dt 500p printer operating instrustions
Contents
1. DT 500P PRINTER OPERATING INSTRUSTIONS SYSTEM PRINTER SPO optional PHT EH BATTERY INSERTION 1 With the POWER SWITCH in the OFF position press and slide down the battery cover 2 Put in 4 pcs of AA size batteries in polarities as shown in the battery compartment 3 Slide up the battery cover until it clicks closed Always use batteries of the same manufacturer and replace all batteries at the same time If the printer will not be used for a long time remove the batteries from the battery compartment PAPER INSERTION 1 Open the paper cover 2 Cut the end portion of the roll of thermal paper straight 3 Turn on the printer 4 Insert the end portion of the paper into the paper insertion slot in the correct way 5 Keep pressing the PAPER ADVANCING SWITCH until the end of paper is 2 3 cm out from the printer Put the roll of paper into the paper compartment and close the paper cover O NEVER pull paper from the reverse direction this may damage the printer For replacing the roll of paper before it is used up first tear off the paper and press the PAPER ADVANCING SWITCH until all the remaining paper is out Do not touch the paper on the right side as it may cause poor printing Always store the paper rolls in a cool dry place and keep away from direct sunlight CONNECTION TO PRINTER 1 Insert both plugs of the connecting cord to the printer and stopwatch with the power of the printer turned off Alway2. rn on the power then press A to start upload In this print mode the respective LAP SPLIT or LAP SPEED times together with their AVERAGE and FASTEST times are printed To print out only a particular race press B when UPLOAD ALL is displayed to go to that particular race and press A to print out 2 Remarks Do not pull out the paper when the printer is not in operation Do not print if there is no paper in the printer Keep the printer from high moisture or dusty environment Do not subject the printer to violent shocks Do not put the printer under direct sunlight or near high temperature The case may be deformed or damaged Do not wipe the case with a cloth moisturized with chemicals This may discolor or deteriorate the printer Keep the jack away from moisture Remember to turn off the power switch if the printer is not in operation to avoid battery consumption Replace the batteries when the printing slows down getting poor light or messy print outs paper not advanced normally or cannot be printed www digisportinstruments com 3
3. s hold the plug as illustrated Either plug can be inserted into either jack Be sure that both jacks are inserted all the way in the stopwatch and printer 2 After use turn off the power of the printer then remove the plugs After removing the plug from the stopwatch remember to insert the rubber cap to the jack to keep it away from dust and moisture OPERATION IMMEDIATE PRINT OUT After connecting the stopwatch to the printer slide the power switch to ON the paper will advance by 1 line 2 Slide the PRINT MODE SWITCH to the TOP position Only the SPLIT or SPEED depending on whether the stopwatch is in CHRONO or SPEED mode will be printed If this switch is slid to the DOWN position both LAP and SPLIT or LAP and SPEED will be printed In SPEED mode if B is pressed while the previous record is still being printed that SPEED record cannot be printed in real time The memories still record the full data for recall or upload 3 Press button A of the stopwatch to start the race The YEAR MONTH and DATE START together with the CHRONO mode will be printed The time unit in the SPEED distance setting is minutes H for hour and S for seconds 4 Press A button to stop UPLOAD PRINT OUT Apart from doing the print out while the stopwatch is taking the LAP times the print out can be done by uploading from the memories after the race This can be done by pressing C button until UPLOAD ALL is displayed connect the printer and tu
Download Pdf Manuals
Related Search