PROTECT 1206i - DigiScan Labs
Contents
1. Detector of bugs and digital transmissions The Protect 1206i is a new class of counter surveillance device Unlike all typical searching devices it can detect modern hidden bugs which use such protocols as Bluetooth and Wi Fi at a long distance Such bugs especially Bluetooth types are practically undetectable by common RF detectors due to their very low transmitted power and special type of modulation The Protect 1206i uses a separate channel with a high 2 4 5 GHz frequency pre selector to detect and locate Bluetooth and Wi Fi with a much higher sensitivity The unit also then processes the demodulated signal in order to identify which protocol has been detected In addition the unit can detect all classical bugs and inspect them for the presence of correlation by sending sound impulses as well as other digital transmissions at a standard distance GSM 3G DECT etc The unit which you have selected is not a slightly improved version of the old device but a completely new revolutionarily changed sweeping tool New features wv e New wide band antenna for ANT1 socket Wider coverage particularly at lower frequencies has made it possible to increase the detection distance of a conventional VHF UHF bug by 2 3 times while saving perfect sensitivity at the higher bands GSM Wi fi Bluetooth etc New Micro Pointer microwave antenna for ANT1 ANT2 socket This is the first time when an affordable RF detector gets the2. 4 9 5 875 GHz Power Two AAA batteries 2xLR 03 A 5 With out antennas 120x70x16 mm De rSIObs With antennas 210x70x16 mm Current consumption Up to 30 mA Operation duration Up to 20 hours Indications Active antenna Low battery Mode Identification Attenuator Secondary demodulation Micro Pointer Antenna Frequency range 2 12 GHz Type Log periodic array Model name LPDA 12 Dimensions 53 x 84 x 9 mm Connector SMA Male Wi Fi 2 4 GHz Wi Fi 5 GHz Sensitivity 3 4 5 Frequency 6GHz Sensitivity graph of the Protect 1206i Supplied set wv The new Protect 1206i comes with the following accessories 1 x Micro Pointer antenna 1 x Rod 2 x LRO3 AAA antenna batteries 1 x User s Manual Description of controls w Use the POWER switch 7 to turn the device on and off The IDENTIFICATION LED 5 of the Protect 1206i changes color depending on the detected protocol BLUE BLUETOOTH E GREEN Wi Fi RED GSM900 1800 ORANGE DECT Micro Pointer Microwave Antenna Frequency range 2 12 GHz Type Log periodic array Model name LPDA 12 IDENTIFICATION DETECTS BUGGING DEVICES Fal The Protect 1206i has two separate RF channels which work with the two corres ponding antennas The ANT1 channel 1 is used for the detection of the wide frequency range 50 6000MHz in order to perform searches for all types of transmit ters including room car
3. a distance 20 50 cm There is a difference between the use of the Micro Pointer antenna on the ANT1 and ANT2 The ANT2 channel was created for the detection of Wi Fi and Bluetooth only It is more sensitive to the above mentioned signals and is not capable of detecting any other signals The Micro Pointer antenna in the ANT2 will increase the sensitivity but the device will still be able to detect Wi Fi and Bluetooth only The ANT1 has a continuous coverage of 50 6000MHz and with the Micro Pointer antenna plugged into it there will be an increase in sensitivity to all high frequency signals not only to Wi Fi and Bluetooth Do not forget to return the antennas to their initial state after completing the work rod antenna to ANT1 Micro Pointer to ANT2 Checking telephone lines Telephone bugs may be installed anywhere a phone line lays It may be within the phone set the phone outlet connecting box or cable Most telephone bugs activate only when the receiver is off the hook Therefore the sweeping of phone lines should be carried out only when the receiver is in this state You should apply the rod antenna on ANT1 although the procedure can be repeated with the Micro Pointer on ANT1 Start checking from the phone set Place the Protect 1206i near the set and lift the receiver Watch for an increase of the RF level or starting of the vibration Please note It is pointless to test wireless radio telephones for they act exa
4. a fictitious meeting Nobody has to know about the pending search Close all drapes in the room Turn on all the lights and activate any other devices to imitate normal conditions It is also advisable to turn on a source of sound such as a stereo system or radio This sound source has two very important functions Voice activated transmitters will be activated Your actions will be masked Step 1 Selecting working mode Connect the rod antenna to ANT1 and the Micro Pointer microwave antenna to ANT2 Turn on the Protect 1206i 7 Make sure the ANT1 is selected button 9 Choose the operation mode with the help of the MODE button 4 1 For covert procedures use the vibration or silent mode 2 The sound mode is more convenient for locating and inspecting the RF source 3 The vibrating or mixed mode allows the operator to avoid constantly watching the bargraph when inspecting areas that are difficult to access The sound mode allows the operator to listen to the signal so that he or she can understand more about the source The FM modulated transmitter bug can produce a loopback effect when the unit is close to it or cause the effect of the disappearance of background noises which are usually present further away from the transmitter In this case the hum which can be heard in other parts of the room can disappear when the Protect 1206i approaches the transmitter and there is a silence on the speaker In this case it is recommen
5. body worn telephone or other types with different methods of modulation both analogue and digital including the following bands VHF UHF GSM 900 1800 1900 MHz 3G Wi Fi Wi Max 4G LTE etc The second channel ANT2 marked as 2 44GHz 5 39 GHz 2 is used for the detection of Bluetooth and Wi Fi only or other signals with coinciding frequencies but with a higher sensitivity The usual method of searching suggests using the ANT1 antenna 1 i e 50 6000 Mhz first in order to cover a wide range of frequencies Then the procedure of scanning the area should be repeated with the ANT2 2 selected Use the buttons 8 and 9 to toggle between ANT1 and ANT2 For assistance during the search the Protect 1206i has an active correlation mode This function allows the operator to study the suspicious signals in certain cases When the CORR button 10 is pressed in close proximity to the suspicious area the unit produces probing beep signals The sound is picked up by a bug and then transmitted into the air The unit will receive and demodulate transmitted waves and the operator can see signs of the probing signals on the DEMODULATION display 3 Fluctuations appearing simultaneously with the beeps will warn of an FM transmitter or other type of transmission which correlates with the sound The Protect 1206i has a 16 segment SIGNAL STRENGTH bargraph indicator 6 providing precise information to the operator The signals can be measu
6. covers frequencies in the range of 50 6000MHz It is difficult to cover such a wide band simultaneously but the rod antenna used in the new version of the Protect 1206i manages this task very well The antenna gives good results at detecting signals on frequencies starting from 50 MHz and higher up to 3000MHz including all the following bands VHF 140MHz UHF 450MHz 900MHz 1200MHz and 2400MHz Although the rod antenna can be used for detecting signals above 3000MHz the microwave antenna Micro Pointer can give better results on these bands Additionally the microwave antenna gives directionality for easy pinpointing Therefore it is possible to use the Micro Pointer antenna in the left ANT1 socket for an additional search instead of the ANT2 where it is as standard Connect the Micro Pointer antenna to the ANT1 temporarily instead of the rod antenna and select ANT1 9 to get a better detection distance on the higher frequencies above 2000Mkz Signals on lower frequencies will be omitted You will detect Wi Fi 2 4MHz some bands of LTE 4G Bluetooth Wi Max 2 3 GHz 2 5 GHz 3 5 GHz and 5 8 GHz Wi Fi 5 GHz and all other signals including audio and video bugs sending radio signals above 2GHz Scan the room again taking into consideration the direction of the antenna Try scanning objects and surfaces as closely as possible because the higher the frequency is the shorter the detection distance will be Some 5 GHz signals might be detected at
7. to it or cause the effect of the disappearance of background noises which are usually present further away from the transmitter In this case the hum which can be heard in other parts of the room can disappear when the Protect 1206i approaches the transmitter and there will be silence from the unit s speaker When this happens it is recommended to use the CORR function 10 while watching the DEMODULATION display 3 Simultaneous fluctuations will warn of danger Please note that the sound mode is not suitable for covert searches as the transmitter will hear sounds in the room The vibration and mixed modes are convenient when probing difficult to reach objects and places The operator can work without the necessity of watching the bargraph a high RF level will be indicated by vibration of the unit The Protect 1206i is powered by two AAA LRO3 batteries It is recommended to use alkaline batteries in order to reach the optimal working duration The LOW BATT indicator 11 will turn on when the batteries are nearing exhaustion Usage Vv Sweeping the room Before starting sweeping some preparation tasks should be carried out Firstly it is necessary to consider the time and individual circumstances of the sweep Due to there being lots of devices which are remotely controlled it is recommended to cary out a sweep during working hours in real situations when the eavesdropper most wants to listen It may be necessary to arrange
8. can contain a bugging device Detection distance The detection range of the Protect 1206i depends on two major factors The output power of the transmitter and its frequency The surrounding RF environment such as radio TV and communication devices which can cause the device to show an increased level Typical detection distances Type of signal Rod antenna Micro Pointer Micro Pointer in ANT1 in ANT2 in ANT1 VHF bug a a 140 MHz 5 mW 30 60 cm UHF bug L L 450 MHz 5 mW 20 100 cm GSM LTE CDMA 800 900MHz 30 200 am GSM 1900 p 3G 2100 Mhz 30 100 cm 60 200 cm A ENHE 30 80 cm 1 4 meters 0 5 2 meters accesspoint 2 4 GHz Wi Fi client 20 60 cm 60 120 cm 40 100 cm Bluetooth 10 20 cm 20 80 cm 10 30 cm LTE Higher ranges 10 30 p 30 100 cm Wi Max SEH Skt 5 50 cm 30 100 cm 20 60 cm video cameras etc
9. ctly like a bugging device themselves due to the use of radio waves Only a physical inspection of these items is sufficient to know if they are bugged Move the detector along the phone line while keeping it off the hook Check all the outlets and communication boxes If possible ask a second person to lift the receiver and then hang it up repeatedly If you see that the RF level changes when the line is activated and deactivated this is a sign of a bug s presence Try to locate the place where the RF level is highest and then perform a physical search Testing people There are many types of body carried transmitters They may broadcast conver sations and or video signals While carrying the Protect 1206i with ANT1 selected and the rod antenna in it approach the person If the bargraph level grows it means that the person is carrying a transmitting device If you change location you will need to select the necessary attenuator mode in accordance with the back ground noise Another way of testing people is to place the Protect 1206i on the desktop In this case it is necessary to watch the bargraph carefully when the person approaches the table and sits down Other applications If you cannot inspect a whole room for example in a restaurant or someone else s office the Protect 1206i can be used for checking the closest objects to you In a restaurant it may be necessary to check the items on the table or the table itself since they
10. ded to use the CORR function 10 while watching the DEMODULATION display 3 Simultaneous fluctuations will warn of the danger Step 2 Scanning the area Enter the room holding the Protect 1206i while watching its bargraph or paying attention to the vibrator Turn the lights and other equipment in the room on and off Walk around the room continuously watching the indicator or feeling for the Protect s vibration The bargraph level will increase or decrease when the detector is closer to or farther away from a transmitting device Probe all objects which may contain a hidden surveillance device When you get close to an RF bugging device the bargraph of your Protect 1206i will rise or the vibration will appear Pay special attention to the places where an AC exists as a bug can be powered from it AC outlets AC lines electrical appliances etc The distance of detection may vary depending on the situation Usually the Protect 1206i is able to detect an average radio microphone at a distance of 30 100 cm although it is recommended to probe objects at a proximity of 10 cm The bargraph can display 16 different levels In the case of detecting an increased level try to find where it is the strongest Move the detector in different directions and or rotate it Turn on the attenuator near a strong source when the bargraph lights fully It will drop and then increase further therefore making it possible to locate more precisely Do not forg
11. dy in order to transmit audio or video In addition a well hidden dedicated bugging device can be created with the use of accessible Bluetooth and Wi Fi electronic components Therefore we strongly recommend repeating a scanning of the area with the ANT2 selected and the Micro Pointer antenna in ANT2 In this mode the Protect 1206i will detect Bluetooth and Wi Fi devices only at a longer distance so that location of all wireless sources will be much easier The new Micro Pointer antenna provides great amplification a good detection distance and directivity for quick pinpointing Repeat the procedure of scanning mentioned in Step 2 but keep in mind t hat the directed antenna Micro Pointer sees signals in its direction area only opposite the detector Therefore scan slower while rotating the detector in different directions left right up down at a number of points in the room Note before starting the actual sweeping you may want to have a short training using your own Wi Fi router If you have found a direction with a high level approach the source while pin pointing it by rotating the detector slightly As such you will locate the source Inspect it very carefully Consult IT employees to become acquainted with the scheme of wireless access points and the location of wireless telephones used in the office to make sure it is a own and legal access point Step 6 Checking the microwave range The ANT1 channel of the detector
12. e a radio microphone 3 Switch the Protect 1206i to ANT2 2 temporarily to detect whether it is a Wi Fi Bluetooth signal or not Step 4 Physical search Not depending on the results start a physical search Visually inspect and probe each object in the highlighted area Disassemble if necessary lamps desktop items telephones AC outlets phone outlets Inspect all power and phone lines carefully Open books wardrobes etc Remember that a physical search is a fundamental operation during the sweep Illegal transmitters often have a number of these typical characteristics Compact Hidden e Handmade or produced with low quantity With microphones or video cameras e Implanted inside another piece of electronic equipment Connected to a telephone line Connected to AC wires or with its own source of power With antenna With a SIM card inserted If you find a bugging device do not stop You should continue the search more carefully as eavesdroppers often install more than one device They may install a so called foolish bug which may be easily detected and some other well hidden devices that may have remote control and non standard modulation Step 5 Checking Bluetooth Wi Fi Bluetooth and Wi Fi can be easily used for bugging and therefore needs special attention Conventional Bluetooth headsets smartphones or cameras can be installed or intentionally left in premises in personal possessions or on a bo
13. et to restore the normal sensitivity of the device before continuing the search by turning the attenuator off Step 3 Checking a suspicious place The bargraph may often show an increased level near wires or metal objects such as building constructions This may not be a bug but rather the metal acting as an antenna extension A similar situation may appear in the apertures of windows due to radio waves coming from the outside This interference does not usually have a concentrated area and exists within a large expanse whereas a bugging device will have an area of a strong and concentrated field in a more local area After you have found the exact location of a high field perform the following actions 1 If secrecy is not critical turn on the sound mode and listen to the sound Check for the presence of a loopback effect or the effect of the disappearance in back ground noise near the suspicious place It is also possible to recognize some typical communication protocols by the sound they produce Bluetooth gives a crackle sound Wi Fi will produce a scratching sound GSM gives a buzzing hum DECT is heard as a 50Hz AC transformer hum The IDENTIFICATION LED 5 will change its color correspondingly Please note that some DECT signals may be not recognized 2 Press the CORR button while watching the DEMODULATION display to find the synchronous fluctuations They will show the presence of correlation i
14. microwave log periodic directed antenna supplied in the standard set 2 4 times longer distance to all sources above 2GHz Wi Fi 2 4GHz Wi Fi 5GHz Bluetooth Wi Max LTE High etc The directionality provides easy pinpointing of a wireless source Now you not only know that there is a Wi Fi source but can quickly pinpoint it Increased dynamic range The bargraph now rises quickly to weak signals and increases slowly to strong signals thus giving the opportunity to locate the source e New Attenuator The new algorithm widens the dynamic range even more making the location procedure easier Turn on the attenuator near a strong source the bargraph which lights fully will drop and then increase further therefore making it possible to locate more precisely Other features Vv Extra high sensitivity to Bluetooth Wi Fi 2 4 GHz Wi Fi 5GHz and wireless video cameras Frequency range Main antenna ANT1 50 6000 MHz Auxiliary antenna ANT2 2 4 2 48 GHz 4 9 5 875 GHz The perfect tool for searching for digital and analogue transmitters of all types 16 segment bargraph indicator 3 modes sound vibration and mixed Correlation function discovers FM transmitters by the presence of corelation probing sound is used 2 levels of sensitivity attenuator Long battery life Durable metallic body Microprocessor controlled Specification wv Frequency range Antenna 1 50 6000 MHz Antenna 2 2 4 2 48 GHz
15. red in the range of 30dB to 8dB The closer the unit is to the source of transmission the higher the bargraph s level will be In addition to this the new version of the detector has an increased dynamic range meaning that the bargraph rises quickly to weak signals and increases slowly to strong signals some powerful sources may cause full illumination of the display or when the unit is in close proximity to the transmitter In such cases use the attenuator buttons ATT and ATT 8 to alter the sensitivity Turn on the atte nuator near a strong source when the bargraph lights fully It will drop and then increase further therefore making it possible to locate more precisely Note that the vibration function will be turned on when the SIGNAL STRENGTH 6 approaches the 6th segment The MODE 4 control of the Protect 1206i is used for selecting the desired indication method There are four modes available e Sound mode when the unit s speaker produces demodulated sound Vibration mode when the unit s vibrator turns on when a high level of the RF field is reached i e 6th segment of the bar graph e Mixed mode when both types of indication are used e Silent when there is no sound or vibration The sound mode is convenient for a fast search as an experienced operator may be able to distinguish between different types of signals An FM modulated transmitter bug can produce a loopback effect when the unit is close
Download Pdf Manuals
Related Search