Home

User`s Manual

1. continued on next page 10 Connecting with your devices continued NOTE Before connecting the projector to a computer consult the computer s manual and check the compatibility of the signal level the synchronization methods and the display resolution output to the projector Some signal may need an adapter to input this projector Some computers have multiple screen display modes that may include some signals which are not supported by this projector Although the projector can display signals with resolution up to UXGA 1600X1200 the signal will be converted to the projector s panel resolution before being displayed The best display performance will be achieved if the resolutions of the input signal and the projector panel are identical e If you connect this projector and a notebook computer you need output the display to an external monitor or output simultaneously to the internal display and an external monitor Consult the computer s manual for the setting e Depending on the input signal the automatic adjustment function of this projector may take some time and not function correctly Note that a composite sync signal or sync on green signal may confuse the automatic adjustment function of this projector 442 If the automatic adjustment function does not work correctly you may not see the dialog to set the display resolution In such a case use an external display device You m
2. Adjusting the zoom and focus Press the D ZOOM or D ZOOM button on the remote control to display D ZOOM dialog on screen Use the D ZOOM and D ZOOM buttons to adjust the picture size To finish the operation do not touch these buttons for about ten seconds until the dialog is disappeared e f you want to expand a part of the image use the magnify function 428 D ZOOM button D ZOOM button continued on next page 25 Press the FOCUS or FOCUS button on the remote control or FOCUS or FOCUS button on the projector E15 while no menu is on screen to display the FOCUS box on screen Use the FOCUS and FOCUS buttons to adjust the screen focus After the focus adjustment wait for a while until the FOCUS box is disappeared if you want to display any other menu on screen by pushing the MENU button on the projector e The lt gt A V buttons on the projector work only as the cursor buttons while the template is displayed 1156 e FOCUS button on the projector is invalid when the USB TYPE A port is selected as the input source Using the automatic adjustment feature Press AUTO button on the remote control Pressing this button performs the following O For a computer signal The vertical position the horizontal position and the horizontal phase will be automatically adjusted Make sure that the application window is set to its maximum size prior to attemptin
3. NOTE The remote control signal reflected in the screen or the like may be available If it is difficult to send the signal to the sensor directly attempt to make the signal reflect e The remote control uses infrared light to send signals to the projector Class 1 LED so be sure to use the remote control in an area free from obstacles that could block the remote control s signal to the projector e The remote control may not work correctly if strong light such as direct sun light or light from an extremely close range such as from an inverter fluorescent lamp shines on the remote sensor of the projector Adjust the position of projector avoiding those lights Changing the frequency of remote control signal The accessory remote control has the two choices on signal Seg frequency Mode 1 NORMAL and Mode 2 HIGH If the remote control sc does not function properly attempt to change the signal frequency Do Gea two buttons listed below simultaneously for about 3 seconds Sr 1 Set to Mode 1 NORMAL VOLUME and RESET buttons 2 Set to Mode 2 HIGH MAGNIFY OFF and ESC buttons Please remember that the REMOTE FREQ in the SERVICE item of the OPTION menu 465 of the projector to be controlled should be set to the same mode as the remote control POSITION In order to set the Mode please keep pressing the combination of 2 Beer 1 E N Using as a simple PC mouse amp keyboard The a
4. 1 Turning on the PINLOCK select PIN LOCK and press the button or the ON ENTER button to display the PIN LOCK on off ars menu 1 2 Use the A V buttons on the PIN LOCK on PIN BOX off menu to select ON and the Enter PIN Enter PIN Code Code box will be displayed 1 3 Input a 4 part PIN code using the A W lt gt COMPUTER or INPUT button The PIN Code again box will appear Reenter agit the same PIN code This will complete the PIN itzi code reg istration OR ORGS COMPUTER e If there is no key input for about 55 seconds while the Enter PIN Code box or the PIN Code again box is displayed the menu will close If necessary repeat the process from 1 1 Afterwards anytime the projector is restarted after AC power is turned off the Enter PIN Code box will be displayed Enter the registered PIN code The projector can be used after entering the registered PIN code If an incorrect PIN code is input the Enter PIN code box will be displayed again PIN LOCK If an incorrect PIN code is input 3 times the projector will turn off Afterwards the projector will turn off every time an incorrect PIN code is input The projector will also turn off if there is no key input for about 5 minutes while the Enter PIN code box is displayed This function will activate only when the projector is started after AC power is turned off e Please do not forget your PIN code 2 Turning off the PINLOCK 2 1 Follow the procedure in 1 1 to display th
5. Blinking discre discre In Red tionary tionary Blinking In Red or Lighting In Red The lamp cover has not been properly fixed Please turn the power off and allow the projector to cool down at least 45 minutes After the projector has Blinking sufficiently cooled down please make confirmation of In Red the attachment state of the lamp cover After performing any needed maintenance turn the power on again If the same indication is displayed after the remedy please contact your dealer or service company Blinking In Red or Lighting In Red The cooling fan is not operating Please turn the power off and allow the projector to cool down at least 20 minutes After the projector has Blinking sufficiently cooled down please make confirmation In Red that no foreign matter has become caught in the fan etc and then turn the power on again If the same indication is displayed after the remedy please contact your dealer or service company Blinking In Red or Lighting In Red continued on next page 114 Regarding the indicator lamps continued POWER LAMP TEMP Describtion indicator indicator indicator P There is a possibility that the interior portion has become heated Please turn the power off and allow the projector to cool down at least 20 minutes After the projector has sufficiently cooled down please make confirmation of the following items and then turn the power on again e
6. amp COMPUTER _ Feature HDMI FORMAT AUTO automatically sets the optimum mode VIDEO sets the suitable mode for DVD signals COMPUTER sets the suitable mode for computer signals e When the COMPUTER is selected or when the AUTO Is selected and the projector recognizes that it receives computer signals the functions COLOR PICTURE menu TINT PICTURE menu and OVER SCAN IMAGE menu are unavailable Using the A V cursor buttons changes the digital range for input from the HDMI port AUTO amp NORMAL ENHANCED EEE Feature AUTO automatically sets the optimum mode M PAL N PAL NTSC 4 43 e If the contrast of the screen image is too strong or too weak try finding a more suitable mode continued on next page 41 item scription O The computer input signal type for COMPUTER IN1 and IN2 ports can be set 1 Use the A V buttons to select the COMPUTER IN port to be set 2 Use the lt gt buttons to select QAER the computer input signal type AUTO SYNC ON G OFF COMPUTER IN 2 COMPUTER IN Selecting the AUTO mode allows you to input a sync on G signal or component video signal from the port Please refer to Technical for the connection of component video input to COMPUTER IN1 2 port e In the AUTO mode the picture may be distorted with certain input signals In such a case remove the signal connector so that no signal is received and select the SYNC ON G OFF and then
7. 168 1 254 oo 255 255 255 0 1 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX1 11n g b a w jua 0 0 0 0 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX2 t 0 0 0 0 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX FF FF FF FF FF FF XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX4 TIME DIFFERENCE GMT00 00 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX5 DATE AND TIME 2011 1 1 0 00 11 CH ENCRYPTION SSID SPEED 4J RETURN nO lt RETURN 2 EXIT 4 PREVIOUS WIRELESS m i INFORMATION For details of PASSCODE refer to the manual for LiveViewer Nothing blank is shown in the PROJECTOR NAME 4478 and SSID 4174 field until you setup those items Only the first 16 characters of the PROJECTOR NAME e IP ADDRESS SUBNET MASK and DEFAULT GATEWAY indicate 0 0 0 0 in the following condition 1 The USB wireless adapter is not inserted into the projector 2 DHCP is ON and the projector does not get address from DHCP server Nothing blank is shown in the CH and SPEED fields if the USB wireless adapter is not inserted e The actual performance and setting will be shown in the CH field instead of the setting value in the WIRELESS SETUP menu e An icon is displayed to the left of the SSID of the device connected to the projector continued on next page 19 selecting this item displays the WIRED WIRED SETUP SETUP menu for the wired LAN i IP ADDRESS Use the A V buttons to select an item SUBNET MASK a DEFAULT GATEWAY and the gt or ENTER button on
8. Once you turn off the projector in the SAVING mode or the AC power the current date and time setting is reset Check 13 17 the DATE AND TIME setting for WIRELESS SETUP or WIRED SETUP in the NETWORK menu continued on next page 121 Phenomena that may be easy to be mistaken for machine defects continued Reference Phenomenon Cases not involving a machine defect When the Disconnect the LAN cable and check that the projector projector is is working properly connected to If this phenomenon occurs after connecting to the network wired LAN it there may be a loop between two Ethernet switching hubs powers off and within the network as explained below on as described _ There are two or more Ethernet switching hubs in a network Pte Two of the hubs are doubly connected by LAN cables owers off This double connection forms a loop between the two hubs POWER indicator Such a loop may have an adverse effect on the projector blinks in orange a as well as the other network devices few times Check the network connection and remove the loop by disconnecting the LAN cables such that there is only one Goes into connecting cable between two hubs standby mode USB memory is out of memory Unable to save Please delete unnecessary files to free up memory the CLONING Atleast 1MB of memory is needed data USB memory is write protected Unlock the USB memory Unable to find the saved data from USB memory Execu
9. and ur press the gt cursor button or ENTER button to males execute the item Then perform it according to the SECURITY following table PICTURE IMAGE INPUT E EASY MENU EXIT w ADVANCED MENU amp LANGUAGE MENU POSITION amp START UP A MyScreen EL MyScreen Lock MESSAGE EY SOURCE NAME TEMPLATE Ci C C COMPUTER IN 1 C SELECT ENGLISH BLACK ORIGINAL EXECUTE OFF ON TEST PATTERN 1024 x 768 60Hz ltem iescription Using the A gt buttons switches the OSD On Screen Display language ENGLISH amp FRANCAIS amp DEUTSCH amp ESPANOL shown in the LANGUAGE dialog Press the ENTER or INPUT button to save the language setting LANGUAGE MENU POSITION Using the A V 1 gt buttons adjusts the menu position To quit the operation press the MENU button on the remote control or keep no operation for about 10 seconds Using the A V buttons switches the mode for the blank screen The blank screen is a screen for the temporarily blanking feature 29 It is displayed by pressing the BLANK button on the remote control MyScreen ORIGINAL BLUE WHITE BLACK MyScreen Screen can be registered by the MyScreen item 153 ORIGINAL Screen preset as the standard screen BLUE WHITE BLACK Plain screens in each color e To avoid remaining as an afterimage the MyScreen or ORIGINAL screen will change to the plain black screen after several minutes
10. reconnect the signal Set the frame lock function on off for each port 1 Use the A V buttons to select the input ports FRAME LOCK 2 Use the lt gt buttons to turn the COMPUTER IN 1 COMPUTER IN 2 frame lock function on off HOM FRAME LOCK ON amp OFF e This item can be performed only on a signal with a vertical frequency of 49 to 51Hz 59 to 61 Hz e When ON is selected moving pictures are displayed more smoothly e This function is unavailable for a signal from the HDMI of 480i 60 or 576i 50 or 1080i 50 60 port continued on next page 42 item Description O The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector 1 In the INPUT menu select the RESOLUTION using the A V buttons and press the gt button The RESOLUTION menu will be ill RESOLUTION Ne displayed 1 STANDARD 1024 x 768 2 In the RESOLUTION menu select the Bs A eather state ies 3 STANDARD 1280 x 800 resolution you wish to display using A STANDARD 1860 x 768 the A V buttons 5 STANDARD 1366 x 768 i CUSTOM 1440 x 768 Selecting AUTO will set a resolution RETURN appropriate to the input signal 3 Pressing the gt or ENTER button when selecting a STANDARD resolution will automatically adjust the horizontal and vertical positions clock phase and STANDARD horizontal size q me a The INPUT_INFORMATION dialog will be Se re displayed 4 To set a cu
11. 59 item scription The lamp time is the usage time of the lamp counted after the last resetting It is shown in the OPTION menu Pressing the RESET button on the remote control or the button of the projector displays a dialog To reset the lamp time select the OK using the gt button CANCEL gt OK e Please reset the lamp time only when you have replaced the lamp for a suitable indication about the lamp e For the lamp replacement see the section Replacing the lamp LAMP TIME 1106 The filter time is the usage time of the air filter counted after the last resetting It is shown in the OPTION menu Pressing the RESET button on the remote control or the button of the projector displays a dialog To reset the filter time select the OK using the button CANCEL 5 OK e Please reset the filter time only when you have cleaned or replaced the air filter for a suitable indication about the air filter e For the air filter cleaning see the section Cleaning and replacing the air filter 108 FILTER TIME continued on next page 60 item i escription O This item is to assign one of the following functions to MY BUTTON 1 2 on the remote contro B46 1 Use the A V buttons on the MY BUTTON menu to select a MY BUTTON 1 2 and press the or ENTER button to display the MY BUTTON setup dialog 2 Then using the A W lt gt buttons sets one of the following functions to the chosen
12. DETECTOR is ON and the INSTALLATION status is changed the TRANSITION DETECTOR ON alarm 385 will be displayed when the projector is restarted Using A V buttons switches the standby mode setting between NORMAL and SAVING NORMAL SAVING When SAVING is selected the power consumption in the standby mode is lowered with some functional restriction as below e When SAVING is selected the RS 232C communication control except to turn the projector on and the network function are disabled while the projector is in the standby mode If the COMMUNICATION TYPE in the COMMUNICATION menu is set to NETWORK BRIDGE all of the RS 232C commands are disabled E66 STANDBY MODE When SAVING is selected STANDBY setting of AUDIO SOURCE 50 is invalid no signal is output from AUDIO OUT port and no sound from a built in speaker e When SAVING is selected STANDBY setting of MONITOR OUT is invalid and no signal is output from MONITOR OUT port in the standby mode e The USB connection is disabled while the projector is in standby mode if the STANDBY MODE item in the SETUP menu of the projector is set to SAVING e When SAVING Is selected CLONING load function is invalid while in STANDBY MODE continued on next page 48 item scription O While the image signal from the input port chosen in step 1 is projected the image signal from the input port selected in step 2 is output to MONITOR OUT port 1 Choose a picture input port us
13. Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries e Trademark PJLink is a trademark applied for trademark rights rajLink in Japan the United States of America and other countries and e Blu ray Disc and Blu ray are trademarks of Blu ray Disc Association areas All other trademarks are the properties of their respective owners 1 Ba Introduction asannnnnnnnnanann 3 Features aauaunaaaa aaa a aaa 3 Checking the contents of package 3 Partnames 4 Setting up 220 00 nee eee 7 Arrangement 00 T Connecting with your devices 9 Connecting to a power supply 15 Using the security bar and slot 15 Using the cable cover 16 Remote control 00 17 Installing the batteries 17 About the remote control signal 17 Changing the frequency of remote control signal 18 Using as a simple PC mouse amp keyboard 18 Power on off 2 0008000 19 Operating 002000 ewe 22 Adjusting the volume 22 Temporarily muting the sound 22 Selecting an input signal 22 Searching an input signal 24 selecting an aspect ratio 24 Adjusting the projector s elevator 25 Adjusting the zoom and focus 25 Using the automatic adjustment feature 26 Adjusting the position 2 Correcting the keystone distortio
14. LANGUAGE ENGLISH ADVANCED MENU EXIT COMPUTER IN 1 012345678901 1024 x 768 60Hz item i escription O ASPECT Using the lt buttons switches the mode for aspect ratio See the ASPECT item in IMAGE menu G37 Using the lt gt cursor buttons adjusts the magnification ratio Small Large See the D ZOOM item in the SETUP menu 44 e The on screen menu might be displayed outside of the image display area depending on the adjustment value of the ASPECT D ZOOM VY KEYSTON and GJ KEYSTONE Changing the values of ASPECT D ZOOM VY KEYSTONE and K KEYSTONE may fix the symptom Using the lt gt buttons corrects the vertical keystone distortion KEYSTONE cee the KEYSTONE item in SETUP menu 45 7 Using the lt gt buttons corrects the horizontal keystone distortion KEYSTONE cee the KEYSTONE item in SETUP Menu 145 Pressing the button displays the dialog for adjusting the shape PERFECT FIT of the projected image in each of the corners and sides See the PERFECT FIT item in SETUP menu 146 continued on next page 32 item escription O Using the lt gt buttons switches the picture mode The picture modes are combinations of GAMMA and COLOR TEMP settings Choose a suitable mode according to the projected source T NORMAL CINEMA amp DYNAMIC amp BOARD BLACK 1 P HOTO DAYTIME WHITEBOARD BOARD GREEN GAMMA COLOR TEMP NORMAL 1 DEFAULT 2 MID CINEMA DYN
15. NETWORK BRIDGE from the CONTROL port HALF DUPLEX FULL DUPLEX HALF DUPLEX This method lets the projector make two way communication but only one direction either transmitting or receiving data is allowed at a time FULL DUPLEX This method lets the projector make two way communication transmitting and receiving data at the same time e HALF DUPLEX is selected as the default setting e If you select HALF DUPLEX check the setting of the item RESPONSE LIMIT TIME 4467 continued on next page 66 ltem escription O O O O RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF DUPLEX through the CONTROL port OFF 1s 2s 3s ee j OFF Select this mode if it is not required to check the responses from the device that the projector COMMUNICATION sends data to In this mode the projector can send out data from the computer continuously 1s 2s 3s Select the time period to keep the projector waiting for response from the device that the projector sends data to While waiting the response the projector does not send out any data from the CONTROL port e This menu is available only when the NETWORK BRIDGE is selected for the COMMUNICATION TYPE and the HALF DUPLEX is selected for the TRANSMISSION METHOD M66 e OFF is selected as the default setting continued SERVICE continued The settti
16. Readjust the image position and or focus as necessary e Since the projector features an ultra short throw be aware that it is required to select a screen carefully to have better performance Asoft screen such as a pull down screen may cause serious distortion of a projected image A hard screen such as a board screen is recommended for use with this projector Ahigh gain screen such as a bead screen that has narrow viewing angle is not suitable for this projector A low gain screen around 1 0 such as a matte screen that has wide viewing angle is recommended for use with this projector Ascreen with a weave pattern may cause moire on the projected image which is not a failure of the projector A screen that has less moire effects is recommended for use with this projector continued on next page Arrangement continued WARNING P Place the projector in a cool place and ensure that there is sufficient ventilation The high temperature of the projector could cause fire burns and or malfunction of the projector e Do not stop up block or otherwise cover the projector s vents e Keep a space of 30 cm or more between the sides of the projector and other objects such as walls e Do not place or attach anything that would block the lens or vent holes e Do not place the projector on metallic thing or anything weak in heat e Do not place the projector on carpet cushions or bedding e Do not place the projector in direct
17. SCREEN OPTION NETWORK or SECURITY EXIT Press the lt or ENTER button to finish the OSD menu 30 HMO R menu SAUCES EN arent BRIGHTNESS 0 IMAGE CONTRAST From the PICTURE menu items shown in the table OMT LOM ca below can be performed SORE ATN F Select an item using the A V cursor buttons and press PESrA wou the cursor button or ENTER button to execute the Aral item Then perform it according to the following table BRIGHTNESS Using the P buttons adjusts the brightness Dark Light CONTRAST Using the lt gt buttons adjusts the contrast Weak Strong Using the A V buttons switches the gamma mode To adjust CUSTOM selecting a mode whose name includes CUSTOM and then pressing the gt button or the ENTER button spss da a dialog to aid you in adjusting the mode 7 SAMA CUSTOM This function is useful when you want to i Pht ddd change the brightness of particular tones Choose an item using the lt P gt buttons and adjust the level using the A V buttons You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button Each time you press the ENTER button the pattern changes as below No pattern gt Gray scale of 9 steps ttm Ramp Gray scale of 15 steps The eight equalizing bars correspond to eight tone levels of the test pattern Gray scale of 9 steps except the darkest in the left end If you want to adjust the 2nd tone from
18. The remote Control panel Web Remote control Control ENTER INPUT ENTER Displays thumbnail NOTE These operations are not accessible while the projector OSD is displayed e It is not possible to change the input port by using the INPUT button when the Thumbnail screen Slideshow or Full Screen is displayed e When the Slideshow mode is set to ONE TIME and the last file is a still image the last slide of the presentation will remain displayed until the ENTER button on the remote control or Web Remote Control or the INPUT button on the control panel is pressed 95 PC LESS Presentation continued You can play the Slideshow at your desired configuration Configure the Slideshow items in the Thumbnail 1 RETURN Returns to the thumbnail mode SLIDESHOW SELECT 2 PLAY Play the Slideshow PLAY EXECUTE 3 START Set the beginning number of the STOP 10 Slideshow ares ie TIME 4 STOP Set the end number of the Slideshow 5 INTERVAL Sets the interval time for displaying still images during the Slideshow It is not recommend to set the interval time very short something like several seconds because it may take more than several seconds to read and display an image file if it is stored in very deep layer directory or if so many files are stored in the same directory 6 PLAY MODE Select the Slideshow mode ONE TIME Play the Slideshow one time ENDLESS Play the Slideshow endless NOTE The settings
19. Using the A V buttons switches the mode for the start up screen The start up screen is a screen displayed when no signal or an unsuitable signal is detected MyScreen ORIGINAL OFF _ MyScreen Screen can be registered by the MyScreen item 53 ORIGINAL Screen preset as the standard screen OFF Plain black screen e To avoid remaining as an afterimage the MyScreen or ORIGINAL screen will change to the BLANK screen above after several minutes If also the BLANK screen is the MyScreen or ORIGINAL the plain black screen is instead used BLANK START UP e When the ON is selected to the MyScreen PASSWORD item in the SECURITY menu 183 the START UP is fixed to MyScreen continued on next page 52 item i escription O This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen Display the image you want to capture before executing the following procedure Selecting this item displays a dialog titled MyScreen It will ask you if You vian to start capturing ti you start capturing an image from the S current screen Please wait for the target image to be displayed and press the ENTER or INPUT button to start registration To restore the screen and return to the preion dialog press the RESET button on the remote control i MyScreen Registration may take several minutes When the registration is completed
20. a plug and play monitor using another plug and play monitor The BLANK screen is displayed Press BLANK button on the remote control port for picture input The projector does not recognize the USB storage device inserted into USB TYPE A port Before removing the USB storage device be sure to use the REMOVE USB function on the thumbnail screen which appears when the USB TYPE A port is selected as the input source Waiting for connection remains displayed even though the USB TYPE B port is selected Remove the USB cable and reconnect after a while The USB TYPE B port is selected as the picture input lat ig source even if MOUSE is selected for USB TYPE B Select USB DISPLAY for USB TYPE B in OPTION menu to 59 project the picture input to the port Otherwise select other continued on next page 119 Phenomena that may be easy to be mistaken for machine defects continued Cases not involving a machine defect Video screen The FREEZE function is working 29 display freezes Press FREEZE button to restore the screen to normal Color settings are not correctly adjusted Colors have a Perform picture adjustments by changing the COLOR TEMP COLOR 35 40 faded out TINT and or COLOR SPACE settings using the menu functions appearance or Color tone is COLOR SPACE setting is not suitable poor Change the COLOR SPACE setting to AUTO RGB SMPTE240 REC709 or REC601 The brightness and or contrast are
21. again If incorrect password is input 3 times the projector will turn off Afterwards the projector will turn off every time an incorrect password is input 3 Items shown in the table below can be performed If you have forgotten your password seers 1 While the ENTER PASSWORD box is displayed press and hold ee the RESET button on the remote control for about 3 seconds or ee press and hold the INPUT button for 3 seconds while pressing the Sy gt button on the projector Inquiring Code 2 The 10 digit Inquiring Code will be displayed Contact your dealer Nee is with the 10 digit Inquiring Code Your password will be sent after your user registration information is confirmed e If there is no key input for about 55 seconds while the Inquiring Code is displayed the menu will close If necessary repeat the process from 1 ltem ieseription 1 Use the A V buttons on the SECURITY menu EEE to select SECURITY PASSWORD CHANGE ENTER NEW PASSWORD and press the button to display the ENTER 0000 NEW PASSWORD box 2 Use the A gt buttons to enter the new password 3 Move the cursor to the right side of the ENTER NEW PASSWORD box and press the Estu SECURITY gt button to display the NEW PASSWORD Ieee RN O PASSWORD AGAIN box enter the same password again Dida CHANGE 4 Move the cursor to the right side of the NEW SEART PLEER PASSWORD AGAIN box and press the gt NOTE NEW PASSWORD button and the NOTE NEW PASS
22. as soon as possible Do not use old used lamps this is a cause of breakage Cleaning and replacing the air filter The air filter unit of this projector consists of a filter cover two kinds of filters and a filter frame The new double large filters system is expected to function longer However please check and clean it periodically to keep ventilation needed for normal operation of the projector When the indicators or a message prompts you to clean the air filter comply with it as soon as possible Replace the filters when they are damaged or too soiled To prepare new filters make contact with your dealer and tell the following type number Type number UX37191 Filter set When you replace the lamp please replace the air filter An air filter of specified type will come together with a replacement lamp for this projector 4 Turn the projector off and unplug the power cord Allow the projector to sufficiently cool down Use a vacuum cleaner on and around the filter cover Slide the filter unit upward to take it off from the projector Use a vacuum cleaner for the filter vent of the projector Oo KR UN Take the fine meshed filter out while holding the filter cover It is recommended to leave the coarse meshed filter in the filter cover as It Is 6 Use a vacuum cleaner on both sides of the fine meshed filter while holding it so it will not be sucked in Use a vacuum cleaner for the inside of t
23. button Press the ENTER or INPUT button to save the setting e LAN Selects input from LAN port e USB TYPE A Selects input from USB TYPE A port e USB TYPE B Selects input from USB TYPE B port e HDMI Selects input from HDMI port e COMPUTER IN1 Selects the input from COMPUTER IN1 port e COMPUTER IN2 Selects the input from COMPUTER IN2 port e S VIDEO Selects the input from S VIDEO port e VIDEO Selects the input from VIDEO port e SLIDESHOW Selects the input from USB TYPE A port and starts a Slideshow MY BUTTON e MY IMAGE Displays the MY IMAGE menu 479 e MESSENGER Turns the messenger text displayed on the screen on off Messenger Function in the User s Manual Network Guide When there is no transferred text data to display the message NO MESSENGER DATA appears e INFORMATION Displays SYSTEM INFORMATION INPUT_INFORMATION 470 WIRELESS INFORMATION 175 WIRED INFORMATION 77 or nothing e MY MEMORY Loads one of adjustment data stored L136 When more than one data are saved the adjustment changes every time the MY BUTTON is pressed When no data is saved in memory the No saved data dialog No saved data appears FN AiR When the current adjustment is not MY MEMORY saved to memory the dialog as shownin 5 f the right appears If you want to keep the current adjustment please press the gt button to exit Otherwise loading a data will overwrite the current adjusted condition continue
24. care of the mirror and lens being cautious of handling 4 Turn the projector off and unplug the power cord from the power outlet And cool the projector down by leaving it for a while as it is 2 The lens door can be opened manually Please hold both side of the lens door and slowly open it until it is locked with clicking sound 3 Use an air blower to blow away dust on the lens and on the mirror before wiping Wipe softly the mirror and lens with a damped soft cleaning cloth for lens on the market being careful not to give any damage on the mirror and lens 4 To close the lens door properly please take the following procedure 1 Insert the power cord with the lens door opened 2 The power indicator will light in orange and the lens door closes automatically Do not touch the lens door when the door is closing Do not allow anything to obstruct the lens door Cleaning cloth NOTE e When the lens door is closed manually it may not shut properly e The lens door may not close when the LENS DOOR LOCK function of the SERVICE item in the OPTION menu is set to ON Refer to the LENS DOOR LOCK function of the SERVICE item in the OPTION menu 464 Other care Inside of the projector In order to ensure the safe use of your projector please have it cleaned and inspected by your dealer about once every year Caring for the cabinet and remote control Incorrect care could have adverse influence such as discolorati
25. continued The horizontal or vertical frequency of the input signal is Dy COMPUTER IN 1 not within the specified range SYNC IS OUT OF RANGE ais ae Please confirm the specs for your projector or the signal source specs An improper signal is input Please confirm the specs for your projector or the signal source specs C COMPUTER IN 1 INVALID SCAN FREQ The internal temperature is rising Please turn the power off and allow the projector to cool down at least 20 minutes After having confirmed the following items please turn the power ON again e Is there blockage of the air passage aperture CHECK THE AIR FLOW e Is the air filter dirty e Does the peripheral temperature exceed 40 C e Is the projector used at an altitude of about 1600 m or higher If the projector is used at an altitude of about 1600 m or higher set ALTITUDE of the SERVICE item in the OPTION menu to HIGH 463 If the projector is used with a wrong setting it may cause damage to the projector itself or the parts inside ee A note of precaution when cleaning the air filter 4000 HRS PASSED AFTER THE Please immediately turn the power off and clean or change eons the air filter referring to the Cleaning and replacing the thet ME taeda air filter section of this manual After you have cleaned or RESET FILTER TIME changed the air filter please be sure to reset the filter time SEE MANUAL FOR FURTHER INFO m 60 108 Ss The button operation i
26. dealer to replace the lamp In case of replacement by yourself follow the following procedure 3 Loosen the screw marked by arrow of the lamp cover and then slide and lift the lamp cover to the side to remove it Loosen the 2 screws marked by arrow of the lamp and slowly pick up the lamp by the handle Never loosen any other screws Insert the new lamp and retighten firmly the 2 screws of the lamp that are loosened in the previous process to lock it in place While putting the interlocking parts of the lamp cover and the projector together slide the lamp cover back in place Then firmly fasten the screw of the lamp cover Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu 1 Press the MENU button to display a menu 2 Point at the ADVANCED MENU in the menu using the V A button then press the gt button 3 Point at the OPTION in the left column of the menu using the V A button then press the gt button 4 Point at the LAMP TIME using the W button then press the button A dialog will appear 5 Press the gt button to select OK on the dialog It performs resetting the lamp time N ODO OO A NOTE Please reset the lamp time only when you have replaced the lamp for a suitable indication about the lamp 106 Replacing the lamp continued Lamp warning HIGH VOLTAGE A HIGH TEMPERATURE HIGH PRESSURE AWA
27. double click LiveViewerLiteForUSB_ MacOS app The application LiveViewer Lite for USB will close automatically when the USB cable is unplugged However it may remain displayed at times NOTE The image transmission from the computer is suspended while the password protected screen saver is running To resume the transmission exit the screen saver e If Waiting for connection remains displayed while the USB cable is connected remove the USB cable and reconnect after a while e Check our web site for the latest version of the software and its manual COUser s Manual concise Follow the instructions that can be obtained at the site for updating continued on next page 102 USB Display Mac computer continued NOTE The LiveViewer refer to the Network Guide and this application cannot be S used at the same time If you connect your computer os Soe E M to the projector by using a USB cable while the c LiveViewer is running the following message wil be displayed e Depending on the software installed on your computer images on your computer cannot be transferred using LiveViewer Lite for USB e If any application software having the firewall function is installed into your computer make the firwall function invalid with following the user s manual e Some security software may block image transmission Please change the security software setting to allow the use of LiveVie
28. have DHCP DHCP enabled To save the setting press the button Dynamic Host When the DHCP setting changes to ON it Configuration Protocol takes a little time to obtain IP address from DHCP server e Auto IP function will be assigned an IP address if the projector could not obtain an IP address from server even if DHCP is ON Use the A W lt b buttons to enter the IP ADDRESS This function can only be used when DHCP is set to OFF IP ADDRESS The IP ADDRESS is the number that identifies this projector on the network You cannot have two devices with the same IP ADDRESS on the same network e The IP ADDRESS 0 0 0 0 is prohibited Use the A W lt P buttons to enter the same SUBNET MASK used by your computer This function can only be used when DHCP is set to OFF e The SUBNET MASK 0 0 0 0 is prohibited Use the A W lt gt buttons to enter the DEFAULT GATEWAY a node on a computer network that DEFAULT serves as an access point to another network GATEWAY address This function can only be used when DHCP is set to OFF Use the A W lt P buttons to input the DNS server address The DNS server is a system to control domain names and IP addresses on the Network Use the A V buttons to enter the TIME DIFFERENCE Set the same TIME DIFFERENCE as the one set on your computer If unsure consult your IT WIRELESS SUBNET SETUP MASK continued DNS SERVER TIM
29. left end on the test pattern use the equalizing adjustment bar 1 The darkest tone at the left end of the test pattern cannot be controlled with any of equalizing adjustment bar e Lines or other noise might appear on the screen when this function is operated but it is not a malfunction COMPUTER IN 1 1024 x 768 60Hz continued on next page item scription O Using the A V buttons switches the color temperature mode To adjust CUSTOM selecting a mode whose name includes CUSTOM and then pressing the gt button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode Sa Melee OFFSET adjustments change the color intensity on the whole tones of the test pattern GAIN adjustments mainly affect color intensity on the brighter tones COLOR TEMP Of the test pattern Choose an item using the lt P gt buttons and adjust the level using the A V buttons amp COLOR TEMP_CUSTOM 1 You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button Each time you press the ENTER button the pattern changes as below No pattern gt Gray scale of 9 steps t Ramp Gray scale of 15 steps e Lines or other noise might appear on the screen when this function is operated but it is not a Alia malfunction Using the lt gt buttons adjusts the strength of whole color Weak Strong e This item can be selected on
30. menu When you connect your computer to the USB TYPE B port on the projector using a USB cable the projector will be recognized as a CD ROM drive on your computer Then the software in the projector LiveViewerLiteForUSB exe will run automatically and the application LiveViewer Lite for USB will be ready on your computer for the USB Display The application LiveViewer Lite for USB will close automatically when the USB cable is unplugged However it may remain displayed at times NOTE If the software does not start automatically this is typically because CD ROM autorun is disabled on your OS follow the instructions below 1 Click on the Start button on the toolbar and select the Run 2 Enter F LiveViewerLiteForUSB exe and then press the OK If your CD ROM drive is not drive F on your computer you will need to replace F with the correct drive letter assigned to your CD ROM drive e CD ROM autorun is disabled while the screen saver is running e The image transmission from the computer is suspended while the password protected screen saver is running To resume the transmission exit the screen saver e If Waiting for connection remains displayed while the USB cable is connected remove the USB cable and reconnect after a while e Check our web site for the latest version of the software and its manual QUser s Manual concise Follow the instructions that can be obtained at the site fo
31. port along with the icon You can select the number either from blank no number assigned 1 2 3 or 4 Then press the ENTER or INPUT button 5 If you would like to modify the name assigned to the port select CUSTOM NAME and press the ENTER or INPUT button continued on next page 55 a a item Description e ee eee eee ee ee ee E SOURCE NAME _ COMPUTER IN 1 k PC 6 The current name will be displayed on the first line Use the A W lt gt buttons and the ENTER or INPUT button to select and enter characters To erase 1 character at one time press the RESET button or press the lt and INPUT button at the same time Also if you move the cursor to DELETE or ALL CLEAR on screen and press the ENTER or INPUT button 1 character or all characters will be erased The name can be a maximum SOURCE NAME of 16 characters Continued 7 To change an already inserted character press the A button to move the cursor to the first line and use the lt gt buttons to move the cursor on the character to be changed After pressing the ENTER or INPUT button the character is selected Then follow the same procedure as described at the item 6 above 8 To finish entering text move the cursor to the OK on screen and press the gt ENTER or INPUT button To revert to the previous name without saving changes move the cursor to the CANCEL on screen and press the lt ENTER or INPUT button Using the A V cursor buttons sw
32. selected will reset the V POSITION to the default setting e When this function is performed on a video signal or an s video signal the range of this adjustment depends on OVER SCAN 37 setting It is not possible to adjust when OVER SCAN is set to 10 e This function is unavailable for a signal from the LAN USB TYPE A USB TYPE B or HDMI port Using the lt gt buttons adjusts the horizontal position Right Left e Over adjusting the horizontal position may cause noise to appear on the screen If this occurs please reset the horizontal position to the default setting Pressing the RESET button when the H POSITION is H POSITION selected will reset the H POSITION to the default setting e When this function is performed on a video signal or an s video signal the range of this adjustment depends on OVER SCAN 37 setting It is not possible to adjust when OVER SCAN is set to 10 e This function is unavailable for a signal from the LAN USB TYPE A USB TYPE B or HDMI port continued on next page 38 Using the lt gt buttons adjusts the horizontal phase to eliminate flicker Right Left e This item can be selected only for a computer signal or a component video signal This function is unavailable for a signal from the LAN USB TYPE A USB TYPE B or HDMI port Using the lt gt buttons adjusts the horizontal size Small Large e This item can be selected only for a computer signal This function is una
33. sunlight or near hot objects such as heaters Do not place the projector where the air from an air conditioner or similar unit will blow on it directly e Do not place anything near the projector lens or vents or on top of the projector e Do not place anything that may be sucked into or stick to the vents on the bottom of the projector This projector has some intake vents also on the bottom gt Do not place the projector anyplace where it may get wet Getting the projector wet or inserting liquid into the projector could cause fire electric shock and or malfunction of the projector e Do not place the projector in a bathroom or the outdoors e Do not place anything containing liquid near the projector e Do not place the projector where any oils such as cooking or machine oil are used gt Use only the mounting accessories the manufacturer specified and leave installing and removing the projector with the mounting accessories to the service personnel e Read and keep the user s manual of the mounting accessories used A CAUTION P gt Avoid placing the projector in smoky humid or dusty place Placing the projector in such places could cause fire electric shock and or malfunction of the projector e Do not place the projector near humidifiers smoking spaces or a kitchen Also do not use an ultrasonic humidifier near the projector Otherwise chlorine and minerals contained in tap water are atomized and could be deposited in the pro
34. the box 3 3 Contact your dealer with the 10 digit inquiring code Your password will be sent after your user registration information is confirmed continued on next page 86 item i eseription 1 Use the A V buttons on the SECURITY menu to select the MY TEXT DISPLAY and press the gt or ENTER button to display the MY TEXT DISPLAY on off menu 4 RETURN gt EXIT 2 Use the A V buttons on the MY TEXT DISPLAY on off menu to select on or off DISPLAY When it is set ON the MY TEXT will be displayed on the START UP screen and the INPUT _ INFORMATION when the INFORMATION on the RET RECKON SERVICE menu Is chosen COMPUTER IN 1 e This function is available only when the MY TEXT FRAME LOCK PASSWORD function is set to the OFF Boo lecis tas MY TEXT DISPLAY ON RETURN E EXIT 1 Use the A V buttons on the SECURITY menu to select the MY psia TEXT WRITING and press the gt button The MY TEXT WRITING dialog will be displayed 2 The current MY TEXT will be displayed on the first 3 lines If not yet written the lines will be blank Use the A gt buttons and the ENTER or INPUT button to select and rojector enter characters To erase 1 character eee at one time press the RESET button or ABC DEFCHIAREMNOMORSTUVENY aibicidje figihiilj iki liminioipiqiris UlViwixiyiz press the lt and INPUT button at the ereb ee CANCEL DELETE same time Also if you move the cursor Ee to DELETE or ALL CLEAR on s
35. the images by using the menu on the Thumbnail screen wW Moves to an upper folder Allows you to sort Allows you to sort files and folders as following and folders as Allows you to sort files and folders as following RETURN sareen gt cursor button or ENTER to return to the Thumbnail a Goto previous nextpage Configures and starts the Configures and starts the Slideshow A95 0 Configures and starts the Slideshow A95 0 RETURN a gt cursor button or ENTER to return to the Thumbnail PLAY Press the cursor button or ENTER to start the Slideshow START Sets the beginning number of the Slideshow STOP Sets the end number of the Slideshow INTERVAL Sets the interval time for displaying still images during the Slideshow PLAY MODE Selects the Slideshow mode INPUT Switches the input port MENU Displays the menu Be sure to use this function before removing USB storage device from the projector After that the projector will not recognize a REMOVE USB USB storage device until you insert it again into the USB TYPE A input port Turns the sound on off for files that contain audio data 91 PC LESS Presentation continued NOTE These operations are not accessible while the projector OSD is displayed e The Thumbnail mode is able to display up to 20 files in one page e It is not possible to change the input port by using the INPUT button when the Thumbnail screen Slideshow or Fu
36. the registered screen and the following message is displayed for several seconds MyScreen registration is finished If the registration failed the following message is displayed A capturing error has occurred Please try again e This function cannot be selected when the ON is selected to the MyScreen Lock item 54 e This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu M83 e This function is unavailable for a signal from the LAN USB TYPE A USB TYPE B or HDMI port vd C ENTER LEYES continued on next page 53 Using the A V buttons turns on off the MyScreen lock function ON amp OFF MyScreen Lock When the ON is selected the item MyScreen is locked Use this function for protecting the current MyScreen e This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu 83 Using the A V buttons turns on off the message function ON amp OFF When the ON is selected the following message function works AUTO IN PROGRESS while automatically adjusting NO INPUT IS DETECTED SYNC IS OUT OF RANGE INVALID SCAN FREQ NOT AVAILABLE Searching while searching for the input Detecting while an input signal is detected AUTO ECO MODE while starting up with AUTO ECO MODE The indication of the input signal displayed by changing The indication of the aspect ratio displayed b
37. the remote R RSesiE amp TIME DIFFERENCE control to perform the item A DATE AND TIME 4 RETURN Use the A V buttons to turn DHCP on off ON amp OFF select OFF when the network does not have DHCP DHCP enabled To save the setting press the gt Dynamic Host Dutton Configuration When the DHCP setting changes to ON it Protocol takes a little time to obtain IP address from DHCP server e Auto IP function will be assigned an IP address if the projector could not obtain an IP address from server even if DHCP is ON Use the A W lt b buttons to enter the IP ADDRESS This function can only be used when DHCP is set WIRED SETUP to OFF IP ADDRESS The IP ADDRESS is the number that identifies this projector on the network You cannot have two devices with the same IP ADDRESS on the same network e The IP ADDRESS 0 0 0 0 is prohibited Use the A W lt P buttons to enter the same SUBNET MASK used by your computer SUBNET This function can only be used when DHCP is set MASK to OFF e The SUBNET MASK 0 0 0 0 is prohibited Use the A W lt P buttons to enter the DEFAULT GATEWAY a node on a computer network that DEFAULT serves as an access point to another network GATEWAY address This function can only be used when DHCP is set to OFF Use the A gt buttons to input the DNS server address DNS SERNER The DNS server is a system to control domain names and I
38. the standby mode 2 Select an audio input port or the mute STANDBY icon using the lt gt buttons The icons indicate the following AUDIO SOURCE No 1 AUDIO IN1 port No 2 AUDIO IN2 port No 3 AUDIO IN3 port No 4 LAN port No 5 USB TYPE A port No 6 USB TYPE B port No 7 HDMI port X mutes the sound e Audio input from port nos 4 to 7 can only be selected by each of the picture input ports e Even if the projector is in the standby mode cooling fans may work and make noises when the built in speaker is in operation e C C Closed Caption is automatically activated when X is selected and an input signal containing C C is received This function is available only when the signal is NTSC for VIDEO or S VIDEO or 480i 60 for COMPUTER IN1 or COMPUTER IN2 and when AUTO is selected for DISPLAY in the C C menu under the SCREEN menu 0157 olooooo0o00o0 Mies LOLOKo LOKO LOKORO ojoooo0000 continued on next page 50 item i escription O O O O Using the A V buttons switches the input level to match that of the microphone connected to the MIC port MIC LEVEL HIGH amp LOW HIGH for a microphone with an amplifier LOW for a microphone without an amplifier Using the lt gt buttons adjusts the volume of the microphone MIC VOLUME connected to the MIC port Low High 51 SANASIN MONU From the SCREEN menu items shown in the table below can be performed Select an item using the A V cursor buttons
39. 6 7 8 9 1 22 D ZOOM button 2125 23 D ZOOM button 125 24 POSITION button 227 31 25 MENU button 30 31 26 A W lt gt cursor buttons R30 27 ENTER button L430 31 28 ESC button 030 i Back of 29 RESET button 30 the remote contro 30 Battery cover 17 SAN UO Install the projector according to the environment and manner the projector will be used in Arrangement Refer to table T 1 or T 2 and figures F 1 and F 2 at the end of User s Manual concise to determine the screen size and projection distance The values shown in the table are calculated for a full size screen a Screen size diagonal 1 2 Projection distance 8 1 ED Screen height 8 e For the case of installation in special conditions such as on the wall or ceiling the specified mounting accessories and service may be required Tabletop use must be setup with the designated optional accessories Before installing the projector consult your dealer about your installation e The screen position may shift after installation if the projector is mounted on locations such as the wall or ceiling due to the flexibility of the plastic projector body If readjustment is necessary consult with your dealer or service personnel e The projected image position and or focus may change during warm up approx 30 minutes after the lamp is turned on or when the ambient conditions change
40. ACTORY RESET 2170 is executed If you wish to change the settings refer to the LANGUAGE 2152 and ALTITUDE 463 menu 1 LANGUAGE Use the A W lt gt amp INITIAL SETTING buttons to select the desired language SSi and press the ENTER button of the OFRANCAIS OPYCCKH OEESTI remote control or the INPUT button of Reta OPOLSKI Sth ar the projector to execute ONORSK ODANSK Ou ONEDERLANDS OCESKY OPORTUGUES BRA OPORTUGU S OMAGYAR OINDONESIAN Ons OROMANA OVIET Oia teh OSLOVENSKI OZRpx OHRVATSKI oa OEAAHNIKA RESET _ EXIT ENTER _ NEXT 2 ALTITUDE Use the A V buttons to 4 INITIAL SETTING select NORMAL for altitude below ALLUDE 1600 m 5250 feet otherwise select ee ee HIGH and press the ENTER button of PESTE E truco kare the remote control or the INPUT button a cathe to HIGH 1 600m 5250 feet or higher of the projector to execute set it to NORMAL below 1 600m 5250feet OHIGH 1 600m 5250feet or higher RESET __ ENTER _ END continued on next page 19 20 Turning off the power 4 Press the STANDBY ON button on the projector or the remote control The message Power off will appear on the screen for about 5 seconds 2 Confirm that there is nothing that the lens door hits while closing Press the STANDBY ON button again while the message appears The projector lamp will go off and the POWER indicator will begin blinking in ora
41. AMIC PICTURE MODE BOARD BLACK BOARD GREEN WHITEBOARD DAYTIME PHOTO e When the combination of GAMMA and COLOR TEMP differs from pre assigned modes above the display on the menu for the PICTURE MODE is CUSTOM Please refer to the GAMMA and COLOR TEMP 0134 35 items in PICTURE menu e Lines or other noise might appear on the screen when this function is operated but it is not a malfunction Using the lt gt buttons changes the eco mode setting ECO MODE See the ECO MODE item in SETUP menu B47 e When the ambient temperature is around 35 to 40 C the brightness of lamp is reduced automatically Pressing the button displays the INSTALLATION dialog INSTALLATION soe the INSTALLATION item in SETUP menu 0248 Performing this item resets all of the EASY MENU items except the RESET FILTER TIME and LANGUAGE A dialog is displayed for confirmation Selecting the OK using the gt button performs reseiting The usage time of the air filter is shown in the menu Performing this item resets the filter time which counts usage time of the air filter PE EE 21M A dialog is displayed for confirmation Selecting the OK using the gt button performs resetting See the FILTER TIME item in OPTION menu E60 Using the lt gt buttons changes the display language LANGUAGE See the LANGUAGE item in SCREEN menu 052 Press the gt or ENTER button to use the menu of PICTURE ADVANCED MENU IMAGE INPUT SETUP AUDIO
42. E manager DIFFERENCE Use the gt button to return to the menu after setting the TIME DIFFERENCE e When this item is set the same item in the WIRED SETUP menu is overwritten with the same setting 477 continued on next page 72 item scription O O O O O Use the A gt buttons to enter the Year last two digits Month Date Hour and Minute e When this item is set the same item in the WIRED SETUP menu is overwritten with the same setting 77 DATE AND The projector will override this setting and retrieve TIME DATE AND TIME information from the Time server when SNTP is enabled Date Time Settings in the Network Guide e This setting will be reset if the projector is turned off while STANDBY MODE in the SETUP menu is set to SAVING 1148 or when the AC power is turned off Use the A V buttons to select the channel of the wireless LAN to be used while MODE 77 is set to ADHOC Select according to the settings of your computer The channels 1 to 11 are available To save the setting press the gt button WIRELESS CH e The available channels would be various SETUP depending on a country In addition wireless network card might be required due to the standard e This item can only be selected when MODE is set to ADHOC When MODE is set to INFRASTRUCTURE the channel is automatically selected continued Use the A V buttons to select the encryption method to be used WPA2 PSK A
43. EASY MENU SELECT w D ZOOM 256 100 0 KEYSTONE 0 2 In the EASY MENU 1 Use the A V cursor buttons to select an item to e ESTE o operate If you want to change it to the ADVANCED PICTUREWODE ORAL MENU select the ADVANCED MENU m RESET 2 Use the lt cursor buttons to operate the item EXECUTE FILTER TIME Oh amp LANGUAGE ENGLISH In the ADVANCED MENU 1 Use the A V cursor buttons to select a menu If you want to change it to the EASY MENU select the EASY MENU The items in the menu appear on the right side 2 Press the cursor button or ENTER button to move the cursor to the right side Then use the A V cursor buttons to select an item to operate and press the cursor button or ENTER button to progress The operation menu or dialog of the selected item will appear continued on next page 30 ADVANCED MENU X EXIT 012345678901 w ADVANCED MENU y IMAGE Y SECURITY EASY MENU EXIT BRIGHTNESS CONTRAST GAMMA COLOR TEMP COLOR sa TINT SHARPNESS ACTIVE IRIS gt MY MEMORY COMPUTER IN 1 3 Use the buttons as instructed in the OSD to operate the item COMPUTER IN 1 1024 x 768 60Hz SELECT 0 0 DEFAULT 1 MID 0 0 4 PRESENTATION 1024 x 768 60Hz Using the menu function continued 3 To close the MENU press the MENU button again or select EXIT and press the lt cursor button or ENTER button Even if you
44. ECTOR 2 1 Follow the procedure in 1 1 to display the TRANSITION DETECTOR on off menu 2 2 Select OFF to display the ENTER 3 TRANSITION DETECTOR T PASSWORD box large Enter the registered EEIE password and the screen will return to the Inquiring Code 01 2345 6789 TRANSITION DETECTOR on off menu oo00 0K gt If an incorrect password is input the menu will ERTES is le box close If necessary repeat the process from 2 1 3 If you have forgotten your password 3 1 Follow the procedure in 1 1 to display the TRANSITION DETECTOR on off menu 3 2 Select OFF to display the ENTER PASSWORD box large The 10 digit Inquiring Code will be displayed inside the box 3 3 Contact your dealer with the 10 digit Inquiring Code Your password will be sent after your user registration information is confirmed continued on next page 85 item i eseription O The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten When the password is set for the MY TEXT e The MY TEXT DISPLAY menu will be unavailable which can prohibit changing the DISPLAY setting e The MY TEXT WRITING menu will be unavailable which can prevent the MY TEXT from being overwritten 1 Turning on the MY TEXT PASSWORD 1 1 Use the A buttons on the SECURITY menu tO gegypess pene select the MY TEXT PASSWORD and press the a gt button to display the MY TEXT PASSWORD on off menu 1 2 Use the A V buttons on the MY TEXT PASSWORD on off menu to se
45. ER PERFECT FIT continued e When the ECO is selected acoustic noise and screen brightness are reduced e When INTELLIGENT ECO is selected the brightness of the lamp changes according to the level of the input signal The lamp becomes brighter when the input signal level is high and darker when the level is low If dark images are projected continuously the brightness of the lamp may increase to maintain its performance ECO MODE e When SAVER is selected you can select the time within 1 to 30 min for SAVER MODE using the button If the image signal level doesnt change more than the period set the lamp brightness is reduced and electric power consumption decreased If the image signal level changes or any buttons are operated the lamp will brighten again If dark images are projected continuously the brightness of the lamp may increase to maintain its performance e When AUTO ECO MODE above is set to ON the projector will always be set to Eco mode at start up regardless this setting e When the ambient temperature is around 35 to 40 C the brightness of lamp is reduced automatically continued on next page 47 item scription Pressing the gt button displays the dialog for changing the INSTALLATION setting INSTALLATION REAR DESKTOP REAR CEILING INSTALLATION FRONT CEILING RETURN gt EXIT Use the A V buttons to select the desired setting on the INSTALLATION dialog If TRANSITION
46. ES lt gt WPA2 PSK TKIP f f OFF WPA PSK AES tt tt WEP 64bit WEP 128bit WPA PSK TKIP To save the setting press the gt button e When MODE 471 is set to ADHOC either WPA PSK and WPA2 PSK cannot be selected If IEEE802 11 n is used while MODE is set to INFRASTRUCTURE TKIP and WEP are disabled e lf OFF or AES is not selected communication will switch automatically to IEEE802 11 b g ENCRYPTION continued on next page 13 item scription O O O O O Use the A V i WIRELESS _ SSID 1 b uttons to se ect th e Bassin WLANProjector 1 3 DEFAULT WLANProjector2 SSID to display the 4 DEFAULT WLANProjector3 5 CUSTOM 1234567890 1234567890123456789012 SSID menu 4 CANCEL 0K 1 DEFAULT lt 2 DEFAULT 3 DEFAULT t 5 CUSTOM 4 DEFAULT Select one of the DEFAULT 1 4 and press gt or ENTER button To adjust CUSTOM Press the gt or ENTER button when the 5 CUSTOM is selected The SSID 5 CUSTOM menu will be appeared 1 The current SSID will be displayed on the first line If not yet written the line will be blank Use the A gt buttons and the ENTER or INPUT button to select and enter characters To erase 1 character at one time press the RESET button or press the lt and INPUT button at the same time Also if you move the cursor to DELETE or ALL CLEAR on screen and press the ENTER or INPUT button 1 character or all characters will be erased WIRELESS The
47. EXT is displayed together with the input information in the INPUT _ INFORMATION box 87 FACTORY RESET selecting OK using the button performs this function By this function all the items in all of menus will collectively return to the initial setting Note that the items LAMP TIME FILTER TIME LANGUAGE FILTER MESSAGE NETWORK and SECURITY settings are not reset CANCEL gt OK Be sure to set ALTITUDE after resetting all the settings L63 70 NETWORK Menu Remember that incorrect network settings on this S AANDE e Os SELECT projector may cause trouble on the network Be sure MAGE fe MRELESS INFORMATION to consult with your network administrator before SETUP e MIRED INFORMATION connecting to an existing access point on your network iis Select NETWORK from the main menu to access the Kerra a following functions a EASY MENU Select an item using the A V cursor buttons on the sale SNe ere projector or remote control and press the cursor button on the projector or remote control or ENTER button on the remote control to execute the item Then perform it according to the following table See the Network Guide for details of NETWORK operation NOTE To use the wireless network function of this projector the designated USB wireless adapter that is sold as an option is required Do not use any extension cable or device when connecting the adapter to the projector e The projector does not allow both wireles
48. ING LOCK is turned ON With this condition the three indicators POWER orange TEMP LAMP will blink at approximately three seconds intervals If the STANDBY MODE is set to SAVING If there is no USB memory inserted into USB TYPE A port If PIN LOCK or lock of TRANSITION DETECTOR is not being released If a system error occurs e Please operate one of the following after loading Press INPUT button and lt button of the control panel at the same time Wait at least five min after loading Restart the projector after re plugging the AC cable SERVICE CLONING continued continued continued on next page 68 ltem escription O Load MyScreen data e Please save the image data as pj_logo bmp or pj_logo gif into USB memory e Please note that the only compatible formats are as follows File format Windows BMP bit pixel 2 4 8 15 16 24 32bit Compression format Without compression RLE GIF Image size more than 36x36 less than 1280x800 e If two kinds of file format are saved pj logo bmp will be registered into MyScreen data e If MyScreen LOCK or MyScreen PASSWORD is turned ON the data of MyScreen cannot be loaded SERVICE CLONING continued continued setting the data e Operating the SAVE function under CLONING will name the file as pj data bin into the USB memory Please do not attempt to change the file name or the folder structure e If a file with the sam
49. In that case use the LENS DOOR OPEN function below to open the lens door completely LENS DOOR OPEN Use the LENS DOOR OPEN function to open the lens door if not open completely for some reason such as cleaning LENS DOOR CLOSE Use the LENS DOOR CLOSE function to temporarily close the lens door when LENS DOOR LOCK is set to ON Note that the lamp will be turned off when the lens door is closed Press the STANDBY ON button on the projector or the remote control to open the lens door and start the projector again continued on next page 64 o ltem Description O O O y O REMOTE FREQ 1 Use the A V button to change the projector s remote sensor frequency setting L17 18 1 NORMAL 2 HIGH 2 Use the lt gt button to change the projector s remote sensor on or off ON OFF The factory default setting is for both 1 NORMAL and 2 HIGH to be on If the remote control does not function correctly disable either of them It s not possible to disable both options at the same time SERVICE_REMOTE FREQ ON 1 NORMAL O 2 HIGH O Selecting this item displays COMMUNICATION menu In this menu you can configure the serial communication settings of the projector using the SERVICE CONTROL port continued Z OPTION_ SERVICE _ COMMUNICATION SERIAL SETTINGS TRANSMISSION METHOD HALF DUPLEX RESPONSE LIMIT TIME Ona COMMUNICATION Select an item using the cursor buttons A V Then pressing the button o
50. Is there blockage of the air passage aperture e Is the air filter dirty e Does the peripheral temperature exceed 40 C e Is the projector used at an altitude of about 1600 m or higher If the projector is used at an altitude of about 1600 m or higher set ALTITUDE of the SERVICE item in the OPTION menu to HIGH 463 The lens door is not opened properly One of the followings has been happened Lighting Tred Taimed edie m is not opened properly when the projector ae or on e The lens door position is shifted while the projector is working Restart the projector after confirming that there is nothing that the lens door hits while opening or closing It is time to clean the air filter Please immediately turn the power off and clean or Lighting Simultaneous change the air filter referring to the section Cleaning In Green blinking in Red and replacing the air filter After cleaning or changing the air filter please be sure to reset the filter time After the remedy reset the power to ON Blinking ie Turned Lighting off In Red or Lighting In Red There is a possibility that the interior portion has become overcooled Please use the unit within the usage temperature parameters 0 C to 40 C After the treatment reset the power to ON Lighting Alternative In Green blinking in Red At least 1 Power ON schedule is saved to the Blinking In Green for Turned Turned projector approx 3 o
51. LANK functions continued on next page 117 Phenomena that may be easy to be mistaken for machine defects continued Cases not involving a machine defect The signal cables are not correctly connected 9 14 Correctly connect the audio cables The MUTE function is working Restore the sound pressing MUTE or VOLUME button on the remote control The volume is adjusted to an extremely low level Adjust the volume to a higher level using the menu function or the remote control a nipi The AUDIO SOURCE SPEAKER setting is not correct Correctly set the AUDIO SOURCE SPEAKER in AUDIO menu The Sound button or checkbox is disabled If you have selected USB TYPE A turn the sound on from the Thumbnail menu lf you have selected USB TYPE B remove the check mark from the Sound checkbox in the Options window of LiveViewer Lite for USB If you have selected LAN remove the check mark from the Sound checkbox in the Option menu of LiveViewer continued on next page 118 Phenomena that may be easy to be mistaken for machine defects continued Cases not involving a machine defect The signal cables are not correctly connected 9 14 Correctly connect the connection cables The brightness is adjusted to an extremely low level 34 Adjust BRIGHTNESS to a higher level using the menu function The computer cannot detect the projector as a plug and play monitor Make sure that the computer can detect
52. Manual concise which is a book Your projector should come with the items shown there Require of your dealer immediately if any items are missing NOTE Keep the original packing materials for future reshipment Be sure to use the original packing materials when moving the projector Use special caution for the lens Part names Projector 1 Lamp cover 21106 The lamp unit is inside 2 Control panel 45 3 Elevator feet x 2 L425 4 Remote sensor 17 5 Lens 110 6 Intake vents 7 Filter cover 1108 The air filter and intake vent il INCI ALE i WN a re nN S d e r f I Hy H f i y 8 Speaker L12 22 50 9 Exhaust vent 10 AC IN AC inlet 215 11 Ports G05 12 Security bar L415 13 Security slot L15 14 Lens door 41110 15 Mirror L110 16 Spacer Small 2125 17 Spacer Large 25 Part names continued Control panel 1 STANDBY ON button 24119 3 4 J ve 2 INPUT button 122 3 POWER indicator 2119 114 INPUT bl 4 TEMP indicator 1114 OnO jo ku A FQ 5 LAMP indicator 4114 ped Buttons lt P A V 6 FOCUS buttons 5 1 when no menu is displayed 44126 or Cursor lt gt buttons when a menu is displayed 4130 FOCUS function is invalid when the USB TYPE A port is selected as the input source 7 MENU buttons when no menu is display
53. N USB TYPE A or USB TYPE B port is selected the projector will check HDMI port first Press the MY SOURCE DOC CAMERA button on MY SOURCE the remote control The input signal will be changed DOC CAMERA button into the signal you set as MY SOURCE E162 input port that connected the document camera 23 Searching an input signal 4 Press SEARCH button on the remote control SEARCH button The projector will start to check its input ports as below in order to find any input signals When an input is found the projector will stop searching and display the image If no signal is found the projector will return to the state selected before the operation gt COMPUTER IN1 gt COMPUTER IN2 y VIDEO LAN f Vv S VIDEO USB TYPE A HDMI lt USBTYPEB lt e While ON is selected for AUTO SEARCH item in OPTION menu 58 the projector will keep checking the ports in above order repeatedly till an input signal is detected e t may take several seconds to project the images from the USB TYPE B port Selecting an aspect ratio 4 Press ASPECT button on the remote control ASPECT button Each time you press the button the projector switches the mode for aspect ratio in turn O For a computer signal NORMAL gt 4 3 gt 16 9 gt 16 10 gt NATIVE rs O For an HDMI signal NORMAL gt 4 3 gt 16 9 gt 16 10 gt 14 9 gt NATIVE ee o oo O For a vid
54. OCK TRANSITION DETECTOR My TEXT PASSWORD My TEXT DISPLAY My TEXT WRITING CLONING LOCK Presentation tools 88 PC LESS Presentation 88 USB Display Windows computer 98 USB Display Mac computer 102 Maintenance 220005 106 Replacing the lamp 106 Cleaning and replacing the air filter 108 Caring for the mirror and lens 110 Other care 005 111 Troubleshooting 0080 112 Related messages 112 Regarding the indicator lamps 114 Resetting all settings 117 Phenomena that may be easy to be mistaken for machine defects 117 Specifications 080085 123 IO AON Features The projector provides you with the broad use by the following features v v V The unique lens and mirror system realizes ultra short distance projection which gives you more various way of use The motorized lens door offers you very simple use of the projector The double layer filter system is expected to function longer and offers you less maintenance frequency The HDMI port can support various image equipment which have digital interface to get clearer pictures on a screen This projector can be controlled and monitored via LAN connection Furthermore you can use the designated USB wireless adapter optional to establish wireless LAN connection Checking the contents of package Please see the Contents of package section in the User s
55. OWER OFF t AUTO POWER OFF ENABLE DISABLE 4 RETURN AS LEXIT 1 FRETURN Le EXIT AUTO POWER When the time is set to 0 the projector is not turned off automatically OFF When the time is set to 1 to 99 and when the passed time with no signal or an unsuitable signal reaches at the set time the projector lamp will be turned off If one of the projector s buttons or the remote control buttons is pressed or one of the commands except get commands is transmitted to the CONTROL port during the corresponding time projector will not be turned off Please refer to the section Turning off the power L21 Using the A V buttons selects the function of USB TYPE B port To use this function you need to connect the USB TYPE B port of the projector and the type A USB port of a computer MOUSE USB DISPLAY MOUSE The accessory remote control works as the simple mouse and keyboard of the computer USB DISPLAY The port works as an input port that receives image USB TYPE B signals from the computer E198 102 e It may take several seconds to project the images from the USB TYPE B port e In the following cases a message to notify you that USB TYPE B port is not available for picture input appears This setting is switched to MOUSE while a picture input from the USB TYPE B port is projected The USB TYPE B port is selected as the picture input source while this setting is set to MOUSE continued on next page
56. P addresses on the Network continued on next page item Descripion Use the A V buttons to enter the TIME DIFFERENCE Set the same TIME DIFFERENCE as the one set on your computer If unsure consult your IT TIME manager DIFFERENCE Use the button to return to the menu after setting the TIME DIFFERENCE e When this item is set the same item in the WIRELESS SETUP menu is overwritten with the same setting 72 Use the A W lt P buttons to enter the Year last two digits Month Date Hour and Minute e When this item is set the same item in the WIRELESS SETUP menu is overwritten with the same setting 73 DATE AND The projector will override this setting and retrieve TIME DATE AND TIME information from the Time server when SNTP is enabled Date Time Settings in the Network Guide e This setting will be reset if the projector is turned WIRED SETUP continued off while STANDBY MODE in the SETUP menu is set to SAVING 2148 or when the AC power is turned off Selecting this item displays the WIRED INFORMATION dialog for viewing the wired LAN settings a WIRED INFORMATION PASSCODE 0000 0000 0000 Projactor_Name 192 168 1 254 255 255 255 0 0 0 0 0 0 0 0 O FF FF FF FF FF FF TIME DIFFERENCE GMT 00 00 DATE AND TIME 2000 1 1 0 00 RETURN EXIT WIRED INFORMATION e For details of PASSCODE refer to the manual for LiveViewer e Only the first 16 characters of the P
57. Projector CP A222WN CP A302WN CP AW252WN Type nos CP A222WN CP A222WNM CP A302WN CP A302WNM CP AW252WN CP AW252WNM User s Manual detailed Operating Guide Thank you for purchasing this projector INOU inves MEMUEI Various symbols are used in this manual The meanings of these symbols are described below AWARNING This symbol indicates information that if ignored could possibly result in personal injury or even death due to incorrect handling ACAUTION This symbol indicates information that if ignored could possibly result in personal injury or physical damage due to incorrect handling NOTICE This entry notices of fear of causing trouble 1 Please refer to the pages written following this symbol NOTE The information in this manual is subject to change without notice e The illustrations in this manual are for illustrative purposes They may differ slightly from your projector e The manufacturer assumes no responsibility for any errors that may appear in this manual e The reproduction transfer or copy of all or any part of this document is not permitted without express written consent Trademark acknowledgment e Mac is a registered trademark of Apple Inc e Windows DirectDraw and Direct3D are registered trademarks of Microsoft Corporation in the U S and or other countries e VESA and DDC are trademarks of the Video Electronics Standard Association e HDMI the HDMI logo and High
58. RNING P The projector uses a high pressure mercury glass lamp The lamp can break with a loud bang or burn out if jolted or scratched handled while hot or worn over time Note that each lamp has a different lifetime and some may burst or burn out soon after you start using them In addition if the bulb bursts it is possible for shards of glass to fly into the lamp housing and for gas containing mercury and dust containing fine particles of glass to escape from the projector s vent holes gt About disposal of a lamp This product contains a mercury lamp do not put it in a trash Dispose of it in accordance with environmental laws e For lamp recycling go to www lamprecycle org in the US e For product disposal consult your local government agency or www eilae org in the US or www epsc ca in Canada For more information call your dealer e If the lamp should break it will make a loud bang when it does unplug the power cord from the outlet and make sure to request a replacement lamp from your local dealer Note that shards of glass could damage the projector s internals or cause injury during handling Z so please do not try to clean the projector or replace the lamp yourself e If the lamp should break it will make a loud bang when it does ventilate the Disconnect room well and make sure not to inhale the gas or fine particles that come out the plug from the projector s vent holes and not to get them into your eyes or mou
59. ROJECTOR NAME are dis played e IP ADDRESS SUBNET MASK and DEFAULT GATEWAY indicate 0 0 0 0 when DHCP is ON and the projector has not gotten address from DHCP server continued on next page Tf 1 Use the A V buttons on the NETWORK menu to select the PROJECTOR NAME and press the gt button The PROJECTOR NAME dialog will be displayed 2 The current PROJECTOR NAME will be displayed on the first 3 lines Particular projector name is pre assigned by default Use the A W lt gt buttons and the ENTER or INPUT button to select and enter characters To erase 1 character at one time press the RESET button or press the lt and INPUT button at the same time Also if you move the cursor to DELETE or ALL CLEAR on screen and push the ENTER or INPUT button 1 character or all characters will be erased The PROJECTOR NAME can be input up to 64 PROJECTOR characters Trop NAME 3 To change an already inserted character press the A V button to move the cursor to one of the first 3 lines and use the lt gt buttons to move the cursor on the character to be changed After pressing the ENTER or INPUT button the character is selected Then follow the same procedure as described at the item 2 above 4 To finish entering text move the cursor to the OK on screen and press the gt ENTER or INPUT button To revert to the previous PROJECTOR NAME without saving changes move the cursor to the CANCEL on screen and press th
60. Remote Control The following functions can be supported while the Thumbnail is displayed Button operation The remote Control panel Web Remote control Control avia ava ANYAM PAGE UP PAGE UP Switches pages PAGE DOWN PAGE DOWN e Displays the selected image on the Full Screen mode when a cursor is on a thumbnail image ENTER INPUT ENTER e Displays the SETUP menu below for the selected image when a cursor is on a thumbnail image number The SETUP menu for the selected image Use the lt cursor buttons to switch each setting or use the cursor SETUP button to execute the functions as follows RETURN Press the cursor button or ENTER to return to the Thumbnail screen Switch to ON to set the selected image as the first image in the START Slideshow This setting information will be saved in the playlist txt file 97 Switch to ON to set the selected image as the last image in the STOP Slideshow This setting information will be saved in the playlist txt file 97 SKIP Switch to ON to skip the selected image in the Slideshow This setting information will be saved in the playlist txt file 2197 Press the cursor or ENTER button to rotate the selected still image ROTATE 90 degrees clockwise This setting information will be saved in the playlist txt file 97 90 PC LESS Presentation continued Operating by the menu on the Thumbnail screen You can also control
61. SBTYPEB lt e While ON is selected for AUTO SEARCH item in OPTION menu 4158 the projector will keep checking the ports in above order repeatedly till an input signal is detected e t may take several seconds to project the images from the USB TYPE B port continued on next page 22 Selecting an input signal continued 1 e While ON is selected for AUTO SEARCH item in OPTION Press COMPUTER button on the remote control COMPUTER button Each time you press the button the projector switches its input port from the current port as below COMPUTER IN1 gt COMPUTER IN2 gt LAN USB TYPEB lt USBTYPEA menu the projector will keep checking every port sequentially till an input signal is detected 458 If COMPUTER button is pressed when VIDEO S VIDEO or HDMI port is selected the projector will check COMPUTER IN1 port first e t may take several seconds to project the images from the 1 e While ON is selected for AUTO SEARCH item in OPTION 1 e This function also can use for document camera Select the USB TYPE B port Press VIDEO button on the remote control VIDEO button Each time you press the button the projector switches its input port from the current port as below HDMI gt S VIDEO VIDEO A menu the projector will keep checking every port sequentially till an input signal is detected Q458 If VIDEO button is pressed when COMPUTER IN1 COMPUTER IN2 LA
62. SSID can be input up to 32 characters SETUP 2 To change an 1 VIRELESS_SSID_CUSTOM already inserted character press the A V button to JJAHAHALOAMAONHAC move the cursor C e as E to one of the first o ponte 2 lines and use EST N the lt gt buttons Tes to move the cursor on the character to gli iz aleisieirisialiim mister ICS TRs le ANE be changed After one aca pressing the ENTER eae a CANCEL S or INPUT button the character is selected Then crete follow the same albleldje figinlij k t minlolplalr s tlulvivixiy z procedure as ete a described at the a E item 1 above a 3 To finish entering text move the cursor to the OK on screen and press the gt ENTER or INPUT button To revert to the previous name without saving changes move the cursor to the CANCEL on screen and press the lt ENTER or INPUT button continued AIB CIDIE FIG H IT J K LIMIN O P QIR S TIU VW Yiz bic e f h i t continued on next page 14 ltem escription Selecting this item displays the WIRELESS _ INFORMATION dialog for viewing the wireless LAN settings Use the A V buttons to switch the page The first page shows the wireless LAN settings The second and subsequent pages display the signal information of wireless LAN connection devices 1o WIRELESS INFORMATION 1 e WIRELESS INFORMATION 2 PASSCODE 0000 0000 0000 PROJECTOR NAME rojector_Name SIGNAL STRENGTH ODE ADHOC SSID IEEE802 IP ADDRESS 192
63. TRANSITION DETECTOR 1 1 Use the A V buttons on the SECURITY menu m TRANSITION DETECTOR to select TRANSITION DETECTOR and press ON the gt or the ENTER button to display the RETURN TRANSITION DETECTOR on off menu 1 2 Use the A V buttons on the TRANSITION TRANSITION DETECTOR DETECTOR on off menu to select ON ENTER NEW PASSWORD Selecting ON will save the setting of the 0000 gt current angle and the INSTALLATION setting ENTER NEW PASSWORD The ENTER NEW PASSWORD box small box small will be displayed 1 3 Use the A W lt b buttons to enter a SRR NSIS MSU SS Nl NEW PASSWORD AGAIN oooo0f password Move the cursor to the right side of the ENTER NEW PASSWORD box small and press the button to display the NEW EERTE TRANSITION PASSWORD AGAIN box enter the same cnc password again ae PETEG TON 1 4 Move the cursor to the right side of the NEW PASSWORD AGAIN box and press the gt button to display the NOTE NEW PASSWORD box for about 30 seconds please make note of the password during this time Pressing the ENTER button on the remote control or the button on the projector will return to the TRANSITION DETECTOR on off menu e Please do not forget your TRANSITION DETECTOR password e This function will activate only when the projector is started after turning off the AC power e This feature may not function properly if the projector is not in a stable position when ON is selected 2 Turning off the TRANSITION DET
64. TWORK Y SECURITY H EASY MENU EAIT COMPUTER IN 1 1024 x 768 60Hz item i escription O O AUTO SEARCH DIRECT POWER ON Using the A V buttons turns on off the automatic signal search function ON OFF When the ON is selected detecting no signal automatically cycles through input ports in the following order The search is started from the current port Then when an input is found the projector will stop searching and display the image E COMPUTER IN1 gt COMPUTER IN2 gt LAN gt USB TYPE A F VIDEO S VIDEO HDMI USB TYPE B e It may take several seconds to project the images from the USB TYPE B port Using the A V buttons turns on off the DIRECT POWER ON function ON OFF When set to the ON the lamp in projector will be automatically turned on without the usual procedure L419 only when the projector is supplied with the power after the power was cut while the lamp was on e This function does not work as long as the power has been supplied to the projector while the lamp is off e After turning the lamp on by the DIRECT POWER ON function if neither input nor operation is detected for about 30 minutes the projector is turned off even though the AUTO POWER OFF function 059 is disabled continued on next page 08 Using the A V buttons adjusts the time to count down to automatically turn the projector off Long max 99 minutes Short min 0 minute DISABLE amp AUTO P
65. The ASPECT is set to 16 9 or 16 10 e The input signal has an aspect ratio of 16 9 16 10 or verticallly smaller than 16 10 while ASPECT is set to NORMAL e Horizontal size of the displayed image is full on the effective display area while the ASPECT is set to NATIVE e One of the following messages is displayed on the screen NO INPUT IS DETECTED SYNC IS OUT OF RANGE INVALID SCAN FREQ e The BLANK or TEMPLATE function is selected PICT POSIT H CP AW252WN Using the lt gt buttons corrects the vertical keystone distortion Shrink the bottom of the image Shrink the top of the image KEYSTONE The adjustable range of this function will vary among inputs For some input this function may not work well e This function will be unavailable when the TRANSITION DETECTOR is on 85 or the PERFECT FIT 62146 is adjusted Using the lt gt buttons corrects the horizontal keystone distortion Shrink the right of the image Shrink the left of the image e The adjustable range of this function will vary among inputs For some input this function may not work well e This function will be unavailable when the TRANSITION DETECTOR is on 4485 or the PERFECT FIT 62146 is adjusted KEYSTONE continued on next page 45 item i escription This item allows you to adjust the shape of the projected image in each of the corners and sides 1 Choose a corner or side to adjust using the A W lt b buttons and pr
66. The Floating menu is closed and the icon reappears in the Windows notification area Exit button The Floating menu Is closed NOTE If you click the Start capture button and or Stop button repeatedly images may not be displayed on the screen 104 USB Display Mac computer continued Options window If you select the Option button on the Floating menu the Options window is displayed Optimize Performance Optimize Performance Transmission speed The LiveViewer Lite for USB captures Een image Quality screenshots in JPEG data and sends them to E M Keep PC Resolution the projector The LiveViewer Lite for USB has M Sound two options that have different compression rate 0k cancel of JPEG data Transmission speed Speed takes priority over Image quality lt makes JPEG compression rate higher The screen on the projector is rewritten quicker because the transferred data is smaller but the image quality is worse Image quality Image quality takes priority over Speed lt makes JPEG compression rate lower The screen on the projector is rewritten slower because the transferred data is larger but the image quality is better Keep PC resolution If you remove the check mark from the Keep PC resolution box the screen resolution of your computer will be switched as follows and the display speed may be faster CP A222WN CP A3802WN 1024 x 768 XGA CP AW252WN 1280 x 800 WXGA lf
67. WORD box 0000 will be displayed for about 30 seconds please make note of the password during this time Pressing the ENTER button on the remote control or button on the projector will close the NOTE NEW PASSWORD box e Please do not forget your password continued on next page 82 item scription O O O The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten 1 Turning on the MyScreen PASSWORD 1 1 Use the A V buttons on the SECURITY menu to E MyScreen PASSWORD select MyScreen PASSWORD and press the gt ON button to display the MyScreen PASSWORD on Olan EXIT off menu 1 2 Use the A V buttons on the MyScreen FL MyScreen PASSWORD PASSWORD on off menu to select ON ENTER NEW PASSWORD The ENTER NEW PASSWORD box small 00 00 ae will be displayed ENTER NEW PASSWORD 1 3 Use the A W lt gt buttons to enter the box small password Move the cursor to the right side aean BASHVORD of the ENTER NEW PASSWORD box small eas and press the button to display the NEW 0000 PASSWORD AGAIN box enter the same PASSWORD again 1 4 Move the cursor to the right side of the NEW PASSWORD AGAIN box and press the gt button to display the NOTE NEW PASSWORD box for about 30 seconds please make note of the password during this time Pressing the ENTER button on the remote control or button on the MyScreen projector
68. ablets connected to the USB TYPE A ports For details refer to the manual for peripheral equipment USB Display 2198 102 PC LESS Presentation The PC LESS Presentation reads image and audio data from the storage media inserted into the USB TYPE A port and displays the image in the following modes The PC LESS Presentation can be started by selecting the USB TYPE A port as the input source This feature allows you to make your presentations without using your computer Thumbnail mode L489 Full Screen mode 4193 Slideshow mode 4195 Supported storage media e USB memory USB memory type USB hard disk and USB card reader type NOTE USB readers adapters that have more than one USB slot may not work if the adapter is acknowledged as multiple devices connected e USB devices with security software may not work e Be careful when inserting or removing a USB device L13 91 Supported format e FAT12 FAT16 and FAT32 NOTE NTFS is not supported 88 PC LESS Presentation continued Supported file format and its extension e JPEG jpeg jpg Progressive is not supported e Bitmap bmp 16bit mode and compressed bitmap is not supported e PNG png Interlace PNG is not supported e GIF gif e Movie avi mov Supported video format Motion JPEG Supported audio format WAV Linear PCM Stereo 16bit IMA ADPCM NOTE Files with a resolution larger than the following are n
69. adjusted to an extremely low level Adjust BRIGHTNESS and or CONTRAST settings to a higher level using the menu function D O The projector is operating in Eco mode Set ECO MODE to NORMAL and set AUTO ECO MODE to Pictures appear OFF in the SETUP menu dark ar The lamp is approaching the end of its product lifetime Replace the lamp In case the air filter is dirty and the ambient temperature is lower than 35 C the brightness of lamp might be reduced automatically Please clean or replace the air filter A N OO 106 107 O Oo Either the focus and or horizontal phase settings are not properly adjusted Adjust the focus using the FOCUS button and or H PHASE Pictures appear using the menu function blurry 26 39 The lens is dirty or misty Clean the lens referring to the section Caring for the mirror 110 and lens When the projector is operating in Eco mode flickering may appear on screen Set ECO MODE to NORMAL and set AUTO ECO MODE to Some kind OFF in the SETUP menu a degradation The OVER SCAN ratio is too big such as Adjust OVER SCAN in the IMAGE menu smaller flickering or Excessive VIDEO NR stripes appear Change the setting of VIDEO NR in the INPUT menu on screen The FRAME LOCK function cannot work on the current input signal Set FRAME LOCK in the INPUT menu to OFF continued on next page 120 N N N Phenomena that may be easy to be mistaken for machin
70. agnification ratio Small Large e The on screen menu might be displayed outside of the image display area depending on the adjustment value of the ASPECT D ZOOM VY KEYSTONE and K KEYSTONE Changing the values of ASPECT D ZOOM VY KEYSTONE and KJ KEYSTONE may fix the symptom Using the lt A cursor buttons adjusts the picture position e The D SHIFT adjustment values are not valid when the D ZOOM D SHIFT is set to 256 full screen CP A222WN CP A302WN e The D SHIFT adjustment values are not valid when the D ZOOM is set to 320 full screen CP AW252WN Using the A V cursor buttons selects the vertical picture position TOP MID BOTTOM The PICTURE POSITION is not changed if any of the following cases apply e The ASPECT is set to 4 3 e The input signal has an aspect ratio of 4 3 or vertically larger than 4 3 while the ASPECT is set to NORMAL e Vertical size of the displayed image is full on the effective display area while the ASPECT is set to NATIVE e One of the following messages is displayed on the screen NO INPUT IS DETECTED SYNC IS OUT OF RANGE INVALID SCAN FREQ e The BLANK or TEMPLATE function is selected PICTURE POSITION CP A222WN CP A302WN continued on next page 44 item i escription O O O O Using the A cursor buttons selects the horizontal picture position LEFT MID RIGHT The PICT POSIT H is not changed if any of the following cases apply e
71. ay be able to see the dialog and set an appropriate display resolution continued on next page 11 Connecting with your devices continued e If you insert a USB storage device such as a USB memory into the USB TYPE A port and select the port as the input source you can view images stored in the device 88 e You can connect a dynamic microphone to the MIC port with a 3 5 mm mini plug In that case the built in soeaker outputs the sound from the microphone even while the sound from the projector is output You can input line level signal to the MIC port from equipment such as wireless microphone Select HIGH in the MIC LEVEL item of the AUDIO menu when you input line level audio signal to the MIC port In the normal mode the volume of the microphone can be adjusted separately from the volume of the projector using the menu 51 In the standby mode the volume of the microphone is adjustable with the VOLUME buttons on the remote control in synchronization with the volume of the projector 22 Even when the sound of projector is set to mute mode by the AUDIO SOURCE function L150 the volume of the microphone is adjustable In both modes standby or normal the MUTE button on the remote control works on the sounds of the microphone and the projector R422 Speake with peakers a iS IG KK Microphone system Monitor COME JTER IN2 COMPUTER INi x NOTE f aloud feedback noise is produced from the speaker
72. becomes to be blocked by dust or other matter the internal temperature will rise which could cause malfunction or reduce the lifetime of the projector e Please be careful with the operating environment of the projector and the condition of the filter unit SERVICE continued on next page 63 item scription O O KEY LOCK 1 Use the A V buttons to select CONTROL PANEL or REMOTE CONTROL 2 Use the lt gt buttons to turn the key lock function on off When ON is selected all buttons on the projector or remote control except the STANDBY ON button are locked e Please use this function to prevent tampering or accidental operation e It is not possible to set both CONTROL PANEL and REMOTE CONTROL to ON LENS DOOR LOCK Use the A V cursor buttons to turn on off the LENS DOOR LOCK function Set LENS DOOR LOCK to ON to keep the lens door open even when power is turned off Follow cautions below when you set LENS DOOR LOCK to ON and keep the lens door open all the time e Do not apply excessive force on or allow impact to the lens door SERVICE as it incorporates a mirror continued e Keep the projector out of the reach of children e Never touch a lens door or mirror If the mirror is broken the projected image will be distorted Close the lens door and contact your dealer When the LENS DOOR LOCK is set to ON and the lens door is not open completely for some reason the image may shift or have keystone distortion
73. ccessory remote control works as a simple mouse and keyboard of the computer when the projector s USB TYPE B port and the computer s type A USB port are connected and MOUSE is selected for the USB TYPE B item in the OPTION menu 459 1 PAGE UP key Press PAGE UP button 2 PAGE DOWN key Press PAGE DOWN button 3 Mouse left button Press ENTER button 4 Move pointer Use the cursor buttons A V lt and gt USB TPE B 5 ESC key Press ESC button port 6 Mouse right button Press RESET button 3 E NOTE When the simple mouse amp keyboard function of this product does not work correctly please check the following e When a USB cable connects this projector with a computer having a built in pointing device e g track ball like a laptop PC open BIOS setup menu then select the external mouse and disable the built in pointing device because the built in pointing device may have priority to this function e Windows XP SP3 or higher is required for this function And also this function may not work depending on the computer s configurations and mouse drivers This function can work with the computer which can operate general USB mouse or keyboard e You cannot do things like press two buttons at once for instance pressing two buttons at the same time to move the mouse pointer diag
74. ches the rotation speed of the cooling fans If the projector is used at an altitude of about 1600 m or higher select HIGH Otherwise select NORMAL Note that the projector is noisier when the HIGH is selected HIGH NORMAL AUTO ADJUST Using the A V buttons to select one of the mode When the DISABLE is selected the automatic adjustment feature is disabled FINE FAST DISABLE Te FINE Finer tuning including H SIZE adjustment FAST Faster tuning setting H SIZE to prearranged data for the input signal e Depending on conditions such as input image signal cable to the projector environment around the projector etc the automatic adjustment may not work correctly In such a case please choose DISABLE to disable the automatic adjustment and make adjustment manually GHOST Adjust the settings using the A V buttons to eliminate ghosting FILTER MESSAGE Use the A V button to set the timer for notifying by the message when to replace the filter unit 100h e amp 5000h OFF After choosing an item except OFF the message REMINDER HRS PASSED will appear after the timer reaches the interval time set by this feature 8113 When the OFF is chosen the message will not appear Utilize this feature to keep the air filter clean setting the suitable time according to your environment of this projector e Please take care of the filter unit periodically even if there is no message If the air filter
75. cope with it according to the following table Cases not involving a machine defect The electrical power cord is not plugged in 15 Correctly connect the power cord The main power source has been interrupted during operation such as by a power outage blackout etc Please disconnect the power plug from the power outlet 19 19 and allow the projector to cool down at least 10 minutes then turn the power on again Power does not come on Either there is no lamp and or lamp cover or either of these has not been properly fixed Please turn the power off and disconnect the power plug from the power outlet and allow the projector to 106 cool down at least 45 minutes After the projector has sufficiently cooled down please make confirmation of the attachment state of the lamp and lamp cover and then turn the power on again The signal cables are not correctly connected 9 14 Correctly connect the connection cables Signal source does not correctly work Correctly set up the signal source device by referring to the manual of the source device Neither sounds The input changeover settings are mismatched boa A igh eae are Select the input signal and correct the settings The BLANK function for pictures and the MUTE function for sounds are working AV MUTE may be active 22 29 Refer to the item Sound does not come out and No 62 pictures are displayed on the next page to turn off the MUTE and B
76. creen CERD ST MY TEXT and press the ENTER or INPUT button ERS WRITING 1 character or all characters will be EEEE erased The MY TEXT can be input up spoirs to 24 characters on each line ALL CLEAR OK AIB C D EIFIGIH I1JIKIL IMIN 0 IRIA RSIT UIV WXYZ mp y 3 To change an already inserted alolelaleltlolhii i ik ilalniolelalr s tlulvlulxi viz 041 2131415161718191 1 Eeee LI character press the A button to ASSS ac bet move the cursor to one of the first 3 Oo o e oOo lines and use the lt gt buttons to CESTOOs DELETE move the cursor on the character to be changed After pressing the ENTER or INPUT button the character is selected Then follow the same procedure as described at the item 2 above 4 To finish entering text move the cursor to the OK on screen and press the gt ENTER or INPUT button To revert to the previous MY TEXT without saving changes move the cursor to the CANCEL on screen and press the lt ENTER or INPUT button e The MY TEXT WRITING function is available only when the MY TEXT PASSWORD function is set to OFF The CLONING operation under OPTION SERVICE menu is not available if CLONING LOCK ON is selected 8 mnexsxelaeslikolny Wook The projector has the following convenient tools that enable on screen presentations easily and quickly PC LESS Presentation below Drawing function Drawing function enables you to draw on the projector s screen with USBmouse or t
77. ct this item to display a dialog MODE Use the dialog to change the display mode as explained below e To change from Multi PC mode to Single PC mode select one of computers in the dialog using the A V lt buttons and press the ENTER or INPUT button Press the button to choose OK and then press ENTER or INPUT again The image for the selected computer is displayed on full screen continued on next page continued on next page 80 item i escription O O O e To change from Single PC mode to Multi PC mode press button to choose OK in the dialog and press the ENTER or INPUT button The display mode is changed e For details on how to switch the display mode to Multi PC mode on your computer refer to the CANCEL MULTI PC manual for LiveViewer CENTER SET MODE e The Presenter mode setting of the selected continued computer becomes valid when the display mode is changed to Single PC mode BU Be are a PRESENTATION Also the Presenter mode setting continued becomes invalid when the Cr display mode is changed to Multi EE PC mode regardless the setting eu on the computers er For details refer to the manual for LiveViewer amp MULTI PC MODE Selecting this item displays the user name This function helps you identify from which computer the DISPLAY current image is sent USER NAME You can set user names for each computer on LiveViewer For details refer to t
78. ctor immediately Otherwise if a problem occurs with the projector the following checks and measures are recommended before requesting repair If this does not resolve the problem please contact your dealer or service company They will tell you what warranty condition is applied Related messages When some message appears check and cope with it according to the following table Although these messages will be automatically disappeared around several minutes it will be reappeared every time the power is turned on There is no input signal Please confirm the signal input connection and the status of the signal source The USB TYPE B port is selected as the picture input source even if MOUSE is selected for USB TYPE B 159 USB DISPLAY is invalid Select USB DISPLAY in the dialog to project the picture aad Sid i ace input to the USB TYPE B port In this case you cannot use CD COMPUTER IN 1 NO INPUT IS DETECTED the simple mouse and keyboard function Otherwise select other port for picture input Projector is waiting for an image file Check the hardware connection settings on the projector and network related settings Se TEES The computer Projector network connection might be EE E disconnected Please re connect using Connect button of ict S the LiveViewer Using the LiveViewer in the User s Manual Network Guide Waiting for connection continued on next page 112 Related messages
79. d on next page 61 item ieseription O e ACTIVE IRIS Changes the active iris mode e PICTURE MODE Changes the PICTURE MODE 433 FILTER RESET Displays the filter time reset confirmation dialogue L460 e TEMPLATE Makes the template pattern selected to the TEMPLATE item 2156 appear or disappear e AV MUTE Turns the picture and audio on off e D ZOOM Turns the D ZOOM mode on off When the D ZOOM MY BUTTON mode is on use the lt gt cursor buttons to adjust the Continued magnification ratio e D SHIFT Turns the D SHIFT mode on off When the D SHIFT mode is on use the A W lt cursor buttons to move the magnifying area e RESOLUTION Turns on off the RESOLUTION dialog 43 e MIC VOLUME Turns on off the MIC VOLUME dialog 151 e ECO MODE Turns on off the ECO MODE G47 e SAVER MODE Turns on off the SAVER MODE 47 Using A V buttons selects the picture input port to be selected with pressing the MY SOURCE DOC CAMERA button on the remote control MY SOURCE You can use this function not only for document cameras but also computers and other equipment CeoMesteR IN1 lt lt COMPUTER IN2 LAN USB TYPE A q VIDEO S VIDEO HDMI USB TYPE B continued on next page 62 Selecting this item displays the SERVICE menu Select an item using the A V buttons and press the gt button or the ENTER button on the remote control to execute the item ALTITUDE Using the A V buttons swit
80. d ones as the input ports of the projector are recessed continued on next page Connecting with your devices continued About Plug and Play capability e Plug and Play is a system composed of a computer its operating system and peripheral equipment i e display devices This projector is VESA DDC 2B compatible Plug and Play can be used by connecting this projector to a computer that is VESA DDC display data channel compatible Take advantage of this feature by connecting a computer cable to the COMPUTER IN1 port DDC 2B compatible Plug and Play may not work properly if any other type of connection is attempted Please use the standard drivers in your computer as this projector is a Plug and Play monitor e When AUTO is selected for the COMPUTER IN1 or COMPUTER IN2 port in COMPUTER IN of the INPUT menu that port will accept component video signals 4142 e When the USB TYPE B port and the computer s type A USB port are connected you can use the USB TYPE B port as a picture input port from the computer or use the remote control as a simple mouse and keyboard of the computer 418 Computer VCR DVD Blu ray Disc player a3 OO Q O E uss oO 0 5A 0000 COMPONENT AV1dSIG INO oiany S VIDEO VIDEO IZEZ SY
81. d pull out the power cord s plug from the outlet Do not touch the USB wireless adapter while the projector is receiving AC power gt To connect both the LAN cable and USB device to the projector use a LAN cable that is flat on the side where the plug s wire is visible Otherwise both of them cannot be connected correctly or the wire may break malfunction continued on next page 13 Connecting with your devices continued NOTE If an oversized USB storage device blocks the LAN port use a USB extension cable to connect the USB storage device e The HDMI port of this model is compatible with HDCP High bandwidth Digital Content Protection and therefore capable of displaying a video signal from HDCP compatible DVD players or the like The HDMI supports the following signals Video signal 480i 60 480p 60 576i 50 5 6p 50 720p 50 60 1080i 50 60 1080p 50 60 Audio signal Format Linear PCM Sampling frequency 48kHz 44 1kKHz 32kHz This projector can be connected with another equipment that has HDMI connector but with some equipment the projector may not work properly something like no video Be sure to use an HDMI cable that has the HDMI logo Use a Category 2 certified HDMI cable to input 10800 50 60 signal to the projector When the projector is connected with a device having DVI connector use a DVI to HDMI cable to connect with the HDMI input e Up to one USB wireless adapter opti
82. ding to the an aala following table Toa COMPUTER IN 1 1024 x 768 60Hz item scription O O Using the A V buttons switches the mode for aspect ratio For a computer signal NORMAL 4 3 16 9 16 10 NATIVE EEE For an HDMI signal NORMAL 4 3 16 9 16 10 14 9 NATIVE For a video signal s video signal or component video signal 4 3 16 9 16 10 amp 14 9 NATIVE Me eS SS U 7 For an input signal from the LAN USB TYPE A or USB TYPE B port or if there is no signal CP A222WN CP A302WN 4 3 fixed CP AW252WN 16 10 fixed e The NORMAL mode keeps the original aspect ratio of the signal Using the lt gt buttons adjusts the over scan ratio Small It magnifies picture Large It reduces picture e This item can be selected only for a video s video and component video signal OVER SCAN e For an HDMI signal this item can also be selected if either 1 or 2 applies 1 HDMI FORMAT item in the INPUT menu is set to VIDEO 2 HDMI FORMAT item in the INPUT menu is set to AUTO and the projector recognizes that it receives video signals continued on next page 3 item scription O O O O Using the lt buttons adjusts the vertical position Down Up e Over adjusting the vertical position may cause noise to appear on the screen If this occurs please reset the vertical position to the default setting Pressing the RESET button when the V POSITION V POSITION is
83. do not do anything the dialog will automatically disappear after about 30 seconds e f you want to move the menu position use the cursor buttons after pressing the POSITION button e Some functions cannot be performed when a certain input port is selected or when a certain input signal is displayed e When you want to reset the operation press RESET button on the remote control during the operation Note that some items ex LANGUAGE VOLUME cannot be reset e In the ADVANCED MENU when you want to return to the previous display press the lt cursor button or ESC button on the remote control Indication in OSD On Screen Display BRIGHTNESS 4 MY MEMORY _LOAD 4 RETURN FILTER TIME TEMPORARY CONDITION A RESET ARE YOU SURE M YOU WISH TO LOAD EXIT The meanings of the general words on the OSD are as follows T pressing the MENU button RETURN Selecting this word returns the menu to the previous menu CANCEL or NO Selecting this word cancels the operation in the present menu and returns to the previous menu OK or YES Selecting this word executes the prepared function or shifts the menu to the next menu 31 JASMENO 5 EASY MENU SELECT From the EASY MENU items shown in the table 5 below can be performed eae Peele Select an item using the A V cursor buttons Then gente ai i as perform it according to the following table Se ae ce INSTALLATION 2 RESET EAECUTE FILTER TIME Oh
84. e lt ENTER or INPUT button OK continued on next page 78 item Description O Selecting this item displays the MY MY IMAGE IMAGE Menu IMAGE 2 PRESENTATIONFILE Use the application to transfer the im his a a A age data It can be downloaded fom QO the Hitachi web site Use the A V buttons to select an item which is a still image by the MY IMAGE My Image Function in the Network Guide and the gt or ENTER button to display the image e The item without image stored cannot be selected e The image names are each displayed in 16 characters or less MY IMAGE To switch the image displayed Use the A V buttons To return to the menu Press the lt button on the remote control To erase the image displayed and its source file in the projector 1 Press the RESET button on the remote control while displaying an image to display HEL MA the MY IMAGE DELETE menu x ce MY IMAGE 2 Press the button to perform to erase To stop erasing press the lt button Use the A V buttons to turn the AMX Device Discovery on off AMX D D oe AMX Device When ON is selected the projector can be detected by controllers Discovery of AMX connected to the same network For the details of AMX Device Discovery visit the AMX web site URL http www amx com as of Dec 2011 continued on next page 19 PRESENTATION Selecting this item displays the PRESENTATION menu Use A V buttons to select one of
85. e PIN LOCK on off menu 2 2 Use the A V buttons to select OFF and the Enter PIN Code box will be displayed Enter the registered PIN code to turn the PIN LOCK function off If an incorrect PIN code is input 3 times the projector will turn off 3 If you have forgotten your PIN code 3 1 While the Enter PIN code box is displayed press and hold the RESET button for 3 seconds or press and hold the INPUT button for 3 seconds while pressing the button on the projector The 10 digit Inquiring Code will be displayed g STEEN e If there is no key input for about 5 minutes Seer while the Inquiring Code is displayed the 01 2345 6789 projector will turn off 3 2 Contact your dealer with the 10 digit Inquiring Code Your PIN code will be sent after your user registration information is confirmed 4 A GOMPUTER S continued on next page 84 item scription O O If this function is set to ON and the vertical angle of the projector or the INSTALLATION setting is different Poon from the previous recorded setting the TRANSITION trom previously installed position DETECTOR ON alarm will be displayed and the input bp e signal will not be displayed E ac e To display the signal again set this function OFF e After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm the lamp will turn off e Keystone adjustment feature has been prohibited as long as the TRANSITION DETECTOR function is on 1 Turning on the
86. e defects continued Reference Phenomenon Cases not involving a machine defect The sound When LAN USB TYPE A or USB TYPE B port is or image selected some ports of the output may be missing is unstable due to signal processing delay 22 50 or is output Change the signal or use another port intermittently The computer The computer cannot start up in the current hardware connected to the configuration USB TYPE B port Disconnect the USB cable from the computer then 10 of the projector reconnect it after starting up the computer does not start up The SAVING function is working 48 Select NORMAL for STANDBY MODE item in the SETUP menu RS 232C does The COMMUNICATION TYPE for the CONTROL port is not work set to NETWORK BRIDGE Select OFF for COMMUNICATION TYPE item in the OPTION SERVICE COMMUNICATION menu The SAVING function is working 48 Select NORMAL for STANDBY MODE item in the SETUP menu Network does The same network address is set for both wireless and wired not work LAN Change the network address setting for wireless or wired be 40 LAN NETWORK The NETWORK BRIDGE function is turned off BRIDGE select NETWORK BRIDGE for COMMUNICATION TYPE function does item in the OPTION SERVICE COMMUNICATION menu not work The SAVING function is working 48 Select NORMAL for STANDBY MODE item in the SETUP menu Schedule function The internal clock has been reset does not work
87. e may be some noise and the screen may flicker for a moment when loading data This is not malfunction a U m za ms m O 4 u 4 LJ _ FD i 0 d 0 t 4 E l Ae 3 A e CENTER Oe e m continued on next page 46 item scription O O e While the distortion is adjusted with the PERFECT FIT function keystone adjustment feature is unavailable To correct the keystone distortion reset the adjustment of all the corners and sides e The adjustable range of this correction will vary among inputs For some input this function may not work well e One adjustment position common to the top and bottom sides can be set Also another adjustment position common to the left and right sides can be set e The distortion of the top and bottom sides can be adjusted only in the same direction pincushion or barrel The adjustment for the left and right sides is carried out in the same manner e This function will be unavailable when the TRANSITION DETECTOR is on 4485 Using the A V buttons turns on off the AUTO ECO MODE ON amp OFF AUTO ECO MODE When ON is selected the projector will always be set to Eco mode at start up regardless of the ECO MODE 2147 setting An OSD message AUTO ECO MODE will be displayed for tens of seconds when the projector starts with this function activated Using the A V buttons switches the ECO MODE NORMAL amp ECO INTELLIGENT ECO SAV
88. e name already exists it will be overwritten by operating the SAVE function Loading function e Please note that saved data from other model cannot be loaded e Please note that if any of the following functions MyScreen PASSWORD PIN LOCK TRANSITION DETECTOR MY TEXT PASSWORD under SECURITY menu or MyScreen Lock under SCREEN menu is ON the respective saved data cannot be loaded continued on next page 69 ltem i esecription Loading function continued e Please note that the saved data of KEYSTONE under SETUP menu cannot be loaded if TRANSITION DETECTOR under SECURITY menu is ON e Please note that the saved data of START UP and MyScreen Lock under SCREEN menu cannot be loaded if MyScreen PASSWORD under SECURITY menu is ON e Please note that the saved data of MY TEXT WRITING cannot be loaded if MY TEXT PASSWORD under SECURITY menu is ON CLONING continued INFORMATION Selecting this item displays a dialog titled INPUT INFORMATION It shows the information about the current input SERVICE TAN a INPUT _INFORNATION T INPUT _INFORMATION COMPUTER IN 1 S VIDEO COMPUTER IN 1 PAL 1080i 60H continued 1024 x 768 60Hz FRAME LOCK AUTO D RETURN X EXIT 4 RETURN EXIT 4 RETURN XEXIT e The FRAME LOCK message on the dialog means the frame lock function is working e This item can t be selected for no signal and sync out e When the MY TEXT DISPLAY is set to ON the MY T
89. ea NOTE If you click the Start capture button and or Stop button repeatedly images may not be displayed on the screen 100 USB Display Windows computer continued Options window If you select the Option button on the Floating menu the Options window is displayed Settings About Optimize Performance E Transmission speed Optimize Performance The LiveViewer Lite for USB captures screenshots in JPEG data and sends them to the projector The LiveViewer Lite for USB has two options that have different compression rate of JPEG data Transmission speed Speed takes priority over Image quality It makes JPEG compression rate higher The screen on the projector is rewritten quicker because the transferred data is smaller but the image quality is worse Image quality Image quality takes priority over Speed lt makes JPEG compression rate lower The screen on the projector is rewritten slower because the transferred data is larger but the image quality is better Keep PC resolution If you remove the check mark from the Keep PC resolution box the screen resolution of your computer will be switched as follows and the display speed may be faster CP A222WN CP A302WN 1024 x 768 XGA CP AW252WN 1280 x 800 WXGA lf your computer does not support the display resolution specified above a smaller resolution that is the largest among the resolutions that are supported by the computer will be selected Sound Turns
90. ed 430 or Cursor A V buttons when a menu is displayed 430 The lt A V buttons on the projector work only as the cursor buttons while the template is displayed L456 Ports LL9 14 1 USB TYPE A port x2 9 AUDIO OUT L R ports 2 LAN port 10 COMPUTER IN1 port 3 HDMI port 11 COMPUTER IN2 port 4 USB TYPE B port 12 MONITOR OUT port 5 MIC port 13 CONTROL port 6 AUDIO IN1 port 14 VIDEO port 7 AUDIO IN2 port 15 S VIDEO port 8 AUDIO IN3 L R ports 1 4 3 11 10 USB TYE B HE MI COMPUTER IN2 SONE TER IN1 ea o N v Se BOC ol m O J AUDIOIN2 AUDIOINT MIC J h 15 14 9 8 13 7 6 5 12 Part names continued Remote control VIDEO button 23 COMPUTER button 2123 SEARCH button 24 STANDBYION button 0419 ASPECT button M24 AUTO button 126 0 BLANK button 129 MAGNIFY ON button 228 MAGNIFY OFF button 228 MY SOURCE DOC CAMERA button 123 62 11 VOLUME button 422 12 PAGE UP button 178 13 PAGE DOWN button L418 14 VOLUME button 1122 15 MUTE button 22122 16 FREEZE button 4129 17 MY BUTTON 1 button 167 18 MY BUTTON 2 button M61 19 KEYSTONE button 227 20 FOCUS button 4126 21 FOCUS button 4126 2 3 4 5 6 1 8 9 1 2 3 4 5
91. en the required accessory did not come with the product or the accessory is damaged After making sure that the device and projector are turned off connect them following the instructions below AWARNING P Use only the appropriate accessories Otherwise it could cause a fire or damage to the device and the projector Use only the accessories specified or recommended by the projector s manufacturer Consult your dealer when the required accessory did not come with the product or the accessory is damaged It may be regulated under some standard For a cable with a core at only one end connect the end with the core to the projector That may be required by EMI regulations Neither disassemble nor modify the projector and the accessories Do not use the damaged accessory Be careful not to damage the accessories Route a cable so that it is neither stepped on nor pinched out ACAUTION P gt Do not turn on or off the projector while connected to a device in operation unless that is directed in the manual of the device Otherwise it may cause malfunction in the device or projector gt Be careful not to mistakenly connect a connector to a wrong port Otherwise it may cause malfunction in the device or projector When connecting a connector to a port make sure that the shape of the connector fits the port Tighten the screws to connect a connector equipped with screws to a port Use the cables with straight plugs not L shape
92. eo signal s video signal or component video signal 4 3 gt 16 9 gt 16 10 gt 14 9 gt NATIVE __ ee O For an input signal from the LAN USB TYPE A or USB TYPE B port or if there is no signal CP A222WN CP A302WN 4 3 fixed CP AW252WN 16 10 fixed e ASPECT button does not work when no proper signal is inputted e NORMAL mode keeps the original aspect ratio setting e The on screen menu might be displayed outside of the image display area depending on the adjustment value of the ASPECT D ZOOM VJ KEYSTONE and K KEYSTONE Changing the values of ASPECT D ZOOM KEYSTONE and KEYSTONE may fix the symptom 24 Adjusting the projector s elevator The projector has Front foot for inclinations and Rear foot for horizontals Spacers on the each elevator foot are installed at the time of shipment and projector is in a condition to be able to just project If necessary detach the spacer and the elevator feet can be manually twisted to make more precise adjustments a _ L A r Ta o EEEE en 1 1 Spacer ai y Rear foot Spacer Small NOTE The adjustment angle can be adjusted up to plus or minus 1 each of FRONT and REAR foot e After the foot is adjusted it is possible to return it to the state of the shipment with a spacer Install Large on the Front foot and Small on the Rear foot of the spacer If change the setting place of the projector it will recommend keep and reuse the spacers
93. ess the ENTER or INPUT button 2 Adjust the distortion as below Use the A VW lt b buttons to adjust the position of the corner Use the A V buttons to adjust the distortion of the top or bottom side after defining the adjusting position with the lt gt buttons Use the lt gt buttons to adjust the distortion of the left or right side after defining the adjusting position with the A V buttons 3 To adjust another corner or side follow the same procedure from 1 above To reset the adjustment of all the corners and sides select RESET with the A W lt b buttons and press the ENTER or INPUT button 4 This projector is equipped with a memory feature for PERFECT PERTEC ETE FIT adjustment Up to 3 sets of adjustments can be stored e SAVE To store the current PERFECT FIT adjustment select one of the SAVE icons numbered 1 to 3 number of the memory with the lt 4 A Y buttons and press the ENTER or INPUT button Remember that the current data being stored of a memory will be lost by saving new data into the memory e LOAD To recall stored adjustments select one of the LOAD icons MA numbered 1 to 3 number of the memory with the lt A V buttons and press the ENTER or INPUT button Remember that the current adjusted condition will be lost by loading data If you want to keep the current adjustment please save it before performing a LOAD function The LOAD functions whose linked memory has no data are skipped Ther
94. ff off Please refer to Schedule Settings section of User s seconds Manual Network Guide continued on next page 115 Regarding the indicator lamps continued POWER LAMP TEMP Descrintion indicator indicator indicator p Lighting Lighting Lighting Loading the saved data of CLONING on STANDBY In Orange In Red In Red MODE Blinking Blinking Blinking repel shee nog data of CLONING has failed on In Orange Please refer to CLONING E167 69 Turned Turned Turned Loading the saved data of CLONING has off off off succeeded on STANDBY MODE NOTE When the interior portion has become overheated for safety purposes the projector is automatically shut down and the indicator lamps may also be turned off In such a case disconnect the power cord and wait at least 45 minutes After the projector has sufficiently cooled down please make confirmation of the attachment state of the lamp and lamp cover and then turn the power on again 116 Resetting all settings When it is hard to correct some wrong settings the FACTORY RESET function of SERVICE item in OPTION menu 70 can reset all settings except settings such as LANGUAGE LAMP TIME FILTER TIME FILTER MESSAGE SECURITY and NETWORK to the factory default Be sure to set ALTITUDE after resetting all the settings HL163 Phenomena that may be easy to be mistaken for machine defects About the phenomenon confused with a machine defect check and
95. for all the items of the PICTURE menu selecting a function using the A V buttons and pressing the gt or ENTER button performs each function Ce SAVE 2 SAVE 3 SAVE 4 LOAD 4 LOAD 3 LOAD 2 LOAD 1 SAVE 1 SAVE 2 SAVE 3 SAVE 4 Performing a SAVE function saves the current adjustment data into the memory linked in the number included in the function s name e Remember that the current data being stored of a memory will be lost by saving new data into the memory MY MEMORY LOAD 1 LOAD 2 LOAD 3 LOAD 4 Performing a LOAD function loads the data from the memory linked in the number included in the function s name and adjusts the picture automatically depending on the data e The LOAD functions whose linked memory has no data are skipped e Remember that the current adjusted condition will be lost by loading data If you want to keep the current adjustment please save it before performing a LOAD function e There may be some noise and the screen may flicker for a moment when loading data This is not malfunction e You can perform the LOAD function using MY BUTTON Please see MY BUTTON item in OPTION menu 467 IWASE Taney From the IMAGE menu items shown in the table eRe ae PICTURE ASPECT NORMAL below can be performed hace OVER SCAN Select an item using the A V cursor buttons and t SETUP gt H POSITION press the cursor button or ENTER button to G SCREEN oe execute the item Then perform it accor
96. g to use this feature A dark picture may still be incorrectly adjusted Use a bright picture when adjusting O For a video signal and s video signal FOCUS button FOCUS button AUTO button ASPECT JTO SEARCH BLANK MAGNIFY cEvE PAGE cae CI DowN lt 1 T MYBUTTON MUTE vougo M FOCUS m D ZOO I AIA Al The video format best suited for the respective input signal will be selected automatically This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu 2141 The vertical position and horizontal position will be automatically set to the default O For a component video signal The vertical position and horizontal position will be automatically set to the default The horizontal phase will be automatically adjusted e The automatic adjustment operation requires approx 10 seconds Also please note that it may not function correctly with some input e When this function is performed for a video signal a certain extra such as a line may appear outside a picture e When this function is performed for a computer signal a black frame may be displayed on the edge of the screen depending on the PC model e The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu 463 26 Adjusting the position Press the POSITION but
97. he filter cover to clean up the coarse meshed filter If the I Filter filters are damaged or heavily soiled replace them coarse meshed with new ones Filter fine meshed 7 Put the fine meshed filter on the coarse meshed one SOs lt _ Stitched turning its stitched side up side nhh Q Put the filter unit back into the projector continued on next page 108 Cleaning and replacing the air filter continued o Turn the projector on and reset the filter time using the FILTER TIME item in the EASY MENU 1 Press the MENU button to display a menu 2 Point at the FILTER TIME using the W A button then press the gt button A dialog will appear 3 Press the button to select OK on the dialog It performs resetting the filter time NOTE Please replace the air filter when it is damaged or heavily soiled e When you replace the projection lamp please replace the air filter An air filter of specified type will come together with a replacement lamp for this projector e Please reset the filter time only when you have cleaned or replaced the air filter for a suitable indication about the air filter e The projector may display the message such as CHECK THE AIR FLOW or turn off the projector to prevent the internal heat level rising 109 Caring for the mirror and lens If the projection mirror or lens is flawed soiled or fogged it could cause deterioration of display quality Please take
98. he manual for LiveViewer Executing this item restarts and initializes the network functions Choose the NETWORK RESTART EXECUTE using the button gt SERVICE RETURN Then use the button to execute SERVICE amp NETWORK RESTART OK Network will be once cut off when choose restart lf DHCP is selected on IP address may be changed After selecting NETWORK RESTART EXECUTE NETWORK menu may not be controlled approx 30 seconds 81 SSG NYC Tanketau m ADVANCED MENU amp PICTURE ENTER PASS ORD This projector is equipped with security functions Sai From the SECURITY menu items shown in the table ae below can be performed rae To use SECURITY menu User registration is required e eei before using the security functions l EASY MENU Enter to the SECURITY menu COMPUTER IN 1024 x 768 60Hz 1 Press the gt button The ENTER PASSWORD box will be displayed 2 Use the A W lt b buttons to enter the registered password The Sa factory default password is as follows ENTER PASSWORD CP AW252WN 4815 a Seer x This password can be changed LLbelow Move the cursor to the right side of the ENTER PASSWORD box and press the gt button to cue age display the SECURITY menu ML MY TEXT PASSWORD OFF e It is strongly recommended the factory default password to be a ey ane OFF changed as soon as possible _ amp CLONING LOCK OFF If an incorrect password is input the ENTER PASSWORD box Bie will be displayed
99. in extra such as a line may appear outside a picture e When this function is performed for a computer signal a black frame may be displayed on the edge of the screen depending on the PC model e The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu B63 39 INIPACI Tavera m ADVANCED MENU From the INPUT menu items shown in the table PICTURE PROGRESSIVE below can be performed aI Y cOLon space Select an item using the A V cursor buttons and D AUDIO HDMI FORMAT press the cursor button or ENTER button to a oPTIN ER execute the item Then perform it according to the ssar E a z EAIT fol lowi ng table n COMPUTER IN 1 1024 x 768 60Hz item ieseription Using the A V buttons switches the progress mode TV FILM OFF ee e This function works only for a video signal s video signal component video signal of 480i 60 or 576i 50 or 1080i 50 60 and an HDMI PROGRESSIVE signal of 480i 60 or 576i 50 or 1080i 50 60 e When TV or FILM is selected the screen image will be sharp FILM adapts to the 2 3 Pull Down conversion system But these may cause a certain defect for example jagged line of the picture for a quick moving object In such a case please select OFF even though the screen image may lose sharpness Using the A V buttons switches the noise reduction mode HIGH MID amp LOW ee VIDEO NR e This f
100. ing A V buttons Choose STANDBY to select the picture smert output in the standby mode ue i A ry MONITOR OUT 2 Select one of the COMPUTER IN ports Eai using lt gt buttons Use PED Select OFF to disable the MONITOR OUT fi port for the input port or standby mode STANDBY chosen in the step 1 e You cannot select COMPUTER IN1 in step 1 and COMPUTER IN2 in step 2 and vice versa OR ROR OROROR OR CHAO eam O0OJ0000000 N Olo0oo0oo0o00000 49 JNU D KO MIEN ees From the AUDIO menu items shown in the table below BSE me can be performed Select an item using the A V cursor ahoo t MIG VOLUME buttons and press the cursor button or the ENTER OPTION button to execute the item Then perform it according to piein EXI the following table COMPUTER INT 102 x 768 0z item escription O VOLUME Using the lt i gt buttons adjusts the volume Low High Using the A V buttons turns on off the built in speaker ON amp OFF When OFF is selected the built in speaker does not work While the image signal from the input port chosen in step 1 is projected the audio signal from the input port selected in step 2 is output to both the AUDIO OUT port and built in speaker of this projector However the built in soeaker does not work when SPEAKER is set to OFF e aetan aaa 1 Choose a picture input port using the imi A V buttons COMPUTER IN 2 Choose STANDBY to select the sound ESZ output in
101. itches the mode for the template screen Press the cursor or the ENTER button to display the selected template and press the lt cursor button to close the displayed screen The last selected template is displayed when the MY BUTTON allocated to the TEMPLATE function is pressed 262 TEMPLATE TEST PATTERN DOT LINE1 DOT LINE2 amp DOT LINE3 2 MAP2 MAP1 CIRCLE2 CIRCLE1 DOT LINE4 You can turn a map upside down and scroll it horizontally when MAP1 or MAP2 is selected To invert or scroll the map display the guidance by pressing the RESET button on the remote three seconds or more when MAP1 or MAP2 appears continued on next page 56 item Deseripon The C C is the function that displays a _ transcript or dialog of the audio portion of a video files or other presentation or other CHANNEL relevant sounds It is required to have NTSC sia format video or 480i 60 format component video source supporting C C feature to utilize this function lt may not work properly depending on equipment or signal source In this case please turn off the Closed Caption DISPLAY select Closed Caption DISPLAY setting from following options using A V buttons AUTO ON OFF Li ff CAPTIONS 1 AUTO Closed Caption automatically displays when the volume is muted ON Closed Caption is on OFF Closed Caption is off e The caption is not displayed when the OSD menu is active e The Cl
102. jector causing image degradation or other problems gt Position the projector to prevent light from directly hitting the projector s remote sensor gt Do not place the product in a place where radio interference may be caused gt Do not place this product in a magnetic field gt If the projector is used at an altitude of about 1600 m or higher set ALTITUDE of the SERVICE item in the OPTION menu to HIGH L163 Otherwise set it to NORMAL lf the projector is used with a wrong setting it may cause damage to the projector itself or the parts inside continued on next page Arrangement continued NOTE The projector may make a rattling sound when tilted moved or shaken since a flap to control the air flow inside of the projector has moved Be aware that this is not a failure or malfunction e The incoming light to the screen from the projector has a large angle While the white image is on the screen you may see it with colors but this is because of the type of the screen used or the angles viewed and it is not a malfunction e When the ambient temperature is around 35 to 40 C the brightness of lamp is reduced automatically Connecting with your devices Before connecting the projector to a device consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories such as a cable in accord with the signal of the device Consult your dealer wh
103. l be displayed instead of the screen of input signal Please refer to BLANK item in SCREEN menu 0152 To exit from the BLANK screen and return to the input signal screen press BLANK button again e The projector automatically exits from the BLANK mode when some control buttons are pressed NOTE The sound is not connected with the BLANK screen function If necessary set the volume or mute first To display the BLANK screen and mute the sound at one time use AV MUTE function L462 29 Using the menu function This projector has the following menus PICTURE IMAGE INPUT SETUP AUDIO SCREEN OPTION NETWORK SECURITY and EASY MENU EASY MENU consists of functions often used and the other menus are classified into each purpose and brought together as the ADVANCED MENU Each of these menus Is operated using the same methods While the projector is displaying any menu the MENU button on the projector works as the cursor buttons The basic operations of these menus are as follows MENU INPUT STANDBY ON 2 Ol MENU button 4 y Cursor buttons Vg ENTER button MENU button POWER rous Cursor buttons TEMP a a ANN MENU z MN osgo LAMP y POSITION ESC button RESET button 1 To start the MENU press the MENU button The MENU you last used EASY or ADVANCED will appear EASY MENU has priority to appear just after powered on ii
104. lect ON The UUM Mee i RETURN EXIT ENTER NEW PASSWORD box small will ENTER NEW PASSWORD l be displayed ooool gt 1 3 Use the A gt buttons to enter the ENTER NEW PASSWORD password Move the cursor to the right side box small of the ENTER NEW PASSWORD box small and press the button to display the NEW PASSWORD AGAIN box and then enter the same password again 1 4 Move the cursor to the right side of the p e NEW PASSWORD AGAIN MY TEXT NEW PASSWORD AGAIN box and press aor PASSWORD gt button to display the NOTE NEW PASSWORD box for about 30 seconds then QMEN please make note of the password during NOTE NEW PASSWORD this time whee Pressing the ENTER button on the remote control or button on the projector will return to the MY TEXT PASSWORD on off menu 2 Turning off the MY TEXT PASSWORD 2 1 Follow the procedure in 1 1 to display the MY TEXT PASSWORD on off menu 2 2 Select OFF to display the ENTER ES PASSWORD box large Enter the Sa CRSISSEORE registered password and the screen will ee e return to the MY TEXT PASSWORD on off on menu ENTER PASSWORD box If an incorrect password is input the menu will close large lf necessary repeat the process from 2 1 3 If you have forgotten your password 3 1 Follow the procedure in 1 1 to display the MY TEXT PASSWORD on off menu 3 2 Select OFF to display the ENTER PASSWORD box large The 10 digit inquiring code will be displayed inside
105. lign and insert the two AA batteries HITACHI MAXELL or HITACHI MAXELL ENERGY Part No LR6 or R6P according to their plus and minus terminals as indicated in the remote control 3 Replace the battery cover in the direction of the arrow and snap it back into place AWARNING P Always handle the batteries with care and use them only as directed Improper use may result in battery explosion cracking or leakage which could result in fire injury and or pollution of the surrounding environment e Be sure to use only the batteries specified Do not use batteries of different types at the same time Do not mix a new battery with used one e Make sure the plus and minus terminals are correctly aligned when loading a battery e Keep a battery away from children and pets e Do not recharge short circuit solder or disassemble a battery e Do not place a battery in a fire or water Keep batteries in a dark cool and dry place e If you observe battery leakage wipe out the leakage and then replace a battery If the leakage adheres to your body or clothes rinse well with water immediately e Obey the local laws on disposing the battery About the remote control signal Remote The remote control works with the projector s remote sensor This projector has a remote sensor on the front The sensor senses the signal within the following range when the sensor is active 60 degrees 30 degrees to the left and right of the sensor within 3 meters about
106. ll Screen is displayed e The image quality may deteriorate when playing back audio data included in a movie If you want to give priority to the image quality turn off the sound by setting to off e If one of the AUDIO IN ports is selected or X is selected for USB TYPE Ain AUDIO SOURCE of the AUDIO menu 450 J cannot be operated e Some error icons will be displayed in the Thumbnail This file seems to be broken or not supported format ao A A file that cannot be displayed on the thumbnail screen is indicated by a file format icon fz te net 92 PC LESS Presentation continued Full Screen Mode The Full Screen mode shows a full display image To display in Full Screen mode select an image in the Thumbnail screen Then press the ENTER button on the remote control the INPUT button on the control panel or click ENTER on the Web Remote Control Full screen display Operations for still images The following operations are enabled in the Full Screen mode while a still image is displayed Button operation The remote Gono Control panel Control pane Wet Remote control Control V gt Shows the next file or or PAGE DOWN PAGE DOWN A lt or or PAGE UP PAGE UP ENTER INPUT ENTER Displays Thumbnail Shows the previous file 93 PC LESS Presentation continued Operations for movie A remote control icon and a progress bar are w i displayed when one of the curso
107. ls see the manual of the security tool N an ete iai i j Geese IEE Cem a CN NEN CANA N N V Lo YAE E y LNA n Y Mn ON Y oma a a aaa a aai a y Anti theft chain or wire AWARNING PDo not use the security bar and slot to prevent the projector from falling down since it is not designed for it 4 CAUTION PDo not place anti theft chain or wire near the exhaust vents lt may become too hot NOTE The security bar and slot is not comprehensive theft prevention measures It is intended to be used as supplemental theft prevention measure 15 Using the cable cover Utilize the cable cover as the guard and blind for the connecting parts 1 Connect the signal cables and the power cord to the projector first 2 Combine parts as shown in figure and assemble the cable cover 3 Insert the three knobs on the cable cover into the three holes on the projector as shown in the figure Pass the cables through the holes on the bottom of the cable cover p knobs lt 1 ali INI ll Zs RONN COLMAR Installing the batteries Please insert the batteries into the remote control before using it If the remote control Starts to malfunction try to replace the batteries If you will not use the remote control for long period remove the batteries from the remote control and store them in a safe place 4 Holding the hook part of the battery cover remove it 2 A
108. ly for a video s video and component COLOR video signal e For an HDMI signal this item can also be selected if either 1 or 2 applies 1 HDMI FORMAT item in the INPUT menu is set to VIDEO 2 HDMI FORMAT item in the INPUT menu is set to AUTO and the projector recognizes that it receives video signals Using the lt gt buttons adjusts the tint Reddish Greenish e This item can be selected only for a video s video and component TINT video signal e For an HDMI signal this item can also be selected if either 1 or 2 applies 1 HDMI FORMAT item in the INPUT menu is set to VIDEO 2 HDMI FORMAT item in the INPUT menu is set to AUTO and the projector recognizes that it receives video signals continued on next page 35 itm Using the lt gt buttons adjusts the sharpness Weak Strong e There may be some noise and or the screen may flicker for a moment when an adjustment is made This is not a malfunction Using the A V cursor buttons changes the active iris control mode PRESENTATION THEATER OFF wee PRESENTATION The active iris displays the best presentation ACTIVE IRIS image for both bright and dark scenes THEATER The active iris displays the best theater image for both bright and dark scenes OFF The active iris is always open e The screen may flicker when the PRESENTATION or THEATER modes are selected If this occurs select OFF This projector has 4 memories for adjustment data
109. move the microphone away from the speaker e This projector doesn t support plug in power for the microphone continued on next page 12 Connecting with your devices continued To use network functions of the projector connect the LAN port with the computer s LAN port or with an access point that is connected to the computer with wireless LAN using a LAN cable To use NETWORK BRIDGE function also connect the CONTROL port and an RS 232C port of the external device to communicate as a network terminal See the User s Manual Network Guide for details of the network functions Computer Access point LAN USBTYPEA RS 232C COMPUTER IN2 COMPUTER IN1 USB storage device ee AUDIOIN2 AUDIOINi MIC A CAUTION Pp Before connecting the projector to a network system be sure to obtain the consent of the administrator of the network gt Do not connect the LAN port to any network that might have the excessive voltage gt The designated USB wireless adapter that is sold as an option is required to use the wireless network function of this projector gt Before removing the USB storage device from the port of the projector be sure to use the REMOVE USB function on the thumbnail screen to secure your data 41971 gt Do not use any extension cable or device when connecting the adapter to the projector Before you insert or pull out the USB wireless adapter from the projector turn off the power of the projector an
110. nge The lens door will close right after the lamp goes off However to maintain better picture quality the lens door will close after the lamp has been cooled down when the projector is installed upside down such as in ceiling mount installation Then POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete 4114 Do not turn the projector on for about 10 minutes or more after turning it off Also do not turn the projector off shortly after turning it on Such operations might cause the lamp to malfunction or shorten the lifetime of some parts including the lamp NOTE Turn the power on off in right order Please power on the projector prior to the connected devices e This projector has the function that can make the projector automatically turn on off Please refer to the DIRECT POWER ON 4158 and AUTO POWER OFF 459 items of the OPTION menu 21 Operating VOLUME button Adjusting the volume 1 Use the VOLUME VOLUME buttons to adjust the volume A dialog will appear on the screen to aid you in adjusting the volume If you do not do anything the dialog will automatically disappear after about ten seconds e When is selected for current picture input port the volume adjustment is disabled Please see AUDIO SOURCE item of AUDIO menu 450 e Even if the projector is in the standby mode the volume is adjustable when both of the following conditions are true An option other
111. ngs of the projector can be coppied via USB memory SAVE Saves each settings of the projector to USB memory LOAD Loads each settings of the projector from CLONING USB memory Message will be displayed after loading and power will turn off after five min or by pressing gt button A message is displayed for a few seconds if loading fails After saving loading you can remove the USB storage device continued on next page 67 ltem escription O O The following items are exempted OPTION LAMP TIME FILTER TIME SERVICE GHOST NETWORK WIRELESS AND WIRED SETUP IP ADDRESS SUBNET MASK DEFAULT GATEWAY DATE AND TIME MY IMAGE PRESENTATION SECURITY MY TEXT DISPLAY e Operation is not available if SECURITY _ CLONNING LOCK is turned ON e The Screen_MyScreen can only be loaded CLONING load function on STANDBY MODE e While the projector is in STANDBY MODE push the INPUT button of control panel together with gt button and then press A button to start operating the CLONING load function e During loading process the three indicators of control panel POWER orange TEMP LAMP will remain on e After the loading process the three indicators POWER orange TEMP LAMP will turn off Then you can remove the USB storage device e If the loading fails the three indicators POWER orange TEMP LAMP will blink at the same time e CLONING is invalid with the following conditions CLON
112. ns 27 Using the magnify feature 28 Temporarily freezing the screen 29 Temporarily blanking the screen 29 Using the menu function 30 EASY MENU ssssnsnsnnnnnnn 32 Aspect D zoom V Keystone L KEYSTONE PERFECT FIT PICTURE MODE ECO MODE INSTALLATION RESET FILTER TIME LANGUAGE ADVANCED MENU XIT PICTURE menu BRIGHTNESS CONTRAST GAMMA COLOR TEMP COLOR TINT SHARPNESS ACTIVE IRIS My MEMORY IMAGE menu ASPECT OVER SCAN V POSITION H POSITION H PHASE H size AUTO ADJUST EXECUTE INPUT menu PROGRESSIVE VIDEO NR COLOR SPACE VIDEO FORMAT HDMI FORMAT HDMI RANGE COMPUTER IN FRAME LOCK RESOLUTION LL SETUP menu 2 220880n nee 44 D zoom D sHIFT PICTURE POSITION PICT POSIT H KEYSTONE LX KEYSTONE PERFECT FIT AUTO ECO MODE ECO MODE INSTALLATION STANDBY MODE MONITOR OUT AUDIO menu 2208 00 eee 50 VOLUME SPEAKER AUDIO SOURCE Mic LEvEL Mic VOLUME SCREEN menu 2 2 0000008 52 LANGUAGE MENU POSITION BLANK START UP MyScreen MyScreen Lock MESSAGE SOURCE NAME TEMPLATE C c OPTION menu 220 0000 ee 58 AUTO SEARCH DIRECT POWER ON AUTO POWER OFF USB TYPE B LAMP TIME FILTER TIME My BUTTON My SOURCE SERVICE NETWORK menu 2 2000 71 WIRELESS SETUP WIRELESS INFORMATION WIRED SETUP WIRED INFORMATION PROJECTOR NAME My IMAGE AMX D D PRESENTATION SERVICE SECURITY menu 200005 82 SECURITY PASSWORD CHANGE MyScreen PASSWORD PIN L
113. of the Slideshow are saved to the playlist txt file that is stored in the storage media If the file is not existed it is generated automatically e The settings for the START STOP INTERVAL and PLAY MODE are saved to the Playlist e If the storage media is under the write protection or the playlist txt is the read only type file it is impossible to change the settings of the Slideshow 96 PC LESS Presentation continued Playlist The Playlist is a DOS format text file which decides the order of displayed still image files in the Thumbnail or Slideshow The playlist file name is playlist txt and it can be edited on a computer It is created in the folder that contains the selected image files when the PC LESS Presentation is started or the Slideshow is configured Example of playlist txt files START setting STOP setting INTERVAL setting PLAY MODE setting img001 jpo img002 jpg 600 img003 jpg 700 rot1 img004 jpg SKIP img005 jpg 1000 rot2 SKIP The playlist txt file contains the following information Each piece of information requires to be separated by and at the end of each line 1st line START STOP INTERVAL and PLAY MODE settings R496 2nd line and after file name interval time rotation setting and skip setting interval time It can be set from 0 to 999900 ms with an increment of 100 ms rotation setting rot1 means a rotati
114. on peeling paint etc 4 Turn the projector off and unplug the power cord Allow the projector to cool sufficiently 2 After making sure that the projector is cool adequately lightly wipe with gauze or a soft cloth If the projector is extremely dirty dip soft cloth in water or a neutral cleaner diluted in water and wipe lightly after wringing well Then wipe lightly with a soft dry cloth AWARNING P Before caring make sure the power cord is not plugged in and then allow the projector to cool sufficiently The care in a high temperature State of the projector could cause a burn and or malfunction to the projector gt Never try to care for the inside of the projector personally Doing is so dangerous gt Avoid wetting the projector or inserting liquids in the projector It could result in a fire an electric shock and or malfunction to the projector e Do not put anything containing water cleaners or chemicals near the projector e Do not use aerosols or sprays ACAUTION Pp Please take right care of the projector according to the following Incorrect care could cause not only an injury but adverse influence such as discoloration peeling paint etc gt Do not use cleaners or chemicals other than those specified in this manual gt Do not polish or wipe with hard objects NOTICE gt Do not directly touch the lens surface with hands 111 MoublesNooting lf an abnormal operation should occur stop using the proje
115. on at 90 degrees clockwise rot2 and rot3 increase another 90 degrees in order skip setting SKIP means that the image will not be displayed in the Slideshow NOTE The maximum length in a line on the playlist txt file is 255 characters including linefeed If any line exceeds the limit the playlist txt file becomes invalid e Up to 999 files can be registered to the Playlist However if some folders exist in the same directory the limit number is decreased by the number of folders Any files over the limit will not be shown in the Slideshow e If the storage device is protected or does not have sufficient space the playlist txt file cannot be created For the Slideshow settings refer to the section Slideshow mode L195 97 USB Display Windows computer The projector can display images transferred from a computer via an USB cable 410 Hardware and software requirement for computer e OS One of the following 32 bit version only Windows XP Home Edition Professional Edition Windows Vista Home Basic Home Premium Business Ultimate Enterprise Windows 7 Starter Home Basic Home Premium Professional Ultimate Enterprise e CPU Pentium 4 2 8 GHz or higher Graphic card 16 bit XGA or higher e Memory 512 MB or higher e Hard disk space 30 MB or higher e USB Port e USB cable 1 piece Starting USB Display select the USB DISPLAY for the USB TYPE B item in the OPTION
116. onal can be connected to a projector 14 Connecting to a power supply 1 Put the connector of the power cord into the AC IN AC inlet of the projector 2 Firmly plug the power cord s plug into the outlet In a couple of seconds after the power supply connection the POWER y indicator will light up in steady orange 4 AC IN Power cord Please remember that when the DIRECT POWER ON function activated E158 the connection of the power supply make the projector turn on AWARNING PPlease use extra caution when connecting the power cord as incorrect or faulty connections may result in fire and or electrical shock e Do not touch the power cord with a wet hand e Only use the power cord that came with the projector If it is damaged consult your dealer to get a new one Never modify the power cord e Only plug the power cord into an outlet whose voltage is matched to the power cord The power outlet should be close to the projector and easily accessible Remove the power cord for complete separation e Do not distribute the power supply to multiple devices Doing so may overload the outlet and connectors loosen the connection or result in fire electric shock or other accidents Using the security bar and slot Security slot A commercial anti theft chain or wire up to 10 mm in diameter can be attached to the security bar on the projector Also this product has the security slot for the Kensington lock For detai
117. onally e This function is activated only when the projector is working properly This function is not available in any of the following cases While the lamp is warming up The POWER indicator blinks in green When either USB TYPE A or USB TYPE B port is selected While displaying BLANK 29 TEMPLATE L456 or MY IMAGE 0479 screen When any menu is displayed on the screen While using the cursor buttons to operate the sound or screen functions such as adjusting the sound volume correcting the keystone correcting the picture position and magnifying the screen Turning on the power 1 Make sure that the power cord is firmly STANDBY ON button T indicator and correctly connected to the projector ar and the outlet 2 Make sure that the POWER indicator is ad Focus FO steady orange 114 37C 3 Confirm that there is nothing that the lens door hits while opening Press STANDBY ON button on the projector or the remote control The lens door opens the projection lamp lights up and the POWER indicator begins to blink green When the power is completely on the indicator will Stop blinking and light in steady green 01114 To display the picture select an input signal according to the section Selecting an input signal 2122 The INITIAL SETTING Menu will be displayed by factory default upon startup Once the INITIAL SETTING Menu is set it will not appear until F
118. osed Caption is the function to display the dialogue narration and or sound effects of a television program or other C C video sources The Closed Caption availability is depending upon Closed Caption broadcaster and or content MODE Select Closed Caption MODE setting from following options using A V buttons CAPTIONS TEXT CAPTIONS Display Closed Caption TEXT Display Text data which is for additional information such as news reports or a TV program guide The information covers the entire screen Not all of the C C program has Text information CHANNEL select Closed Caption CHANNEL from following options using A V buttons 10220304 Channel 1 primary channel language Channel 2 Channel 3 Channel 4 The channel data may vary depending on the content Some channel might be used for secondary language or empty I I IN o7 PINKO WN MEON From the OPTION menu items shown in the table below can be performed Select an item using the A V cursor buttons and press the gt cursor button or ENTER button to execute the item except for the items LAMP TIME and FILTER TIME Then perform it according to the following table m ADVANCED MENU PICTURE a IMAGE INPUT SETUP P AUDIO O SCREEN Se SELECT AUTO SEARCH OFF DIRECT POWERON OFF AUTO POWER OFF Onin USB DISPLAY Oo t USB TYPE B LAMP TIME FILTER TIME MY BUTTON a MY SOURCE Y SERVICE eo NE
119. ot do anything the dialog will automatically disappear after about ten seconds e The adjustable range of this function will vary among inputs For some input this function may not work well e This function will be unavailable when TRANSITION DETECTOR is on E185 2 Using the magnify feature 1 Press the MAGNIFY ON button on the remote control MAGNIFY The picture will be magnified and the MAGNIFY dialog will ON OFF button appear on the screen When the MAGNIFY ON button is pressed for the first time after the projector is turned on the picture will be zoomed by 1 5 times On the dialog triangle marks to show each direction will be displayed The display magnification of the projector switches in order with every press of the MAGNIFY ON button O For computer signals HDMI RGB signals input signals from the LAN USB TYPE A or USB TYPE B port 1 5 times gt 2 times gt 3 times gt 4 times gt 1 time Eo LLCO Cd O For video signals s video signals component video signals or HDMI Component signals 1 5 times gt 2 times gt 1 time Qe While the triangles are displayed on the dialog use the A W lt gt cursor buttons to shift the magnifying area 28 Press the MAGNIFY OFF button on the remote control to exit magnification The MAGNIFY dialog will automatically disappear in several seconds with no operation The dialog will appear again if the MAGNIFY ON bu
120. ot supported CP A222WN CP A302WN 1024 x 768 Still 768 x 576 Movie CP AW252WN 1280 x 800 Still 768 x 576 Movie Some computers may not support 1280 x 800 e Files with a resolution smaller than 36 x 36 are not supported e Files with a resolution smaller than 100 x 100 may not be displayed e Movie images with a frame rate higher than 15 fps cannot be displayed e Movie images with a bit rate higher than 20 Mbps cannot be displayed e Some supported files may not be displayed e Only a frame appears when the content of image data cannot be displayed in the Thumbnail mode e Even with the file format and audio format combinations described above playback of some files may fail Thumbnail mode The Thumbnail mode displays the images stored in a USB storage device on the Thumbnail screen Maximum 20 images are displayed in a screen If you wish you can jump into the Full Screen mode or Slideshow mode after you select some images in the Thumbnail mode The Thumbnail mode will be started as the primary function of the PC LESS Presentation after selecting the USB TYPE A port as the input source E SS ORFA E EA ay sasoeoimis AE ake Thumbnail menu 13 ieas AI N f t gt A alr s X b A Thumbnail images 89 PC LESS Presentation continued Operating by buttons or keys You can control the images on the Thumbnail screen with the remote control control panel or Web
121. pens the submenu for the setting item you selected Or pressing the lt button instead of the button makes the menu back to the previous one without changing the setup Each submenu can be operated as described above e When COMMUNICATION TYPE E166 is set to OFF the other items in COMMUNICATION menu are invalid e For the function of serial communication refer to the User s Manual Network Guide continued on next page 65 item scription O COMMUNICATION TYPE Select the communication type for transmission via the CONTROL port NETWORK BRIDGE Select this type if it is required to control an external device as a network terminal via this projector from the computer The CONTROL port doesn t accept RS 232C commands MNetwork Bridge Function in the User s Manual Network Guide OFF Select this mode to receive RS 232C commands using the CONTROL port e OFF is selected as the default setting e When you select the NETWORK BRIDGE check the item TRANSMISSTION METHOD below SERIAL SETTINGS Select the serial communication condition for the CONTROL port BAUD RATE 4800bps 9600bps 19200bps 38400bps fl __ SERVICE COMMUNICATION continued continued PARITY NONE ODD amp EVEN _ e The BAUD RATE is fixed to 19200bps and PARITY is fixed NONE when the COMMUNICATION TYPE is set to OFF above TRANSMISSION METHOD select the transmission method for communication by the
122. r buttons ENTER pa button or INPUT button on the remote control control panel or Web Remote Control is pressed or clicked while a movie is playing in the Full Screen mode The following operations are enabled while the remote control icon and progress bar are displayed Button operation The remote Web Remote Functions control Control a A fa BR lay BB Pause toggie mo BFF Fastforward st E REW Fast rewind Control panel ENTER INPUT ENTER Stop Displays Thumbnail PAGE DOWN PAGE DOWN Shows the next file NOTE These operations are not accessible while the projector OSD is displayed e It is not possible to change the input port by using the INPUT button when the Thumbnail screen Slideshow or Full Screen is displayed 94 PC LESS Presentation continued Slideshow mode The Slideshow mode displays images in full screen and switches the images at intervals set in INTERVAL on the Thumbnail screen menu 490 You can start this function from the Slideshow menu To display the Slideshow menu select the SLIDESHOW button in the Thumbnail mode and press the ENTER button on the remote control INPUT button on the control panel or click ENTER on the Web Remote Control While the Slideshow is displayed the following button operations are enabled when still images are displayed and the same button operations in the Full screen mode are enabled when movies are displayed Button operation
123. r updating continued on next page 98 USB Display Windows computer continued This application will appear in the Windows notification area once it starts You can quit the application from your computer by selecting Quit on the menu NOTE The LiveViewer refer to the Network Guide and this application cannot be used at the same time If you connect your computer to the projector by using a USB cable while the LiveViewer is running the following message will be displayed e Depending on the software installed on your computer images on your computer cannot be transferred using LiveViewer Lite for USB e If any application software having the firewall function is installed into your computer make the firwall function invalid with following the user s manual e Some security software may block image transmission Please change the security software setting to allow the use of LiveViewer Lite for USB e When the audio input from USB TYPE B is selected if the sound level is still low even after raising the volume level in the projector to the maximum check whether your computer outputs audio and raise the volume level accordingly e If the computer in use is equipped with HDMI port the audio setting will be changed and sound interruption or noise may occur when the HDMI cable is connected or disconnected during USB Display Restart USB Display for this case e Image distortion or sound inter
124. ruption may occur when LiveViewer is connected to LAN wireless or wired during USB Display The above decline in performance is noticeable especially when multiple computers are connected to LiveViewer 99 USB Display Windows computer continued Right Click menu The menu shown in the right will be displayed Display when you right click the application icon in the Windows notification area uit 300 PM Display The Floating menu is displayed and the icon disappears from the Windows notification area Quit The application is closed and the icon disappears from the Windows notification area NOTE If you wish to restart the application you need to unplug the USB cable and plug it again Floating menu If you select Display on the Right Click menu the Floating menu shown in the right LiveViewer Lite will appear on your computer screen for Start capture button The transmission to the projector is started and the images will be displayed EC Stop button The image transmission is stopped Hold button The image on the projector s screen is temporally frozen The last image before the button is clicked is remained on the screen You can revise the image data on your computer without showing it on the projector s screen Option button The Options window is displayed Minimize button The Floating menu is closed and the icon reappears in the Windows notification ar
125. s and wired LAN to be connected to the same network e Do not set the same network address for both wireless and wired LAN e If you are not utilizing SNTP Date Time Settings in the Network Guide then you must set the DATE AND TIME during the initial installation e The network communication control is disabled while the projector is in standby mode if the STANDBY MODE item of SETUP menu is set to SAVING Please connect the network communication to the projector after setting the STANDBY MODE to NORMAL E2148 item scription O Selecting this item displays the WIRELESS i SETUP menu for the wireless LAN i DHCP IP ADDRESS Use the A V buttons to select an item gt SUBNET MASK i gt DEFAULT GATEWAY and the gt or ENTER button on the remote i DNS SERVER gt TIME DIFFERENCE control to perform the item BATE AND TIME w ENCRYPTION t3 SSID J RETURN Use the A V buttons to select the mode of the WIRELESS network communication system Select according SETUP to the settings of your computer ADHOC INFRASTRUCTURE To save the setting press the gt button e When ADHOC is selected IEEE802 11 n cannot be used lf ADHOC Is set to MODE while one of WPA PSK or WPA2 PSK is selected in ENCRYPTION the ENCRYPTION 173 setting switches to OFF automatically continued on next page 71 item scription O Use the A V buttons to turn DHCP on off ON OFF Select OFF when the network does not
126. s not available 113 Regarding the indicator lamps When operation of the LAMP TEMP and POWER indicators differs from usual check and cope with it according to the following table POWER LAMP TEMP Describtion indicator indicator indicator p Lighting Turned Turned The projector is in a standby state In Orange off off Please refer to the section Power on off Blinking Turned Turned The projector is warming up In Green off off Please wait Lighting Turned Turned The projector is in an on state In Green off off Ordinary operations may be performed Blinking Turned Turned The projector is cooling down In Orange off off Please wait The projector is cooling down A certain error has been detected Please wait until POWER indicator finishes blinking and then perform the proper measure using the item descriptions below The lamp does not light and there is a possibility that interior portion has become heated Please turn the power off and allow the projector to cool down at least 20 minutes After the projector has sufficiently cooled down please make confirmation of Lighting the following items and then turn the power on again In Red e Is there blockage of the air passage aperture e Is the air filter dirty e Does the peripheral temperature exceed 40 C If the same indication is displayed after the remedy please change the lamp referring to the section Replacing the lamp
127. stom resolution use the A V buttons to select the CUSTOM and the RESOLUTION CUSTOM box will be RESOLUTION displayed Set the horizontal HORZ and E vertical VERT resolutions using lig RESOLUTION_CUSTOM the A gt buttons HORZ VERD This function may not support all _GANGEL _J Oe 2x0T 44 resolutions 5 Move the cursor to OK on screen and press the gt or ENTER button The message ARE YOU SURE YOU WISH TO CHANGE RESOLUTION appears To save the setting press the gt button The horizontal and vertical positions clock phase and horizontal size will be automatically adjusted yer The INPUT_INFORMATION dialog ee will be displayed 6 To revert back to the previous resolution without saving changes move the cursor to CANCEL on screen and press the lt or ENTER button The screen will then return to the RESOLUTION menu displaying the previous resolution e For some pictures this function may not work well 43 SSOR Taney m ADVANCED MENU Si SELECT From the SETUP menu items shown in the table PICTURE DZO 256 100 0 below can be performed a Neut 2 PICTURE POSITION MD Select an item using the A cursor buttons and pano Ee press the gt cursor button or ENTER button to lo execute the item Then perform it according to the Scasyuey Pome pa area EXIT a1 MONITOR OUT following table COMPUTERIN1 1024 x 768 60Hz item i escription Using the lt gt cursor buttons adjusts the m
128. te SAVE then LOAD by going through the procedure File name of USB memory doesn t match nabetoload Please assign pj_data bin for setting data and for the CLONING MyScreen pj_logo bmp or pj_logo gif saved data STANDBY mode is set to SAVING Switch the SAVING to NORMAL in STANDBY MODE under SET UP menu beforehand to load the CLONING data using control panel on the projector while the lamp is in standby state 6 7 69 NOTE Although bright spots or dark spots may appear on the screen this is a unique characteristic of liquid crystal displays and it does not constitute or imply a machine defect 122 Specifications Please see the Specifications in the User s Manual concise which is a book End User License Agreement for the Projector Software e Software in the projector consists of the plural number of independent software modules and there exist our copyright or and third party copyrights for each of such software modules e Be sure to read End User License Agreement for the Projector Software which is separated document in the CD 123
129. th from the newer Before replacing the lamp turn the projector off and unplug the power outlet Cord then wait at least 45 minutes for the lamp to cool sufficiently Handling the lamp while hot can cause burns as well as damaging the lamp e Never unscrew except the appointed marked by an arrow screws e Do not open the lamp cover while the projector is mounted on a wall or ceiling This is dangerous since if the lamp s bulb has broken the shards will fall out when the cover is opened In addition working in high places is dangerous so ask your local dealer to have the lamp replaced even if the bulb is not broken e Do not use the projector with the lamp cover removed At the lamp replacing make sure that the screws are screwed in firmly Loose screws could result in damage or injury e Use only the lamp of the specified type Use of a lamp that does not meet the lamp specifications for this model could cause a fire damage or shorten the life of this product e If the lamp breaks soon after the first time it is used it is possible that there are electrical problems elsewhere besides the lamp If this happens consult your local dealer or a service representative e Handle with care jolting or scratching could cause the lamp bulb to burst during use e Using the lamp for long periods of time could cause it dark not to light up or to burst When the pictures appear dark or when the color tone is poor please replace the lamp
130. than X is selected for STANDBY in the AUDIO SOURCE item of the AUDIO menu E4150 NORMAL is selected in the STANDBY MODE item of the SETUP menu 448 e In the standby mode the volume of the microphone is adjustable with the VOLUME buttons on the remote control in synchronization with the volume of the projector 12 Temporarily muting the sound MUTE button 1 _ Press MUTE button on the remote control A dialog will appear on the screen indicating that you have muted the sound To restore the sound press the MUTE VOLUME or VOLUME button Even if you do not do anything the dialog will automatically disappear after about ten seconds e When X is selected for current picture input port the sound is always muted Please see AUDIO SOURCE item of AUDIO menu 4150 e C C Closed Caption is automatically activated when sound is muted and an input signal containing C C is received This function is available only when the signal is NTSC for VIDEO or S VIDEO or 480i 60 for COMPUTER IN1 or COMPUTER IN2 and when AUTO is selected for DISPLAY in the C C menu under the SCREEN menu 457 Selecting an input signal INPUT button q Press INPUT button on the projector pu XS ee Each time you press the button the projector oo KG switches its input port from the current port as below C m gt COMPUTER IN1 gt COMPUTER IN2 i VIDEO LAN a M Vv S VIDEO USB TYPE A HDMI lt U
131. the following items then press gt or ENTER button to use the function e To use Network Presentation an exclusive application LiveViewer is required It can be installed from the bundled application CD You can also download the latest version and relevant information from the Hitachi website http www hitachi america us digitalmedia or http www hitachidigitalmedia com For details of Network Presentation and instructions to install the LiveViewer refer to the manual for LiveViewer If you set a computer to the Presenter mode while its image is projected the projector is occupied by the computer and access from any other computer is blocked Use this function to quit the Presenter mode and allow other computers to access the projector select this item to display a dialog Press button to choose OK in the dialog The Presenter mode is cancelled and a message is displayed indicating the result e To make Presenter mode setting use LiveViewer For details refer to the manual for LiveViewer QUIT PRESENTER MODE If you set one or more computers to the Multi PC mode on LiveViewer and send their images to the projector you can select the display mode on the projector from two options below Single PC mode displays the image of the selected computer on full screen Multi PC mode displays the images sent from up to four computers on screen that is divided into quarter sections MULTI PC Sele
132. the sound on off The image quality may deteriorate when you play back audio data transferred together with the image data To give priority to the image quality turn off the sound by selecting the checkbox Display LiveViewer Lite for USB If you want to display the LiveViewer Lite for USB application window on the screen please check the box About The version information of the LiveViewer Lite for USB Image quality Keep PC resolution Sound Display Live viewerLite For USB Clase NOTE When the resolution is changed the arrangement of icons on computer desktop screen may be changed If one of the AUDIO IN ports is selected or X is selected for USB TYPE B in AUDIO SOURCE of the AUDIO menu 150 audio sound operation in the Options window will be disabled USB Display Mac computer The projector can display images transferred from a computer via an USB cable 10 Hardware and software requirement for computer e OS Mac OSX 10 5 Intel Mac OSX 10 6 Intel Mac OSX 10 7 Intel This application is not compatible with Power PC Graphic card 16 bit XGA or higher e Memory 512 MB or higher e Hard disk space 30 MB or higher Starting USB Display select the USB DISPLAY for the USB TYPE B item in the OPTION menu When you connect your computer to the USB TYPE B port on the projector using a USB cable the projector will be recognized as a CD ROM drive on your computer Double click the CD ROM then
133. ton on the remote control while no menu is on screen to display the D SHIFT L144 dialog on screen 2 Use the A VY lt and gt buttons to adjust the picture position Press the POSITION button again to finish this operation POSITION button e This is a function to shift the position of the shrunken picture by the D ZOOM 444 function e When an OSD On Screen Display menu is displayed this operation moves the position of the OSD menu but not the position of the picture HLJ371 e The D SHIFT adjustment values are not valid when the D ZOOM is set to 256 full screen CP A222WN CP A302WN e The D SHIFT adjustment values are not valid when the D ZOOM is set to 320 full screen CP AW252WN Correcting the keystone distortions KEYSTONE button 4 Press KEYSTONE button on the remote aoe control A dialog will appear on the screen Ye PERFECT FIT EXIT to aid you in correcting the distortion 2 Use the A V cursor buttons to select MANUAL or PERFECT FIT operation and press the gt button to perform the following 1 MANUAL displays a dialog for keystone correction ee Use the A buttons to select KEYSTONE KEYSTONE then use the lt gt buttons for TE adjustment Ex 2 PERFECT FIT displays a dialog for adjusting the shape of the projected image in each of the corners and sides To close the dialog and complete this operation press KEYSTONE button again Even if you do n
134. tton is pressed when the dialog has automatically disappeared The magnification is automatically disabled when the displaying signal or its display condition is changed While the magnification is active the keystone distortion condition may vary It will be restored when the magnification is disabled some horizontal stripes might be visible on the image while magnification is active This function is not available in the following cases Async signal in the range not supported is input There is no input signal Temporarily freezing the screen 4 Press the FREEZE button on the remote control ee DUKON The FREEZE indication will appear on the screen however the indication will not appear when the OFF is selected for the MESSAGE item in the SCREEN menu 454 and the projector will go into the FREEZE mode which the picture is frozen To exit the FREEZE mode and restore the screen to normal press the FREEZE button again e The projector automatically exits from the FREEZE mode when some control buttons are pressed e f the projector continues projecting a still image for a long time the LCD panel might possibly be burned in Do not leave the projector in the FREEZE mode for too long e Images might appear degraded when this function is operated but it is not a malfunction Temporarily blanking the screen 1 Press BLANK button on the remote control PEARS ounce The BLANK screen wil
135. unction works only for a video signal s video signal compo nent video signal of 480i 60 or 576i 50 or 1080i 50 60 and an HDMI signal of 480i 60 or 576i 50 or 1080i 50 60 Using the A V buttons switches the mode for color space AUTO RGB SMPTE240 REC 09 REC601 Ss Se e This item can be selected only for a computer signal component COLOR SPACE video signal except for signals from the LAN USB TYPE A and USB TYPE B ports or an HDMI signal e The AUTO mode automatically selects the optimum mode e The AUTO operation may not work well at some signals In such a case it might be good to select a suitable mode except AUTO continued on next page 40 item scription O O The video format for S VIDEO port and VIDEO port can be set 1 Use the A V buttons to select the input port VIDEO FORMAT 2 Using the lt gt buttons ee ee a ee switches the mode for video WO E a format VIDEO FORMAT AUTO amp NTSC amp PAL SECAM tS N PAL amp M PAL NTSC4 43 lt e This item is performed only for a video signal from the VIDEO port or the S VIDEO port e The AUTO mode automatically selects the optimum mode e The AUTO operation may not work well for some signals If the picture becomes unstable e g an irregular picture lack of color please select the mode according to the input signal Using the A V cursor buttons switches the video format for an input from the HDMI port AUTO VIDEO
136. vailable for a signal from the LAN USB TYPE A USB TYPE B or HDMI port e When this adjustment is excessive the picture may not be displayed correctly In such a case please reset the adjustment by pressing the RESET button on the remote control during this operation e Images might appear degraded when this function is operated but it is not a malfunction selecting this item performs the automatic adjustment feature For a computer signal The vertical position the horizontal position and the horizontal phase will be automatically adjusted Make sure that the application window is set to its maximum size prior to attempting to use this feature A dark picture may still be incorrectly adjusted Use a bright picture when adjusting For a video signal and s video signal The video format best suited for the respective input signal will be selected automatically This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu 441 The vertical position and horizontal position will be automatically set to the default AUTO ADJUST For a component video signal CAEU AEE The vertical position and horizontal position will be automatically set to the default The horizontal phase will be automatically adjusted e he automatic adjustment operation requires approx 10 seconds Also please note that it may not function correctly with some input e When this function is performed for a video signal a certa
137. wer Lite for USB e When the audio input from USB TYPE B is selected if the sound level is still low even after raising the volume level in the projector to the maximum check whether your computer outputs audio and raise the volume level accordingly e If the computer in use is equipped with HDMI port the audio setting will be changed and sound interruption or noise may occur when the HDMI cable is connected or disconnected during USB Display Restart USB Display for this case e Image distortion or sound interruption may occur when LiveViewer is connected to LAN wireless or wired during USB Display The above decline in performance is noticeable especially when multiple computers are connected to LiveViewer 103 USB Display Mac computer continued Menu 6 C kas pe Display Options Hide m lt gt 0 o If you select Display on the Right Click menu the Floating menu shown in the right will appear on your computer screen Start capture button The transmission to the projector is started and the images will be displayed Stop button The image transmission is stopped Hold button The image on the projector s screen is temporally frozen The last image before the button is clicked is remained on the screen You can revise the image data on your computer without showing it on the projector s screen Option button The Options window is displayed Minimize button
138. will return to MyScreen PASSWORD on off menu PASSWORD When a password is set for MyScreen e The MyScreen registration function and menu will be unavailable e The MyScreen Lock menu will be unavailable e The START UP setting will be locked on MyScreen and the menu will be unavailable Turning the MyScreen PASSWORD off will allow normal operation of these functions e Please do not forget your MyScreen PASSWORD 2 Turning off the MyScreen PASSWORD 2 1 Follow the procedure in 1 1 to display the MyScreen PASSWORD on off E MyScreen PASSWORD NOTE NEW PASSWORD oo00 menu A MyScreen PASSWORD 2 2 Select OFF to display the ENTER a aes PASSWORD box large Enter the registered RARER Soe Sie a password and the screen will return to the Pe oe MyScreen PASSWORD on off menu ENTER ie wae box If an incorrect PASSWORD is input the menu will close If necessary repeat the process from 2 1 3 If you have forgotten your password 3 1 Follow the procedure in 1 1 to display the MyScreen PASSWORD on off menu 3 2 Select OFF to display the ENTER PASSWORD box large The 10 digit Inquiring Code will be displayed inside the box 3 3 Contact your dealer with the 10 digit Inquiring Code Your password will be sent after your user registration information is confirmed continued on next page 83 item scription O PIN LOCK is a function which prevents the projector from being used unless a registered Code is input
139. y changing The indication of the PICTURE MODE displayed by changing The indication of the ACTIVE IRIS displayed by changing The indication of the MY MEMORY displayed by changing The indication of FREEZE and Il while freezing the screen by pressing the FREEZE button The indication of the TEMPLATE displayed by changing The indication of the ECO MODE displayed by changing The indication of FOCUS displayed by changing The D ZOOM dialog displayed by changing e When the OFF is selected please remember if the picture is frozen Do not mistake freezing for a malfunction 129 continued on next page 04 item iesription O O Each input port for this projector can have a name applied to it 1 Use the A V buttons on the SCREEN menu to select SOURCE NAME and press the or ENTER button The SOURCE NAME menu will be displayed 2 Use the A V buttons on the SOURCE OENE z NAME menu to select the port to be orr named and press the gt button The aa A LAN SOURCE NAME dialog will be displayed Foo a HDMI Right side of the menu is blank until a S VIDEO re VIDEO name is specified RETURN 3 Select an icon you would like to assign to SOURCE NAME the port in the SOURCE NAME dialog The name assigned to the port will also be automatically switched according to your icon selection Press the ENTER or INPUT button to determine your icon selection 4 Select a number you would like to assign to the
140. your computer does not support the display resolution specified above a smaller resolution that is the largest among the resolutions that are supported by the computer will be selected Sound Turns the sound on off The image quality may deteriorate when you play back audio data transferred together with the image data To give priority to the image quality turn off the sound by selecting the checkbox About The version information of the LiveViewer Lite for USB NOTE When the resolution is changed the arrangement of icons on computer desktop screen may be changed e If one of the AUDIO IN ports is selected or X is selected for USB TYPE B in AUDIO SOURCE of the AUDIO menu 150 audio sound operation in the Options window will be disabled 105 MEIMEI Replacing the lamp A lamp has finite product life Using the lamp for long periods of time could cause the pictures darker or the color tone poor Note that each lamp has a different lifetime and some may burst or burn out soon after you start using them Preparation of a new lamp and early replacement are recommended To prepare a new lamp make contact with your dealer and tell the lamp type number Type number DT01381 lamp cover Replacing the lamp 1 Turn the projector off and unplug the power cord Allow the projector to cool for at least 45 minutes 2 Prepare a new lamp If the projector is mounted on a ceiling or if the lamp has broken also ask the

User`s Manual

Contents

Download Pdf Manuals

Related Search

Related Contents