Home

Infineon TPM Installation Guide

image

Contents

1. All other brand and product names are trademarks or registered trademarks of their respective companies TPM Installation Guide 1 Introduction Your computer has an integrated Trusted Platform Module TPM To activate TPM you will need to either enable it or install the Infineon Security Platform Tools software This installation guide describes how to install and configure TPM Before using TPM please read this Installation Guide carefully 1 1 Convention This guide uses the following formats to describe identify and highlight terms and operating procedures Safety Icons This guide contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries damage to your equipment or loss of data These safety cautions have been classified according to the seriousness of the risk and the icons highlight these instructions as follows Indicates an imminently hazardous situation which if not avoided will result in death or serious injury AWARNING ndicates a potentially hazardous situation which if not avoided could result in death or serious injury AGAUTION ndicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION ndicates a potentially hazardous situation which if not avoided may result in property damage NOTE Provides important information 4 TPM Installation Gu
2. Features screen and click the Next button NOTE pm 7ouseSecure E mail it is necessary to set the configuration in the Mail Software Refer to Chapter 4 Secure E Mail for details on Secure E mail E The File and Folder encryption EFS feature is not available in the Windows XP Home edition E The HDD Hard Disk Drive must be formatted in NTFS format to use the File and Folder encryption EFS feature The configurations set in this section can also be modified after configuration 18 If Secure E mail is selected in the Security Platform Features screen the following screen is displayed Click the Next button NOTE If any of the Outlook Outlook Express or Netscape buttons are clicked on the screen the help for the Secure E mail settings for the respective Mail Software is displayed It is possible to see this help even after the wizard is closed 19 The Encryption Certificate issuance message would be displayed in the Security Platform Features screen Select the certificate to issue and click the Next button Normally click on the Create button to create and select the certificate TPM Installation Guide 9 NOTE NOTE 20 If Personal Secure Drive PSD is selected in the Security Platform Features screen the following screen is displayed On this screen select the drive you wish to allocate to PSD then enter the label name of that drive and click the Next button Refer to Chapter 3 Personal Secure Drive for deta
3. OS is extended and the system is made more secure as the encrypted key for the file encrypted by EFS is protected by TPM The operations required for encrypting decrypting the files are very similar The difference in operation is that when files encrypted by EFS are initially accessed after logging on to Windows the TPM password of the current logon user must be entered H Please do not specify C Documents and Settings and use EFS to encrypt all the folders and files under it E Donotuse EFS to encrypt if the token file or backup file created during owner or user registration is stored in C If encrypted the decryption process might not work E When using file encryption by EFS it is strongly recommended that the user become familiar with the EFS related information in Windows Help This will help prevent files from not being able to be decrypted due to unknowingly changing the encryption key used in EFS or due to the loss of the key TPM Installation Guide 6 TOSHIBA Password Utility By using the TOSHIBA Password Utility the configuration can be set to prevent users without Supervisor authority from changing TPM related settings in the BIOS setup Once this configuration is set users without Supervisor authority will not be able to change TPM related settings in the BIOS setup items in the Security Controller box 1 Run the following file to start TOSHIBA Password Utility C Program Files Toshiba Windows
4. Recovery screen for Emergency Recovery Token authentication enter the password in the Password and Confirm Password text boxes and click the Next button It is strongly recommended that you create an emergency recovery token is created so that information in TPM and user data related to TPM is safe in the event that severe system troubles occur Failure to follow this recommendation could possibly result in data loss 9 In the Password Reset screen select the Create a new Token and specify the location for creating and saving the Password Reset Token 10 In the Password Reset screen for Password Reset Token authentication enter the password in the Password and Confirm Password text boxes and click the Next button It is strongly recommended that you create and save the Password Reset Token on a storage medium such as a floppy disk that is accessible even in the event of a computer failure Be sure to store the disk in a safe location for possible future use E If there are multiple computers with TPM the token for each computer is different and should be stored separately H The recovery token for the registered TPM owner cannot be recreated In order to prevent loss multiple copies of the token should be created and stored as recommended in the note above The same TPM owner name can be created by initializing TPM at the BIOS menu and registering a new owner however as the owner is actually different from the previously regi
5. Utilites SvpwTool TOSPU exe 2 Register the Supervisor Password in the Supervisor Password tab 3 Open the User Policy setup screen from the Supervisor Password tab 4 In the TPM box uncheck the items that you do not want users without Supervisor authority to access and modify 5 Press the Set button and after carrying out Supervisor authentication save the modified User Policy 6 Exit TOSHIBA Password Utility TPM Installation Guide 15 7 Migration of the TPM Environment and Disposal 7 1 Migration CAUTION 18 PE NOTE NOTE Click the Security Platform icon in the task tray and select Manage Security Platform In the Infineon Security Platform Settings Tool window click the Migration tab In the Migration tab clicking the Learn more button displays the details of the migration operation The operation must be performed for both the source platform and the destination platform Please perform the operation as per the instructions on the screen Only the TPM data is migrated during this process so perform the migration of the data inside the Personal Security Drive and the files encrypted with EFS using the usual file operations H Remember it is necessary to also install the Infineon TPM Professional Package in the destination platform E Migration between the PCs via a network cannot be done when using Windows Firewall under the Windows XP SP2 environment Please use a FD or other
6. higher than existing software based encryption The PSD size can t be specified less than 10MB 3 1 Advantages of Personal Secure Drive Encryption of the virtual drive using the safe and secure AES Advanced Encryption Standard key RSA algorithm for encrypted key generation Automatic encryption and decryption of transparent security data Files can be easily protected Simple Operation Personal Secure Drive functions in the same way as a standard Windows drive Easy management and setup procedure using Wizards 3 2 Personal Secure Drive PSD Basic Operation 1 If PSD is selected in Security Platform Futures click on the Security Platform icon in the task tray after logging in to Windows and select Personal Secure Drive Load NOTE Clicking on the Security Platform icon in the task tray allows selection of Personal Secure Drive Load Unload or Load at Logon 2 Infineon Security Platform User Authentication would be displayed Enter the TPM password The PSD virtual drive will be recognized once the correct password is entered TPM Installation Guide 11 3 The following is a sample screen showing the PSD detected in Windows explorer ge LI LA ard Dick P aii Devices mth Remo kle Stor aye In this screen although the Personal Secure Drive has been detected as Drive N with a drive name of Personal Secure Drive it is possible to change this setting in the User Setting
7. TOSHIBA TPM Trusted Platform Module Installation Guide v21 Table of contents 1 Introduction 1 CONVENTION Lina iii 4 1 2 TPM An Overview 5 2 Using TPM for the first time 2 10115 ao 6 2 2 Installing the Infineon TPM Professional Package 7 2 3 Registering Owners and Users in TPM 7 3 Personal Secure Drive 3 1 Advantages of Personal Secure Drive a 11 3 2 Personal Secure Drive PSD Basic Operation 11 4 Secure E Mail Gonfigurationi assoli lei 13 EFS Encrypting File System Extension 6 TOSHIBA Password Utility Migration of the TPM Environment and Disposal TA MOTON 155244 cca cont edn ilaria 16 7 2 PC Disposal sesso ira eat atakk 16 8 Recovery for TPM 8 1 Emergency Recovery Process An Overview 17 8 2 Resetting the User Password i 17 8 3 PSD TESTOre sia 17 Index 2 TPM Installation Guide Copyright This guide is copyrighted by Toshiba Corporation with all rights reserved Under the copyright laws this guide cannot be reproduced in any form without the prior written permission of Toshiba No patent liability is assumed however with respect to the use of the information contained herein 2008 by Toshiba Corporation All rights reserved Trademarks Microsoft and Windows are trademarks of Microsoft Corporation in the United States and or other countries
8. d Netscape Note that this function may not be usable depending on the version of the software Configuration NOTE 1 Acquire a Digital ID for use in Secure E Mail from the Commercial Certificate Authority CA Refer to TPM Help for details on CA 2 Install the Digital ID to the computer based on the usage and installation methods specified by CA At this stage ensure that the Digital ID is linked to TPM as a Cryptographic Service Provider CSP 3 Set the configuration for Secure E Mail in the E mail software Refer to the manual for each E mail software and the help for the Infineon Security Platform for details Set the Secure E mail setting in the Security Platform Features when SR out user registration to TPM Step 2 3 if it was not assigned 1 1 Using Help to look up information related to E mail and TPM 1 Double click the TPM icon in the task tray 2 Select the Info tab 3 Click the Help button 4 Search using keywords under the Search tab for items you wish to find out more about Example E Mail 2 Enabling the E mail function in User Settings Double click the TPM icon in the task tray Select the User Settings tab Click the Configure button Check the Secure E mail option and click the Next button AN 5 TPM Installation Guide 13 5 EFS Encrypting File System Extension CAUTION If the File and Folder encryption option is checked in Step 2 3 the EFS function of the
9. d here are for the recovery of TPM content and not for the recovery of TPM related data such as EFS encrypted files or files in the PSD For files in the built in HDD it is strongly recommended that backups are separately created and safely stored 8 2 Resetting the User Password This function can be used if the Infineon Security Platform user forgets the basic User Password or if there is a problem with the user s authentication device If the password cannot be reset the user cannot use the functions in the Security Platform This might result in loss of secret data Refer to Basic User Password Reset in Help for details 8 3 PSD restore PSD data can be recovered if the PSD certificate is lost using Personal Secure Drive Recovery Refer to Personal Secure Drive Recovery for details TPM Installation Guide 1a 18 TPM Installation Guide Index A AES 11 B BIOS 6 BIOS setup 15 C certificates 5 CLEAR OWNER 16 Commercial Certificate Authority CA 13 Cryptographic Service Provider CSP 13 D Digital 13 Digital ID 13 E Emergency Recovery Token 8 encryption 5 Infineon TPM Professional Package 6 N Netscape 7 9 13 O Outlook 7 9 13 P Password 5 Basic user 9 Emergency Recovery Token 8 owner 8 Password Reset Token 8 TPM Installation Guide 19 Index Password Reset Token 8 Personal Secret 9 Personal Secure Drive 11 Load 11 Load at Logon 11 Unload 11 R restore
10. er must log into Windows and register individually TPM Installation Guide 5 2 Using TPM for the first time This manual contains only the general guidelines Please refer to and read the TPM HELP after installing the TPM Professional Package When using TPM for the first time you will need to configure it as follows The settings 1 3 can be done by logging in as Windows administrator 1 Enable TPM 2 Install the Infineon TPM Professional Package 3 Register the owner and users in TPM 2 1 Enabling TPM To enable TPM perform the following BIOS settings 1 Switch on your computer while pressing the Esc key 2 A message is displayed Press the F1 key 3 The BIOS Setup screen is displayed 4 Press Page Down to see the next screen 5 Set the TPM in SECURITY CONTROLLER to Enabled NOTE Some models may have Hide TPM as an option on the BIOS setup screen If your system shows Hide TPM it should be set to No before you set TPM to Enabled Otherwise you will not be able to change TPM 6 Press the End key save the changes to the BIOS settings and press Y key CAUTION nternal data consistency in TPM is not guaranteed when the computer is sent for repair or maintenance Before sending the computer for repair or maintenance please make a backup of not only the files in the HDD Hard Disk Drive but also the TPM data by using the backup feature Refer to Chapter 8 Recovery for TPM The securit
11. external removable media for migration Disposal When discarding the PC please perform the following two processes in order to prevent any leak in confidential information Please do the same when changing the PC owner too 1 Uninstall the Infineon TPM Professional Package and delete the recovery archive and the Emergency Recovery Archive Token Furthermore please delete all the data in the HDD Hard Disk Drive 2 Step 1 Display the BIOS Setup screen Refer to Chapter 2 Using TPM for the first time Step 2 Move the cursor to the Clear TPM Owner option in the SECURITY CONTROLLER setting and press the spacebar or backspace key With this operation all the data inside TPM is destroyed and TPM is disabled thereafter Step 3 A message is displayed Press Y E S keys followed by the Enter key As the internal TPM data is deleted the files can no longer be read 16 TPM Installation Guide 8 Recovery for TPM 8 1 Emergency Recovery Process An Overview The Emergency Recovery Process is used H when changing TPM due to TPM problems H when the motherboard with the onboard TPM has a defect and the motherboard was changed H when TPM was cleared either accidentally or due to some other reasons Refer to Restore Emergency Recovery Data Step by Step in Help for details NOTE mm Printing out a hardcopy of Restore Emergency Recovery Data Step by Step in Help beforehand is recommended H The explanations state
12. ide 1 2 TPM An Overview The built in security controller TPM based on the Trusted Computing Group specifications TPM offers data protection by using secret encryption keys instead of secret encryption formulae Algorithms In encryption based solely on software there is a danger that the encryption key saved in the file or read into the PC s memory could be read and deciphered By storing the encryption key in TPM instead the data is more securely protected As TPM uses public and standardized specifications a more secure PC environment can be built by utilizing the corresponding security solution For additional TCG specification information visit their website at http www trustedcomputinggroup org CAUTION Encryption Certificates and Passwords H 7PM offers a feature to create and set multiple encryption keys certificates and passwords Once set make sure the passwords are carefully stored and encryption key files are backed up If these settings are lost or forgotten files encrypted using this TPM cannot be decrypted and the encrypted data cannot be accessed TPM M Though TPM offers the latest security features it does not guarantee complete data and hardware protection Please note that Toshiba is not responsible for any failure or damage that might be caused due to the use of this feature NOTE fi multiple users have been registered in Microsoft Windows and if these users are to use TPM each us
13. ils on Personal Secure Drive PSD 21 In the Security Platform Features screen enter the volume of storage space you wish to allocate for PSD then select the drive and click the Next button 22 The Confirm setting is displayed click the Next button E t is strongly recommended that you specify a built in HDD Hard Disk Drive normally C drive in the My Personal Secure Drive will be saved on this drive pull down menu E The space available in the drive specified above should be more than the space specified in My Personal Secure Drive will have XX MB of storage space 23 After some time the Wizard completed message will be displayed Click the Finish Button If multiple users have been registered in Windows and if these users are to use TPM each user must log into Windows and register individually After logging into Windows to perform user registration click the Security Platform icon in the task tray and select Security Platform User initialization When modifying the configuration click on the Security Platform Setting Tool icon in the task tray and do the modifications in the configuration screen 10 TPM Installation Guide 3 Personal Secure Drive The Personal Secure Drive creates data storage for storing the information files and data files can be encrypted and saved in the virtual drive The files are not simply encrypted and stored in the HDD As they are protected by TPM the level of safety is
14. point 12 5 screen Basic User Key Password 9 Basic User Password Reset 9 BIOS Setup 6 16 Create Security Platform Owner 8 Emergency Recovery 8 Initialization 7 Password and Authentication 9 Password Reset 8 Security Platform Features 9 10 User Initialization Wizard 9 secret encryption formulae 5 secret encryption keys 5 Secure E mail 9 SECURITY CONTROLLER 6 16 Security Platform icon 7 10 16 Supervisor Password 15 T TPM owner 8 U User policy 15 W Windows Firewall 16 20 TPM Installation Guide Memo Please ensure that the passwords or keywords used are stored carefully in case the passwords are forgotten where third parties cannot access to prevent leakage of secret information Do not store in locations which are accessible by unauthorized personnel Example pasted onto tabletops Owner Password Basic User Password Storage Location of the Emergency Recovery Token Emergency Recovery Token Password Storage Location of the Backup file Storage Location of the Password Reset Token Password Reset Token Password Storage Location of the Personal Secret file TPM User Password Windows User Name TPM User Password Windows User Name TPM User Password Windows User Name TPM User Password
15. s of the Infineon Security Platform Settings Tool CAUTION H As files in the PSD are not backed up using the Backup feature of the Infineon Security Platform Settings Tool general backup methods such as copying the files in the PSD to an external removable medium in the explorer should be used to avoid possible data loss M The data for the system restore point set by the Windows System Restore function is deleted after the TPM password is entered during Windows startup the PSD is mounted and the virtual drive is assigned It is strongly recommended to use either of the following methods to save the system restore point data E Do not use the PSD function and use only the file encryption function via the EFS E Temporarily disable the PSD function just before modifying the Windows environment Disable the PSD function gt Set the Restore Point gt Modify the system gt Check that Windows starts up properly gt Set the PSD function back to its previous state Please refer to Windows Help for details on the restore point NOTE The PSD needs to be set for each TPM user For example if there are two registered TPM users A and B B cannot see the PSD contents of A 12 TPM Installation Guide 4 Secure E Mall In this security platform the Digital IDs used for E mail are protected by TPM securing them from loss or theft Compatible E mail software includes Outlook Outlook Express an
16. stered owner in this case previously encrypted files cannot be decrypted H Ifthe token is leaked to or stolen by third parties together with the password they would be able to access the encrypted data Therefore it is strongly advised that the tokens and passwords are stored carefully TPM Installation Guide 11 The Summary is displayed Check the summary and click the Next button 12 It may take a few minutes before the Wizard completed successfully message is displayed Next click the Start Security Platform User Initialization Wizard checkbox and then click the Finish button 13 In the User Initialization Wizard screen click the Next button 14 In the Basic User Key Password screen for user authentication enter the password in the Password and Confirm Password text boxes and click the Next button 15 In the Basic User Password Reset screen ensure that Enable the resetting of my Basic User Password in case of an emergency has been selected Specify the location for creating and saving the Personal Secret file NOTE Please store this file in a safe location In times of need it would be required to reset the Basic User Password 16 The Password and Authentication screen will be displayed Confirm the displayed content and click the Next button NOTE t might take several minutes for the Security Platform Features screen to be displayed 17 Ensure that the desired features are selected in the Security Platform
17. ty Platform Integration Services Microsoft Outlook Integration Netscape Integration Encrypted File System Integration Personal Secure Drive Policy Administration Security Platform Services H TSS TCG Software Stack Service Provider H TSS Core Service H TSS Device Driver Library 2 3 Registering Owners and Users in TPM 1 Click the Security Platform icon in the task tray and select Security Platform Initialization ETEA TPM starts up and its screen is displayed Click the Next button In the Initialization screen select Initialize a new Security Platform And click the Next button TPM Installation Guide CAUTION CAUTION NOTE 4 Inthe Create Security Platform Owner screen for owner authentication enter the password in the Password and Confirm Password text boxes and click the Next button 5 The Features screen will be displayed Select the Security Platform function to set and click the Next button Refer to Help for more details on the Security Platform functions Setting Automatic Backup is strongly recommended If it is not set encrypted user data might be lost if it is abnormal 6 In the Backup screen specify the location for creating and saving the backup file Click the Next button 7 Inthe Emergency Recovery screen select the Create a new Recovery Token and specify the location for creating and saving the Emergency Recovery Token 8 In the Emergency
18. y functions that use TPM can no longer work properly if the data in TPM is lost Example Files that were encrypted using TPM can no longer be opened Failure to do so may result in possible data loss NOTE TPM is shipped with the Disabled setting by default Also there might be cases where the TPM is set to Disabled after the computer has been sent for repair or maintenance Please enable TPM by reconfiguring it again E 7o prevent anybody other than the administrator and users of this computer from changing the BIOS settings it is strongly recommended that you set a BIOS password and a BIOS supervisor password Please refer to the Computer User s guide on how to set these passwords 6 TPM Installation Guide 2 2 Installing the Infineon TPM Professional Package Install the Infineon TPM Professional Package from the TOSHIBA Application Installer Please refer to the User s Manual on details about the TOSHIBA Application Installer The Infineon TPM Professional Package includes the following software and features Security Platform Getting Help Security Platform Settings Tool Security Platform Initialization Wizard Security Platform User Initialization Wizard Security Platform Migration Wizard Security Platform Backup Wizard Security Platform Password Reset Wizard Security Platform PKCS 12 Import Wizard Security Platform Certificate viewer and Certificate Selection Security Platform Status Indicator Applet Securi

Download Pdf Manuals

image

Related Search

Related Contents

Viewsonic Graphic Series VG2230wm  BL67 - USER MANUAL FOR PROFINET IO  Philips Plumeau brush FC6057    Eye-Q Video Vergrößerer Packungsinhalt  特集 - サーイ・イサラ  春シーズン第一回目の香港開催オークションにて Patek Philippe Ref  Development of an advanced real-time multimedia  Thule Gauntlet  Simply Brilliant  

Copyright © All rights reserved.
Failed to retrieve file