Home

620-100240E e3 User Programming Guide.indd

1. 3 Click Card Scan and present the i card or multiple cards to the reader Default Card Format Custom Vv 4 The new card format will populate tediatelds Card Format Name 3 bit card format Description Facility Code Start Bit Facility Code Length 5 Click Add to save the new format Oe sci cial Card Number Start Bit Card Number Length Facility Code Card Number gt 114587946254123585445 e3 eMerge User Programming Guide 82 Holiday Group Use Holiday Groups to define days and times during the year when holiday hours are used When the holiday starts the Controller switches from regular hours to holiday hours When the holiday ends the regular hours resume You can assign four holiday groups with up to 30 holidays total among the groups A holiday can include any number of consecutive days within the same calendar year The Controller has pre configured holiday groups based upon the country you selected in the Language section of the Wizard The holiday groups are pre configured through 2021 for quick set up X Wizard Language Schedule gt Holiday Group vV License Name Labor Day IV Card Format Start Date 09 07 2015 g End Date 09 07 2015 VW Holiday Group Holiday Group 1 No Holiday Group 2 No Holiday Group 3 No Holiday Group 4 No V at VV Door Start Date End Date Holiday Group Access Level Christmas Day 12 25 2015 12 25 2015 Thanksgiving Day 11 26 2015
2. j z C AUX Output ji Elevator Action Controller Region Door displays the doors that are assigned to the system Click on the door name for additional information pertaining to each door V NOTE When programming various elements of the system do not use the same name for multiple items e g use Door 1 Door 2 etc V NOTE Do not use special characters lt gt CRAON IN Editing a Door Select the desired door Scroll to the bottom of the page and click Edit After making any edits be sure to click Save at the bottom of the page Basic 1 Enter the desired Name and Description optional for the door 2 For multi floor installations select the Floor Reader 1 In the Reader section select the settings for the door s reader Door Contact 1 In the Door Contact section check the Enable checkbox if a door contact is used 2 Name the door contact and select its type 3 Adjust the Held Open Time which is the length of time the door can be open following a valid access request 4 The ADA Open Time is an additional time added to the Held Open Time Rex 1 Enter the Door Rex Name for the door s request to exit switch 2 Select the type of Rex switch 3 Check the Rex Activates Door Lock checkbox to have the Rex activate the door s lock Device Setting gt Door No Name Client Description Reader Function In Reader Name In Reader Type In Reader R
3. 4 Click Add to save the changes Editing a Door Group 1 Click on the Door Group name to edit Group Table gt Door Group 2 Click Edit No Door Group Name Door List 3 The Door Group name can be 1 Building 2 Door 3 Door 4 edited mie E 4 Doors can be added or removed from the group 5 Click Save Group Table gt Door Group Deleting a Door Grou Basic m a P Selecting a Door 1 Click on the Door Group name to EEEE Building 2 Telet Group to Edit Door List Door 3 Door 4 2 Click Delete Door Group Name Door List Building 2 Door 3 Door 4 Door Group Name VJ Group Table gt Door Group Basic wa Editing a Door Group fe No Door Group Name Door List 1 Building 2 Door 3 Door 4 Door Group Name VI nnnm e3 eMerge User Programming Guide 74 camera Group CBE Q G X Card Holder Group l DoorGroup lt gt CameraGroup Access Level Group The Camera Group allows individual cameras to be combined in groups Adding a Camera Group Group Table gt Camera Group 1 Click C ck New No Camera Group Name Camera List 2 Enter the desired camera Group Camera Group Name VP Name 3 For Camera List select the desired cameras or use the search icon to find a specific camera and click the REAA right arrow to move the cameras to Basic the field on the right Adding a Camera aes Group Name Parking Lot Cams V NOTE Cirl click or shift click will select
4. Access Control System User Programming Guide Document Number 620 100240 Rev E BDF NORTEK SECURITY amp CONTROL USA amp Canada 800 421 1587 amp 800 392 0123 760 438 7000 Toll Free FAX 800 468 1340 www nortekcontrol com Notices It is IMPORTANT that this instruction manual be read and understood completely before installation or operation is attempted It is intended that the installation of this unit will be performed only by persons trained and qualified in the installation of access control equipment The IMPORTANT safeguards and instructions in this manual cannot cover all possible conditions and situations which may occur during installation and use It must be understood that common sense and caution must be exercised by the person s installing maintaining and operating the equipment Standards Approvals This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment a residential area is likely to cause harmful interference in which case the user will be required to correct
5. Event Action allows the operator to create events that are assigned to actions For example the operator may assign a time schedule to an auxiliary output Adding an Event Action 1 Click New and enter a name and description Event Action gt Event Action Event Action Name Description Schedule 2 In the Basic section name the xa To Add an Event event fill in a Description and select a Schedule for the time the Event Action will be active Event 3 In the Event section click Insert to add a new event 4 Choose the type of equipment that pt DAA a can trigger the event action in the i Event Source Type dropdown 5 Under Where choose the event Event Source Type Reader What Event source location s by selecting the Where _ location s and clicking the right gms Access Denied Hazmat Locko arrow to move it to the field on the atom Paans Denied oie right Out Reader 4 st eae at 6 Under Event choose the event s to monitor by selecting the event s and clicking the right arrow to move it to the field on the right This is the event s that will trigger J ctor Source Type Action ee the action A02 Aux ee Action A0 4 Delay Output by 0 _ sec 7 In the Action section click Insert 8 Choose either Aux Output or System for the Action Source Type Aux Output e This is the auxiliary relay s that will and move it to the right by clicking the right arrow h System T Backunio FTP Server
6. s current status Card Type 8 Select the function for the card with card type dropdown Access Level 9 For Select Type select Individual or Group access level 10 For Select Level select the desired access levels or use the search icon to find a specific access level and click the right arrow to move the access level to the field on the right Activation Date 11 Choose an optional activation and expiration date for the card 12 Click Save to assign the card to the Card Holder The added card will show on the card list for the Card Holder Click Add Card to add additional cards for the selected Card Holder Card Enrollment Auto Sean Card Format Card Number Co Ee Key Number cisa E Card Type Stolen Inactive Card Enrollment Auto Scan l Card Format Card Number Key Number Card Status Card Type Select Type Individual Select Level Never Expired Activation Date gt 09 23 2015 Inactive Reason Expiration Date gt 12 31 2015 Card No Card Number Card Format Card Status Card Type 142 11 IEI 26 Bit Wiegand 92 e3 eMerge User Programming Guide Card Use Card to enter card numbers in the database and assign the card to a Card Holder Wizard IV eu Administration gt Card Card Holder vV License No V E Holiday Group V Schedule IV Door V Access Level ia Card Holder vV Network Dealer Registration fT
7. sign to display the system configuration information and upgrade options Current system information is shown on the left Upgrade options are shown on the right Select options from the two dropdown boxes Enter any comments to send with the request in the text box Click Request Upgrade to send in an upgrade request Press to View System Info System Information and Upgrade Options CURRENT SYSTEM CONFIGURATION DOOR amp SYSTEM UPGRADE OPTIONS System Enterprise Readers per system 128 Doors per system 64 Users per system 10 000 Access levels per person 32 Access cards 120 000 Cards per person 32 Card formats 32 Expansion modules 15 Alarm Input Points 224 Output Points 128 Online Event history log 100 000 transaction Enter comments here system Readers per system 128 Doors per system Users per system 10 000 Access levels per person 32 Access cards 120 000 Cards per person 32 Card formats 32 Expansion modules 15 Alarm Input Points 224 Output Points 128 Online Event history log 100 000 transaction 99 e3 eMerge User Programming Guide 8 End User License Agreement IMPORTANT THIS SOFTWARE END USER LICENSE AGREEMENT EULA IS A LEGAL AGREEMENT BETWEEN YOU EITHER AN INDIVIDUAL OR IF PURCHASED OR OTHERWISE ACQUIRED BY OR FOR AN ENTITY AN ENTITY AND NORTEK SECURITY amp CONTROL LLC READ IT CAREFULLY BEFORE USING THE SOFTWARE IT PROVIDES A LICENSE TO USE THE SOFTWARE AND CONTAINS WAR
8. 1 Core Group Card Holder Group Name V CT Monte Dezman Gerry Rumsfield Ronnie Gaverty Group Table gt Card Holder Group Selecting a Card Holder Group to Edit Card Holder List Group Name Core Group Card Holder List Monte Dezman Gerry Rumsfield Ronnie Gaverty No Card Holder Group Name 1 Core Group Monte Dezman Gerry Rumsfield Ronnie Gaverty Card Holder Group Name V oe Group Table gt Card Holder Group ang esate Holder Group Gerry Rumsfield Card Holder List Group Name Card Holder List Ronnie Gaverty No Card Holder Group Name 1 Core Group Monte Dezman Gerry Rumsfield Ronnie Gaverty Card Holder Group Name VE i sid 1 73 e3 eMerge User Programming Guide Door Group COOCOO A X Card Holder Group DoorGroup lt Camera Group Access Level Group The Door Group allows individual doors to be combined in groups The group can then be added to an Access Level for simpler management Group Table gt Door Group Adding a Door Group No Door Group Name Door List 1 Click New Door Group Name VI 2 Enter the desired door Group Name 3 For Door List select the desired doors or use the search icon to find ARIAS es a specific door and click the right SETE arrow to move the doors to the field F z Ez Adding a Door Group Name on the right oLa Group V NOTE Ctrl click or shift click will select multiple doors
9. Enter the HTTP Port number for remote Web browser connection typically 80 Check the HTTPS checkbox if RMC is being used If using HTTPS edit the port number if required default is 443 10 0 When finished entering the network settings click Save amp Reboot Upload cer key For installations using Hyper Text Transport Protocol Secure HTTPS communications the eMerge system uses a default security key and certificate If the installations network requires a different specific security key and certificate edit the two items 1 Click Upload cer key 2 Enter the Private Key into the SSL Toolbox 3 Enter the Certificate into the SSL Toolbox 4 Click Save amp Reboot e3 eMerge User Programming Guide 94 Dealer Registration Dealer Registration is highly recommended for maximum system support Please fill out the required information Wizard VV es eS Contact Information Installing Dealer required for upgrade requests icense 4 Company Name VEGGER E Address 1 Address 2 v Holiday Group City V Ea State n ZIP Code 4 weer Contact Name V Access Level Phone Number Card Holder E Mail Card required infomation VEE ape M Dealer Registration Company Name cL AdAennn 4 Start Save K Prev V NOTE Gateway and DNS IP addresses and SMTP must be configured to send the registration email Refer to iP iSeiipieT a S tie Regt sce tetas Address and SMTP to confirm th
10. Modify Delete User Role O View O Add Modify Delete 45 e3 eMerge User Programming Guide wi Web User Account Web User Account ene 2 User Def Field User Role A Web User Account Create or edit the Web User Accounts that are used to log into to the Controller Adding or Editing a Web User User Setting gt Web User Account 1 To add a new Web User click New To edit an existing Web User click Edit 2 Enter the User ID Password and Web User Name of the new user 3 Assign a User Role which defines the privilege level of the user No User ID Web User Name User Role 1 john john Super User use O U account 4 Enter the Language and Default Basic Page for the user User ID 5 Assign the Default Floor and Password enable Floor Show if the floor Jid eae Wee graphic will display to the user 6 Enter the Auto Disconnect Time which is the amount of time in hours before the Controller will automatically log out the user 7 Click Add or Save to save the Floor Show settings Auto Disconnect Time User Role Language Default Page Default Floor e3 eMerge User Programming Guide 46 Update Backup Restore T Save amp Reboot W Factory Default Updating the Firmware 1 Select the location of the firmware me file User PC SD Card or Update Software Version 0 32 07c Server 2 Clee Up Ante Update Type User PC SD Card Update Server Last Version un
11. Scroll down and click Save to save the changes e3 eMerge User Programming Guide 09 00 17 00 09 00 17 00 09 00 17 00 00 00 24 00 00 00 24 00 00 00 24 00 09 00 17 00 09 00 17 00 00 00 00 00 00 00 24 00 00 00 24 00 00 00 24 00 Weekly Employee gt 19 5 M F 84 x Reverse sl CL _ Holiday Group 1 Holiday Group 2 Holiday Group 3 Holiday Group 4 Doors Displays the Doors that are assigned to the system Click on the door name to view or edit each door Wizard Language Device Setting gt Door No Name Client Description Door Lock Mode v License Card Format vV Holiday Group V at Client 2 Client 2 Client 2 Client 2 Server Server Server Server eae N U A OD N amp Client Door 4 Client Door 3 Client Door 2 Client Door 1 Server Door Server Door Server Door Server Door Default Floor Default Floor Default Floor Default Floor Default Floor Default Floor Default Floor Default Floor a Access Level a Card Holder a Card Editing a Door Select the desired door Scroll to the bottom of the page and click Edit Device Setting gt Door After making any edits be sure to click Save at the bottom of the page Default Floor W Basic 1 Enter the desired Name and ee Reader Function In and Out Readers V Description optional for the door In Reader Name n Reader 1 2 For multi floor installations select Vv the Floor
12. _ Enable Grace i 1 min 0 999 Reset Violations Daily Time of Day All violations will be reset at the selected time Tailgate Violations Default Violation s Occupancy Limit Enforcement Default Violation Sot Vv Maximum Occupancy MISC Information DeadMan Region N l min 5 999 MI DeadMan Interval HazMat Region HazMat Aux Input 36 Region cont O a e a8 3 Ga G E Door jj Elevator C4 AUX Input C AUX Output Iiii Elevator Action a Controller jal Region Child Regions A Child Region follows the definition of a Region with these exceptions A Child Region cannot have an occupancy limit only a Parent or Sub Region can have an occupancy limit Device Setting gt Region The Card Holder does appear in the Child Region on the Occupancy ipti Report See Occupancy for more information Pisani Raijan Normally a Child Region will be fully JJ only Muster S contained within the Parent Region but the rules do not restrict this A Child Region is logically contained inside of it Parent Region This means if the Card Holder in the Child Region they are for occupancy in the Parent Region Anti PassBack and TailGating rules can be applied to Child Regions There is a maximum of 20 Child Regions per Region There is a maximum of 250 total Child Regions per system Child Region Notes Under the Region setting for the Door A Child of a Parent would be a Class 2 A Chi
13. amp CONTROL OR ITS REPRESENTATIVES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND EVEN IF A REMEDY SET FORTH HEREIN IS FOUND TO HAVE FAILED OF ITS ESSENTIAL PURPOSE 2 NORTEK SECURITY amp CONTROLS AND IT S LICENSORS AND SUPPLIERS TOTAL LIABILITY TO YOU FOR ACTUAL DAMAGES FOR ANY CAUSE WHATSOEVER WILL BE LIMITED TO THE AMOUNT PAID BY YOU FOR THE SOFTWARE THAT CAUSED SUCH DAMAGE 3 USA only SOME STATES DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OF CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM STATE TO STATE 4 THE FOREGOING LIMITATIONS ON LIABILITY ARE INTENDED TO APPLY TO ALL ASPECTS OF THIS EULA The Warranty Disclaimer and Limited Liability set forth above inure to the benefit of Nortek Security amp Control s licensors and suppliers i 10 11 Software Transfer Allowed But With Restrictions You may permanently transfer rights under this EULA only as part of a permanent sale or transfer of the Nortek Security amp Control product and only if the recipient agrees to this EULA If the Software is an upgrade any transfer must also include all prior versions of the Software U S GOVERNMENT RESTRICTED RIGHTS LEGEND This Software and the documentation are provided with RESTRICTED RIGHTS applicable to private and public licenses alike Without limiting the foregoing use duplication or d
14. down from the top edge Picture 6 Set the Card Holder Picture 100 pixels wide by 130 pixels high position on the badge The X Position is the number of pixels in from the left edge The Y Position is the number of pixels down from the top edge Text Fields 7 Enter names for the text fields in the Field ID boxes 8 Set each text field position with the X Position and Y Position settings 9 Set the Max Number of Characters for each of the text fields The field will be truncated to this length when it is populated from the database Save and Preview 10 Click Preview to look at the badge layout then adjust any design settings 11 When the badge layout is as desired click Save to save the layout 17 e3 eMerge User Programming Guide Badging Template j X Card Holder Card Format ig Access Level 2 Badging Layout a Badging Template A Badging Template is used to select which Card Holder data populates the text fields positioned on the badge by the Badging Layout Editing a Badge Template Badging Template 1 Choose a Badge Layout or Badge Template to edit with the Badge Template Module dropdown selectors A sample of the badge layout displays for reference Note The number of fields listed depends on the fields in the Badge Layout 2 For each of the text fields choose a Card Holder database field to populate the badge field 3 Click Save Template to store the template Choose a Layout Choose a Templa
15. 11 26 2015 Card Holder Veterans Day 11 11 2015 11 11 2015 Columbus Day 10 12 2015 10 12 2015 Labor Day 09 07 2015 09 07 2015 Independence Day observed 07 03 2015 07 03 2015 Memorial Day 05 25 2015 05 25 2015 Presidents Day Washington s Birthday 02 16 2015 02 16 2015 Martin Luther King Day 01 19 2015 01 19 2015 a Card Network Dealer Registration Start Save Editing a Holiday 1 Select the desired holiday and click ESETE Edit 2 Change the start date and end date to the desired date Name Labor Day 3 Rename the holiday it is a ogno72015 recommended that pre configured End Date 09 07 2015 holidays be renamed when edited C Holiday Group1 0 Holiday Group2 C Holiday Group3 C Holiday Group 4 4 Click Save Deleting a Holiday 1 Highlight the holiday to be deleted Start Date End Date Holiday Group 2 Click Delete A confirmation box 0 Christmas Day 12 25 2015 12 25 2015 will appear 39 Thanksgiving Day 11 26 2015 11 26 2015 38 Veterans Day 11 11 2015 11 11 2015 3 Click OK to confirm 37 Columbus Day 10 12 2015 10 12 2015 Adding a Holiday 36 Labor Day 09 07 2015 09 07 2015 1 Click New and enter the desired name start date and end date 2 Select the desired holiday group for the new holiday 3 Click Add to save the new holiday 83 e3 eMerge User Programming Guide Schedules A Schedule is a combination of a time interval and one or more days of the wee
16. 11403 11414 11414 110328 11403 110326 12603 15107 15108 12603 12603 12603 Event Description Data Export Complete Web User Login Web User Logout Door Locked Door Unlocked Dashboard M Unlock Door Locked Door Unlocked Dashboard M Unlock Web User Login Web User Logout User Define Field Data Update Region Data Added Aux Output Off Aux Output Data Update Aux Output Off Aux Output Data Update Aux Output Off Aux Output Data Update Dashboard Aux Trigger Dashboard Aux Trigger Aux Output Off Aux Output Data Update Aux Output Off Threat Level Setting Data Update Web User Login Web User Logout Threat Level Setting Data Update Threat Level Setting Data Update Threat Level Setting Data Update 4 Log Report D A D Log LogReport 4 Log Management Customizing the Log Report 1 Select the database to search either Current DB User PC or SD Card Select beginning and ending Log Date for the search Select the general events to search for with the Log Type checkboxes Search for a particular device by checking the Device Name checkbox and enter the device name Device Name Search for a particular Card Holder by checking the Card Holder Name checkbox and enter the Card Holder name Card Holder Name Event Name Output Item Select specific system events by checking the Event Name checkbox and selecting the specific event in the dropdown list To create the log report click Se
17. Activex ov B B 11 e3 eMerge User Programming Guide O Card Holder X Card Holder CAH X Card Holder Card Format Dig Access Level 2 Badging Layout ray Badging Template Card Holders are individuals who access the facility and are entered in the system Access credentials are assigned to Card Holders Creating a Card Holder 1 Click New 2 Enter the name and contact information of the Card Holder 3 Under File Upload click Snapshot to take a picture from an attached USB camera or click Browse to select a file to assign an image to the Card Holder for identification purposes V NOTE Picture files can be 20 Kb maximum JPG BMP or PNG formats Card Holder Options 1 Select ADA Timing for extended timing for the door relay 2 Select Exempt to allow the Card Holder to bypass Anti Passback rules except occupancy rules if the Card Holder is allowed access to the region 3 Select a Web User Account to give the Card Holder operator privileges to the Controller 4 Choose the highest Threat Level that the Card Holder will be allowed access V NOTE A Card Holder cannot access a door if either the Door Threat Level or the System Threat Level is greater than the Card Holder Threat Level 5 Click Save Card Holder Badge 1 Select the Template for the badge V NOTE See Section Badge Printing for details on setting up badge design templates 2 Click Print Badge to launch the bad
18. ED Cet CEND C Door jij Elevator C AUX Input C AUX Output jj Elevator Action all Controller TJ Region Deadman Region A Dead Man region requires each Card Holder after entering the region to periodically check in for safety reasons Card Holders are issued a normal card to enter and exit the region and a special Dead Man Card to indicate activity An alarm will activate after the Card Holder s DeadMan Interval has expired unless they have V Swiped their Dead Man Card at airia one of the Dead Man Regions Out MISC Information Readers This will reset the timer to DeadMan Region the DeadMan Interval for that Card DeadMan Interval 60 min 5 999 Holder HazMat Region a V Exited the Region using their normal Jj HazMat Aux input card This will cancel the timer for that Card Holder V Swiped their normal card at a Muster station This will cancel the timer for that Card Holder Once the alarm has been activated the alarm may be deactivated by Y Card Holder swiping their Dead Man Card at one of the Dead Man Regions Out Readers This will reset the timer to DeadMan Interval for that Card Holder It may or may not turn off the alarm Y Card Holder exiting using their normal card This will cancel the timer for that Card Holder It may or may not turn off the alarm Y Card Holder swiping their normal card at a Muster station This will cancel the timer for that Card Holder It may or may not turn off
19. EEE System Action Source Type cuon Iriggers 4 Where System Event These are various messages and Pop Dp Manara in Dashboant y operations that the system can perform if the Event Action Message Reader 4 was Used for Access triggers V NOTE To have the system send an e mail for an event use the Where dropdown and select Send E Mail 9 Click Action Save and Save in each a o o Choose what the Action will do Enter Text for E Mail and 29 80 Bytes Dashboard Messages 23 e3 eMerge User Programming Guide 3 Event Code I EventAction ID Event Code Event Code lists the events that are available to the operator The user can configure the event to display in the Dashboard and or require the operator to acknowledge the event Selecting Event Codes Event Action gt Event Code 1 On the Event Code list edit the SETATI 7 checkboxes for the events codes that iigsabmesmns E Select All W Select All will display on the dashboard if they Access Denied OCENI Denied Invalid Wiegand Format 2 On the Event Code list edit Card Format Not Defined Display Event the checkboxes for the events Denied Lost Card codes that will require operator 301 Denied Stolen Card 302 Denied Expired Card 303 Denied Inactive Card 305 Denied by Schedule 307 Denied Timed Anti Passback Violation 308 Denied Room Anti Passback Violation 311 Denied Threat Level Violation 313 Access Denied By Hazmat Lockdo Check to 315 Access Denied Invalid Car
20. Level gt Threat Level Current Threat Threat Level Level Setting Disable 25 e3 eMerge User Programming Guide Threat Level Setting KoJi 1 a Optional Feature g Threat Level Threat Level Setting There is a three tier hierarchy of Ihreat Levels to consider when configuring an system First the System Threat Level second the Door Threat Level and third the Card Holder Threat Level See the Door and Card Holder sections for details on setting the Door and Card Holder Threat Levels System Threat Level Setup Threat Level gt Threat Level Setting 1 Click Edit to change the number or Basi title of the Threat Levels Threat Level Count 7 45 2 Select the number of Threat Levels Threat Level Count 5 available for the system with the sessilis Threat Level Count dropdown Up j eat Level 1 tected to 25 Threat Levels can be defined Threat Level 2 GUARDED 3 The titles of each Threat Level Threat Level 3 ELEVATED Threat Levels can be customized to suit the ee HIGH installation Threat Level 5 SEVERE 4 Click Save when finished Threat Level gt Threat Level Setting Basic Threat Level Count Number of po gles Tinea eee Threat Levels Threat Level 1 gt ILOW Threat Level 2 i Threat Levels Threat Level 3 Threat Level 4 Threat Level 5 e3 eMerge User Programming Guide 26 Door A Au Ke Door tT ii Elevator C AUX Input Caage
21. License vV Card Format V Holiday Group vV Schedule vV Door IP Type IP Address Subnet Mask Gateway DNS Server 1 DNS Server 2 HTTP Port gt Static gt 172 16 111 79 gt 255 255 255 0 gt 172 16 111 1 gt 172 16 111 84 88 88 80 vV Access Level HTTPS Off Card Holder _ B Card B Dealer Registration a Start Save DHCP assigns an IP address to the Controller automatically on a network containing a DHCP Server a router will typically have a built in DHCP Server When Static is selected options IP Address Subnet Mask Gateway must be entered DNS is an Internet service that translates domain names into IP addresses The IP address of a DNS is required if using NTP time server or SMTP e mail Editing Network Settings 1 2 O ON DMA Select DHCP or Static Skip to Step 5 if using DHCP Enter a static IP Address for the Controller to use on the LAN The first three values must match other devices on the network e g 192 1 0 x Enter the Subnet Mask address The Subnet Mask determines the manual address mask used by the Controller typically 255 255 255 0 Set the Gateway Address to match the address of the router that connects the LAN to the Internet Enter the IP address of the DNS Server 1 optional use for NTP time server access or SMTP e mail connection Enter the IP address of the DNS Server 2 optional use for NTP time server access or SMTP e mail connection
22. License Key Updated Smart Report Set Data Delete Smart Report Run Added Smart Report Run Complete Smart Report Run Canceled Lost Card Registration DeadMan Grace Complete Elevator Action Data Update RMC Update Camera Group Data Delete One Time Unlock Schedule Data Added One Time Unlock Schedule Data Update Region Data Delete Occupancy Data Clear Access Denied By Elevator Lock Aux Output Single by Elevator Log Database Warming Message Access Violation Two Man Rule Access Denied Manager Absent Access Violation Key Number Check Access Granted Grace Penod First Man In Denied Region Anti Passback Violation Scheduled Backup to SD Card was Successful Backup to SD Card was Successful Scheduled Backup to FTP was Successful Backup to FTP was Successful Scheduled Log Backup to SD Card was Successful Log Backup to SD Card was Successful Scheduled Log Backup to FTP was Successful Log Backup to FTP was Successful System Log is Full Log does not occur anymore Elevators Events Denied Invalid Wiegand Format F Denied By Lock mode is not normal Denied Lost Card Denied Expired Card M Denied by Schedule Denied Room Anti Passback Violation Access Denied By Hazmat Lockdown M Access Denied without Deadman zone Check card Access Granted Manager Read In Door Held Open Door Open REX Trouble Access complete Access Granted Muster Region Guard Tour Checked DeadMan Region Timed Out Aux Output Off Aux Output Single Aux Output E On Aux I
23. Start Save Assigning a Card to a Card Holder 1 Select the Card Holder from the main window 2 Click Add Card 3 Ifusing Card Scan select the door where the card will be scanned 4 Select the appropriate Card Format from the drop down 5 Enter the Card Number of the card 6 If using Card Scan click the button and present the card to the reader The card number will populate the Card Number field 7 For Select Type select Individual or Group access level 8 For Select Level select the desired access levels or use the search icon to find a specific access level and click the right arrow to move the access level to the field on the right 9 For Activation Date choose an optional activation and expiration date for the card 10 Click Save to assign the card to the Card Holder Add Card Card Holder Auto Scan Card Format Card Number Key Number Card Status Card Type Select Type Select Level Ala r Evnirnd Card Number Card Format Administration gt Card gt IEI 26 Bit Wiegand V Active YV ae gt 66 Active Individual V Daily Workers Main Door Server Room s 93 Card Type Card Status Choose Levels Actarstinn Nata e3 eMerge User Programming Guide Network Enter the Network configuration information as provided by the IT administrator Wizard Language Network Setting gt IP Address vV
24. Unlock No security on Entry or Exit e Secure Entry Free Egress Two options both options use card access to enter the Exterior Door Option 1 allows free exit through the exterior door Option 2 requires card access to exit through the exterior door e Restricted Entry and Exit Four options all options use card access to enter the Exterior Door Option 1 allows free exit through the exterior door Option 2 requires card access to exit through the interior door Option 3 requires card access to exit through the exterior door Option 4 requires card access to exit through either door e Pair Door Select the second Man Irap door that is closest to the secured area 3 Select the Door s Default Status This setting will be determined by the lock type energized or de energized 4 Assign Re Lock on Open if desired This will re lock the door immediately upon opening the door 5 Adjust Door Unlock Time if desired This is the length of time the door relay is active after a valid access request e3 eMerge User Programming Guide 28 Door Cont Cae Door tT ii Elevator C AUX Input C AUX Output IFA Elevator Action a Controller 7 Region Door Status Alarm Output Sets the actions of a door contact on the door The door contact must be enabled to use these functions 1 sa a a door alarm output if the door opens Enable W Forced Door w Held Door Enable gt N Alarm Shunt but no access was granted Check Held Do
25. all other Regions e A Card Holder credential can only exist in one Region at a time e A Card Holder may occupy multiple regions if they are assigned multiple credentials e A Child Region cannot have an Occupancy Limit because its occupancy count is included as part of its Parent Region Region Occupancy Counting e The occupancy count for a Region is the sum of the occupancy count for the Region plus any Child Regions or Sub Regions which in turn may have Children or Sub Regions of their own e When a Card Holder credential enters a Region the occupancy count for that Region increases by 1 e When a Card Holder credential exits a Region the occupancy count for that Region decreases by 1 e The Occupancy count can never go below 0 Occupancy Limit Enforcement Notes e For occupancy counting to work effectively both In Readers and Out Readers must be used e An Out Reader cannot be in an uncontrolled space no Region assigned unless the In Reader is also in an uncontrolled space means it is not connected to a Region The In Reader and Out Reader cannot be the same device unless they are both setup as in an uncontrolled space or a Muster Region e Card Holders with the Exempt option enabled still obey the occupancy limit enforcement rules e A denied access attempt at an occupied Region does not restrict the Card Holder from entering other Regions with normal access 41 e3 eMerge User Programming Guide Region cont
26. and click Holiday Delete 3 Click OK to confirm the deletion Editing a Schedule Select the schedule to be edited and click Edit 2 Perform the desired changes to the Name Description and time intervals 3 Scroll down and click Save to save the changes V NOTE When changing or deleting a schedule review the unlock schedules and Access Levels for possible changes 19 e3 eMerge User Programming Guide Holiday Schedule Holiday fy UnlockSchedule fy OneTime Unlock Schedule Use Holiday to define days and times during the year when holiday hours are used When the holiday starts the Controller switches from regular hours to holiday hours When the holiday ends the regular hours resume You can assign four holiday groups with up to 30 holidays total among the groups A holiday can include any number of consecutive days within the same calendar year Ihe system Controller has preconfigured holiday groups based upon the country you selected in the Language section of the Wizard The holiday groups are preconfigured through 2021 for quick setup Editing a Holiday Year 1 Select the desired holiday and click Stat Date End Date ei Guan Edit Christmas Day 12 25 2015 12 25 2015 2 Change the start date and end date Thanksgiving Day 11 26 2015 11 26 2015 to the desired date Veterans Day 11 11 2015 11 11 2015 3 Rename the holiday it is Columbus Day 10 12 2015 10 12 2015 recommended that pre configured Labor Day
27. desired Name and Description optional for the input 3 Assign the input to a Floor for viewing on the Dashboard 4 Select the appropriate Input Type for the input This setting will be determined by the wiring and Device Setting gt Aux Input type of switch connected to the Basic input NC or NO supervised or aes at unsupervised Description gt Aux Input 1 x Floor Default Floor W Input Type NO Unsupervised YV 5 Click Save Client Port Name Description Input Type Default Floor NO Unsupervised Default Floor NO Unsupervised Default Floor NO Unsupervised Default Floor NO Unsupervised e3 eMerge User Programming Guide 32 Aux Output GOAO AENDE f j Door fhi Elevator C4 AUX Input C AUX Output _ Gi Elevator Action l Controller J Region Aux Output displays the outputs that are assigned to the system Click on the output name to view or edit the settings of the output Editing an Output usages Nicorette 1 Select the desired output and click No Client Port Name Description Floor Default State Mode On Time OffTime Repeat Edit Default Floor Energized Single Pulse 2 Enter a desired Name and Default Floor De Energized Single Pulse Description optional for the Default Floor De Energized Single Pulse output Default Floor Energized Single Pulse 3 Configure the Mode of the output e Single Pulse Output latches in response to a valid event for the time entered e Repe
28. eMerge User Programming Guide Toolbar Menu The Toolbar provides access to all setup programming management and reporting options of the Controller a gt A gt woes AED OCP Ga 8 8 Cin 1G CP eTVC T N EAN eV A Aan _ Dashboard The default system software page which is primarily used to monitor and acknowledge recent events Camera Configure and view cameras and DVRs if installed Administration Add edit or delete Card Holders card formats and Access Levels badge layouts and templates Schedule Add and edit time schedules holidays and unlock schedules Events Create events that are assigned to actions For example a time schedule can be assigned to an auxiliary output Threat Level Enable and configure Threat Level settings if Threat Levels are enabled Device Setting Configure the doors elevators inputs and outputs that are licensed and available within the system Edit Controller locations and region OOOOOGOOG OOOO User Setting Set user fields define the operators that can login and select their level of system access System Setting Update backup restore or reset the Controller Network Setting Configure the IP address FTP update server SMTP time server and RMC Floor Setting Load a floor plan graphic which will be displayed on the Dashboard Data Transfer Export or import data using a CSV file Log Opens the log da
29. enforced without regard to the United Nations Convention on the International Sale of Goods This EULA contains the complete agreement between the parties with respect to the subject matter hereof and supersedes all prior or contemporaneous agreements or understandings whether oral or written You agree that any varying or additional terms contained in any purchase order or other written notification or document issued by you in relation to the Software licensed hereunder shall be of no effect The failure or delay of Nortek Security amp Control to exercise any of its rights under this EULA or upon any breach of this EULA shall not be deemed a waiver of those rights or of the breach No Nortek Security amp Control dealer agent or employee is authorized to make any amendment to this EULA If any provision of this EULA shall be held by a court of competent jurisdiction to be contrary to law that provision will be enforced to the maximum extent permissible and the remaining provisions of this EULA will remain in full force and effect All questions concerning this EULA shall be directed to Nortek Security amp Control 1950 Camino Vida Roble Suite 150 Carlsbad CA 92008 6517 Nortek Security amp Control and other trademarks contained in the Software are trademarks or registered trademarks of Nortek Security amp Control LLC or its affiliates in the United States and or other countries All rights strictly reserved No part of this docume
30. length of time the door relay is active after a valid access request e3 eMerge User Programming Guide 86 Doors Cont Door Status Alarm Output Sets the actions of a door contact on the door The door contact must be enabled to use these functions 1 bias ADO ea sais door alarm output if the door opens Enable Forced Door fg Held Door Enable Z Alarm Shunt but no access was granted 8 Default State Energzed V Default State Check Held Door to trigger the 58 Output Output door alarm output if the door is held open longer than the Held Open Time Select Energized or De energized for the Default State of the Door Status Alarm Output Select an Output to use for the Door Status Alarm Output Click to enable an Alarm Shunt output to operate when access is granted to the secured door Select Energized or De energized for the Default State of the Alarm Shunt Output Select an Output to use for the Alarm Shunt Output Threat Level 1 eae teers eae level allowed before the door will Tirant Lowi Low v7 automatically lock Note An unlocked door will lock if the System Threat Level is greater than the Door Threat Level including doors that are unlocked by schedule Note The Dashboard M Unlock and E Unlock may be used to unlock a door that has been locked due to elevated system Threat Level Check Ignore REX to ignore input from a Rex button if the current System Threat Level is higher t
31. log displays on the screen 2 Click the page number or arrows at the bottom of the screen to display other pages of the log Printing the Log 3 To print out the log click Print e3 eMerge User Programming Guide Log gt Log Time 09 29 2015 10 40 16 09 29 2015 08 44 07 09 29 2015 08 40 42 09 29 2015 07 54 40 09 29 2015 07 54 37 09 29 2015 07 54 37 09 29 2015 07 54 36 09 29 2015 07 54 33 09 29 2015 07 54 32 09 29 2015 07 53 56 09 28 2015 16 24 45 09 28 2015 15 32 45 09 28 2015 15 04 33 09 28 2015 14 24 27 09 28 2015 14 24 26 09 28 2015 14 18 49 09 28 2015 14 18 49 09 28 2015 14 14 00 09 28 2015 14 14 00 09 28 2015 14 05 54 09 28 2015 14 05 46 09 28 2015 14 05 30 09 28 2015 14 05 30 09 28 2015 13 57 48 09 28 2015 07 56 42 09 28 2015 07 55 29 09 25 2015 16 18 19 09 25 2015 15 16 12 09 25 2015 15 15 49 09 25 2015 14 51 01 D Log D Log Report Device Name 70 167 14 131 70 167 14 131 70 167 14 131 Door 4 Door 4 Door 4 Door 3 Door 3 Door 3 70 167 14 131 70 167 14 131 70 167 14 131 70 167 14 131 Propped Door AO4 70 167 14 131 Forced Door A01 70 167 14 131 Forced Door AO4 70 167 14 131 AO 4 AO 1 AO 1 70 167 14 131 AO 1 70 167 14 131 70 167 14 131 70 167 14 131 70 167 14 131 70 167 14 131 70 167 14 131 60 User Name 4 C4 Oo Log Management Event Code 12205 15107 15108 600 601 11211 600 601 11211 15107 15108 14003 16301 110326 11403 110328 11403 110326
32. manual 4 Elevators Elevators elevator selection elevator relays f O Ask for elevator when report is run or elevators on selected floors O Use the following specification 6 Click Next to setup the Events filters i Unselected Elevators Selected Elevators unselect_elevator_relays select_elevator_relays Unselected Floors Default Floor 69 e3 eMerge User Programming Guide Ih Report h Access Report llr System Report O smart Report e smart Report Setting O Smart Report Setting Events Event Filters e Select one of the event filter options for all events ask when report is run or use the event filter checkboxes Event Groups e Use the checkboxes to select Event Group filters for the Smart Report Individual Events e Use the checkboxes to select Individual Event filters for the Smart Report 7 Click Next to setup the Output Format for the Smart Report e3 eMerge User Programming Guide 70 Report gt Smart Report Setting Date Time Cardholders Cards Events AI Events O Ask for events when report is run Use the following specification Reader Elevator Out Access Denied Card Format Not Defined Denied Invalid Access Level Denied Stolen Card Denied Inactive Card Denied Timed Anti Passback Violation Denied Threat Level Violation Access Denied Invalid Card type Granted Door Forced Open Door Contact Trouble Door Closed REX In Access not complet
33. nce E E ee tans 36 User Defined Field 055 44 User Role 2 0 00 e ee es 45 Web User Account 00000 46 UDO cxssneere een eee eee cree sy 47 BACK scans ate woe ee Dee aE 48 Restore ocdacc wud we eed caus oe aenen es 49 Save amp Reboot 0 00000e eee 50 Factory Default 000008 51 IP ROCESS st cavetiecde eter es 52 PIP se gierceveweo Hee ees fu bee AET 53 ON aks eeaes eee ae e ee oka ee 54 Time Server cc es 55 AIM Ossd eee tea een dae eke eee eens 56 Floor Setting 00 0000 57 User Data Export 58 User Data Import 59 LOGesairwiese cee ee eee pees ee 60 Log Management 2 0055 62 Report 5s 64 Bas aude a ease we heen ees 63 Access Report 0 0000eeeeeee 64 System Report 000 eee 65 Smart Report 000 eee ees 66 Smart Report Setting 67 Card Holder Group 0005 73 Door Group 020 e eee ees 74 Camera Group sasssa nanesen ee ees 75 Access Level Group 5085 76 Client Management 77 Client Replacement 5 78 LOGOUL 2 asmina naasa Swduateeneaee 79 4 Using the Wizard 80 Language 02 c eee eee ees 81 LICENSE lt tc obieun Seay wea en kurina 81 Card Format 000 ce eee eens 82 Using the Decoder 82 Holiday Group 0202e eee eeee 83 Schedules 0tecedceerece
34. provided by your web host Network Setting gt FTP Editing FTP Settings Check the Enable checkbox to Basic enable an FTP server connection Enable 2 Enter the IP address of the FTP Server Address server in the Server Address field Server Port 3 Enter the communications port Server ID number into the Server Port field SRE PATE 4 Enter the FTP server user name Upload DIR into the Server ID field 5 Enter the FTP server password into the Server Password field 6 Check the Server Passive Mode checkbox if required by the FTP Network Setting gt FTP server Basic 7 Enter the upload directory path Enable B used on the FTP server in the ETER Te Upload DIR field 8 Click Save to save the changes Server Port Server ID Server Password Server Passive Mode Upload DIR e3Backup aparna 53 e3 eMerge User Programming Guide ea E J IPAddress H FTP SMTP D TimeServer H RMC Editing SMTP Settings Network Setting gt SMTP L b i To allow the Controller to send SMTP e mail messages check the Use SMTP Service checkbox Enter the SMTP mail server URL typically mail your email domain com the the SMTP Server field Enter the incoming port number of the SMTP mail server in the Port Send to E mail Address field Enable TLS if your mail server uses secure server communication this is common Check the TLS Used Use SMTP Service SMTP Server Netwo
35. the alarm V System Administrator Acknowledges the alarm This will deactivate the alarm even if all Card Holder alarm triggers have not been cleared If multiple Card Holder have triggered the Dead Man Alarm then only when the last Card Holder has been cleared will the alarm be deactivated Creating a Dead Man Region 1 Check the DeadMan Region checkbox to create a Dead Man Region 2 Enter a time in minutes 5 60 for the DeadMan Interval The default is 5 minutes Dead Man Region Notes In the Door setting for the reader in the Dead Man Region the Out Reader Region must be set to the Region defined as a Dead Man region e3 eMerge User Programming Guide 42 Region cont DEAE A GA aa i if Door fhi Elevator C4 AUX Input C AUX Output jj Elevator Action a Controller J Region i 2 A HazMat Region can be locked down to prevent entry and exit in case of hazardous materials emergency When the selected AUX input is triggered all doors associated with the HazMat Region will be locked and all access in and out of the HazMat Region will be denied until the selected AUX input has returned to normal After a HazMat alarm has been triggered a HazMat Unlock Card is required to cancel the alarm Creating a HazMat Region 1 Check the HazMat Region checkbox to create a HazMat Region 2 For the HazMat Input select the Auxiliary Input 1 4 that the trigger device is connected to Device Setting gt Re
36. the interference at his own expense eMerge Access System Installation Contact Information Contents 1 Introduction 0 0 ees 2 General Features 00200000 eee 2 System Information 0 06 2 2 Software Layout 3 System Server Software 3 Toolbar Menu 0000 eee ewes 4 3 System Programming 5 Connect to the Controller 5 Dashboard 0000 eee eee 6 Dashboard Setting 0 7 Camera ViOW 2 0 cee eee es 8 Camera Setting 0 002e eens 9 DVR VIEW cxcca wide etait ew eda we wees 10 DVR Setting 000 0c eee 11 Card Holder 000 eee e enna 12 Card Format 0000 cee e ea naee 15 Access Level 0000 ec eeeeees 16 Badging Layout 00585 17 Badging Template 18 Schedule 0 00 cee eee ee 19 Holda sc cecucrtoeaw ideas ate diag ed 20 Unlock Schedule 020005 21 One Time Unlock Schedule 22 Event Action 00000 e eee eee 23 Event Code ccc e eee ees 24 Threat Level 2 0000 cece eee 25 Threat Level Setting 26 DOOM soc ove ee hee ee ui te eae eee eb EN 27 FICVAQIOF a vecua ch dee wd od nnana 31 Aux IADUL 2c 04 0s oo eee aie ae are ees 32 AUX OUWDUE 36a io baax 6 ek eee eee ed ini 33 Elevator Action 000 cee eee 34 Controller 0 0 00 eee ee 35 REGION i s esaa a a a
37. 01 01 00 02 48 License Changed 3 Click the Print button in the upper 1970 01 01 00 03 04 Web User Logout right corner to send the Smart 1970 01 01 00 03 06 Web User Login 2015 09 24 11 34 26 IP Address Configuration Updat Exporting to a Text File 2015 09 24 11 35 27 System Startup 1 With the selector buttons for the 2015 09 24 11 36 16 Web User Login 2015 09 24 12 11 16 Web User Account Data Added desired Smart Report click Text protai acana 2015 09 24 12 12 51 Web User Login 2 The browser will prompt for saving WEAN Web User Lagin or viewing Select your choice 2015 09 25 07 53 00 Data Backup Successful 3 A basic text file will be created simi aan Card Holder Data Added 2015 09 25 08 01 36 Card Holder Data Update Exporting toa CSV File 2015 09 25 08 02 44 Access Level Data Added 1 With the selector buttons for the 2015 09 25 08 02 59 Card Data Added e 15 09 203 31 desired Smart Report click CSV ee nisin te 2015 09 25 08 06 27 Web User Login 2 The browser will prompt for saving or viewing Select your choice 3 A comma separated value file for use in spreadsheets will be created Exporting toa HTML File 1 With the selector buttons for the desired Smart Report click HTML 2 The browser will prompt for saving or viewing Select your choice 3 An HTML file for viewing in a browser will be created e3 eMerge User Programming Guide 66 an Smart Report Setting Ih Report ii AccessReport l
38. 09 07 2015 09 07 2015 holidays be renamed when edited lr nat iaai aa k dL Cie 05 25 2015 05 25 2015 1C ave 02 16 2015 02 16 2015 Deleting a Holiday 3 mrcuther King Day 01 19 2015 01 19 2015 1 Highlight the holiday to be deleted New Year s Day 01 01 2015 01 01 2015 2 Click Delete A confirmation box will appear 3 Click OK to confirm Adding a Holiday 1 Click New and enter the desired name start date and end date Name gt Memorial Day Select a Holiday snc e then Click Edit p2 No Holiday Group 3 No Holiday Group 4 No 2 Select the desired holiday group for the new holiday End Date gt 05 25 2015 3 Click Add to save the new holiday Holiday Group 1 No Holiday G V NOTE Access will be restricted on any holiday assigned to a holiday group See Schedules for information on how to allow access on holidays Schedule gt Holiday Group Groundhog Day gt 102 02 2016 02 02 2016 C Holiday Group 2 C Holiday Group 3 W Holiday Group 4 e3 eMerge User Programming Guide 20 Unlock Schedule GAA 4 pik la Unlock Schedule Schedule W Holiday a Unlock Schedule la One Time Unlock Schedule An Unlock Schedule defines which Schedule will be used with selected access devices to automatically unlock one or more doors oe an Unlock Schedule Click New 2 Enter a Unlock Schedule Name 3 Select the Schedule when the door will be unlocked
39. 1 To export the Card Holder data click Export 2 The CSV file of the Card Holder data will be downloaded through the browser Basic e3 eMerge User Programming Guide 58 a User Data Import Li User Data Import a S Ai D User Data Export De User Data Import User Data Import provides the ability to import Card Holder data from a comma separated value CSV file To successfully import a file the column headers must match those present in the User Data Export file It is suggested f i to perform a data export and use it as a J File Type CSV template for the import file EEE Skip Oane Data Transfer gt User Data Import You must have the related card formats File and Access Levels configured before importing the file WARNING Do not use special characters lt gt amp in any fields V NOTE Data will not be imported unless the information is entered in the same manner in which it appears in the system software database e g case sensitive and syntax sensitive Importing User Data 1 To skip Card Holder records that currently exist in the system select Skip To overwrite Card Holder records that currently exist in the system select Overwrite 2 Click Choose File and select the file to import 3 Click Import 59 e3 eMerge User Programming Guide Log Log displays the most recent events for quick viewing Viewing the Log 1 When Log is selected the
40. 12345 11 Test Creating a Card Holder Holder 1 Click New First Name ri Last Name i 2 Enter the name and contact information of the Card Holder FO Card 3 Under File Upload click Snapshot a to take a picture from an attached USB camera or click Browse to select a file to assign an image to a Click to Use the Card Holder for identification purposes ee TE Picture File NOTE Picture files can be 20 Kb Middle Name Loo as maximum JPG BMP or PNG formats Last Name Browse x Max 20KB jpg bmp png Phone Number 760 555 1234 Click Cell Phone 760 555 0000 to Take E mail Picture e3 eMerge User Programming Guide 90 Card Holder Cont Card Holder Options T Select ADA Timing for extended timing for the door relay Select Exempt to allow the Card Holder to bypass Anti Passback rules except occupancy rules if the Card Holder is allowed access to the region Select a Web User Account to give the Card Holder operator privileges to the server software Choose the highest Threat Level that the Card Holder will be allowed access NOTE A Card Holder cannot access a door if either the Door Threat Level or the System Threat Level is greater than the Card Holder Threat Level 5 Click Save Card Holder Badge 1 Select the Template for the badge V NOTE See Section Badge Printing for 2i 3 details on setting up badge design templates Cl
41. 4 Click the Select Type drop down to select an individual door or a group of doors 5 For Unlock Device select the desired doors or use the search icon to find a specific door and click the right arrow to move the doors to the field on the right Click Add to create the unlock schedule Cae an Unlock Schedule Select the desired Unlock Schedule and click Edit 2 Edit the Unlock Schedule Name Schedule Type Unlock Device 3 Click Save ee an Unlock Schedule Select the Unlock Schedule to be deleted 2 Click Delete A confirmation box will appear 3 Click OK to confirm Schedule gt Unlock Schedule To Add an Unlock va Schule lk Mew E er e Uniock Schedule Name V Schedule gt Unlo Unlock Schedule Name Schedule Select Type Unlock Device Schedule gt Unlo ck Schedule Unlock Schedule Name Short Weeks Regular Weeks 1 gt Short Weeks gt 4 Day Weeks Door Individual V Vv Schedule Unlock Device Schedule Unlock Device Always Door 1 Weekly Employees Door 1 Uniock Schedule Name VP ck Schedule Unlock Schedule Name Short Weeks Schedule Unlock Device z 4 Day Weeks Door 1 Unlock Schedule Name Short Weeks Regular Weeks 21 Select Unlock Schedule and Click Edit Schedule Unlock Device 4 Day Weeks Door 1 Weekly Employees Door 1 Unlock Schedule Name V f 1 e3 eMerge User Programming Guide One Time Unlock Schedu
42. 9 _ Enable Grace e Soft Triggers an alarm then grants Jj Reset Violations Daily C access if the Anti Passback time Time of Day All violations will be reset at the selected time interval has not expired before the credential was used at the same reader again e Hard Triggers an alarm and prevents access if the Anti Passback time interval has not expired before the credential was used at the same reader again Enter the number of minutes 0 999 for Anti Passback Interval This is the length of time that presenting the same credential again will cause an anti passback violation Check the Enable Grace checkbox to allow the administrator to permit grace for the Card Holder in case of an anti passback violation NOTE Selecting 0 minutes for the Anti Passback Interval allows no time and effectively disables the Passback Violation for the region Don t set it to 0 and expect Anti Passback to function properly To minimize clutter on the Grace Screen check the Reset Violations Daily checkbox to clear all Passback Violations for the Region once a day When Reset Violations Daily is enabled select the Time of Day for the reset to occur Passback Violation Operation Notes Presenting a credential again before the timer has expired will restart the timer Timed Anti Passback is for In Readers only it has no effect on Out Readers If the Card Holder exits the Region through an Out Reader the timer is reset and stopped When Enable Grac
43. Code Data Update Elevator Action Data Delete Camera Group Data Added Camera Group Data Update One Time Unlock Schedule Data Delete Region Data Added Region Data Update Access Denied By Elevator Information not found Aux Output Repeat by Elevator Aux Output Off by Elevator Popup System Message Access Granted First Man In Access Violation First Man In Access Pending Two Man Rule Denied Region Occupancy Limit Violation M Denied Region Tailgating Violation Scheduled Backup to SD Card Failed Backup to SD Card Failed Scheduled Backup to FTP Failed Backup to FTP Failed Scheduled Log Backup to SD Card Failed Log Backup to SD Card Failed Scheduled Log Backup to FTP Failed Log Backup to FTP Failed Output Format Save Report in Smart Report Setting Cont COCO e a ih Report ii AccessReport lli SystemReport SmartReport Smart Report Setting Output Format The Output Format settings control the PAS resulting look of a Smart Report when it is run Ihe columns column titles column widths and sort orders can be customized Date Time Cardholders Cards Doors Elevators Events Output Format Save Report Column Title Width Sort Order E a o 8 For each column of the Smart gt Report choose the column details ser Name J Column e Use the dropdown selectors to e el dis sien w the column Title w Sno e Enter the title to place above the column Device Name Device Name Bo emove Wid
44. Door List e3 eMerge User Programming Guide 16 A Badging Layout 66 200 Badging Layout X Card Holder Card Format P AccessLevel BadgingLayout 2 Badging Template The Badging Layout Module is used to design printable badges Ihe badge orientation background logo Card Holder picture and text fields can be customized and saved under a layout name Layout Badging Layout 1 Use the Select Layout dropdown to modify an existing badge layout or J select Layout create a new layout Layout Namo Portrait_Default_Sample2 xml v Ori entati on Badge Orientation OLandscape Potrait 2 Choose Landscape wide or ont YAINSTINST Linear Bran Browse Portrait tall for the badge Logo Width 7 180 10 orientation Logo Position Logo Height Background File a ogo file Y INSTINST Linear Bran Browse 3 Ifa background is needed browse g Picture X Position for the Background File 100pxX130px Lo go Field ID X Position Max number of characters FieldNamet 20 25 4 Set alogo size to fit the logo with a e e Field ID X Position Max number of characters the Logo Width and Logo Height ain 1 e settings 5 Field ID X Position Max number of characters 5 Set the logo position on the badge FieldName3 80 25 The X Position 1S the number of Field ID X Position Max number of characters pixels in from the left edge The Y Position is the number of pixels
45. E08 t t t t t t t t Dashboard gt Dashboard _ Floor o Icons Over a Floor Image 7 e3 eMerge User Programming Guide camera View l Optional o aay ay W a j Feature Camera View o Camera Setting O DVR View e DVR Setting Camera View allows the user to select defined IP camera video matrix and various camera views A license upgrade is required to use this feature Camera gt Camera View u eee Exton Warehouse Y Defining Camera Views 1 Click Edit and add the desired cameras from the drop down list This defines the camera position in the camera view 2 Select Imode 4mode 9mode or 16mode to set the amount of cameras displayed in the view window 3 Click Save NOTE Live video is dependent on IP camera settings and browser capabilities Not all camera and browser configurations are supported None y None y Me y Me y Me y Me y None Y lt e3 eMerge User Programming Guide 8 Camera Setting Optional G4 CPX ED OP O CED a j T Feature lt 3 Camera View e Camera Setting O DVR View te DVR Setting Camera Setting allows configuration of IP cameras A license upgrade is required to use this feature Camera Definition Adding a Camera 1 Click New and enter a name and AER Name description for the camera 2 Select a camera brand from the PEEN drop down list If your ca
46. In Reader Type Keypad or Card In Reader Region Uncontrolled Space V Reader Out Reader Name ut Reader 1 1 In the Reader section select the settings for the door s reader Out Reader Type Keypad or Card YV Out Reader Region Uncontrolled Space V Door Contact 1 In the Door Contact section check the Enable checkbox if a door contact is used Enable Door Contact Name 2 Name the door contact and select Door Contact its type 3 Adjust the Held Open Time which is the length of time the door can be open following a valid access request NO Unsupervised WV Held Open Time sec ADA Open Time sec Door Rex Name 4 The ADA Open Time is an Rex additional time added to the Held Rex Activates Door Lock Open Time Rex 1 Enter the Door Rex Name for the door s request to exit switch 2 Select the type of Rex switch 3 Check the Rex Activates Door Lock checkbox to have the Rex activate the door s lock 85 e3 eMerge User Programming Guide Doors Cont Door Lock Mode 1 Choose a Door Lock Name to name the lock for logging 2 Configure Door Lock Mode as follows e Normal Lock activates in response to a valid access request and REX unlocks door for exit e Locked Does NOT grant access in response to REX card or code Locked w REX Remains in locked mode ONLY REX will activate lock Unlocked Door will remain unlocked at ALL times e Man Trap Sets the door loc
47. LA surviving any such termination 7 You shall not use the Software to develop any software or other technology having the same primary function as the Software including but not limited to using the Software in any development or test procedure that seeks to develop like software or other technology to determine communications protocols used by the Nortek Security amp Control eMerge Product or to determine if such software or other technology performs in a similar manner as the Software 8 You may not extract any JavaScript from the Software and use it in some other application Ownership The foregoing license gives you limited license to use the Software Nortek Security amp Control and its licensors and suppliers retain all right title and interest including all copyright and intellectual property rights in and to the Software and all copies thereof All rights not specifically granted in this EULA including Federal and International Copyrights are reserved by Nortek Security amp Control and its suppliers WARRANTY DISCLAIMER 1 THE SOFTWARE IS PROVIDED TO YOU ON AN AS IS BASIS NORTEK SECURITY amp CONTROL PROVIDES NO TECHNICAL SUPPORT WARRANTIES OR REMEDIES FOR THE SOFTWARE 2 NORTEK SECURITY amp CONTROL AND ITS LICENSORS AND SUPPLIERS DISCLAIM ALL WARRANTIES AND REPRESENTATIONS WHETHER EXPRESS IMPLIED OR OTHERWISE INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ALSO THERE IS
48. NO WARRANTY OF NON INFRINGEMENT AND TITLE OR QUIET ENJOYMENT NORTEK SECURITY amp CONTROL DOES NOT WARRANT THAT THE SOFTWARE IS ERROR FREE OR WILL OPERATE WITHOUT INTERRUPTION NO RIGHTS OR REMEDIES REFERRED TO IN ARTICLE 2A OF THE UCC WILL BE CONFERRED ON YOU UNLESS EXPRESSLY GRANTED HEREIN THE SOFTWARE IS NOT FAULT TOLERANT AND IS NOT DESIGNED INTENDED OR LICENSED FOR SECURITY SYSTEMS USE OR ANY OTHER USE IN HAZARDOUS ENVIRONMENTS REQUIRING FAIL SAFE CONTROLS INCLUDING WITHOUT LIMITATION THE DESIGN CONSTRUCTION MAINTENANCE OR OPERATION OF NUCLEAR FACILITIES AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS AIR TRAFFIC CONTROL AND LIFE SUPPORT OR WEAPONS SYSTEMS NORTEK SECURITY amp CONTROL SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR SUCH PURPOSES 3 IF APPLICABLE LAW REQUIRES ANY WARRANTIES WITH RESPECT TO THE SOFTWARE ALL SUCH WARRANTIES ARE LIMITED IN DURATION TO NINETY 90 DAYS FROM THE DATE OF DELIVERY 4 NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY NORTEK SECURITY amp CONTROL ITS DEALERS DISTRIBUTORS AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF ANY WARRANTY PROVIDED HEREIN 5 USA only SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM STATE TO STATE 6 NORTEK SECURITY amp CONTROL SHALL HAVE NO RESPO
49. NSIBILITY IF THE SOFTWARE HAS BEEN ALTERED IN ANY WAY OR FOR ANY FAILURE THAT ARISES OUT OF USE OF THE SOFTWARE WITH OTHER THAN A RECOMMENDED HARDWARE CONFIGURATION e3 eMerge User Programming Guide Restrictions This warranty does not apply to any Nortek Security amp Control Products that a have been altered except by Nortek Security amp Control or with the written permission of Nortek Security amp Control b have not been installed operated repaired or maintained in accordance with instructions supplied by Nortek Security amp Control c have been subjected to abnormal physical or electrical stress misuse negligence or accident d are licensed for beta evaluation testing or demonstration purposes or e are systems for which Nortek Security amp Control has not received a payment of purchase price or license fee 6 LIMITATION OF LIABILITY 1 NEITHER NORTEK SECURITY amp CONTROL NOR ITS LICENSORS OR SUPPLIERS SHALL BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY INDIRECT SPECIAL INCIDENTAL PUNITIVE COVER OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO DAMAGES FOR THE INABILITY TO USE EQUIPMENT OR ACCESS DATA LOSS OF BUSINESS LOSS OF PROFITS BUSINESS INTERRUPTION OR THE LIKE ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE AND BASED ON ANY THEORY OF LIABILITY INCLUDING BREACH OF CONTRACT BREACH OF WARRANTY TORT INCLUDING NEGLIGENCE PRODUCT LIABILITY OR OTHERWISE EVEN IF NORTEK SECURITY
50. RANTY INFORMATION AND LIABILITY DISCLAIMERS BY USING THE SOFTWARE YOU ARE CONFIRMING YOUR ACCEPTANCE OF THE SOFTWARE AND AGREEING TO BECOME BOUND BY THE TERMS OF THIS AGREEMENT IF YOU DO NOT AGREE TO BE BOUND BY THESE TERMS THEN DO NOT USE THE SOFTWARE 1 Definitions 1 Nortek Security amp Control means Nortek Security amp Control LLC 2 Product means only the Nortek Security amp Control eMerge and other Nortek Security amp Control products 3 Software means only the Nortek Security amp Control software program s and third party software programs in each case provided by Nortek Security amp Control in connection with the Products and may include corresponding documentation associated media printed materials and online or electronic documentation and all updates or upgrades of the above that are provided to you License Grants 1 You may use the Software on an eMerge product provided however that notwithstanding anything contrary contained herein you may not use the Software on any non Nortek Security amp Control product or device including but not limited to mobile devices internet appliances set top boxes STB home automation systems or any other consumer electronics devices You may upgrade the Software on an Nortek Security amp Control eMerge product following procedures authorized by Nortek Security amp Control 2 You agree that Nortek Security amp Control may audit your use o
51. Space ET 55063 335 872 KB E System 183 728 KB E FloorImage 0KB Ml Database 1 212 KB _ Available 150 932 KB User Image 9 910 3 864 064 KB E Used 44 480 KB E Image 338 464 KB _ Available 3 481 120 KB 1 632 KB 7 707 648 KB This report was ran at 09 29 2015 11 08 32 0 021 65 e3 eMerge User Programming Guide in Smart Report Smart Report lh Report FA Access Report all System Report O smart Report O Smart Report Setting BeaBE QE ie The Smart Report option displays Smart Reports that were generated with the Smart Report Setting Options are available for viewing printing and exporting the Smart Report Report gt Smart Report Report Name Status Start Time End Time Viewing a Smart Report Smart Report 1 Complete 2015 10 09 2015 10 09 1 With the selector buttons for the 09 26 08 09 26 11 desired Smart Report click View 2 A Smart Report Viewer browser window will open displaying the Smart Report Smart Report 1 2015 10 09 2015 10 09 09 24 55 09 25 00 3 Use the page numbers at the bottom to navigate to other pages of the Smart Report Printing a Smart Report 1 With the selector buttons for the E EEN desired Smart Report click Print Date amp Time User Name Card Number Event Description 2 A Smart Report Viewer browser 1970 01 01 00 00 46 System Startup window will open displaying the alates ee S t R t 1970 01 01 00 02 45 License Key Updated mar eport 1970
52. Text Transport Protocol Secure HTTPS communications the eMerge system uses a default security key and certificate If the installations network requires a different specific security key and certificate edit the two items 1 Click Upload cer key Network Setting gt IP Address gt SSL Toolbox o Enter Private Key 2 Enter the Private Key into the SSL tne pa Toolbox MIICXgIBAAKBgQDAxBpxgJhPMB3 04a750Sx8EIVOocCKSDyeNNpVhmTFYUOOEOC 8 8iAi6aObrExUkBSDMmAm1mX9Qvy dtcofig1XI4NjyIMKnEQfEldOncaLERTM7 3 Enter the Certificate into the SSL JHS50bOr SgjkGrRFIFEn 5ZDF040A0Gc3PFhMQr90lBSFJSgHOzFaVGTUwIDAGAB Toolbox AoGASUoF18ORpQHhVgPBRSzYeokjTVjsPbkPasDfeDwhCxfyd56SpHZKOU7IEWQB 65Aqmo8tyzS DV4 2VBOKVGTMbVTZddY6RsXjNiz6 16daWiMmZ3qJiwSbVWBVSi 4 Click Save amp Reboot pit es xe ps EE ne Enter Certificate BEGIN CERTIFICATE MIICoTCCAgqgAwIBAgIJAPOLiaoknnqpMA0GCSqGSIb3DQEBBQUAMEAxCzZAJBgNV BAY TAKtSMQ4wDAYDVQQIEwWVTZW91bDEhMB8GA1UEChMYSW50ZXJuZXQgV21kZ210 cyBQdHkgTHRkKMB4XDTEyMDcwMjA4NDIwOVoXD TMyMDYyNzA4NDIwOVowQDELMAkG A1UEBhMCS1IxDJAMBgNVBAgT BYVNIib3VsMSEwHwY DVQQKExhJbnRicm5ldCBXaWwRn aXRzIFB0eSBMdGOQwgZ8wDQY JKoZlhvcNAQEBBQADgY0AMIGJAoGBAMDEGnGAmEsw Se eke EAE acies e3 eMerge User Programming Guide 52 GAGs 1G amp J IPAddress H FTP 3 SMTP O TimeServer H RMC File Transfer Protocol FTP enables and configures the system to backup to an FTP location Enter FTP information as
53. The remaining Region options are not used or available when Only Muster is selected Muster Region Notes A Muster Region is a Region used as a centralized place to do a roll call A Muster Region will remove Card Holders from their currently occupied Region and place them in the Muster Region where the reader is at Maximum number of Muster Regions 125 A Muster Region is attached to an In Out set of readers for a door both readers must be defined to the Region A Muster Region is valid for the entire site It is possible to have multiple Muster Regions but they all serve in parallel for the entire site For instance each building of a site could have its own Muster Reader but a Card Holder could go to any of the Muster stations to check in A Muster Region cannot contain another Muster Region e3 eMerge User Programming Guide 38 Region cont MO WWA O C AUX Input C AUX Output jj Elevator Action all Controller TJ Region Passback Violations Anti PassBack is intended to prevent Card Holders from sharing credentials to gain access With timed anti passback a Passback Violation event occurs when the same credential is used to request access to the same door or region more than once during a set period of time 1 4 Select the level for the Default eie aa Violation _ Passback Violat e None Timed Anti Passback is not J Default Violation in use default setting AntiPassBack Interval a min 0 99
54. arch Current DB O UserPC SD Card Current DB amp SD Card C WEB _ Reader Door Contact C Rex _ Elevator _ Elevator Out Aux Input _ System _ Network O O C ACK message Date Date amp Time C Time Local Time _ Event Description yj User Name _ item_user_field C Card Number vi Message z Device Name i Log Type i Port ACK C ACK Message _ Reader Type To rint the lo report click Print Log Type Device Name meu User Name Event Description Message p g report To save the log report as a text 09 29 2015 file click CSV The data will be 09 29 2015 downloaded through the browser sill 09 29 2015 09 28 2015 09 28 2015 Door Locked Door Unlocked Door Locked Door Unlocked Door Unlocked Door Unlocked by Man Trap 61 e3 eMerge User Programming Guide Log Management mi D i f D Log Log Report e Log Management Log Management allows the operator to create a backup of all log events The backup can be scheduled and directed to the SD card on the Controller or an FTP location The backup can also be manually generated to a CSV or DB file e Log gt Log Management Automatic Log Backup 1 Enter the percentage of log fullness JP T to trigger a pop up message or Automatic Backup or Message pop up when log is 90 full automatic log backup Pop up message Log data is full Please data export 2 The message displayed ca
55. ashboard are a Graphic Floor gt Floor Setting To add a new floor plan graphic No Floor Name Description Floor Image 2 a for the floor in the a eos sno Floor Name field iin a 3 Enter a description for the floor graphic in the Description field 4 To add a new image click Choose en File and select the graphics file ipuina J NOTE The maximum JPG BMF or PNG fs image size is 685 pixels wide by 340 i pixels high and the maximum file size ipti Setting is 150KB Browse Max 150KB jpg bmp 5 To save the graphic click Add png Viewing a Graphic 1 Click on a floor graphic in the table Foar Mams Snr pat dood opie 2 The floor graphic will be previewed inca sersa tise on the screen tn Deleting a Graphic 1 Click on a floor graphic in the table 2 Click Delete to remove the entire Floor gt Floor Setting floor graphic record or click Edit Basic then Delete Image File to just Adding Floor delete the graphic and leave the aa Setting floor name and description Engineering Dept Max 150KB jpg bmp png Floor Name Description Floor Image Default Floor Default Floor CEA 57 e3 eMerge User Programming Guide 2 User Data Export Li User Data Export IC D User Data Export Lie User Data Import User Data Export provides the ability to export Card Holder data to a comma separated value CSV file Exporting User Data Data Transfer gt User Data Export
56. ating Output opens and Single Pulse closes in a cycle for the time Aux Output entered Description e E On Will latch the output ON Mode On Time jo hrs fo min 1 sec when activated from the dashboard Floor l Press Stop on dashboard turn output OFF e E Off Will latch the output OFF when activated from the dashboard Default State Press Stop on dashboard to turn Repeating output back ON Aux Output 4 Assign the output to a Floor for casein viewing on the Dashboard Mode On Time 0 _ hrs 0 __ min sec 5 Select the Default State of the celle 5b se output energized or de energized i aval arapeeSoak c 6 Click Save Default State De Energized W 33 e3 eMerge User Programming Guide Elevator Action Optional WE AANO WADA D ED D 1 mM Elevator Action Feature Door fhiii Elevator AUX Input C AUX Output Iiii Elevator Action hall Controller bal Region Elevator Action allows the operator to assign the elevator outputs to Access Levels Adding an Elevator Action rp apg eee 1 Select an elevator output from the li st an d cli ck E dit Elevator Output Elevator Access Level 2 Enter a name and additional A Floors5 8 information as required eT Y NOTE In order to activate floors first Floorss 8 assign an access level to doors Floors6 8 3 Select the Access Level that will be Floors5 8 used to grant access to the floor s Floors5 8 Doors mus
57. backup Backup Type UserPC Q SDCard FIP Server Immediate Backup 1 Select User PC SD Card or FTP Server for the backup device 2 To run an immediate backup click Backup e3 eMerge User Programming Guide 48 Backup oO Restore o Save amp Reboot ELEG W Factory Default Restore allows the operator to restore the system from a backup Restoring the System System Setting gt Restore 1 Select the location of the restore file User PC SD Card or FTP Server Basic Restore Type User PC 2 Enter a file name and path or click i Browse to choose the file to restore from 3 Click Restore 49 O SD Card C K e3 eMerge User Programming Guide Ga Save amp Reboot T Save amp Reboot Update J Backup oO Restore o Save amp Reboot al Factory Default Saving Data 1 Click Save Data to force a data save on the Controller Sane LANA 2 Enter a super administrator Super Administrator Password sd password and click OK z OK Close Saving Data and Rebooting 1 Click Save Data amp Reboot to force a data save on the Controller and Reboot Super Administrator Password 2 Enter an super administrator password and click OK OK Close e3 eMerge User Programming Guide 50 Ga Factory Default OWA Oe e Update Backup Restore 0 Save amp Reboot baal Factory Default Factory Default will erase ALL Card Holder data logs IP setti
58. can be utilized to auto scan and detect the card format Default Card Format Card Format Name 1 Click Decoder Description 2 Select the door where the card will Total Bit Length be auto scanned 3 Click Card Scan and present the F mty Code Start Bit card or multiple cards to the Card Number Start Bit reader 4 The new card format will populate the data fields 5 Click Add to save the new format NOTE The decoder takes a best guess S based on existing card formats Without knowledge of the card s start bits and Default Card Format length it cannot guarantee proper Card Format Name decoding 7 Facility Code Start Bit Card Number Start Bit Facility Code oe ee 7 gt NewMake 25 Bit New style 25 bit cards Facility Code Facility Code Length Card Number Length a 24 1 Y l Total 37 Bit Description Facility Code Length Card Number Length ill t fil Card Number 15 e3 eMerge User Programming Guide Access Level Oe AONO X Card Holder CardFormat P AccessLevel BadgingLayout 2 Badging Template An Access Level establishes which doors the Card Holder can access and when they are allowed to access them Access Levels are comprised of a time schedule and door s i Administration gt Access Level Adding an Access Level ministration gt ss 1 Click New Access Level Name Description ScheduleNa
59. ct the User options that will be O 11 Select the Floor options that will be available for the user available for the user B Select All 12 Select the System Setting options DVR Setting View Add Modify Delete that will be available for the user DVRA View B View 13 Select the Network options that will be available for the user 14 Select the Data Transfer options Oo that will be available for the user Sora E Select All 15 Select the Log Report options that Card Holder O Add J Modify Delete Card Format D View J Add Modify Delete will be available for the HSER Card List O Add Modify Delete Access Level View J Add Modify Delete 16 Select the Device Setting options that will be available for the user 17 Select the Client amp Site Setting options that will be available for the user Schedule E Select All Schedule O Add Modify Delete Holiday Group View J Add C Modify Delete Unlock Schedule O Add Modify Delete Event Action B Select All Event Action O Add Modify Delete Elevator Action View 18 Select the Group Setting options that will be available for the user aici Dashboard Display ACK 19 Select the Quick Menu options Threat Level E Select All that will be available for the user Threat Level G Modify Threat Level Setting O view O Modify Delete 20 Click Save B Select All User Define Field O View Modify Delete Web User Account View Add
60. d type Require Event 317 Access Denied without Deadman z AC knowledgment 400 Granted 1170302 Scheduled Log Backup to SD Card Failed 1170303 Log Backup to SD Card was Successful 1170304 Log Backup to SD Card Failed 1170401 Scheduled Log Backup to FTP was Successful 1170402 Scheduled Log Backup to FTP Failed 1170403 Log Backup to FTP was Successful 1170404 Log Backup to FTP Failed acknowledgment if they occur Use the Search button to find specific event codes or event code names ANS HA HHH HRHBKABSD HUMOUWOUNWOOUOODUOOUODVODVOUOUOD CSTR STC STR CSS CST SSS e3 eMerge User Programming Guide 24 Threat Level Optional GD RH CAA NEI g Threat Level Feature g Threat Level 4 Threat Level Setting Threat Levels are used in systems to modify existing unlock schedules and Access Level privileges Ihe system has five pre defined Threat Levels The names of each can be changed to match installation requirements Current Threat Level Setting Threat Level gt Threat Level 1 Click Edit to change or disable the Threat Level 2 Un check the Turn Off Threat Current Threat Level checkbox to enable Threat Levels Click to H IG H Change 3 Use the Threat Level dropdown g menu to select a Threat Level 4 Click Save V NOTE When the Threat Level is Off defined Access Level privileges and unlock schedules operate normally Basic Threat Level z Check to tum off Threat Levels Basic Threat
61. de is required to use this feature Refer to the DVR manual for programming information DYR gt DYR View DVR Live Viewer Search Viewer T A CH FQCH S a E E a N FUCHS t CA a N FUCHS y EA r EG a E a E 4 ak q1 a q B i x 4 ooo oe ee ee eae lefieothom beothom jhitheothom e3 eMerge User Programming Guide 10 DVR Setting Optional NE EVED OPW Ct aa DVR Setting Feature lt I Camera View te Camera Setting DVR View Oo DVR Setting DVR Setting allows configuration of digital video recorders A license upgrade is required to use this feature Adding a DVR 1 Click New and enter a name and DVR gt DVR Setting description for the DVR Select a DVR brand from the drop down list If your DVR is not listed select Other Enter the additional information for the DVR This information is provided in the camera s installation manual Click Add NOTE Digital Watchdog DVR integration is only compatible with Microsoft IE9 or higher 32 bit version only The DVR setting must be configured using IE and will require installation of an ActiveX component Refer to DVR manual for additional information Basic Name Description DR Brand IP Address Live Port Search Port Web ID Web Password FTP Port FTP ID FTP Password Event Port Max Channel Viewer Type Deliver Event Deliver Recording Digital Watchdog v
62. der No Vv Report gt Smart Report Setting Date Time Cardholders Cards Cards No card restriction Ask for cards when report is run Use the following specification Unselected Cards 454 TT TIT Unselected Card Types 36 bit card format 37 bit card format Casi Rusco 40bit HID 26bit 68 O Smart Report Setting Elevators Events Output Format Selected Cardholders Selected Cardholder Groups Elevators Events Output Format Selected Card Types Save Report Save Report an Smart Report Setting Cont I eee ll Report FA Access Report I System Report SmartReport Smart Report Setting Doors Door Filters Report gt Smart Report Setting e Select one of the door filter a Date Time Cardholders Cards Elevators Events Output Format Save Report options for no restriction ask Doors when report is run or use manual door selection Threat Level No door restriction selection or doors on selected ST ee ARA AATA floors Use the following specification 5 Click Next to setup the Elevators Ale Unselected Doors ers pT Door 2 Door 3 Door 4 Unselected Threat Level Selected Threat Level Doors belonging to floors Unselected Floors Default Floor Report gt Smart Report Setting Elevators Elevator Filters Date Time Cardholders Cards Doors Elevators Events Output Format Save Report e Select one of the elevator filter options for all elevators ask when report is run or use
63. e Access Granted One Time User DeadMan Region Checked DVR Tag Aux Output Trouble Aux Output Repeat Aux Input Trouble Door Locked Door relock by toggle Door relock by relock user Door relock by passage Granted Elevator System Startup Client Data Update Client Replace Power OK Power Fault Client Connected Starting the Client Update License Changed Floor Map Setting Change Camera Data Delete DVR Data Added DVR Configuration Update Card Holder Data Delete Card Holder Data Delete All Card Data Delete One Time Card Reset Card Format Data Delete Access Level Data Added Access Level Data Update Event Action Data Delete Threat Level Update Schedule Data Delete Holiday Data Added Holiday Data Update Dashboard M Unlock Dashboard Lock Aux Output Data Update Dashboard Aux Stop Floor Data Delete Controller Data Update Software Update Failed Data Backup Successful Restored from backup Data Export Complete Web User Account Data Added Web User Account Data Update Log Data Reset Log Data Backup Failed Threat Level Setting Data Update FTP Configuration Updated SMTP Configuration Updated Skin Change Unlock Schedule Data Delete Elevator Data Update Dashboard Elevator Stop User Role Data Added User Role Data Update User Group Data Delete Door Group Data Added Door Group Data Update Access Group Data Delete Site Data Update Web User Added Web User Update Web User Logout
64. e Schedules for the rule to be active 3 Select the Type of Card Holders individual or group 4 Search or choose Card Holder s or Door Manager Groups for the rule Use the arrows to move the name s in and out Two Man Rule v Enable Schedule 1 Schedule 2 Schedule 3 SelectType erry Rumsfield Ronnie Gaverty i 4 With Two Man Rule enabled two Card Holders must present credentials at the same time in order to unlock the door Credentials must be presented in the proper sequence Card Holder 1 then Card Holder 2 or access will be denied o o a a Rule 2 Enter a Time in seconds allowed for the second Card Holder to present their credentials 3 Search or choose Card Holder 1 for the rule Use the arrows to move the name s in and out 4 Search or choose Card Holder 2 for the rule Use the arrows to move the name s in and out Saving Changes i Enable Card Holder 1 Card Holder 2 Time i e O i erry Rumsfield a E oa Ronnie Gaverty Monte Dezman Gerry Rumsfield Ronnie Gaverty After making any edits be sure to click Save at the bottom of the page e3 eMerge User Programming Guide 88 Access Levels An Access Level establishes which doors the Card Holder can access and when they are allowed to access them Access Levels are comprised of a time schedule and door s Wizard Language Administration gt Access Level vV License Access Leve
65. e is set Card Holders can only re enter the Region by properly exiting the Region first or by being Graced in The log message for a Passback Violation is Denied Region Anti Passback Violation Anti Passback can also be set for a door not assigned to a Region using the Door setup menu but if the door is later assigned to a Region the Region Anti Passback setting will override the door setting 39 e3 eMerge User Programming Guide Region cont Be Q VO MVOC QOW O Door f jj Elevator C4 AUX Input C AUX Output Iiii Elevator Action a Controller bal Region Tailgate Violations A Tailgate Violation occurs when an authorized Card Holder is granted access and one or more persons pass through the open controlled access point in addition to the authorized Card Holder Tailgating is detected when a Card Holder tries to exit a Region or enter another Region from a Region which they were never granted access to enter 1 Select the level for the Default Device Setting gt Region Violation Tailgate Violation e None Tailgating feature is turned Default Violation off default setting e Soft Triggers an alarm then grants access e Hard Triggers an alarm and prevents access through the Out Reader and or the In Reader of a sub Region Tailgate Violation Operation Notes Inthe Door setup menu the Out Reader Region must be set to the Region with the Tailgate Default Violation turned ON e Hard Tailgat
66. ed DNS is an Internet service that translates domain names into IP addresses The IP address of a DNS is required if using NTP time server or SMTP e mail Editing Network Settings Network Setting gt IP Address 1 Select DHCP or Static Skip to Step 5 if using DHCP IP Type DHCP Static 2 Enter a static IP Address for the Controller to use on the LAN siika 721611182 The first three values must match Subnet Mask 255 255 255 0 other devices on the network e g Gateway 192 1 0 x DNS Server 1 172 16 111 84 Optional 3 Enter the Subnet Mask address ate cea Optional The Subnet Mask determines e aati a the manual address mask used by the Controller typically HTTPS C Check Box to Enable Required for RMC 255 255 255 0 HTTPS Port Default 443 4 Set the Gateway Address to match the address of the router that connects the LAN to the Internet Enter the IP address of the DNS Server 1 optional use for NTP time server access or SMTP e mail connection Enter the IP address of the DNS Server 2 optional use for NTP time server access or SMTP e mail connection Enter the HTTP Port number for remote Web browser connection typically 80 Check the HTTPS checkbox if RMC is being used If using HTTPS edit the HTTPS Port number if required default is 443 10 0 When finished entering the network settings click Save amp Reboot GONDA Upload cer key For installations using Hyper
67. egion Out Reader Name Out Reader Type Out Reader Region i Enable Door Contact Name Door Contact Held Open Time ADA Open Time Rex NO Unsupervised YV Rex Activates Door Lock W 27 Door Lock Mode Default Floor Default Floor Default Floor Default Floor e3 eMerge User Programming Guide Door Cont Ae QYEAYO aie adG gt Z fi 1 Door t ii Elevator C AUX Input C AUX Output IG Elevator Action a Controller 7 Region Door Lock Mode 1 Choose a Door Lock Name to name the lock for logging Door Lock Mode 2 Confi Door Lock Mod Door Lock Name Configure Door Loc ode as ie Door Lock Mode z Normal Vv Normal l Door Lock Mode e Normal Lock activates in response ere to a valid access request and REX Re Lock on Open O unlocks door for exit Door Unlock Time as e Locked Does NOT grant access in response to REX card or code e Locked w REX Remains in locked Man Trap mode ONLY REX will activate Door Lock Name leck l Door Lock Mode i Door Lock Mode _ Exterior e Unlocked Door will remain Man Trap Mode l ERE l unlocked at ALL times Default Status e Man Trap Sets the door lock for use in conjunction with another door to create a man trap passage Door Unlock Time sec A Man Trap will only allow one door to be opened if the other door is locked When Man Trap is selected Man Trap Mode options appear Re Lock on Open O e
68. erge User Programming Guide Select Type Individual Select Level Never Expired Activation Date gt 09 23 2015 Inactive Reason Expiration Date gt 12 31 2015 Card Number Card Format Card Status 142 11 IEI 26 Bit Wiegand Active 14 A Card Format AS i Access Level i Jee Card Format X Card Holder 2 Badging Layout J i al Badging Template A 6 j Card Format displays the default card formats of the system Ihe system has several pre configured card formats If the desired card format is not listed a custom format may be added Description Facility Code Total Bit Length Default Test Card Format Honeywell standard 40bit format 5 5 J KW KW Casi Rusco standard 40bit format os rn rn ha K K Jy r IEI 26 Bit Wiegand Facility code 11 1234567890 1 Card Format Name Vv Adding a Card Format Administration gt Card Format 1 Click New S No Card Format Name 2 Enter a name and description Een optional for the card format noes aia 3 Enter the facility code bit length HID 35bit card number bit length and parity Casi Rusco 40bit information as provided by the card Lenel 36bit manufacturer IEI 26 Bit Wiegand 4 Click Add to save the changes Rc ome NOTE It is recommended to delete card a formats that are not in use Using the Decoder If the desired card format is not listed as a default format the Decoder
69. ese Company Name ings ike Address 1 123No Steet Registering the System Address 2 2 i 1 Enter the Installing Dealer City l information required for upgrade State requests i 92009 2 Enter the Site Information This e 2009 is optional but recommended to Contact Name document the site information in Phone Number the system Cell Phone 555 768 0546 3 When finished editing click one of yaj the action buttons g required infomation e The Register button will attempt to send an email with the information pm A Site Infomation optional provided Company Name Rents 4 U x e The Save button will save the E contact information without sending an email e The Clear button will clear the data in the form A ddrnanna 4 95 e3 eMerge User Programming Guide Start Save Start Save is the command to save the initial settings for the system and select which page appears on logon Wizard Language VV License VV E IV Holiday Group Congratulation You are all set V E Click Save button iV Door Default Page Dashboard V W Save to SD Card Access Level Save E Card Holder Card VEG vV Dealer Registration Editing Startup Page e Default Page Use the dropdown selector to choose the page that the system will display upon logon e Save to SD Card Leave this box selected to save the startup information to the SD card Un check to save the startup
70. ess from iPhone iPad and Android devices Intuitive Wizard allows for ultra fast setup e Configure the system to perform automatic functions on specific days and times For example schedule when a door is unlocked or when an employee can gain access to the facility e Create view and print customized reports using the reporting tool e Create a set of instructions that the system will follow when an event occurs For example when a door is forced open the system can be instructed to turn on a camera and display a graphic e Configure the system to store custom information about each Card Holder such as phone number or employee ID e Define up to 30 holidays for use as special schedules For example schedule a door to remain locked during a holiday e Configure the system to send email and text message notifications e Software updates for new feature and product enhancements System Information System Capacities Doors Portals pave ow 36 64 128 optional key upgrades Maximum readers 8 4 in 4 out 72 36 in 36 out 128 64 in 64 out 256 128 in 128 out Inputs 384 Outputs 256 Card holders 15 000 Cards per person NO Card formats NO Access Levels NO Time Schedules NO Simultaneous system users Online transactions 15 000 Elevator N A NOTE Using optional expansion Controllers D N x e3 eMerge User Programming Guide 2 2 Software Layout System Server Software The Controller br
71. f the Software for compliance with these terms at any time upon reasonable notice In the event that such audit reveals any use of the Software by you other than in full compliance with the terms of this Agreement you shall reimburse Nortek Security amp Control for all reasonable expenses related to such audit in addition to any other liabilities you may incur as a result of such non compliance 3 Your license rights under this EULA are non exclusive License Restrictions 1 You may not make or distribute copies of the Software or electronically transfer the Software from a Nortek Security amp Control product to another Nortek Security amp Control product or to a computer or over a network 2 You may not alter merge modify adapt or translate the Software or decompile reverse engineer disassemble or otherwise reduce the Software to a human perceivable form 3 You may not sell rent lease or sublicense the Software 4 You may not modify the Software or create derivative works based upon the Software 5 You may not export the Software into any country prohibited by the United States Export Administration Act and the regulations thereunder 6 In the event that you fail to comply with this EULA Nortek Security amp Control may terminate the license and you must stop using this Software and stop operating the Nortek Security amp Control eMerge product with all other rights of both parties and all other provisions of this EU
72. floors to an existing Basic elevator client Elevator Name JLE 2 For Elevator Name enter a name for the elevator Device Setting gt Elevator 5 Select the Reader Type that Description Client Elevator 1 matches the elevator reader from the dropdown list 6 Select the Elevator Lock Mode from the dropdown list 7 Select the Threat Level from the dropdown list 8 Select the Floor from the dropdown list 9 Click Save Elevator Name Description Extended Elevator Lock Mode Floor Elevator Client gt Factory Default Setting Elevator Client Extension Check to add more floors to existing elevator client Reader Type Keypad or Card v Elevator Lock Mode Normal v Threat Level gt LOW 7 Floor Default Floor v EV 2 Client Elevator 1 Master Normal Default Floor EV 1 Client Elevator 1 Master Normal Default Floor 1 31 e3 eMerge User Programming Guide Aux Input Ce AUX Input DG DY O Door jj Elevator C4 AUX Input C AUX Output Iiii Elevator Action al Controller TL Region Aux Input displays the inputs that are assigned to the system Click on the input name to view or edit the settings of the input Editing an Input Device Setting gt Aux Input 1 Select the desired input and click T F dit No Client Port Description Input Type Default Floor NO Unsupervised Default Floor NO Unsupervised Default Floor NO Unsupervised Default Floor NO Unsupervised 2 Enter a
73. ge printing window 3 Click Print Badge to select the printer and print out the badge e3 eMerge User Programming Guide Administration gt Card Holder Click New to Enter a Card Holder First Name D Access Leve S Card Access Level 12345 11 Test Last Name O Cord M ID Click to Use Picture File First Name Monte Middle Name a O OE Last Name Dezman Browse Phone Number eosss1234 Click n Cell Phone to Take Snapshot E mail Picture Option Advanced Option C Use ADA Timing _ Exempt Web User Account None V Threat Level gt LOW Vv Personal First Name Monte Badge Middle Name Last Name Dezman Phone Number gt 760 555 1234 Cell Phone gt 760 555 0000 E mail gt montedez cloud com _Print Badge Template 12 A Card Holder Cont j CW 4 X Card Holder Card Format ig Access Level 2 Badging Layout rl Badging Template Assigning a Card to an Existing Card Holder 1 Select the Card Holder from the main window 2 Click Add Card Card Format 3 Select the appropriate Card Format from the drop down field Card Number 4 Enter the Card Number or use the Auto Scan feature Auto Scan 5 Choose the Auto Scan door reader where the card will be presented V NOTE Card scanner can only be used with doors 1 4 6 Click Card Scan and present the card to the reader The new card number will populate
74. gion MISC Information DeadMan Region N DeadMan Interval min 5 999 HazMat Region N HazMat Aux Input HazMat Region Notes e The log message for a hazardous materials alarm is Hazmat Region Lockdown Region Name e For a HazMat Unlock Card in the Card setting for a Card Holder select HazMat Unlock for the Card Type 43 e3 eMerge User Programming Guide wi User Defined Field i f amp User Def Field User Role f i Web User Account User Def Field User Defined Fields are 20 custom data fields that can be assigned to a Card Holder profile This field can be used for employee ID or other specific information unique to a Card Holder Editing User Defined Fields 1 Click Edit to enter user defined fields Basic 2 Enter any custom data in the 20 whale User Info fields User Info 3 3 Click Save when finished User Info 5 User Info 7 User Info 9 User Info 11 User Info 13 User Info 15 User Info 17 User Info 19 User Setting gt User Def Field Employee ID License Plate Auto Make User Setting gt User Def Field Basic User Info 1 User Info 3 User Info 5 User Info 7 User Info 9 User Info 11 User Info 13 User Info 15 User Info 17 User Info 19 e3 eMerge User Programming Guide Employee ID gt License Plate q4 User Info 2 User Info 4 User Info 6 User Info 8 User Info 10 User Info 12 User Info 14 User Info 16 U
75. han the Door Threat Level Ignore REX E Anti Passback I Check to enable Timed Anti Passback Select a time in seconds Timed Anti Passback Enable Time D sec to disable a credential after it has Room Anti Passback Enable Resetaftr O sec been used to grant access Check to enable Room Anti Passback Select a time in seconds to disable access to a room after access has been granted to the room 87 e3 eMerge User Programming Guide Doors Cont First Man In Rule First Man in Rule unlocks a door when first Card Holder enters First Man In Rule 1 Check Enable to use a First Man In Rule 2 Select a Grace Period to allow the selected first man Card Holder s access minutes before a scheduled start time 3 Select up to three time Schedules for the rule to be active 4 Select the Type of Card Holders individual or group 5 Search or choose Card Holder s or Groups for the rule Use the arrows to move the name s in and out Manager In Rule z Enable Grace Period Schedule 1 Schedule 2 Schedule 3 SelectType Card Holder Minutes 0 no grace period Individual V Monte Dezman z gt Monte Dezman Gerry Rumsfield Ronnie Gaverty 4 With Manager in Rule enabled if a Card Holder designated as a Door Manager has not entered the system within a specific Manager In Rule time period the door will not unlock 1 Check Enable to use the Manager In Rule 2 Select up to three tim
76. ick Print Badge to launch the badge printing window Click Print Badge to select the printer and print out the badge Assigning a Card to an Existing Card Holder 1 Select the Card Holder from the main window 2 Click Add Card Card Format 3 Select the appropriate card format from the drop down field Card Number 4 Enter the Card Number or use the Auto Scan feature Auto Scan 5 Choose the Auto Scan door reader J where the card will be presented NOTE Card scanner can only be used with doors 1 4 Click Card Scan and present the card to the reader The new card number will populate the data field Advanced Option C Use ADA Timing Exempt Web User Account None Y Threat Level LOW vV Personal ID sa First Name Monte Middle Name Last Name Dezman Phone Number gt 760 555 1234 Click to Print Cell Phone gt 760 555 0000 E mail gt montedez cloud com Template Click Add Card Card Number amat Card Status Card Enrollment Auto Scan gt 3 bit card format 36 bit card format Card Format ae IE 26 Bit Wiegand Card Number a Card Scan _ Key Number Card Status Active Card Type gt Normal ka aaa AS Card Format 7 Card Number Card Scan ae Card Status Active V or click Card Scan Card Type gt Normal ka 91 e3 eMerge User Programming Guide Card Holder Cont Card Status 7 Select the card
77. information to the Controllers memory e3 eMerge User Programming Guide 96 5 Site Map The Site Map is an overview of the pages within the Controller interface Each page listed in the site map is linked to the page it represents This allows the user to quickly jump to any section listed in the site map Site map Site Map Button i Dashboard Camera DVR Dashboard Camera View Dashboard Setting Camera Setting DVR View DVR Setting a Administration Schedule Card Holder Schedule Event Action Card Format Holiday Group Event Code Access Level Unlock Schedule Badging Layout One Time Unlock Schedule Badaging Template p Event Action Threat Level Threat Level Threat Level Setting d Device Setting User Setting a System Setting wal Network Setting ba Floor Door User Def Field Update Elevator User Role Backup Aux Input Web User Account Restore Aux Output Reboot Elevator Action Factory Default Controller Region Data Transfer 5 Log Report User Data Export Log Report User Data Import Log Report Access Report Log Management System Report Smart Report Smart Report Settin Group Table ij Client amp Site Card Holder Group Client Management Door Group Client Replacement Camera Group Site Management Access Level Group Site Device 97 IP Address Floor Setting FIP SMTP Time Server RMC e3 eMerge User Programming Guide 6 Lost Card Lost Card is a utility to quic
78. ing is only for the most secure facilities and requires In Readers and Out Readers at all doors e With Hard Tailgating if a Card Holder leaves a Region by any other means than authorized controlled exiting a Tailgate Violation will occur at any other door until either 1 the Card Holder presents their credential to a Muster Reader this removes the Tailgate Violation and adds the Card Holder to the Muster Region or 2 the Card Holder is Graced by the system administrator using the Grace Tab on the Dashboard they will be placed in the Region where they swiped their card to enter or 3 the Card Holder can somehow get back into the Region the system thinks they Occupy and then exit that Region correctly e Hard Tailgating applies to the Region the system thinks the Card Holder is in and will deny access to any other non connected Region For example suppose there are two separate buildings Bldg1 is Region 1 with Hard Tailgating Bldg2 is Region 2 with Soft Tailgating If the Card Holder enters Bldg 1 and occupies Region 1 then leaves Bldg 1 without being granted exit access the Card Holder will be denied access to any other door trying to re enter Bldg1 entering or exiting Bldg 2 However if the Card Holder enters Bldg 2 first and Occupies Region 2 then leaves Bldg 2 without being granted exit access the Card Holder will create a warning but will be allowed access into either building e3 eMerge User Programming Guide 40 if Reg
79. input 5 Enter the ID and Password of the raen Super Administration Account This vib e epee is the top level administration account J vse idee for the Controller Power Fault Input NC Unsupervised V 6 Set the default language page and Super Administration Account floor for the account ID Click Save Password vV IMPORTANT It is highly advised to change f Change Password the Super Administrator password Keep it J Confirm Password in a Safe place This password cannot be Email recovered if it is lost or forgotten Language Default Page Default Floor Floor Show Firmware IF Firmware migration oy 35 e3 eMerge User Programming Guide H I Door Tt ii Elevator C AUX Input 1 CACEN 7 f J C AUX Output i Elevator Action Controller _ Region A Region is an area a zone you want to limit security into and or out of Entering or exiting a Region occurs through controlled door access The In Reader and Out Reader if used for a door can each be assigned a Region The primary usage for Regions is to count or control occupancy and implement door access sequence rules to prevent or track access to areas if the correct door access sequence is not met A Region can contain up to five nested partitions called Sub Regions and Child Regions each controlling access to a sub section of the Parent Region Region Rules Overview e Regions contain Credentials
80. ion E Client Reboot e Reboots selected Client 77 e3 eMerge User Programming Guide D Client Replacement Optional Feature ClientManagement Client Replacement Client Replacement is used when an existing client Controller is replaced with a new client Controller Replace a Client Client amp Site Setting gt Client Replacement 1 Power off bad Client board and disconnect from network At the i N EE Dashboard the Door and Aux icons are grayed out No Name Type IP Address MAC Address 2 Install replacement Client board on the network and set the IP to the same address as the bad client 3 Save the MAC address of the new client V NOTE Leave the Server address set to 0 0 0 0 4 On the Controller go to Site Management gt Client Replacement Select the IP MAC of the bad client and click Edit button 5 Change the MAC address to the replacement client 6 Login to the replacement client and set the server IP and click Save 7 After the replacement client connects the dashboard icons will change from gray to color e3 eMerge User Programming Guide 78 te Logout GOL te Logout Logout prevents unauthorized persons from working in the system but still allows all access control operations to continue To secure the system be sure to logout when finished Logging Out of the Controller 1 When ready to exit click Logout 2 The Controller will logout the user and return to
81. ion cont Be OVO GeO QOW Oe Door f jj Elevator C4 AUX Input C AUX Output Iiii Elevator Action a Controller bal Region Occupancy Limit Enforcement Occupancy Limit Enforcement counts and or limits restricts the number of Card Holder credentials that can occupy a given Region at the same time The log message for an Occupancy Limit violation is Access Denied Occupancy Limit Violation 1 Select the level for the Default Device Setting gt Region Violation come Tae e None The Controller counts Default Violation occupancy but no action results Damo 3 default setting e Soft When a Card Holder presents credentials to enter the Region and the occupancy limit has been reached an alarm activates and the Card Holder is granted access An alarm will continue to activate for each new Card Holder that presents credentials until the occupancy count falls under the Maximum Occupancy number e Hard When a Card Holder presents credentials to enter the Region and the occupancy limit has been reached an alarm activates and the Card Holder is denied access 2 Enter the Maximum Occupancy number 0 99999 allowed in the Region Entering 0 results in no occupancy limit the Controller just counts occupancy Occupancy Rules e When a Card Holder presents a credential to a reader and is granted access the Card Holder credential enters into the Region specified by the In Reader and exits the Card Holder credential from
82. isclosure by the US Government is subject to restrictions as set forth in this EULA and as provided in DFARS 227 7202 1 a and 227 7202 3 a 1995 DFARS 252 227 7013 c 1 ii OCT 1988 FAR 12 212 a 1995 FAR 52 227 19 or FAR 52 227 14 as applicable Manufacturer Nortek Security amp Control LLC 1950 Camino Vida Roble Suite 150 Carlsbad CA 92008 6517 Outside of the USA Consumer End Users Only The limitations or exclusions of warranties and liability contained in this EULA do not affect or prejudice the statutory rights of a consumer i e a person acquiring goods otherwise than in the course of a business The limitations or exclusions of warranties remedies or liability contained in this EULA shall apply to you only to the extent such limitations or exclusions are permitted under the laws of the jurisdiction where you are located Third Party Software The Software may contain third party software which requires notices and or additional terms and conditions Such required third party software notices and or additional terms and conditions are listed below and are made a part of and incorporated by reference into this EULA By accepting this EULA you are also accepting the additional terms and conditions if any set forth therein General This EULA shall be governed by the laws of the appropriate United States jurisdiction without giving effect to principles of conflict of laws In each case this EULA shall be construed and
83. k Use schedules to identify the hours and days when inputs outputs or door access are in operation Assign holiday groups to the schedule to control when operations occur on holidays There is one default time schedule of A ways which is defined as 00 00 23 59 seven days per week Wizard IV eer Schedule gt Schedule No Name vV License Weekly Employee 00 00 00 00 vV Card Format Always 00 00 24 00 Holiday Group VW Schedule ar a Schedule Click New Schedule gt Schedule 2 Enter the desired name and description optional for the schedule Adjust the sliders for the Start Time and End Time on days when the schedule is to be active Collapse slider for no access on that day Optional Select a holiday group to allow access on the holidays in the group If a holiday group is selected identify a start and end time for holiday access Click Add to save the new schedule Note To create a schedule with a Midnight Crossing e g 16 00 to 00 30 click Reverse Deleting a Schedule 1 Select the schedule to be deleted 2 The schedule will appear Scroll to the bottom of the page and click Delete 3 Click OK to confirm the deletion Editing a Schedule Select the schedule to be edited and click Edit Perform the desired changes to the name description and time intervals Day Sunday Monday Tuesday Wednesday Thursday Friday Saturday Holiday Select Holiday Group
84. k for use in conjunction with another door to create a man trap passage A Man Irap will only allow one door to be opened if the other door is locked When Man Irap is selected Man Trap Mode options appear Door Lock Mode Door Lock Name Default Status Door Lock Mode Re Lock on Open O Door Unlock Time f sec Door Lock Name Man Trap Door Lock Mode Door Lock Mode _ Exterior Man Trap Mode Pair Door Default Status Re Lock on Open 0O Door Unlock Time sec e Unlock No security on Entry or Exit e Secure Entry Free Egress Two options both options use card access to enter the Exterior Door Option 1 allows free exit through the exterior door Option 2 requires card access to exit through the exterior door e Restricted Entry and Exit Four options all options use card access to enter the Exterior Door Option 1 allows free exit through the exterior door Option 2 requires card access to exit through the interior door Option 3 requires card access to exit through the exterior door Option 4 requires card access to exit through either door e Pair Door Select the second Man Irap door that is closest to the secured area 3 Select the Door s Default Status This setting will be determined by the lock type energized or de energized 4 Assign Re Lock on Open if desired This will re lock the door immediately upon opening the door 5 Adjust Door Unlock Time if desired This is the
85. kly identify the Card Holder associated with a lost card The operator may enter any card number to view the Card Holder that is associated with the card reset a One Time Card or override a Violation Grace mm ost Gard way Lost card Basic Card Number One Time Card B Card Number Card Status Violation Grace a CardHolder Card Number DeadMan Region Grace B CardHolder Card Number Lost Card Button m ost Gard e3 eMerge User Programming Guide 98 Expiration Date DateTime Last Name Occupies Violation Region da Lost card Cne Time Card z Card Humber Viclalion Grace User 2005 2005 User 2007 2007 DeadMan Region Grace T and Hoke User 2000 2000 ard Number ame 115 AUTEN E Only Used First Name Current Destination Tag DateTime Curent 2015 10 73 1408733 2015 10 23 145755 Daadiian 2015 10 29 149043 D 7 License License displays the basic system information of the Controller Please print the License Key for future needs or in case of a factory default V NOTE You can use the MAC address to recover the license key for the system Visit htto Wwww e3upgrade com and enter the MAC address and follow the directions 2 License bce Model Enterprise gt 0 32 07c Door 128 gt FO D1 4F 00 00 8C gt A10972E34EF68C7CF4652C748214B07888D953F00C803F80A5 7A539F 0064E63C System Information and Upgrade Options System Information Press the
86. known V NOTE This function only updates the firmware of the Controller To update the client firmware refer to Client Management WARNING Servers and Clients MUST be using the same firmware version V NOTE Gateway and DNS IP addresses must be configured to access the update server Refer to IP Address to configure these settings 47 e3 eMerge User Programming Guide Update Backup Restore T Save amp Reboot W Factory Default Backup enables the system backup and defines the backup device time and location of the backup The system automatically assigns a name E to the backup at the time of the backup with the following format MDDHHMMSS System Schedule Backup YYYY 4 digit year e MM 2 digit month a l a gt DD 2 digit day Backup Time 00 00 Backup Occurs Every Day at the Selected Time e HH 2 digit hour e MM 2 digit minutes Immediate backup e SS 2 digit seconds Backup Type UserPC OSDCard FTP Serer Scheduled Backup 1 To change the backup settings click Edit System Setting gt Backup 2 Set alog name for the backup in the Name field 3 For automatically scheduled daily backup check the Enable checkbox O 4 Select SD Card or FTP for the ee AEE backup device Backup Time 00 00 Y Backup Occurs Every Day at the Selected Time System Schedule Backu 5 Choose a time for the daily backup with the Backup Time selector 6 Click Save immediate
87. l Camera List multiple cameras 4 Click Add to save the changes Editing a Camera Group 1 Click on the Camera Group name to edit pi Click Edit Group Table gt Camera Group 3 The Camera Group name can be No Camera Group Name Camera List edited 4 Cameras can be added or removed New O OG me from the group 5 Click Save Deleting a Camera Group Group Table gt Camera Group 1 Click on the Camera Group name to delete p TEREE Selecting a Camera 2 Click Delete 3 Group to Edit No Camera Group Name Camera List 1 Parking Lot Cams Nev Camera Group Name V9 tA 4 i Parking Lot Cams Editing a Camera n Group Table gt Camera Group No Camera Group Name Camera List 1 Parking Lot Cams Nev Camera Group Name Ve T 75 e3 eMerge User Programming Guide G Access Level Group Ee ee X Card Holder Group l Door Group lt Camera Group Access Level Group Access Level Group Adding an Access Level Group 1 Click New 2 Enter the desired Group Name 3 For Access Level List select the desired access level or use the search icon to find a access level and click the right arrow to move the access levels to the field on the right Y NOTE Ctrl click or shift click will select multiple Access Levels 4 Click Add to save the changes Editing a Access Level Group 1 Click on the Access Level Group name to edit 2 Click Edit 3 The Access Level Group na
88. l Name gt Daily Workers IV Card Format Description 9 5 Guys x Schedule z Weekly Employee V Select Type gt Individual V 4 Schedule Door List Door 8 Door 6 Door 7 Door 5 Add ancel VV Holiday Group Access Level Reset Card Holder Access Level Name Description Doors ScheduleName Main Door Main Bldg Front Door 8 Always Card Server Room Main Bldg SR Door 5 Always Access Level Name vp VEE Dealer Registration e Start Save Adding an Access Level 1 Click New 2 Enter the Access Level name 3 Assign a time schedule to the Access Level by choosing it from the drop down menu 4 For Door List select the desired doors or use the search icon to find a specific door and click the right arrow to move the doors to the field on the right 5 Click Add to save the changes 89 e3 eMerge User Programming Guide Card Holder Use Card Holder to enter card users in the database An image may be assigned to the Card Holder for identification purposes Wizard Language Administration gt Card Holder s Name Access Level vV License vV Card Format FirstName MEDS Holiday Group Cord V Ea VES V Access Level Card Holder Card V Network Dealer Registration E Start Save To Add a Card Holder Administration gt Card Holder Individuals who enter the facility are i imme entered in the system as Card Holders Click New to Card Access Level enter a Card
89. ld of a Child would be Class 3 etc When a Class other than Class 1 is selected the Parent Region option will turn into a drop down list Specify the Parent Region for this Child Region from the drop down list Sub Regions Sub Regions function the same as Child Regions except for occupancy counting Sub Regions can report occupancy counts of the Sub Region as well as contribute to the occupancy count of the Parent Region 37 e3 eMerge User Programming Guide Region cont CVO Gn a AG Door jij Elevator C AUX Input C AUX Output Iiii Elevator Action a Controller 0O Region Adding or Editing a Region 1 Click New to add a region or click Edit to modify a region Basic Device Setting gt Region 2 gt For the Region s Name enter up to 30 Basic characters Name Chem Lab In the Description field enter a short description of the Region Select the Depth for the Region Class 1 is the highest Class 2 through Class 5 are Sub Regions or Child Regions each sub Class must physically reside inside the next lower number Class number around it If Parent Region is left empty the default the Region becomes the Parent Region If the Region is Class 2 5 select Sub Region or Child Region s the Parent Region Description Chem Storage Room Depth Parent Region N Only Muster ric B If the Region is used only for Muster Station personnel assembly check Only Muster
90. le E OOA WO 4 ar h One Time Unlock Schedule Schedule Holiday a Unlock Schedule a OneTime Unlock Schedule A One Time Unlock Schedule defines one date and time to automatically unlock one selected door Adding a One Time Unlock Schedule 1 Click New 2 Enter a Name for the One Time Schedule gt One Time Unlock Schedule Unlock Schedule N To Add a One Time Unlock nlock Device Date Time 3 Select the Date when the door will L Schedule Click New Door 1 09 26 2015 08 00 16 00 be unlocked Nev Name T r tA 4 Select the Start Time and End 1 Time for the unlock period 5 Click the drop down to select a door to unlock Click Add to create the One Time fi Unlock Schedule SiatTine EY EndTime 16 v 00 yV Schedule gt One Time Unlock Schedule Editing a One Time Schedule 1 Select the desired One Time Unlock Schedule and click Edit Unlock Dovice 2 Make the changes desired 3 Click Save Unlock Device Date Door 1 09 26 2015 Deleting a One Time Schedule 1 Select the desired One Time Unlock Schedule to be deleted 2 Click Delete A confirmation box will appear 3 Click OK to confirm Carpet Cleaning 99 26 2015 Select One Time Unlock 98 00 1600 Schedule and Click Edit Door 1 Name Unlock Device Date Carpet Cleaning Door 1 09 26 2015 Name z 1 e3 eMerge User Programming Guide 22 3 Event Action l Event Action ID Event Code
91. li SystemReport O smartReport Smart Report Setting Smart Report Setting is a function that allows creating and saving custom designed system reports with interactive features S 8 8 8 y pP Each element of the report can be customized to suit the installation or management of the installation P 8 Creating a Smart Report Report gt Smart Report Setting 1 Click Create New Report to begin Name setting up a smart report template Smart Report 1 Date Time Report Covers Time Frame e Select one of the time frame options enter any variable data then click Add New Time TP Report gt Smart Report Setting Frame to add the filter to the Smart Report Date Time Cardholders Cards Doors Elevators Events Output Format Save Report Limit Daily Time To Report covers time frame e Select one of the daily time limit options enter any variable data choose to include or exclude these times then click Add New ek or month report This week V No date time restriction Ask for date and time range when report is run The need to click Add new time frame button Time Frame to add the filter to Last days 19 days the Smart Report O Specific Range Start 2015 09 29 00 v 00 7 End 2045 09 29 Include Holidays Add newtime frame e Choose holidays to include in the report with the dropdown selector pa No daily restriction Exclude Holidays Ask for time restriction when report is
92. lters Items that match the filters entered will be included in the report Running a Report 1 Use the Table Name dropdown to select which area of system memory to generate a report from V NOTE The remaining filter options will FirstName vary depending on the Table Name selected ane Doors Elevators Aux In amp Out e Select the filters for the report Number NO Floor Name Description Card Holder e Select the filters for the report Card Holder Number NO Last Name First Name Card Number Card Status Card e Select the filters for the report Card Number Card Status Card Format Card Type Last Name First Name Phone Number Card Holder Access Levels e Select the filters for the report Card Holder Number NO Last Name First Name Card Number Access Level Door Number NO Door Name Access Level Doors e Select the filters for the report Access Level Number NO Access Level Reader Number NO Reader Name Door Number NO Door Name Door Groups e Select the filters for the report Door Group Number NO Group Name Access Level Door Number NO Door Name Occupancy e Select the filter for the report Region Muster e Select the filter for the report Region 2 To generate the report click Search Report gt Report To print the report click Print KY To save the log report as a text file click CSV The data will be downloaded through the browser De
93. me 2 Enter the desired Access Level Client 3 Access to Doors 9 12 Door 9 Door 11 Name and Description optional Client 2 Access to Doors 5 8 Door 5 Server Access to Doors 1 4 Door 3 All Access to All Doors Door 3 Door 5 Door 9 Door 11 Test Door 11 Access Level Name Vv 3 Assign a time schedule to the Access Level by choosing it from the Schedule dropdown menu 4 Select Group or Individual for the Access Group Type 5 For Door List select the desired doors or use the search icon to find a specific door and click the right arrow to move the doors to the field J Administration gt Access Level Adding Access on the right Access Level Name Level Note Ctrl click or shift click will select Description multiple doors re i Y 6 Click Add to save the changes Select Type Editing an Access Level Door List 1 Select an Access Level from the list and click Edit 2 Make the desired edits 3 Click Save to save the changes Deleting an Access Level Administration gt Access Level 1 Select an Access Level from the list and click Edit para F Click Delete Access Level Name Standard 3 A confirmation window will pop wii iittala up click OK to delete the Access SORAN as Level Select Type Individual Select Reader Door 1 Door 2 Door 3 Door 4 Administration gt Access Level Access LevelName Description Regular Shift Schedule Always vV Editing Access Select Type Individual V
94. me can be edited 4 Access Levels can be added or removed from the group 5 Click Save Deleting a Access Level Group 1 Click on the Access Level Group name to delete 2 Click Delete e3 eMerge User Programming Guide Group Table gt Access Level Group No Access Level Group Access Level List Name Access Level Group Name V ee Group Table gt Access Level Group Customer Service Group Name Access Level List Standard Group Table gt Access Level Group No Access Level Group Access Level List Name Standard Access Level Group Name V E 1 Customer Service Group Table gt Access Level Group Group Name Customer Service Access Level List Standard No Access Level Group Access Level List Name Customer Service Standard Access Level Group Name V LS 1 Group Table gt Access Level Group Group Name Customer Customer Service Access Level List i Access Level List No Access Level Group Name Customer Service Standard Access Level Group Name V Ce 1 76 a ae D Client Management Optional R GGN EG Se Ge GE Ce CED Gi O Feature Client Management ye ClientManagement Client Replacement Client Management allows the user to enable disable connect disconnect and update client Controllers associated to the main Controller s server database Client Management allows user to
95. mera is Camera Brand Other not listed select Other Browser Address 76 147 92 201 3 Enter the additional information Control Address 75 147 92 201 for the camera This information is provided in the camera s installation ID admi manual gamn IP Port gt 8082 Browser Address The IP address of 722 pee the camera Door Front Door v e Control Address The IP address of Enable PTZ the camera IP Port The port to obtain video Image URL from the camera Motion JPEG URL ID User name of the admin or live view user of the camera Description Camera Brand ATC Sony SNC DF40N DF40P Front Door e Password Password of the admin or live view user of the camera e Door The door on the system that linked to the camera for triggering events e Enable PTZ Enable if the camera has PTZ capability 4 Enter the camera s Image URL and Motion JPEG URL This information is typically listed in the camera s installation manual Click Add V NOTE Live video is dependent on IP camera settings and browser capabilities Not all camera and browser configurations are supported a 9 e3 eMerge User Programming Guide DVR View DVR View Optional a AMMO Feature lt Camera View Camera Setting m DVR View DVR Setting DVR View allows the user to select defined IP DVR video matrix and different DVR views A license upgra
96. n be edited in the Pop Up Message field Name Enable 3 Enter a name for the backup in the Name field 4 To enable the automatic log backup check the Enable checkbox Backup Device 5 Select either SD Card or FTP for ee ere the Backup Device Off 6 Click Save Backup Device SD Card Schedule Log Backup e 00 00 Backup Occurs Every Day at the Selected Time 1 Enter a name for the backup in the Name feld 2 To enable the scheduled log backup check the Enable checkbox 3 Select either SD Card or FTP for E ial the Backup Device 4 Select the daily time for the scheduled log backup from the O e3 DataBase Backup Time dropdown Log gt Log Management Log Reset 1 To delete all log data in memory Automatic Backup click Reset Automatic Backup or Message pop up when log is full 2 Enter an administrator password to Log data is full Please data export confirm the log reset R ERNE 3 Click OK Manual Log Backup 1 Select the backup type either CSV or Database format Backup Device 2 Click Backup Log Schedule Backup O Backup Device SD Card FIP Backup Time 00 00 Y Backup Occurs Every Day at the Selected Time e3 eMerge User Programming Guide 62 alls Report N a ij AccessReport lli SystemReport smartReport Smart Report Setting Report allows the operator to view and print or save a report of items in the systems memory The report is created using Fi
97. nc Time dropdown Skip to Step 7 Sync Time Zone 5 Select the time zone at the E Tef Controller s installation location from the Sync Time Zone dropdown Server Address User entered time server V Sync Time 130 Minute V 6 For manual date and time setting enter the current date and time in the Date and Time fields 7 To enable Daylight Saving Time DST select ON Enter the DST start and end dates in the two fields 8 Click Save 55 e3 eMerge User Programming Guide RMC ji f IPAddress H rr lt lt SMTP Timeserver H RMC The Remote Management Console RMC server is used to manage multiple Controllers usually from a remote location If using RMC the settings for the RMC PAR servers URL Domain UUID and Device ID will need to be edited in the _ eY Controller Server URL gt mmcserver com Editing RMC Settings Domain UUID 96894B10 7F3A 48B9 A25A 26AEDB6C70F3 1 Click the Connect to RMC Device ID ProControl demo checkbox if an RMC server will be used 2 Enter the RMC Server URL 3 Enter the RMC Domain UUID cain mnie ispaleny sb 4 Enter the Device ID Basic 5 Click Save to keep the changes Refer to the RMC User Guide P N 620 100701 for details on RMC setup i and operation e3 eMerge User Programming Guide 56 GA Floor Setting F Floor Setting Floor Setting allows the operator to load and view floor plan graphics which will be displayed on the D
98. needs or in case of a factory default Click Next Wizard V ee Enterprise Software Version 0 32 07a V Device Type Door 64 MAC Address FO D1 4F FF FF 61 V Holiday Group i License Key gt A55CF5A569E0D75727484A5A55AC4A1 E89F 41D90DD1 1EESEEBBOC6CCAS4B6CF6 Vi ce ac 81 e3 eMerge User Programming Guide Card Format Card Format displays the default card formats of the system The system includes several pre configured card formats If the desired card format is listed click Next to advance to the next Wizard item If the desired card format is not listed click New to enter the format information and click Add JV NOTE It is recommended to delete card formats that are not in use Wizard vV Language Administration gt Card Format No Card Format Name Description Facility Code vV License HID 26bit Test Card Format Honeywell 40bit Honeywell standard 40bit format HID 35bit Casi Rusco 40bit Casi Rusco standard 40bit format Lenel 36bit IEI 26 Bit Wiegand IEI 26 Bit Wiegand Facility code 11 36 bit card format y Card Format Holiday Group VV N UO A Q0 N OO OO vV 37 bit card format a Access Level Using the Decoder If the desired card format is not listed as a default format the Decoder can be utilized to auto scan and detect the card format 1 Click Decoder inistrati Card a 2 Select the door where the card will guiiiaiamalalicnaieniealiia be auto scanned
99. ngs and license key Il IMPORTANT I Write down the license System Setting gt Factory Default key prior to performing a factory default WARNING It will take 3 5 minutes to factory default a system DO NOT power down when performing a factory default Make sure the electrical power source is reliable when performing a factory default Any loss of power during a factory default can damage your system Resetting to Factory Defaults 1 After heeding the above warnings click Factory Default 2 Enter an Super Administrator your license key before proceeding Password and click OK 3 Wait 3 5 minutes for the system to Do You Really Want to Factory Default reset and reboot 4 Enter the license key when the super Administrator Password oo O O system restarts Factory Default Will Erase ALL User Data Logs IP Settings and License Key Make sure you have your data backed up and a copy of 51 e3 eMerge User Programming Guide O IP Address CA IP Address a J IPAddress H FTP SMTP D Timeserver H RMC The Internet Protocol IP Address area sets all of the network settings including the IP Address Subnet Mask Gateway Address DNS Server 1 DNS Server 2 and HTTP Port DHCP assigns an IP address to the Controller automatically on a network containing a DHCP Server a router will typically have a built in DHCP Server When Static is selected options IP Address Subnet Mask Gateway must be enter
100. nput Door Unlocked Door unlock by toggle Door lock by Hazmat Door unlock by passage Unregistered Card System Reboot Client Reboot Tamper OK Tamper Fault Send Email Client Disconnected Starting the Software Update Certificate Change Camera Data Added Camera Data Update DVR Data Delete Card Holder Data Added Card Holder Data Update Card Data Added Card Data Update Card Format Data Added Card Format Data Update Access Level Data Delete Event Action Data Added Event Action Data Update Schedule Data Added Schedule Data Update Holiday Data Delete Door Data Update Dashboard E Unlock Aux Input Data Update Dashboard Aux Trigger Floor Data Added Floor Data Update Software Update Successful Backup Scheduled Updated Data Backup Failed Data Restore Failed Data Import Complete Web User Account Data Delete Log Management Data Update Log Data Backup Successful Log Data Merge IP Address Configuration Updated Update Server Configuration Updated ACK message Unlock Schedule Data Added Unlock Schedule Data Update Dashboard Elevator Trigger User Define Field Data Update User Role Data Delete User Group Data Added User Group Data Update Door Group Data Delete Access Group Data Added Access Group Data Update Site Device Data Update Web User Delete Web User Login Invalid Login Attempt Smart Report Set Data Added Smart Report Set Data Update Smart Report Run Start M Smart Report Run Failed Time Settings Change Grace Complete F Event
101. nt may be reproduced copied adapted or transmitted in any form or by any means without written permission from Nortek Security amp Control LLC Corporate Office Nortek Security amp Control LLC 1950 Camino Vida Roble Suite 150 Carlsbad CA 92008 6517 Tel 800 421 1587 760 438 7000 Fax 800 468 1340 760 931 1340 Technical Support Tel 800 421 1587 Hours 5 00 AM to 4 30 PM Pacific Time Monday Friday 100 Copyright 2015 Nortek Security amp Control LLC 3 eC SERIES BDF NORTEK SECURITY amp CONTROL USA amp Canada 800 421 1587 amp 800 392 0123 760 438 7000 Toll Free FAX 800 468 1340 www norteKcontrol com 620 100240 E
102. older 2 or access will be denied 1 Check Enable to use the Two Man S F Enable tme J 2 Enter a Time in seconds allowed pois q for the second Card Holder to im Gerry Rumsfield ne 3 Search or choose Card Holder 1 for a the rule Use the arrows to move the Card Holder 2 Q name s in and out r Ep Monte Dezman 4 Search or choose Card Holder 2 for Ronnie Gaverty ya the rule Use the arrows to move the name s in and out Saving Changes After making any edits be sure to click Save at the bottom of the page e3 eMerge User Programming Guide 30 Optional Ce CVS 1 SD GED aD RED id Ses CED SUE Feature C AUX Input C AUX Output Iiii Elevator Action al Controller lal Region Elevator displays the elevators that are assigned to the system Click on the elevator name to view or edit the settings of the elevator Each elevator cab requires an elevator module which activates up to 8 outputs for controlling access to floors Access to more than 8 floors requires additional elevator modules Editing an Elevator Device Setting gt Elevator 1 Click the desired elevator from the list and click E dit Elevator Name Description Extended Elevator Lock Mode EV 2 Client Elevator 1 Client EV 1 Client Elevator 1 Master Default Floor 3 For Description enter a description for the elevator 1 4 Select Elevator Client for the factory default setting for the client or Elevator Client Extension to add more
103. or to trigger the e m door alarm output if the door is Output Output held open longer than the Held Open Time Select Energized or De energized for the Default State of the Door Status Alarm Output Select an Output to use for the Door Status Alarm Output Click to enable an Alarm Shunt output to operate when access is granted to the secured door Select Energized or De energized for the Default State of the Alarm Shunt Output Select an Output to use for the Alarm Shunt Output Threat Level 1 Anti Passback Select the highest Threat Level allowed before the door will Threat Level LOW v automatically lock Ignore REX O Note An unlocked door will lock if the System Threat Level is greater than the Door Threat Level including doors that are unlocked by schedule Note The Dashboard M Unlock and E Unlock may be used to unlock a door that has been locked due to elevated system Threat Level Check Ignore REX to ignore input from a Rex button if the current System Threat Level is higher than the Door Threat Level Anti Passback Check to enable imed Anti Timed Anti Passback C Enable Time 0 sec Passback Select a time in seconds to disable a credential after it has a C Enable Resetafter sec been used to grant access Check to enable Room Anti Passback Select a time in seconds to disable access to a room after access has been granted to the room 29 e3 eMerge User P
104. owser interface includes two methods available to the operator for programming and navigation These methods include using the Toolbar and Wizard The Toolbar provides access to all configuration options whereas the Wizard provides access to the core system components The following illustration shows the location of the Toolbar and Wizard icon Dashboard gt Dashboard ALS ALG Al7 Al User User User ras Gs ee Te Floor Auto Monitor Threat Level Status OFF E01 E02 EO3 EO 4 EOS EO6 EO7 EO8 09 16 2015 13 21 07 09 15 2015 17 08 29 09 15 2015 17 08 28 09 15 2015 17 08 28 09 15 2015 17 08 27 09 15 2015 17 08 27 09 15 2015 17 08 27 JoL Device Name Local Time User Name Event Code Event Description 09 15 2015 17 08 29 406 09 15 2015 17 08 28 406 09 15 2015 17 08 28 406 09 15 2015 17 08 27 406 09 15 2015 17 08 27 110328 09 15 2015 17 08 27 110328 Door Closed Door Closed Door Closed Door Closed Aux Output Off Aux Output Off The first time the system is run the Wizard will run automatically Ihis allows setting of the following core system components System Language Selection System License Card Format Setup Holiday Group Setup Schedule Setup Door Setup Access Level Setup e Card Holder Setup Card Setup e Network Setup e Dealer Registration e System Startup Screen Selection Refer to the Section in the rear of this manual Using the Wizard for details on each Wizard screen 3 e3
105. rk Setting gt SMTP checkbox to enable TLS Enter your SMTP mail server user ID your email address in the ID Use SMTP Service M field SMTP Server _ Enter your SMTP mail server __ Default 587 Password in the Password field Test the system by entering an email address in the Send to E mail Address field and click Test Send to E mail Address Password Click Save to save the changes NOTE The Controller s Gateway IP address and DNS address must be properly configured to be able to send email Refer to IP Address to configure these settings e3 eMerge User Programming Guide 54 amp Time Server EDE IPAddress H Fe D3 smTP D Timeserver H RMC Time Server provides the ability to sync the system to a time server or manually set the time JV NOTE Gateway IP and DNS IP Network Setting gt Time Server addresses must be configured to access public time servers Refer to IP malls Manual Time Setti Address to configure these settings sacs Sync Time Zone Eastem Editing Time Server Settings 1 To manually set the system time select Manual Time Setting Skip to Step 6 2 To use a time server select NTP Server Synchronization eS gt Time Server 3 Select one of the time servers from the Server Address drop box cn NTP Server Synchronization may require DNS server Manual Time Setting 4 Select the time period for the time server synchronization from the Sy
106. rogramming Guide Door Cont Door Tt ii Elevator C AUX Input C AUX Output FA Elevator Action a Controller 7 Region First Man In Rule First Man in Rule unlocks a door when first Card Holder enters 1 Check Enable to use a First Man In Rule v Enable 2 Select a Grace Period to allow the Grace Period Minutes 0 no grace period selected first man Card Holder s Schedule 1 access minutes before a scheduled PEPE start time Schedule 3 3 Select up to three time Schedules for the rule to be active nee Card Holder 4 Select the Type of Card Holders mp Monte Dezman a PemieCoey Ronnie Gaverty 5 Search or choose Card Holder s or 4 Groups for the rule Use the arrows to move the name s in and out Manager In Rule With Manager in Rule enabled if a Card Holder designated as a Door Manager has not entered the system within a specific time period the door will not unlock Check Enable to use the Manager 1 In Rule n 2 Select up to three time Schedules neah for the rule to be active ariana 3 Select the Type of Card Holders oo individual or group SelectType 4 Search or choose Card Holder s or Door Manager Groups for the rule Use the arrows to move the name s in and out Ronnie Gaverty Two Man Rule With Two Man Rule enabled two Card Holders must present credentials at the same time in order to unlock the door Credentials must be presented in the proper sequence Card Holder 1 then Card H
107. run The need to click Add new time frame button Restrict to time range Start oo foo v End oo V foo V e Choose holidays to exclude in the report with the dropdown selector n Duie Exclude specified time 2 Click Next to setup the Card 7 ia Include specified time Holder filter 67 e3 eMerge User Programming Guide an Smart Report Setting Cont gt lh Report li Access Report lh System Report O smart Report Cardholders Cardholder Filters Select one of the Card Holder filter options for no restriction ask when report is run or use manual Card Holder selection with Card Holders or Card Holder groups Attribute Filter Select a Card Holder Attribute then choose a logical Relation and Value for the filter Check the Ask checkbox for a prompt at run time Click Add Attribute to add the filter to the Smart Report 3 Click Next to setup the Card filter Cards Card Filters 4 Click Next to setup the Doors filter Select one of the Card Holder filter options for no restriction ask when report is run or use manual Card Holder selection with cards or card types e3 eMerge User Programming Guide Report gt Smart Report Setting Date Time Cardholders Cards Cardholders No cardholder restriction Ask for cardholders when report is run Use the following specification Unselected Cardholders Unselected Cardholder Groups Attribute Cardhol
108. s the door for the ijmamadiemeimmmade time defined as the Door Unlock Time MENTVE default 3 seconds OOWOUUEE E Unlock Unlocks the door until the A AJAJAJA li ks Lock AlS AJG Al7 PYE user clic l AHF Trigger Activates the selected auxiliary Lock Locks the door AOS Ao AO ADE ooog or elevator output according to the Aux E Unlock Output settings see Aux Output to Door congue output setings Selector M Unlock EO 1 E02 EO3 EO4 EOS EO6 EO7 E08 t t t t t t t t W og Eg We a on m Time Local Time Device Name User Name Event Code Event Description 09 16 2015 15 25 10 09 16 2015 15 25 10 Door 3 Door Locked 09 16 2015 15 25 07 09 16 2015 15 25 07 Door 3 601 Door Unlocked 09 16 2015 15 25 07 09 16 2015 15 25 07 Door 3 11211 Dashboard M Unlock 09 16 2015 15 24 53 09 16 2015 15 24 53 Door 3 600 Door Locked 09 16 2015 09 01 18 09 16 2015 09 01 18 Client 2 Client Connected 09 16 2015 09 01 17 09 16 2015 09 01 17 Client 1 Client Connected e3 eMerge User Programming Guide 6 Dashboard Setting ep aay 4 Dashboard Setting J Dashboard Dashboard Setting The Dashboard Setting dialog provides default icons for each door input and output Customize the visual layout of the system by dragging the icons to the floor image see Floor Setting to add an image of the floor Dashboard gt Dashboard Setting Floor GOGoKoCCEE Icons can be Dragged Over a EO1 E02 ZEE EZ ZE E06 EO7
109. scription Floor Server Door Default Floor Server Door Default Floor 63 e3 eMerge User Programming Guide an Access Report a lh Report FA Access Report ll SystemReport SmartReport Smart Report Setting Running an Access Report 1 Select Door or Elevator for the Type to search for Door Elevator 09 27 2015 09 29 2015 2 Select the starting and ending date range for the search in the Date fields Door AN Card Holder 3 Select the Door Card Holder and bmg m Access Level to search for in the Condition fields DateTime Device Name Card Holder Card Number 4 To generate the report click Search 5 To print the report click Print 6 To export the report as a file click CSV The data will be downloaded through the browser e3 eMerge User Programming Guide 64 dhi System Report an System Report Qe I eee lh Report li Access Report ll SystemReport SmartReport Smart Report Setting The System Report displays the current memory allocation of the database The report runs when System Report is RRR selected ort gt System Report 0 020 3 15 000 0 003 3 120 000 Card Format 25 000 8 32 Access Level 0 400 1 250 Schedule 1 200 3 250 Holiday Group 16 667 10 60 User Def Field 30 000 6 20 Transaction 0 101 101 100 000 E Backed up 0 0 000 Ml New since last backup 101 0 101 _ Available 99 899 99 899 Disk
110. ser Info 18 User Info 20 User Info 2 User Info 4 User Info 6 User Info 8 User Info 10 User Info 12 User Info 14 User Info 16 User Info 18 User Info 20 User Role Fe ri amp User Def Field Y User Role 5 Web User Account User Roles define the access privilege of the operators A User ID is assigned to each person who will work with the Controller Each User ID can be configured to have different system privileges System privileges determine the options the user has available in the Controller browser interface Setting User Roles 1 Select the User ID to edit and click Edit 2 Enter the options and name for the Basic settings 3 Select the Dashboard options that will be available for the user 4 Select the Camera options that will be available for the user 5 Select the DVR options that will be available for the user User Setting gt User Role 6 Select the Administration options a that will be available for the user Default User Role 7 Select the Schedule options that Dashboard B Select All will be available for the user Dashboard Door Control O Aux Output Control O Acknowledgement O Acknowledge All 8 Select the Event Action options Dashboard Setting J View J Modify that will be available for the user E Select All 9 Select the Threat Level options that Camera Setting 0 View O Add Modify Delete will be available for the user Camera View B View 10 Sele
111. soersee ties 84 DOCS coos ee heehee eee 85 Access LevelS 000 eee eens 89 Card Holder 000 0c ee eee ees 90 ald ne eee bere a ae wee ee ee ee eee 93 Network 6 oink aac nbaen een eee eee eas 94 Dealer Registration 055 95 Start Save 0 cee es 96 5 Site Map occ dete cece Heeestudutays 97 6 Lost Card 4 2 cscckuenecedusscesntanes 98 7 License 00000 cece eee eee 99 8 End User License Agreement 100 e3 eMerge User Programming Guide 1 Introduction This manual contains information regarding the programming and configuration of the eMerge access control system The system offers multi station ability to secure doors manage access of personnel create and analyze reports and monitor the system remotely from any Web browser All monitored activity at the facility is recorded in the system memory providing a record of all Card Holder entries and exits input detection and security or fire detection if desired The system can be seamlessly scaled up via software keys to provide increased door and reader capacity enhanced features and higher level capabilities General Features The following is a feature summary of the Controller e Browser based management enables system status and updates from any location with any supported OS using any supported browser Chrome ver 22 or higher IE 9 0 or higher Firefox ver 13 or higher Safari ver 5 1 7 or higher e Supports acc
112. t Save Report Report Name Smart Report 1 Limit report to lines of data Start a new page every lines Unselected user role Selected user role 72 Card Holder Group X Card Holder Group D TOT int Door Group ee X Card Holder Group lt Camera Group Access Level Group A Card Holder Group contains individual Card Holders for the purposes of common access and reporting Adding a Card Holder Group 1 Click New 2 Enter the Card Holder Group Name 3 For Card Holder List select the desired card holders or use the search icon to find a specific card holder and click the right arrow to move them to the field on the right Y Y NOTE Cirl click or shift click will select multiple Card Holders 4 Click Add to save the changes Editing a Card Holder Group 1 Click on the Card Holder Group name to edit 2 Click Edit 3 The Card Holder Group name can be edited 4 Card holders can be added or removed from the group 5 Click Save Deleting a Card Holder Group 1 Click on the Card Holder Group name to delete 2 Click Delete Group Table gt Card Holder Group No Card Holder Group Name Card Holder List Card Holder Group Name V i l Group Table gt Card Holder Group Adding a Card Group Name Holder Group Card Holder List O see Gerry Rumsfield Ronnie Gaverty Group Table gt Card Holder Group No Card Holder Group Name Card Holder List
113. t be assigned to the Floors5 8 Access Level for the Access Level Floors1 4 to be active Floors1 4 4 Click Save to save the changes hee NOTE When a valid credential is r presented to the reader the elevator Floors 1 4 outputs will be activated as configured Floors1 4 in the Elevator Action For example if Fiat al Elevator outputs EO 1 EO 2 EO 3 and EO 4 are assigned to Floors 1 4 Access Level all four outputs will activate when as the valid credential is presented This as allows the Card Holder to select floors 1 4 in the elevator cab Elevator Name e3 eMerge User Programming Guide 34 Controller a Controller j Z j Door t ii Elevator C AUX Input C AUX Output IG Elevator Action a Controller J Region Controller displays information pertaining to each system Controller Click on the Controller name on the list to view or edit information Device Setting gt Controller Editing the Controller Info No Name Controller Location Tamper Type Power Fault Type Time Zone 1 Select the Controller and click Edit 1 Server NC Unsupervised NC Unsupervised 2 Enter a desired name and location optional 7 3 Select the appropriate Tamper Input value This will be determined by the eE wiring configuration of the input 4 Select the appropriate Power Fault aaa Input value This will be determined icomotertscaion pasemon meranen 1rin n ration pe Vale cone oenomon ie Admin By Controller
114. tabase allowing the user to generate view and print log reports Report Provides system and event reporting smart reports feature customizable report formats Group Table Enter cards door and camera groups as well as configure Access Level groups _ Site Management View and edit client site and device information option to add a custom logo Logout Logs the operator out of the system e3 eMerge User Programming Guide 4 3 System Programming Connect to the Controller Open a web browser on a local computer and enter the IP address of the Controller Default 192 168 0 250 The browser presents the login page as shown 1 Enter the User ID e Default User ID admin 2 Enter the Password e Default Password admin 3 Click Login Just in case a link is displayed to send a message to the eMerge Super Administrator for a forgotten password V NOTE The Super Administrator password is set in Device Settings gt Controller 5 e3 eMerge User Programming Guide Dashboard 16 CJ Dashboard Dashboard Setting Click the Dashboard icon to open the Dashboard window which displays incoming events and allows users to view acknowledge and clear events The Dashboard allows the operator to monitor real time activities in the facility for example use of a valid card or a door forced open The Dashboard also provides the ability to manually lock and unlock doors and activate outputs M Unlock Unlock
115. te mi y Layout Visitor Badge xmil Template name Visitor Badge Templa X xml FieldName First Name FieldName FieldName3 Last Name we FieldName4 Cell Phone yl e3 eMerge User Programming Guide 18 Schedule Imz k 4 E A A Schedule Holiday a Unlock Schedule fy OneTime Unlock Schedule A Schedule is a combination ofa time interval and one or more days of the week Use schedules to identify the hours and days when inputs outputs or door access are in operation Assign holiday groups to the schedule to control when operations occur on holidays There is one default time schedule of Always which is defined as 00 00 23 59 seven days per week are a Schedule Schedule gt Schedule Click New 2 Enter the desired name and description optional for the schedule 3 Adjust the sliders for the Start Time and End Time on days when the schedule is to be active Collapse slider for no access on that day 4 Optional Select a holiday group to s allow access on the holidays in the group If a holiday group is selected identify a start and end time for holiday access 5 Click Add to save the new schedule vV Note To create a schedule with a Monday Midnight Crossing e g 16 00 to Ty 00 30 click Reverse Wednesday Deleting a Schedule Tiri 1 Select the schedule to be deleted Friday 2 The schedule will appear Scroll to Saturday the bottom of the page
116. th e Choose the number of characters wide for the column Addcolunm Sort Order e Select a number for the sort order the lower the number the higher output will be in the sort results or select None for no sort priority for the column Column Order e Use the arrow buttons to rearrange the column order of the Smart Report e Click Remove to delete a column from the Smart Report 9 Click Add Column to add a column to the Output Format configuration window 10 Click Next to finish setting up the Smart Report 71 e3 eMerge User Programming Guide an Smart Report Setting Cont O Smart Report Setting O smart Report h Access Report ll System Report il Report Save Report Saving the report saves all the filter and SR column options from the other Smart Report Setting tabs Save Report e Enter a Report Name for the customized Smart Report e Enter the maximum number of lines to limit the report length Enter the number of lines allowed for each page of the report A form feed will occur when this line count is reached Allow Access To e Choose which User Roles will be allowed to run the Smart Report 11 Select Save Only to save the customized Smart Report without running the report Select Save and Run to save the customized Smart Report and run the report e3 eMerge User Programming Guide Date Time Cardholders Cards Doors Elevators Events Output Format Save Repor
117. that are owned by Card Holders Because Card Holders can have multiple Credentials a Card Holder could exist in multiple Regions at the same time but a Credential can only exist in one Region at a time e Once the Card Holder enters a Region they remain in the Region for occupancy until they enter another Region or exit the Region by presenting a Credential on the out reader e A Region can contain Sub Regions and Child Regions that are contained inside the main Region e Anti Passback and Tailgating rules are applied to Regions A maximum of 125 Regions are supported on a system Examples of Regions Regions should be programmed to suit the controlled access requirements and the expected Card Holder locations as they move about the installation e Example 1 A company has a room with its building that is used to store hazardous chemicals That room can become a Hazardous Region within the Building Region and restrict access to a limited number of Card Holders e Example 2 A company has four buildings at its facility By making each a Region and using occupancy an administrator can locate what building a Card Holder is in if there is an emergency e3 eMerge User Programming Guide Device Setting gt Region No Name Description 1 Chem Lab Chem Storage Room Nanevy n nmum Device Setting gt Region Name Description Depth Parent Region Only Muster Default Violation AntiPassBack Interval
118. the Login screen 79 e3 eMerge User Programming Guide 4 Using the Wizard The Wizard allows the user to configure the basic settings of the system Advance through each setting by clicking the Next button The Wizard will launch automatically the first time the system is run Visit the Wizard at any time by clicking the icon in the lower left corner of the window Cee a RASA O A y Ae A AR y A Ey A y y A SERAIT AT m OA OOC OCOC OCOC OCOC 0T OTI Orimewercers X Wizard Gi Language amp Country Exit the anii GSES Wizard English vV License Spanish VEGELJ Holiday Group United States Canada V Eau Brazil 4 Door O Mexico Access Level Card Holder a Card k VEC Click Next to Advance Dealer Registration Start Save TROP V NOTE When programming various elements of the system do not use the same name for multiple items e g use Door 1 Door 2 etc V NOTE Do not use special characters lt gt amp Y IN e3 eMerge User Programming Guide 80 Language x Use Language to select the country and language where the system will be located Click Next to advance Wizard VW Language English License 4 Spanish IV Holiday Group United States v Card Format Canada V Eu Brazil v Door O Mexico e Access Level License License displays the basic system information of the Controller Please print the License Key for future
119. the data field Card Status 7 Select the current Card Status Card Type 8 Select the function for the card with Card Type dropdown Card Status Card Enrollment Auto Scan Card Format Card Number Key Number Card Status Card Type gt Normal ka AAE nA Choose the Auto Scan Door Auto Scan l Card Format Card Number Co EE Key Number Card Status Active w Card Type gt Normal ka Card Enrollment Auto Scan Card Format Card Number Co E Key Number usas E Card Type Stolen Inactive Card Enrollment Auto Scan Card Format Card Number EN Key Number Card Status Card Type Select the Card Type 13 e3 eMerge User Programming Guide O Card Holder Cont OEN O A lie X Card Holder CIETY X Card Holder Card Format P Access Level 2 Badging Layout ajl Badging Template Access Level 9 For Select Type select Individual or Group access level 10 For Select Level select the desired access levels or use the search icon to find a specific access level and click the right arrow to move the access level to the field on the right Activation Date 11 Choose an optional activation and expiration date for the card 12 Click Save to assign the card to the Card Holder The added card will show on the card list for the Card Holder Click Add Card to add additional cards for the selected Card Holder e3 eM
120. update the firmware of the clients The firmware for an individual Controller may be updated by clicking the Update Client button for the Controller If multiple Controllers are connected to a main Controller the Update All will update all the clients V NOTE It will take 2 5 minutes to update Client amp Site Setting gt Client Management No Name Type IP Address 1 172 16 108 45 2 172 16 108 46 each client During that time the clients will be off line Client 3 Elevator Client2 EV EXT FO D1 4F FF FF 72 F0 D1 4F FF FF 73 0 32 D7e 0 32 07e 4 NOTE Gateway and DNS IP addresses 3 Client1 Door4 172 16 108 43 FO D1 4F FF FF 71 0 32 D07e must be configured to access the Update Server Refer to IP Address to configure these settings v WARNING All Controllers in a system MUST be using the same firmware Client Management version Buttons Managing Clients 1 The installed client s will be listed in the Client Management section 2 Use the Client Management buttons to manage the system clients Global Commands Update All e Updates all connected Clients Data Sync e Re sends Server Database to all Clients Client Specific Commands Client Disconnect e Disables a client in the Server Database ES Client Connect e Enables a client in the Server Database Ea Delete Client e Permanently removes Client from Server Database Update Client e Updates the selected Client firmware to the latest vers

620-100240E e3 User Programming Guide.indd

Contents

Download Pdf Manuals

Related Search

Related Contents