User manual
Contents
1. 24 Cleaning or Replacing the Filters 24 Cleaning the Tubing 24 Service 24 Additional Notices 25 Specifications 26 Disposal 27 EMC Information 27 Limited Warranty Back Page 1 User Manual Intended Use The Philips R2. 10 Bluetooth Wireless Technology 14 Check Mask Fit 15 Sleep Progress 15 Altitude Compensation 15 Device Alerts 16 Troubleshooting 20 Accessories 22 Traveling with the System 23 Cleaning the Device
3. 3 System Overview 4 Installing Replacing the Air Filters 5 Where to Place the Device 6 Supplying AC Power to the Device 6 Connecting the Breathing Circuit 7 Navigating the Device Screens 8 Starting the Device 8 Menu Navigation Therapy ON and Optional Humidification Settings 9 Ramp Feature 9 Menu Navigation Therapy OFF
4. which means the device will only display icons on the interface Check Mask Fit This feature allows you to check the fit of your mask prior to starting therapy This is done by measuring the amount of leak Modem Allows you to turn modem off temporarily or turn it back on When modem is turned off it will automatically turn on again after 3 days Only displays when modem is installed Bluetooth Allows you to turn Bluetooth off and on Also it allows you to clear the pairing with a compatible Bluetooth device Time Allows you to adjust the time The default setting is Greenwich Mean Time but you may adjust the time in 30 minute increments to match your local time zone Note This time setting is not displayed as a clock function on the device It is only used to align your therapy data for your Provider s data reports 14 User Manual Bluetooth Wireless Technology Your device has Bluetooth wireless technology You can pair the therapy device to a mobile device that has the DreamMapper app installed DreamMapper is a mobile and web based system designed to help Obstructive Sleep Apnea OSA patients enhance their sleep therapy experience Pairing to your Bluetooth enabled Mobile Device Note You can only pair your therapy device to one mobile device at any given time Note Pairing works best when your therapy device and mobile device are in the same room Follow the steps below to manually pair to your mobile phone or tablet 1
5. Note For Australian and New Zealand customers this warranty replaces the warranty contained above 1 Respironics Inc a Philips Healthcare company warrants that the Products shall be free from defects of workmanship and materials and will perform in accordance with the Product specifications 2 This warranty is valid for a period of two 2 years from the date of purchase from an authorised Respironics dealer 3 If the Product is found to contain a defect of workmanship or materials or fails to perform in accordance with the Product specifications during the applicable warranty period Respironics will repair or replace at its option the defective material or part 4 The customer is responsible for returning the product to an authorised Philips Respironics dealer and collecting the product from the authorised Philips Respironics dealer after repair or replacement at its own cost Philips Respironics is responsible only for the freight cost of transporting the product between the authorised Philips Respironics dealer and Respironics Respironics reserves the right to charge an evaluation and postage fee for any returned Product as to which no problem is found following investigation 5 This warranty does not cover damage caused by accident misuse abuse alteration and other defects not related to materials or workmanship 6 The warranty provided by Respironics herein is not transferrable by the Buyer in the event of any sale or transfer of Products
6. nasal mask or full face mask with integrated exhalation port or Philips Respironics interface with a separate exhalation device such as the Whisper Swivel II Philips Respironics flexible tubing 1 83 m 6 ft Philips Respironics headgear for the mask To connect your breathing circuit to the device complete the following steps 1 Connect the flexible tubing to the air outlet on the back of the therapy device Line up the connector 1 at the top of the heated tube to the top of the air outlet port on the back of the device 2 Press the tubing into place over the air outlet port until the tabs on the side of the tube click into place in the slots on the sides of the outlet port Note If you are using a standard tube not shown instead of a heated tube simply slide the tubing over the air outlet port on the therapy device Note If required connect a bacteria filter to the device air outlet and then connect the flexible tubing to the outlet of the bacteria filter When using the bacteria filter the device performance may be affected However the device will remain functional and deliver therapy 3 Connect the tubing to the mask For proper placement and positioning refer to the instructions that came with your mask Warning Do not pull or stretch the tubing This could result in circuit leaks Warning Inspect the tubing for damage or wear Discard and replace the tubing as necessary 4 Attach the headgear to the mask if neces
7. out before morning Water chamber was not full at start of session Mask leak is excessively high The ambient conditions are very dry cool Under most conditions a full water chamber should last for a typical sleep session However many factors impact water consumption including the ambient temperature and humidity in your bedroom your humidifier or heated tube settings the level of mask leak and the duration of your sleep session First make sure that the water chamber is filled to the maximum fill line at the start of your sleep session Check that your mask is fitted properly and adjust as needed to reduce mask leak to normal levels You may use the Check Mask Fit function to evaluate your mask fit Also confirm that the device humidifier humidifier seals and tube are connected properly and not leaking You may also choose to lower your humidifier and or heated tube settings or change the humidification mode from Fixed to Adaptive humidification mode to increase the time that your humidifier water will last I hear a leak or whistling sound coming from my therapy device or humidifier not related to mask leak The therapy device air inlet may be obstructed The humidifier or tube is not fully connected The humidifier seals are not fully seated or are missing Check therapy device air inlet is not obstructed and filters are clean and properly inserted Confirm that the device humidifier and tube are connecte
8. 0 5 cm H2O increments Maximum static pressure accuracy according to ISO 80601 2 70 2015 Pressure Static Accuracy 10 cm H2O 0 5 cm H2O Static pressure accuracy has a measurement uncertainty of 3 7 Maximum dynamic pressure variation according to ISO 80601 2 70 2015 Pressure 10 BPM 15 BPM 20 BPM lt 10 cm H2O 0 3 cm H2O 0 4 cm H2O 0 6 cm H2O 10 0 to 20 cm H2O 0 4 cm H2O 0 7 cm H2O 0 9 cm H2O Dynamic pressure accuracy has a measurement uncertainty of 4 3 Note All tests were performed with and without humidifier and with both 22 mm standard tube and 15 mm heated tube Maximum Flow Rate typical Test pressures cm H2O 4 0 8 0 12 0 16 0 20 0 22 mm tubing Measured pressure at the patient connection port cm H2O 2 4 6 8 10 8 14 7 18 6 Average flow at the patient connection port l min 137 0 151 0 150 0 160 0 170 0 15 mm tubing heated or non heated Measured pressure at the patient connection port cm H2O 2 9 6 8 10 8 14 7 18 7 Average flow at the patient connection port l min 139 0 139 0 139 0 146 0 151 0 Disposal Separate collection for electrical and electronic equipment per EC Directive 2012 19 EU Dispose of this device in accordance with local regulations EMC Information Your unit has been designed to meet EMC standards throughout its Service Life without additional maintenance There is always an opportunity to relocate your DreamStatio
9. cleaned filter Always ensure that the DC power cord securely fits into your therapy device prior to use Contact your home care provider or Philips Respironics to determine if you have the appropriate DC cord for your specific therapy device When DC power is obtained from a vehicle battery the device should not be used while the vehicle s engine is running Damage to the device may occur Only use a Philips Respironics DC Power Cord and Battery Adapter Cable Use of any other system may cause damage to the device Contraindications When assessing the relative risks and benefits of using this equipment the clinician should understand that this device can deliver pressures up to 20 cm H2O In the event of certain fault conditions a maximum pressure of 40 cm H2O is possible Studies have shown that the following pre existing conditions may contraindicate the use of CPAP therapy for some patients Bullous Lung Disease Pathologically Low Blood Pressure Bypassed Upper Airway Pneumothorax Pneumocephalus has been reported in a patient using nasal Continuous Positive Airway Pressure Caution should be used when prescribing CPAP for susceptible patients such as those with cerebral spinal fluid CSF leaks abnormalities of the cribriform plate prior history of head trauma and or pneumocephalus Chest 1989 96 1425 1426 The use of positive airway pressure therapy may be temporarily contraindicated if you exhibit signs of a si
10. device from power Reattach power cord to restore power If the alert continues to occur contact your home care provider Incorrect Power Supply Notification Indicates an incompatible power supply is attached Incompatible power supply or power cord is not fully inserted into device s power inlet Confirm power cord is fully inserted into device s power inlet Confirm a compatible Philips Respironics power supply is attached Switch to compatible power supply if needed Low Voltage Notification Low voltage Incompatible power supply is attached Confirm a compatible Philips Respironics power supply is attached Switch to compatible power supply if needed If battery is being used ensure battery is adequately charged 19 User Manual Alert Icon Type Description Possible Cause Action Automatic Off Status Displayed when therapy ends due to automatic off function The mask has been removed Put your mask back on confirm good fit and turn airflow on to resume therapy Inlet blocked Check filter Notification Blocked airway Blockage at device inlet Check device air inlet is not obstructed Check air filter s are installed properly and are clean replace if needed Low Leak Check Mask and Tube Notification Blocked airway Blockage at tube or mask Check tube is not crushed or folded such that air flow is restricted Check mask is attached properly and without any
11. dryers etc If the problem still occurs contact your home care provider for assistance The Ramp feature does not work when you press the Ramp button Your home care provider did not prescribe Ramp for you or your therapy pressure is already set to the minimum setting If Ramp has not been prescribed for you discuss this feature with your home care provider to see if they will change your prescription If your provider has enabled Ramp but the feature still does not work check the current pressure setting on the Therapy screen If the therapy pressure is set to the minimum setting 4 0 cm H2O or the Ramp starting pressure is the same as the therapy pressure the Ramp feature will not work Make sure that the ramp time setting is gt 0 The airflow is much warmer than usual The air filters may be dirty The device may be operating in direct sunlight or near a heater Clean or replace the air filters The temperature of the air may vary somewhat based on your room temperature Make sure that the device is properly ventilated Keep the device away from bedding or curtains that could block the flow of air around the device Make sure the device is away from direct sunlight and heating equipment If using the humidifier with the device check the humidifier settings Refer to the humidifier instructions to make sure the humidifier is working properly If the problem continues contact your home care provider The airflo
12. for this information Icon Text Description Therapy Hours This screen displays the amount of time the user is actually receiving therapy on the device for the most recent 1 day time frame It also displays the average amount of time the patient is actually receiving therapy over the last 7 days and 30 days AHI AHI This screen displays the nightly Apnea Hypopnea indices AHI value for the most recent 1 day time frame It also displays the average of these individual nightly AHI values over a 7 day and a 30 day time frame This screen only displays if your home care provider has enabled it Available on CPAP Pro and Auto CPAP devices Mask Fit Displays the value 100 minus Large Leak Large Leak is the percentage of time that the mask leak was so high that it is no longer possible for the device to identify respiratory events with statistical accuracy Displays the value for the most recent 1 day as well as the values over last 7 days and 30 days This screen only displays if your home care provider has enabled it Available on CPAP Pro and Auto CPAP devices Periodic Breathing Periodic Breathing Displays the percentage of time that the user experienced periodic breathing Displays the value for the most recent 1 day time frame as well as values for the last 7 days and 30 days If you observe a large increase in the percent of time in periodic breathing indicated her contact your home care provider for assistance This screen
13. main menu Note The screens shown throughout this manual are examples for reference only Actual screens may vary based upon device model and provider settings Starting the Device 1 Ensure power is supplied to the device The first screen to display will be the Philips Respironics logo followed by the device model screen and then the Home screen Home Screen The first time the device is powered on a pop up will prompt you to set the time on the device The default setting is Greenwich Mean Time but you may adjust the time in 30 minute increments to match your local time zone If you choose to skip this initial time setting the time can always be adjusted under the My Setup menu Note This time setting is not displayed as a clock function on the device It is only used to align your therapy data for your Provider s data reports 2 Put on your mask assembly Refer to the instructions supplied with the mask 3 Press the Therapy button on top of the device to turn on airflow and begin therapy The current delivered pressure will display on the screen 4 Make sure that no air is leaking from your mask If necessary adjust the mask and headgear until the air leak stops See the instructions provided with your mask for more information Note A small amount of mask leak is normal and acceptable Correct large mask leaks or eye irritation from an air leak as soon as possible 5 If you are using the device in a bed with a headboard
14. minimum as part of their training Before operating the device ensure that the SD card filter access door and the modem access door are both closed whenever any of the accessories such as the Link Module or Modem are not installed Refer to the instructions that came with your accessory Condensation may damage the device If this device has been exposed to either very hot or very cold temperatures allow it to adjust to room temperature operating temperature before starting therapy Do not operate the device outside of the operating temperature range shown in the Specifications Do not use extension cords with this device Make sure the filter area on the side of the device is not blocked by bedding curtains or other items Air must flow freely around the device for the system to work properly Do not place the device directly onto carpet fabric or other flammable materials Do not place the device in or on any container that can collect or hold water A properly installed undamaged Philips Respironics blue pollen filter is required for proper operation Tobacco smoke may cause tar build up within the device which may result in the device malfunctioning Dirty inlet filters may cause high operating temperatures that may affect device performance Regularly examine the inlet filters as needed for integrity and cleanliness Never install a wet filter into the device You must ensure sufficient drying time for the
15. obstruction Check Mask Fit n a Status Displayed when Check Mask Fit function is enabled from Patient Menu n a This alert can be cleared by pressing the Control Dial Otherwise it will time out after 60 seconds Loading Language and Rebooting Status Displayed when a new language is selected from the menu n a No action needed Times out when complete Busy Status Displayed when the device is temporarily inaccessible due to data communication n a No action needed Sleep Progress n a Status Displays last 3 nights of hourly use n a Press Control Dial to acknowledge and clear the screen Otherwise message times out after 30 seconds 20 User Manual Troubleshooting Your device is equipped with a self diagnostic tool call Performance Check This tool can evaluate your device for certain errors It also allows you to share key device settings with your Provider Use Performance Check when directed by your provider The table below lists some of the problems you may experience with your device and possible solutions to those problems Problem Why It Happened What To Do Nothing happens when you apply power to the device The backlights on the buttons do not light There s no power at the outlet or the device is unplugged If you are using AC power check the outlet and verify that the device is properly plugged in Make sure there is power available at the outlet Make sure the
16. only displays if your home care provider has enabled it Available on CPAP Pro and Auto CPAP devices 11 User Manual Preheat Preheat On Screen Preheat Off Screen When using a humidifier the device can preheat the water tank for up to 30 minutes prior to starting therapy In order to activate the preheat mode the blower must be off and a humidifier must be attached When Preheat is selected you will be able to turn the control dial to choose between on or off Press the control dial again to make your selection During the 30 minute preheat you will still be able to use the control dial to select other menu options from the Home screen Note This screen only displays when a humidifier is attached My Provider When you select My Provider you will be able to view the following screens You cannot change settings in the Provider menu These screens are only for reference Your home care provider may periodically ask you for this information Icon Text Description Device Info This screen displays your therapy device information serial number model and software version Provider Contact Info This screen will display the contact information for your provider if it has been uploaded to your device Phone In This screen displays the total therapy hours for the device the total blower hours the total number of days used when the sessions were greater than 4 hours and a compliance check numb
17. AC power cord is connected correctly to the power supply and the power supply cord is securely connected to the device s power inlet If the problem continues to occur contact your home care provider Return both the device and power supply to your provider so they can determine if the problem is with the device or power supply If you are using DC power make sure your DC power cord and battery adaptor cable connections are secure Check your battery It may need recharged or replaced If the problem persists check the DC cord s fuse following the instructions supplied with your DC cord The fuse may need to be replaced If the problem still occurs contact your home care provider The airflow does not turn on There may be a problem with the blower Make sure the device is powered correctly Make sure the Home screen appears on the user interface Press the Therapy button on top of the device to start airflow If the airflow does not turn on there may be a problem with your device Contact your home care provider for assistance The device s display is erratic The device has been dropped or mishandled or the device is in an area with high Electromagnetic Interference EMI emissions Unplug the device Reapply power to the device If the problem continues relocate the device to an area with lower EMI emissions away from electronic equipment such as cellular phones cordless phones computers TVs electronic games hair
18. Electromagnetic Environment Guidance RF emissions CISPR 11 Group 1 The device uses RF energy only for its internal function Therefore its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment RF emissions CISPR 11 Class B The device is suitable for use in all establishments including domestic establishments and those directly connected to the public low voltage power supply network Harmonic emissions IEC 61000 3 2 Class A Voltage fluctuations Flicker emissions IEC 61000 3 3 Complies Emission of Radio Frequency Energy RTCA DO 160G Section 21 Category M This device is suitable for use onboard commercial airplanes inside passenger cabin Guidance and Manufacturer s Declaration Electromagnetic Immunity This device is intended for use in the electromagnetic environment specified below The user of this device should make sure it is used in such an environment Immunity Test IEC 60601 Test Level Compliance Level Electromagnetic Environment Guidance Electrostatic Discharge ESD IEC 61000 4 2 8 kV contact 15 kV air 8 kV contact 15 kV air Floors should be wood concrete or ceramic tile If floors are covered with synthetic material the relative humidity should be at least 30 Electrical fast Transient burst IEC 61000 4 4 2 kV for power supply lines 1 kV for input output lines 2 kV for supply mains 1 kV for input output lines M
19. Energy IEC 60601 1 Classification Type of Protection Against Electric Shock Class II Equipment Degree of Protection Against Electric Shock Type BF Applied Part Degree of Protection against Ingress of Water Device Drip Proof IP22 Link Module Drip Proof IP22 80W power supply Drip Proof IP22 Mode of Operation Continuous Electrical AC Power Consumption with 80W power supply 100 240 VAC 50 60 Hz 2 0 1 0 A Note Power supply is part of the medical electrical equipment DC Power Consumption 12 VDC 6 67 A Fuses There are no user replaceable fuses Radio Specifications Operating Frequency Range 2402 2480 MHz Maximum Output Power 4 0 dBm Modulation GFSK P 4 DQPSK 8DQPSK Intake Port Filters Pollen Filter 100 Polyester 88 Efficient 7 10 micron size Ultra fine Filter Blended Synthetic Fiber 95 Efficient 0 5 0 7 micron size Declared Dual Number Noise Emissions Values In accordance with ISO 4871 The A weighted sound pressure level is Device 25 8 dB A with and uncertainty of 2 dB A Device with Humidifier 27 9 dB A with and uncertainty of 2 dB A The A weighted sound power level is Device 33 8 dB A with an uncertainty of 2 dB A Device with Humidifier 35 9 dB A with an uncertainty of 2 dB A Note Values determined according to noise test code given in ISO 80601 2 70 2015 using the basic standards ISO 3744 and ISO 4871 27 User Manual Pressure Accuracy Pressure Increments 4 0 to 20 0 cm H2O in
20. To pair to your mobile device first ensure that the Bluetooth setting is turned ON on your mobile device Refer to your mobile device s instruction manual for more information 2 If you need to select from a list of available Bluetooth devices the therapy device will appear as PR BT XXXX XXXX will be the last four digits of the serial number listed on your therapy device 3 When your therapy device is powered up but the blower is off initiate pairing from your mobile device 4 If your mobile device is in range one of the following two steps will apply Your mobile device has Bluetooth Secure Simple Pairing SSP The following icon will pop up on your therapy device screen with a 6 digit number and Pair This number is a six digit passkey generated during SSP Verify that the six digit SSP passkey is the same on both the mobile device and therapy device Rotate the Control Dial between yes or no and then press the Control Dial to choose If no is selected or the pop up screen times out after 30 seconds the device will reject the pair request If yes is selected the therapy device will acknowledge the six digit SSP passkey If the mobile device also acknowledges the request the two will now be paired and ready to connect using DreamMapper Your Bluetooth enabled mobile device does not support Bluetooth SSP Your mobile device will prompt you to enter a pin code Enter 1008 on your mobile device T
21. User manual DreamStation CPAP DreamStation CPAP Pro DreamStation Auto CPAP 2015 Koninklijke Philips N V All rights reserved Table of Contents Intended Use 1 Important 1 Warnings 1 Cautions 2 Contraindications 2 Symbol Key 3 System Contents 3 How to Contact Philips Respironics
22. When DC power is obtained from a vehicle battery the device should not be used while the vehicle s engine is running Damage to the device may occur Caution Only use a Philips Respironics DC Power Cord and Battery Adapter Cable Use of any other system may cause damage to the device Refer to the instructions supplied with the DC power cord and adapter cable for information on how to operate the device using DC power Traveling with the System When traveling the carrying case is for carry on luggage only The carrying case will not protect the system if it is put through checked baggage If traveling with the optional humidifier do not travel with water in the water tank For your convenience at security stations there is a note on the bottom of the device stating that it is medical equipment and is suitable for airline use It may be helpful to bring this manual along with you to help security personnel understand the DreamStation device If you are traveling to a country with a line voltage different than the one you are currently using a different power cord or an international plug adaptor may be required to make your power cord compatible with the power outlets of the country to which you are traveling Contact your home care provider for additional information Airline Travel The device is suitable for use on airlines when the device is operating from an AC or DC power source Note It is not suitable for airline use with any of the modems or h
23. ains power quality should be that of a typical home or hospital environment Surge IEC 61000 4 5 1 kV differential mode 2 kV common mode 1 kV differential mode 2 kV for common mode Mains power quality should be that of a typical home or hospital environment Voltage dips short interruptions and voltage variations on power supply input lines IEC 61000 4 11 lt 5 UT gt 95 dip in UT for 0 5 cycle at 45 degree increments 70 UT 30 dip in UT for 0 5 seconds lt 5 UT gt 95 dip in UT for 5 seconds lt 5 UT gt 95 dip in UT for 0 5 cycle at 45 degree increments 70 UT 30 dip in UT for 0 5 seconds lt 5 UT gt 95 dip in UT for 5 seconds Mains power quality should be that of a typical home or hospital environment If the user of the device requires continued operation during power mains interruptions it is recommended that the device be powered from an uninterruptible power supply or a battery Power frequency 50 60 Hz magnetic field IEC 61000 4 8 30 A m 30 A m Power frequency magnetic fields should be at levels characteristic of a typical location in a typical hospital or home environment NOTE UT is the a c mains voltage prior to application of the test level Guidance and Manufacturer s Declaration Electromagnetic Immunity This device is intended for use in the electromagnetic environment specified below The user of this device should make sure it is used in su
24. allowing you to fall asleep more comfortably If ramp is enabled on your device after you turn on the airflow press the Ramp button on the top of the device You can use the Ramp button as often as you wish during the night When you click the ramp button the Therapy screen will change to reflect the Ramp pressure and the green circle will reflect the gradual increase in pressure Ramp Pressure Screen Your device has two ramp modes Your Provider will select the one that is most appropriate for you The standard ramp mode increases pressure at a steady rate Alternately the SmartRamp mode maintains a constant lower pressure until the device detects that you require more pressure 10 User Manual Menu Navigation Therapy OFF From the Home screen you can scroll between the following four options My Info Preheat My Provider My Setup My Info This menu provides summary statistics of your therapy use Preheat This function lets you warm up your humidifier for 30 minutes before starting a therapy session My Provider This menu contains information that your provider may direct you to read to them so they can better assist you over the phone My Setup This menu contains comfort settings that you can adjust as needed My Info When you select My Info you will be able to view the following screens You cannot change settings in the Info menu These screens are only for reference Your home care provider may periodically ask you
25. arantees Act 1993 New Zealand Our goods come with guarantees that cannot be excluded under the Consumer Guarantees Act 1993 This guarantee applies in addition to the conditions and guarantees implied by that legislation 1121981 1121981 R00 JR 7 01 2015 EN INTL 1 1 2 1 9 8 1 R 0 0
26. ble parts and materials not recommended by Philips Respironics Incompatible parts or accessories can result in degraded performance Use only approved cables and accessories Misuse may affect EMC performance and should be avoided The Health Industry Manufacturers Association recommends that a minimum separation of six inches be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker The DreamStation on board Bluetooth communication should be considered a wireless phone in this regard Use only power cords supplied by Philips Respironics for this device Use of power cords not supplied by Philips Respironics may cause overheating or damage to the device and may result in increased emissions or decreased immunity of the equipment or system The device should not be used while stacked or in close approximation to other non approved devices Do not pull or stretch the tubing This could result in circuit leaks Inspect the tubing for damage or wear Discard and replace the tubing as necessary 2 User Manual Periodically inspect electrical cords and cables for damage or signs of wear Discontinue use and replace if damaged To avoid electrical shock always unplug the power cord from the wall outlet before cleaning the device DO NOT immerse the device in any fluids If the device is used by multiple persons such as rental devices a low resistance main flow bacteria filt
27. ch an environment Immunity Test IEC 60601 Test Level Compliance Level Electromagnetic Environment Guidance Conducted RF IEC 61000 4 6 Radiated RF IEC 61000 4 3 3 Vrms 150 kHz to 80 MHz 6 Vrms Amateur Radio amp ISM Bands between 150 kHz and 80 MHz 10 V m 80 MHz to 2 7 GHz 3 Vrms 150 kHz to 80 MHz 6 Vrms Amateur Radio amp ISM Bands between 150 kHz and 80 MHz 10 V m Portable and mobile RF communications equipment should be used no closer to any part of the device including cables than the recommended 30 cm separation distance Interference may occur in the vicinity of equipment marked with the following symbol Limited Warranty Respironics Inc warrants that the system shall be free from defects of workmanship and materials and will perform in accordance with the product specifications for a period of two 2 years from the date of sale by Respironics Inc to the dealer If the product fails to perform in accordance with the product specifications Respironics Inc will repair or replace at its option the defective material or part Respironics Inc will pay customary freight charges from Respironics Inc to the dealer location only This warranty does not cover damage caused by accident misuse abuse alteration water ingress and other defects not related to material or workmanship The Respironics Inc Service department shall examine any devices returned for service and Respironics Inc re
28. d This alert will not occur during therapy Alert 2 These alerts consist of the pop up screen a blinking Power LED and an audible beep when displayed This alert can occur during therapy Safe State These alerts consist of the pop up screen a blinking Power LED and a repeating audible beep Note Status alerts automatically time out after 30 seconds and their pop up screens disappear All other alerts must be acknowledged to clear Alert Summary Table The following table summarizes the alerts Alert Icon Type Description Possible Cause Action Data Activity Do not remove SD card Status SD card read write underway n a No action needed Change Accepted Status Confirms acceptance of prescription change or device upgrade n a No action needed EZ Start Pressure Incremented to xx x Status Displays when EZ Start mode is enabled and device is increasing therapy pressure setting for the next session n a No action needed Oximetry Good Connection icon only Status Displays on the therapy screen when the blower is on and 3 seconds of good connection is detected Appears at the beginning of therapy This screen will not display again if the finger probe is removed and reapplied unless therapy is stopped and restarted n a No action needed Pair 123456 Yes No Status Prompts to accept or decline pairing to a Bluetooth compatible device This device can be identified by the
29. d properly and not leaking Confirm that the humidifier lid seal and dry box seal are present and properly seated if needed gently press around the perimeter of the seals to reseat them I accidentally spilled water into my humidifier basin The water chamber has been filled beyond the maximum fill line A small amount of water spilled in the basin of the humidifier will not harm your device A small spill in the humidifier will evaporate under normal humidifier use However too much water in the humidifier basin could spill over the humidifier lid hinge and might damage your furniture Disconnect power from the device Remove the water chamber pour out any excess water until the water level is at or below the maximum fill line and set the chamber aside Separate the humidifier from the therapy device and pour out the spilled water Once the heater plate has cooled wipe the inside of the humidifier with a paper towel or soft cloth If needed dry the underside of the humidifier and confirm that your table top is dry Reconnect the humidifier and power supply and reinstall the water chamber 22 User Manual Accessories There are several accessories available for your DreamStation system such as a Humidifier Cellular Modem Wi Fi Accessory or a Link Module Contact your home care provider for additional information on the available accessories When using optional accessories always follow the instructions enclosed with the accessori
30. digits displayed n a Rotate control dial to accept pairing Yes or decline No then press control dial to confirm selection 17 User Manual Alert Icon Type Description Possible Cause Action SD Card Removed Notification or Alert 2 Indicates SD card has been removed from therapy device and not reinserted before the start of the current therapy session SD card was not reinserted into device Reinsert SD card or click to clear alert Oximetry Good Study icon only Notification Notifies that user has a achieved at least 4 hours of therapy and oximetry use Appears at the end of therapy n a Press Control Dial to acknowledge and clear the message SD Card Error Remove and Reinsert Notification SD card error detected Device cannot read the SD card A problem may exist with the SD card or it was ejected during a writing activity or it was inserted incorrectly Remove SD card and reinsert If alert continues to occur replace with another card or contact your provider SD Card Full Notification SD card is full SD card is full Remove SD card and replace with a new card or contact your provider for a new SD card Patient Message Refer to section Notification Message from your Provider n a Press Control Dial to acknowledge and clear the message Change Rejected Alert 1 A prescription or settings change was rejected Change missing or incorrect Con
31. e dealer of the device for help Notice Any changes or modifications made to the device that are not expressly approved by Respironics may void the user s authority to operate the equipment Respironics Inc declares that this Class 2 Bluetooth 4 0 low energy and 2 1 EDR compliant device is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Note You may request a Declaration of Conformity for this product from the Regulatory Affairs Department by contacting Product Support at 1 724 387 4000 or 49 8152 93060 26 User Manual Specifications Environmental Operating Temperature 5 to 35 C 41 to 95 F Storage Temperature 20 to 60 C 4 to 140 F Relative Humidity operating amp storage 15 to 95 non condensing Atmospheric Pressure 101 to 77 kPa 0 2286 m 0 7500 ft Physical Dimensions 15 7 x 19 3 x 8 4 cm 6 2 L x 7 6 W x 3 3 H Weight Device with power supply Approximately 1 33 kg 2 94 lbs Service Life The expected service life of the DreamStation Therapy Device and Link Module is 5 years Standards Compliance This device is designed to conform to the following standards IEC 60601 1 General Requirements for Basic Safety and Essential Performance of Medical Electrical Equipment ISO 80601 2 70 Sleep Apnea Breathing Therapy Equipment EN 60601 1 2 Electromagnetic Compatibility RTCA DO 160G section 21 category M Emission of Radio Frequency
32. er should be installed in line between the device and the circuit tubing to prevent contamination Be sure to route the power cord to the outlet in a way that will prevent the cord from being tripped over or interfered with by chairs or other furniture This device is activated when the power cord is connected For safe operation when using a humidifier the humidifier must always be positioned below the breathing circuit connection at the mask The humidifier must be level for proper operation Note Please see the Limited Warranty section of this manual for information on warranty coverage Cautions A Caution indicates the possibility of damage to the device Medical electrical equipment needs special precautions regarding EMC and needs to be installed according to EMC information Contact your home care provider regarding EMC installation information Mobile RF communications equipment can affect medical electrical equipment Pins of connectors marked with the ESD warning symbol shall not be touched and connections shall not be made without special precautions Precautionary procedures include methods to prevent build up of electrostatic charge e g air conditioning humidification conductive floor coverings non synthetic clothing discharging one s body to the frame of the equipment or system or to earth It is recommended that all individuals that will handle this device understand these precautionary procedures at a
33. er used by your home care provider to validate that the data provided by you is the data taken from this screen A TRIAL A Trial If Auto Trial mode is available this screen displays Days xx xx where xx xx is the number of accumulated trial days number of selected trial days Available on the Auto CPAP device 90 Pressure 90 Pressure This screen displays the nightly value of 90 Pressure for the most recent 1 day time frame It also displays the average of these individual nightly values of 90 Pressure over a 7 day and a 30 day time frame Available on the Auto CPAP device 12 User Manual Icon Text Description Upload Allows user to initiate a modem call when an optional Cellular Modem or Wi Fi Accessory is installed After the modem upload has finished the screen will either display a green checkmark with the text Completed to indicate a successful upload or a red X with the text Failed to indicate an unsuccessful upload If the upload fails initiate an upload a second time or contact your home care provider if the issue persists This screen is locked if modem is off Performance Check Your device is equipped with a self diagnostic tool called Performance Check This tool can evaluate your device for certain errors It also allows you to share key device settings with your home care provider Use Performance Check when directed to by your home care provider At conclusion of the scan the screen displa
34. erformance of the device The red X indicates that the leak may affect device performance however the device will remain functional and deliver therapy Check Mask Fit Screen Note If you choose to try to improve your mask fit you can stop therapy adjust the fit of your mask and rerun the Check Mask Fit Refer to the instructions that came with your mask and headgear for the proper fitting procedure Sleep Progress Your device provides summary information about your therapy use each time the therapy is turned off The screen displays your Three Night Summary It shows your nightly usage for the last 3 sleep sessions measured in 24 hour periods ending at noon each day The most recent session is displayed in the right hand bar labeled with the number of hours slept A green bar indicates that you slept more than 4 hours and a yellow bar indicates less than 4 hours of use Three Night Summary Screen Altitude Compensation This device automatically compensates for altitude up to 7 500 feet No manual adjustment is necessary 16 User Manual Device Alerts Device alerts are pop ups that show up on the UI screen There are 5 types of alerts described here Status These alerts are just the pop up screen Notification These alerts consist of the pop up screen in addition to a blinking Power LED on top of the device Alert 1 These alerts consist of the pop up screen a blinking Power LED and an audible beep when displaye
35. es Caution Pins of connectors should not be touched Connections should not be made to these connectors unless ESD precautionary procedures are used Precautionary procedures include methods to prevent build up of electrostatic charge e g air conditioning humidification conductive floor coverings non synthetic clothing discharging one s body to the frame of the equipment or system or to earth or a large metal object and bonding oneself by means of a wrist strap to the equipment or system or to earth Adding a Humidifier with or without Heated Tubing You can use the heated humidifier and the heated tube with your device They are available from your home care provider A humidifier may reduce nasal dryness and irritation by adding moisture to the airflow Warning For safe operation the humidifier must always be positioned below the breathing circuit connection at the mask The humidifier must be level for proper operation Note Refer to the humidifier s instructions for complete setup information Using the SD Card The DreamStation system comes with an SD card inserted in the SD card slot on the side of the device to record information for the home care provider Your home care provider may ask you to periodically remove the SD card and send it to them for evaluation Using the DreamStation Link Module The Link Module is able to receive oximetry data and transfer it to the therapy device for home use or in a laboratory setting For use in a
36. espironics DreamStation systems deliver positive airway pressure therapy for the treatment of Obstructive Sleep Apnea in spontaneously breathing patients weighing over 30 kg 66 lbs It is for use in the home or hospital institutional environment Important The device is to be used only on the instruction of a licensed physician Your home care provider will make the correct pressure settings and device configurations including accessories according to your health care professional s prescription Several accessories are available to make your OSA treatment with the DreamStation system as convenient and comfortable as possible To ensure that you receive the safe effective therapy prescribed for you use only Philips Respironics accessories Warnings A warning indicates the possibility of injury to the user or the operator This manual serves as a reference The instructions in this manual are not intended to supersede the health care professional s instructions regarding the use of the device The operator should read and understand this entire manual before using the device This device is not intended for life support The device should be used only with masks and connectors recommended by Philips Respironics or with those recommended by the health care professional or respiratory therapist A mask should not be used unless the device is turned on and operating properly The exhalation port s associated with the mask should never be b
37. evice for the system to work properly Caution Do not place the device directly onto carpet fabric or other flammable materials Caution Do not place the device in or on any container that can collect or hold water Supplying AC Power to the Device Complete the following steps to operate the device using AC power 1 Plug the socket end of the AC power cord included into the power supply also included 2 Plug the pronged end of the AC power cord into an electrical outlet that is not controlled by a wall switch Note Example only shown here Local electrical outlet and power cord may vary 3 Plug the power supply cord s connector into the power inlet on the side of the device 4 Verify that the plug at the side of the device at the power supply and at the electrical outlet are fully inserted This will help to ensure that a secure reliable electrical connection has been made Note If the following Incorrect Power Supply icon appears on the screen please repeat step 4 Important To remove AC power disconnect the power supply cord from the electrical outlet Warning Periodically inspect electrical cords and cables for damage or signs of wear Discontinue use and replace if damaged Caution Do not use extension cords with this device 7 User Manual Connecting the Breathing Circuit To use the system you will need the following accessories in order to assemble the recommended breathing circuit Philips Respironics interface
38. f non original manufacturer approved accessories may violate your local RF exposure guidelines and should be avoided Notice This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio TV reception or other devices which can be determined by turning the equipment on and off the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna on the radio TV or other device Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult th
39. ght Sensor Detects room light levels and adjusts brightness of the Display Screen 3 Ramp Button Activates the ramp feature during therapy 4 Door SD card amp Filter Access This door lifts open for access to the SD card and filter area 5 Display Screen This is the User Interface for the therapy device 6 Control Dial Turn the dial to scroll between options on the screen Press the dial to choose an option 7 Door Accessory Access This door lifts open for access to the optional accessories 8 Humidifier Connector Humidifier connects to the back of the therapy device The humidifier pin connector will attach here 9 Air Outlet Port Connect the tubing here 10 Power Inlet Connect the power cord here 5 User Manual Installing Replacing the Air Filters Caution A properly installed undamaged Philips Respironics blue pollen filter is required for proper operation The device uses a blue pollen filter that is washable and reusable and a light blue ultra fine filter that is disposable The reusable blue filter screens out normal household dust and pollens while the light blue ultra fine filter provides more complete filtration of very fine particles The reusable blue filter must be in place at all times when the device is operating The ultra fine filter is recommended for people who are sensitive to tobacco smoke or other small particles The reusable blue filter is supplied with the device A disposable light b
40. he following icon will pop up on your therapy device screen with the number 001008 and Pair Rotate the Control Dial between yes or no and then press the Control Dial to choose If no is selected or the pop up screen times out after 30 seconds the device will reject the pair request If yes is selected the therapy device will acknowledge the 001008 passkey If the mobile device also acknowledges the request the two will now be paired and ready to connect using DreamMapper Note Do NOT select yes on the pop up screen unless you are currently trying to pair your devices This will ensure that only your mobile device connects to your therapy device 15 User Manual Check Mask Fit The optional Check Mask Fit feature can be enabled or disabled by your home care provider This feature allows you to check the fit of your mask prior to starting therapy This is done by measuring the amount of leak Put on your mask assembly Refer to your mask instructions if needed Navigate to the Check Mask Fit screen under My Setup and press the control dial to initiate the check The device will deliver a test pressure while the screen counts down 40 seconds A green bar indicates good fit while a red bar indicates improvement is needed After the test normal therapy will start and the screen will either display a green checkmark or a red X The green checkmark indicates that the leak found allows for optimal p
41. laboratory setting the Link Module also includes an RS 232 or DB9 port to allow remote control of the DreamStation Sleep Therapy Device by a personal computer Note Please consult the instructions that accompany the Link Module for installation and removal Note There are no SpO2 alarms available Note Oximetry data is not displayed To clean the module remove the module from the therapy device Wipe the outside of the device with a cloth slightly dampened with water and a mild detergent Let the device dry completely before reinstalling into the therapy device Dispose of the module following the same disposal instructions for your therapy device Warnings If you notice any unexplained changes in the performance of this device if it has been dropped or mishandled if water is spilled into the enclosure or if the enclosure is broken discontinue use Contact your home care provider Repairs and adjustments must be performed by Philips Respironics authorized service personnel only Unauthorized service could cause injury invalidate the warranty or result in costly damage Do not use any accessories detachable parts and materials not recommended by Philips Respironics Incompatible parts or accessories can result in degraded performance 23 User Manual Adding Supplemental Oxygen Oxygen can be added to the patient circuit Please note the warnings listed below when using oxygen with the device Warnings When using ox
42. locked Explanation of the Warning The device is intended to be used with special masks or connectors that have exhalation ports to allow continuous flow of air out of the mask When the device is turned on and functioning properly new air from the device flushes the exhaled air out through the mask exhalation port However when the device is not operating enough fresh air will not be provided through the mask and exhaled air may be rebreathed If you are using a full face mask a mask covering both your mouth and your nose the mask must be equipped with a safety entrainment valve When using oxygen with this system the oxygen supply must comply with local regulations for medical oxygen Oxygen supports combustion Oxygen should not be used while smoking or in the presence of an open flame When using oxygen with this system turn the device on before turning on the oxygen Turn the oxygen off before turning the device off This will prevent oxygen accumulation in the device Explanation of the Warning When the device is not in operation and the oxygen flow is left on oxygen delivered into the tubing may accumulate within the device s enclosure Oxygen accumulated in the device enclosure will create a risk of fire When using oxygen with this system a Philips Respironics Pressure Valve must be placed in line with the patient circuit between the device and the oxygen source The pressure valve helps prevent the backflow of oxyge
43. lue ultra fine filter may also be included If your filter is not already installed when you receive your device you must at least install the reusable filter before using the device This device has an automatic air filter reminder Every 30 days the device will display a message reminding you to check your filters and replace them as directed Note This message is a reminder only The device does not detect the performance of the filters nor does it recognize when a filter has been cleaned or replaced 1 Lift up on the filter access door and swing open If replacing pull out the old filter assembly 2 If applicable place a clean reusable blue pollen filter 1 on top of a new optional disposable light blue ultra fine filter 2 and firmly snap them together 3 Place the new filter assembly back in the side of the therapy device Swing the door closed 6 User Manual Where to Place the Device Place the device on a firm flat surface somewhere within easy reach of where you will use it at a level lower than your sleeping position Make sure the device is away from any heating or cooling equipment e g forced air vents radiators air conditioners Note When positioning the device make sure that the power cable is accessible because removing power is the only way to turn off the device Caution Make sure the filter area on the side of the device is not blocked by bedding curtains or other items Air must flow freely around the d
44. n Therapy Device within an environment that contains other devices with their own unknown EMC behavior If you believe your unit is affected by locating it closer to another device simply separate the devices to remove the condition Pressure and Flow Accuracy The DreamStation Therapy Device is designed to perform within the pressure and flowrate accuracies specified in the user manual If you suspect that the pressure and or flow rate accuracy is affected by EMC interference remove power and relocate the device to another area If performance continues to be affected discontinue use and contact your home care provider SpO2 and Pulse Rate Accuracy The DreamStation Therapy Device is designed to capture the SpO2 and Pulse Rate oximetry data within the accuracy specification described in the sensor manufacture s instructions for use When 4 hours of successful oximetry data have been achieved the device indicates this to the user by displaying Oximetry Good Study If you suspect that your unit is affected by EMC interference remove power and relocate the device to another area If performance continues to be affected discontinue use and contact your home care provider 28 User Manual Guidance and Manufacturer s Declaration Electromagnetic Emissions This device is intended for use in the electromagnetic environment specified below The user of this device should make sure it is used in such an environment Emissions Test Compliance
45. n from the patient circuit into the device when the unit is off Failure to use the pressure valve could result in a fire hazard Do not connect the device to an unregulated or high pressure oxygen source Do not use the device in the presence of a flammable anaesthetic mixture in combination with oxygen or air or in the presence of nitrous oxide Do not use the device near a source of toxic or harmful vapors Do not use this device if the room temperature is warmer than 35 C 95 F If the device is used at room temperatures warmer than 35 C 95 F the temperature of the airflow may exceed 43 C 109 F This could cause irritation or injury to your airway Do not operate the device in direct sunlight or near a heating appliance because these conditions can increase the temperature of the air coming out of the device Contact your health care professional if symptoms of sleep apnea recur If you notice any unexplained changes in the performance of this device if it is making unusual or harsh sounds if it has been dropped or mishandled if water is spilled into the enclosure or if the enclosure is broken disconnect the power cord and discontinue use Contact your home care provider Repairs and adjustments must be performed by Philips Respironics authorized service personnel only Unauthorized service could cause injury invalidate the warranty or result in costly damage Do not use any accessories detacha
46. ning If you notice any unexplained changes in the performance of this device if it is making unusual or harsh sounds if it has been dropped or mishandled if water is spilled into the enclosure or if the enclosure is broken disconnect the power cord and discontinue use Contact your home care provider 25 User Manual Additional Notices Notice The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Philips Respironics is under license Other trademarks and trade names are those of their respective owners Notice The DreamStation Therapy Device transmits data between the therapy device and a mobile device but it does not store any of your personal data This connection between the therapy device and a mobile device is encrypted Notice This device contains a FCC certified Bluetooth radio module located on the main board Only the co location of this Bluetooth radio with the radio transceivers of the DreamStation Wi Fi Accessory and Cellular Modem has been FCC approved and is permitted For compliance with FCC RF exposure guidelines a minimum distance of 20 cm between the Wi Fi Accessory or the Cellular Modem and the user s body should be maintained during operation of one of those accessories together with the DreamStation Notice FCC ID THO1116426 Notice THO1116426 is the FCC ID of the FCC certified Bluetooth module contained in this device Notice Use o
47. nus or middle ear infection Not for use with patients whose upper airways are bypassed Contact your health care professional if you have any questions concerning your therapy 3 User Manual Symbol Key The following symbols may appear on the device power supply and accessories Symbol Definition Symbol Definition Consult accompanying instructions for use For Airline Use Complies with RTCA DO 160G section 21 category M AC Power Separate collection for electrical and electronic equipment per EC Directive 2012 19 EU DC Power Bluetooth symbol IP22 Drip Proof Equipment This device contains an RF transmitter Caution consult accompanying documents Oximeter Connection ESD Warning symbol Serial Connection Class II Double Insulated Avoid ultraviolet radiation Type BF Applied Part Do not disassemble For Indoor Use Only System Contents Your DreamStation system may include the following items Device SD card User manual Flexible tubing Carrying case Reusable blue pollen filter Power cord Disposable light blue ultra fine filter optional Power supply 1118499 Humidifier optional Note If any of these items are missing contact your home care provider How to Contact Philips Respironics Should you experience trouble with this equipment or require assistance setting up using or maintaining the device or accessories please contact your home care pr
48. ovider If you need to contact Philips Respironics directly call the Philips Respironics Customer Service department at 1 724 387 4000 or 49 8152 93060 You can also use the following addresses Respironics Inc 1001 Murry Ridge Lane Murrysville PA 15668 Respironics Deutschland Gewerbestrasse 17 82211 Herrsching Germany 4 User Manual System Overview The DreamStation CPAP is a Continuous Positive Airway Pressure therapy device designed for the treatment of Obstructive Sleep Apnea OSA The DreamStation CPAP Pro can also deliver CPAP check therapy and the DreamStation Auto CPAP can also deliver CPAP Check and Auto CPAP therapy Your home care provider will choose the appropriate pressure settings for you When prescribed for you the device provides several special features to help make your therapy more comfortable The ramp function allows you to lower the pressure when you are trying to fall asleep The air pressure will gradually increase until your prescription pressure is reached Also the Flex comfort feature provides you with pressure relief when you exhale during therapy Several accessories are also available for use with your device Contact your home care provider to purchase any accessories not included with your system This figure illustrates some of the device features described in the following table Device Feature Description 1 Therapy On Off Button Starts and stops the airflow for therapy 2 Ambient Li
49. purchased by the Buyer from an authorised Respironics dealer 7 To the extent permitted by law where the Buyer has the benefit of an implied guarantee under the Australian Consumer Law but the Product is not of a kind ordinarily acquired for personal domestic or household use or consumption Respironics liability shall be limited at the option of Respironics to the replacement or repair of the Product or the supply of an equivalent Product 8 To exercise your rights under this warranty contact your local authorised Philips Respironics dealer A list of all authorised dealers is available at the following link http www philips com au healthcare Alternatively you can make a claim under this warranty by contacting Respironics directly at Philips Electronics Australia Limited 65 Epping Road North Ryde NSW 2113 Australia Tel 1300 766 488 Email prcontact philips com 9 The following statement is provided to a Buyer who is a consumer under the Australian Consumer Law Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the good repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure 10 The following statement is provided to a Buyer who is a consumer under the Consumer Gu
50. r plate and tube temperature settings can still be adjusted on the device Therapy screen as normal 13 User Manual Icon Text Description Mask Type This setting allows you to adjust the level of air pressure relief based on the specific Philips Respironics mask Each Philips Respironics mask may have a System One resistance control setting Contact your home care provider if you cannot find this resistance setting for your mask Note If a lock icon is displayed on this screen it indicates that your provider has locked this setting and you cannot change it Tube Type This setting allows you to select the correct size diameter tubing that you are using with the device You can choose either 22 for the Philips Respironics 22 mm tubing or 15 for the Philips Respironics 15 mm tubing When using Heated Tubing the device will automatically change this setting to the appropriate tubing type 15H and you will not be able to change it Note Tubing is identified on the cuff with the tubing identifier symbol 15 22 or 15H Note If a lock icon is displayed on this screen it indicates that your provider has locked this setting and you cannot change it Language This feature allows you to choose which language to display on the interface You can choose between English German Spanish French Italian Brazilian Portuguese Danish Finnish Norwegian Swedish Czech or Polish You can also turn the language off 0
51. rom the device Refer to the Installing Replacing the Air Filters section of this manual 3 Examine the filter s for cleanliness and integrity 4 To clean the reusable blue pollen filter first detach the light blue ultra fine filter if applicable and set aside or dispose of as needed Then take the reusable filter to the sink turn it upside down and run warm tap water through the white filter media to rinse away any debris Next lightly shake the filter to remove as much water as possible Allow the filter to air dry completely before reinstalling it If the reusable blue pollen filter is torn replace it Only Philips Respironics supplied filters should be used as replacement filters 5 If the light blue ultra fine filter is dirty or torn replace it 6 Reinstall the filters Refer to the Installing Replacing the Air Filters section of this manual Caution Never install a wet filter into the device You must ensure sufficient drying time for the cleaned filter Cleaning the Tubing Clean the flexible tubing before first use and daily Disconnect the flexible tubing from the device For the 15 or 22 mm flexible tubing gently wash the tubing in a solution of warm water and a mild detergent Rinse thoroughly Air dry Inspect the tubing for damage or wear Discard and replace if necessary Note Refer to the humidifier manual for the instructions on how to clean the heated tube Service The device does not require routine servicing War
52. sary Refer to the instructions that came with your headgear Warning If you are using a full face mask a mask covering both your mouth and your nose the mask must be equipped with a safety entrainment valve Warning If the device is used by multiple persons such as rental devices a low resistance main flow bacteria filter should be installed in line between the device and the circuit tubing to prevent contamination 8 User Manual Navigating the Device Screens The User Interface UI on this device allows you to adjust the device settings and view information about your therapy The UI is comprised of the display screen and the control dial Rotate the control dial in either direction to scroll through the menu options on the display screen Note The display is not a touch screen You must use the control dial to navigate the device menu To adjust a setting 1 Rotate the control dial to your desired menu option 2 Press the control dial to select that setting 3 Rotate the control dial to change the setting 4 Press the control dial again to save the change Note The rotate dial icon on any screen indicates to rotate the dial to perform an action The click dial icon on any screen indicates to press the dial to perform an action Note Pressing the dial when the down arrow appears on any screen will take you to a sub menu with more menu options Pressing the dial when the up arrow appears on any sub menu will return you back to the
53. serves the right to charge an evaluation fee for any returned device as to which no problem is found after investigation by Respironics Inc Service This warranty is non transferable by unauthorized distributors of Respironics Inc products and Respironics Inc reserves the right to charge dealers for warranty service of failed product not purchased directly from Respironics Inc or authorized distributors Respironics Inc disclaims all liability for economic loss loss of profits overhead or consequential damages which may be claimed to arise from any sale or use of this product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you This warranty is given in lieu of all other express warranties In addition any implied warranties including any warranty of merchantability or fitness for the particular purpose are limited to two years Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state To exercise your rights under this warranty contact your local authorized Respironics Inc dealer or contact Respironics Inc at 1001 Murry Ridge Lane Murrysville Pennsylvania 15668 8550 1 724 387 4000 or Deutschland Gewerbestrasse 17 82211 Herrsching Germany 49 8152 93060
54. tact your provider Humidification Error Contact support if the problem persists Status Humidifier error only when humidifier is present Humidifier heater plate error or humidifier not properly connected to therapy device Turn off device and disconnect from power Detach the humidifier visually check that electrical contacts are clear then reconnect humidifier and power cord If alert continues contact your provider 18 User Manual Alert Icon Type Description Possible Cause Action Heated Tube Error Contact support if the problem persists Status Heated tube error only when heated tube is present Heated tube may be overheated or damaged Turn off device Detach heated tube from humidifier make sure that tube is not covered or obstructed and then reattach to humidifier If alert continues contact your provider The attached power supply does not support humidification Alert 2 Indicates that the attached power supply is not capable of supporting humidification or heated tube Incorrect power supply Switch to a Philips Respironics DreamStation power supply that is capable of supporting humidification Or operate therapy device without humidifier Service Required Safe State Indicates an error which enters device into Safe State This allows power to remain on but airflow is disabled Device error Press Control Dial to silence alert Disconnect
55. try placing the tubing over the headboard This may reduce tension on the mask 6 Press the Therapy button again to turn off therapy Note During therapy it there is a mains interruption i e power loss the device will return to the Home screen once power is restored You may resume therapy as needed 9 User Manual Menu Navigation Therapy ON and Optional Humidification Settings While the device is delivering therapy you can adjust Tube Temperature or Humidifier Settings Rotate the control dial to choose either setting Press and rotate the dial to change the setting Note If you are using the Humidifier without the Heated Tube simply just rotate the control dial to change the Humidifier setting Therapy Pressure Screen Feature Description 1 Therapy Pressure Displays the current delivered pressure 2 Adjustable Tube Temperature Setting You can change this setting from 0 to 5 Only displays when optional heated tube is connected 3 Adjustable Humidifier Setting You can change this setting from 0 to 5 Only displays when humidifier is attached 4 Enabled Features Depending on setup certain enabled therapy features will display here Ramp Feature The device is equipped with an optional ramp feature that your home care provider can enable or disable This feature reduces the air pressure when you are trying to fall asleep and then gradually increases ramps the pressure until your prescription setting is reached
56. umidifiers installed in the unit 24 User Manual Cleaning the Device Warning To avoid electrical shock always unplug the power cord from the wall outlet before cleaning the device DO NOT immerse the device in any fluids 1 Unplug the device and wipe the outside of the device with a cloth slightly dampened with water and a mild detergent Let the device dry completely before plugging in the power cord 2 Inspect the device and all circuit parts for damage after cleaning Replace any damaged parts Cleaning or Replacing the Filters Under normal usage you should clean the reusable blue pollen filter at least once every two weeks and replace it with a new one every six months The light blue ultra fine filter is disposable and should be replaced after 30 nights of use or sooner if it appears dirty DO NOT clean the ultra fine filter Caution Dirty inlet filters may cause high operating temperatures that may affect device performance Regularly examine the inlet filters as needed for integrity and cleanliness This device has an automatic air filter reminder Every 30 days the device will display a message reminding you to check your filters and replace them as directed Note This message is a reminder only The device does not detect the performance of the filters nor does it recognize when a filter has been cleaned or replaced 1 If the device is operating stop the airflow Disconnect the device from the power source 2 Remove the filter s f
57. w pressure feels too high or too low The Tubing type setting may be incorrect Make sure the Tubing type setting 22 or 15 matches the tubing that you are using Philips Respironics 22 or 15 mm tubing If you are using the Heated Tubing this setting will be 15H and you cannot change it 21 User Manual Problem Why It Happened What To Do Tube Temperature is turned on in Setup screen but Heated Tubing is not warm Incorrect power supply is being used Make sure the 80W power supply is being used or a compatible battery or DC cable is being used I m having difficulty adjusting the heated humidifier setting or the heated tube temperature setting The blower is not turned on or the humidifier or heated tube is not fully connected The humidifier setting and tube temperature settings can only be adjusted from the Therapy ON display screen Confirm that the blower is turned on and that the settings are visible on the right side of the screen then adjust to desired comfort If the blower is on but the humidifier settings are not displayed on the Therapy ON screen then unplug the device Confirm that the humidifier and or heated tube electrical contacts are not obstructed or damaged Then reconnect the humidifier and or heated tube and reconnect the device s power supply Turn the blower on if the settings are still not visible contact your provider for assistance The water in the water chamber runs
58. ygen with this system the oxygen supply must comply with local regulations for medical oxygen Oxygen supports combustion Oxygen should not be used while smoking or in the presence of an open flame When using oxygen with this system a Philips Respironics Pressure Valve must be placed in line with the patient circuit between the device and the oxygen source The pressure valve helps prevent the backflow of oxygen from the patient circuit into the device when the unit is off Failure to use the pressure valve could result in a fire hazard Note Refer to the pressure valve s instructions for complete setup information When using oxygen with this system turn the device on before turning on the oxygen Turn the oxygen off before turning the device off This will prevent oxygen accumulation in the device Do not connect the device to an unregulated or high pressure oxygen source Supplying DC Power to the Device A Philips Respironics DC power cord can be used to operate this device in a stationary recreational vehicle boat or motor home In addition a Philips Respironics DC battery adapter cable when used with a DC power cord allows the device to be operated from a 12 VDC free standing battery Caution Always ensure that the DC power cord securely fits into your therapy device prior to use Contact your home care provider or Philips Respironics to determine if you have the appropriate DC cord for your specific therapy device Caution
59. ys a green checkmark if no issue is detected If device displays a red X please contact your home care provider for assistance My Setup When you select My Setup you will be able to view the following screens You can change the settings in the Setup menu These screens will only display if they are available and enabled on your device Icon Text Description Ramp This displays the ramp starting pressure You can increase or decrease the ramp starting pressure in 0 5 cm H2O increments Flex This allows you to adjust the level of air pressure relief that you feel when you exhale during therapy Your home care provider can enable or disable this feature When your provider enables Flex a level will already be set for you on the device You can increase or decrease the setting from 1 to 3 The setting of 1 provides a small amount of pressure relief with higher numbers providing additional relief Note If a lock icon is displayed on this screen it indicates that your provider has locked this setting and you cannot change it Humidification This displays the Humidification Mode being used You can choose between Fixed or Adaptive Humidification If a heated tube is being used the device will automatically switch to Heated Tube Humidification Mode A lock symbol will appear next to the mode setting indicating that so long as the heated tube is attached to the device this mode cannot be changed However the heate
Download Pdf Manuals
Related Search