XLED 336 BEAM
Contents
1. Software version display Modular structure for easy maintenance HOUSING High temperature engineering plastic IP20 WEIGHT 4 2Kg SIZES See at below 12 16 17 ge 32 16 ou 223 88 149 99 160 76 244 36 a i ES 130 a T LIGHT OUTPUT WITHOUT FROST BOARD 17 lux RGB 4807 1202 534 300 192 134 17 lux R 855 214 95 53 34 24 17 lux G 2381 595 265 149 95 66 17 lux B 1755 439 195 110 70 49 7m DISTANCE m Om 5m 10m 15m 20m 25m 30m 17 DIAMETER m 0 0 149 2 98 6446 5 95 7 44 8 93 13 16 LIGHT OUTPUT WITH FROST BOARD ILLUMINATION lux 0 1005 251 112 63 40 28 6m 5m 4m 3m 2m ai LA 32 1m 2m 3m 4m 5m 6m 7m DISTANCE m 0 5m 10m 15m 20m 25m 30m DIAMETER m 0 2 88 5 76 8 64 11 52 14 40 17 27 COMPONENT ORDER CODES NAME PART NO QUANTITY REMARK POWER SUPPLY 192010150 1PCS 90 264V AC 3 0A LED RED COLOR 150020217 12 PCS 3Wx12 LED BLUE COLOR 150020218 12 PCS 3Wx12 LED GREEN COLOR 150020219 12 PCS 3Wx12 LENS 070070011 1PCS FUSE 270041037 1 PCS 5x20 3 15A TILT PAN BELT 290151337 2PCS HTD 3M 297 FAN 030060069 1 PCS 24V ME70202VI FAN 030060070 1PCS 24V AD0424HB PAN TILT MOTOR 030040170 2PCS LED DRIVER PCB 230060106 1PCS LED PCB 230060107 1 PCS PAN AND TILT PCB 23006012. XLED 336 BEAM PR 8110 This product manual contains important information about the safe installation and use of this product Please read and follow these instructions carefully before installing and using the product and keep this manual in a safe place for future reference PR LIGHTING LTD http www pr lighting com INDEX SAFETY INFORMATION AND WARNINGS PRODUCT INSTALLATION POWER SUPPLY CONNECTION DMX CONTROL CONNECTION DMX TERMINATOR PRODUCT FUNCTION SETUP DMX START ADDRESS SETUP STAND ALONE MODE MASTER SLAVE MODE OPERATION MENU DMX PROTOCOL DISPLAY INFORMATION MAINTENANCE PRODUCT CLEANING TROUBLESHOOTING TECHNICAL DATA COMPONENT ORDER CODES CIRCUIT DIAGRAM NN DDO TON HW ann o Every ex company fixture is tested completely and packed properly by the manufacturer The use explanations and warnings in this manual must be strictly followed Any damage caused by improper use will not be covered by the manufacturer and or dealer If any technical data changes further notice won t be offered ACCESSORIES These items are packed together with the product please check them Name Quantity Unit Remark XLR signal cable 1 PCS With plug and socket Safety cord 1 PCS This manual 1 PCS G clamp 1 PCS Standard Q clamp 1 PCS Optional FROST BOARD 1 PCS 2 16 SAFETY INFORMATION AND WARNINGS After receiving product please unpack
3. with each core having at least a 0 5mm diameter Connection to the DMX512 input and output ports of the unit is via 5 pin XLR plugs and sockets which are included with the unit The XLR s plugs and sockets are connected with wires as shown in the figure above Note care should be taken to ensure that none of the pins touch the metallic body of the plug or each other XLR s plug and socket must not be connected with XLR control wire in any way other than shown as above The fixture accepts digital control signals in protocol DMX512 1990 Connect the controller s output to the first fixture s input and connect the first fixture s output to the second fixture s input and connect the rest fixtures in the same way Eventually connect the last fixture s output to a DMX terminator as shown in the figure below MASTER SLAVE SLAVE gra AT DMX IN FROM SEN 3 CONTROLLER DMX OUT DMX OUT TERMINATOR 5 16 DMX TERMINATOR In the Controller mode at the last fixture in the chain the DMX output has to be connected with a DMX terminator This prevents electrical noise from disturbing and corrupting the DMX512 control signals The DMX terminator is simply a Canon connector with a 120Q ohm resistor connected across pins 2 and 3 which is then plugged into the output socket on the last fixture in the chain The connections are illustrated below DMX TERMINATOR CONNECTION Connect a 1
4. and check if there are any damages caused by transportation Do not use the fixture if transportation damages occur and contact the manufacturer or the dealer as soon as possible The product is only for indoor use IP20 Use only in dry locations Keep this device away from rain and moisture excessive heat humidity and dust Do not allow its contact with water or any other liquids The unit is only intended for installation operation and maintenance by qualified personnel The product must be installed in a location with good ventilation at least 50cm from adjacent wall surfaces Be sure that no fans and ventilation slots are blocked Do not project the beam onto inflammable surfaces minimum distance is 1 3m I 1 3m E Avoid looking into the light from the fixture directly especially to Epileptic Patients The light is harmful to the eye Do not attempt to dismantle and or modify the product in any way Electrical connection must only be carried out by qualified personnel Before installation ensure that the voltage and frequency of power supply match the power requirements of the fixture It is essential that each fixture is correctly earthed and that electrical installation conforms to all relevant standards Do not connect this device to any other types of dimmer apparatus Make sure that the power cord is never crimped or damaged by sharp edges Never let the power cord come into contact with other cables If the fixture is not in
5. 16 1 PCS DISPLAY PCB 230060117 1 PCS FROST BOARD 120110365 1 PCS 14 16 CIRCUIT DIAGRAM 15 16 PR LIGHTING LTD 1582 Xingye Avenue Nancun Panyu Guangzhou 511442 China TEL 86 20 3995 2888 FAX 86 20 3995 2330 P N 320020062 Version 20120425 Preliminary 16 16
6. 20 OHM resistor across pins 2 and 3 in an XLR plug and insert into the DMX out socket on the last unit in the chain PIN 2 PIN 3 PRODUCT FUNCTION SETUP BEBE OOOO FUNC DOWN ENTER Fixture s address and function code configuration can be set conveniently via button switch and LCD display Press button ENTER more than 5 seconds to unlock panel LED display shows the fixture s function menu Each Option of the main menu has its own sub menu Each menu stands for specified function of the fixture please see the details in the following Press button UP or DOWN if you want to set or browse through the various Setup Options Press button ENTER to save your settings or enter the sub menus Press button UP or DOWN to change the parameters increase or decrease the numbers Press button FUNC it will return to the upper menu one by one If the button not pressed the system will go back to display status automatically TO SET THE DMX START ADDRESS If many fixtures are controlled by the controller each fixture should be set with a start address to receive signals sent by the controller and respond to it The fixture have 2 DMX modes There are standard mode and extended mode For example standard mode has 12 channels so set the No 1 Fixture s address 001 No 2 Fixture s address 013 No 3 Fixture s address 025 and so on Switch on the Fixture Press button ENTER more than 5 seconds to unlock panel Press button F
7. UNC to display DMX address Press button U and DOWN you can set the address Press button ENTER to confirm when powered on next time it will show the latest number you saved Press button FUNC it will return to the upper menu one by one 6 16 STAND ALONE MODE Operate the fixture without connecting a controller enable the master mode in the operation panel the fixture will run in Stand Alone mode automatically MASTER SLAVE MODE If many fixtures are connected under Master Slave mode use XLR XLR control cable to connect the first fixture s DMX output port with the second fixture s DMX input port then to connect the second fixture s output port with the third fixture s input port and so on until all the fixtures are connected the last thing is to plug the terminator at the last fixture s output port In this case the first fixture is the master others are slaves Set the master s address at 001 Master can be set at any mode STD mode or extended mode and slave should be set at same mode as the master s After powered on the group will run under Master Slave mode MASTER DMX IN FROM CONTROLLER DMX OUT DMX OUT TERMINATOR 7 16 OPERATION MENU 1st LEVEL 2nd LEVEL 3rd LEVEL 4th LEVEL AddR XX
8. X DMX Address XXX 1 512 STd Tike de Standard mode Defaultis STd EXT Extended mode dISP ON Display settings OFF Default is ON digital CRT off if buttons not pressed in 5 minutes OFF xyCH Pan Tilt Swap off Pan Tilt Swap Default is OFF ON CNFG Pan Tilt Swap on Config Settings OFF xyCP Pan Tilt Invert off Pan Tilt Invert Default is OFF ON Pan Tilt Invert on SLAV mORS Master Slave Settings eee re Default is slave mAST Master Mode FACT Factory Defaults yES TRmd 1 Transmit parameters yES TImE XXXX INFO Fixture usage time Fixture usage time showed Information VER X X X Software version Software Version No TEmP X X LED lamp PCB temp showed OFF shut off R red G Green TEST test mode B Blue Lamp LED Lamp RG Yellow GB cyan RB purple RGB White Pan 0 255 540 TILT 0 255 270 8 16 P TS Pan Tilt speed 0 255 Pan Tilt speed RESE Reset YES dmx DMX mode PRUN Run preset memory ERUN Run user program CHO1 Strobe 0 255 CHO2 Red Dimming 0 255 Bon Mo CH03 Operation Mode Greening Dimming 0 255 CHO4 Lan Blue Dimming 0 255 User memory from ET 01 to ET16 CH05 Pan 0 255 CH06 Tilt 0 255 CHO7 Pan Tilt Speed 0 255 CH15 0 255 Scene hold time Time X 40mS Remark 1 Inthe synchronous control of multiple fixtures parameters can be transmitted from the master includes DMX mode display setting operation mode Including user m
9. e Off When setting slave mode Parameters that LED digital tubes display Flash Parameters not saved press ENTER to save them MAINTENANCE If the Fixture does not function check if the fuses on the power socket of the unit is broken or not if broken they should only be replaced by fuses of the same specification Should there be damaged call a qualified technician before replacement The fixture has thermal protection device that will switch off the unit in case of overheating Should any case like this happen check if the fans work well or fans and fan screens are blocked restart the fixture before the problems have been found and resolved Any maintenance work should only be carried out by qualified technicians 10 16 PRODUCT CLEANING To ensure the reliability of the fixture it should be kept clean It is recommended that the fans should be cleaned every 15 days The lens should also be regularly cleaned to maintain an optimum light output Do NOT use any type of solvent containing chemical elements Cleaning intervals depends on the environment in which the fixture operates and use frequency A soft cloth and typical glass cleaning products should be used in cleaning the fixtures It is recommended to clean the external optical system at least once every 20 days Do not use any organic solvent e g alcohol to clean the housing of the apparatus to avoid damages TROUBLE SHOOTING PROBLEM ACTION gt Check if th
10. e fuse on the power socket is broken or not The fixture can not start gt Check the status of the fuse The lamp works normal but the fixture gt Check if the fixture s start address is set properly doesn t respond to the controller gt Check if XLR signal cable is broken or not d A A gt Make sure the fans work normally and if dirt blocks fans and fan The fixture only functions intermittently screens The beam appears dim and brightness gt Check if the lamps reach the end of their lives decreases apparently gt Check if external and internal optical systems are clean or not TECHNICAL DATA LIGHT SOURCE OSRAM OSLON 3W 12R 12G 12B VOLTAGES 90 264VAC 50 60HZ POWER CONSUMPTION 140W 220V COLOR SYSTEM RGB color mixing system 2700K 10000K 11 16 DIMMER 0 100 linearly adjustable STROBE Electronic strobe 0 3 20 F P S HEAD MOVEMENT Pan 540 Tilt 270 Pan Tilt Swap and Invert Function LENSANGLE 8 FIELD ANGLE Without Frost board One tenth peak luminance angle BEAM ANGLE Without Frost board Half peak luminance angle FIELD ANGLE With Frost board One tenth peak luminance angle BEAM ANGLE With Frost board Half peak luminance angle CONTROL DMX512 5 pin interfaces 12channels in standard mode and 16channels in extended mode Master slave mode Stand alone mode Built in mode OTHER FUNCTIONS Adjustable Pan amp Tilt speed Fixture usage time display
11. emory DMX Protocol Standard Extended w Function DMX Value Description Mode Mode 1 1 Dimmer 000 255 Linear dimming from dark to bright Dimmer SEA 2 16 Bit 000 255 Linear dimming from dark to bright i 0 Nil 001 031 Red 032 063 Green 2 3 064 095 Blue Macro 096 127 Yellow 128 159 Cyan 160 191 Purple 9 16 192 223 White 224 255 Red amp White 3 4 Red 000 255 Linear dimming from dark to bright 4 5 Green 000 255 Linear dimming from dark to bright 5 6 Blue 000 255 Linear dimming from dark to bright 7 Hue 000 255 Hue Options 8 Saturation 000 255 Saturation from light to dark 9 Brightness 000 255 From Dark to Bright 0 Nil 6 10 Strobe 001 255 Strobe speed from slow to fast 7 11 000 255 Pan 540 Pan 8 12 000 255 Pan 16 bit Precision Rotation Pan 16 Bit 9 13 000 255 Tit 270 Tilt 10 14 Tilt 16 Bit 000 255 ai a Tilt 16 Bit precision rotation Pan Tilt 11 15 000 255 From slow to fast Speed 000 048 Reserved 12 16 Control 049 255 Reset INDICATION OF LED DIGITAL TUBE A A Se On DMX signal OK Decimal point of the first digital tube Off No DMX signal A eee On Master slave signal is OK Decimal point of the third digital tube Off No master slave signal A l a On When setting master mode Decimal point of the fourth digital tub
12. the package and mount 1 clamp on the BOTTOM of fixture with 2 retainers attached to the clamp Hang the fixture on the steel truss and fasten the retainers attached to the clamp Always ensure that the location that you are going to mount the unit is secure and is strong enough to support the weight of the unit See the WARNING as shown above To pass SAFETY CORD through the SAFETY HOLE on the back cover of the base of the fixture for safety Always ensure that the unit is firmly anchored to avoid vibration and slipping whilst functioning WARNING 1 The unit MUST be lifted or carried by the HANDLES instead of clamps 2 For safety the safety cord should bear 10 times of the unit s weight 4 16 POWER SUPPLY CONNECTIONS Connect the power cord as follows L live brown E earth yellow green N neutral blue Please be advised to notice power supply s voltage and frequency meet what are described on the nameplate of the product It is recommended that each unit be power connected separately so that they may be individually switched on and off IMPORTANT It is essential that each unit yellow green twin wire is correctly earthed and the electrical installation conforms to all relevant standards DMX CONTROL CONNECTION DMX OUT DMX IN DMX 512 FUNCTION 5 PIN 5 l o o l 3 DATA 0 09 0 0 4 3 3 Connection between controller and unit and between one unit and another must be made with a 2 core screened cable
13. use or before it being cleaned please hold the plug and unplug the power cord Never pull out the plug by tugging the power cord The fixture should always be installed with a secondary safety fixing A safety cord is supplied for this it should be attached as shown in installing the unit section At the back cover of the base there is a safety hole for the safety cord for safety installation please run the safety cord supplied with the fixture through the safety hole to support the safe installation Shields and lens shall be changed if they have become visibly damaged to such an extent than their effectiveness is impaired for example by cracks or deep scratches SO Exterior surface temperatures of the luminaire after 5 minutes operation is 45 C when steady it achieves 50 C There is no user repairable parts inside the fixture do not open the housing and never operate the unit with the covers removed Before the use of the fixture please check if the covers are fixed well and all screws are fastened If any questions don t hesitate to consult your dealer or the manufacturer Important Always disconnect from Power Supply when the device is not in use or before cleaning or any maintenance work 3 16 PRODUCT INSTALLATION SAFETY CORD CONTROL PANEL WARNING Please run the safety cord through safety hole and make sure that the cord is property secured Take 1 clamp and 1 the safety cord out from
Download Pdf Manuals
Related Search