSM to retrieve the recordings for playback For details see 3 10 Remote Playback Retry Interval Specify the retry interval when the connection is not immediately available Retry in the background Hides the retries in the background 158 a Vital Sign Monitor Camera The settings define the camera conditions to notify the VSM Advance Settings General Camera System Information Camera 1 z Notify Vital Sign Monitor based on the following events Event Event Type O motion Emergency Intruder Emergency M Missing Object Emergency M Unattended Object Emergency M Scene Change Emergency O wiegand Data Emergency M video Lost Emergency MM Counter Alarm Emergency M Crowd Detection Emergency M Advanced Unattended Object Detection Emergency M Advanced Scene Change Detection Emergency M Advanced Missing Object Detection Emergency Counter Alarm In Out 100 Figure 3 6 m Notify Vital Sign Monitor of the monitoring status Select this option to enable the live monitoring through VSM Select one camera and select the alert events that you like to notify the VSM when they occur Click the Finger bu
75. ensaeneneas 5 1 4 Subscriber ACCOUN c cccccceseeeeeseeeeeeseeeeseeenseeeeeenenseeens 10 1 4 1 Creating a Subscriber cceeeeccceeeeeeeeeeeeeeeeeeaeeeeeeeeeeeeeeeeeees 11 1 4 2 Subscriber SCUINGS ve sissscccscctcssccsccssssssanseestiiisssssssitissacemnccccns 13 1 4 3 Attachment Mode Settings ccccccccccccsseseeeeeeeeeeeeeeeeeeeeees 15 1 4 4 Channel Heading cccccecssescceeeeeeeeeeeseneaeessseeeeeeeeeeensesaeeees 19 1 5 Connection to Center V2 sisiisiisisssssccsstawsitisccnassininessnnienaiaes 20 1 5 1 Setting Normal Mode cc cccscsssssesseeeeeeeeeeessseessssseeeeeeeesenes 22 192 Setting Pane ENGIN cities 32 1 5 3 Detecting Input Status ee cceceeeeeeeeeeseeesssssesseeeeeeeeeeeees 33 16 LIVE VICW saccsieraicscasisadseanersnseistiodacosmtocnacaionedivietanneasiiadsnasneennens 34 Gel RECON CUIAG sosiaa 36 Lo PUA AGM ea siesesnsdecceneasesuanc en eeceeaisesnns sas nesu die encetenanuneneusecsnnauneors 37 1 8 1 Attachment Playback cccceeeeeceeeeeeeeeeeeeeaeeeeeeseeeeeeeeeeeeeeees 37 1 8 2 Remote Playback saannnennsseennsennnnttenereeessrrnnnttrrrreeesrensn enn 41 1 9 Two Way Audio cccccescceeeeeeeeeeeseneeeeeeneeeesenesenesenesaneseneaes 45 1 10 Advanced Monitoring and Management c0ssse 47 Te VOD SNOWN TO SUAS a 47 1 10 2 Camera Audio Control Window ccccccessessseeeeeeeeeeeeeeeeeees 49 1 10 3 Camera Monitor rccsisissccstnnctnnanteasaane
76. ents Connects to 100 DVR subscribers or more Windows XP Vista 7 8 Server 2008 Windows 7 8 Server 2008 Server 2012 Core 2 Duo 2 4 GHz 2 x 1 GB Dual Channels AGP or PCI Express 800 x 600 1280 x 1024 ___ recommended 32 bit color 114 Internal or External GV USB Dongle a Dispatch Server Software License 50 Center V2 servers 25000 subscribers from Center V2 servers 2 Dispatch VSM Note It is recommended to use the internal GV USB Dongle to have the Hardware Watchdog function which restarts the PC when Windows crashes or freezes 115 C GeoVision 2 2 installation 116 Connect the GV USB Dongle to the computer Insert the Software DVD to your computer It will run automatically and a window appears To install the USB device driver select Install or Remove GeoVision GV Series Driver and select Install GeoVision USB Device Drivers To install GV Dispatch Server select Install GeoVision Primary Applications Click GV Dispatch Server and follow the on screen instructions a Dispatch Server 2 3 The Dispatch Sever Window 8J Address Book gt Group 1 amp Server Ly 2 gy Group 2 Server 2 Subscriber ID Subscriber Type Last Login Time Last Dispatch Current Dispatch Server Port Client Status 1 600 Enable 4 29 2011 11 45 02 AM Center V2 2 Server 2 Total server list 1 Figure 2 1 The controls on the Dispatch Server window No
77. ers based on predefined groups or balance loading of Center V2 Servers Follow these steps to connect a GV IP Device to the Dispatch Server 1 On the main screen click Configure and select Setting The Dispatch Server Setting dialog box appears 2 Select Allow GV IP devices to login as subscriber from port to allow GV IP Devices to log in as subscribers Change the port when necessary s Dispatch Server Setting Network setting Server Port 21112 Default D C Autorun server service upon startup C Automatic Failover Support Cl Allow unidentified CenterV2 Server login Identification Code ecient Dispatch Setting Group First OBalance Only Dispatch Log Keep Days 30 Log Path D Dispatch Server Log Available space 13 82 GB CenterV2 Event Log Enable Real Time CenterV2 Event Keep Days 30 Log Path D Dispatch Server CenterV2Log Available space 13 82 GB vi 2 MRecycle Log Figure 2 7 126 a Dispatch Server 3 On the Web interface of the GV IP Device click Events and Alerts and select Center V2 Yonnectionl Connection Center V2 in this section you can configure the connection to Center V2 and tasks to perform Center V2 server Activate Link Host name or IP Address 192 168 3 127 Port number 5551 User Name GV FD1200 Password EITT Cease motion detection messages from CI Camera Cease input trigger message from Clinput1 Enable schedule mode g Apply Select schedule time O S
78. eshold 800 MB by default recycle starts To enlarge the recycle threshold select this option and specify the recycle threshold Use Digital Watermark Protection Protects the recording from being tampered by embedding digital watermarks in video streams To verify the authenticity of the recording see Watermark Proof Appendix a Center V2 Storing Video Files in Separate Locations You can keep video files from each subscriber in separate locations using the storage group feature Follow the steps below to set up storage groups and then assign each subscriber with a storage group To add storage paths and set up storage groups 1 Add storage locations using the Add New Path button xl 2 Assign a storage group to each path using the drop down list Preference General Layout Network Record x xl Recycle Fath Free size Storage Zj D CenteryAData Storage 1 A Enlarge path threshold Keep days Enlarge recycle threshold Use Digital Watermark Protection Figure 1 58 Important The system will first save video files to the path that appears on the top of the list and switch to the next path of the same group as soon as the current location reaches the specified path threshold 85 C GeoVision To assign a storage group to a subscriber 1 Onthe Center V2 window click the Accounts button No 7 Figure 1 1 The Address Book window appears 2 Select the subscriber
79. etwork abnormal Fail to login to dispatch server Dispatch server is shutdown Video signal of xx has resumed Module xx has returned to normal Failed to login SMS server Failed to send short message SMS server is shutdown Disk Full Restarted Failed Multicam Closed There isn t enough space for recording Multicam Surveillance System has been closed An unexpected error occurred in Multicam Surveillance System Error Code 1 or 2 There is an intruder Object Missing Unattended Object Alert Message of POS Scene Change Start end service IP change Record failed Status change of monitoring camera On xx Off xx By Schedule Stop start all cameras monitoring Start stop I O Monitoring By Schedule Schedule start Schedule stop All monitoring devise are stop too Start monitoring all type events Stop monitoring all type events Subscriber session is not established Wait time expired Unexpected logout before subscriber session is completed Can t find USB Protection Key Record file of Camera xx Wiegand Data Card No xxxxxx Camera xx Note Error Code 1 indicates a codec error Error Code 2 indicates that users can t write or record any data due to HD failure or user privilege C GeoVision 1 4 Subscriber Account Create at least one subscriber before starting Center V2 services On the Center V2 window click the Accounts button No 7 Figure 1 1 The Address Book window appears aa London V 1
80. ge for print 4 Print Prints the chart image 5 Up one level Goes to the previous chart image 6 3D 2D Presents the chart in 3D or 2D mode Presents the event data in pie line or column chart 7 Pie Line Column 8 Vie Presents the title label legend name count or iew percentage in the chart 108 a Center V2 1 22 Failover Server You can configure up to two failover servers in case of the primary Center V2 server failure Whenever the primary fails the failover server takes over the connection from subscribers providing uninterrupted monitoring services 1 To import subscribers accounts from the primary server to the failover server click the Import Export Address Book button No 6 Figure 1 2 on the Address Book toolbar and select Import to transfer the address book data 2 On the Center V2 window click the Preference Settings button No 8 Figure 1 1 and select Automatic Failover Support This dialog box appears lt 3 Automatic Failover Support Server IP Server Port Port Video Please add one or more Center 2 Server for redundancy purpose in case this server is not available or was offline Figure 1 79 109 C GeoVision 3 Click the Add button to add one server This dialog box appears Automatic Failover Support Server IP Po Serer Port 5547 Default Port Video Serer Figure 1 80 4 Type the IP Address of the failover server Keep the default port settin
81. ggered select Normal Right Arrow button Sets the delay time to notify Center V2 of input trigger This feature is only available when the Normal type is chosen Exit Delay While the system is activated this feature provides an interval of time for the subscriber to exit the premises During this time the specified input e g an exit entry door is inactive Once the exit delay expires the input will be fully armed Entry Delay While the system is activated this feature provides an interval of time for the subscriber to entry the premises During this time the specified input e g an exit entry door is inactive so that the subscriber can disarm the system If the subscriber fails to do once the entry delay expires Center V2 will get notified of the input trigger Output Module Enables the assigned output module when the selected input module is triggered For the example of Figure 1 12 when the I O Device Module 1 Input 4 is triggered the Output Module 1 Pin 3 will be activated simultaneously Right Arrow button Sets the delay time to trigger the assigned output module Event Type If the subscriber wants Center V2 always to get notified of the output trigger select Emergency If the subscriber wants Center V2 to get notified of the output trigger only when an assigned input is triggered select Normal 29 C GeoVision Note To set an input trigger for the notification of Normal events see Security
82. gin Information Center IP User ID Password Port 5547 Default Save Password came Figure 1 7 2 Type the IP address ID and password of a Center V2 Modify the default port if necessary Click OK This dialog box appears Connect to CenterV2 a amp Mode Normal Configure M Login after 30 seconds V Monitor all type events Centerv2 IP 127 0 0 1 192 168 0 115 X Figure 1 8 20 a Center V2 If you want to establish the connection to the second Center V2 click the button If you want to modify the login information of the established account select the account in the dialog box and click the 7 button If you want to delete the established account select the account in the dialog box and click the button When you finish the settings click the Connect button to start When the connection is established Center V2 will start receiving events live images or attachments from the subscriber 21 C GeoVision 1 5 1 Setting Normal Mode To further define the communication conditions between the subscriber and Center V2 select Normal Mode in the Connect to Center V2 dialog box Figure 1 8 and then click the Configure button for setup A drop down menu includes two options General Settings and Advance Settings The Advance Settings dialog box includes these tabs 1 Camera 2 Other and 3 I O Device 1 5 1 1 General Settings The settings define the
83. gs or modify them if necessary 5 Click OK When the primary Center V2 server fails all connections from subscribers will be diverted to the failover server automatically Note Once the primary server is ready to resume the services it is required to close the failover server so the connection from subscribers can move back to the primary 110 a Center V2 1 23 Assigning a Subscriber to Another Center V2 You can assign one subscriber to another Center V2 without ending the current connection For this function to work subscribers must also use GV System version 8 3 or later Note The function is not available for the subscribers of GV Video Server GV Compact DVR and GV IP Camera 1 In the Subscriber List right click the desired subscriber and select Dispatch to other Center V2 This dialog box appears Server Information IF 192 169 1 11 Fort 5547 Figure 1 81 2 Type the IP address of another Center V2 The default port value is 5547 Modify it if necessary 3 Click OK The subscriber will be therefore assigned to the designated Center V2 In the Subscriber List of the local Center V2 that subscriber s icon shows offline 111 C GeoVision 1 24 Channel Display on Another Monitor If the Center V2 is equipped with multiple monitors you can use the QView feature to display a selected channel on another monitor screen 1 On the Center V2 window click the Tools button No 5 Figure 1 1 and
84. gure and select Customize Message Settings The Customize Message Settings dialog box appears For setup details see 1 15 Setting Alert Levels of Event Messages 176 a Vital Sign Monitor 3 12 Event Log Browser To launch Event Log Browser click Tools on the window menu and select Event Log Browser This feature is the same as that in Center V2 For details see 1 14 Event Log Browser 177 C GeoVision 3 13 System Configuration On the window menu click Configure to see these options 1 System Configure 2 Password Setup 3 Event Log Settings 4 Local I O Device 5 Virtual I O 6 Notification and 7 Alerts Interval These options are discussed in this section 3 13 1 System Settings Click Configure on the window menu and then select System Configure to open this dialog box System Configure Startup Start Service when Vital Sign Monitor Starts Login SMS Server when Service Starts Connective Port Server Port Port 2 is assigned for GY IP devices Security Enhance network security Figure 3 16 178 Vital Sign Monitor Startup E Auto Run when Windows starts Automatically runs VSM at Windows startup m Start Service when Vital Sign Monitor starts Automatically starts the service when VSM starts m Login SMS Server when Service starts Automatically logs in the SMS Server when the VSM service starts You will be prompted to enter the related information of the SMS server
85. hance the coloring Deblocking Removes the block like artifacts from low quality and highly compressed video Defog Enhances image visibility Stabilizer Reduces camera shake Text overlay s camera name and time Overlays camera name and time onto the video Text overlay s POS GV Wiegand Overlays POS 43 C GeoVision Tools or GV Wiegand Capture data onto the video Full Screen Switches to the full screen view Wide Angle Lens Dewarping Corrects image distortion For setup detail see Adjusting Distorted Views 1 7 Recording Fisheye Select Geo Fisheye to choose a camera mode Mega Pixel View Enables PIP or PAP view Display GPS Shows the location on the map where the video is taken through GPS Select GPS Map Apply after restart Select a type of GPS map to apply Full Screen Switches to the full screen view Snapshot Saves a video image Save as AVI Saves a video as avi format Download Downloads the video clip from the DVR or IP video device to the local computer Note The Defog and Stabilizer only work when the functions have been applied on the recording from the DVR 44 a Center V2 1 9 Two Way Audio The Center V2 operator can perform two way audio with subscribers Note This function is only supported for GV System subscriber version 8 0 or later 1 The GV System needs to grant Center V2 the privilege to allow two way communications On the GV System click the Network button
86. i DYR1 Device Lost Camera 12 Video Lost 5 10 2011 3 28 31 PM 5 10 2011 3 28 31 PM Na a DYR1 Device Lost Camera 13 Video Lost 5 10 2011 3 28 31 PM 5 10 2011 3 28 31 PM DVR1 DeviceLost Camera 14 Video Lost 5 10 2011 3 28 31PM 5 10 2011 3 28 31 PM 4 DYR1 Device Lost Camera 15 Video Lost 6 10 2011 3 28 31 PM 5 10 2011 3 28 31 PM a DVR1 Device Lost Camera 16 Video Lost 5 10 2011 3 28 31PM 5 10 2011 3 28 31 PM DVR1 Device Lost Camera 1 Video Lost 5 10 2011 3 28 31PM 5 10 2011 3 28 31 PM DVR1 Motion Camera 2 detected motion 5 10 2011 3 31 12 PM 5 10 2011 3 31 12 PM Motion Connection Figure 1 41 Login Logout Attachment Wiegand Data Device Lost Offline Event a Center V2 Configuring the Event Tabs All the event tabs are enabled by default You can also disable the unwanted tabs 1 On the Center V2 window click the Preference Settings button and select My Favorite Events A sub menu appears System Configure Event Log Settings Password Setup E Mail Setup SMS Setup Local I O Device Virtual I O Notification Customize Alarm Report Customize Message Settings v Motion Automatic Failover Support v Trigger Version Information v Connection v Alarm v Login Logout v Attachment v Wiegand Data v Device Lost v Offline v Customized Event Figure 1 42 2 Unselect the event tab as required Setting up the Customized Event Tab You can also configure the Customized Event tab which groups the selected eve
87. ification Settings 2 14 SMS Alerts and 2 15 E Mail Alerts respectively 191 C GeoVision 3 18 Event Chart The Event Chart can provide you the daily weekly and monthly statistical chart based on different criteria This feature is similar as that in Center V2 For details see 1 21 Event Chart To launch the Event Chart click Tools on the window menu and select Event Chart 192 a Vital Sign Monitor 3 19 Failover Server You can configure up to two failover servers in case of the primary VSM server failure Whenever the primary fails the failover takes over the connection from subscribers providing uninterrupted monitoring services To access this feature on the VSM window menu see Figure 3 1 click Service and select Automatic Failover Support This feature is the same as that in Center V2 s For details on setup see 1 22 Failover Server 193 Appen Dongle Description Upgrading the Black Dongle Fast Backup and Restoration Watermark Proof PTZ Control Using GV Joystick V2 Image Size on Center V2 UPnP Settings Supported IP Device Brands and Protocols MultiLang Tool for Translated Text Specifications Appendix A Dongle Description Note the following requirements and limitations for GV USB Dongle e An appropriate USB dongle of Black color is required for each CMS module to work Using more than one Black Dongle on the same computer is possible But remember the rule that Con
88. ifications with attachments Note For the subscriber to provide pre event and post event recordings of an event it has to be recording in the round the clock mode a Center V2 1 4 4 Channel Heading For easy identification you can define the background color of channel headings for each subscriber 1 On Center V2 window click the Accounts button No 7 Figure 1 1 highlight a subscriber and click the Subscriber Setting button on the toolbar The Subscriber Settings dialog box Figure 1 4 appears 2 Click the Color of Channel Caption button The color dialog box appears 3 Select a color you wish to use and click OK The Color of Channel Caption button now displays the color you selected 4 Onthe Center V2 window click the Preference Setting button No 8 Figure 1 1 and select System Configure The Preference dialog box Figure 1 54 appears 5 Click the General tab and select Use the subscriber setting color as background The background color of the channel heading will be in the color you selected Channel Heading teamed eR Figure 1 6 19 C GeoVision 1 5 Connection to Center V2 A single GV System can connect up to two Center V2 centers simultaneously for central monitoring To configure GV System in order to access Center V2 remotely through a network connection follow these steps 1 In the Main System click the Network button D and select Connect to Center V2 This dialog box appears Lo
89. ing dialog box Configure Download EMap files l Use local EMap files Browse _ C Program FilesiRemote EMapire C Program FilesiRemote EMapire a a m d Figure 1 73 Download EMap files Click to download E Map files from the subscriber server to the local computer This option can reduce network load when you want to view E Maps of multiple subscribers m Use local EMap files Once downloading E Map files to the local computer you can use these E Map files for connection Motion I O Input Alert Sound Select this option and assign a wav file to alert the operator when motion is detected or input devices are triggered m Camera Blink I O Blink When cameras or input devices are triggered their icons on the E map flash 103 GeoVision 104 EMap Auto Popup When cameras or input devices are triggered the related map will be displayed on the Remote E Map window instantly Show Event Select this option to display motion or input triggered events on the Host Information window I O Trigger Camera When input devices are triggered the related camera views will be displayed on the Remote E Map window instantly For this function to work input devices must be mapped to cameras on the Main System Hide Tree List Select this option to hide the tree list Enable DirectDraw The DirectDraw is enabled by default Some VGA cards might not support DirectDraw and can produce distorted frames In th
90. ing the Filter function in the Log Brower to sort out the desired events 131 GeoVision A list of Types and Messages from Center V2 will be displayed Type Motion Trigger Connection Alarm Attachment System Message Camera detected motion I O Trigger Module xx Trigger Resume Video of Camera xx By Module xx Video Lost Module Lost The network connection is lost The connection of client xx is abnormal Camera cannot be controlled Ping Timeout Failed to establish the connection Video signal of Camera xx has resume Module xx has returned to normal Failed to Login SMS Server Failed to send short message SMS Server is shutdown There isn t enough space for recording There isn t enough space for recording The storage for Event Log is low Event Log will not take any new entries An unexpected error occurred in Multicam Surveillance System Error Code 1 or 2 There is an intruder Object Missing Unattended Object Alert Message of POS Record file of Camera xx Live Attachment or offline Start Recycle Recycle Event Log Status change of monitoring cameras On camera no Off camera no By Schedule Stop all cameras monitoring Start all cameras monitoring Start I O Monitoring By Schedule Stop I O Monitoring By Schedule Schedule Start Schedule Stop All monitoring devices are stop too Start monitoring all type events Stop monitoring all type events Subscriber sessi
91. is case disable the feature Use small icon The Remote E Map uses the large icons of cameras and I O devices by default Select this option if you want to use small icons a Center V2 1 21 Event Chart The Event Chart can provide you the daily weekly and monthly statistical chart based on different criteria These statistical charts allow the administrator to analyze the occurrence of different event types and message types and the events that occur on different subscribers To display the Event Chart you need to install the following software on the computer Use the links in the Software DVD or click Here below to download the software e Microsoft NET Framework 3 5 SP1 or later versions Click Here e Microsoft Chart Controls Click Here 1 21 1 Accessing the Event Chart 1 Click the Tools button No 5 Figure 1 1 and select Event Chart This window appears CenterV2 Event Chart Please select the time range ofthe query Sun Mon Tue Wed Thu Fri Sat l 2 3 RB 5 6 7 8 9 10 11 12 13 14 15 16 i7 15 19 20 21 22 23 24 25 26 27 28 29 30 31 Day 2003 08 04 C Week 2003 07 29 2003 08 04 C Month 2003 08 Cancel Figure 1 74 105 C GeoVision 2 Specify a day or select a week or month to query the event data Click the Next button This dialog box appears CenterV2 Event Chart Please selectthe query type C ID C message Type C Import Data Cancel Figure 1 75 3 S
92. is feature is only supported by certain models of GV IP Cameras and GV System with GV 3008 Card 2 For the GV IP Cameras that support temperature display refer to the GV IPCAM H 264 User s Manual for detail To configure the temperature alarm 1 If you have a GV System subscriber make sure the Send temperature status to Vital Sign Monitor option is enabled For details see System Information Advanced Settings for Subscriber in 3 6 Connection to VSM 2 Onthe VSM window click Configure and select Temperature Monitoring The Temperature Monitor dialog box appears 3 Inthe Units section select Celsius or Fahrenheit The selected unit will be used in the alarm message Temperature Monitor Units Celsius C Fahrenheit F o C 100 C H Figure 3 20 190 a Vital Sign Monitor 4 To show both units in the Subscriber Status see Figure 3 10 select the Show both units option Tip With the Show both units option is selected select either Celsius or Fahrenheit for the unit to come before the other in the Subscriber Status 5 Inthe Alarm section specify the critical temperature 6 Click OK Once the temperature reaches or exceeds the critical temperature an alarm event such as Critical Temperature Alarm 77 5 C will be shown on the VSM window You can also invoke computer alarm and local output device and send SMS and e mail alerts using the Alarm Settings For details see 1 16 Not
93. l be fully armed Entry Delay While the system is activated this feature provides an interval of time for the subscriber to entry the premises During this time the specified input e g a exit entry door is inactive so that the subscriber can disarm the system If the subscriber fails to do once the entry delay expires the VSM will get notified of the input trigger Output Module Enables the assigned output module when the selected input module is triggered For this example of Figure 3 7 when the I O Device Module 1 Input 4 is triggered the Output Module 1 Pin 3 will be activated simultaneously 161 C GeoVision Event Type If the subscriber wants the VSM always to get notified of the output trigger select Emergency If the subscriber wants the VSM to get notified of the output trigger only when an assigned input is triggered select Normal Right Arrow button Sets the delay time to trigger the assigned output module This feature is only available when the Normal type is chosen The Exit Delay and Entry Delay options are similar to those described in the input trigger Note To set an input trigger for the notification of Normal events see Security Service below Allow Vital Sign Monitor to Force Output Allows the VSM operator to manually force output devices installed at the subscriber s site Security Service Notify the VSM server of events only when an input is on or when the events occur within
94. lications click Save For the following applications the system will automatically locate the corresponding files on your computer and replace with the revised translation GV System Remote ViewLog Fast Backup and Restore FBR GV IP Device Utility Multi View Remote E Map Center V2 Vital Sign Monitor Dispatch Server GV GIS MCamCtrl Utility POS Text Sender Authentication Server SMS Server Audio Broadcast Multicast Bandwidth Control Client Site Backup Viewer Mobile Server Appendix After applying the revision a dialog box appears to show which applications have been revised Click OK Pa Updated GvNVR r C GV1480 MultilingualConfig C Program Files x86 MultilingualConfig MultiView C Program Files DMMultiView m OCx C Windows GeoOCx Remote ViewLog C Windows Geovision Remote Viewlog 20111017 v ee A Figure l 4 The message Do you want to apply the revised multilingual texts to another folder appears If the storage path for the application has been changed or if the associated application is not listed in the dialog box click Yes and select the folder of the application To export or send the revised text 1 To export the revision as an executable file click Tools Export and Export executable file You can copy the exe file to another computer and apply the same translation revision by running the exe file To report th
95. ll be applied in the next startup Group First Dispatch Log Keep Days 30 Log Path D Dispatch Log Available space 19 70 GB CenterV2 Event Log Z Enable Real Time CenterV2 Event Center V2 Keep Days 30 Log Path D Dispatch CenterV2Log Available space 19 70 GB 2 Mrecycle Lag Dispatch Server Figure 2 6 Click OK Restart the Center V2 Without this step the Center V2 will not connect to the Dispatch Server a Dispatch Server 2 7 Connecting GV System to Dispatch Server Configure the GV System so that it can connect to Dispatch Server Follow these steps to connect GV System to Dispatch server 1 On the main screen of GV System click the Network button DI and then select Connect to Center V2 The Login Information dialog box appears See Figure 1 7 2 Inthe Center IP field type the IP address of the Dispatch Server 3 Type a user ID and password created in the Dispatch Server 4 Change the port number from 5547 Center V2 port to 21112 Dispatch Server port 5 Click the OK button The Connect to Center V2 dialog box appears 6 Click the Connect button to enable connecting to the Dispatch Server Note If you want to modify the login information of the Center V2 on the Connect to CenterV2 dialog box click the listed Center V2 IP and then select Modify 125 C GeoVision 2 8 Connecting GV IP Device to Dispatch Server The Dispatch Server can distribute GV IP Devices to Center V2 Serv
96. llowing window Monitoring Indicates whether camera and I O monitoring are enabled at the subscriber s sites Subscriber Information Storage Monitoring Page 1 gt Subscriber List China France German India a h Group C Cameras Monitoring C Cameras Monitoring C Cameras Monitoring C Cameras Monitoring i China France German Japan Taiwan UAE UK India C Cameras Monitoring Cameras Monitoring C Cameras Monitoring C Cameras Monitoring CNO Monitoring VO Monitoring C VO Monitoring _ VO Monitoring CO Monitoring C rO Monitoring CrO Monitoring CrO Monitoring Figure 3 11 Storage Indicates the total storage size and free space at the subscriber s sites For this subscribers must grant this privilege first See System Information in Figure 3 8 Subscriber Information _ Storage Monitoring gt Subscriber List France German a Group ZA Total Total i China ae Free Free i France German Taiwan UAE India z Total 13 65 GB Total Japan Free 1 19 GB Free I Taiwan Figure 3 12 169 C GeoVision 3 7 3 Disabling Subscription The VSM operator can disable its services to an individual subscriber when subscription expires On the Address Book Figure 3 2 right click one subscriber and select Disable To restore the subscription right click again to select Enable 170 a Vital Sign Monitor 3 8 Subscriber Schedule The VSM o
97. me 11 End Frame 12 Speed Control 13 Right Click Menu 38 Description Moves the EZ Player window by clicking and holding on this button Plays the video file Pauses the video file Stops the video file Goes to the previous frame of the video file Goes to the next frame of the video file Goes to the beginning of the video file Goes to the end of the video file Controls the play speed m PIP View Refers to Picture in Picture You can zoom in on the video See 4 17 PIP and PAP View PAP View Refers to Picture and Picture You can create a split video effect with multiple close up views on the video See 4 77 PIP and PAP View m Wide Angle Lens Dewarping Corrects image distortion See Adjusting Distorted Views in this section m Fit Window Size Adjusts image size to fit the screen a Center V2 Changing Playback Mode You can choose to play back video one by one in the same player or separate players simultaneously 1 Click the Tools button on the EZ player No 1 Figure 1 20 and click Setup from the pop up menu This dialog box appears View Open each video in its own windows Figure 1 21 2 To play back one video at one time in the same player select Open each video in the same windows 3 To play back multiple videos in separte players simultaneoulsy select each video in its own windows Adjusting Distorted Views When viewing videos through EZ player images may be curved ne
98. move back to the primary 145 Chapter 3 Vital Sign Monitor Vital Sign Monitor VSM applies to the center monitoring station where multiple GV Systems are being monitored When alert events occur in a GV System VSM will receive alert text messages computer alarms and or output alarms while an SMS message and an E Mail are sent out to subscribers VSM also supports GV IP devices GV Video Server GV Compact DVR GV IPCam for central monitoring Vital Sign Monitor 3 1 Minimum System Requirements Before installation make sure your computer meets the following requirements Standard Requirements Windows XP Vista 7 8 Server 2008 __ TE _ AGP or PCI Express 800 x 600 1280 x 1024 gt O recommended 32 bit color Internal or External GV USB Dongle Advanced Requirements Connects to 1000 DVR subscribers or more os Boi S recommended 32 bit color 9 0c Internal or External GV USB Dongle 147 C GeoVision Software License 1000 subscribers VSM Control Center VSM Control Center Video Wall VSM Center V2 VSM Dispatch Server Internal or external Note It is recommended to use the internal GV USB Dongle to have the Hardware Watchdog function which restarts the PC when Windows crashes or freezes When multiple GV System are connected to the VSM make sure you meet the following bandwidth to ensure the download quality 100 12 Kbps 500 2 Mbps 1000 4 Mbp
99. n and select the type of alarm report from the drop down list For details see Filtering the Event Log in 1 14 Event Log Browser 3 Click OK The search results will be displayed in the Event Log Browser window 4 To print out the alarm reports along with the search results click the Page Setup button No 8 Figure 1 47 select Print Managing Alarm Report and click OK 5 Click the Print button No 9 Figure 1 47 Find the alarm reports in the last part of the printouts Also see Printout Settings in 1 14 Event Log Browser 61 C GeoVision 1 13 Event List 1 13 1 Marking the Events with Colorful Flags The flags of various colors are provided to distinguish different events You will find them useful not only when browsing in the Event List but also when using the Filter function to sort out the desired events v G Message Red Flag System Start Service Blue Flag Login Logout Login Yellow Flag System Start Monitoring All Type Events System Stop I O Monitoring Green Flag wae System Stop all cameras monitoring Orange Fla A ave Motion Camera 1 detected motion Purple Fla x r Y 2 Motion Camera 2 detected motion J Flag Complete Attachment Record file of Camera 1 Live Clear Flag Setup Figure 1 39 You can name the colorful flags with the provided texts or change the texts to meet your needs 1 Onthe Event List window select one event and right click in the flag column The flag list appea
100. n the SMS Server and VSM is established there are several ways to send out SMS messages to subscribers See the VSM window for the following selections 1 Click the Send Short Message button No 11 Figure 3 1 This sends out SMS to an individual subscriber manually 2 Onthe Event List double click any event type to call up a message window and then click the Send Short Message icon This sends SMS to an individual subscriber manually 3 On the Subscriber List No 18 Figure 3 1 right click one subscriber and select Send Short Message This sends SMS to an individual subscriber manually 4 Click Configure on the window menu and select Notification to display the Alarm Settings window Select Send SMS Alerts This sends SMS to subscribers automatically when alert conditions occur See Notification Settings earlier in this chapter 186 a Vital Sign Monitor 3 15 3 Inserting Device Information The subscriber s ID and camera name can be automatically inserted to your SMS message when it is sent out Click Configure on the window menu and select Notification The Alarm Settings dialog box appears For details see Inserting Device Information 1 18 SMS Alerts 187 C GeoVision 3 16 E Mail Alerts You can send e mails to subscribers when alert conditions occur 3 16 1 Setting Mailbox Before you can send e mails to an e mail account you need to define your mailbox correctly Click Configure on the window me
101. ndow This window contains these tabs 1 General 2 Layout 3 Network 4 Record and 5 Dispatch Server 1 15 1 General Settings Preference General Layout Network Record Dispatch Server Monitor Option Manual close channel Post motion Camera send by VO trigger will monitor Monitor the camera sent by GY VWiegqand capture Record the channel triggered by video analytics events Image Quality sath ie Normal Enable Directdraw D Start up C Auto Run when Windows Starts Login SMS Server when Start Service Channel Caption _ Use subscriber s color setting as background Figure 1 54 Monitor Option E Manual close channel Closes the triggered camera view manually m Close the camera view when motion stopped Closes the triggered camera view automatically when motion stops T7 GeoVision Post Motion Specifies the duration of the camera view remaining on the monitoring window after motion stops Camera send by I O trigger will monitor Specifies the duration of the camera view remaining on the monitoring window when an I O device is triggered To keep the camera view remaining on the monitoring window even after the alarm is finished click the right arrow button and uncheck Latch Trigger Then the camera view will remain on the monitoring window for the specified time For example the alarm is triggered for 5 minutes and you set 10 minutes which means the total display time
102. ng Object Unattended Object Text Format of SMS K Scene Change Tampering Alarm POS Loss Prevention ascll O Unicode Figure 1 63 3 Select Output Module and define the module number and pin number using the drop down lists 4 To set up more event types for alarm output repeat steps 2 and 3 91 C GeoVision 1 17 4 Triggering Outputs Manually 1 On the Center V2 window click the Tools button No 5 Figure 1 1 and select Force Output This dialog box appears Force Output of I O Device Module Module 1 vl Output SSiSste amp amp 8 amp e EEE Ee Figure 1 64 2 Select a desired module and then click the Finger button a to trigger the output You can also trigger the outputs connected at the subscriber site through the I O Status interface For details see Showing I O Status 1 10 Advanced Monitoring and Management 92 1 18 SMS Alerts a Center V2 You can send SMS messages to subscribers when alert conditions occur 1 18 1 Setting SMS Server Before sending SMS messages to an individual subscriber you need to define SMS Server correctly 1 On the Center V2 window click the Tools button No 5 Figure 1 1 and then select Connect to SMS Server to display this dialog box SMS Setup Connection Setup Connection Server IP Server Port Login ID Password Mobile Setup SMS Option 127 0 0 1 1
103. ng the drop down list Customize Dispatch Setting ID Dispatch Option DYR1 Center 2 Server 1 DYR2 FD120D M Auto re dispatch subscriber after CenterVv2 Server is online Figure 2 9 3 Select Auto re dispatch subscriber after Center V2 Server is online Click OK This subscriber will be distributed to the selected Center V2 Server whenever it is connected to the Dispatch Server 129 C GeoVision 2 10 Event Query This feature lets you locate a desired event by posing a query on Center V2 Servers Click the Stop Start Query Center V2 Event button No 7 Figure 2 1 on the toolbar to display the following dialog box Check the desired query items Type ID Date and or Time define your query condition under each item and then click OK to display the query results 7 a Query CenterV2 Event auer condition w Type System Pci Date 1 S2006 v Time 00 00 00 2 23 59 59 2 Figure 2 10 The Query feature supports the remote playback when folder sharing on the recording folder of Center V2 is enabled Double clicking any found event with video attachment can play it back on Dispatch Server Note To enable folder sharing on the recording folder of Center V2 right click the folder and select Sharing and Security Click the Sharing tab in the Network sharing and security section select Share this folder on the network Click OK The default path for recordings is Center V2 Data 13
104. ngs dialog box appears Figure 1 10 Select Allow Center V2 to View Live Camera To apply the settings to all the cameras click the Finger button Connect the GV System to the Center V2 On the Center V2 window right click one camera under the subscriber and select Live View May 10 11 33 08 5 85 GB 8a Center 2 a 123 Sl m1 y Live View B Camer Camera Audio Control Module 1 Figure 1 16 a Center V2 When a subscriber is in focus you can enable live view to all its cameras 1 Click a subscriber in the list and select Focus on this subscriber only 2 Click the subscriber again and select View All Cameras Live 1 Camera 2 AE ar May 10 11 34 35 5 85 GB 83 Centerv2 a fa 123 ay Camera 1 view all cameras Live Sy Camera 2 Cancel all live view H T Module 1 Cancel focus Figure 1 17 Note You can enhance coloring on live images See the Enable Directdraw option in the General Setting dialog box Figure 1 54 35 C GeoVision 1 7 Recording By default the Center V2 records any events and motion detected at the subscriber When the video is recorded a message labeled with Live appears on the Event List Type Message Message Time Start Time Motion Camera 1 detected motion 8 5 2010 10 36 19 AM 8 5 2010 10 36 19 AM Attachment Record file of Camera 1 Live 8 5 2010 10 36 25 AM 8 5 2010 10 36 19 AM Figure 1 18 Note The default path of
105. nitor Note 1 When Time synchronization with Vital Sign Monitor is selected the function of time synchronization will be activated as soon as the VSM is started up and it will be re activated every 12 hours 2 The Send temperature status to Vital Sign Monitor is only supported in GV System with GV 3008 Card and certain models of GV IP camera 3 The Send POS device connection status to Vital Sign Monitor option is only supported when the POS device is connected to the GV System through LAN or the Internet Monitoring Schedule Without installing any I O device you can still set a time schedule to notify VSM of the events that occur during the defined times Click the Schedule Setting button on the right to define the time spans The Monitoring Schedule dialog box appears Figure 1 13 Advance Settings General Camera Monitoring Schedule System Information Security Service Schedul chedule Mode Schedule Setting Figure 3 9 165 C GeoVision 3 6 2 Detecting Input Status The feature is designed to monitor all inputs for a change of state whenever the subscriber starts the live monitoring through VSM A change from the previously defined state N O to N C or N C to N O will activate an alarm condition Click lees on the Connect to Vital Sign Monitor dialog box Figure 3 4 For details see Input State Detection Chapter 6 GV DVR User s Manual on the Software DVD 166 a Vital Sign Monitor
106. nt Chart button ht on the Dispatch Log Browser This dialog box appears Chart Settings Query by mr ii Figure 2 14 From the drop down list select Application Type to display events by the type of server ID to display events by ID or Status to display events by the type of status Application Type includes Dispatch Server Center V2 Server and Center V2 Subscribers When Status is selected events are categorized into Account System Login logout Connection Control and Dispatch a Dispatch Server 4 Click OK to see the data displayed in a chart Query By Application Type Dispatch Server CenterV2 Server Center V2 Subscriber Figure 2 15 This feature is similar as that in Center V2 See 1 21 Event Chart for more information on the controls of the chart window 143 C GeoVision 2 19 Failover Server You can configure up to two failover servers in case of the primary server failure Whenever the primary server fails the failover server takes over the connection from subscribers providing uninterrupted services 4 5 144 To import subscribers accounts from the primary server to the failover server click the Import Export Address Book button No 8 Figure 2 2 on the Address Book toolbar and select Import Address Book to transfer the address book data On the Dispatch Server window click the Server Setting button No 3 Figure 2 1 The Dispatch Server Setting dialog box Figure 2
107. nt types under a single tab With only a click of the Customized Event tab you can monitor the desired events instantly 1 On the Center V2 window click the Preference Settings button and select Customize Message Settings The Customize Message Settings dialog box appears 65 C GeoVision 2 Select an event from the left and select Add to Customized Event Tab Customize Message Settings gt Camera Motion Text Color Video Lost Assign By Priority VO Trigger VO Module Lost Ta The network connection is lost F Disk Full Customize Color et eet Logout Start Service Stop Service Sample Detected change of bind IP restart the service Failed to establish the connection Multicam Surveillance System is abnormally c Show Camera by I O Trigger Failed to start recording Add to the Customized Event Tab Record File Failed to Login Dispatch Server Recycling is started Sample Tet Figure 1 43 3 To view the customized events select the Customized Event tab on the event category of the Center V2 window Displaying the Event List on Another Monitor If the Center V2 is equipped with multiple monitors you can assign a particular event type to display on another monitor Right click the desired event tab select Display on Another Monitor and select a monitor for display Event List kH ID Type Message 1 Motion Camera 1 detected motion 1 Motion Camera 1 detect
108. nu and select E Mail Setup For setup details see 1 19 E Mail Alerts 3 16 2 Sending E Mail There are several ways to send e mail alerts See the VSM window for the following selections 1 Click the E Mail button No 10 Figure 3 1 This sends the e mail to an individual subscriber manually 2 On the Subscriber List No 19 Figure 3 1 right click one subscriber and then select Send E Mail This sends the e mail to an individual subscriber manually 3 On the Event List double click one event to call up a message window and then click the e mail icon This sends the e mail to an individual subscriber manually 4 Click Configure on the window menu and select Notification to display the Alarm Settings window Select Send E Mail Alerts This sends e mails to subscribers automatically when alert conditions occur See Notification Settings earlier in the chapter 188 a Vital Sign Monitor 3 16 3 Inserting Device Information The subscriber s ID and camera name can be automatically inserted to your e mail message when it is sent out Click Configure on the window menu and select Notification The Alarm Settings dialog box appears For details see Inserting Device Information 1 18 SMS Alerts 189 C GeoVision 3 17 Temperature Alarm You can set temperature alarm which notifies the VSM operator when the internal temperature of its subscriber reaches or exceeds the critical temperature specified Note 1 Th
109. of exe in the Center V2 folder 2 Inthe Watermark Proof window click File from the menu bar select Open and locate the recorded file avi The selected file is then listed on the window Alternatively you can drag the file directly from the storage folder to the window Note The default path of recorded files is Center V2 Data subscriber Live 3 If the recording is unmodified a check mark will appear in the Pass column On the contrary if the recording is modified or does not contain watermark during recording a check mark will appear in the Failed column To play the recording double click the listed file on the window i Water Mark Proof Event20030110033600001 avi File Name Pass Failed D CenterV2 Datal Livetcam0110110 Event200301100 M DACenterv2 Data tLivelcam0110110 Event200301100 M 291 291 Current Total frame 1 10 2003 11 36 09 890 Figure D 1 202 Appendix E PTZ Control Using GV Joystick V2 You need to run the following program in the background when using the GV Joystick V2 to control PTZ For details on the GV Joystick V2 operations see GV Joystick V2 User s Manual e Center V2 You can control the PTZ cameras using GV Joystick V2 in Camera Audio Control see Figure 1 28 Up to 8 GV Joystick V2 can be connected to control the PTZ cameras 1 Run meamctrl exe from the program folder This dialog box appears Keyboard amp Joystick GV KB 1 v DYR ID Name
110. on is not established Wait time expired Unexpected logout before subscriber session is completed Note Error Code 1 indicates a codec error Error Code 2 indicates that users can t write or record any data due to HD failure or user privilege 132 Dispatch Server 2 12 Subscription Schedule The Dispatch Server operator can create schedules to monitor subscription status When subscribers don t log in Dispatch Server on the programmed time the operator and subscribers will get notified To set up a schedule see 1 11 Subscriber Schedule When a subscriber doesn t log in Dispatch Server on time this message will appear on the Event List Service hour engaged still waiting for subscriber to log in When a subscriber logs out suddenly during a service time this message will appear Unexpected subscriber logout during service times e To notify subscribers by SMS and E Mail see 2 74 SMS Alerts and 2 15 E Mail Alerts 133 C GeoVision 2 13 Live View You can view live videos from subscribers To access a live view right click any online subscriber on the tree view of the Dispatch Server window No 11 Figure 2 1 and select Camera Audio Control For details on the controls of the Live View window see 4 6 Live View You can enhance the coloring to have more vivid and saturated images Click Configure on the menu bar select DirectDraw Configuration select Use Colorful Model click OK and restart
111. or example if the video stream from a subscriber is 704 x 576 and Center V2 operator selects Middle the size of displayed image on Center V2 will be 720 x 288 For details on the image size see Corresponding Image Sizes of Subscriber and Center V2 Appendix Center V2 supports megapixel resolution If the subscriber sets the resolution to megapixel and the Center V2 operator wishes to view the videos of the same size the Center V2 operator can select Actual Size Note this setting will require a lot of bandwidth It is recommended to select the option in LAN environment Auto Record Video Center V2 automatically records events based on the following Record Mode Record Mode Live Mode Streams live video to Center V2 This is the default recording mode on the Center V2 Make sure you have enough bandwidth to receive video in live To set the maximum duration of a video file recorded on Center V2 click the Settings button Attachment Mode A defined time of event will be recorded before sending to Center V2 The attachment will be sent out immediately once your subscriber is connected to Center V2 The Attachment Mode also provides several options associated with the attachment Click the Settings button to bring up the Record Settings Attachment Mode dialog box See Attachment Mode Settings later for further setup Both Live amp Attachment Sends both live video and attachment files 13 C GeoVision Color of Channel Ca
112. out immediately 23 C GeoVision 1 5 1 2 Advanced Settings Camera Use the Camera tab to define the camera conditions under which the Center V2 server is notified By default the Center V2 server is notified of all event types To change this setting first disable the Monitor all type events option Figure 1 8 Advance Settings Camera Other 1 0 Device Camera a V Send to Center 2 when Motion is Detected I Allow Center 2 to View Live Camera Emergency z B H V Notify Center 2 when the following events come up Intruder Missing Object Unattended Object Scene Change Figure 1 10 m The Camera list Click the drop down list to select the camera to be configured Or you can click the Finger button to apply the settings to all cameras 24 a Center V2 m Send to Center V2 when Motion is Detected Sends notifications video and text messages to Center V2 when motion is detected Event Type To always notify Center V2 of motion event select Emergency To only notify Center V2 of motion event when an assigned input is triggered or within the established schedule select Normal Allow Center V2 to View Live Camera Gives Center V2 the privilege to view your cameras at any time m Allow Center V2 to Control PTZ Camera Gives Center V2 the privilege to control your PTZ cameras Remember to properly set up camera mapping first See Mapping PTZ Cameras Chapter 1 GV DVR User s Man
113. pan1 00 wi 00 v 00 w 100 Next Day C Span2 00 00 v 00 v 100 v Next Day O Span 3 00 00 v 00 v 100 Next Day C Weekend Saturday and Sunday Only Sunday Status Connected Connected Time Fri Jun 24 16 21 57 2011 Figure 2 8 4 Enable connection to Dispatch Server A Active Link Click to configure and enable the connection B Host Name or IP Address Type the host name or IP address of the Dispatch Server C Port Number Match this port to the port value in step 2 Figure 2 7 to connect to the Dispatch Server D User Name Type a user name already established in the Dispatch Server to log in 127 C GeoVision E Password Type a valid password to log into the Dispatch Server F Click Apply The Connection Status should display Connected and the connection time 5 This subscriber will be automatically distributed to an online Center V2 Server that has the least number of subscribers 128 2 Dispatch Server 2 9 Setting a Primary Center V2 Server You can set up a primary Center V2 Server to which the subscriber is distributed whenever this Center V2 Server is connected This function is especially useful when you wish to ensure that a certain Center V2 Server gets the priority of monitoring a particular subscriber 1 Click Configure on the main screen and select Customize Dispatch Setting The Customize Dispatch Setting dialog box appears 2 Select a primary Center V2 Server usi
114. patch Server 2 4 Subscriber Account Dispatch Server can serve up to 50 Center V2 Servers and 25 000 Center V 2 s subscribers simultaneously Before starting the services create at least one server and one subscriber account on the Dispatch Server To create an account click the Account button No 4 Figure 2 1 to display this Address Book window SMSL xP oo SJ Address Book all D Name Telephone H Telephone O Mobile Phone E mail 5 Taipei GeoVision 2 87978377 geo geovision c Neihu v lt Statistics Group 1 Server 0 Subscriber 2 25000 Figure 2 2 The toolbar on the Address Book window No Name Description 1 Add A Group Adds a group folder 2 Add A Server Adds a Center V2 Server 3 Add A Subscriber Adds a subscriber 4 View Edit Opens Subscriber Address Book for viewing Subscriber Address Book and editing Highlight one subscriber and click this button to configure the settings of video and alert formats For details refer to 1 4 2 Subscriber Settings and 1 4 3 Attachment Mode Settings 5 Subscriber Setting 6 ubsciibor Schedule Sets up subscription schedules Setting Delete A Highlight a group a server or a subscriber and Group Server Subscriber click this button to delete it Import Export Address Book 9 Find A Subscriber Searches a subscriber account Imports or exports the address book data 10 Find A Server Searches a server account 119 C GeoVision Creating a Sub
115. perator can create schedules to monitor subscription status When subscribers don t log in the VSM on the programmed time the operator and subscribers can get notified To set up a schedule see 1 11 Subscriber Schedule When a subscriber doesn t log in the VSM on time this message will appear on the Event List Service hour engaged still waiting for subscriber to log in When a subscriber logs out suddenly during a service time this message will appear Unexpected subscriber logout during service times e To activate the computer and output alarm to notify the operator while an SMS and an E mail message being sent out to a subscriber use the Notification feature For details see Notification Settings later in this chapter 171 C GeoVision 3 9 Alarm Report For every event the VSM operator can generate a report to evaluate certain conditions This function is the same as that of the Center V2 For details see 1 12 Alarm Report 172 a Vital Sign Monitor 3 10 Remote Playback You can retrieve the recordings from GV System GV Video Server or GV Compact DVR for playback The following function must be enabled ahead to allow remote access GV System Enable the Run Remote ViewLog Service option in Figure 3 5 and start recording GV Video Server GV Compact DVR Enable the Remote ViewLog function and start recording On the Event List No 21 Figure 3 1 double click one motion event This win
116. ption Changes the color of channel headings For further setup see Channel Heading later in this chapter 1 4 3 Attachment Mode Settings You can set up the number of video clip attached with a notification message when events occur at the subscriber site You will see the a Center V2 attachment message like the examples below on the Event List Double click the message to play back the video instantly Motion Camera 1 detected motion Attachment Record file of Camera 1 Pre Event Attachment Motion Camera 1 detected motion Alarm There isn t enough space for recording Motion Camera 1 detected motion GBHBBHHBBR8B Note There are four types of attachment messages Attachment for motion detection Input trigger Attachment for an input device triggered 1 10 2003 5 12 11 PM 1 10 2003 5 12 35 PM 1 10 2003 5 13 28 PM 1 10 2003 5 13 34 PM 1 10 2003 5 14 11 PM 1 10 2003 5 14 12 PM 1 10 2003 5 14 23 PM 1 10 2003 5 15 02 PM 1 10 2003 5 15 17 PM 1 10 2003 5 15 21 PM 1 10 2003 5 15 33 PM 1 10 2003 5 12 11 PM 1 10 2003 5 12 35 PM 1 10 2003 5 08 48 PM 1 10 2003 5 13 34 PM 1 10 2003 5 14 11 PM 1 10 2003 5 14 12 PM 1 10 2003 5 14 23 PM 1 10 2003 5 15 02 PM 1 10 2003 5 14 09 PM 1 10 2003 5 15 21 PM Pre Event Attachment for pre event recordings and Post Event Attachment for post event recording 15 C GeoVision In the Subscriber Settings dialog box Figure 1 4 select Attachment Mode and click the
117. puts manually see Triggering Output Manually later in this section 89 C GeoVision 1 17 2 Configuring a Virtual GV I O Box 1 90 On the Center V2 window click the Preference Setting button No 8 Figure 1 1 and select Virtual I O The Virtual I O Device dialog box appears Click the Add button This dialog box appears Virtual 1 0 Device Device Gv I0 BOX 8 IP 192 168 2 11 pot 10000 Demar ID admin Password eeeee Figure 1 62 Select the device using the drop down list and type the IP address ID and Password of the GV I O Box You can look up the IP address of the GV I O Box using the GV IP Device Utility Click OK to finish adding the GV I O Box To trigger outputs automatically by event see Triggering Outputs by Events later in this section To trigger outputs manually see Triggering Outputs Manually later in this section a Center V2 1 17 3 Triggering Outputs by Event 1 On the Center V2 window click the Preference Setting button No 8 Figure 1 1 and select Notification The Alarm Settings dialog box appears 2 Select an event type for alarm output to be triggered Alarm Settings a Video Lost Alert Approach O Module Lost C Invoke Alarm VO Trigger Normal VO Trigger Emergency Connection Lost Subscriber Login C Send E Mail Alerts Subscriber Logout Camera Motion C Send SMS Alerts Surveillance System Abnormality Intruder Missi
118. r of online subscribers and displays the ID and status Right click any subscriber to call up a menu containing buttons No 4 8 9 10 and 11 The numbers of online subscribers and total subscribers are shown in brackets next to the Subscriber List Blue Icon Indicates the subscriber is online Gray Icon Indicates the subscriber is offline Alarm Icon Indicates either motion has been detected or the I O has been triggered at the subscriber s site Events can be sorted in these categories System Motion Trigger Connection Alarm Login Logout Wiegand Data Device Lost and Offline Event To sort the events click View from the menu bar and select My Favorite Events Displays a list of events occurred 151 GeoVision A list of Types and Messages will be displayed on VSM Type Motion Trigger Connection Alarm Login Logout 152 Message Camera xx detected Motion Module xx Input xx Triggered Module xx Input xx Trigger Resume Camera xx Video Lost Video Signal of Camera xx has resumed Module xx Lost Module xx has resumed to normal There isn t enough space for recording Connection Lost Multicam Surveillance System has been closed Status change of monitoring cameras on camera xx off camera xx Keep Days xx Alarm of Video Log is lower than xx days Schedule Start Stop An unexpected error occurred in Mulicam Surveillance System Error Code 1 or 2 There is an intruder Missing Object Una
119. recorded files is Center V2 Data subscriber Live You can also start recording manually and instantly when you see any suspicious live images To start recording manually 1 To start recording manually the live view must be enabled already See 1 6 Live View 2 To start recording move your cursor to the live view and click the icon on the channel heading 3 To stop recording move your cursor to the live view and click the icon on the channel heading 4 A message labeled with Manual appears on the Event List Figure 1 19 Note The default path for recordings started manually is Center V2 Data subscriber Manual For related recording and storage settings see 1 15 4 Recording Settings 36 a Center V2 1 8 Playback You can play back the video events saved on the Center V2 by clicking the attachments on the Event List or play back the video events recorded on the remote subscriber 1 8 1 Attachment Playback When you click the attachment of an event the EZ player will appear for playback operations Figure 1 20 Adds effects to the image including the options of Brightness Contrast Smooth Sharpen Grayscale L Toos and Undo The other options include Copy Save As an image or an avi file Print and Setup 2 Zoomin Zooms in the video 3 Zoom Out Zooms out the video 37 GeoVision No Name 4 Move 5 Play 6 Pause 7 Stop 8 Previous Frame 9 Next Frame 10 Top Fra
120. retry modes and communication ports between GV System and Center V2 General Settings Connection Broken Codec Maximum Retries Geo Mpeg4 Retry Interval 5 Sec C Geo H264 WV Retry until connected Retry in the background Connective Port D Command Port 5548 Default Data Port 5549 Default Connection Port 5545 Default Temp Folder Path EDVR V833_Release GV 84 CCTemp a H canoa Figure 1 9 22 a Center V2 Connection Broken E Maximum Retries Sets the number of retries if connection is not immediately available Retry Interval Sets the interval between retries Retry until connected Keeps GV System on trying until connected to Center V2 E Retry in the background Hides the retries in the background Codec Selects Geo Mpeg 4 default or Geo H264 as the compression method for video sent to Center V2 Connective Port Displays ports used for communication It is recommended to keep the default settings unless otherwise necessary To automatically configure these ports on your router by UPnP technology click the Arrow button For details on UPnP settings see UPnP Settings Appendix Temp Folder Attachments are temporarily stored in this folder while waiting to be sent to Center V2 In case the connection is broken attachments meant to be sent to Center V2 could be found here Once the connection is back to normal events saved in the Temp Folder will be sent
121. rgency occurs 26 a Center V2 Other Allow Center V2 to Get System Information Allows Center V2 to get system information on your GV System Send Alert Message of POS s Loss Prevention to Center V2 Notifies Center V2 about the events of POS Loss Prevention Time synchronization with Center V2 Enables the time increment decrement of minutes and seconds at the subscriber site to match the time at the Center V2 Notify Center V2 when the storage space was full Notifies the Center V2 when the subscriber s storage space is insufficient Notify Center V2 when Wiegand Event occurs This option is designed for the access control application with GV Wiegand Capture When the GV System receives the card number from GV Wiegand Capture the number can also be sent to the Center V2 Note When Time synchronization with Center V2 is selected the function of time synchronization will be activated as soon as the Center V2 is started up and it will be re activated every 12 hours I O Device The settings define which I O condition to notify Center V2 To configure these settings first disable the Monitor all type events option in Figure 1 8 Note this tab is only accessible when one or more I O device is installed to GV System 27 C GeoVision Advanced Settings Camera Other 1 0 Device VO Device Module 1 v M Allow Center 2 to Enable Disable KO Input 1 V Send to Center 2 when VO is triggered Event Type
122. rs Figure 1 39 62 a Center V2 2 Select Setup This dialog box appears Modify text Setas default Red Flag Default W Blue Flag Y Yellow Flag Green Flag Orange Flag Y Purple Flag J Flag Complete Figure 1 40 Select the desired flag and then click the Modify text button A list of text options appears Select one desired text Pending Assigned In Process Progressed Resolve and Reject or select User Define to customize your own flag text 63 C GeoVision 1 13 2 Using the Event Tabs On the bottom of the Center V2 window events are sorted under different tabs according to the type You can utilize these tables to quickly monitor events by type and configure the Customized Event tab which contains self chosen event types Note This feature is only supported by the Professional version 64 az Camera 5 Camera 4 FR Cameras May 10 15 33 13 29 86 GB 2 l Taipei DRI a l Tokyo OOOE 66066 IY ID Type Message Message Time Start Time DVR1 Device Lost Camera 7 Video Lost 5 10 2011 3 28 31PM 5 10 2011 3 28 31 PM 4 DYR1 Device Lost Camera 8 Video Lost 5 10 2011 3 28 31 PM 5 10 2011 3 28 31 PM F DYR1 Device Lost Camera 9 Video Lost 5 10 2011 3 28 31 PM 5 10 2011 3 28 31 PM DVR1 DeviceLost Camera 10 Video Lost 5 10 2011 3 28 31PM 5 10 2011 3 28 31 PM Y DYR1 Device Lost Camera 11 Video Lost 5 10 2011 3 28 31 PM 5 10 2011 3 28 31 PM
123. rval SettingS cesssssseeeeeeeeeeeeesseeseesssseeeees 183 Sil Output Aleris oina 184 3 14 1 Configuring a Local GV I O BOX cccceececeeeeeeeeteeeeeeeeeees 184 3 14 2 Configuring a Virtual GV I O BOX cccccccceeeeeetteeeeeeeeeeees 184 3 14 3 Triggering Outputs by Event ccccceeeeeeeeeeeeeeeeeeeeeeeees 184 3 14 4 Triggering Outputs Manually ccccccceeeeeeeeeeeteeeeeeeeeees 185 219 SMS AETS nennen 186 3 15 1 Setting SMS Server isssnstracccnnacentinicnrrrccnrnnniceeeeetnccrriansaacans 186 3 15 2 Sending SMS cc ccccccccssssceeeeeeeeeeeeeeeeeeeeeeeeeaeeeaaeeeaaaaaaaaaaes 186 3 15 3 Inserting Device Information cccccceeeeeesseeeeessseeeeeees 187 3 16 E Mail Alerts usss inia s 188 3 16 1 Setting Mailbox 2 cicccccesccccccccceccececcccccecccccccccccccccccccccceccecesedees 188 3 16 2 Sending E Mail nnnnnnnnnnneeeeeeerrerrrrerrrrrrrrrererrrrrrrrererereren 188 3 16 3 Inserting Device Information cccccceseesseeeeeeeeeeeeeeeeeees 189 3 17 Temperature Alarim ccccccccceseseeeeeeeseeeseeeeeneeeneeeseeeeeeeenes 190 318 Event CHAD sosanna sei a E aari 192 3 19 Failover SOMrVeM ocicccsicccescscetscacccacsecsisccsavscecsearesaiseascaccasnecass 193 PORNO scien iii een 194 A Dongle Description cccceseeeeeeeeeeeeeeeeeeneeeeeeseneeeeneeeeaeneeees 195 Dongle options for Center V2 ccccccccccceeeeeesesseseeeeeeeeeeeeessesaaaeees 195
124. s 148 a Vital Sign Monitor 3 2 Installation 1 Connect the GV USB Dongle to the computer 2 Insert the Software DVD to your computer It runs automatically and a window appears 3 To install the USB device driver select Install or Remove GeoVision GV Series Driver and select Install GeoVision USB Device Drivers 4 To install the Vital Sign Monitor select Install GeoVision Primary Applications 5 Click GV Vital Sign Monitor and follow the on screen instructions 149 C GeoVision 3 3 The VSM Window Subscriber List 2 2 x Motion Connection System System Login Logout Login Logout System System Motion Motion Motion Alarm Motion Motion Motion Motion Motion Motion Motion Motion Motion Motion Motion Camera detected motion The network connection is lost Stop Service Start Service Login Login Start Monitoring All Type Events Stop all cameras monitoring Camera detected motion Camera detected motion Camera detected motion Multicam Surveillance System don t have responded Camera detected motion Camera detected motion Camera detected motion Camera detected motion Camera detected motion Camera detected motion Camera detected motion Camera detected motion Camera detected motion Camera detected motion Connection Alarm Login Logout Wiegand Data Trigger Device Lost 7 12 2011 5 04 08 PM 7 12 2011 5 04 08 PM 711242011 5 04 09 PM 7 12 2011 5 04 38 PM
125. scriber Account 1 4 120 On the Dispatch Server Window click the Account button 2 The Address Book window appears Click the Add a Group button to create a group Click the Add a Server button to to create a Center V2 server account A server icon pops out Rename the server to match the location name created for the Center V2 server PH Address Book Preference y m Sr a e3 3 S 2 MOE gt b o General Layout Network Record Dispatch Server amp Address Book ID Password Telephone H Telephone O Mobile Phone E mail Group 1 Location Name 7 C Assign IP Information of Center 2 Network Settings C Enhance Network Security lt Statistics Group 1 Server 1 Subscriber 1 25000 ConteV2 Pot S547 B Accept connections from GY Compact DYR Video Server amp IP Cam Pot2 5551 D Dispatch Server Note Any changes of this property will be applied in the next startup Center V2 Server Figure 2 3 Click the Add a Subscriber button to create a subscriber account The Subscriber Address Book dialog box appears a Dispatch Server 5 Create an ID and password for the subscriber The ID and password will be used when the Center V2 s subscriber wants to log into the Dispatch Server Subscriber Address Book ID Password Item Content Name Address E mail E mail 2 Country Calling Code 1 Telephone H Telephone 0
126. single monitor 9 20 or 42 screen divisions for dual monitors In the 1280 x 800 resolution select 6 12 24 screen divisions for a single monitor 9 16 30 screen divisions for dual monitors For resolution see Layout Settings later in this chapter Closes or minimizes the Center V2 window Flags an event for later reference Displays the Alarm Report dialog box Indicates an event coming with an attachment Double click the event to open the attached video file GeoVision No 17 18 19 20 21 22 Name ID Event Type Message Message Time Start Time Event Categories Description Indicates a subscriber s ID Indicates the event type Alarm Attachment Connection Login Logout Motion System Trigger and Wiegand Data Indicates associated information for each event type Indicates when Center V2 receives an event Indicates when an event happens at the subscriber s site Sorts events by types including All System Motion Trigger Connection Alarm Login Logout Attachment Wiegand Data Device Lost Offline Event and Customized Event The function is only available for the Professional version For details see 1 13 2 Using the Event Tabs a Center V2 The types and messages displayed on Center V2 Type Motion Trigger Connection Alarm System Attachment Message Camera xx detected motion Module xx triggered Camera xx video lost Module xx I O lost N
127. stern European Windows v E Mail To geo taipei geovision com tw E Mail From geo geovision com tw Subject test SMTP Server geovision com tw Mean Rig Test Mail SMTP Port 25 Defaut tesi M This server requires an encrypted connection SSL SMTP Server requires authentication Account ID 123 Password Alert Setup E Mail Alert Interval in Figure 1 71 In the Charset field select the set of characters and symbols that the e mail uses In the E Mail From field enter your e mail address In the SMTP Server field type the outgoing server address If your e mail server requires an SSL Secure Sockets Layer authentication for connection select This server requires an encrypted connection SSL a Center V2 If your e mail service provider requires authentication for sending e mails select SMTP Server requires authentication and type the account ID and password of your SMTP If you want to set time intervals between each e mail message when alert occurs in the Alert Setup field set the interval between 0 and 1440 minutes Click OK Sending a test e mail After setting up your mailbox you can use the Test section and send a message to your own e mail account for testing NS Enter your own e mail address in the E Mail To field Enter a subject for the e mail Type the desired message in the Mail Content field Click the Test Mail button 99 C GeoVision 1 19 2 S
128. storage space is insufficient The space limit is 1 GB at least Notify Vital Sign Monitor when the storage space is full Notifies the VSM when the subscriber s storage space was full 163 GeoVision Notify Vital Sign Monitor when any storage is lost Notifies the VSM when the storage device is lost Other 164 Time synchronization with Vital Sign Monitor Enables the time increment decrement of minutes and seconds at the subscriber site to match the time at the VSM Send Alert Message of POS Loss Prevention to Vital Sign Monitor Notifies the VSM when abnormal POS transactions occur Notify Vital Sign Monitor when the user logs in or is changed Notifies the VSM when the GV System logs in or a different user logs in Notify Vital Sign Monitor when the user fails to log in Multicam Notifies the VSM when the GV System users fail to log in by typing wrong IDs or passwords Notify Vital Sign Monitor when the USB Protection Key is removed Notifies the VSM when the USB Protection Key is already removed from the GV System Notify Vital Sign Monitor when the Multicam starts recycling Notifies the VSM as soon as the recycle starts Send temperature status to Vital Sign Monitor Notifies VSM operator when the subscriber internal temperature reaches or exceeds the critical temperature specified Send POS device connection status to Vital Sign Monitor Notifies the POS connection status to the VSM a Vital Sign Mo
129. the Dispatch Server program for the mode to take effect Right click any online subscriber and select Camera Audio Control to see the enhaced live video 134 a Dispatch Server 2 14 Log Browser The following two log browsers let you locate the events of Dispatch Server and Center V2 Servers easily 2 14 1 Dispatch Log Browser The browser lets you view and locate the system status of Dispatch Server the login out status of Center V2 Servers Click View on the window menu and then select Dispatch Log to display the following log browser For details on Log Browser see 1 14 Event Log Browser E DVR V833_Release CMS_84 Dispatch_84 LogWispatch20030810 mdb DispatchLog Browser Sal File Tools View FEALE Message Time Application Type ID Status Message 8 10 2003 11 01 13 AM Dispatch Server TEST144 DF98DC2 Account Add a subscriber 127 0 0 1 8 10 2003 11 01 52 AM Dispatch Server TEST144 DF98DC2 Account Modify a subscriber 127 0 0 1 gt GY 8 10 2003 11 02 57 AM Dispatch Server TEST144 DF98DC2 System Start Dispatch Server Ready Total event list 3 NUM Figure 2 12 A list of Status and Messages will be displayed Status Message Start Dispatch Server Failed to start Dispatch Server Stop System Dispatch Server Can t find KeyPro Start to recycle the Dispatch Server Start to recycle the CenterV2 Event Log CenterV2 Server IP CS_IP connects to Dispatch Server CenterV2 Server IP CS_IP disconnects from Disp
130. the Event List window to a separate monitor while the monitoring windows are displayed in the current monitor For the application your VGA card needs to support Twin View and your Windows desktop must be properly set up for the display across two computer monitors Preference General Layout Network Record Dispatch Server Layout Screen Resolution M x 768 Main Panel Resolution 1024 768 i v C Floating Event List Cl Topmost Window Note Any changes ofthis property will be applied in the next startup Figure 1 55 Screen Resolution Detects the current screen resolution on your PC E Main Panel Resolution Sets the Center V2 panel resolution to 1024 x768 1280 x1024 1600 x 1200 1680 x 1050 1920 x 1200 1920 x 1080 1280 x 800 or 1440 x 900 The new resolution is effective after next login m Floating Event List Moves the Event List window to a separate window at the bottom the right side or hide the window 80 a Center V2 Note To view the hidden Event List click the Tools button No 5 Figure 1 1 and then select Maximize Event List to display the Event List E Topmost Window Keeps the Center V2 window on top of other window or dialog box 81 C GeoVision 1 15 3 Network Settings 82 Preference General Layout Network Record Information of Center 2 Location Name TEST151 C Assign IP Network Settings C Enhance Network Security Center 2 Port
131. the Subscriber List No 4 Figure 1 1 and select E Map The Remote E Map window will appear When motion or input trigger is detected on the subscriber the camera or input icon on the E Map will blink for alert You can also double click the camera icon to see its live view 1 20 1 The E E Map Window IP Address 127 0 1 Change 1 0 x New Map New Map PDIIDIAA9 Figure 1 72 101 GeoVision The controls on the Remote E Map window No Name 1 Login 2 Host Information 3 Previous 4 Home 5 Next 6 ViewLog 7 Configure 8 Tree List 9 IP Address 10 Blinking Icon 11 Output Icon Camera Dome 12 Icon 102 Description Click to log in up to 500 hosts Click to view the information of incoming events upon motion detected and I O devices triggered Click to go to the previous E Map file Click to back to the top of the tree view Click to go to the next E Map file Click to access the Remote ViewLog function Click to configure the Remote E Map The list displays all created E Map files and folders Displays the IP Address of the connected host The blinking icon represents a triggered camera or I O device Click to manually force the output device Click to view the live video associated with that camera dome Up to 16 live videos can be accessed simultaneously a Center V2 1 20 2 Configuring the Remote E Map Click the Configure button No 7 Figure 1 75 to display the follow
132. time Arrival The button becomes available after you select a notified authority Type the arrival time of the authority E Measures Select the measure taken to deal with the event Other The button is available only when the e mail and or SMS alert are configured m Print Prints out the alarm report When you finish the report and will not change the contents click the End Report Or click Save to edit later 59 C GeoVision 1 12 2 Editing Alarm Report Categories The items in each category of the Alarm Report can be customized and edited to meet your needs The changes made here will be available for each report 1 Onthe Center V2 window click the Preference Settings button No 8 Figure 1 1 and select Customize Alarm Report This dialog box appears Customize Alarm Report Event Type Description Measurement Taken Patrol Real Alarm False Emergency Alarm Emergency Alarm Video of Accidental Alarm Video of Real Alarm Figure 1 38 2 Click the desired category tab Event Type Description Measurement Taken and Patrol to make the necessary changes 3 Click OK to save the changes 60 a Center V2 1 12 3 Printing Alarm Reports You can print out the alarm reports along with filtered logs 1 To filter the logs with alarm reports click the Tools button No 5 Figure 1 1 select View Event Log and click the Filter button The Filter window appears 2 Click the Clipboard ico
133. tion of the video attachment Pos Rec Motion Determines how many seconds of video to be sent after motion stops Alerts interval Determines the interval between notification messages attached with video clips Attachment option Record by I O trigger Defines the duration of the video attachment delivered upon I O trigger The three options are the same as those in Attachment option Record by Motion above Subscriber s Recorded Files Receives up to 15 minutes of pre event and post event recordings respectively for the selected event from this subscriber These video attachments provide the Center V2 administrator information of what happened before and after the event Note this function is only applicable to these event types Motion I O Trigger Video Signal Resumption Intruder Crowd Detection Unattended Object Scene Change Missing Object Advanced Unattended Object Advanced Scene Change and Advanced Missing Object 17 C GeoVision Select the desired event type click the Pre Event Attachment and or Post Event Attachment column and select the number of clip files to be attached with a notification message For example if the subscriber is set to record for 1 minute per clip and the pre event attachment is set to 15 as illustrated in Figure 1 5 you will receive 15 notifications with attachments when the selected event occurs However if the subscriber is set to record for 5 minutes per clip you will receive 3 not
134. to define several filter commands for search Click the Add New Command button to add a new filter command When you click OK all events matching the defined commands will be listed on the Event Log Browser Removing Filters Select the filter command you wish to remove from the filter list and then click the Remove Selected Command button to remove it 72 a Center V2 1 14 3 Backing up the Event Log You can back up logs to a local drive or export them to CD and DVD 1 On the Event Log Browser click the Backup button No 7 Figure 1 47 This dialog box appears Media Selection C E Backup path DACenterv2 G amp Temp folder CADocuments and Settingsitest 85 Desk Available space 720 25 MB Option Backup alarm report files Backup attachment AVI files Check the storage space before backing up Note Select this option requires more time to complete the task Cancel Figure 1 50 To back up logs to a local drive select Backup Path click the button and assign a location wehere you want to save the files To export logs to CD and DVD select Temp folder click the button and assign a location for temporary storage of backup data Select whether you want to back up alarm reports and AVI files along with logs Click OK 73 C GeoVision 6 If you select Temp folder this dialog box appears for further setup Backup to CD DVD Media Using CD DVD ol AOPEN CD RVY
135. trol Center and Center V2 cannot be run together and Center V2 and Dispatch Server cannot be run together The Black Dongle can be upgraded to include more functions It is required to install drivers from the Software DVD for the Black Dongle to work Dongle options for Center V2 e Center V2 Pro e Center V2 VSM Connection of GeoVision IP devices to Center V2 The Center V2 accepts any video stream from GeoVision IP video devices There is no need to use an extra dongle Currently Center V2 does not support the video streaming from third party IP video devices Dongle options for Dispatch Server Dispatch Server Dispatch Server VSM 195 C GeoVision Dongle options for VSM VSM VSM Control Center VSM Control Center Video Wall VSM Center V2 VSM Dispatch Server 196 Appendix B Upgrading the Black Dongle The Black Dongle can be upgraded to include more functions or enhance the system You need to collect the data from your dongle and send it back to GeoVision for an upgrade The upgrade is a charged service To upgrade your dongle follow these steps 1 Each dongle has its own serial number Find it on the side of the dongle Later this serial number will be used in naming the files for upgrading SIC 7116442 C Geovision Figure B 1 Insert the dongle to the computer In the GV folder double click GVUsbKeyUpClient exe This dialog box appears USB Keys Information
136. ttended Object Alert Message of POS Scene Change Crowd Detection Advanced Missing Object Advanced Unattended Object Advanced Scene Change Critical Temperature Alarm xx C or Critical Temperature Alarm xx F Login X succeeded to log in Surveillance System Logout Type System Wiegand Data Vital Sign Monitor Message Start End Service Fail to Start Service Stop all camera monitoring Start all camera monitoring Start monitoring all type events Stop monitoring all type events Service hour engaged Still waiting for subscriber to log in Unexpected subscriber logout during service times Can t find USB Protection Key Disk Error The Multicam Surveillance System starts recycling Storage 1 The POS is offline POS 1 Mapping Camera x IP address Card No xxxxxx Camera xx Note Error Code 1 indicates a codec error Error Code 2 indicates that users can t write or record any data due to HD failure or user privilege 153 C GeoVision 3 4 Subscriber Account The VSM can serve up to 1 000 subscribers at a time Create at least one subscriber before starting VSM services To create a subscriber follow these steps 1 Onthe VSM widow click the Account button No 2 Figure 3 1 to display the Address Book window BE Address Book G2 X HS 8 Address Book ID Name Telephone H Telephone 0 Mobile Phone E mail Address gy Taiwan 1 Geovisi 02 87978337 geo geovision com tw Neih
137. tton to apply the same settings to all cameras Event Type Select Emergency for VSM to be notified of the alert event from this subscriber Select Normal for the VSM to be notified of the alert event only when an assigned input is triggered at this subscriber or when the time is within the established schedule 159 C GeoVision Note To assign an input or set up a schedule for sending trigger notifications see Security Service I O Device and Monitoring Schedule respectively E Counter Alarm In Out Set a number to receive a notification when the count result In number Out number exceeds the specified number Note that the Object Counter function must be enabled and Counter Alarm must be selected under the Event Type list I O Device The settings define which I O condition to notify the VSM To configure these settings first disable the Monitor all type events option in Figure 3 4 Note this tab is only accessible when one or more I O device is installed to GV System Advance Settings General Camera 1 0 Device System Information VO Device M Allow Vital Sign Monitor to Enable Disable KO I Notify Vital Sign Monitor of the monitoring status Input 1 3 gt Module 1 Notify Vital Sign Monitor when VO is triggered Event Type Emergency v M Output Module Mod 1 Pin1 v Event Type Emergency Output 1 KI Security Service Momentary Mode MV Start monitoring normal events when the sele
138. u Taipei Taiwan gt Group 2 Subscriber 2 Figure 3 2 2 Click the Add A Group button to create a group folder 3 Click the Add A Subscriber button to display the Subscriber Address Book dialog box 4 Enter a login ID and password required Those will be the ID and Password for the subscriber to log in to the VSM See Figure 3 3 5 Enter the subscriber s contact information in the rest of fields optional gt If you wish to send e mail alerts to this subscriber type its e mail address Up to two e mail accounts can be created for the subscriber For e mail settings see E Mail Alerts later in this chapter gt If you wish to send SMS alerts to this subscriber type its country code and mobile number Up to two sets of mobile number can be created for this subscriber For SMS server settings see SMS Alerts later in this chapter 6 Click OK This adds the subscriber to the group folder created before Returning to the VSM window you will see a message Add a subscriber xxx Subscriber xxx has been added 154 a Vital Sign Monitor 3 5 Service Startup After subscriber accounts are created the VSM is ready to provide services Clicking the Start Stop Service button No 1 Figure 3 1 on the VSM window to receive signals from subscribers 155 C GeoVision 3 6 Connection to VSM A single GV System can connect to up to 5 VSM centers simultaneously for center monitoring
139. u can define the frequencies of the motion detected and video lost alert messages Click Configure on the window menu and select Alerts Interval to open this dialog box Alerts Interval Camera Motion PostMotion 10 Seconds Event Interval Min Camera Motion 30 Video Lost 30 Figure 3 18 Post Motion Specify how long the incoming alert messages of motion detection stay red highlighted on the Event List No 21 Figure 3 1 E Event and Alerts Interval Specify the interval between the incoming messages upon motion detection or video lost Select the event type and click on the interval column to change the period of time Note The alert messages for the two types of events will still be shown on the Event List even if you don t select them The settings here only affect the frequency of displaying the alert messages 183 C GeoVision 3 14 Output Alerts You can activate output devices installed at the VSM site local and or through the network virtual to warn the VSM operator when events occur Up to nine 9 GV I O Boxes including local and virtual can be connected to a single VSM Note Only 8 port and 16 port GV I O Boxes can be installed through the network 3 14 1 Configuring a Local GV I O Box On the window menu click Configure and then select Local I O Device This I O Device dialog box appears For setup details see Configuring a Local GV I O Box in 1 17 Output Alerts 3 14 2
140. uage and click Search Ss MultilingualConfig Language Tools Version motion detection English Select windows for motion detection Ignore motion detection for defined region Multilingual Text Seleccionar ventanas para deteccion de movimiento Ingorar detecci n de movimento en Regi n definida Decode all frames upon motion detection 1 Define Detect Region y n Define the detect region y p Maximum number of motion detection regions has been re Decodificar todos los fotogramas sobre detecci n de movi 1 Definir la Regi n de Deteccidn y n Definir la Regi n de Se alcanz el n mero maximo de regiones de detecci n d Figure l 2 Note 1 The search is case sensitive 2 Before making any revision click Tools and select Revision Note to read the revision instructions 6 Double click the text you want to revise This dialog box appears Size rin Define the maximun and minimum size of objects For motion detection E definir el m ximo y m nimo tama o de objetos para la Detecci n de Movimiento gt Cancel Figure I 3 209 C GeoVision I Revise the translated text and click OK Tip The text may contain symbols such as d or n that instruct the application to perform certain functions Be careful not to change the symbols in the translated text To apply the revised text 1 210 To apply the revised translation to the app
141. ual on the Software DVD Notify Center V2 when the following events come up Notifies Center V2 when any of these alert events occur Intruder Missing Object Unattended Object Scene Change Crowd Detection Advanced Missing Object Advanced Unattended Object and Advanced Scene Change Event Type To always notify Center V2 of these alert events select Emergency If the subscriber wants Center V2 to get notified of these alert events only when an assigned input is triggered or within the established schedule select Normal Note To assign an input or set up a schedule for sending trigger notifications see Security Service I O Device and Monitoring Schedule respectively 25 C GeoVision Other Define other communication conditions between GV System and Center V2 Advance Settings Camera Other 1 0 Device Audio iV Allow Audio Out to Center 2 iV Accept Audio In from Center 2 Other F Allow Center 2 to Get System Information V Send Alert Message of POS s Loss Prevention to Center 2 Time synchronization with Center 2 iV Notify CenterY2 when storage is full IY Notify Center 2 when Wiegand Events occur Figure 1 11 Audio Applies any of these options here may generate privacy issues Think before you make any selection Allow Audio Out to CenterV2 Allows Center V2 to listen to the audio from GV System E Accept Audio in from CenterV2 Allows Center V2 to use the talkback feature when eme
142. utomatically 4 Filter Defines the search criteria 5 Refresh the Filter Result Refreshes the filter result 69 C GeoVision No 9 10 Name Description Provides the daily weekly and monthly event Charl statistical charts based on different criteria Exports the current event list and video Backup files Creates a header and footer for the Page Setup l printout of the event list Print Prints the current event list Exit Exits the browser 1 14 1 Opening the Event Log Click the Open button No 1 Figure 1 47 to launch the following Open Database dialog box Define a time period and select the type of database If you want to open the logs created by the system select System Log if you want to open the logs you have backed up in a local drive or CD DVD select Backup Log Then assign the log path After clicking OK the events matching the search criteria will be loaded to the Event Log Browser 70 Open DataBase Select the period of database to open 5 572003 wl CY 5f 7 2003 Note Select only between 1 62 days Open Type Option System Log Backup Log Path D Center V2 EventLog m Cancel Figure 1 48 a Center V2 Note By default the displaying period of time is one day the type of database is System Log and the log path is at Center V2 EventLog The default displaying period of time and log path can be modified by using the Event Log Settings Figure 1 52 For details on
143. y after they disconnect Text Format of SMS ASCII for English text limited to 160 characters Unicode for other languages limited to 70 characters Note To automatically send E mail and SMS alerts when alert conditions occur ensure to set up e mail addresses and mobile numbers for each subscriber in the Subscriber Address Book Figure 1 3 88 a Center V2 1 17 Output Alerts You can activate output devices locally installed directly to the Center V2 server and or virtually through the network to warn the Center V2 operator when events occur Up to nine 9 GV I O Boxes including local and virtual can be connected to one Center V2 Server Note i Only 8 port and 16 port GV I O Boxes can be connected to Center V2 through Ethernet The GV I O Box must be installed in the same LAN with the Center V2 server 1 17 1 Configuring a Local GV I O Box ls On the Center V2 window click the Preference Setting button No 8 Figure 1 1 and select Local I O Device This dialog box appears Local I O Device Output 1 Name Module Device Port Address Signal Type Select I O Device Device GVIO i Port COM1 v Address 1 v Figure 1 61 Select the Device Port and Address using the drop down lists and then click the Add button Click OK to finish adding the GV I O Box To trigger outputs automatically by event see Triggering Outputs by Event later in this section To trigger out
144. ys to send SMS messages to subscribers See the Center V2 window for the following selections 1 Click the Tools button No 5 Figure 1 1 and select Send Short Message This sends SMS to an individual subscriber manually 2 On the Subscriber List No 4 Figure 1 1 right click one subscriber and select Send Short Message This sends SMS to an individual subscriber manually 3 On the Event List double click one Event Type except Attachment to call up a message window Click the Send Short Message icon on the window This sends SMS to an individual subscriber manually 4 Right click one display channel and select Send Short Message This sends SMS to an individual subscriber manually 5 Click the Preference Settings button No 8 Figure 1 1 and select Notification to display the Alarm Settings window Check the Send SMS Alerts item This sends SMS to subscribers automatically when set alert conditions occur For details see Notification Settings earlier in this chapter 95 C GeoVision 1 18 4 Inserting Device Information The subscriber name and ID can be inserted automatically into your SMS message when it is sent out 1 Onthe Center V2 window click the Preference Settings button No 8 Figure 1 1 and select Notification This dialog box appears Alarm Settings Alert Approach m video Lost VO Module Lost Clinvoke Alarm VO Trigger Normal KO Trigger Emergency C Output Module Connection Lost

Download Pdf Manuals

image

Related Search

V8.5.9.CMSManual(CSV859 A EN).

Related Contents

No.76 BOILER - Oil Tech Talk  Hampton Bay EJ8014 Instructions / Assembly  Boletim do Trabalho e Emprego N.º21 de 2007  Funcionamiento  Polycom Intercom System 300 User's Manual    "取扱説明書"  Guidance - ArmyMWR.org  Symantec™ Client Management Suite 7.5 powered by Altiris    

Copyright © All rights reserved.
Failed to retrieve file