PS-1 Updater user manual
Contents
1. Phason PS 1 Updater user manual PS 1 Updater user manual The PS 1 Updater is an innovative and easy to use product that allows you to upgrade your PS 1 Scale Head s firmware Phason constantly improves and adds new features to their products With the PS 1 Updater you can upgrade the firmware in your scale head as these features become available The PS 1 Updater takes only seconds to use and can upgrade all the PS 1 Scale Heads at your site Features The PS 1 Updater works with PS 1 scale heads that have a firmware Quick and easy to use Compact design fits in a pocket version of 1 04 and later The updater will not work with earlier versions 90 day limited warranty Updating the PS 1 firmware There are two methods for updating the PS 1 firmware power on and power off Power on the power on method allows you to update the PS 1 firmware using the menu system without having to switch the incoming power off and then on If the power on method fails use the power off method The power on method works with firmware versions 1 07 and later Power off the power off method allows you to update the PS 1 firmware by switching the incoming power off and then on Use the power off method if the power on method fails The power off method works with firmware versions 1 04 and later PS 1 layout The bottom circuit board of the PS 1 is where you connect the PS 1 Updater The updater s cover label must2. face the right when you plug the updater into the socket 300420 rev 0 2006 09 06 PS 1 Updater user manual Phason To update the firmware using the power on method 1 Loosen the four screws in the PS 1 enclosure and then gently open the cover Make sure not to disconnect the ribbon cable 2 Insert the PS 1 Updater onto the connector marked CON3 on the top left of the bottom circuit board 3 Scroll to the Advanced Menu and then press Select Enter your PIN to continue 4 Scroll to the Maintenance menu and then press Select 5 Scroll to Lisi amp and then press Select 6 Press Up or Down to move to the second line and then press Select 7 Press Up or Down to change the fi to Y and then press Select The PS 1 updates its firmware During the update the scale head beeps When the update is complete the scale head returns to the main display 8 Remove the PS 1 Updater 9 Verify that the scale head functions properly 10 Replace the cover and then tighten the four screws To update the firmware using the power off method 1 Loosen the four screws in the PS 1 enclosure and then gently open the cover Make sure not to disconnect the ribbon cable 2 Insert the PS 1 Updater onto the connector marked CONS on the top left of the bottom circuit board Switch off the power to the PS 1 for at least five seconds 4 Switch on the power to the PS 1 The PS 1 updates its firmware During the u
3. pdate the scale head beeps When the update is complete the scale head goes to the main display 5 Remove the PS 1 Updater 6 Verify that the scale head operates properly 7 Close the cover and then tighten the four screws Phason Inc 2 Terracon Place Winnipeg Manitoba Canada Phone 204 233 1400 E mail support phason ca R2J 4G7 Fax 204 233 3252 Web site www phason ca 2 2006 09 06
Download Pdf Manuals
Related Search