USER MANUAL
Contents
1. BLIZZARD 909 LUMEN SEARCH amp RESCUE LED FLASHLIGHT FS E45R USER MANUAL B VULTAY to impacts and scratches S va s N 7 VULTA BLIZZARD PRECAUTIONS A Please read and follow these instructions and keep this manual in a safe place This flashlight is extremely bright and can cause temporary or even permanent blindness Do not shine the flashlight in the eyes of any person or animal When powering on the flashlight make sure to point it down or away from you and anyone else The surface of this product can become hot after prolonged use Be careful when touching it and make sure to keep it away from anything flammable or combustible Do not stand the flashlight upright on its lamp head when powered on In this position the lamp head can become dangerously hot and damage the flashlight and anything nearby Never leave the flashlight unattended when it is powered on Before long term storage remove the batteries and store them in a cool and dry place to avoid leakage Always install batteries of the same type brand and age Do not combine different types or brands or old and new batteries OA VULTA BLIZZARD This can cause the batteries to leak overheat or explode Install the batteries in the proper orientation as indicated by the markings in the battery carrier Installing batteries in the reverse orientation can cause them to leak overheat or explode and wi2. ED TYPE CREE XM L2 POWER SOURCE Three 18650 or six CR123 or RCR123 3 or 3 7 V batteries RUNTIME Maximum 2 hr Minimum 150 hr CONSTRUCTION Body MIL SPEC Type III hard anodized aerospace grade aluminum alloy Bezel Stainless steel Lens Tempered glass IMPACT Up to 6 5 2 m RESISTANCE WATERPROOFING IPX 8 standard up to 6 5 2m submersion Aaaa JANE 1 394 425 m DIMENSIONS Length 6 5 16 5 cm Head Diameter 2 2 5 7 cm Tail Diameter 1 7 4 5 cm WEIGHT Without batteries 12 5 0z 355 g With batteries 1 1 lb 499 g VULTA BLIZZARD VUUETA TWO YEAR LIMITED WARRANTY This VULTA product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of two 2 years from the original purchase date or thirty 30 days after replacement whichever occurs later The warranty provider s responsibility with respect to this limited warranty shall be limited solely to repair or replacement at the provider s discretion of any product that fails during normal use of this product in its intended manner and in its intended environment Inoperability of the product or part s shall be determined by the warranty provider If the product has been discontinued the warranty provider reserves the right to replace it with a model of equivalent quality and function This warranty does not cover damage or defect caused by misuse neglect a
3. ccident alteration abuse improper installation or maintenance EXCEPT AS PROVIDED HEREIN THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE This warranty provides you with specific legal rights and you may also have additional rights that vary from state to state To obtain warranty coverage contact the Vulta Customer Service Department to obtain a return merchandise authorization RMA number and return the defective product to Vulta along with the RMA number and proof of purchase Shipment of the defective product is at the purchaser s own risk and expense For more information or to arrange service visit www vultagear com or call Customer Service at 212 594 2353 CH Product warranty provided by the Gradus Group www gradusgroup com VULTA is a registered trademark of the Gradus Group 2014 Gradus Group LLC All Rights Reserved 662
4. izzard FS E45R is powered by three 18650 or six CR123 or RCR123 3 or 3 7 V batteries The batteries are inserted into the all aluminum battery carrier which is housed in the flashlight s grip The battery carrier can be preloaded so it s always ready for use To facilitate quick and easy loads in low light situations the carrier can face either direction when you insert it into the grip Note Make sure to load the batteries with the positive and negative terminals facing the proper directions Loading batteries into the VULTA BLIZZARD 0 carrier incorrectly can damage the flashlight and void the warranty Important When charging via the Vulta FA CH1 Universal Charger use only rechargeable 18650 batteries To install batteries follow these steps 1 Make sure the flashlight is turned off 2 Unscrew the lamp head from the grip and remove the battery carrier 3 Insert three fresh 18650 or six fresh CR123 or RCR123 batteries into the battery carrier Make sure the batteries are facing the proper direction as indicated by the markings on the carrier 4 Insert the battery carrier in either direction into the grip 5 Screw the lamp head onto the grip until secure OPERATION The Blizzard FS E45R employs a continuously variable control ring to turn on the flashlight control output power and engage Strobe mode 08 VULTA BLIZZARD POWERING ON THE BLIZZARD FS E45R The Blizzard FS E45R employs a continuously va
5. ll void the warranty This product is waterproofed for freshwater only If it comes into contact with salt water immediately dry the flashlight and remove he batteries reassemble and rinse with reshwater Dry thoroughly and install new batteries Do not attempt to disassemble or repair this product It is dangerous and will also void the warranty Keep this product away from children Do not eave children unattended near this product Use only parts provided by the manufacturer Make sure that this product is intact and that here are no missing parts To avoid damage to this product be careful not to overtighten or improperly thread any of he threaded fittings All photos are for illustrative purposes only VULTA BLIZZARD 0 9 PRODUCT DIAGRAM LED LAMP HEAD HEAT SINK AREA VARIABLE CONTROL RING B o RING a erp LANYARD EYELETS CHARGING CONTACTS Also Included HOLSTER LANYARD a B H SPARE O RING MM USER MANUAL E TWO YEAR LIMITED WARRANTY A Note about Maximum Output When the flashlight is in High mode the battery discharge drive circuit and LED will all be producing heat and the lamp head may become extremely hot Please be cautious when touching it To protect the battery circuit and LED and to extend the lifetime of the flashlight we do not recommend continuously running the flashlight on High mode for more than 10 minutes INSTALLING BATTERIES The Bl
6. riable control ring to turn on the flashlight control output power and engage Strobe mode SETTING THE MODE Strobe Strobe mode continuously emits quick flashes of bright light To enter strobe mode rotate the variable control ring clockwise all the way so it rests under the strobe mode marking X 1 SOS In SOS mode the flashlight blinks brightly in the international Morse code distress signal pattern To enter SOS mode start with the flashlight turned on and in strobe mode Quickly rotate the variable control ring past the maximum output marker and then back to the strobe mode marker VULTA BLIZZARD 9 THE LANYARD You can attach and wear the included lanyard to help prevent accidental drops and to free up a pocket To attach the lanyard clip it onto one of the lanyard eyelets on the flashlight s tailcap O RING MAINTENANCE The Blizzard FS E45R s O ring is installed on the threaded fitting to help seal out water The O ring is prelubricated to extend its lifetime ensure smooth operation and increase water resistance If the O ring dries out or there is little or no lubricant remaining we recommend applying a small amount of O ring lubricant The FS E45R comes with a replacement O ring If the original wears out after long term use replace it with the included spare 0 VULTA BLIZZARD SPECIFICATIONS OUTPUT Maximum Strobe 909 Im Minimum 6 lm BEAM INTENSITY 45 156 cd L
Download Pdf Manuals
Related Search